Gitiles
Code Review Sign In
gerrit.osmocom.org / simtrace2 / 28772ebcdc17e9607cfb8051e510291669f25063 / firmware
  1. 28772eb ADC: Make errata work-arounds depend on run-time detection of chip version by Harald Welte · 9 years ago
  2. cf1c19a src_simtrace/main: debug/trace logging improvements by Harald Welte · 9 years ago
  3. 04e37a8 firmware/main: Disable the rotor unless TRACE_DEBUG by Harald Welte · 9 years ago
  4. 5541e8a USBD_HAL: Hard-code TRACE_LEVEL_WARNING by Harald Welte · 9 years ago
  5. 53079bb debug/tracing updates by Harald Welte · 9 years ago
  6. c58bba0 wait for UART Tx completion before switching baud rate at PTS by Harald Welte · 9 years ago
  7. c8beefb wait for transmitter to be done before receiving by Harald Welte · 9 years ago
  8. 903d63a card_emu: Alwasys update state before enabling UART Rx/Tx by Harald Welte · 9 years ago
  9. 52d5546 card_emu: Avoid PTS related race-condition by Harald Welte · 9 years ago
  10. ccb8a22 card_emu: Avoid PTS related race-condition by Harald Welte · 9 years ago
  11. a929f21 card_emu: Differentiate between TRACE_{DEBUG/ERROR/INFO} by Harald Welte · 9 years ago
  12. 07872b6 VCC/ADC: finish implementing VCC detection via ADC by Harald Welte · 9 years ago
  13. 6dcacf3 OWHW: fix operation with second modem/UART by Harald Welte · 9 years ago
  14. 419eb8a WIP: Use ADC to determine VCC voltage by Harald Welte · 9 years ago
  15. ff16065 implement CEMU_USB_MSGT_DT_GET_STATUS by Harald Welte · 9 years ago
  16. 2315e6b ensure git version ends up in firmware image by Harald Welte · 9 years ago
  17. b26d003 split/segment multiple commands from single USB transfer by Harald Welte · 9 years ago
  18. d295b92 ensure usb_msg_hdr contains raw message length by Harald Welte · 9 years ago
  19. b8f9450 shrink ringbuffer size to 128 bytes by Harald Welte · 9 years ago
  20. 9f240b6 use irq-safe version of llist operations between USB callback and main by Harald Welte · 9 years ago
  21. da15ca0 mode_cardemu: mask the USART status register with mask register by Harald Welte · 9 years ago
  22. 3d27c84 host_comm: Fix race condition in handling OUT USB transfers by Harald Welte · 9 years ago
  23. 250cd2c host_communication: set rctx->tot_len after receiving USB transfer by Harald Welte · 9 years ago
  24. 372f4cc board_lowlevel: Use LED definitions from board.h by Harald Welte · 9 years ago
  25. 5820ea9 dispatch_usb_command: Ensure list consistency + avoid mem leaks by Harald Welte · 9 years ago
  26. 0eaa992 cardem: Add support for USB host based set/clear of card_insert by Harald Welte · 9 years ago
  27. 7abdb51 ringbuffer: Make ring buffer access irq-save by Harald Welte · 9 years ago
  28. 7dd3dfd convert all src_simtrace code to kernel coding style by Harald Welte · 9 years ago
  29. 1605564 ensure USB config numbers always start from 1 by Harald Welte · 9 years ago
  30. 072dadd main.c: Only call the configure() function of a configuration if it exists by Harald Welte · 9 years ago
  31. 40901a0 various printf/debug output improvements by Harald Welte · 9 years ago
  32. 57b3a25 Add Card-Emulation for second UART/USIM to USB descriptors by Harald Welte · 9 years ago
  33. 13e8202 mode_cardem: Prepare for full support of second UART/USIM by Harald Welte · 9 years ago
  34. 06b27f6 mode_cardemu: Implement CEMU_USB_MSGT_DT_SET_ATR by Harald Welte · 9 years ago
  35. ebb80ed introduce 'main' queue between USB receive and UART TX by Harald Welte · 9 years ago
  36. ad43440 card_emu: Fix various compiler warnings by switch/default/break by Harald Welte · 9 years ago
  37. 5e00400 board_lowlevel.c: Improve main oscillator initialization by Harald Welte · 9 years ago
  38. a0cf200 host_communication: keep track of number of pending/queued req_ctx by Harald Welte · 9 years ago
  39. acd48c5 HACK: always use the USART interrupt handler of mode_cardemu() by Harald Welte · 9 years ago
  40. fcdd660 card_emu: Don't de-reference a NULL variable by Harald Welte · 9 years ago
  41. fde250a uart_console.c: Don't redefine constants from board.h by Harald Welte · 9 years ago
  42. 715bc05 Increase serial console sped to 230400 bps by Harald Welte · 9 years ago
  43. 12d4bdf mode_cardemu: Process RX interrupts before TX by Harald Welte · 9 years ago
  44. dda7355 card_emu: Only transmit NULL byte from the right state by Harald Welte · 9 years ago
  45. f1697e2 card_emu: Only allocate a new buffer if needed in send_tpdu_header() by Harald Welte · 9 years ago
  46. acae412 explicitly inform card_emu once data to transmit has arrived by Harald Welte · 9 years ago
  47. 8a416b1 mode_cardemu: fix ordering of events when switching rx/tx mode by Harald Welte · 9 years ago
  48. 45688d4 mode_cardemu: Disable UART TXRDY generation if we don't have data to TX by Harald Welte · 9 years ago
  49. 349c54b req_ctx: LF -> CR+LF by Harald Welte · 9 years ago
  50. 22925ea test: Add TRACE_INFO and TRACE_ERROR definitions by Harald Welte · 9 years ago
  51. 4678388 board_lowlevel: More comments about clock initialization by Harald Welte · 9 years ago
  52. ebbb645 req_ctx: Fix allocation (allocate 1 block, not all) and call _init() by Harald Welte · 9 years ago
  53. 54cb3d0 host_communication/card_emu: adapt to nwe req_ctx / queuing paradignm by Harald Welte · 9 years ago
  54. f672e9d req_ctx: Convert from hand-coded linked lists to linuxlist.h by Harald Welte · 9 years ago
  55. b66ce24 req_ctx: Add better explanation about the various states by Harald Welte · 9 years ago
  56. 22bf67f card_emu: Use \r\n instead of \n by Harald Welte · 9 years ago
  57. 708d85c trace.h: Don't print file/function name in TRACE_DEBUG() by Harald Welte · 9 years ago
  58. c0bd7f0 mode_cardemu: Move GPIO detection to IRQ, use ring buffer for UART RX by Harald Welte · 9 years ago
  59. 47ee283 card_emu_io_statechg(): properly determine edges from levels by Harald Welte · 9 years ago
  60. 99f62a6 mode_cardemu: update_fidi just needs to execute by Harald Welte · 9 years ago
  61. 2ad0ca1 host_communication: Fix TRACE_ERROR syntax by Harald Welte · 9 years ago
  62. 43f7949 card_emu: Add TRACE_DEBUG once TPDU header is sent to USB by Harald Welte · 9 years ago
  63. b086ab0 owhw: Fix GPIO for USIM1_RST (24, not 23!) and enable SET_USIM1_PRES by Harald Welte · 9 years ago
  64. 9dbc46e mode_cardemu: Proper enabling/disabling of USART IRQ sources by Harald Welte · 9 years ago
  65. ba0c688 owhw: Make owhw/board.h the default for now by Harald Welte · 9 years ago
  66. 4dc3db7 req_ctx: Use only 10 small buffers, and no large ones by Harald Welte · 9 years ago
  67. 203ea19 req_ctx: Use the linked lists between req_ctx to ensure ordering by Harald Welte · 9 years ago
  68. bd71768 mode_card_emu: connect the update_fidi() callback by Harald Welte · 9 years ago
  69. 2a6d3af re-introduce req_ctx buffers into the host communication by Harald Welte · 9 years ago
  70. 29f8f0e improvements in req_ctx debugging by Harald Welte · 9 years ago
  71. 2fb5996 owhw: fix GPIO definitions (output low level by default) by Harald Welte · 9 years ago
  72. 8c49636 card_emu.c: avoid re-defining update_fidi() symbol by Harald Welte · 9 years ago
  73. 390760a add board/owhw.c by Harald Welte · 9 years ago
  74. 54a7cec Add card_emu_target.c to bind card_emu.c code into target firmware by Harald Welte · 9 years ago
  75. 17db2f1 card_emu: Fix PTS checksum verification by Harald Welte · 9 years ago
  76. 4ba66d0 implement forwarding of PTS/PPS from emulator to host PC + test case by Harald Welte · 9 years ago
  77. 86d047b card_emu_test: Verify content of emulator->reader bytes by Harald Welte · 9 years ago
  78. 0ef96d5 card_emu: Ensure the length is properly set on a TPDU header rctx by Harald Welte · 9 years ago
  79. 0ab6fcd card_emu_tests: Verify context of USB request contexts by Harald Welte · 9 years ago
  80. c043e64 card_emu_tests: move test cases into functions by Harald Welte · 9 years ago
  81. eef6c2a card_emu_test: Add test for card-TX (reader-RX) APDU by Harald Welte · 9 years ago
  82. f16b618 card_emu: Fix the length checks for transmit beyond rctx->tot_len by Harald Welte · 9 years ago
  83. 22cdf2a card_sim: fix passing handle to tc_etu_*() functions by Harald Welte · 9 years ago
  84. 6bf8c12 update card_emu_tests to recent card_emu changes by Harald Welte · 9 years ago
  85. 042f0d3 tc_etu: Add explicit enable/disable functions by Harald Welte · 9 years ago
  86. 855ba9e card_emu: Ensure TX happens synchronously before state changes by Harald Welte · 9 years ago
  87. 849269f add OWHW board.h file by Harald Welte · 9 years ago
  88. 2d3371e split board.h into generic part and simtrace-specific part by Harald Welte · 9 years ago
  89. 61bb30e card_emu: Correctly handle SW after reader -> card data phase by Harald Welte · 9 years ago
  90. 84ec252 card_emu_test: test APDUs with both Rx and Tx data phase by Harald Welte · 9 years ago
  91. 4d80467 card_emu: Fix state transitions for both Rx and Tx data phase by Harald Welte · 9 years ago
  92. b5288e8 card_emu: Introduce new flush_rx_buffer() function and use it by Harald Welte · 9 years ago
  93. e7194ab card_emu: Ensure to re-set PTS state when coming out of reset by Harald Welte · 9 years ago
  94. 52922ff card_emu: Properly handle end of a procedure-byte carrying REQ_CTX by Harald Welte · 9 years ago
  95. 05b41c6 card_emu: fix set_tpdu_state() by Harald Welte · 9 years ago
  96. 2935b3c card_emu: detect end of TX data from CEMU_DATA_F_FINAL by Harald Welte · 9 years ago
  97. b436286 card_emu_tests: extend first TPDU test to sending PB + SW in response by Harald Welte · 9 years ago
  98. 836990d req_ctx: Fix compiler warnings by Harald Welte · 9 years ago
  99. d79dc4f card_emu: Implement get_byte_pts() by Harald Welte · 9 years ago
  100. 4c473da card_emu: Fail with assert in case next_tpdu_state from wrong state by Harald Welte · 9 years ago