move UART defines to board.h
diff --git a/sam3s_example/include/board.h b/sam3s_example/include/board.h
index e91e1fe..d67a1cd 100644
--- a/sam3s_example/include/board.h
+++ b/sam3s_example/include/board.h
@@ -1,10 +1,22 @@
#ifndef _BOARD_
#define _BOARD_
+/** Headers */
#include "chip.h"
-#include "pio.h"
-#include "syscalls.h" /** RedHat Newlib minimal stub */
-#include "SAM3S.h"
+
+/** Board */
+#include "board_lowlevel.h"
+#include "uart_console.h"
+#include "iso7816_4.h"
+
+/** Highlevel */
+#include "trace.h"
+#include "stdio.h"
+#include "string.h"
+
+#ifdef __GNUC__
+#undef __GNUC__
+#endif
/** Name of the board */
#define BOARD_NAME "SAM3S-SIMTRACE"
@@ -34,4 +46,28 @@
#define PINS_UART { PIO_PA9A_URXD0|PIO_PA10A_UTXD0, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+/** UART0 */
+/** Console baudrate always using 115200. */
+#define CONSOLE_BAUDRATE 115200
+/** Usart Hw interface used by the console (UART0). */
+#define CONSOLE_USART UART0
+/** Usart Hw ID used by the console (UART0). */
+#define CONSOLE_ID ID_UART0
+/** Pins description corresponding to Rxd,Txd, (UART pins) */
+#define CONSOLE_PINS {PINS_UART}
+
+
+/// Smartcard detection pin
+// FIXME: add connect pin as iso pin
+#define SMARTCARD_CONNECT_PIN {1 << 8, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT}
+
+/// PIN used for reset the smartcard
+#define PIN_SIM_IO {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+#define PIN_SIM_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
+
+#define PIN_ISO7816_RSTMC {1 << 7, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
+/// Pins used for connect the smartcard
+//#define PINS_ISO7816 PIN_USART1_TXD, PIN_USART1_SCK, PIN_ISO7816_RSTMC
+#define PINS_ISO7816 PIN_SIM_IO, PIN_SIM_CLK, PIN_ISO7816_RSTMC
+
#endif