Gitiles
Code Review Sign In
gerrit.osmocom.org / simtrace2 / d1c65361546203e6c886ff4b8d27ef71696ef76e / firmware
  1. fc87c24 mode_cardem: Build on platforms without WWAN_PERST suppotrt by Harald Welte · 7 years ago
  2. f231541 Fix typos in usb.c, llist_irqsafe.h and dfu.h by Harald Welte · 7 years ago
  3. 119624f WIP: use local_irq_{save,restore}() by Harald Welte · 7 years ago
  4. 7b36306 [firmware] WIP: make talloc irq-safe by Harald Welte · 7 years ago
  5. eb50c9f [firmware] sim_switch + wwan_perst: Don't re-initialize by Harald Welte · 7 years ago
  6. 965d5c9 [firmware] cardemu: Skip CARD_INSERT if board doesn't support it by Harald Welte · 7 years ago
  7. 514c6d1 [firmware] wwan_perst: Print index when releasing WWAN_PERST by Harald Welte · 7 years ago
  8. e7f2f9a [firmware] wwam_led: use 0/1 instead of 1/2 by Harald Welte · 7 years ago
  9. 4e837d4 [firmware] card_pres: use modem number at start of line by Harald Welte · 7 years ago
  10. b52b886 [firmware] card_pres: Use 0/1 index number instead of 1/2 by Harald Welte · 7 years ago
  11. c47fc5f set local slot LED according to remote/local state. by Harald Welte · 7 years ago
  12. 02d0ec6 uart_console: Re-start watchdog during busy-waiting for serial chars by Harald Welte · 7 years ago
  13. 3b64695 Fix swapped manufacturer/product strings by Harald Welte · 7 years ago 0.4
  14. 23c00b6 cardemu: Fix interpretation of MSGC_MODEM messages by Harald Welte · 7 years ago
  15. 2539917 dfu: make sure to not bloat the loader with main board init stuff. by Harald Welte · 7 years ago
  16. 0709d2d perst/sim_switch: Log events using TRACE_INFO by Harald Welte · 7 years ago
  17. 44622df consistently use 0-based counting of modems/slots by Harald Welte · 7 years ago
  18. b91f6ad firmware: fix various compiler warnings by Harald Welte · 7 years ago
  19. 5c583d3 Generalize SIM switching code and allow local/remote switching via USB by Harald Welte · 7 years ago
  20. 114e74d wwan_perst: Warn if somebody failed to initialize us by Harald Welte · 7 years ago
  21. 2e9254a cardem: Implement WWAN Modem reset via USB by Harald Welte · 7 years ago
  22. cb093ce wwan_perst: Support varying timeout and permanent active/inactive by Harald Welte · 7 years ago
  23. 25a9a80 Convert to new generalized SIMTRACE2 USB protocol by Harald Welte · 7 years ago
  24. ed1efc5 qmod: debug_cmd: Avoid 'Unknown command' for valid commands by Harald Welte · 7 years ago
  25. f8c83a4 Make hardfault handler a bit more verbose by Harald Welte · 7 years ago
  26. 2817498 qmod: Initialize ST12 specific I/O pins only on ST12 by Harald Welte · 7 years ago
  27. 8e7fca3 migrate from req_ctx to msgb by Harald Welte · 7 years ago
  28. eb81d23 import libosmocore msgb handling (and dependencies) by Harald Welte · 7 years ago
  29. 0380d74 Makefile: remove .p files during 'make clean' by Harald Welte · 7 years ago
  30. 9457bf7 Makefile: Don't warn about failed inlines by Harald Welte · 7 years ago
  31. 9ac794c Add llist_add_irqsafe() similar to llist_add_tail_irqsafe() by Harald Welte · 7 years ago
  32. caca0b1 Makefile: Add new 'combined' target to build combined DFU+APP image by Harald Welte · 7 years ago
  33. 6d1128e QMOD: Add code to determine SIM Card presence by Harald Welte · 7 years ago
  34. 7e4390f qmod: wwan_led.c: Fix handling of LED for second Modem by Harald Welte · 7 years ago
  35. 9164a6d qmod: Disable various console commands on ST34 by Harald Welte · 7 years ago
  36. 2cbc9b2 use same USB Product ID for DFU and runtime mode by Harald Welte · 7 years ago
  37. 601e0d3 update + split README into general and firmware-specific part by Harald Welte · 8 years ago
  38. 3d4869c add missing usbstring.c by Harald Welte · 8 years ago
  39. 353330d qmod: Fix polarity of SPDT switch by Harald Welte · 8 years ago
  40. 3bbaba0 DFU: Disable LED blinking code by Harald Welte · 8 years ago
  41. e8869fb DFU: Resolve DFU runtime descriptor dynamically from descriptors by Harald Welte · 8 years ago
  42. 5b108d8 DFU: initialize g_dfu during real power up by Harald Welte · 8 years ago
  43. abba8a8 LED: Introduce LED blinking pattern code by Harald Welte · 8 years ago
  44. 054216d usb: Use different SubClass values for card-emulation and sniffer by Harald Welte · 8 years ago
  45. eab7e45 USB: Don't specify Class/Subclass 0xff at device level by Harald Welte · 8 years ago
  46. 495a67d usb: consistently use named structure initializers by Harald Welte · 8 years ago
  47. 912b183 qmod: Use different Interface Strings for Modem1+2 / Modem 3+4 by Harald Welte · 8 years ago
  48. 809e584 qmod: Add code to switch between physical and virtual SIM by Harald Welte · 8 years ago
  49. 2bff7cd tc_etu: Don't confiugre unused TIOA pin of TC0 + TC2 by Harald Welte · 8 years ago
  50. 705e899 qmod: (re)activate USB port remapping. by Harald Welte · 8 years ago
  51. 0e29598 qmod: Replace hand-crafted delay loop with call to mdelay() by Harald Welte · 8 years ago
  52. c6e482d qmod eeprom/i2c: Re-start watchdog while slow bit-banging by Harald Welte · 8 years ago
  53. 2363fa0 Generate USB Strings from apps/*/usb_strings.txt files at compile time by Harald Welte · 8 years ago
  54. 1405100 DFU: Introduce board/app-specific override for booting in DFU mode by Harald Welte · 8 years ago
  55. 7214b47 Make sure to print CPU Reset Cause when starting the software by Harald Welte · 8 years ago
  56. 45ebe45 Enable Watchdog (500ms) by Harald Welte · 8 years ago
  57. aaba4af Use Supply Controller to avoid running SAM3 on voltages lower than 3.0V by Harald Welte · 8 years ago
  58. 3ecbf67 only simtrace is bus-powered, SAM3 on qmod + owhw are self-powered by Harald Welte · 8 years ago
  59. 8adf0ac DFU app: call into board_main_top() for qmod related initialization by Harald Welte · 8 years ago
  60. f415d71 Call USBD_Disconnect before software-triggered CPU reset by Harald Welte · 8 years ago
  61. ec0837c change from \r\n (CRLF) to \n\r (LFCR) by Harald Welte · 8 years ago
  62. 0de99cd DFU: String descriptors for DFU alt-interfaces by Harald Welte · 8 years ago 0.2
  63. ac4f66e DFU: Set 10ms bwPollTimeout (lowest possible as per spec) by Harald Welte · 8 years ago
  64. 91fc402 DFU: make sure to properly initialize g_dfu pointer before using it by Harald Welte · 8 years ago
  65. b04f4f0 DFU Runtime: Add missing return after handling USB standard requests by Harald Welte · 8 years ago
  66. e8eea29 dfu: fix cosmetic issue in debug message by Harald Welte · 8 years ago
  67. d1e9634 DFU: fix transitions between runtime and DFU mode by Harald Welte · 8 years ago
  68. db17e83 cstartup: (re-)enable interrupts before calling main() by Harald Welte · 8 years ago
  69. ec9b5ff dfu/main.c: Initialize FLASHD driver before using it by Harald Welte · 8 years ago
  70. 0af4948 cstartup / USBD: Use correct Makefile conditionals for DFU by Harald Welte · 8 years ago
  71. adbe72a Makefile: Define APPLICATION_foo BOARD_bar and ENVIRONMENT_baz #defines by Harald Welte · 8 years ago
  72. e36970c dfu: print Chip ID during boot by Harald Welte · 8 years ago
  73. cab6641 flashd: Set 6 Wait states as per Errata requiremens for Revision A by Harald Welte · 8 years ago
  74. 479e97e DFU: Add missing 'return' after handling generic USB control request by Harald Welte · 8 years ago
  75. 203abf5 dfu_desc: Add some string descriptors and fix configuration desc table by Harald Welte · 8 years ago
  76. ee9ebb3 stdio: Increase max string size to 512 and don't endless-loop!! by Harald Welte · 8 years ago
  77. b2ad7f7 dfu_des.c: Cosmetic changes, use named initializers by Harald Welte · 8 years ago
  78. 0395bd1 move PLLB (for USB) initialization to board_lowlevel.c by Harald Welte · 8 years ago
  79. c430ac1 have local stdio.h file to avoid newlib issues by Harald Welte · 8 years ago
  80. adba0ce fix g_dfu access from both DFU and runtime access by Harald Welte · 8 years ago
  81. 65cca7c ensure g_dfu is linked to start of RAM when building DFU loader by Harald Welte · 8 years ago
  82. db30727 remove obsolete old linker script by Harald Welte · 8 years ago
  83. 32852bc DFU: towards a more complete implementation by Harald Welte · 8 years ago
  84. edf9c9d Makefile: Optimize for size by Harald Welte · 8 years ago
  85. 37b6e41 move last few files from src_board / include_board by Harald Welte · 8 years ago
  86. 964f509 remove pio_capture, we don't use it by Harald Welte · 8 years ago
  87. 96e62a4 stdio.c: fix compiler warning by Harald Welte · 8 years ago
  88. 045ea3e timer.h: Fix compiler warnings about redefinition by Harald Welte · 8 years ago
  89. d09829d Remove newlib dependency, include own stdio/string/assert by Harald Welte · 8 years ago
  90. d525231 fix some compiler warnings by Harald Welte · 8 years ago
  91. d8a003d Structure build system to build for multiple boards/apps/environments by Harald Welte · 8 years ago
  92. a1cd0f3 fix compilation of card_emu_tests by Harald Welte · 8 years ago
  93. 3f5e3dd Change directory structure to align with Atmel softpack by Harald Welte · 8 years ago
  94. 7ed6f3b WIP: Introduce USB DFU code from my at91lib DFU port by Harald Welte · 8 years ago
  95. aa3b867 WIP: split main from board-speciic parts by Harald Welte · 8 years ago
  96. a05ccc9 build efc.o and flashd.o as part of build process by Harald Welte · 8 years ago
  97. e9eaf90 import efc.[ch] and flashd.[ch] from SAM3S softpack 2.1 by Harald Welte · 8 years ago
  98. 1d91058 qmod: Inver initial state of PERST signals by Harald Welte · 8 years ago
  99. 4a9bce1 qmod: invert WWAN_PERST logic (we use transistors now) by Harald Welte · 8 years ago
  100. 6732248 Add support for board version reading via ADC by Harald Welte · 8 years ago