Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
simtrace2
/
1afb70a69d01c320ff9d268cd37dada451126f0f
« Previous
66de830
host: Switch SIM to remote and issue modem reset on startup
by Harald Welte
· 7 years ago
23c00b6
cardemu: Fix interpretation of MSGC_MODEM messages
by Harald Welte
· 7 years ago
2539917
dfu: make sure to not bloat the loader with main board init stuff.
by Harald Welte
· 7 years ago
0709d2d
perst/sim_switch: Log events using TRACE_INFO
by Harald Welte
· 7 years ago
44622df
consistently use 0-based counting of modems/slots
by Harald Welte
· 7 years ago
b91f6ad
firmware: fix various compiler warnings
by Harald Welte
· 7 years ago
9f38ddd
host: fix various compiler warnings
by Harald Welte
· 7 years ago
d039605
host: Split transport from slot
by Harald Welte
· 7 years ago
08b77ba
host: split the transport layer from card emulation
by Harald Welte
· 7 years ago
296c401
host: cosmetic cleanup, function renaming
by Harald Welte
· 7 years ago
5c583d3
Generalize SIM switching code and allow local/remote switching via USB
by Harald Welte
· 7 years ago
114e74d
wwan_perst: Warn if somebody failed to initialize us
by Harald Welte
· 7 years ago
2e9254a
cardem: Implement WWAN Modem reset via USB
by Harald Welte
· 7 years ago
cb093ce
wwan_perst: Support varying timeout and permanent active/inactive
by Harald Welte
· 7 years ago
25a9a80
Convert to new generalized SIMTRACE2 USB protocol
by Harald Welte
· 7 years ago
ed1efc5
qmod: debug_cmd: Avoid 'Unknown command' for valid commands
by Harald Welte
· 7 years ago
f8c83a4
Make hardfault handler a bit more verbose
by Harald Welte
· 7 years ago
2817498
qmod: Initialize ST12 specific I/O pins only on ST12
by Harald Welte
· 7 years ago
8e7fca3
migrate from req_ctx to msgb
by Harald Welte
· 7 years ago
eb81d23
import libosmocore msgb handling (and dependencies)
by Harald Welte
· 7 years ago
0380d74
Makefile: remove .p files during 'make clean'
by Harald Welte
· 7 years ago
9457bf7
Makefile: Don't warn about failed inlines
by Harald Welte
· 7 years ago
9ac794c
Add llist_add_irqsafe() similar to llist_add_tail_irqsafe()
by Harald Welte
· 7 years ago
41eb98b
board_gpio.gnumeric: Update to QMOD v3 (SIMPRES1/SIMPRES2)
by Harald Welte
· 7 years ago
caca0b1
Makefile: Add new 'combined' target to build combined DFU+APP image
by Harald Welte
· 7 years ago
6d1128e
QMOD: Add code to determine SIM Card presence
by Harald Welte
· 7 years ago
7e4390f
qmod: wwan_led.c: Fix handling of LED for second Modem
by Harald Welte
· 7 years ago
9164a6d
qmod: Disable various console commands on ST34
by Harald Welte
· 7 years ago
2cbc9b2
use same USB Product ID for DFU and runtime mode
by Harald Welte
· 7 years ago
8196e4d
remove old python userspace code
by Harald Welte
· 8 years ago
601e0d3
update + split README into general and firmware-specific part
by Harald Welte
· 8 years ago
3d4869c
add missing usbstring.c
by Harald Welte
· 8 years ago
353330d
qmod: Fix polarity of SPDT switch
by Harald Welte
· 8 years ago
3bbaba0
DFU: Disable LED blinking code
by Harald Welte
· 8 years ago
e8869fb
DFU: Resolve DFU runtime descriptor dynamically from descriptors
by Harald Welte
· 8 years ago
5b108d8
DFU: initialize g_dfu during real power up
by Harald Welte
· 8 years ago
96065ca
add simtrace2-list to .gitignore
by Harald Welte
· 8 years ago
1892fc1
add udev rules for all (currently) supported devices
by Harald Welte
· 8 years ago
822d66e
simtrace2-remsim: Improve support for many interfaces + devices
by Harald Welte
· 8 years ago
62bfd8a
simtrace2-remsim: Document and add longopts for UDP forwarding
by Harald Welte
· 8 years ago
b170ea9
host: fix some compiler warnings (now that we have -Wall)
by Harald Welte
· 8 years ago
dea64cb
host: Add "-Wall -g" CFLAGS to get compiler warnings
by Harald Welte
· 8 years ago
2ba03bb
simtrace2-remsim: Move away from global variables
by Harald Welte
· 8 years ago
abba8a8
LED: Introduce LED blinking pattern code
by Harald Welte
· 8 years ago
054216d
usb: Use different SubClass values for card-emulation and sniffer
by Harald Welte
· 8 years ago
eab7e45
USB: Don't specify Class/Subclass 0xff at device level
by Harald Welte
· 8 years ago
495a67d
usb: consistently use named structure initializers
by Harald Welte
· 8 years ago
912b183
qmod: Use different Interface Strings for Modem1+2 / Modem 3+4
by Harald Welte
· 8 years ago
809e584
qmod: Add code to switch between physical and virtual SIM
by Harald Welte
· 8 years ago
0a8306e
add gnumeric spreadsheet with GPIO/Pin assignments of all boards
by Harald Welte
· 8 years ago
2bff7cd
tc_etu: Don't confiugre unused TIOA pin of TC0 + TC2
by Harald Welte
· 8 years ago
705e899
qmod: (re)activate USB port remapping.
by Harald Welte
· 8 years ago
0e29598
qmod: Replace hand-crafted delay loop with call to mdelay()
by Harald Welte
· 8 years ago
c6e482d
qmod eeprom/i2c: Re-start watchdog while slow bit-banging
by Harald Welte
· 8 years ago
1776997
remove old 'notes' file with german textaul notes
by Harald Welte
· 8 years ago
596e666
fix symlink that caused host programs to not build
by Harald Welte
· 8 years ago
2363fa0
Generate USB Strings from apps/*/usb_strings.txt files at compile time
by Harald Welte
· 8 years ago
1405100
DFU: Introduce board/app-specific override for booting in DFU mode
by Harald Welte
· 8 years ago
7214b47
Make sure to print CPU Reset Cause when starting the software
by Harald Welte
· 8 years ago
45ebe45
Enable Watchdog (500ms)
by Harald Welte
· 8 years ago
aaba4af
Use Supply Controller to avoid running SAM3 on voltages lower than 3.0V
by Harald Welte
· 8 years ago
3ecbf67
only simtrace is bus-powered, SAM3 on qmod + owhw are self-powered
by Harald Welte
· 8 years ago
8adf0ac
DFU app: call into board_main_top() for qmod related initialization
by Harald Welte
· 8 years ago
f415d71
Call USBD_Disconnect before software-triggered CPU reset
by Harald Welte
· 8 years ago
ec0837c
change from \r\n (CRLF) to \n\r (LFCR)
by Harald Welte
· 8 years ago
0de99cd
DFU: String descriptors for DFU alt-interfaces
by Harald Welte
· 8 years ago
0.2
ac4f66e
DFU: Set 10ms bwPollTimeout (lowest possible as per spec)
by Harald Welte
· 8 years ago
91fc402
DFU: make sure to properly initialize g_dfu pointer before using it
by Harald Welte
· 8 years ago
b04f4f0
DFU Runtime: Add missing return after handling USB standard requests
by Harald Welte
· 8 years ago
e8eea29
dfu: fix cosmetic issue in debug message
by Harald Welte
· 8 years ago
d1e9634
DFU: fix transitions between runtime and DFU mode
by Harald Welte
· 8 years ago
db17e83
cstartup: (re-)enable interrupts before calling main()
by Harald Welte
· 8 years ago
ec9b5ff
dfu/main.c: Initialize FLASHD driver before using it
by Harald Welte
· 8 years ago
0af4948
cstartup / USBD: Use correct Makefile conditionals for DFU
by Harald Welte
· 8 years ago
adbe72a
Makefile: Define APPLICATION_foo BOARD_bar and ENVIRONMENT_baz #defines
by Harald Welte
· 8 years ago
e36970c
dfu: print Chip ID during boot
by Harald Welte
· 8 years ago
cab6641
flashd: Set 6 Wait states as per Errata requiremens for Revision A
by Harald Welte
· 8 years ago
479e97e
DFU: Add missing 'return' after handling generic USB control request
by Harald Welte
· 8 years ago
203abf5
dfu_desc: Add some string descriptors and fix configuration desc table
by Harald Welte
· 8 years ago
ee9ebb3
stdio: Increase max string size to 512 and don't endless-loop!!
by Harald Welte
· 8 years ago
b2ad7f7
dfu_des.c: Cosmetic changes, use named initializers
by Harald Welte
· 8 years ago
0395bd1
move PLLB (for USB) initialization to board_lowlevel.c
by Harald Welte
· 8 years ago
c430ac1
have local stdio.h file to avoid newlib issues
by Harald Welte
· 8 years ago
adba0ce
fix g_dfu access from both DFU and runtime access
by Harald Welte
· 8 years ago
65cca7c
ensure g_dfu is linked to start of RAM when building DFU loader
by Harald Welte
· 8 years ago
db30727
remove obsolete old linker script
by Harald Welte
· 8 years ago
32852bc
DFU: towards a more complete implementation
by Harald Welte
· 8 years ago
edf9c9d
Makefile: Optimize for size
by Harald Welte
· 8 years ago
37b6e41
move last few files from src_board / include_board
by Harald Welte
· 8 years ago
964f509
remove pio_capture, we don't use it
by Harald Welte
· 8 years ago
96e62a4
stdio.c: fix compiler warning
by Harald Welte
· 8 years ago
045ea3e
timer.h: Fix compiler warnings about redefinition
by Harald Welte
· 8 years ago
d09829d
Remove newlib dependency, include own stdio/string/assert
by Harald Welte
· 8 years ago
d525231
fix some compiler warnings
by Harald Welte
· 8 years ago
d8a003d
Structure build system to build for multiple boards/apps/environments
by Harald Welte
· 8 years ago
a1cd0f3
fix compilation of card_emu_tests
by Harald Welte
· 8 years ago
3f5e3dd
Change directory structure to align with Atmel softpack
by Harald Welte
· 8 years ago
7ed6f3b
WIP: Introduce USB DFU code from my at91lib DFU port
by Harald Welte
· 8 years ago
aa3b867
WIP: split main from board-speciic parts
by Harald Welte
· 8 years ago
a05ccc9
build efc.o and flashd.o as part of build process
by Harald Welte
· 8 years ago
Next »