Gitiles
Code Review Sign In
gerrit.osmocom.org / simtrace2 / 3bafe4337642bb67454acc83d3023fc6e5ae22b9 / firmware / src_simtrace
  1. 3bafe43 dynamically dispatch USART IRQs by Harald Welte · 9 years ago
  2. dde112e print instance/channel number in all trace messages by Harald Welte · 9 years ago
  3. 8ee15db read SAM3S unique serial number at start and print it by Harald Welte · 9 years ago
  4. 28772eb ADC: Make errata work-arounds depend on run-time detection of chip version by Harald Welte · 9 years ago
  5. cf1c19a src_simtrace/main: debug/trace logging improvements by Harald Welte · 9 years ago
  6. 04e37a8 firmware/main: Disable the rotor unless TRACE_DEBUG by Harald Welte · 9 years ago
  7. 53079bb debug/tracing updates by Harald Welte · 9 years ago
  8. c58bba0 wait for UART Tx completion before switching baud rate at PTS by Harald Welte · 9 years ago
  9. c8beefb wait for transmitter to be done before receiving by Harald Welte · 9 years ago
  10. 903d63a card_emu: Alwasys update state before enabling UART Rx/Tx by Harald Welte · 9 years ago
  11. 52d5546 card_emu: Avoid PTS related race-condition by Harald Welte · 9 years ago
  12. ccb8a22 card_emu: Avoid PTS related race-condition by Harald Welte · 9 years ago
  13. a929f21 card_emu: Differentiate between TRACE_{DEBUG/ERROR/INFO} by Harald Welte · 9 years ago
  14. 07872b6 VCC/ADC: finish implementing VCC detection via ADC by Harald Welte · 9 years ago
  15. 6dcacf3 OWHW: fix operation with second modem/UART by Harald Welte · 9 years ago
  16. 419eb8a WIP: Use ADC to determine VCC voltage by Harald Welte · 9 years ago
  17. ff16065 implement CEMU_USB_MSGT_DT_GET_STATUS by Harald Welte · 9 years ago
  18. 2315e6b ensure git version ends up in firmware image by Harald Welte · 9 years ago
  19. b26d003 split/segment multiple commands from single USB transfer by Harald Welte · 9 years ago
  20. d295b92 ensure usb_msg_hdr contains raw message length by Harald Welte · 9 years ago
  21. b8f9450 shrink ringbuffer size to 128 bytes by Harald Welte · 9 years ago
  22. 9f240b6 use irq-safe version of llist operations between USB callback and main by Harald Welte · 9 years ago
  23. da15ca0 mode_cardemu: mask the USART status register with mask register by Harald Welte · 9 years ago
  24. 3d27c84 host_comm: Fix race condition in handling OUT USB transfers by Harald Welte · 9 years ago
  25. 250cd2c host_communication: set rctx->tot_len after receiving USB transfer by Harald Welte · 9 years ago
  26. 5820ea9 dispatch_usb_command: Ensure list consistency + avoid mem leaks by Harald Welte · 9 years ago
  27. 0eaa992 cardem: Add support for USB host based set/clear of card_insert by Harald Welte · 9 years ago
  28. 7abdb51 ringbuffer: Make ring buffer access irq-save by Harald Welte · 9 years ago
  29. 7dd3dfd convert all src_simtrace code to kernel coding style by Harald Welte · 9 years ago
  30. 1605564 ensure USB config numbers always start from 1 by Harald Welte · 9 years ago
  31. 072dadd main.c: Only call the configure() function of a configuration if it exists by Harald Welte · 9 years ago
  32. 40901a0 various printf/debug output improvements by Harald Welte · 9 years ago
  33. 57b3a25 Add Card-Emulation for second UART/USIM to USB descriptors by Harald Welte · 9 years ago
  34. 13e8202 mode_cardem: Prepare for full support of second UART/USIM by Harald Welte · 9 years ago
  35. 06b27f6 mode_cardemu: Implement CEMU_USB_MSGT_DT_SET_ATR by Harald Welte · 9 years ago
  36. ebb80ed introduce 'main' queue between USB receive and UART TX by Harald Welte · 9 years ago
  37. ad43440 card_emu: Fix various compiler warnings by switch/default/break by Harald Welte · 9 years ago
  38. a0cf200 host_communication: keep track of number of pending/queued req_ctx by Harald Welte · 9 years ago
  39. acd48c5 HACK: always use the USART interrupt handler of mode_cardemu() by Harald Welte · 9 years ago
  40. fcdd660 card_emu: Don't de-reference a NULL variable by Harald Welte · 9 years ago
  41. 12d4bdf mode_cardemu: Process RX interrupts before TX by Harald Welte · 9 years ago
  42. dda7355 card_emu: Only transmit NULL byte from the right state by Harald Welte · 9 years ago
  43. f1697e2 card_emu: Only allocate a new buffer if needed in send_tpdu_header() by Harald Welte · 9 years ago
  44. acae412 explicitly inform card_emu once data to transmit has arrived by Harald Welte · 9 years ago
  45. 8a416b1 mode_cardemu: fix ordering of events when switching rx/tx mode by Harald Welte · 9 years ago
  46. 45688d4 mode_cardemu: Disable UART TXRDY generation if we don't have data to TX by Harald Welte · 9 years ago
  47. 349c54b req_ctx: LF -> CR+LF by Harald Welte · 9 years ago
  48. ebbb645 req_ctx: Fix allocation (allocate 1 block, not all) and call _init() by Harald Welte · 9 years ago
  49. 54cb3d0 host_communication/card_emu: adapt to nwe req_ctx / queuing paradignm by Harald Welte · 9 years ago
  50. f672e9d req_ctx: Convert from hand-coded linked lists to linuxlist.h by Harald Welte · 9 years ago
  51. b66ce24 req_ctx: Add better explanation about the various states by Harald Welte · 9 years ago
  52. 22bf67f card_emu: Use \r\n instead of \n by Harald Welte · 9 years ago
  53. c0bd7f0 mode_cardemu: Move GPIO detection to IRQ, use ring buffer for UART RX by Harald Welte · 9 years ago
  54. 47ee283 card_emu_io_statechg(): properly determine edges from levels by Harald Welte · 9 years ago
  55. 99f62a6 mode_cardemu: update_fidi just needs to execute by Harald Welte · 9 years ago
  56. 2ad0ca1 host_communication: Fix TRACE_ERROR syntax by Harald Welte · 9 years ago
  57. 43f7949 card_emu: Add TRACE_DEBUG once TPDU header is sent to USB by Harald Welte · 9 years ago
  58. 9dbc46e mode_cardemu: Proper enabling/disabling of USART IRQ sources by Harald Welte · 9 years ago
  59. 4dc3db7 req_ctx: Use only 10 small buffers, and no large ones by Harald Welte · 9 years ago
  60. 203ea19 req_ctx: Use the linked lists between req_ctx to ensure ordering by Harald Welte · 9 years ago
  61. bd71768 mode_card_emu: connect the update_fidi() callback by Harald Welte · 9 years ago
  62. 2a6d3af re-introduce req_ctx buffers into the host communication by Harald Welte · 9 years ago
  63. 29f8f0e improvements in req_ctx debugging by Harald Welte · 9 years ago
  64. 2fb5996 owhw: fix GPIO definitions (output low level by default) by Harald Welte · 9 years ago
  65. 8c49636 card_emu.c: avoid re-defining update_fidi() symbol by Harald Welte · 9 years ago
  66. 54a7cec Add card_emu_target.c to bind card_emu.c code into target firmware by Harald Welte · 9 years ago
  67. 17db2f1 card_emu: Fix PTS checksum verification by Harald Welte · 9 years ago
  68. 4ba66d0 implement forwarding of PTS/PPS from emulator to host PC + test case by Harald Welte · 9 years ago
  69. 0ef96d5 card_emu: Ensure the length is properly set on a TPDU header rctx by Harald Welte · 9 years ago
  70. f16b618 card_emu: Fix the length checks for transmit beyond rctx->tot_len by Harald Welte · 9 years ago
  71. 22cdf2a card_sim: fix passing handle to tc_etu_*() functions by Harald Welte · 9 years ago
  72. 042f0d3 tc_etu: Add explicit enable/disable functions by Harald Welte · 9 years ago
  73. 855ba9e card_emu: Ensure TX happens synchronously before state changes by Harald Welte · 9 years ago
  74. 61bb30e card_emu: Correctly handle SW after reader -> card data phase by Harald Welte · 9 years ago
  75. 4d80467 card_emu: Fix state transitions for both Rx and Tx data phase by Harald Welte · 9 years ago
  76. b5288e8 card_emu: Introduce new flush_rx_buffer() function and use it by Harald Welte · 9 years ago
  77. e7194ab card_emu: Ensure to re-set PTS state when coming out of reset by Harald Welte · 9 years ago
  78. 52922ff card_emu: Properly handle end of a procedure-byte carrying REQ_CTX by Harald Welte · 9 years ago
  79. 05b41c6 card_emu: fix set_tpdu_state() by Harald Welte · 9 years ago
  80. 2935b3c card_emu: detect end of TX data from CEMU_DATA_F_FINAL by Harald Welte · 9 years ago
  81. 836990d req_ctx: Fix compiler warnings by Harald Welte · 9 years ago
  82. d79dc4f card_emu: Implement get_byte_pts() by Harald Welte · 9 years ago
  83. 4c473da card_emu: Fail with assert in case next_tpdu_state from wrong state by Harald Welte · 9 years ago
  84. 612d65a card_emu: Make update_fidi() void by Harald Welte · 9 years ago
  85. 16cf408 card_emu.c: More comments about data structures by Harald Welte · 9 years ago
  86. 9d3e382 initial commit of more code towards card emulation by Harald Welte · 9 years ago
  87. f64f688 move ARRAY_SIZE() definition to utils.h by Harald Welte · 9 years ago
  88. 30a53f8 Move Fi/Di calculation functions to separate C file by Harald Welte · 9 years ago
  89. 6d44c1f USB: Add manufacturer name string descriptor by Harald Welte · 9 years ago
  90. 8a5b580 CCID usb descriptor: We support 3V only, not 5V. by Harald Welte · 9 years ago
  91. ec4fe23 Mark more local functions as static by Harald Welte · 9 years ago
  92. beb7293 USB descriptors: call it SIMtrace 2 and add spaces to strings by Harald Welte · 9 years ago
  93. 8d6a5d8 move USBDDriverCallbacks_ConfigurationChanged() to main.c by Harald Welte · 9 years ago
  94. d4c1421 conf_func: Mark const and static. by Harald Welte · 9 years ago
  95. fefd571 conf_func: Use named struct initializers and named array subscripts by Harald Welte · 9 years ago
  96. 15d72cc add some comments on the conf_func members by Harald Welte · 9 years ago
  97. 235409a simtrace.h: Increased host to SIMtrace buf size by Christina Quast · 9 years ago
  98. 3d8c093 main: Increase timeout for USB configured state by Christina Quast · 9 years ago
  99. bd5b8bd usb.c: Corrected grammatical mistake by Christina Quast · 9 years ago
  100. 96025db phone.c: removed comments by Christina Quast · 9 years ago