vty: adjust config name for unit-id
Having different names for the same config setting is misleading, so
let's stick to the one used by osmo-bts.
Change-Id: Ide5ceb5db7403a70313405752579e30d7bb94eac
diff --git a/doc/examples/osmo-bsc/osmo-bsc-minimal.cfg b/doc/examples/osmo-bsc/osmo-bsc-minimal.cfg
index 850e29c..f2597b8 100644
--- a/doc/examples/osmo-bsc/osmo-bsc-minimal.cfg
+++ b/doc/examples/osmo-bsc/osmo-bsc-minimal.cfg
@@ -5,7 +5,7 @@
type sysmobts
band GSM-1800
location_area_code 23
- ip.access unit_id 1800 0
+ ipa unit-id 1800 0
trx 0
rf_locked 0
arfcn 868
diff --git a/doc/examples/osmo-bsc/osmo-bsc.cfg b/doc/examples/osmo-bsc/osmo-bsc.cfg
index eec154d..926951b 100644
--- a/doc/examples/osmo-bsc/osmo-bsc.cfg
+++ b/doc/examples/osmo-bsc/osmo-bsc.cfg
@@ -36,8 +36,8 @@
channel-descrption bs-pa-mfrms 5
channel-descrption bs-ag-blks-res 1
early-classmark-sending forbidden
- ip.access unit_id 0 0
- oml ip.access stream_id 255 line 0
+ ipa unit-id 0 0
+ oml ipa stream-id 255 line 0
codec-support fr
gprs mode none
trx 0
diff --git a/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg b/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg
index fd3a349..80a38ba 100644
--- a/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg
+++ b/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg
@@ -35,8 +35,8 @@
channel-descrption bs-pa-mfrms 5
channel-descrption bs-ag-blks-res 1
early-classmark-sending forbidden
- ip.access unit_id 0 0
- oml ip.access stream_id 255 line 0
+ ipa unit-id 0 0
+ oml ipa stream-id 255 line 0
codec-support fr
gprs mode none
trx 0
diff --git a/doc/manuals/chapters/bts-examples.adoc b/doc/manuals/chapters/bts-examples.adoc
index 2dd8b37..58cb3ab 100644
--- a/doc/manuals/chapters/bts-examples.adoc
+++ b/doc/manuals/chapters/bts-examples.adoc
@@ -35,8 +35,8 @@
channel allocator ascending
rach tx integer 9
rach max transmission 7
- ip.access unit_id 1801 0 <4>
- oml ip.access stream_id 255 line 0
+ ipa unit-id 1801 0 <4>
+ oml ipa stream-id 255 line 0
gprs mode none
trx 0
rf_locked 0
@@ -113,8 +113,8 @@
channel allocator ascending
rach tx integer 9
rach max transmission 7
- ip.access unit_id 1800 0 <1>
- oml ip.access stream_id 255 line 0
+ ipa unit-id 1800 0 <1>
+ oml ipa stream-id 255 line 0
gprs mode none
trx 0
rf_locked 0
diff --git a/doc/manuals/vty/bsc_vty_reference.xml b/doc/manuals/vty/bsc_vty_reference.xml
index 9992267..4d25e69 100644
--- a/doc/manuals/vty/bsc_vty_reference.xml
+++ b/doc/manuals/vty/bsc_vty_reference.xml
@@ -2884,7 +2884,7 @@
<param name='<0-63>' doc='BSIC of this BTS' />
</params>
</command>
- <command id='ip.access unit_id <0-65534> <0-255>'>
+ <command id='ipa unit-id <0-65534> <0-255>'>
<params>
<param name='ip.access' doc='Abis/IP specific options' />
<param name='unit_id' doc='Set the IPA BTS Unit ID' />
@@ -2892,7 +2892,7 @@
<param name='<0-255>' doc='Unit ID (BTS)' />
</params>
</command>
- <command id='ip.access rsl-ip A.B.C.D'>
+ <command id='ipa rsl-ip A.B.C.D'>
<params>
<param name='ip.access' doc='Abis/IP specific options' />
<param name='rsl-ip' doc='Set the IPA RSL IP Address of the BSC' />
@@ -2922,7 +2922,7 @@
<param name='<15-100>' doc='and the BTS is being bootstrapped.' />
</params>
</command>
- <command id='oml ip.access stream_id <0-255> line E1_LINE'>
+ <command id='oml ipa stream-id <0-255> line E1_LINE'>
<params>
<param name='oml' doc='Organization & Maintenance Link' />
<param name='ip.access' doc='A-bis/IP Specific Options' />
diff --git a/doc/manuals/vty/libbsc_vty_additions.xml b/doc/manuals/vty/libbsc_vty_additions.xml
index 8685398..cf61961 100644
--- a/doc/manuals/vty/libbsc_vty_additions.xml
+++ b/doc/manuals/vty/libbsc_vty_additions.xml
@@ -11,7 +11,7 @@
<child_of nodeid='14' />
<name>BTS Configuration</name>
<description>This is the configuration of a single BTS.</description>
- <command id='oml ip.access stream_id <0-255> line E1_LINE'>
+ <command id='oml ipa stream-id <0-255> line E1_LINE'>
<description>
Set the IPA stream identifier for the OML link within the IPA
multiplex. Must be the same as on the BTS side. The default
@@ -40,7 +40,7 @@
shall be used by MS in this cell. The default should be enabled.
</description>
</command>
- <command id='ip.access rsl-ip A.B.C.D'>
+ <command id='ipa rsl-ip A.B.C.D'>
<description>
Configure the IP address of the BSC used for RSL. Abis/IP
BTSs, including OsmoBTS and the nanoBTS will be instructed to
@@ -96,7 +96,7 @@
re-selection.
</description>
</command>
- <command id='ip.access unit_id <0-65534> <0-255>'>
+ <command id='ipa unit-id <0-65534> <0-255>'>
<description>
The ip.access unit ID is a parameter of the IPA
Signalling-over-IP multiplex. It is administratively
diff --git a/src/osmo-bsc/bsc_vty.c b/src/osmo-bsc/bsc_vty.c
index 111c910..c4e091c 100644
--- a/src/osmo-bsc/bsc_vty.c
+++ b/src/osmo-bsc/bsc_vty.c
@@ -897,15 +897,15 @@
switch (bts->type) {
case GSM_BTS_TYPE_NANOBTS:
case GSM_BTS_TYPE_OSMOBTS:
- vty_out(vty, " ip.access unit_id %u %u%s",
+ vty_out(vty, " ipa unit-id %u %u%s",
bts->ip_access.site_id, bts->ip_access.bts_id, VTY_NEWLINE);
if (bts->ip_access.rsl_ip) {
struct in_addr ia;
ia.s_addr = htonl(bts->ip_access.rsl_ip);
- vty_out(vty, " ip.access rsl-ip %s%s", inet_ntoa(ia),
+ vty_out(vty, " ipa rsl-ip %s%s", inet_ntoa(ia),
VTY_NEWLINE);
}
- vty_out(vty, " oml ip.access stream_id %u line %u%s",
+ vty_out(vty, " oml ipa stream-id %u line %u%s",
bts->oml_tei, bts->oml_e1_link.e1_nr, VTY_NEWLINE);
break;
case GSM_BTS_TYPE_NOKIA_SITE:
@@ -2180,7 +2180,7 @@
DEFUN(cfg_bts_unit_id,
cfg_bts_unit_id_cmd,
- "ip.access unit_id <0-65534> <0-255>",
+ "ipa unit-id <0-65534> <0-255>",
"Abis/IP specific options\n"
"Set the IPA BTS Unit ID\n"
"Unit ID (Site)\n"
@@ -2201,9 +2201,17 @@
return CMD_SUCCESS;
}
+DEFUN_DEPRECATED(cfg_bts_unit_id,
+ cfg_bts_deprecated_unit_id_cmd,
+ "ip.access unit_id <0-65534> <0-255>",
+ "Abis/IP specific options\n"
+ "Set the IPA BTS Unit ID\n"
+ "Unit ID (Site)\n"
+ "Unit ID (BTS)\n");
+
DEFUN(cfg_bts_rsl_ip,
cfg_bts_rsl_ip_cmd,
- "ip.access rsl-ip A.B.C.D",
+ "ipa rsl-ip A.B.C.D",
"Abis/IP specific options\n"
"Set the IPA RSL IP Address of the BSC\n"
"Destination IP address for RSL connection\n")
@@ -2222,6 +2230,13 @@
return CMD_SUCCESS;
}
+DEFUN_DEPRECATED(cfg_bts_rsl_ip,
+ cfg_bts_deprecated_rsl_ip_cmd,
+ "ip.access rsl-ip A.B.C.D",
+ "Abis/IP specific options\n"
+ "Set the IPA RSL IP Address of the BSC\n"
+ "Destination IP address for RSL connection\n");
+
#define NOKIA_STR "Nokia *Site related commands\n"
DEFUN(cfg_bts_nokia_site_skip_reset,
@@ -2287,9 +2302,9 @@
DEFUN(cfg_bts_stream_id,
cfg_bts_stream_id_cmd,
- "oml ip.access stream_id <0-255> line E1_LINE",
+ "oml ipa stream-id <0-255> line E1_LINE",
OML_STR IPA_STR
- "Set the ip.access Stream ID of the OML link of this BTS\n"
+ "Set the ipa Stream ID of the OML link of this BTS\n"
"Stream Identifier\n" "Virtual E1 Line Number\n" "Virtual E1 Line Number\n")
{
struct gsm_bts *bts = vty->index;
@@ -2307,6 +2322,13 @@
return CMD_SUCCESS;
}
+DEFUN_DEPRECATED(cfg_bts_stream_id,
+ cfg_bts_deprecated_stream_id_cmd,
+ "oml ip.access stream_id <0-255> line E1_LINE",
+ OML_STR IPA_STR
+ "Set the ip.access Stream ID of the OML link of this BTS\n"
+ "Stream Identifier\n" "Virtual E1 Line Number\n" "Virtual E1 Line Number\n");
+
#define OML_E1_STR OML_STR "OML E1/T1 Configuration\n"
DEFUN(cfg_bts_oml_e1,
@@ -5237,11 +5259,14 @@
install_element(BTS_NODE, &cfg_bts_tsc_cmd);
install_element(BTS_NODE, &cfg_bts_bsic_cmd);
install_element(BTS_NODE, &cfg_bts_unit_id_cmd);
+ install_element(BTS_NODE, &cfg_bts_deprecated_unit_id_cmd);
install_element(BTS_NODE, &cfg_bts_rsl_ip_cmd);
+ install_element(BTS_NODE, &cfg_bts_deprecated_rsl_ip_cmd);
install_element(BTS_NODE, &cfg_bts_nokia_site_skip_reset_cmd);
install_element(BTS_NODE, &cfg_bts_nokia_site_no_loc_rel_cnf_cmd);
install_element(BTS_NODE, &cfg_bts_nokia_site_bts_reset_timer_cnf_cmd);
install_element(BTS_NODE, &cfg_bts_stream_id_cmd);
+ install_element(BTS_NODE, &cfg_bts_deprecated_stream_id_cmd);
install_element(BTS_NODE, &cfg_bts_oml_e1_cmd);
install_element(BTS_NODE, &cfg_bts_oml_e1_tei_cmd);
install_element(BTS_NODE, &cfg_bts_challoc_cmd);