Gitiles
Code Review Sign In
gerrit.osmocom.org / simtrace2 / acd48c51f2b67502a5eed47074e0dde3cab6116d
  1. acd48c5 HACK: always use the USART interrupt handler of mode_cardemu() by Harald Welte · 9 years ago
  2. fcdd660 card_emu: Don't de-reference a NULL variable by Harald Welte · 9 years ago
  3. fde250a uart_console.c: Don't redefine constants from board.h by Harald Welte · 9 years ago
  4. 715bc05 Increase serial console sped to 230400 bps by Harald Welte · 9 years ago
  5. 12d4bdf mode_cardemu: Process RX interrupts before TX by Harald Welte · 9 years ago
  6. dda7355 card_emu: Only transmit NULL byte from the right state by Harald Welte · 9 years ago
  7. f1697e2 card_emu: Only allocate a new buffer if needed in send_tpdu_header() by Harald Welte · 9 years ago
  8. acae412 explicitly inform card_emu once data to transmit has arrived by Harald Welte · 9 years ago
  9. 8a416b1 mode_cardemu: fix ordering of events when switching rx/tx mode by Harald Welte · 9 years ago
  10. 45688d4 mode_cardemu: Disable UART TXRDY generation if we don't have data to TX by Harald Welte · 9 years ago
  11. 349c54b req_ctx: LF -> CR+LF by Harald Welte · 9 years ago
  12. 22925ea test: Add TRACE_INFO and TRACE_ERROR definitions by Harald Welte · 9 years ago
  13. 4678388 board_lowlevel: More comments about clock initialization by Harald Welte · 9 years ago
  14. ebbb645 req_ctx: Fix allocation (allocate 1 block, not all) and call _init() by Harald Welte · 9 years ago
  15. 54cb3d0 host_communication/card_emu: adapt to nwe req_ctx / queuing paradignm by Harald Welte · 9 years ago
  16. f672e9d req_ctx: Convert from hand-coded linked lists to linuxlist.h by Harald Welte · 9 years ago
  17. b66ce24 req_ctx: Add better explanation about the various states by Harald Welte · 9 years ago
  18. 22bf67f card_emu: Use \r\n instead of \n by Harald Welte · 9 years ago
  19. 708d85c trace.h: Don't print file/function name in TRACE_DEBUG() by Harald Welte · 9 years ago
  20. c0bd7f0 mode_cardemu: Move GPIO detection to IRQ, use ring buffer for UART RX by Harald Welte · 9 years ago
  21. 47ee283 card_emu_io_statechg(): properly determine edges from levels by Harald Welte · 9 years ago
  22. 99f62a6 mode_cardemu: update_fidi just needs to execute by Harald Welte · 9 years ago
  23. 2ad0ca1 host_communication: Fix TRACE_ERROR syntax by Harald Welte · 9 years ago
  24. 43f7949 card_emu: Add TRACE_DEBUG once TPDU header is sent to USB by Harald Welte · 9 years ago
  25. b086ab0 owhw: Fix GPIO for USIM1_RST (24, not 23!) and enable SET_USIM1_PRES by Harald Welte · 9 years ago
  26. 9dbc46e mode_cardemu: Proper enabling/disabling of USART IRQ sources by Harald Welte · 9 years ago
  27. ba0c688 owhw: Make owhw/board.h the default for now by Harald Welte · 9 years ago
  28. 4dc3db7 req_ctx: Use only 10 small buffers, and no large ones by Harald Welte · 9 years ago
  29. 203ea19 req_ctx: Use the linked lists between req_ctx to ensure ordering by Harald Welte · 9 years ago
  30. bd71768 mode_card_emu: connect the update_fidi() callback by Harald Welte · 9 years ago
  31. 2a6d3af re-introduce req_ctx buffers into the host communication by Harald Welte · 9 years ago
  32. 29f8f0e improvements in req_ctx debugging by Harald Welte · 9 years ago
  33. 2fb5996 owhw: fix GPIO definitions (output low level by default) by Harald Welte · 9 years ago
  34. 8c49636 card_emu.c: avoid re-defining update_fidi() symbol by Harald Welte · 9 years ago
  35. 390760a add board/owhw.c by Harald Welte · 9 years ago
  36. 54a7cec Add card_emu_target.c to bind card_emu.c code into target firmware by Harald Welte · 9 years ago
  37. 17db2f1 card_emu: Fix PTS checksum verification by Harald Welte · 9 years ago
  38. 4ba66d0 implement forwarding of PTS/PPS from emulator to host PC + test case by Harald Welte · 9 years ago
  39. 86d047b card_emu_test: Verify content of emulator->reader bytes by Harald Welte · 9 years ago
  40. 0ef96d5 card_emu: Ensure the length is properly set on a TPDU header rctx by Harald Welte · 9 years ago
  41. 0ab6fcd card_emu_tests: Verify context of USB request contexts by Harald Welte · 9 years ago
  42. c043e64 card_emu_tests: move test cases into functions by Harald Welte · 9 years ago
  43. eef6c2a card_emu_test: Add test for card-TX (reader-RX) APDU by Harald Welte · 9 years ago
  44. f16b618 card_emu: Fix the length checks for transmit beyond rctx->tot_len by Harald Welte · 9 years ago
  45. 22cdf2a card_sim: fix passing handle to tc_etu_*() functions by Harald Welte · 9 years ago
  46. 6bf8c12 update card_emu_tests to recent card_emu changes by Harald Welte · 9 years ago
  47. 042f0d3 tc_etu: Add explicit enable/disable functions by Harald Welte · 9 years ago
  48. 855ba9e card_emu: Ensure TX happens synchronously before state changes by Harald Welte · 9 years ago
  49. 849269f add OWHW board.h file by Harald Welte · 9 years ago
  50. 2d3371e split board.h into generic part and simtrace-specific part by Harald Welte · 9 years ago
  51. 61bb30e card_emu: Correctly handle SW after reader -> card data phase by Harald Welte · 9 years ago
  52. 84ec252 card_emu_test: test APDUs with both Rx and Tx data phase by Harald Welte · 9 years ago
  53. 4d80467 card_emu: Fix state transitions for both Rx and Tx data phase by Harald Welte · 9 years ago
  54. b5288e8 card_emu: Introduce new flush_rx_buffer() function and use it by Harald Welte · 9 years ago
  55. e7194ab card_emu: Ensure to re-set PTS state when coming out of reset by Harald Welte · 9 years ago
  56. 52922ff card_emu: Properly handle end of a procedure-byte carrying REQ_CTX by Harald Welte · 9 years ago
  57. 05b41c6 card_emu: fix set_tpdu_state() by Harald Welte · 9 years ago
  58. 2935b3c card_emu: detect end of TX data from CEMU_DATA_F_FINAL by Harald Welte · 9 years ago
  59. b436286 card_emu_tests: extend first TPDU test to sending PB + SW in response by Harald Welte · 9 years ago
  60. 836990d req_ctx: Fix compiler warnings by Harald Welte · 9 years ago
  61. d79dc4f card_emu: Implement get_byte_pts() by Harald Welte · 9 years ago
  62. 4c473da card_emu: Fail with assert in case next_tpdu_state from wrong state by Harald Welte · 9 years ago
  63. 612d65a card_emu: Make update_fidi() void by Harald Welte · 9 years ago
  64. 16cf408 card_emu.c: More comments about data structures by Harald Welte · 9 years ago
  65. 9d3e382 initial commit of more code towards card emulation by Harald Welte · 9 years ago
  66. f64f688 move ARRAY_SIZE() definition to utils.h by Harald Welte · 9 years ago
  67. 30a53f8 Move Fi/Di calculation functions to separate C file by Harald Welte · 9 years ago
  68. 6d44c1f USB: Add manufacturer name string descriptor by Harald Welte · 9 years ago
  69. 8a5b580 CCID usb descriptor: We support 3V only, not 5V. by Harald Welte · 9 years ago
  70. ec4fe23 Mark more local functions as static by Harald Welte · 9 years ago
  71. 844db57 change to own USB vendor/device ID by Harald Welte · 9 years ago
  72. beb7293 USB descriptors: call it SIMtrace 2 and add spaces to strings by Harald Welte · 9 years ago
  73. 8d6a5d8 move USBDDriverCallbacks_ConfigurationChanged() to main.c by Harald Welte · 9 years ago
  74. d4c1421 conf_func: Mark const and static. by Harald Welte · 9 years ago
  75. fefd571 conf_func: Use named struct initializers and named array subscripts by Harald Welte · 9 years ago
  76. 15d72cc add some comments on the conf_func members by Harald Welte · 9 years ago
  77. 89690c9 Added README file by Christina Quast · 9 years ago
  78. 235409a simtrace.h: Increased host to SIMtrace buf size by Christina Quast · 9 years ago
  79. 3d8c093 main: Increase timeout for USB configured state by Christina Quast · 9 years ago
  80. ad6f4d3 replace.py: Moved replace func,mitm: addr book replace by Christina Quast · 9 years ago
  81. 2cafadb ccid_select.py: added comment;this file is test code by Christina Quast · 9 years ago
  82. 19ed529 apdu_split.py: INS array updated,CLA sync disabled! by Christina Quast · 9 years ago
  83. 8271bd0 simtrace.py: Find device without config change by Christina Quast · 9 years ago
  84. ca0ebfd mitm.py: Bugfix: Always check for APDU_S_SEND_DATA by Christina Quast · 9 years ago
  85. a929bc8 ccid_raw.py: SendTransmit: Pass list instead of array by Christina Quast · 9 years ago
  86. ebd0fa9 gsmtap.py: Send ATR bytes as test command by Christina Quast · 9 years ago
  87. 3742ef1 simtrace.py: Comment to remove test func select_file by Christina Quast · 9 years ago
  88. 4930ea6 ccid.py: Removed read_bin command by Christina Quast · 9 years ago
  89. e0832d6 serial_pysim.py: Cleanup: early test code for serial pysim communication by Christina Quast · 9 years ago
  90. ba486b6 simtrace.py: remove unused cmd line option by Christina Quast · 9 years ago
  91. 66224b7 Removed unused phone.py by Christina Quast · 9 years ago
  92. 427ae35 sniffer.py: Removed unused find_dev function by Christina Quast · 9 years ago
  93. 020e5d6 mitm.py: Pass device to do_mitm function by Christina Quast · 9 years ago
  94. f25a760 simtrace.py: Cleaned up unused functions by Christina Quast · 9 years ago
  95. bd5b8bd usb.c: Corrected grammatical mistake by Christina Quast · 9 years ago
  96. 5cf676d sniffer.py: Removed redundant find_dev function by Christina Quast · 9 years ago
  97. 425717d mitm,sniffer.py: Send APDUs to wireshark by Christina Quast · 9 years ago
  98. 152e878 gsmtap.py: Ported from scapy to socket by Christina Quast · 9 years ago
  99. 59dae92 apdu_split.py: Fixed off by one err in parsing by Christina Quast · 9 years ago
  100. 20e89af apdu_split.py: Changed buf data type list to array by Christina Quast · 9 years ago