commit | bc62335768ec7d786c811dc7b6575f795fc02d6d | [log] [tgz] |
---|---|---|
author | Harald Welte <laforge@gnumonks.org> | Wed Jun 19 20:35:37 2019 +0200 |
committer | Harald Welte <laforge@gnumonks.org> | Wed Jun 19 20:35:37 2019 +0200 |
tree | 6a99fad60da4aefb4554d83e523b49efa968c872 | |
parent | 63490361d2ad9f929a75ace8899505663ed870e8 [diff] |
qmod: Disable hub reset and EEPROM erase/write by default We recently introduced ALLOW_PEER_ERASE to control if the firmware should contain code for the SAM3 to reset each other on QMOD. Let's use the same define to also remove code for putting the USB hub into reset as well as code for erasing + writing the hub EEPROM. This is needed only during production, but it shouldn't be enabled during normal operation of the product at the end user. Change-Id: I1c8cca2f7f0f0070d7bf1ade676e035c45e4d5ab
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
This is under heavy development, and right now it is not surprising if things still break on a daily basis.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.
The goal is to support the following devices:
This repository contains several directory