host: Don't pass -1 (converted to 255) as address

We initialize a local variable to -1, and if the user specifies
no address from the command line, we use this in the interface match
struct, which uses a uint8_t.  This means 255 ends up in there, and
as a result no usb interface ever matches unless the user explicitly
specifies the -A command line argument.

With this patch any absent -A argument will result in ifm.addr == 0,
which means "don't match on address", and which is what we want here.

Change-Id: Iffb5fa406ddef00c7c15570ffca2c109b98d7a2d
2 files changed
tree: c1bb6cac84a6a4ee7b32b276ad0c5265849341ee
  1. contrib/
  2. debian/
  3. firmware/
  4. hardware/
  5. host/
  6. .clang-format
  7. .gitignore
  8. .gitmodules
  9. .gitreview
  10. clk_calc.py
  11. git-version-gen
  12. Makefile
  13. README.md
  14. TODO-RELEASE
README.md

SIMtrace v2.0

This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.

NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.

Supported Hardware

  • Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
  • sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
  • sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported

This Repository

This repository contains several directory

  • firmware - the firmware to run on the actual devices
  • hardware - some information related to the hardware
  • host - Programs to use on the USB host to interface with the hardware

The host software includes

  • libosmo-simtrace2 - a shared library to talk to devices running the simtrace2 firmware
  • simtrace2-list - list any USB-attached devices running simtrace2 firmware
  • simtrace2-sniff - interface the 'trace' firmware to obtain card protocol traces
  • simtrace2-cardem-pcsc - interface the 'cardem' fimrware to use a SIM in a PC/SC reader