Gitiles
Code Review Sign In
gerrit.osmocom.org / simtrace2 / refs/heads/laforge/tool
commiteb8fbc0296de753c6eb61b8bafcb26dd90458483[log] [tgz]
authorHarald Welte <laforge@osmocom.org>Thu Jan 09 20:31:06 2020 +0100
committerHarald Welte <laforge@osmocom.org>Sun Jun 06 11:46:50 2021 +0200
tree4c2508848ae2c1fb40dfa921d9f2f4fcd713cb73
parent9292d22726387dba024c2b0c9d76498546f291a1 [diff]
fw/qmod: enable modem RESET by default at boot

When the uC firmware starts, assert the (high-active) _RESET GPIOs,
which will cause the transistors to drive the mPCIe slot !PERST
low.

There is of course a short instance of time between the uC reset
until it executes wwan_perst_init(). To avoid this, a hardware
pull-up would have to be re-worked onto the _RESET[1..4] signals
on the PCBA

Change-Id: I8742fefa4bf02e728e34d5d8cbc0fda771e78ffb
1 file changed
tree: 4c2508848ae2c1fb40dfa921d9f2f4fcd713cb73
  1. contrib/
  2. debian/
  3. firmware/
  4. hardware/
  5. host/
  6. .gitignore
  7. .gitmodules
  8. clk_calc.py
  9. git-version-gen
  10. Makefile
  11. README.md
  12. TODO-RELEASE
README.md

SIMtrace v2.0

This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.

NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.

Supported Hardware

  • Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
  • sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
  • sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported

This Repository

This repository contains several directory

  • firmware - the firmware to run on the actual devices
  • hardware - some information related to the hardware
  • host - Programs to use on the USB host to interface with the hardware

The host software includes

  • libosmo-simtrace2 - a shared library to talk to devices running the simtrace2 firmware
  • simtrace2-list - list any USB-attached devices running simtrace2 firmware
  • simtrace2-sniff - interface the 'trace' firmware to obtain card protocol traces
  • simtrace2-cardem-pcsc - interface the 'cardem' fimrware to use a SIM in a PC/SC reader