tests/stats: add VTY transcript tests
Change-Id: I85ac73f4c866617179e55821a292aad33b6edc99
Related: SYS#5713
diff --git a/tests/Makefile.am b/tests/Makefile.am
index 0880561..b72619f 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -73,6 +73,7 @@
if !EMBEDDED
check_PROGRAMS += \
stats/stats_test \
+ stats/stats_vty_test \
exec/exec_test
endif
@@ -89,6 +90,9 @@
stats_stats_test_LDADD = $(LDADD) $(top_builddir)/src/gsm/libosmogsm.la
stats_stats_test_CPPFLAGS = $(AM_CPPFLAGS) -I$(top_srcdir)/src
+stats_stats_vty_test_SOURCES = stats/stats_vty_test.c
+stats_stats_vty_test_LDADD = $(LDADD) $(top_builddir)/src/vty/libosmovty.la
+
a5_a5_test_SOURCES = a5/a5_test.c
a5_a5_test_LDADD = $(LDADD) $(top_builddir)/src/gsm/libgsmint.la
@@ -374,6 +378,7 @@
comp128/comp128_test.ok bits/bitfield_test.ok \
utils/utils_test.ok utils/utils_test.err \
stats/stats_test.ok stats/stats_test.err \
+ stats/stats_vty_test.vty \
bitvec/bitvec_test.ok msgb/msgb_test.ok bits/bitcomp_test.ok \
sim/sim_test.ok tlv/tlv_test.ok abis/abis_test.ok \
gsup/gsup_test.ok gsup/gsup_test.err \
@@ -677,12 +682,19 @@
-r "$(top_builddir)/tests/tdef/tdef_vty_test_dynamic" \
$(U) $(srcdir)/tdef/tdef_vty_test_dynamic.vty
+vty-test-stats:
+ osmo_verify_transcript_vty.py -v \
+ -p 42042 \
+ -r "$(top_builddir)/tests/stats/stats_vty_test" \
+ $(U) $(srcdir)/stats/*.vty
+
# don't run vty tests concurrently so that the ports don't conflict
vty-test:
$(MAKE) vty-test-logging
$(MAKE) vty-test-vty
$(MAKE) vty-test-tdef
$(MAKE) vty-test-ns2
+ $(MAKE) vty-test-stats
ctrl-test:
echo "No CTRL tests exist currently"
diff --git a/tests/stats/stats_vty_test.c b/tests/stats/stats_vty_test.c
new file mode 100644
index 0000000..09b125a
--- /dev/null
+++ b/tests/stats/stats_vty_test.c
@@ -0,0 +1,88 @@
+/*
+ * (C) 2021 by sysmocom s.f.m.c. GmbH <info@sysmocom.de>
+ *
+ * All Rights Reserved
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdio.h>
+#include <signal.h>
+
+#include <osmocom/core/application.h>
+#include <osmocom/core/logging.h>
+#include <osmocom/core/select.h>
+#include <osmocom/core/utils.h>
+
+#include <osmocom/vty/telnet_interface.h>
+#include <osmocom/vty/stats.h>
+#include <osmocom/vty/vty.h>
+
+static void *root_ctx = NULL;
+static int quit = 0;
+
+static void signal_handler(int signal)
+{
+ fprintf(stdout, "signal %u received\n", signal);
+
+ switch (signal) {
+ case SIGINT:
+ case SIGTERM:
+ quit++;
+ break;
+ }
+}
+
+static struct vty_app_info vty_info = {
+ .name = "stats_vty_test",
+};
+
+static const struct log_info_cat default_categories[] = { };
+
+const struct log_info log_info = {
+ .cat = default_categories,
+ .num_cat = ARRAY_SIZE(default_categories),
+};
+
+int main(int argc, char **argv)
+{
+ int rc;
+
+ root_ctx = talloc_named_const(NULL, 0, "stats_vty_test");
+
+ osmo_init_logging2(root_ctx, &log_info);
+
+ vty_info.tall_ctx = root_ctx;
+ vty_init(&vty_info);
+
+ osmo_stats_vty_add_cmds();
+
+ rc = telnet_init_dynif(root_ctx, NULL, vty_get_bind_addr(), 42042);
+ if (rc < 0)
+ return 2;
+
+ signal(SIGINT, &signal_handler);
+ signal(SIGTERM, &signal_handler);
+ osmo_init_ignore_signals();
+
+ while (!quit)
+ osmo_select_main(0);
+
+ talloc_free(tall_vty_ctx);
+ talloc_free(root_ctx);
+
+ return 0;
+}
diff --git a/tests/stats/stats_vty_test.vty b/tests/stats/stats_vty_test.vty
new file mode 100644
index 0000000..4ec03c9
--- /dev/null
+++ b/tests/stats/stats_vty_test.vty
@@ -0,0 +1,155 @@
+stats_vty_test> en
+stats_vty_test# configure terminal
+stats_vty_test(config)# list
+...
+ stats reporter statsd
+ no stats reporter statsd
+ stats reporter log
+ no stats reporter log
+ stats interval <0-65535>
+...
+
+stats_vty_test(config)# ### No reporters shall be configured by default
+stats_vty_test(config)# show running-config
+... !stats reporter
+
+
+stats_vty_test(config)# ### Create a statsd reporter
+stats_vty_test(config)# stats reporter statsd
+stats_vty_test(config-stats)# list
+...
+ local-ip ADDR
+ no local-ip
+ remote-ip ADDR
+ remote-port <1-65535>
+ mtu <100-65535>
+ no mtu
+ prefix PREFIX
+ no prefix
+ level (global|peer|subscriber)
+ enable
+ disable
+ flush-period <0-65535>
+...
+
+stats_vty_test(config-stats)# show running-config
+...
+stats reporter statsd
+ disable
+ level global
+ no prefix
+stats interval 5
+...
+
+stats_vty_test(config-stats)# level subscriber
+stats_vty_test(config-stats)# prefix statsd-prefix
+stats_vty_test(config-stats)# show running-config
+...
+stats reporter statsd
+ disable
+ level subscriber
+ prefix statsd-prefix
+...
+
+stats_vty_test(config-stats)# remote-ip 192.168.1.200
+stats_vty_test(config-stats)# remote-port 6969
+stats_vty_test(config-stats)# show running-config
+...
+stats reporter statsd
+ disable
+ remote-ip 192.168.1.200
+ remote-port 6969
+... !local-ip
+
+stats_vty_test(config-stats)# local-ip 192.168.1.100
+stats_vty_test(config-stats)# show running-config
+...
+stats reporter statsd
+ disable
+ remote-ip 192.168.1.200
+ remote-port 6969
+ local-ip 192.168.1.100
+...
+
+stats_vty_test(config-stats)# no local-ip
+stats_vty_test(config-stats)# show running-config
+...
+stats reporter statsd
+... !local-ip
+
+stats_vty_test(config-stats)# mtu 1337
+stats_vty_test(config-stats)# show running-config
+...
+stats reporter statsd
+ disable
+ remote-ip 192.168.1.200
+ remote-port 6969
+ mtu 1337
+...
+
+stats_vty_test(config-stats)# no mtu
+stats_vty_test(config-stats)# show running-config
+...
+stats reporter statsd
+... !mtu
+
+stats_vty_test(config-stats)# flush-period 43556
+stats_vty_test(config-stats)# show running-config
+...
+stats reporter statsd
+ disable
+ remote-ip 192.168.1.200
+ remote-port 6969
+ level subscriber
+ prefix statsd-prefix
+ flush-period 43556
+...
+
+stats_vty_test(config-stats)# flush-period 0
+stats_vty_test(config-stats)# show running-config
+...
+stats reporter statsd
+... !flush-period
+
+stats_vty_test(config-stats)# enable
+stats_vty_test(config-stats)# exit
+stats_vty_test(config)# show running-config
+...
+stats reporter statsd
+ disable
+ remote-ip 192.168.1.200
+ remote-port 6969
+ level subscriber
+ prefix statsd-prefix
+ enable
+...
+
+
+stats_vty_test(config)# ### Create a statsd reporter
+stats_vty_test(config)# stats reporter log
+stats_vty_test(config-stats)# level peer
+stats_vty_test(config-stats)# prefix log-prefix
+stats_vty_test(config-stats)# enable
+stats_vty_test(config-stats)# exit
+stats_vty_test(config)# show running-config
+...
+stats reporter statsd
+ disable
+ remote-ip 192.168.1.200
+ remote-port 6969
+ level subscriber
+ prefix statsd-prefix
+ enable
+stats reporter log
+ disable
+ level peer
+ prefix log-prefix
+ enable
+...
+
+
+stats_vty_test(config)# stats interval 1337
+stats_vty_test(config)# show running-config
+...
+stats interval 1337
+...