Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 1 | /* GSM Mobile Radio Interface Layer 3 messages on the A-bis interface, |
| 2 | * rest octet handling according to |
| 3 | * 3GPP TS 04.08 version 7.21.0 Release 1998 / ETSI TS 100 940 V7.21.0 */ |
| 4 | |
| 5 | /* (C) 2009 by Harald Welte <laforge@gnumonks.org> |
| 6 | * |
| 7 | * All Rights Reserved |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify |
Harald Welte | 912d96d | 2019-05-27 23:17:46 +0200 | [diff] [blame] | 10 | * it under the terms of the GNU General Public License as published by |
| 11 | * the Free Software Foundation; either version 2 of the License, or |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 12 | * (at your option) any later version. |
| 13 | * |
| 14 | * This program is distributed in the hope that it will be useful, |
| 15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
Harald Welte | 912d96d | 2019-05-27 23:17:46 +0200 | [diff] [blame] | 17 | * GNU General Public License for more details. |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 18 | * |
Harald Welte | 912d96d | 2019-05-27 23:17:46 +0200 | [diff] [blame] | 19 | * You should have received a copy of the GNU General Public License |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 20 | * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| 21 | * |
Harald Welte | 912d96d | 2019-05-27 23:17:46 +0200 | [diff] [blame] | 22 | * SPDX-License-Identifier: GPL-2.0+ |
| 23 | * |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 24 | */ |
| 25 | |
| 26 | #include <string.h> |
| 27 | #include <stdlib.h> |
| 28 | #include <errno.h> |
| 29 | #include <stdbool.h> |
| 30 | |
| 31 | #include <osmocom/core/bitvec.h> |
| 32 | #include <osmocom/gsm/bitvec_gsm.h> |
| 33 | #include <osmocom/gsm/sysinfo.h> |
| 34 | #include <osmocom/gsm/gsm48_arfcn_range_encode.h> |
| 35 | #include <osmocom/gsm/gsm48_rest_octets.h> |
| 36 | |
| 37 | /* generate SI1 rest octets */ |
Harald Welte | 428d03b | 2019-05-28 18:46:20 +0200 | [diff] [blame] | 38 | int osmo_gsm48_rest_octets_si1_encode(uint8_t *data, uint8_t *nch_pos, int is1800_net) |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 39 | { |
| 40 | struct bitvec bv; |
| 41 | |
| 42 | memset(&bv, 0, sizeof(bv)); |
| 43 | bv.data = data; |
| 44 | bv.data_len = 1; |
| 45 | |
| 46 | if (nch_pos) { |
| 47 | bitvec_set_bit(&bv, H); |
| 48 | bitvec_set_uint(&bv, *nch_pos, 5); |
| 49 | } else |
| 50 | bitvec_set_bit(&bv, L); |
| 51 | |
| 52 | if (is1800_net) |
| 53 | bitvec_set_bit(&bv, L); |
| 54 | else |
| 55 | bitvec_set_bit(&bv, H); |
| 56 | |
| 57 | bitvec_spare_padding(&bv, 6); |
| 58 | return bv.data_len; |
| 59 | } |
| 60 | |
| 61 | /* Append Repeated E-UTRAN Neighbour Cell to bitvec: see 3GPP TS 44.018 Table 10.5.2.33b.1 */ |
| 62 | static inline bool append_eutran_neib_cell(struct bitvec *bv, const struct osmo_earfcn_si2q *e, size_t *e_offset, |
| 63 | uint8_t budget) |
| 64 | { |
| 65 | unsigned i, skip = 0; |
| 66 | int16_t rem = budget - 6; /* account for mandatory stop bit and THRESH_E-UTRAN_high */ |
| 67 | uint8_t earfcn_budget; |
| 68 | |
| 69 | if (budget <= 6) |
| 70 | return false; |
| 71 | |
| 72 | OSMO_ASSERT(budget <= SI2Q_MAX_LEN); |
| 73 | |
| 74 | /* first we have to properly adjust budget requirements */ |
| 75 | if (e->prio_valid) /* E-UTRAN_PRIORITY: 3GPP TS 45.008*/ |
| 76 | rem -= 4; |
| 77 | else |
| 78 | rem--; |
| 79 | |
| 80 | if (e->thresh_lo_valid) /* THRESH_E-UTRAN_low: */ |
| 81 | rem -= 6; |
| 82 | else |
| 83 | rem--; |
| 84 | |
| 85 | if (e->qrxlm_valid) /* E-UTRAN_QRXLEVMIN: */ |
| 86 | rem -= 6; |
| 87 | else |
| 88 | rem--; |
| 89 | |
| 90 | if (rem < 0) |
| 91 | return false; |
| 92 | |
| 93 | /* now we can proceed with actually adding EARFCNs within adjusted budget limit */ |
| 94 | for (i = 0; i < e->length; i++) { |
| 95 | if (e->arfcn[i] != OSMO_EARFCN_INVALID) { |
| 96 | if (skip < *e_offset) { |
| 97 | skip++; /* ignore EARFCNs added on previous calls */ |
| 98 | } else { |
| 99 | earfcn_budget = 17; /* compute budget per-EARFCN */ |
| 100 | if (OSMO_EARFCN_MEAS_INVALID == e->meas_bw[i]) |
| 101 | earfcn_budget++; |
| 102 | else |
| 103 | earfcn_budget += 4; |
| 104 | |
| 105 | if (rem - earfcn_budget < 0) |
| 106 | break; |
| 107 | else { |
| 108 | (*e_offset)++; |
| 109 | rem -= earfcn_budget; |
| 110 | |
| 111 | if (rem < 0) |
| 112 | return false; |
| 113 | |
| 114 | bitvec_set_bit(bv, 1); /* EARFCN: */ |
| 115 | bitvec_set_uint(bv, e->arfcn[i], 16); |
| 116 | |
| 117 | if (OSMO_EARFCN_MEAS_INVALID == e->meas_bw[i]) |
| 118 | bitvec_set_bit(bv, 0); |
| 119 | else { /* Measurement Bandwidth: 9.1.54 */ |
| 120 | bitvec_set_bit(bv, 1); |
| 121 | bitvec_set_uint(bv, e->meas_bw[i], 3); |
| 122 | } |
| 123 | } |
| 124 | } |
| 125 | } |
| 126 | } |
| 127 | |
| 128 | /* stop bit - end of EARFCN + Measurement Bandwidth sequence */ |
| 129 | bitvec_set_bit(bv, 0); |
| 130 | |
| 131 | /* Note: we don't support different EARFCN arrays each with different priority, threshold etc. */ |
| 132 | |
| 133 | if (e->prio_valid) { |
| 134 | /* E-UTRAN_PRIORITY: 3GPP TS 45.008*/ |
| 135 | bitvec_set_bit(bv, 1); |
| 136 | bitvec_set_uint(bv, e->prio, 3); |
| 137 | } else |
| 138 | bitvec_set_bit(bv, 0); |
| 139 | |
| 140 | /* THRESH_E-UTRAN_high */ |
| 141 | bitvec_set_uint(bv, e->thresh_hi, 5); |
| 142 | |
| 143 | if (e->thresh_lo_valid) { |
| 144 | /* THRESH_E-UTRAN_low: */ |
| 145 | bitvec_set_bit(bv, 1); |
| 146 | bitvec_set_uint(bv, e->thresh_lo, 5); |
| 147 | } else |
| 148 | bitvec_set_bit(bv, 0); |
| 149 | |
| 150 | if (e->qrxlm_valid) { |
| 151 | /* E-UTRAN_QRXLEVMIN: */ |
| 152 | bitvec_set_bit(bv, 1); |
| 153 | bitvec_set_uint(bv, e->qrxlm, 5); |
| 154 | } else |
| 155 | bitvec_set_bit(bv, 0); |
| 156 | |
| 157 | return true; |
| 158 | } |
| 159 | |
| 160 | static inline void append_earfcn(struct bitvec *bv, const struct osmo_earfcn_si2q *e, size_t *e_offset, uint8_t budget) |
| 161 | { |
| 162 | bool appended; |
| 163 | unsigned int old = bv->cur_bit; /* save current position to make rollback possible */ |
| 164 | int rem = budget - 25; |
| 165 | if (rem <= 0) |
| 166 | return; |
| 167 | |
| 168 | OSMO_ASSERT(budget <= SI2Q_MAX_LEN); |
| 169 | |
| 170 | /* Additions in Rel-5: */ |
| 171 | bitvec_set_bit(bv, H); |
| 172 | /* No 3G Additional Measurement Param. Descr. */ |
| 173 | bitvec_set_bit(bv, 0); |
| 174 | /* No 3G ADDITIONAL MEASUREMENT Param. Descr. 2 */ |
| 175 | bitvec_set_bit(bv, 0); |
| 176 | /* Additions in Rel-6: */ |
| 177 | bitvec_set_bit(bv, H); |
| 178 | /* 3G_CCN_ACTIVE */ |
| 179 | bitvec_set_bit(bv, 0); |
| 180 | /* Additions in Rel-7: */ |
| 181 | bitvec_set_bit(bv, H); |
| 182 | /* No 700_REPORTING_OFFSET */ |
| 183 | bitvec_set_bit(bv, 0); |
| 184 | /* No 810_REPORTING_OFFSET */ |
| 185 | bitvec_set_bit(bv, 0); |
| 186 | /* Additions in Rel-8: */ |
| 187 | bitvec_set_bit(bv, H); |
| 188 | |
| 189 | /* Priority and E-UTRAN Parameters Description */ |
| 190 | bitvec_set_bit(bv, 1); |
| 191 | |
| 192 | /* No Serving Cell Priority Parameters Descr. */ |
| 193 | bitvec_set_bit(bv, 0); |
| 194 | /* No 3G Priority Parameters Description */ |
| 195 | bitvec_set_bit(bv, 0); |
| 196 | /* E-UTRAN Parameters Description */ |
| 197 | bitvec_set_bit(bv, 1); |
| 198 | |
| 199 | /* E-UTRAN_CCN_ACTIVE */ |
| 200 | bitvec_set_bit(bv, 0); |
| 201 | /* E-UTRAN_Start: 9.1.54 */ |
| 202 | bitvec_set_bit(bv, 1); |
| 203 | /* E-UTRAN_Stop: 9.1.54 */ |
| 204 | bitvec_set_bit(bv, 1); |
| 205 | |
| 206 | /* No E-UTRAN Measurement Parameters Descr. */ |
| 207 | bitvec_set_bit(bv, 0); |
| 208 | /* No GPRS E-UTRAN Measurement Param. Descr. */ |
| 209 | bitvec_set_bit(bv, 0); |
| 210 | |
| 211 | /* Note: each of next 3 "repeated" structures might be repeated any |
| 212 | (0, 1, 2...) times - we only support 1 and 0 */ |
| 213 | |
| 214 | /* Repeated E-UTRAN Neighbour Cells */ |
| 215 | bitvec_set_bit(bv, 1); |
| 216 | |
| 217 | appended = append_eutran_neib_cell(bv, e, e_offset, rem); |
| 218 | if (!appended) { /* appending is impossible within current budget: rollback */ |
| 219 | bv->cur_bit = old; |
| 220 | return; |
| 221 | } |
| 222 | |
| 223 | /* stop bit - end of Repeated E-UTRAN Neighbour Cells sequence: */ |
| 224 | bitvec_set_bit(bv, 0); |
| 225 | |
| 226 | /* Note: following 2 repeated structs are not supported ATM */ |
| 227 | /* stop bit - end of Repeated E-UTRAN Not Allowed Cells sequence: */ |
| 228 | bitvec_set_bit(bv, 0); |
| 229 | /* stop bit - end of Repeated E-UTRAN PCID to TA mapping sequence: */ |
| 230 | bitvec_set_bit(bv, 0); |
| 231 | |
| 232 | /* Priority and E-UTRAN Parameters Description ends here */ |
| 233 | /* No 3G CSG Description */ |
| 234 | bitvec_set_bit(bv, 0); |
| 235 | /* No E-UTRAN CSG Description */ |
| 236 | bitvec_set_bit(bv, 0); |
| 237 | /* No Additions in Rel-9: */ |
| 238 | bitvec_set_bit(bv, L); |
| 239 | } |
| 240 | |
| 241 | static int range_encode(enum osmo_gsm48_range r, int *arfcns, int arfcns_used, int *w, |
| 242 | int f0, uint8_t *chan_list) |
| 243 | { |
| 244 | /* |
| 245 | * Manipulate the ARFCN list according to the rules in J4 depending |
| 246 | * on the selected range. |
| 247 | */ |
| 248 | int rc, f0_included; |
| 249 | |
| 250 | osmo_gsm48_range_enc_filter_arfcns(arfcns, arfcns_used, f0, &f0_included); |
| 251 | |
| 252 | rc = osmo_gsm48_range_enc_arfcns(r, arfcns, arfcns_used, w, 0); |
| 253 | if (rc < 0) |
| 254 | return rc; |
| 255 | |
| 256 | /* Select the range and the amount of bits needed */ |
| 257 | switch (r) { |
| 258 | case OSMO_GSM48_ARFCN_RANGE_128: |
Harald Welte | 1276c17 | 2019-05-28 18:38:35 +0200 | [diff] [blame] | 259 | return osmo_gsm48_range_enc_128(chan_list, f0, w); |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 260 | case OSMO_GSM48_ARFCN_RANGE_256: |
Harald Welte | 1276c17 | 2019-05-28 18:38:35 +0200 | [diff] [blame] | 261 | return osmo_gsm48_range_enc_256(chan_list, f0, w); |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 262 | case OSMO_GSM48_ARFCN_RANGE_512: |
Harald Welte | 1276c17 | 2019-05-28 18:38:35 +0200 | [diff] [blame] | 263 | return osmo_gsm48_range_enc_512(chan_list, f0, w); |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 264 | case OSMO_GSM48_ARFCN_RANGE_1024: |
Harald Welte | 1276c17 | 2019-05-28 18:38:35 +0200 | [diff] [blame] | 265 | return osmo_gsm48_range_enc_1024(chan_list, f0, f0_included, w); |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 266 | default: |
| 267 | return -ERANGE; |
| 268 | }; |
| 269 | |
| 270 | return f0_included; |
| 271 | } |
| 272 | |
| 273 | static inline int f0_helper(int *sc, size_t length, uint8_t *chan_list) |
| 274 | { |
| 275 | int w[OSMO_GSM48_RANGE_ENC_MAX_ARFCNS] = { 0 }; |
| 276 | |
| 277 | return range_encode(OSMO_GSM48_ARFCN_RANGE_1024, sc, length, w, 0, chan_list); |
| 278 | } |
| 279 | |
| 280 | /* Return p(n) for given NR_OF_TDD_CELLS - see Table 9.1.54.1a, 3GPP TS 44.018 */ |
| 281 | static unsigned range1024_p(unsigned n) |
| 282 | { |
| 283 | switch (n) { |
| 284 | case 0: return 0; |
| 285 | case 1: return 10; |
| 286 | case 2: return 19; |
| 287 | case 3: return 28; |
| 288 | case 4: return 36; |
| 289 | case 5: return 44; |
| 290 | case 6: return 52; |
| 291 | case 7: return 60; |
| 292 | case 8: return 67; |
| 293 | case 9: return 74; |
| 294 | case 10: return 81; |
| 295 | case 11: return 88; |
| 296 | case 12: return 95; |
| 297 | case 13: return 102; |
| 298 | case 14: return 109; |
| 299 | case 15: return 116; |
| 300 | case 16: return 122; |
| 301 | default: return 0; |
| 302 | } |
| 303 | } |
| 304 | |
| 305 | /* Estimate how many bits it'll take to append single FDD UARFCN */ |
| 306 | static inline int append_utran_fdd_length(uint16_t u, const int *sc, size_t sc_len, size_t length) |
| 307 | { |
| 308 | uint8_t chan_list[16] = { 0 }; |
| 309 | int tmp[sc_len], f0; |
| 310 | |
| 311 | memcpy(tmp, sc, sizeof(tmp)); |
| 312 | |
| 313 | f0 = f0_helper(tmp, length, chan_list); |
| 314 | if (f0 < 0) |
| 315 | return f0; |
| 316 | |
| 317 | return 21 + range1024_p(length); |
| 318 | } |
| 319 | |
| 320 | /* Append single FDD UARFCN */ |
| 321 | static inline int append_utran_fdd(struct bitvec *bv, uint16_t u, int *sc, size_t length) |
| 322 | { |
| 323 | uint8_t chan_list[16] = { 0 }; |
| 324 | int f0 = f0_helper(sc, length, chan_list); |
| 325 | |
| 326 | if (f0 < 0) |
| 327 | return f0; |
| 328 | |
| 329 | /* Repeated UTRAN FDD Neighbour Cells */ |
| 330 | bitvec_set_bit(bv, 1); |
| 331 | |
| 332 | /* FDD-ARFCN */ |
| 333 | bitvec_set_bit(bv, 0); |
| 334 | bitvec_set_uint(bv, u, 14); |
| 335 | |
| 336 | /* FDD_Indic0: parameter value '0000000000' is a member of the set? */ |
| 337 | bitvec_set_bit(bv, f0); |
| 338 | /* NR_OF_FDD_CELLS */ |
| 339 | bitvec_set_uint(bv, length, 5); |
| 340 | |
| 341 | f0 = bv->cur_bit; |
| 342 | bitvec_add_range1024(bv, (struct gsm48_range_1024 *)chan_list); |
| 343 | bv->cur_bit = f0 + range1024_p(length); |
| 344 | |
| 345 | return 21 + range1024_p(length); |
| 346 | } |
| 347 | |
| 348 | static inline int try_adding_uarfcn(struct bitvec *bv, uint16_t *scramble_list, |
| 349 | size_t uarfcn_length, size_t *u_offset, |
| 350 | uint16_t uarfcn, uint8_t num_sc, uint8_t start_pos, uint8_t budget) |
| 351 | { |
| 352 | int i, k, rc, a[uarfcn_length]; |
| 353 | |
| 354 | if (budget < 23) |
| 355 | return -ENOMEM; |
| 356 | |
| 357 | /* copy corresponding Scrambling Codes: range encoder make in-place modifications */ |
| 358 | for (i = start_pos, k = 0; i < num_sc; a[k++] = scramble_list[i++]); |
| 359 | |
| 360 | /* estimate bit length requirements */ |
| 361 | rc = append_utran_fdd_length(uarfcn, a, uarfcn_length, k); |
| 362 | if (rc < 0) |
| 363 | return rc; /* range encoder failure */ |
| 364 | |
| 365 | if (budget - rc <= 0) |
| 366 | return -ENOMEM; /* we have ran out of budget in current SI2q */ |
| 367 | |
| 368 | /* compute next offset */ |
| 369 | *u_offset += k; |
| 370 | |
| 371 | return budget - append_utran_fdd(bv, uarfcn, a, k); |
| 372 | } |
| 373 | |
| 374 | /* Append multiple FDD UARFCNs */ |
| 375 | static inline void append_uarfcns(struct bitvec *bv, const uint16_t *uarfcn_list, size_t *u_offset, |
| 376 | size_t uarfcn_length, uint16_t *scramble_list, uint8_t budget) |
| 377 | { |
| 378 | int i, rem = budget - 7, st = *u_offset; /* account for constant bits right away */ |
| 379 | uint16_t cu = uarfcn_list[*u_offset]; /* caller ensures that length is positive */ |
| 380 | |
| 381 | OSMO_ASSERT(budget <= SI2Q_MAX_LEN); |
| 382 | |
| 383 | if (budget <= 7) |
| 384 | return; |
| 385 | |
| 386 | /* 3G Neighbour Cell Description */ |
| 387 | bitvec_set_bit(bv, 1); |
| 388 | /* No Index_Start_3G */ |
| 389 | bitvec_set_bit(bv, 0); |
| 390 | /* No Absolute_Index_Start_EMR */ |
| 391 | bitvec_set_bit(bv, 0); |
| 392 | |
| 393 | /* UTRAN FDD Description */ |
| 394 | bitvec_set_bit(bv, 1); |
| 395 | /* No Bandwidth_FDD */ |
| 396 | bitvec_set_bit(bv, 0); |
| 397 | |
| 398 | for (i = *u_offset; i <= uarfcn_length; i++) |
| 399 | if (uarfcn_list[i] != cu) { /* we've reached new UARFCN */ |
| 400 | rem = try_adding_uarfcn(bv, scramble_list, uarfcn_length, u_offset, cu, i, st, rem); |
| 401 | if (rem < 0) |
| 402 | break; |
| 403 | |
| 404 | if (i < uarfcn_length) { |
| 405 | cu = uarfcn_list[i]; |
| 406 | st = i; |
| 407 | } else |
| 408 | break; |
| 409 | } |
| 410 | |
| 411 | /* stop bit - end of Repeated UTRAN FDD Neighbour Cells */ |
| 412 | bitvec_set_bit(bv, 0); |
| 413 | |
| 414 | /* UTRAN TDD Description */ |
| 415 | bitvec_set_bit(bv, 0); |
| 416 | } |
| 417 | |
| 418 | static size_t si2q_earfcn_count(const struct osmo_earfcn_si2q *e) |
| 419 | { |
| 420 | unsigned i, ret = 0; |
| 421 | |
| 422 | if (!e) |
| 423 | return 0; |
| 424 | |
| 425 | for (i = 0; i < e->length; i++) |
| 426 | if (e->arfcn[i] != OSMO_EARFCN_INVALID) |
| 427 | ret++; |
| 428 | |
| 429 | return ret; |
| 430 | } |
| 431 | |
| 432 | /* generate SI2quater rest octets: 3GPP TS 44.018 § 10.5.2.33b */ |
Harald Welte | 428d03b | 2019-05-28 18:46:20 +0200 | [diff] [blame] | 433 | int osmo_gsm48_rest_octets_si2quater_encode(uint8_t *data, uint8_t si2q_index, uint8_t si2q_count, |
| 434 | const uint16_t *uarfcn_list, size_t *u_offset, |
| 435 | size_t uarfcn_length, uint16_t *scramble_list, |
| 436 | struct osmo_earfcn_si2q *si2quater_neigh_list, |
| 437 | size_t *e_offset) |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 438 | { |
| 439 | int rc; |
| 440 | struct bitvec bv; |
| 441 | |
| 442 | if (si2q_count < si2q_index) |
| 443 | return -EINVAL; |
| 444 | |
| 445 | bv.data = data; |
| 446 | bv.data_len = 20; |
| 447 | bitvec_zero(&bv); |
| 448 | |
| 449 | /* BA_IND: Set to '0' as that's what we use for SI2xxx type, |
| 450 | * whereas '1' is used for SI5xxx type messages. The point here |
| 451 | * is to be able to correlate whether a given MS measurement |
| 452 | * report was using the neighbor cells advertised in SI2 or in |
| 453 | * SI5, as those two could very well be different */ |
| 454 | bitvec_set_bit(&bv, 0); |
| 455 | /* 3G_BA_IND */ |
| 456 | bitvec_set_bit(&bv, 1); |
| 457 | /* MP_CHANGE_MARK */ |
| 458 | bitvec_set_bit(&bv, 0); |
| 459 | |
| 460 | /* SI2quater_INDEX */ |
| 461 | bitvec_set_uint(&bv, si2q_index, 4); |
| 462 | /* SI2quater_COUNT */ |
| 463 | bitvec_set_uint(&bv, si2q_count, 4); |
| 464 | |
| 465 | /* No Measurement_Parameters Description */ |
| 466 | bitvec_set_bit(&bv, 0); |
| 467 | /* No GPRS_Real Time Difference Description */ |
| 468 | bitvec_set_bit(&bv, 0); |
| 469 | /* No GPRS_BSIC Description */ |
| 470 | bitvec_set_bit(&bv, 0); |
| 471 | /* No GPRS_REPORT PRIORITY Description */ |
| 472 | bitvec_set_bit(&bv, 0); |
| 473 | /* No GPRS_MEASUREMENT_Parameters Description */ |
| 474 | bitvec_set_bit(&bv, 0); |
| 475 | /* No NC Measurement Parameters */ |
| 476 | bitvec_set_bit(&bv, 0); |
| 477 | /* No extension (length) */ |
| 478 | bitvec_set_bit(&bv, 0); |
| 479 | |
| 480 | rc = SI2Q_MAX_LEN - (bv.cur_bit + 3); |
| 481 | if (rc > 0 && uarfcn_length - *u_offset > 0) |
| 482 | append_uarfcns(&bv, uarfcn_list, u_offset, uarfcn_length, scramble_list, rc); |
| 483 | else /* No 3G Neighbour Cell Description */ |
| 484 | bitvec_set_bit(&bv, 0); |
| 485 | |
| 486 | /* No 3G Measurement Parameters Description */ |
| 487 | bitvec_set_bit(&bv, 0); |
| 488 | /* No GPRS_3G_MEASUREMENT Parameters Descr. */ |
| 489 | bitvec_set_bit(&bv, 0); |
| 490 | |
| 491 | rc = SI2Q_MAX_LEN - bv.cur_bit; |
| 492 | if (rc > 0 && si2q_earfcn_count(si2quater_neigh_list) - *e_offset > 0) |
| 493 | append_earfcn(&bv, si2quater_neigh_list, e_offset, rc); |
| 494 | else /* No Additions in Rel-5: */ |
| 495 | bitvec_set_bit(&bv, L); |
| 496 | |
| 497 | bitvec_spare_padding(&bv, (bv.data_len * 8) - 1); |
| 498 | return bv.data_len; |
| 499 | } |
| 500 | |
| 501 | /* Append selection parameters to bitvec */ |
| 502 | static void append_selection_params(struct bitvec *bv, |
| 503 | const struct osmo_gsm48_si_selection_params *sp) |
| 504 | { |
| 505 | if (sp->present) { |
| 506 | bitvec_set_bit(bv, H); |
| 507 | bitvec_set_bit(bv, sp->cbq); |
| 508 | bitvec_set_uint(bv, sp->cell_resel_off, 6); |
| 509 | bitvec_set_uint(bv, sp->temp_offs, 3); |
| 510 | bitvec_set_uint(bv, sp->penalty_time, 5); |
| 511 | } else |
| 512 | bitvec_set_bit(bv, L); |
| 513 | } |
| 514 | |
| 515 | /* Append power offset to bitvec */ |
| 516 | static void append_power_offset(struct bitvec *bv, |
| 517 | const struct osmo_gsm48_si_power_offset *po) |
| 518 | { |
| 519 | if (po->present) { |
| 520 | bitvec_set_bit(bv, H); |
| 521 | bitvec_set_uint(bv, po->power_offset, 2); |
| 522 | } else |
| 523 | bitvec_set_bit(bv, L); |
| 524 | } |
| 525 | |
| 526 | /* Append GPRS indicator to bitvec */ |
| 527 | static void append_gprs_ind(struct bitvec *bv, |
| 528 | const struct osmo_gsm48_si3_gprs_ind *gi) |
| 529 | { |
| 530 | if (gi->present) { |
| 531 | bitvec_set_bit(bv, H); |
| 532 | bitvec_set_uint(bv, gi->ra_colour, 3); |
| 533 | /* 0 == SI13 in BCCH Norm, 1 == SI13 sent on BCCH Ext */ |
| 534 | bitvec_set_bit(bv, gi->si13_position); |
| 535 | } else |
| 536 | bitvec_set_bit(bv, L); |
| 537 | } |
| 538 | |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 539 | /* Generate SI3 Rest Octests (Chapter 10.5.2.34 / Table 10.4.72) */ |
Harald Welte | 428d03b | 2019-05-28 18:46:20 +0200 | [diff] [blame] | 540 | int osmo_gsm48_rest_octets_si3_encode(uint8_t *data, const struct osmo_gsm48_si_ro_info *si3) |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 541 | { |
| 542 | struct bitvec bv; |
| 543 | |
| 544 | memset(&bv, 0, sizeof(bv)); |
| 545 | bv.data = data; |
| 546 | bv.data_len = 4; |
| 547 | |
| 548 | /* Optional Selection Parameters */ |
| 549 | append_selection_params(&bv, &si3->selection_params); |
| 550 | |
| 551 | /* Optional Power Offset */ |
| 552 | append_power_offset(&bv, &si3->power_offset); |
| 553 | |
| 554 | /* Do we have a SI2ter on the BCCH? */ |
| 555 | if (si3->si2ter_indicator) |
| 556 | bitvec_set_bit(&bv, H); |
| 557 | else |
| 558 | bitvec_set_bit(&bv, L); |
| 559 | |
| 560 | /* Early Classmark Sending Control */ |
| 561 | if (si3->early_cm_ctrl) |
| 562 | bitvec_set_bit(&bv, H); |
| 563 | else |
| 564 | bitvec_set_bit(&bv, L); |
| 565 | |
| 566 | /* Do we have a SI Type 9 on the BCCH? */ |
| 567 | if (si3->scheduling.present) { |
| 568 | bitvec_set_bit(&bv, H); |
| 569 | bitvec_set_uint(&bv, si3->scheduling.where, 3); |
| 570 | } else |
| 571 | bitvec_set_bit(&bv, L); |
| 572 | |
| 573 | /* GPRS Indicator */ |
| 574 | append_gprs_ind(&bv, &si3->gprs_ind); |
| 575 | |
| 576 | /* 3G Early Classmark Sending Restriction. If H, then controlled by |
| 577 | * early_cm_ctrl above */ |
| 578 | if (si3->early_cm_restrict_3g) |
| 579 | bitvec_set_bit(&bv, L); |
| 580 | else |
| 581 | bitvec_set_bit(&bv, H); |
| 582 | |
| 583 | if (si3->si2quater_indicator) { |
| 584 | bitvec_set_bit(&bv, H); /* indicator struct present */ |
| 585 | bitvec_set_uint(&bv, 0, 1); /* message is sent on BCCH Norm */ |
| 586 | } |
| 587 | |
| 588 | bitvec_spare_padding(&bv, (bv.data_len*8)-1); |
| 589 | return bv.data_len; |
| 590 | } |
| 591 | |
| 592 | static int append_lsa_params(struct bitvec *bv, |
| 593 | const struct osmo_gsm48_lsa_params *lsa_params) |
| 594 | { |
| 595 | /* FIXME */ |
| 596 | return -1; |
| 597 | } |
| 598 | |
| 599 | /* Generate SI4 Rest Octets (Chapter 10.5.2.35) */ |
Harald Welte | 428d03b | 2019-05-28 18:46:20 +0200 | [diff] [blame] | 600 | int osmo_gsm48_rest_octets_si4_encode(uint8_t *data, const struct osmo_gsm48_si_ro_info *si4, int len) |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 601 | { |
| 602 | struct bitvec bv; |
| 603 | |
| 604 | memset(&bv, 0, sizeof(bv)); |
| 605 | bv.data = data; |
| 606 | bv.data_len = len; |
| 607 | |
| 608 | /* SI4 Rest Octets O */ |
| 609 | append_selection_params(&bv, &si4->selection_params); |
| 610 | append_power_offset(&bv, &si4->power_offset); |
| 611 | append_gprs_ind(&bv, &si4->gprs_ind); |
| 612 | |
| 613 | if (0 /* FIXME */) { |
| 614 | /* H and SI4 Rest Octets S */ |
| 615 | bitvec_set_bit(&bv, H); |
| 616 | |
| 617 | /* LSA Parameters */ |
| 618 | if (si4->lsa_params.present) { |
| 619 | bitvec_set_bit(&bv, H); |
| 620 | append_lsa_params(&bv, &si4->lsa_params); |
| 621 | } else |
| 622 | bitvec_set_bit(&bv, L); |
| 623 | |
| 624 | /* Cell Identity */ |
| 625 | if (1) { |
| 626 | bitvec_set_bit(&bv, H); |
| 627 | bitvec_set_uint(&bv, si4->cell_id, 16); |
| 628 | } else |
| 629 | bitvec_set_bit(&bv, L); |
| 630 | |
| 631 | /* LSA ID Information */ |
| 632 | if (0) { |
| 633 | bitvec_set_bit(&bv, H); |
| 634 | /* FIXME */ |
| 635 | } else |
| 636 | bitvec_set_bit(&bv, L); |
| 637 | } else { |
| 638 | /* L and break indicator */ |
| 639 | bitvec_set_bit(&bv, L); |
| 640 | bitvec_set_bit(&bv, si4->break_ind ? H : L); |
| 641 | } |
| 642 | |
| 643 | return bv.data_len; |
| 644 | } |
| 645 | |
| 646 | |
| 647 | /* GSM 04.18 ETSI TS 101 503 V8.27.0 (2006-05) |
| 648 | |
| 649 | <SI6 rest octets> ::= |
| 650 | {L | H <PCH and NCH info>} |
| 651 | {L | H <VBS/VGCS options : bit(2)>} |
| 652 | { < DTM_support : bit == L > I < DTM_support : bit == H > |
| 653 | < RAC : bit (8) > |
| 654 | < MAX_LAPDm : bit (3) > } |
| 655 | < Band indicator > |
| 656 | { L | H < GPRS_MS_TXPWR_MAX_CCH : bit (5) > } |
| 657 | <implicit spare >; |
| 658 | */ |
Harald Welte | 86156de | 2019-05-28 19:49:47 +0200 | [diff] [blame] | 659 | int osmo_gsm48_rest_octets_si6_encode(uint8_t *data, const struct osmo_gsm48_si6_ro_info *in) |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 660 | { |
| 661 | struct bitvec bv; |
| 662 | |
| 663 | memset(&bv, 0, sizeof(bv)); |
| 664 | bv.data = data; |
| 665 | bv.data_len = 1; |
| 666 | |
Harald Welte | 86156de | 2019-05-28 19:49:47 +0200 | [diff] [blame] | 667 | if (in->pch_nch_info.present) { |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 668 | bitvec_set_bit(&bv, H); |
Harald Welte | 86156de | 2019-05-28 19:49:47 +0200 | [diff] [blame] | 669 | bitvec_set_bit(&bv, !!in->pch_nch_info.paging_channel_restructuring); |
| 670 | bitvec_set_uint(&bv, in->pch_nch_info.nln_sacch, 2); |
| 671 | if (in->pch_nch_info.call_priority_present) { |
| 672 | bitvec_set_bit(&bv, 1); |
| 673 | bitvec_set_uint(&bv, in->pch_nch_info.call_priority, 3); |
| 674 | } else |
| 675 | bitvec_set_bit(&bv, 0); |
| 676 | bitvec_set_bit(&bv, !!in->pch_nch_info.nln_status_sacch); |
| 677 | } else |
| 678 | bitvec_set_bit(&bv, L); |
| 679 | |
| 680 | if (in->vbs_vgcs_options.present) { |
| 681 | bitvec_set_bit(&bv, H); |
| 682 | bitvec_set_bit(&bv, !!in->vbs_vgcs_options.inband_notifications); |
| 683 | bitvec_set_bit(&bv, !!in->vbs_vgcs_options.inband_pagings); |
| 684 | } else |
| 685 | bitvec_set_bit(&bv, L); |
| 686 | |
| 687 | if (in->dtm_support.present) { |
| 688 | bitvec_set_bit(&bv, H); |
| 689 | bitvec_set_uint(&bv, in->dtm_support.rac, 8); |
| 690 | bitvec_set_uint(&bv, in->dtm_support.max_lapdm, 3); |
| 691 | } else |
| 692 | bitvec_set_bit(&bv, L); |
| 693 | |
| 694 | if (in->band_indicator_1900) |
| 695 | bitvec_set_bit(&bv, H); |
| 696 | else |
| 697 | bitvec_set_bit(&bv, L); |
| 698 | |
| 699 | if (in->gprs_ms_txpwr_max_ccch.present) { |
| 700 | bitvec_set_bit(&bv, H); |
| 701 | bitvec_set_uint(&bv, in->gprs_ms_txpwr_max_ccch.max_txpwr, 5); |
| 702 | } else |
| 703 | bitvec_set_bit(&bv, L); |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 704 | |
| 705 | bitvec_spare_padding(&bv, (bv.data_len * 8) - 1); |
| 706 | return bv.data_len; |
| 707 | } |
| 708 | |
| 709 | /* GPRS Mobile Allocation as per TS 04.60 Chapter 12.10a: |
| 710 | < GPRS Mobile Allocation IE > ::= |
| 711 | < HSN : bit (6) > |
| 712 | { 0 | 1 < RFL number list : < RFL number list struct > > } |
| 713 | { 0 < MA_LENGTH : bit (6) > |
| 714 | < MA_BITMAP: bit (val(MA_LENGTH) + 1) > |
| 715 | | 1 { 0 | 1 <ARFCN index list : < ARFCN index list struct > > } } ; |
| 716 | |
| 717 | < RFL number list struct > :: = |
| 718 | < RFL_NUMBER : bit (4) > |
| 719 | { 0 | 1 < RFL number list struct > } ; |
| 720 | < ARFCN index list struct > ::= |
| 721 | < ARFCN_INDEX : bit(6) > |
| 722 | { 0 | 1 < ARFCN index list struct > } ; |
| 723 | */ |
| 724 | static int append_gprs_mobile_alloc(struct bitvec *bv) |
| 725 | { |
| 726 | /* Hopping Sequence Number */ |
| 727 | bitvec_set_uint(bv, 0, 6); |
| 728 | |
| 729 | if (0) { |
| 730 | /* We want to use a RFL number list */ |
| 731 | bitvec_set_bit(bv, 1); |
| 732 | /* FIXME: RFL number list */ |
| 733 | } else |
| 734 | bitvec_set_bit(bv, 0); |
| 735 | |
| 736 | if (0) { |
| 737 | /* We want to use a MA_BITMAP */ |
| 738 | bitvec_set_bit(bv, 0); |
| 739 | /* FIXME: MA_LENGTH, MA_BITMAP, ... */ |
| 740 | } else { |
| 741 | bitvec_set_bit(bv, 1); |
| 742 | if (0) { |
| 743 | /* We want to provide an ARFCN index list */ |
| 744 | bitvec_set_bit(bv, 1); |
| 745 | /* FIXME */ |
| 746 | } else |
| 747 | bitvec_set_bit(bv, 0); |
| 748 | } |
| 749 | return 0; |
| 750 | } |
| 751 | |
| 752 | static int encode_t3192(unsigned int t3192) |
| 753 | { |
| 754 | /* See also 3GPP TS 44.060 |
| 755 | Table 12.24.2: GPRS Cell Options information element details */ |
| 756 | if (t3192 == 0) |
| 757 | return 3; |
| 758 | else if (t3192 <= 80) |
| 759 | return 4; |
| 760 | else if (t3192 <= 120) |
| 761 | return 5; |
| 762 | else if (t3192 <= 160) |
| 763 | return 6; |
| 764 | else if (t3192 <= 200) |
| 765 | return 7; |
| 766 | else if (t3192 <= 500) |
| 767 | return 0; |
| 768 | else if (t3192 <= 1000) |
| 769 | return 1; |
| 770 | else if (t3192 <= 1500) |
| 771 | return 2; |
| 772 | else |
| 773 | return -EINVAL; |
| 774 | } |
| 775 | |
| 776 | static int encode_drx_timer(unsigned int drx) |
| 777 | { |
| 778 | if (drx == 0) |
| 779 | return 0; |
| 780 | else if (drx == 1) |
| 781 | return 1; |
| 782 | else if (drx == 2) |
| 783 | return 2; |
| 784 | else if (drx <= 4) |
| 785 | return 3; |
| 786 | else if (drx <= 8) |
| 787 | return 4; |
| 788 | else if (drx <= 16) |
| 789 | return 5; |
| 790 | else if (drx <= 32) |
| 791 | return 6; |
| 792 | else if (drx <= 64) |
| 793 | return 7; |
| 794 | else |
| 795 | return -EINVAL; |
| 796 | } |
| 797 | |
| 798 | /* GPRS Cell Options as per TS 04.60 Chapter 12.24 |
| 799 | < GPRS Cell Options IE > ::= |
| 800 | < NMO : bit(2) > |
| 801 | < T3168 : bit(3) > |
| 802 | < T3192 : bit(3) > |
| 803 | < DRX_TIMER_MAX: bit(3) > |
| 804 | < ACCESS_BURST_TYPE: bit > |
| 805 | < CONTROL_ACK_TYPE : bit > |
| 806 | < BS_CV_MAX: bit(4) > |
| 807 | { 0 | 1 < PAN_DEC : bit(3) > |
| 808 | < PAN_INC : bit(3) > |
| 809 | < PAN_MAX : bit(3) > |
| 810 | { 0 | 1 < Extension Length : bit(6) > |
| 811 | < bit (val(Extension Length) + 1 |
| 812 | & { < Extension Information > ! { bit ** = <no string> } } ; |
| 813 | < Extension Information > ::= |
| 814 | { 0 | 1 < EGPRS_PACKET_CHANNEL_REQUEST : bit > |
| 815 | < BEP_PERIOD : bit(4) > } |
| 816 | < PFC_FEATURE_MODE : bit > |
| 817 | < DTM_SUPPORT : bit > |
| 818 | <BSS_PAGING_COORDINATION: bit > |
| 819 | <spare bit > ** ; |
| 820 | */ |
| 821 | static int append_gprs_cell_opt(struct bitvec *bv, |
| 822 | const struct osmo_gprs_cell_options *gco) |
| 823 | { |
| 824 | int t3192, drx_timer_max; |
| 825 | |
| 826 | t3192 = encode_t3192(gco->t3192); |
| 827 | if (t3192 < 0) |
| 828 | return t3192; |
| 829 | |
| 830 | drx_timer_max = encode_drx_timer(gco->drx_timer_max); |
| 831 | if (drx_timer_max < 0) |
| 832 | return drx_timer_max; |
| 833 | |
| 834 | bitvec_set_uint(bv, gco->nmo, 2); |
| 835 | |
| 836 | /* See also 3GPP TS 44.060 |
| 837 | Table 12.24.2: GPRS Cell Options information element details */ |
| 838 | bitvec_set_uint(bv, gco->t3168 / 500 - 1, 3); |
| 839 | |
| 840 | bitvec_set_uint(bv, t3192, 3); |
| 841 | bitvec_set_uint(bv, drx_timer_max, 3); |
| 842 | /* ACCESS_BURST_TYPE: Hard-code 8bit */ |
| 843 | bitvec_set_bit(bv, 0); |
| 844 | /* CONTROL_ACK_TYPE: */ |
| 845 | bitvec_set_bit(bv, gco->ctrl_ack_type_use_block); |
| 846 | bitvec_set_uint(bv, gco->bs_cv_max, 4); |
| 847 | |
| 848 | if (0) { |
| 849 | /* hard-code no PAN_{DEC,INC,MAX} */ |
| 850 | bitvec_set_bit(bv, 0); |
| 851 | } else { |
| 852 | /* copied from ip.access BSC protocol trace */ |
| 853 | bitvec_set_bit(bv, 1); |
| 854 | bitvec_set_uint(bv, 1, 3); /* DEC */ |
| 855 | bitvec_set_uint(bv, 1, 3); /* INC */ |
| 856 | bitvec_set_uint(bv, 15, 3); /* MAX */ |
| 857 | } |
| 858 | |
| 859 | if (!gco->ext_info_present) { |
| 860 | /* no extension information */ |
| 861 | bitvec_set_bit(bv, 0); |
| 862 | } else { |
| 863 | /* extension information */ |
| 864 | bitvec_set_bit(bv, 1); |
| 865 | if (!gco->ext_info.egprs_supported) { |
| 866 | /* 6bit length of extension */ |
| 867 | bitvec_set_uint(bv, (1 + 3)-1, 6); |
| 868 | /* EGPRS supported in the cell */ |
| 869 | bitvec_set_bit(bv, 0); |
| 870 | } else { |
| 871 | /* 6bit length of extension */ |
| 872 | bitvec_set_uint(bv, (1 + 5 + 3)-1, 6); |
| 873 | /* EGPRS supported in the cell */ |
| 874 | bitvec_set_bit(bv, 1); |
| 875 | |
| 876 | /* 1bit EGPRS PACKET CHANNEL REQUEST */ |
| 877 | if (gco->supports_egprs_11bit_rach == 0) { |
| 878 | bitvec_set_bit(bv, |
| 879 | gco->ext_info.use_egprs_p_ch_req); |
| 880 | } else { |
| 881 | bitvec_set_bit(bv, 0); |
| 882 | } |
| 883 | |
| 884 | /* 4bit BEP PERIOD */ |
| 885 | bitvec_set_uint(bv, gco->ext_info.bep_period, 4); |
| 886 | } |
| 887 | bitvec_set_bit(bv, gco->ext_info.pfc_supported); |
| 888 | bitvec_set_bit(bv, gco->ext_info.dtm_supported); |
| 889 | bitvec_set_bit(bv, gco->ext_info.bss_paging_coordination); |
| 890 | } |
| 891 | |
| 892 | return 0; |
| 893 | } |
| 894 | |
| 895 | static void append_gprs_pwr_ctrl_pars(struct bitvec *bv, |
| 896 | const struct osmo_gprs_power_ctrl_pars *pcp) |
| 897 | { |
| 898 | bitvec_set_uint(bv, pcp->alpha, 4); |
| 899 | bitvec_set_uint(bv, pcp->t_avg_w, 5); |
| 900 | bitvec_set_uint(bv, pcp->t_avg_t, 5); |
| 901 | bitvec_set_uint(bv, pcp->pc_meas_chan, 1); |
| 902 | bitvec_set_uint(bv, pcp->n_avg_i, 4); |
| 903 | } |
| 904 | |
| 905 | /* Generate SI13 Rest Octests (04.08 Chapter 10.5.2.37b) */ |
Harald Welte | 428d03b | 2019-05-28 18:46:20 +0200 | [diff] [blame] | 906 | int osmo_gsm48_rest_octets_si13_encode(uint8_t *data, const struct osmo_gsm48_si13_info *si13) |
Stefan Sperling | bd6e7a9 | 2018-07-27 15:17:09 +0200 | [diff] [blame] | 907 | { |
| 908 | struct bitvec bv; |
| 909 | |
| 910 | memset(&bv, 0, sizeof(bv)); |
| 911 | bv.data = data; |
| 912 | bv.data_len = 20; |
| 913 | |
| 914 | if (0) { |
| 915 | /* No rest octets */ |
| 916 | bitvec_set_bit(&bv, L); |
| 917 | } else { |
| 918 | bitvec_set_bit(&bv, H); |
| 919 | bitvec_set_uint(&bv, si13->bcch_change_mark, 3); |
| 920 | bitvec_set_uint(&bv, si13->si_change_field, 4); |
| 921 | if (1) { |
| 922 | bitvec_set_bit(&bv, 0); |
| 923 | } else { |
| 924 | bitvec_set_bit(&bv, 1); |
| 925 | bitvec_set_uint(&bv, si13->bcch_change_mark, 2); |
| 926 | append_gprs_mobile_alloc(&bv); |
| 927 | } |
| 928 | /* PBCCH not present in cell: |
| 929 | it shall never be indicated according to 3GPP TS 44.018 Table 10.5.2.37b.1 */ |
| 930 | bitvec_set_bit(&bv, 0); |
| 931 | bitvec_set_uint(&bv, si13->rac, 8); |
| 932 | bitvec_set_bit(&bv, si13->spgc_ccch_sup); |
| 933 | bitvec_set_uint(&bv, si13->prio_acc_thr, 3); |
| 934 | bitvec_set_uint(&bv, si13->net_ctrl_ord, 2); |
| 935 | append_gprs_cell_opt(&bv, &si13->cell_opts); |
| 936 | append_gprs_pwr_ctrl_pars(&bv, &si13->pwr_ctrl_pars); |
| 937 | |
| 938 | /* 3GPP TS 44.018 Release 6 / 10.5.2.37b */ |
| 939 | bitvec_set_bit(&bv, H); /* added Release 99 */ |
| 940 | /* claim our SGSN is compatible with Release 99, as EDGE and EGPRS |
| 941 | * was only added in this Release */ |
| 942 | bitvec_set_bit(&bv, 1); |
| 943 | } |
| 944 | bitvec_spare_padding(&bv, (bv.data_len*8)-1); |
| 945 | return bv.data_len; |
| 946 | } |
Harald Welte | f85b33f | 2019-05-28 17:56:21 +0200 | [diff] [blame] | 947 | |
| 948 | |
| 949 | /*********************************************************************** |
| 950 | * Decoder |
| 951 | ***********************************************************************/ |
| 952 | |
| 953 | /*! Decode SI3 Rest Octests (Chapter 10.5.2.34 / Table 10.4.72). |
| 954 | * \param[out] si3 decoded SI3 rest octets |
| 955 | * \param[in] encoded SI3 rest octets, 4 octets long */ |
| 956 | void osmo_gsm48_rest_octets_si3_decode(struct osmo_gsm48_si_ro_info *si3, const uint8_t *data) |
| 957 | { |
| 958 | struct osmo_gsm48_si_selection_params *sp = &si3->selection_params; |
| 959 | struct osmo_gsm48_si_power_offset *po = &si3->power_offset; |
| 960 | struct osmo_gsm48_si3_gprs_ind *gi = &si3->gprs_ind; |
| 961 | struct bitvec bv; |
| 962 | |
| 963 | memset(&bv, 0, sizeof(bv)); |
| 964 | bv.data = (uint8_t *) data; |
| 965 | bv.data_len = 4; |
| 966 | |
| 967 | memset(si3, 0, sizeof(*si3)); |
| 968 | |
| 969 | /* Optional Selection Paraosmo_gsm48_si_ro_infometers */ |
| 970 | if (bitvec_get_bit_high(&bv) == H) { |
| 971 | sp->present = 1; |
| 972 | sp->cbq = bitvec_get_uint(&bv, 1); |
| 973 | sp->cell_resel_off = bitvec_get_uint(&bv, 6); |
| 974 | sp->temp_offs = bitvec_get_uint(&bv, 3); |
| 975 | sp->penalty_time = bitvec_get_uint(&bv, 5); |
| 976 | } else |
| 977 | sp->present = 0; |
| 978 | |
| 979 | /* Optional Power Offset */ |
| 980 | if (bitvec_get_bit_high(&bv) == H) { |
| 981 | po->present = 1; |
| 982 | po->power_offset = bitvec_get_uint(&bv, 2); |
| 983 | } else |
| 984 | po->present = 0; |
| 985 | |
| 986 | /* System Information 2ter Indicator */ |
| 987 | if (bitvec_get_bit_high(&bv) == H) |
| 988 | si3->si2ter_indicator = 1; |
| 989 | else |
| 990 | si3->si2ter_indicator = 0; |
| 991 | |
| 992 | /* Early Classmark Sending Control */ |
| 993 | if (bitvec_get_bit_high(&bv) == H) |
| 994 | si3->early_cm_ctrl = 1; |
| 995 | else |
| 996 | si3->early_cm_ctrl = 0; |
| 997 | |
| 998 | /* Scheduling if and where */ |
| 999 | if (bitvec_get_bit_high(&bv) == H) { |
| 1000 | si3->scheduling.present = 1; |
| 1001 | si3->scheduling.where = bitvec_get_uint(&bv, 3); |
| 1002 | } else |
| 1003 | si3->scheduling.present = 0; |
| 1004 | |
| 1005 | /* GPRS Indicator */ |
| 1006 | if (bitvec_get_bit_high(&bv) == H) { |
| 1007 | gi->present = 1; |
| 1008 | gi->ra_colour = bitvec_get_uint(&bv, 3); |
| 1009 | gi->si13_position = bitvec_get_uint(&bv, 1); |
| 1010 | } else |
| 1011 | gi->present = 0; |
| 1012 | |
| 1013 | /* 3G Early Classmark Sending Restriction. If H, then controlled by |
| 1014 | * early_cm_ctrl above */ |
| 1015 | if (bitvec_get_bit_high(&bv) == H) |
| 1016 | si3->early_cm_restrict_3g = 1; |
| 1017 | else |
| 1018 | si3->early_cm_restrict_3g = 0; |
| 1019 | |
| 1020 | if (bitvec_get_bit_high(&bv) == H) |
| 1021 | si3->si2quater_indicator = 1; |
| 1022 | else |
| 1023 | si3->si2quater_indicator = 0; |
| 1024 | } |