Gitiles
Code Review Sign In
gerrit.osmocom.org / simtrace2 / 36abece0b129f64934e6522f6d94cdf38213c5e7 / firmware
  1. 36abece enable (empty) sniffer support for SIMtrace board by Kévin Redon · 6 years ago
  2. f9997e9 copy working cardem app to trace by Kévin Redon · 6 years ago
  3. 05cc7f6 ringbuffer: Don't print/TRAC from ringbuffer by Harald Welte · 6 years ago
  4. 4689345 echo all command characters entered on serial console by Harald Welte · 6 years ago
  5. bb2eb19 firmware/test: Add more include paths by Harald Welte · 6 years ago
  6. 9d90d28 Use system include <foo.h> notation for libosmocore headers by Harald Welte · 6 years ago
  7. ebe8b20 Makefile: fix automatic creation of obj directory by Harald Welte · 6 years ago
  8. 1cfc261 apps/dfu/main.c: Avoid variable declaration in for loop initial by Harald Welte · 6 years ago
  9. a9bca48 ring buffer: increase buffer size from 128 to 256 to cope with large debug output by Kévin Redon · 6 years ago
  10. eac1bec console: use buffer and interrupts instead of busy loops for UART debug output by Kévin Redon · 6 years ago
  11. 51c128b DFU: fix typo in USB strings by Kévin Redon · 6 years ago
  12. 869dbfa DFU: incread watchdog timeout and restart watchdog before writing in flash to prevent the watchdog to trigger while flashing by Kévin Redon · 6 years ago
  13. 80303c1 DFU: only boot the application if it has a valid start by Kévin Redon · 6 years ago
  14. d86cab0 DFU: uncomment print message when DFU is forced using the button by Kévin Redon · 6 years ago
  15. b73f0a0 DFU: unlock the flash before writing, verify written data, and relock it by Kévin Redon · 6 years ago
  16. f5869d4 USB: implement USB reset by setting the on-board pull-up on D+ low by Kévin Redon · 6 years ago
  17. 4136c24 USBD: send empty packet when non-existing descriptor string is requested by Kévin Redon · 6 years ago
  18. 318309f dfu: fix address destination check and add stack overwrite check in USBDFU_handle_dnload by Kévin Redon · 6 years ago
  19. 0828b91 README: rewrite to better explain environment variables and point to the wiki for flashing by Kévin Redon · 6 years ago
  20. 76be7c8 fix pointer casting warning by Kévin Redon · 6 years ago
  21. a38a126 fix: initialize uninitialized variable in USBDFU_DFU_RequestHandler by Kévin Redon · 6 years ago
  22. 6822716 add printf attribute declaration to remove warning by Kévin Redon · 6 years ago
  23. a93f727 fix: remove duplicate volatile declaration by Kévin Redon · 6 years ago
  24. 432ba51 add copyright notice by Kévin Redon · 6 years ago
  25. 849d20e Add firmware/TODO.txt that was not committed so far by Harald Welte · 6 years ago
  26. af616ec CCID driver: Use USBD_GetDriver() instead of non-initialized state variable by Harald Welte · 7 years ago
  27. 6051e12 CCID: re-enable control request handler for CCID class requests by Harald Welte · 7 years ago
  28. 7f62c24 USB: Handle DFU requests by USBD.c to keep application callback by Harald Welte · 7 years ago
  29. 75cf93e rename ccid.c to mode_ccid.c to align with mode_cardemu.c by Harald Welte · 7 years ago
  30. 2afd57f cardem: Don't dispatch UART IRQs to possible NULL pointers by Harald Welte · 7 years ago
  31. 0633b25 iso7816_4: Re-trigger watchdog while waiting for character by Harald Welte · 7 years ago
  32. c1e2254 simtrace: Boot into DFU when BOOTLOADER button is pressed by Harald Welte · 7 years ago
  33. 27f5fc6 DFU: Move "Override DFU" (force DFU) code to board-specific section by Harald Welte · 7 years ago
  34. 7b250bf board_simtrace: Add minimal debug menu on debug USART by Harald Welte · 7 years ago
  35. ed75c62 {ccid,sniffer}.c: Add comments on USB callbacks by Harald Welte · 7 years ago
  36. 5c08191 remove dead code (source/phone.c), superseded by card_emu.c/mode_cardemu.c by Harald Welte · 7 years ago
  37. 5e6e8dc Make build of CCID code succeed again on BOARD=simtrace by Harald Welte · 7 years ago
  38. c35998e Makefile: Disable -Wundef and -Wsign-compare for now by Harald Welte · 7 years ago
  39. ba2ad56 fix build of APP=cardem on BOARD=simtrace by Harald Welte · 7 years ago
  40. fc87c24 mode_cardem: Build on platforms without WWAN_PERST suppotrt by Harald Welte · 7 years ago
  41. f231541 Fix typos in usb.c, llist_irqsafe.h and dfu.h by Harald Welte · 7 years ago
  42. 119624f WIP: use local_irq_{save,restore}() by Harald Welte · 7 years ago
  43. 7b36306 [firmware] WIP: make talloc irq-safe by Harald Welte · 7 years ago
  44. eb50c9f [firmware] sim_switch + wwan_perst: Don't re-initialize by Harald Welte · 7 years ago
  45. 965d5c9 [firmware] cardemu: Skip CARD_INSERT if board doesn't support it by Harald Welte · 7 years ago
  46. 514c6d1 [firmware] wwan_perst: Print index when releasing WWAN_PERST by Harald Welte · 7 years ago
  47. e7f2f9a [firmware] wwam_led: use 0/1 instead of 1/2 by Harald Welte · 7 years ago
  48. 4e837d4 [firmware] card_pres: use modem number at start of line by Harald Welte · 7 years ago
  49. b52b886 [firmware] card_pres: Use 0/1 index number instead of 1/2 by Harald Welte · 7 years ago
  50. c47fc5f set local slot LED according to remote/local state. by Harald Welte · 7 years ago
  51. 02d0ec6 uart_console: Re-start watchdog during busy-waiting for serial chars by Harald Welte · 7 years ago
  52. 3b64695 Fix swapped manufacturer/product strings by Harald Welte · 7 years ago 0.4
  53. 23c00b6 cardemu: Fix interpretation of MSGC_MODEM messages by Harald Welte · 7 years ago
  54. 2539917 dfu: make sure to not bloat the loader with main board init stuff. by Harald Welte · 7 years ago
  55. 0709d2d perst/sim_switch: Log events using TRACE_INFO by Harald Welte · 7 years ago
  56. 44622df consistently use 0-based counting of modems/slots by Harald Welte · 7 years ago
  57. b91f6ad firmware: fix various compiler warnings by Harald Welte · 7 years ago
  58. 5c583d3 Generalize SIM switching code and allow local/remote switching via USB by Harald Welte · 7 years ago
  59. 114e74d wwan_perst: Warn if somebody failed to initialize us by Harald Welte · 7 years ago
  60. 2e9254a cardem: Implement WWAN Modem reset via USB by Harald Welte · 7 years ago
  61. cb093ce wwan_perst: Support varying timeout and permanent active/inactive by Harald Welte · 7 years ago
  62. 25a9a80 Convert to new generalized SIMTRACE2 USB protocol by Harald Welte · 7 years ago
  63. ed1efc5 qmod: debug_cmd: Avoid 'Unknown command' for valid commands by Harald Welte · 7 years ago
  64. f8c83a4 Make hardfault handler a bit more verbose by Harald Welte · 7 years ago
  65. 2817498 qmod: Initialize ST12 specific I/O pins only on ST12 by Harald Welte · 7 years ago
  66. 8e7fca3 migrate from req_ctx to msgb by Harald Welte · 7 years ago
  67. eb81d23 import libosmocore msgb handling (and dependencies) by Harald Welte · 7 years ago
  68. 0380d74 Makefile: remove .p files during 'make clean' by Harald Welte · 7 years ago
  69. 9457bf7 Makefile: Don't warn about failed inlines by Harald Welte · 7 years ago
  70. 9ac794c Add llist_add_irqsafe() similar to llist_add_tail_irqsafe() by Harald Welte · 7 years ago
  71. caca0b1 Makefile: Add new 'combined' target to build combined DFU+APP image by Harald Welte · 7 years ago
  72. 6d1128e QMOD: Add code to determine SIM Card presence by Harald Welte · 7 years ago
  73. 7e4390f qmod: wwan_led.c: Fix handling of LED for second Modem by Harald Welte · 7 years ago
  74. 9164a6d qmod: Disable various console commands on ST34 by Harald Welte · 7 years ago
  75. 2cbc9b2 use same USB Product ID for DFU and runtime mode by Harald Welte · 7 years ago
  76. 601e0d3 update + split README into general and firmware-specific part by Harald Welte · 8 years ago
  77. 3d4869c add missing usbstring.c by Harald Welte · 8 years ago
  78. 353330d qmod: Fix polarity of SPDT switch by Harald Welte · 8 years ago
  79. 3bbaba0 DFU: Disable LED blinking code by Harald Welte · 8 years ago
  80. e8869fb DFU: Resolve DFU runtime descriptor dynamically from descriptors by Harald Welte · 8 years ago
  81. 5b108d8 DFU: initialize g_dfu during real power up by Harald Welte · 8 years ago
  82. abba8a8 LED: Introduce LED blinking pattern code by Harald Welte · 8 years ago
  83. 054216d usb: Use different SubClass values for card-emulation and sniffer by Harald Welte · 8 years ago
  84. eab7e45 USB: Don't specify Class/Subclass 0xff at device level by Harald Welte · 8 years ago
  85. 495a67d usb: consistently use named structure initializers by Harald Welte · 8 years ago
  86. 912b183 qmod: Use different Interface Strings for Modem1+2 / Modem 3+4 by Harald Welte · 8 years ago
  87. 809e584 qmod: Add code to switch between physical and virtual SIM by Harald Welte · 8 years ago
  88. 2bff7cd tc_etu: Don't confiugre unused TIOA pin of TC0 + TC2 by Harald Welte · 8 years ago
  89. 705e899 qmod: (re)activate USB port remapping. by Harald Welte · 8 years ago
  90. 0e29598 qmod: Replace hand-crafted delay loop with call to mdelay() by Harald Welte · 8 years ago
  91. c6e482d qmod eeprom/i2c: Re-start watchdog while slow bit-banging by Harald Welte · 8 years ago
  92. 2363fa0 Generate USB Strings from apps/*/usb_strings.txt files at compile time by Harald Welte · 8 years ago
  93. 1405100 DFU: Introduce board/app-specific override for booting in DFU mode by Harald Welte · 8 years ago
  94. 7214b47 Make sure to print CPU Reset Cause when starting the software by Harald Welte · 8 years ago
  95. 45ebe45 Enable Watchdog (500ms) by Harald Welte · 8 years ago
  96. aaba4af Use Supply Controller to avoid running SAM3 on voltages lower than 3.0V by Harald Welte · 8 years ago
  97. 3ecbf67 only simtrace is bus-powered, SAM3 on qmod + owhw are self-powered by Harald Welte · 8 years ago
  98. 8adf0ac DFU app: call into board_main_top() for qmod related initialization by Harald Welte · 8 years ago
  99. f415d71 Call USBD_Disconnect before software-triggered CPU reset by Harald Welte · 8 years ago
  100. ec0837c change from \r\n (CRLF) to \n\r (LFCR) by Harald Welte · 8 years ago