initial
diff --git a/sam3s_example/Makefile b/sam3s_example/Makefile
new file mode 100644
index 0000000..ecd0b71
--- /dev/null
+++ b/sam3s_example/Makefile
@@ -0,0 +1,171 @@
+# ----------------------------------------------------------------------------
+# ATMEL Microcontroller Software Support
+# ----------------------------------------------------------------------------
+# Copyright (c) 2010, Atmel Corporation
+#
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# - Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the disclaimer below.
+#
+# Atmel's name may not be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+# OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# ----------------------------------------------------------------------------
+
+# Makefile for compiling the Getting Started with SAM3S Microcontrollers project
+
+#-------------------------------------------------------------------------------
+# User-modifiable options
+#-------------------------------------------------------------------------------
+
+# Chip & board used for compilation
+# (can be overriden by adding CHIP=chip and BOARD=board to the command-line)
+CHIP = sam3s2
+BOARD = simtrace
+
+# Defines which are the available memory targets for the SAM3S-EK board.
+MEMORIES = flash
+
+# Trace level used for compilation
+# (can be overriden by adding TRACE_LEVEL=#number to the command-line)
+# TRACE_LEVEL_DEBUG 5
+# TRACE_LEVEL_INFO 4
+# TRACE_LEVEL_WARNING 3
+# TRACE_LEVEL_ERROR 2
+# TRACE_LEVEL_FATAL 1
+# TRACE_LEVEL_NO_TRACE 0
+TRACE_LEVEL = 4
+
+# Optimization level, put in comment for debugging
+OPTIMIZATION = -O0
+
+# Output file basename
+OUTPUT = project
+
+# Output directories
+BIN = bin
+OBJ = obj
+
+#-------------------------------------------------------------------------------
+# Tools
+#-------------------------------------------------------------------------------
+
+# Tool suffix when cross-compiling
+CROSS_COMPILE = arm-none-eabi-
+
+LIBS = -Wl,--start-group -lgcc -lc -Wl,--end-group
+#LIB_PATH+=-L=/lib/thumb2
+#LIB_PATH+=-L=/../lib/gcc/arm-none-eabi/4.4.1/thumb2
+
+# Compilation tools
+CC = $(CROSS_COMPILE)gcc
+LD = $(CROSS_COMPILE)ld
+SIZE = $(CROSS_COMPILE)size
+STRIP = $(CROSS_COMPILE)strip
+OBJCOPY = $(CROSS_COMPILE)objcopy
+GDB = $(CROSS_COMPILE)gdb
+NM = $(CROSS_COMPILE)nm
+
+# Flags
+INCLUDES = -Iinclude
+INCLUDES += -Icmsis
+#INCLUDES += -I$(LIBRARIES)
+
+CFLAGS += -Wall -Wchar-subscripts -Wcomment -Wformat=2 -Wimplicit-int
+CFLAGS += -Werror-implicit-function-declaration -Wmain -Wparentheses
+CFLAGS += -Wsequence-point -Wreturn-type -Wswitch -Wtrigraphs -Wunused
+CFLAGS += -Wuninitialized -Wunknown-pragmas -Wfloat-equal -Wundef
+CFLAGS += -Wshadow -Wpointer-arith -Wbad-function-cast -Wwrite-strings
+CFLAGS += -Wsign-compare -Waggregate-return
+CFLAGS += -Wformat -Wmissing-format-attribute -Wno-deprecated-declarations
+CFLAGS += -Wpacked -Wredundant-decls -Wnested-externs -Winline -Wlong-long
+CFLAGS += -Wunreachable-code
+CFLAGS += -Wcast-align
+#CFLAGS += -Wmissing-noreturn
+#CFLAGS += -Wconversion
+
+# To reduce application size use only integer printf function.
+CFLAGS += -Dprintf=iprintf
+
+# -mlong-calls -Wall
+#CFLAGS += -save-temps -fverbose-asm
+#CFLAGS += -Wa,-a,-ad
+CFLAGS += --param max-inline-insns-single=500 -mcpu=cortex-m3 -mthumb # -mfix-cortex-m3-ldrd
+CFLAGS += -ffunction-sections -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -DTRACE_LEVEL=$(TRACE_LEVEL)
+ASFLAGS = -mcpu=cortex-m3 -mthumb -Wall -g $(OPTIMIZATION) $(INCLUDES) -D$(CHIP) -D__ASSEMBLY__
+LDFLAGS = -mcpu=cortex-m3 -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=ResetException -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--warn-unresolved-symbols
+#LD_OPTIONAL=-Wl,--print-gc-sections -Wl,--stats
+
+#-------------------------------------------------------------------------------
+# Files
+#-------------------------------------------------------------------------------
+
+# Directories where source files can be found
+
+VPATH += src cmsis
+
+# Objects built from C source files
+C_CMSIS = core_cm3.o
+C_LOWLEVEL = board_cstartup_gnu.o board_lowlevel.o syscalls.o exceptions.o
+C_LIBLEVEL = spi.o pio.o pmc.o
+C_APPLEVEL = main.o
+C_OBJECTS = $(C_CMSIS) $(C_LOWLEVEL) $(C_LIBLEVEL) $(C_APPLEVEL)
+
+# Append OBJ and BIN directories to output filename
+OUTPUT := $(BIN)/$(OUTPUT)
+
+#-------------------------------------------------------------------------------
+# Rules
+#-------------------------------------------------------------------------------
+
+all: $(BIN) $(OBJ) $(MEMORIES)
+
+$(BIN) $(OBJ):
+ mkdir $@
+
+define RULES
+C_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(C_OBJECTS))
+ASM_OBJECTS_$(1) = $(addprefix $(OBJ)/$(1)_, $(ASM_OBJECTS))
+
+$(1): $$(ASM_OBJECTS_$(1)) $$(C_OBJECTS_$(1))
+ @$(CC) $(LDFLAGS) $(LD_OPTIONAL) -T"$$@.ld" -Wl,-Map,$(OUTPUT)-$$@.map -o $(OUTPUT)-$$@.elf $$^ $(LIBS)
+ $(NM) $(OUTPUT)-$$@.elf >$(OUTPUT)-$$@.elf.txt
+ $(OBJCOPY) -O binary $(OUTPUT)-$$@.elf $(OUTPUT)-$$@.bin
+ $(SIZE) $$^ $(OUTPUT)-$$@.elf
+
+$$(C_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.c Makefile $(OBJ) $(BIN)
+ @echo [COMPILING $$@]
+ @$(CC) $(CFLAGS) -D$(1) -Wa,-ahlms=$(BIN)/$$*.lst -c -o $$@ $$<
+
+$$(ASM_OBJECTS_$(1)): $(OBJ)/$(1)_%.o: %.S Makefile $(OBJ) $(BIN)
+ @echo [ASSEMBLING $$@]
+ @$(CC) $(ASFLAGS) -D$(1) -c -o $$@ $$<
+
+debug_$(1): $(1)
+ $(GDB) -x "$(BOARD_LIB)/resources/gcc/$(BOARD)_$(1).gdb" -ex "reset" -readnow -se $(OUTPUT)-$(1).elf
+endef
+
+$(foreach MEMORY, $(MEMORIES), $(eval $(call RULES,$(MEMORY))))
+
+program:
+ openocd -f /home/chrysh/ba_thesis/thesis/openocd/openocd.cfg -c "init" -c "halt" -c "flash write_bank 0 /home/chrysh/ba_thesis/thesis/src/sam3s_example/bin/project-flash.bin 0" -c "reset" -c "shutdown"
+
+clean:
+ -rm -fR $(OBJ)/*.o $(BIN)/*.bin $(BIN)/*.elf $(BIN)/*.elf.txt $(BIN)/*.map $(BIN)/*.lst
+
+rmbak:
+ -rm *~ $(BIN)/*~
diff --git a/sam3s_example/blink.c b/sam3s_example/blink.c
new file mode 100644
index 0000000..d5bf27d
--- /dev/null
+++ b/sam3s_example/blink.c
@@ -0,0 +1,22 @@
+// Xtal: Default internal 4MHz
+#include <SAM3S2B.h>
+//#include <SAM3S.h>
+
+int main () {
+ int i,j;
+ //i=1000;
+ //j=10000;
+ PMC->PMC_WPMR = 0x504D4300;// Disable write protect
+ PMC->PMC_PCER0 = (1<<11);// Enable PIO clock
+ PIOA->PIO_PER = (1<<19); //Enable PIO
+ PIOA->PIO_OER = (1<<19); //Enable Output
+
+ while (1) {
+ PIOA->PIO_CODR = (1<<18);// Turn LED on
+ for (i=1;i<1000;i++) // Waiting
+ for (j=1;j<3000;j++);
+ PIOA->PIO_SODR = (1<<18);// Turn LED off
+ for (i=1;i<1000;i++) // Waiting
+ for (j=1;j<2000;j++);
+ }
+}
diff --git a/sam3s_example/cmsis/core_cm3.c b/sam3s_example/cmsis/core_cm3.c
new file mode 100644
index 0000000..46ca332
--- /dev/null
+++ b/sam3s_example/cmsis/core_cm3.c
@@ -0,0 +1,817 @@
+/**************************************************************************//**
+ * @file core_cm3.c
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File
+ * @version V1.30
+ * @date 30. October 2009
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+/*
+ * Remo Giermann:
+ * 2012/01/09 - fixed __STREX[BHW] functions
+ *
+ *
+ */
+
+#include <stdint.h>
+
+/* define compiler specific symbols */
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+
+#endif
+
+uint32_t __get_PSP(void) ;
+void __set_PSP(uint32_t topOfProcStack) ;
+uint32_t __get_MSP(void) ;
+void __set_MSP(uint32_t mainStackPointer) ;
+uint32_t __REV16(uint16_t value) ;
+int32_t __REVSH(int16_t value) ;
+uint32_t __RBIT(uint32_t value) ;
+uint8_t __LDREXB(uint8_t *addr) ;
+uint16_t __LDREXH(uint16_t *addr) ;
+uint32_t __LDREXW(uint32_t *addr) ;
+uint32_t __STREXB(uint8_t value, uint8_t *addr) ;
+uint32_t __STREXH(uint16_t value, uint16_t *addr) ;
+uint32_t __STREXW(uint32_t value, uint32_t *addr) ;
+
+uint32_t __get_BASEPRI(void) ;
+void __set_BASEPRI(uint32_t basePri) ;
+uint32_t __get_PRIMASK(void) ;
+void __set_PRIMASK(uint32_t priMask) ;
+uint32_t __get_FAULTMASK(void) ;
+void __set_FAULTMASK(uint32_t faultMask) ;
+uint32_t __get_CONTROL(void) ;
+void __set_CONTROL(uint32_t control) ;
+uint32_t __REV(uint32_t value) ;
+
+/* ################### Compiler specific Intrinsics ########################### */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+__ASM uint32_t __get_PSP(void)
+{
+ mrs r0, psp
+ bx lr
+}
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+__ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ msr psp, r0
+ bx lr
+}
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+__ASM uint32_t __get_MSP(void)
+{
+ mrs r0, msp
+ bx lr
+}
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+__ASM void __set_MSP(uint32_t mainStackPointer)
+{
+ msr msp, r0
+ bx lr
+}
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+__ASM uint32_t __REV16(uint16_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+
+/**
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+__ASM int32_t __REVSH(int16_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+
+
+#if (__ARMCC_VERSION < 400000)
+
+/**
+ * @brief Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+__ASM void __CLREX(void)
+{
+ clrex
+}
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+__ASM uint32_t __get_BASEPRI(void)
+{
+ mrs r0, basepri
+ bx lr
+}
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+__ASM void __set_BASEPRI(uint32_t basePri)
+{
+ msr basepri, r0
+ bx lr
+}
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+__ASM uint32_t __get_PRIMASK(void)
+{
+ mrs r0, primask
+ bx lr
+}
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+__ASM void __set_PRIMASK(uint32_t priMask)
+{
+ msr primask, r0
+ bx lr
+}
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+__ASM uint32_t __get_FAULTMASK(void)
+{
+ mrs r0, faultmask
+ bx lr
+}
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+__ASM void __set_FAULTMASK(uint32_t faultMask)
+{
+ msr faultmask, r0
+ bx lr
+}
+
+/**
+ * @brief Return the Control Register value
+ *
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+__ASM uint32_t __get_CONTROL(void)
+{
+ mrs r0, control
+ bx lr
+}
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+__ASM void __set_CONTROL(uint32_t control)
+{
+ msr control, r0
+ bx lr
+}
+
+#endif /* __ARMCC_VERSION */
+
+
+
+#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#pragma diag_suppress=Pe940
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+uint32_t __get_PSP(void)
+{
+ __ASM("mrs r0, psp");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM("msr psp, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+uint32_t __get_MSP(void)
+{
+ __ASM("mrs r0, msp");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM("msr msp, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+uint32_t __REV16(uint16_t value)
+{
+ __ASM("rev16 r0, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse bit order of value
+ */
+uint32_t __RBIT(uint32_t value)
+{
+ __ASM("rbit r0, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief LDR Exclusive (8 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 8 bit values)
+ */
+uint8_t __LDREXB(uint8_t *addr)
+{
+ __ASM("ldrexb r0, [r0]");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief LDR Exclusive (16 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+uint16_t __LDREXH(uint16_t *addr)
+{
+ __ASM("ldrexh r0, [r0]");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief LDR Exclusive (32 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+uint32_t __LDREXW(uint32_t *addr)
+{
+ __ASM("ldrex r0, [r0]");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief STR Exclusive (8 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+uint32_t __STREXB(uint8_t value, uint8_t *addr)
+{
+ __ASM("strexb r2, r0, [r1]");
+ __ASM("mov r2, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief STR Exclusive (16 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+uint32_t __STREXH(uint16_t value, uint16_t *addr)
+{
+ __ASM("strexh r2, r0, [r1]");
+ __ASM("mov r2, r0");
+ __ASM("bx lr");
+}
+
+/**
+ * @brief STR Exclusive (32 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+uint32_t __STREXW(uint32_t value, uint32_t *addr)
+{
+ __ASM("strex r2, r0, [r1]");
+ __ASM("mov r2, r0");
+ __ASM("bx lr");
+}
+
+#pragma diag_default=Pe940
+
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+/*extern uint32_t __get_PSP(void) __attribute__( ( naked ) ); */
+uint32_t __get_PSP(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, psp\n\t"
+ "MOV r0, %0 \n\t"
+ "BX lr \n\t" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+/*void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) ); */
+void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n\t"
+ "BX lr \n\t" : : "r" (topOfProcStack) );
+}
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+/*uint32_t __get_MSP(void) __attribute__( ( naked ) ); */
+uint32_t __get_MSP(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, msp\n\t"
+ "MOV r0, %0 \n\t"
+ "BX lr \n\t" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+/*void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) ); */
+void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n\t"
+ "BX lr \n\t" : : "r" (topOfMainStack) );
+}
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+uint32_t __get_BASEPRI(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) );
+}
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+uint32_t __get_PRIMASK(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) );
+}
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) );
+}
+
+/**
+ * @brief Return the Control Register value
+*
+* @return Control value
+ *
+ * Return the content of the control register
+ */
+uint32_t __get_CONTROL(void)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) );
+}
+
+
+/**
+ * @brief Reverse byte order in integer value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in integer value
+ */
+uint32_t __REV(uint32_t value)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+uint32_t __REV16(uint16_t value)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+int32_t __REVSH(int16_t value)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse bit order of value
+ */
+uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief LDR Exclusive (8 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 8 bit value
+ */
+uint8_t __LDREXB(uint8_t *addr)
+{
+ uint8_t result=0;
+
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) );
+ return(result);
+}
+
+/**
+ * @brief LDR Exclusive (16 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+uint16_t __LDREXH(uint16_t *addr)
+{
+ uint16_t result=0;
+
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) );
+ return(result);
+}
+
+/**
+ * @brief LDR Exclusive (32 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+uint32_t __LDREXW(uint32_t *addr)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) );
+ return(result);
+}
+
+/**
+ * @brief STR Exclusive (8 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+uint32_t __STREXB(uint8_t value, uint8_t *addr)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("strexb %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief STR Exclusive (16 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+uint32_t __STREXH(uint16_t value, uint16_t *addr)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("strexh %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) );
+ return(result);
+}
+
+/**
+ * @brief STR Exclusive (32 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+uint32_t __STREXW(uint32_t value, uint32_t *addr)
+{
+ uint32_t result=0;
+
+ __ASM volatile ("strex %0, %2, [%1]" : "=&r" (result) : "r" (addr), "r" (value) );
+ return(result);
+}
+
+
+#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
diff --git a/sam3s_example/cmsis/core_cm3.h b/sam3s_example/cmsis/core_cm3.h
new file mode 100644
index 0000000..1c07eff
--- /dev/null
+++ b/sam3s_example/cmsis/core_cm3.h
@@ -0,0 +1,1818 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V1.30
+ * @date 30. October 2009
+ *
+ * @note
+ * Copyright (C) 2009 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+#ifndef __CM3_CORE_H__
+#define __CM3_CORE_H__
+
+/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration
+ *
+ * List of Lint messages which will be suppressed and not shown:
+ * - Error 10: \n
+ * register uint32_t __regBasePri __asm("basepri"); \n
+ * Error 10: Expecting ';'
+ * .
+ * - Error 530: \n
+ * return(__regBasePri); \n
+ * Warning 530: Symbol '__regBasePri' (line 264) not initialized
+ * .
+ * - Error 550: \n
+ * __regBasePri = (basePri & 0x1ff); \n
+ * Warning 550: Symbol '__regBasePri' (line 271) not accessed
+ * .
+ * - Error 754: \n
+ * uint32_t RESERVED0[24]; \n
+ * Info 754: local structure member '<some, not used in the HAL>' (line 109, file ./cm3_core.h) not referenced
+ * .
+ * - Error 750: \n
+ * #define __CM3_CORE_H__ \n
+ * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced
+ * .
+ * - Error 528: \n
+ * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n
+ * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced
+ * .
+ * - Error 751: \n
+ * } InterruptType_Type; \n
+ * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced
+ * .
+ * Note: To re-enable a Message, insert a space before 'lint' *
+ *
+ */
+
+/*lint -save */
+/*lint -e10 */
+/*lint -e530 */
+/*lint -e550 */
+/*lint -e754 */
+/*lint -e750 */
+/*lint -e528 */
+/*lint -e751 */
+
+
+/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions
+ This file defines all structures and symbols for CMSIS core:
+ - CMSIS version number
+ - Cortex-M core registers and bitfields
+ - Cortex-M core peripheral base address
+ @{
+ */
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex core */
+
+#include <stdint.h> /* Include standard types */
+
+#if defined (__ICCARM__)
+ #include <intrinsics.h> /* IAR Intrinsics */
+#endif
+
+
+#ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */
+#endif
+
+
+
+
+/**
+ * IO definitions
+ *
+ * define access restrictions to peripheral registers
+ */
+
+#ifdef __cplusplus
+ #define __I volatile /*!< defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< defines 'read only' permissions */
+#endif
+#define __O volatile /*!< defines 'write only' permissions */
+#define __IO volatile /*!< defines 'read / write' permissions */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register
+ @{
+*/
+
+
+/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC
+ memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
+ @{
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */
+} NVIC_Type;
+/*@}*/ /* end of group CMSIS_CM3_NVIC */
+
+
+/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB
+ memory mapped structure for System Control Block (SCB)
+ @{
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (0x1ul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+/*@}*/ /* end of group CMSIS_CM3_SCB */
+
+
+/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
+ memory mapped structure for SysTick
+ @{
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+/*@}*/ /* end of group CMSIS_CM3_SysTick */
+
+
+/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM
+ memory mapped structure for Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */
+ __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */
+ __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+/*@}*/ /* end of group CMSIS_CM3_ITM */
+
+
+/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type
+ memory mapped structure for Interrupt Type
+ @{
+ */
+typedef struct
+{
+ uint32_t RESERVED0;
+ __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */
+#else
+ uint32_t RESERVED1;
+#endif
+} InterruptType_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */
+#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */
+#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */
+
+#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */
+#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */
+
+#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */
+#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */
+/*@}*/ /* end of group CMSIS_CM3_InterruptType */
+
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
+/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU
+ memory mapped structure for Memory Protection Unit (MPU)
+ @{
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */
+#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */
+#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */
+#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */
+#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */
+#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */
+#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@}*/ /* end of group CMSIS_CM3_MPU */
+#endif
+
+
+/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug
+ memory mapped structure for Core Debug Register
+ @{
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+/*@}*/ /* end of group CMSIS_CM3_CoreDebug */
+
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000) /*!< ITM Base Address */
+#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */
+
+#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */
+#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */
+#endif
+
+/*@}*/ /* end of group CMSIS_CM3_core_register */
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+
+#endif
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#define __enable_fault_irq __enable_fiq
+#define __disable_fault_irq __disable_fiq
+
+#define __NOP __nop
+#define __WFI __wfi
+#define __WFE __wfe
+#define __SEV __sev
+#define __ISB() __isb(0)
+#define __DSB() __dsb(0)
+#define __DMB() __dmb(0)
+#define __REV __rev
+#define __RBIT __rbit
+#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr))
+#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr))
+#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr))
+#define __STREXB(value, ptr) __strex(value, ptr)
+#define __STREXH(value, ptr) __strex(value, ptr)
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */
+/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+extern int32_t __REVSH(int16_t value);
+
+
+#if (__ARMCC_VERSION < 400000)
+
+/**
+ * @brief Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+extern void __CLREX(void);
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+extern uint32_t __get_BASEPRI(void);
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+extern void __set_BASEPRI(uint32_t basePri);
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+extern uint32_t __get_PRIMASK(void);
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+extern void __set_PRIMASK(uint32_t priMask);
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+extern uint32_t __get_FAULTMASK(void);
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+extern void __set_FAULTMASK(uint32_t faultMask);
+
+/**
+ * @brief Return the Control Register value
+ *
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+extern uint32_t __get_CONTROL(void);
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+extern void __set_CONTROL(uint32_t control);
+
+#else /* (__ARMCC_VERSION >= 400000) */
+
+/**
+ * @brief Remove the exclusive lock created by ldrex
+ *
+ * Removes the exclusive lock which is created by ldrex.
+ */
+#define __CLREX __clrex
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+static __INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+static __INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+static __INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+static __INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+static __INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+static __INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & 1);
+}
+
+/**
+ * @brief Return the Control Register value
+ *
+ * @return Control value
+ *
+ * Return the content of the control register
+ */
+static __INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+static __INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+#endif /* __ARMCC_VERSION */
+
+
+
+#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#define __enable_irq __enable_interrupt /*!< global Interrupt enable */
+#define __disable_irq __disable_interrupt /*!< global Interrupt disable */
+
+static __INLINE void __enable_fault_irq( void ) { __ASM ("cpsie f"); }
+static __INLINE void __disable_fault_irq( void ) { __ASM ("cpsid f"); }
+
+#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */
+static __INLINE void __WFI( void ) { __ASM ("wfi"); }
+static __INLINE void __WFE( void ) { __ASM ("wfe"); }
+static __INLINE void __SEV( void ) { __ASM ("sev"); }
+static __INLINE void __CLREX( void ) { __ASM ("clrex"); }
+
+/* intrinsic void __ISB(void) */
+/* intrinsic void __DSB(void) */
+/* intrinsic void __DMB(void) */
+/* intrinsic void __set_PRIMASK(); */
+/* intrinsic void __get_PRIMASK(); */
+/* intrinsic void __set_FAULTMASK(); */
+/* intrinsic void __get_FAULTMASK(); */
+/* intrinsic uint32_t __REV(uint32_t value); */
+/* intrinsic uint32_t __REVSH(uint32_t value); */
+/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */
+/* intrinsic unsigned long __LDREX(unsigned long *); */
+
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse bit order of value
+ */
+extern uint32_t __RBIT(uint32_t value);
+
+/**
+ * @brief LDR Exclusive (8 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 8 bit values)
+ */
+extern uint8_t __LDREXB(uint8_t *addr);
+
+/**
+ * @brief LDR Exclusive (16 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+extern uint16_t __LDREXH(uint16_t *addr);
+
+/**
+ * @brief LDR Exclusive (32 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+extern uint32_t __LDREXW(uint32_t *addr);
+
+/**
+ * @brief STR Exclusive (8 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
+
+/**
+ * @brief STR Exclusive (16 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
+
+/**
+ * @brief STR Exclusive (32 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
+
+
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+static __INLINE void __enable_irq(void) { __ASM volatile ("cpsie i"); }
+static __INLINE void __disable_irq(void) { __ASM volatile ("cpsid i"); }
+
+static __INLINE void __enable_fault_irq(void) { __ASM volatile ("cpsie f"); }
+static __INLINE void __disable_fault_irq(void) { __ASM volatile ("cpsid f"); }
+
+static __INLINE void __NOP(void) { __ASM volatile ("nop"); }
+static __INLINE void __WFI(void) { __ASM volatile ("wfi"); }
+static __INLINE void __WFE(void) { __ASM volatile ("wfe"); }
+static __INLINE void __SEV(void) { __ASM volatile ("sev"); }
+static __INLINE void __ISB(void) { __ASM volatile ("isb"); }
+static __INLINE void __DSB(void) { __ASM volatile ("dsb"); }
+static __INLINE void __DMB(void) { __ASM volatile ("dmb"); }
+static __INLINE void __CLREX(void) { __ASM volatile ("clrex"); }
+
+
+/**
+ * @brief Return the Process Stack Pointer
+ *
+ * @return ProcessStackPointer
+ *
+ * Return the actual process stack pointer
+ */
+extern uint32_t __get_PSP(void);
+
+/**
+ * @brief Set the Process Stack Pointer
+ *
+ * @param topOfProcStack Process Stack Pointer
+ *
+ * Assign the value ProcessStackPointer to the MSP
+ * (process stack pointer) Cortex processor register
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/**
+ * @brief Return the Main Stack Pointer
+ *
+ * @return Main Stack Pointer
+ *
+ * Return the current value of the MSP (main stack pointer)
+ * Cortex processor register
+ */
+extern uint32_t __get_MSP(void);
+
+/**
+ * @brief Set the Main Stack Pointer
+ *
+ * @param topOfMainStack Main Stack Pointer
+ *
+ * Assign the value mainStackPointer to the MSP
+ * (main stack pointer) Cortex processor register
+ */
+extern void __set_MSP(uint32_t topOfMainStack);
+
+/**
+ * @brief Return the Base Priority value
+ *
+ * @return BasePriority
+ *
+ * Return the content of the base priority register
+ */
+extern uint32_t __get_BASEPRI(void);
+
+/**
+ * @brief Set the Base Priority value
+ *
+ * @param basePri BasePriority
+ *
+ * Set the base priority register
+ */
+extern void __set_BASEPRI(uint32_t basePri);
+
+/**
+ * @brief Return the Priority Mask value
+ *
+ * @return PriMask
+ *
+ * Return state of the priority mask bit from the priority mask register
+ */
+extern uint32_t __get_PRIMASK(void);
+
+/**
+ * @brief Set the Priority Mask value
+ *
+ * @param priMask PriMask
+ *
+ * Set the priority mask bit in the priority mask register
+ */
+extern void __set_PRIMASK(uint32_t priMask);
+
+/**
+ * @brief Return the Fault Mask value
+ *
+ * @return FaultMask
+ *
+ * Return the content of the fault mask register
+ */
+extern uint32_t __get_FAULTMASK(void);
+
+/**
+ * @brief Set the Fault Mask value
+ *
+ * @param faultMask faultMask value
+ *
+ * Set the fault mask register
+ */
+extern void __set_FAULTMASK(uint32_t faultMask);
+
+/**
+ * @brief Return the Control Register value
+*
+* @return Control value
+ *
+ * Return the content of the control register
+ */
+extern uint32_t __get_CONTROL(void);
+
+/**
+ * @brief Set the Control Register value
+ *
+ * @param control Control value
+ *
+ * Set the control register
+ */
+extern void __set_CONTROL(uint32_t control);
+
+/**
+ * @brief Reverse byte order in integer value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in integer value
+ */
+extern uint32_t __REV(uint32_t value);
+
+/**
+ * @brief Reverse byte order in unsigned short value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in unsigned short value
+ */
+extern uint32_t __REV16(uint16_t value);
+
+/**
+ * @brief Reverse byte order in signed short value with sign extension to integer
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse byte order in signed short value with sign extension to integer
+ */
+extern int32_t __REVSH(int16_t value);
+
+/**
+ * @brief Reverse bit order of value
+ *
+ * @param value value to reverse
+ * @return reversed value
+ *
+ * Reverse bit order of value
+ */
+extern uint32_t __RBIT(uint32_t value);
+
+/**
+ * @brief LDR Exclusive (8 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 8 bit value
+ */
+extern uint8_t __LDREXB(uint8_t *addr);
+
+/**
+ * @brief LDR Exclusive (16 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 16 bit values
+ */
+extern uint16_t __LDREXH(uint16_t *addr);
+
+/**
+ * @brief LDR Exclusive (32 bit)
+ *
+ * @param *addr address pointer
+ * @return value of (*address)
+ *
+ * Exclusive LDR command for 32 bit values
+ */
+extern uint32_t __LDREXW(uint32_t *addr);
+
+/**
+ * @brief STR Exclusive (8 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 8 bit values
+ */
+extern uint32_t __STREXB(uint8_t value, uint8_t *addr);
+
+/**
+ * @brief STR Exclusive (16 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 16 bit values
+ */
+extern uint32_t __STREXH(uint16_t value, uint16_t *addr);
+
+/**
+ * @brief STR Exclusive (32 bit)
+ *
+ * @param value value to store
+ * @param *addr address pointer
+ * @return successful / failed
+ *
+ * Exclusive STR command for 32 bit values
+ */
+extern uint32_t __STREXW(uint32_t value, uint32_t *addr);
+
+
+#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+
+/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface
+ Core Function Interface containing:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Reset Functions
+*/
+/*@{*/
+
+/* ########################## NVIC functions #################################### */
+
+/**
+ * @brief Set the Priority Grouping in NVIC Interrupt Controller
+ *
+ * @param PriorityGroup is priority grouping field
+ *
+ * Set the priority grouping field using the required unlock sequence.
+ * The parameter priority_grouping is assigned to the field
+ * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
+ */
+static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ (0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+/**
+ * @brief Get the Priority Grouping from NVIC Interrupt Controller
+ *
+ * @return priority grouping field
+ *
+ * Get the priority grouping from NVIC Interrupt Controller.
+ * priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
+ */
+static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+/**
+ * @brief Enable Interrupt in NVIC Interrupt Controller
+ *
+ * @param IRQn The positive number of the external interrupt to enable
+ *
+ * Enable a device specific interupt in the NVIC interrupt controller.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+/**
+ * @brief Disable the interrupt line for external interrupt specified
+ *
+ * @param IRQn The positive number of the external interrupt to disable
+ *
+ * Disable a device specific interupt in the NVIC interrupt controller.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+/**
+ * @brief Read the interrupt pending bit for a device specific interrupt source
+ *
+ * @param IRQn The number of the device specifc interrupt
+ * @return 1 = interrupt pending, 0 = interrupt not pending
+ *
+ * Read the pending register in NVIC and return 1 if its status is pending,
+ * otherwise it returns 0
+ */
+static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+/**
+ * @brief Set the pending bit for an external interrupt
+ *
+ * @param IRQn The number of the interrupt for set pending
+ *
+ * Set the pending bit for the specified interrupt.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+/**
+ * @brief Clear the pending bit for an external interrupt
+ *
+ * @param IRQn The number of the interrupt for clear pending
+ *
+ * Clear the pending bit for the specified interrupt.
+ * The interrupt number cannot be a negative value.
+ */
+static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+/**
+ * @brief Read the active bit for an external interrupt
+ *
+ * @param IRQn The number of the interrupt for read active bit
+ * @return 1 = interrupt active, 0 = interrupt not active
+ *
+ * Read the active register in NVIC and returns 1 if its status is active,
+ * otherwise it returns 0.
+ */
+static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+/**
+ * @brief Set the priority for an interrupt
+ *
+ * @param IRQn The number of the interrupt for set priority
+ * @param priority The priority to set
+ *
+ * Set the priority for the specified interrupt. The interrupt
+ * number can be positive to specify an external (device specific)
+ * interrupt, or negative to specify an internal (core) interrupt.
+ *
+ * Note: The priority cannot be set for every core interrupt.
+ */
+static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+/**
+ * @brief Read the priority for an interrupt
+ *
+ * @param IRQn The number of the interrupt for get priority
+ * @return The priority for the interrupt
+ *
+ * Read the priority for the specified interrupt. The interrupt
+ * number can be positive to specify an external (device specific)
+ * interrupt, or negative to specify an internal (core) interrupt.
+ *
+ * The returned priority value is automatically aligned to the implemented
+ * priority bits of the microcontroller.
+ *
+ * Note: The priority cannot be set for every core interrupt.
+ */
+static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/**
+ * @brief Encode the priority for an interrupt
+ *
+ * @param PriorityGroup The used priority group
+ * @param PreemptPriority The preemptive priority value (starting from 0)
+ * @param SubPriority The sub priority value (starting from 0)
+ * @return The encoded priority for the interrupt
+ *
+ * Encode the priority for an interrupt with the given priority group,
+ * preemptive priority value and sub priority value.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+ *
+ * The returned priority value can be used for NVIC_SetPriority(...) function
+ */
+static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/**
+ * @brief Decode the priority of an interrupt
+ *
+ * @param Priority The priority for the interrupt
+ * @param PriorityGroup The used priority group
+ * @param pPreemptPriority The preemptive priority value (starting from 0)
+ * @param pSubPriority The sub priority value (starting from 0)
+ *
+ * Decode an interrupt priority value with the given priority group to
+ * preemptive priority value and sub priority value.
+ * In case of a conflict between priority grouping and available
+ * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+ *
+ * The priority value can be retrieved with NVIC_GetPriority(...) function
+ */
+static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+
+/* ################################## SysTick function ############################################ */
+
+#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
+
+/**
+ * @brief Initialize and start the SysTick counter and its interrupt.
+ *
+ * @param ticks number of ticks between two interrupts
+ * @return 1 = failed, 0 = successful
+ *
+ * Initialise the system tick timer and its interrupt and start the
+ * system tick timer / counter in free running mode to generate
+ * periodical interrupts.
+ */
+static __INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+
+
+
+/* ################################## Reset function ############################################ */
+
+/**
+ * @brief Initiate a system reset request.
+ *
+ * Initiate a system reset request to reset the MCU
+ */
+static __INLINE void NVIC_SystemReset(void)
+{
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+
+/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface
+ Core Debug Interface containing:
+ - Core Debug Receive / Transmit Functions
+ - Core Debug Defines
+ - Core Debug Variables
+*/
+/*@{*/
+
+extern volatile int ITM_RxBuffer; /*!< variable to receive characters */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
+
+
+/**
+ * @brief Outputs a character via the ITM channel 0
+ *
+ * @param ch character to output
+ * @return character to output
+ *
+ * The function outputs a character via the ITM channel 0.
+ * The function returns when no debugger is connected that has booked the output.
+ * It is blocking when a debugger is connected, but the previous character send is not transmitted.
+ */
+static __INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */
+ (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/**
+ * @brief Inputs a character via variable ITM_RxBuffer
+ *
+ * @return received character, -1 = no character received
+ *
+ * The function inputs a character via variable ITM_RxBuffer.
+ * The function returns when no debugger is connected that has booked the output.
+ * It is blocking when a debugger is connected, but the previous character send is not transmitted.
+ */
+static __INLINE int ITM_ReceiveChar (void) {
+ int ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/**
+ * @brief Check if a character via variable ITM_RxBuffer is available
+ *
+ * @return 1 = character available, 0 = no character available
+ *
+ * The function checks variable ITM_RxBuffer whether a character is available or not.
+ * The function returns '1' if a character is available and '0' if no character is available.
+ */
+static __INLINE int ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+/*@}*/ /* end of group CMSIS_CM3_core_definitions */
+
+#endif /* __CM3_CORE_H__ */
+
+/*lint -restore */
diff --git a/sam3s_example/flash.ld b/sam3s_example/flash.ld
new file mode 100644
index 0000000..209a071
--- /dev/null
+++ b/sam3s_example/flash.ld
@@ -0,0 +1,143 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*------------------------------------------------------------------------------
+ * Linker script for running in internal FLASH on the ATSAM3S4
+ *----------------------------------------------------------------------------*/
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+SEARCH_DIR(.)
+ENTRY(main)
+
+/* Memory Spaces Definitions */
+MEMORY
+{
+ rom (rx) : ORIGIN = 0x00400000, LENGTH = 0x00020000 /* flash, 256K */
+ ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 /* sram, 48K */
+ /* rom (rx) : ORIGIN = 0x00400000, LENGTH = 0x00040000 /* flash, 256K */
+ /*ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x0000c000 /* sram, 48K */
+}
+
+/* Section Definitions */
+SECTIONS
+{
+ .text :
+ {
+ . = ALIGN(4);
+ _sfixed = .;
+ KEEP(*(.vectors .vectors.*))
+ *(.text .text.* .gnu.linkonce.t.*)
+ *(.glue_7t) *(.glue_7)
+ *(.rodata .rodata* .gnu.linkonce.r.*)
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+
+ /* Support C constructors, and C destructors in both user code
+ and the C library. This also provides support for C++ code. */
+ . = ALIGN(4);
+ KEEP(*(.init))
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*crtend.o(.ctors))
+
+ . = ALIGN(4);
+ KEEP(*(.fini))
+
+ . = ALIGN(4);
+ __fini_array_start = .;
+ KEEP (*(.fini_array))
+ KEEP (*(SORT(.fini_array.*)))
+ __fini_array_end = .;
+
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*crtend.o(.dtors))
+
+ . = ALIGN(4);
+ _efixed = .; /* End of text section */
+ } > rom
+
+ /* .ARM.exidx is sorted, so has to go in its own output section. */
+ PROVIDE_HIDDEN (__exidx_start = .);
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > rom
+ PROVIDE_HIDDEN (__exidx_end = .);
+
+ . = ALIGN(4);
+ _etext = .;
+
+ .relocate : AT (_etext)
+ {
+ . = ALIGN(4);
+ _srelocate = .;
+ *(.ramfunc .ramfunc.*);
+ *(.data .data.*);
+ . = ALIGN(4);
+ _erelocate = .;
+ } > ram
+
+ /* .bss section which is used for uninitialized data */
+ .bss (NOLOAD) :
+ {
+ . = ALIGN(4);
+ _sbss = . ;
+ _szero = .;
+ *(.bss .bss.*)
+ *(COMMON)
+ . = ALIGN(4);
+ _ebss = . ;
+ _ezero = .;
+ } > ram
+
+ /* stack section */
+ .stack (NOLOAD):
+ {
+ . = ALIGN(8);
+ *(.stack .stack.*)
+ } > ram
+
+ . = ALIGN(4);
+ _end = . ;
+}
diff --git a/sam3s_example/include/SAM3S.h b/sam3s_example/include/SAM3S.h
new file mode 100644
index 0000000..9aed4b9
--- /dev/null
+++ b/sam3s_example/include/SAM3S.h
@@ -0,0 +1,7735 @@
+/* ---------------------------------------------------------------------------- */
+/* Atmel Microcontroller Software Support */
+/* ---------------------------------------------------------------------------- */
+/* Copyright (c) 2010, Atmel Corporation */
+/* */
+/* All rights reserved. */
+/* */
+/* Redistribution and use in source and binary forms, with or without */
+/* modification, are permitted provided that the following condition is met: */
+/* */
+/* - Redistributions of source code must retain the above copyright notice, */
+/* this list of conditions and the disclaimer below. */
+/* */
+/* Atmel's name may not be used to endorse or promote products derived from */
+/* this software without specific prior written permission. */
+/* */
+/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
+/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
+/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
+/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
+/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
+/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
+/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
+/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
+/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
+/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
+/* ---------------------------------------------------------------------------- */
+/* */
+/* File Name : SAM3S.h */
+/* Object : SAM3S definitions */
+/* Generated by : AT91 SW Application Group */
+/* Generated on : 2010-09-06 */
+
+#ifndef SAM3S_H
+#define SAM3S_H
+
+/** \addtogroup SAM3S_definitions SAM3S definitions
+ This file defines all structures and symbols for SAM3S:
+ - registers and bitfields
+ - peripheral base address
+ - peripheral ID
+ - PIO definitions
+*/
+/*@{*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __ASSEMBLY__
+#include <stdint.h>
+#ifndef __cplusplus
+typedef volatile const uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */
+#else
+typedef volatile uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */
+#endif
+typedef volatile uint32_t WoReg; /**< Write only 32-bit register (volatile unsigned int) */
+typedef volatile uint32_t RwReg; /**< Read-Write 32-bit register (volatile unsigned int) */
+#define CAST(type, value) ((type *) value)
+#define REG_ACCESS(type, address) (*(type*)address) /**< C code: Register value */
+#else
+#define CAST(type, value) (value)
+#define REG_ACCESS(type, address) (address) /**< Assembly code: Register address */
+#endif
+
+/* ************************************************************************** */
+/* CMSIS DEFINITIONS FOR SAM3S */
+/* ************************************************************************** */
+/** \addtogroup SAM3S_cmsis CMSIS Definitions */
+/*@{*/
+
+/**< Interrupt Number Definition */
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions Numbers ******************************/
+ NonMaskableInt_IRQn = -14, /**< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /**< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /**< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /**< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /**< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /**< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /**< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /**< 15 Cortex-M3 System Tick Interrupt */
+/****** SAM3S specific Interrupt Numbers *********************************/
+
+ SUPC_IRQn = 0, /**< 0 SAM3S Supply Controller (SUPC) */
+ RSTC_IRQn = 1, /**< 1 SAM3S Reset Controller (RSTC) */
+ RTC_IRQn = 2, /**< 2 SAM3S Real Time Clock (RTC) */
+ RTT_IRQn = 3, /**< 3 SAM3S Real Time Timer (RTT) */
+ WDT_IRQn = 4, /**< 4 SAM3S Watchdog Timer (WDT) */
+ PMC_IRQn = 5, /**< 5 SAM3S Power Management Controller (PMC) */
+ EFC_IRQn = 6, /**< 6 SAM3S Enhanced Embedded Flash Controller (EFC) */
+ UART0_IRQn = 8, /**< 8 SAM3S UART 0 (UART0) */
+ UART1_IRQn = 9, /**< 9 SAM3S UART 1 (UART1) */
+ SMC_IRQn = 10, /**< 10 SAM3S Static Memory Controller (SMC) */
+ PIOA_IRQn = 11, /**< 11 SAM3S Parallel I/O Controller A (PIOA) */
+ PIOB_IRQn = 12, /**< 12 SAM3S Parallel I/O Controller B (PIOB) */
+ PIOC_IRQn = 13, /**< 13 SAM3S Parallel I/O Controller C (PIOC) */
+ USART0_IRQn = 14, /**< 14 SAM3S USART 0 (USART0) */
+ USART1_IRQn = 15, /**< 15 SAM3S USART 1 (USART1) */
+ HSMCI_IRQn = 18, /**< 18 SAM3S Multimedia Card Interface (HSMCI) */
+ TWI0_IRQn = 19, /**< 19 SAM3S Two Wire Interface 0 (TWI0) */
+ TWI1_IRQn = 20, /**< 20 SAM3S Two Wire Interface 1 (TWI1) */
+ SPI_IRQn = 21, /**< 21 SAM3S Serial Peripheral Interface (SPI) */
+ SSC_IRQn = 22, /**< 22 SAM3S Synchronous Serial Controler (SSC) */
+ TC0_IRQn = 23, /**< 23 SAM3S Timer/Counter 0 (TC0) */
+ TC1_IRQn = 24, /**< 24 SAM3S Timer/Counter 1 (TC1) */
+ TC2_IRQn = 25, /**< 25 SAM3S Timer/Counter 2 (TC2) */
+ TC3_IRQn = 26, /**< 26 SAM3S Timer/Counter 3 (TC3) */
+ TC4_IRQn = 27, /**< 27 SAM3S Timer/Counter 4 (TC4) */
+ TC5_IRQn = 28, /**< 28 SAM3S Timer/Counter 5 (TC5) */
+ ADC_IRQn = 29, /**< 29 SAM3S Analog To Digital Converter (ADC) */
+ DACC_IRQn = 30, /**< 30 SAM3S Digital To Analog Converter (DACC) */
+ PWM_IRQn = 31, /**< 31 SAM3S Pulse Width Modulation (PWM) */
+ CRCCU_IRQn = 32, /**< 32 SAM3S CRC Calculation Unit (CRCCU) */
+ ACC_IRQn = 33, /**< 33 SAM3S Analog Comparator (ACC) */
+ UDP_IRQn = 34 /**< 34 SAM3S USB Device Port (UDP) */
+} IRQn_Type;
+
+/**
+ * \brief Configuration of the Cortex-M3 Processor and Core Peripherals
+ */
+
+#define __MPU_PRESENT 1 /**< $product does provide a MPU */
+#define __NVIC_PRIO_BITS 4 /**< $product uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /**< Set to 1 if different SysTick Config is used */
+
+/*
+ * \brief CMSIS includes
+ */
+
+#include "core_cm3.h"
+
+/*@}*/
+
+/* ************************************************************************** */
+/** SOFTWARE PERIPHERAL API DEFINITION FOR SAM3S */
+/* ************************************************************************** */
+/** \addtogroup SAM3S_api Peripheral Software API */
+/*@{*/
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Analog Comparator Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_ACC Analog Comparator Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Acc hardware registers */
+typedef struct {
+ WoReg ACC_CR; /**< \brief (Acc Offset: 0x00) Control Register */
+ RwReg ACC_MR; /**< \brief (Acc Offset: 0x04) Mode Register */
+ RwReg Reserved1[7];
+ WoReg ACC_IER; /**< \brief (Acc Offset: 0x24) Interrupt Enable Register */
+ WoReg ACC_IDR; /**< \brief (Acc Offset: 0x28) Interrupt Disable Register */
+ RoReg ACC_IMR; /**< \brief (Acc Offset: 0x2C) Interrupt Mask Register */
+ RoReg ACC_ISR; /**< \brief (Acc Offset: 0x30) Interrupt Status Register */
+ RwReg Reserved2[24];
+ RwReg ACC_ACR; /**< \brief (Acc Offset: 0x94) Analog Control Register */
+ RwReg Reserved3[19];
+ RwReg ACC_WPMR; /**< \brief (Acc Offset: 0xE4) Write Protect Mode Register */
+ RoReg ACC_WPSR; /**< \brief (Acc Offset: 0xE8) Write Protect Status Register */
+} Acc;
+#endif /* __ASSEMBLY__ */
+/* -------- ACC_CR : (ACC Offset: 0x00) Control Register -------- */
+#define ACC_CR_SWRST (0x1u << 0) /**< \brief (ACC_CR) SoftWare ReSeT */
+/* -------- ACC_MR : (ACC Offset: 0x04) Mode Register -------- */
+#define ACC_MR_SELMINUS_Pos 0
+#define ACC_MR_SELMINUS_Msk (0x7u << ACC_MR_SELMINUS_Pos) /**< \brief (ACC_MR) SELection for MINUS comparator input */
+#define ACC_MR_SELMINUS_TS (0x0u << 0) /**< \brief (ACC_MR) SelectTS */
+#define ACC_MR_SELMINUS_ADVREF (0x1u << 0) /**< \brief (ACC_MR) Select ADVREF */
+#define ACC_MR_SELMINUS_DAC0 (0x2u << 0) /**< \brief (ACC_MR) Select DAC0 */
+#define ACC_MR_SELMINUS_DAC1 (0x3u << 0) /**< \brief (ACC_MR) Select DAC1 */
+#define ACC_MR_SELMINUS_AD0 (0x4u << 0) /**< \brief (ACC_MR) Select AD0 */
+#define ACC_MR_SELMINUS_AD1 (0x5u << 0) /**< \brief (ACC_MR) Select AD1 */
+#define ACC_MR_SELMINUS_AD2 (0x6u << 0) /**< \brief (ACC_MR) Select AD2 */
+#define ACC_MR_SELMINUS_AD3 (0x7u << 0) /**< \brief (ACC_MR) Select AD3 */
+#define ACC_MR_SELPLUS_Pos 4
+#define ACC_MR_SELPLUS_Msk (0x7u << ACC_MR_SELPLUS_Pos) /**< \brief (ACC_MR) SELection for PLUS comparator input */
+#define ACC_MR_SELPLUS_AD0 (0x0u << 4) /**< \brief (ACC_MR) Select AD0 */
+#define ACC_MR_SELPLUS_AD1 (0x1u << 4) /**< \brief (ACC_MR) Select AD1 */
+#define ACC_MR_SELPLUS_AD2 (0x2u << 4) /**< \brief (ACC_MR) Select AD2 */
+#define ACC_MR_SELPLUS_AD3 (0x3u << 4) /**< \brief (ACC_MR) Select AD3 */
+#define ACC_MR_SELPLUS_AD4 (0x4u << 4) /**< \brief (ACC_MR) Select AD4 */
+#define ACC_MR_SELPLUS_AD5 (0x5u << 4) /**< \brief (ACC_MR) Select AD5 */
+#define ACC_MR_SELPLUS_AD6 (0x6u << 4) /**< \brief (ACC_MR) Select AD6 */
+#define ACC_MR_SELPLUS_AD7 (0x7u << 4) /**< \brief (ACC_MR) Select AD7 */
+#define ACC_MR_ACEN (0x1u << 8) /**< \brief (ACC_MR) Analog Comparator ENable */
+#define ACC_MR_ACEN_DIS (0x0u << 8) /**< \brief (ACC_MR) Analog Comparator Disabled. */
+#define ACC_MR_ACEN_EN (0x1u << 8) /**< \brief (ACC_MR) Analog Comparator Enabled. */
+#define ACC_MR_EDGETYP_Pos 9
+#define ACC_MR_EDGETYP_Msk (0x3u << ACC_MR_EDGETYP_Pos) /**< \brief (ACC_MR) EDGE TYPe */
+#define ACC_MR_EDGETYP_RISING (0x0u << 9) /**< \brief (ACC_MR) only rising edge of comparator output */
+#define ACC_MR_EDGETYP_FALLING (0x1u << 9) /**< \brief (ACC_MR) falling edge of comparator output */
+#define ACC_MR_EDGETYP_ANY (0x2u << 9) /**< \brief (ACC_MR) any edge of comparator output */
+#define ACC_MR_INV (0x1u << 12) /**< \brief (ACC_MR) INVert comparator output */
+#define ACC_MR_INV_DIS (0x0u << 12) /**< \brief (ACC_MR) Analog Comparator output is directly processed. */
+#define ACC_MR_INV_EN (0x1u << 12) /**< \brief (ACC_MR) Analog Comparator output is inverted prior to being processed. */
+#define ACC_MR_SELFS (0x1u << 13) /**< \brief (ACC_MR) SELection of Fault Source */
+#define ACC_MR_SELFS_CF (0x0u << 13) /**< \brief (ACC_MR) the CF flag is used to drive the FAULT output. */
+#define ACC_MR_SELFS_OUTPUT (0x1u << 13) /**< \brief (ACC_MR) the output of the Analog Comparator flag is used to drive the FAULT output. */
+#define ACC_MR_FE (0x1u << 14) /**< \brief (ACC_MR) Fault Enable */
+#define ACC_MR_FE_DIS (0x0u << 14) /**< \brief (ACC_MR) the FAULT output is tied to 0. */
+#define ACC_MR_FE_EN (0x1u << 14) /**< \brief (ACC_MR) the FAULT output is driven by the signal defined by SELFS. */
+/* -------- ACC_IER : (ACC Offset: 0x24) Interrupt Enable Register -------- */
+#define ACC_IER_CE (0x1u << 0) /**< \brief (ACC_IER) Comparison Edge */
+/* -------- ACC_IDR : (ACC Offset: 0x28) Interrupt Disable Register -------- */
+#define ACC_IDR_CE (0x1u << 0) /**< \brief (ACC_IDR) Comparison Edge */
+/* -------- ACC_IMR : (ACC Offset: 0x2C) Interrupt Mask Register -------- */
+#define ACC_IMR_CE (0x1u << 0) /**< \brief (ACC_IMR) Comparison Edge */
+/* -------- ACC_ISR : (ACC Offset: 0x30) Interrupt Status Register -------- */
+#define ACC_ISR_CE (0x1u << 0) /**< \brief (ACC_ISR) Comparison Edge */
+#define ACC_ISR_SCO (0x1u << 1) /**< \brief (ACC_ISR) Synchronized Comparator Output */
+#define ACC_ISR_MASK (0x1u << 31) /**< \brief (ACC_ISR) */
+/* -------- ACC_ACR : (ACC Offset: 0x94) Analog Control Register -------- */
+#define ACC_ACR_ISEL (0x1u << 0) /**< \brief (ACC_ACR) Current SELection */
+#define ACC_ACR_ISEL_LOPW (0x0u << 0) /**< \brief (ACC_ACR) low power option. */
+#define ACC_ACR_ISEL_HISP (0x1u << 0) /**< \brief (ACC_ACR) high speed option. */
+#define ACC_ACR_HYST_Pos 1
+#define ACC_ACR_HYST_Msk (0x3u << ACC_ACR_HYST_Pos) /**< \brief (ACC_ACR) HYSTeresis selection */
+#define ACC_ACR_HYST(value) ((ACC_ACR_HYST_Msk & ((value) << ACC_ACR_HYST_Pos)))
+/* -------- ACC_WPMR : (ACC Offset: 0xE4) Write Protect Mode Register -------- */
+#define ACC_WPMR_WPEN (0x1u << 0) /**< \brief (ACC_WPMR) Write Protect Enable */
+#define ACC_WPMR_WPKEY_Pos 8
+#define ACC_WPMR_WPKEY_Msk (0xffffffu << ACC_WPMR_WPKEY_Pos) /**< \brief (ACC_WPMR) Write Protect KEY */
+#define ACC_WPMR_WPKEY(value) ((ACC_WPMR_WPKEY_Msk & ((value) << ACC_WPMR_WPKEY_Pos)))
+/* -------- ACC_WPSR : (ACC Offset: 0xE8) Write Protect Status Register -------- */
+#define ACC_WPSR_WPROTERR (0x1u << 0) /**< \brief (ACC_WPSR) Write PROTection ERRor */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Analog-to-digital Converter */
+/* ============================================================================= */
+/** \addtogroup SAM3S_ADC Analog-to-digital Converter */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Adc hardware registers */
+typedef struct {
+ WoReg ADC_CR; /**< \brief (Adc Offset: 0x00) Control Register */
+ RwReg ADC_MR; /**< \brief (Adc Offset: 0x04) Mode Register */
+ RwReg ADC_SEQR1; /**< \brief (Adc Offset: 0x08) Channel Sequence Register 1 */
+ RwReg ADC_SEQR2; /**< \brief (Adc Offset: 0x0C) Channel Sequence Register 2 */
+ WoReg ADC_CHER; /**< \brief (Adc Offset: 0x10) Channel Enable Register */
+ WoReg ADC_CHDR; /**< \brief (Adc Offset: 0x14) Channel Disable Register */
+ RoReg ADC_CHSR; /**< \brief (Adc Offset: 0x18) Channel Status Register */
+ RwReg Reserved1[1];
+ RoReg ADC_LCDR; /**< \brief (Adc Offset: 0x20) Last Converted Data Register */
+ WoReg ADC_IER; /**< \brief (Adc Offset: 0x24) Interrupt Enable Register */
+ WoReg ADC_IDR; /**< \brief (Adc Offset: 0x28) Interrupt Disable Register */
+ RoReg ADC_IMR; /**< \brief (Adc Offset: 0x2C) Interrupt Mask Register */
+ RoReg ADC_ISR; /**< \brief (Adc Offset: 0x30) Interrupt Status Register */
+ RwReg Reserved2[2];
+ RoReg ADC_OVER; /**< \brief (Adc Offset: 0x3C) Overrun Status Register */
+ RwReg ADC_EMR; /**< \brief (Adc Offset: 0x40) Extended Mode Register */
+ RwReg ADC_CWR; /**< \brief (Adc Offset: 0x44) Compare Window Register */
+ RwReg ADC_CGR; /**< \brief (Adc Offset: 0x48) Channel Gain Register */
+ RwReg ADC_COR; /**< \brief (Adc Offset: 0x4C) Channel Offset Register */
+ RoReg ADC_CDR[16]; /**< \brief (Adc Offset: 0x50) Channel Data Register */
+ RwReg Reserved3[1];
+ RwReg ADC_ACR; /**< \brief (Adc Offset: 0x94) Analog Control Register */
+ RwReg Reserved4[19];
+ RwReg ADC_WPMR; /**< \brief (Adc Offset: 0xE4) Write Protect Mode Register */
+ RoReg ADC_WPSR; /**< \brief (Adc Offset: 0xE8) Write Protect Status Register */
+ RwReg Reserved5[5];
+ RwReg ADC_RPR; /**< \brief (Adc Offset: 0x100) Receive Pointer Register */
+ RwReg ADC_RCR; /**< \brief (Adc Offset: 0x104) Receive Counter Register */
+ RwReg ADC_TPR; /**< \brief (Adc Offset: 0x108) Transmit Pointer Register */
+ RwReg ADC_TCR; /**< \brief (Adc Offset: 0x10C) Transmit Counter Register */
+ RwReg ADC_RNPR; /**< \brief (Adc Offset: 0x110) Receive Next Pointer Register */
+ RwReg ADC_RNCR; /**< \brief (Adc Offset: 0x114) Receive Next Counter Register */
+ RwReg ADC_TNPR; /**< \brief (Adc Offset: 0x118) Transmit Next Pointer Register */
+ RwReg ADC_TNCR; /**< \brief (Adc Offset: 0x11C) Transmit Next Counter Register */
+ WoReg ADC_PTCR; /**< \brief (Adc Offset: 0x120) Transfer Control Register */
+ RoReg ADC_PTSR; /**< \brief (Adc Offset: 0x124) Transfer Status Register */
+} Adc;
+#endif /* __ASSEMBLY__ */
+/* -------- ADC_CR : (ADC Offset: 0x00) Control Register -------- */
+#define ADC_CR_SWRST (0x1u << 0) /**< \brief (ADC_CR) Software Reset */
+#define ADC_CR_START (0x1u << 1) /**< \brief (ADC_CR) Start Conversion */
+/* -------- ADC_MR : (ADC Offset: 0x04) Mode Register -------- */
+#define ADC_MR_TRGEN (0x1u << 0) /**< \brief (ADC_MR) Trigger Enable */
+#define ADC_MR_TRGEN_DIS (0x0u << 0) /**< \brief (ADC_MR) Hardware triggers are disabled. Starting a conversion is only possible by software. */
+#define ADC_MR_TRGEN_EN (0x1u << 0) /**< \brief (ADC_MR) Hardware trigger selected by TRGSEL field is enabled. */
+#define ADC_MR_TRGSEL_Pos 1
+#define ADC_MR_TRGSEL_Msk (0x7u << ADC_MR_TRGSEL_Pos) /**< \brief (ADC_MR) Trigger Selection */
+#define ADC_MR_TRGSEL_ADC_TRIG0 (0x0u << 1) /**< \brief (ADC_MR) External trigger */
+#define ADC_MR_TRGSEL_ADC_TRIG1 (0x1u << 1) /**< \brief (ADC_MR) TIO Output of the Timer Counter Channel 0 */
+#define ADC_MR_TRGSEL_ADC_TRIG2 (0x2u << 1) /**< \brief (ADC_MR) TIO Output of the Timer Counter Channel 1 */
+#define ADC_MR_TRGSEL_ADC_TRIG3 (0x3u << 1) /**< \brief (ADC_MR) TIO Output of the Timer Counter Channel 2 */
+#define ADC_MR_TRGSEL_ADC_TRIG4 (0x4u << 1) /**< \brief (ADC_MR) PWM Event Line 0 */
+#define ADC_MR_TRGSEL_ADC_TRIG5 (0x5u << 1) /**< \brief (ADC_MR) PWM Event Line 1 */
+#define ADC_MR_LOWRES (0x1u << 4) /**< \brief (ADC_MR) Resolution */
+#define ADC_MR_LOWRES_BITS_12 (0x0u << 4) /**< \brief (ADC_MR) 12-bit resolution */
+#define ADC_MR_LOWRES_BITS_10 (0x1u << 4) /**< \brief (ADC_MR) 10-bit resolution */
+#define ADC_MR_SLEEP (0x1u << 5) /**< \brief (ADC_MR) Sleep Mode */
+#define ADC_MR_SLEEP_NORMAL (0x0u << 5) /**< \brief (ADC_MR) Normal Mode: The ADC Core and reference voltage circuitry are kept ON between conversions */
+#define ADC_MR_SLEEP_SLEEP (0x1u << 5) /**< \brief (ADC_MR) Sleep Mode: The ADC Core and reference voltage circuitry are OFF between conversions */
+#define ADC_MR_FWUP (0x1u << 6) /**< \brief (ADC_MR) Fast Wake Up */
+#define ADC_MR_FWUP_OFF (0x0u << 6) /**< \brief (ADC_MR) Normal Sleep Mode: The sleep mode is defined by the SLEEP bit */
+#define ADC_MR_FWUP_ON (0x1u << 6) /**< \brief (ADC_MR) Fast Wake Up Sleep Mode: The Voltage reference is ON between conversions and ADC Core is OFF */
+#define ADC_MR_FREERUN (0x1u << 7) /**< \brief (ADC_MR) Free Run Mode */
+#define ADC_MR_FREERUN_OFF (0x0u << 7) /**< \brief (ADC_MR) Normal Mode */
+#define ADC_MR_FREERUN_ON (0x1u << 7) /**< \brief (ADC_MR) Free Run Mode: Never wait for any trigger. */
+#define ADC_MR_PRESCAL_Pos 8
+#define ADC_MR_PRESCAL_Msk (0xffu << ADC_MR_PRESCAL_Pos) /**< \brief (ADC_MR) Prescaler Rate Selection */
+#define ADC_MR_PRESCAL(value) ((ADC_MR_PRESCAL_Msk & ((value) << ADC_MR_PRESCAL_Pos)))
+#define ADC_MR_STARTUP_Pos 16
+#define ADC_MR_STARTUP_Msk (0xfu << ADC_MR_STARTUP_Pos) /**< \brief (ADC_MR) Start Up Time */
+#define ADC_MR_STARTUP_SUT0 (0x0u << 16) /**< \brief (ADC_MR) 0 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT8 (0x1u << 16) /**< \brief (ADC_MR) 8 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT16 (0x2u << 16) /**< \brief (ADC_MR) 16 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT24 (0x3u << 16) /**< \brief (ADC_MR) 24 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT64 (0x4u << 16) /**< \brief (ADC_MR) 64 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT80 (0x5u << 16) /**< \brief (ADC_MR) 80 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT96 (0x6u << 16) /**< \brief (ADC_MR) 96 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT112 (0x7u << 16) /**< \brief (ADC_MR) 112 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT512 (0x8u << 16) /**< \brief (ADC_MR) 512 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT576 (0x9u << 16) /**< \brief (ADC_MR) 576 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT640 (0xAu << 16) /**< \brief (ADC_MR) 640 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT704 (0xBu << 16) /**< \brief (ADC_MR) 704 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT768 (0xCu << 16) /**< \brief (ADC_MR) 768 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT832 (0xDu << 16) /**< \brief (ADC_MR) 832 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT896 (0xEu << 16) /**< \brief (ADC_MR) 896 periods of ADCClock */
+#define ADC_MR_STARTUP_SUT960 (0xFu << 16) /**< \brief (ADC_MR) 960 periods of ADCClock */
+#define ADC_MR_SETTLING_Pos 20
+#define ADC_MR_SETTLING_Msk (0x3u << ADC_MR_SETTLING_Pos) /**< \brief (ADC_MR) Analog Settling Time */
+#define ADC_MR_SETTLING(value) ((ADC_MR_SETTLING_Msk & ((value) << ADC_MR_SETTLING_Pos)))
+#define ADC_MR_ANACH (0x1u << 23) /**< \brief (ADC_MR) Analog Change */
+#define ADC_MR_ANACH_NONE (0x0u << 23) /**< \brief (ADC_MR) No analog change on channel switching: DIFF0, GAIN0 and OFF0 are used for all channels */
+#define ADC_MR_ANACH_ALLOWED (0x1u << 23) /**< \brief (ADC_MR) Allows different analog settings for each channel. See ADC_CGR and ADC_COR Registers */
+#define ADC_MR_TRACKTIM_Pos 24
+#define ADC_MR_TRACKTIM_Msk (0xfu << ADC_MR_TRACKTIM_Pos) /**< \brief (ADC_MR) Tracking Time */
+#define ADC_MR_TRACKTIM(value) ((ADC_MR_TRACKTIM_Msk & ((value) << ADC_MR_TRACKTIM_Pos)))
+#define ADC_MR_TRANSFER_Pos 28
+#define ADC_MR_TRANSFER_Msk (0x3u << ADC_MR_TRANSFER_Pos) /**< \brief (ADC_MR) */
+#define ADC_MR_TRANSFER(value) ((ADC_MR_TRANSFER_Msk & ((value) << ADC_MR_TRANSFER_Pos)))
+#define ADC_MR_USEQ (0x1u << 31) /**< \brief (ADC_MR) Use Sequence Enable */
+#define ADC_MR_USEQ_NUM_ORDER (0x0u << 31) /**< \brief (ADC_MR) Normal Mode: The controller converts channels in a simple numeric order. */
+#define ADC_MR_USEQ_REG_ORDER (0x1u << 31) /**< \brief (ADC_MR) User Sequence Mode: The sequence respects what is defined in ADC_SEQR1 and ADC_SEQR2 registers. */
+/* -------- ADC_SEQR1 : (ADC Offset: 0x08) Channel Sequence Register 1 -------- */
+#define ADC_SEQR1_USCH1_Pos 0
+#define ADC_SEQR1_USCH1_Msk (0x7u << ADC_SEQR1_USCH1_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 1 */
+#define ADC_SEQR1_USCH1(value) ((ADC_SEQR1_USCH1_Msk & ((value) << ADC_SEQR1_USCH1_Pos)))
+#define ADC_SEQR1_USCH2_Pos 4
+#define ADC_SEQR1_USCH2_Msk (0x7u << ADC_SEQR1_USCH2_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 2 */
+#define ADC_SEQR1_USCH2(value) ((ADC_SEQR1_USCH2_Msk & ((value) << ADC_SEQR1_USCH2_Pos)))
+#define ADC_SEQR1_USCH3_Pos 8
+#define ADC_SEQR1_USCH3_Msk (0x7u << ADC_SEQR1_USCH3_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 3 */
+#define ADC_SEQR1_USCH3(value) ((ADC_SEQR1_USCH3_Msk & ((value) << ADC_SEQR1_USCH3_Pos)))
+#define ADC_SEQR1_USCH4_Pos 12
+#define ADC_SEQR1_USCH4_Msk (0x7u << ADC_SEQR1_USCH4_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 4 */
+#define ADC_SEQR1_USCH4(value) ((ADC_SEQR1_USCH4_Msk & ((value) << ADC_SEQR1_USCH4_Pos)))
+#define ADC_SEQR1_USCH5_Pos 16
+#define ADC_SEQR1_USCH5_Msk (0x7u << ADC_SEQR1_USCH5_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 5 */
+#define ADC_SEQR1_USCH5(value) ((ADC_SEQR1_USCH5_Msk & ((value) << ADC_SEQR1_USCH5_Pos)))
+#define ADC_SEQR1_USCH6_Pos 20
+#define ADC_SEQR1_USCH6_Msk (0x7u << ADC_SEQR1_USCH6_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 6 */
+#define ADC_SEQR1_USCH6(value) ((ADC_SEQR1_USCH6_Msk & ((value) << ADC_SEQR1_USCH6_Pos)))
+#define ADC_SEQR1_USCH7_Pos 24
+#define ADC_SEQR1_USCH7_Msk (0x7u << ADC_SEQR1_USCH7_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 7 */
+#define ADC_SEQR1_USCH7(value) ((ADC_SEQR1_USCH7_Msk & ((value) << ADC_SEQR1_USCH7_Pos)))
+#define ADC_SEQR1_USCH8_Pos 28
+#define ADC_SEQR1_USCH8_Msk (0x7u << ADC_SEQR1_USCH8_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 8 */
+#define ADC_SEQR1_USCH8(value) ((ADC_SEQR1_USCH8_Msk & ((value) << ADC_SEQR1_USCH8_Pos)))
+/* -------- ADC_SEQR2 : (ADC Offset: 0x0C) Channel Sequence Register 2 -------- */
+#define ADC_SEQR2_USCH9_Pos 0
+#define ADC_SEQR2_USCH9_Msk (0x7u << ADC_SEQR2_USCH9_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 9 */
+#define ADC_SEQR2_USCH9(value) ((ADC_SEQR2_USCH9_Msk & ((value) << ADC_SEQR2_USCH9_Pos)))
+#define ADC_SEQR2_USCH10_Pos 4
+#define ADC_SEQR2_USCH10_Msk (0x7u << ADC_SEQR2_USCH10_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 10 */
+#define ADC_SEQR2_USCH10(value) ((ADC_SEQR2_USCH10_Msk & ((value) << ADC_SEQR2_USCH10_Pos)))
+#define ADC_SEQR2_USCH11_Pos 8
+#define ADC_SEQR2_USCH11_Msk (0x7u << ADC_SEQR2_USCH11_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 11 */
+#define ADC_SEQR2_USCH11(value) ((ADC_SEQR2_USCH11_Msk & ((value) << ADC_SEQR2_USCH11_Pos)))
+#define ADC_SEQR2_USCH12_Pos 12
+#define ADC_SEQR2_USCH12_Msk (0x7u << ADC_SEQR2_USCH12_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 12 */
+#define ADC_SEQR2_USCH12(value) ((ADC_SEQR2_USCH12_Msk & ((value) << ADC_SEQR2_USCH12_Pos)))
+#define ADC_SEQR2_USCH13_Pos 16
+#define ADC_SEQR2_USCH13_Msk (0x7u << ADC_SEQR2_USCH13_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 13 */
+#define ADC_SEQR2_USCH13(value) ((ADC_SEQR2_USCH13_Msk & ((value) << ADC_SEQR2_USCH13_Pos)))
+#define ADC_SEQR2_USCH14_Pos 20
+#define ADC_SEQR2_USCH14_Msk (0x7u << ADC_SEQR2_USCH14_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 14 */
+#define ADC_SEQR2_USCH14(value) ((ADC_SEQR2_USCH14_Msk & ((value) << ADC_SEQR2_USCH14_Pos)))
+#define ADC_SEQR2_USCH15_Pos 24
+#define ADC_SEQR2_USCH15_Msk (0x7u << ADC_SEQR2_USCH15_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 15 */
+#define ADC_SEQR2_USCH15(value) ((ADC_SEQR2_USCH15_Msk & ((value) << ADC_SEQR2_USCH15_Pos)))
+#define ADC_SEQR2_USCH16_Pos 28
+#define ADC_SEQR2_USCH16_Msk (0x7u << ADC_SEQR2_USCH16_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 16 */
+#define ADC_SEQR2_USCH16(value) ((ADC_SEQR2_USCH16_Msk & ((value) << ADC_SEQR2_USCH16_Pos)))
+/* -------- ADC_CHER : (ADC Offset: 0x10) Channel Enable Register -------- */
+#define ADC_CHER_CH0 (0x1u << 0) /**< \brief (ADC_CHER) Channel 0 Enable */
+#define ADC_CHER_CH1 (0x1u << 1) /**< \brief (ADC_CHER) Channel 1 Enable */
+#define ADC_CHER_CH2 (0x1u << 2) /**< \brief (ADC_CHER) Channel 2 Enable */
+#define ADC_CHER_CH3 (0x1u << 3) /**< \brief (ADC_CHER) Channel 3 Enable */
+#define ADC_CHER_CH4 (0x1u << 4) /**< \brief (ADC_CHER) Channel 4 Enable */
+#define ADC_CHER_CH5 (0x1u << 5) /**< \brief (ADC_CHER) Channel 5 Enable */
+#define ADC_CHER_CH6 (0x1u << 6) /**< \brief (ADC_CHER) Channel 6 Enable */
+#define ADC_CHER_CH7 (0x1u << 7) /**< \brief (ADC_CHER) Channel 7 Enable */
+#define ADC_CHER_CH8 (0x1u << 8) /**< \brief (ADC_CHER) Channel 8 Enable */
+#define ADC_CHER_CH9 (0x1u << 9) /**< \brief (ADC_CHER) Channel 9 Enable */
+#define ADC_CHER_CH10 (0x1u << 10) /**< \brief (ADC_CHER) Channel 10 Enable */
+#define ADC_CHER_CH11 (0x1u << 11) /**< \brief (ADC_CHER) Channel 11 Enable */
+#define ADC_CHER_CH12 (0x1u << 12) /**< \brief (ADC_CHER) Channel 12 Enable */
+#define ADC_CHER_CH13 (0x1u << 13) /**< \brief (ADC_CHER) Channel 13 Enable */
+#define ADC_CHER_CH14 (0x1u << 14) /**< \brief (ADC_CHER) Channel 14 Enable */
+#define ADC_CHER_CH15 (0x1u << 15) /**< \brief (ADC_CHER) Channel 15 Enable */
+/* -------- ADC_CHDR : (ADC Offset: 0x14) Channel Disable Register -------- */
+#define ADC_CHDR_CH0 (0x1u << 0) /**< \brief (ADC_CHDR) Channel 0 Disable */
+#define ADC_CHDR_CH1 (0x1u << 1) /**< \brief (ADC_CHDR) Channel 1 Disable */
+#define ADC_CHDR_CH2 (0x1u << 2) /**< \brief (ADC_CHDR) Channel 2 Disable */
+#define ADC_CHDR_CH3 (0x1u << 3) /**< \brief (ADC_CHDR) Channel 3 Disable */
+#define ADC_CHDR_CH4 (0x1u << 4) /**< \brief (ADC_CHDR) Channel 4 Disable */
+#define ADC_CHDR_CH5 (0x1u << 5) /**< \brief (ADC_CHDR) Channel 5 Disable */
+#define ADC_CHDR_CH6 (0x1u << 6) /**< \brief (ADC_CHDR) Channel 6 Disable */
+#define ADC_CHDR_CH7 (0x1u << 7) /**< \brief (ADC_CHDR) Channel 7 Disable */
+#define ADC_CHDR_CH8 (0x1u << 8) /**< \brief (ADC_CHDR) Channel 8 Disable */
+#define ADC_CHDR_CH9 (0x1u << 9) /**< \brief (ADC_CHDR) Channel 9 Disable */
+#define ADC_CHDR_CH10 (0x1u << 10) /**< \brief (ADC_CHDR) Channel 10 Disable */
+#define ADC_CHDR_CH11 (0x1u << 11) /**< \brief (ADC_CHDR) Channel 11 Disable */
+#define ADC_CHDR_CH12 (0x1u << 12) /**< \brief (ADC_CHDR) Channel 12 Disable */
+#define ADC_CHDR_CH13 (0x1u << 13) /**< \brief (ADC_CHDR) Channel 13 Disable */
+#define ADC_CHDR_CH14 (0x1u << 14) /**< \brief (ADC_CHDR) Channel 14 Disable */
+#define ADC_CHDR_CH15 (0x1u << 15) /**< \brief (ADC_CHDR) Channel 15 Disable */
+/* -------- ADC_CHSR : (ADC Offset: 0x18) Channel Status Register -------- */
+#define ADC_CHSR_CH0 (0x1u << 0) /**< \brief (ADC_CHSR) Channel 0 Status */
+#define ADC_CHSR_CH1 (0x1u << 1) /**< \brief (ADC_CHSR) Channel 1 Status */
+#define ADC_CHSR_CH2 (0x1u << 2) /**< \brief (ADC_CHSR) Channel 2 Status */
+#define ADC_CHSR_CH3 (0x1u << 3) /**< \brief (ADC_CHSR) Channel 3 Status */
+#define ADC_CHSR_CH4 (0x1u << 4) /**< \brief (ADC_CHSR) Channel 4 Status */
+#define ADC_CHSR_CH5 (0x1u << 5) /**< \brief (ADC_CHSR) Channel 5 Status */
+#define ADC_CHSR_CH6 (0x1u << 6) /**< \brief (ADC_CHSR) Channel 6 Status */
+#define ADC_CHSR_CH7 (0x1u << 7) /**< \brief (ADC_CHSR) Channel 7 Status */
+#define ADC_CHSR_CH8 (0x1u << 8) /**< \brief (ADC_CHSR) Channel 8 Status */
+#define ADC_CHSR_CH9 (0x1u << 9) /**< \brief (ADC_CHSR) Channel 9 Status */
+#define ADC_CHSR_CH10 (0x1u << 10) /**< \brief (ADC_CHSR) Channel 10 Status */
+#define ADC_CHSR_CH11 (0x1u << 11) /**< \brief (ADC_CHSR) Channel 11 Status */
+#define ADC_CHSR_CH12 (0x1u << 12) /**< \brief (ADC_CHSR) Channel 12 Status */
+#define ADC_CHSR_CH13 (0x1u << 13) /**< \brief (ADC_CHSR) Channel 13 Status */
+#define ADC_CHSR_CH14 (0x1u << 14) /**< \brief (ADC_CHSR) Channel 14 Status */
+#define ADC_CHSR_CH15 (0x1u << 15) /**< \brief (ADC_CHSR) Channel 15 Status */
+/* -------- ADC_LCDR : (ADC Offset: 0x20) Last Converted Data Register -------- */
+#define ADC_LCDR_LDATA_Pos 0
+#define ADC_LCDR_LDATA_Msk (0xfffu << ADC_LCDR_LDATA_Pos) /**< \brief (ADC_LCDR) Last Data Converted */
+#define ADC_LCDR_CHNB_Pos 12
+#define ADC_LCDR_CHNB_Msk (0xfu << ADC_LCDR_CHNB_Pos) /**< \brief (ADC_LCDR) Channel Number */
+/* -------- ADC_IER : (ADC Offset: 0x24) Interrupt Enable Register -------- */
+#define ADC_IER_EOC0 (0x1u << 0) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 0 */
+#define ADC_IER_EOC1 (0x1u << 1) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 1 */
+#define ADC_IER_EOC2 (0x1u << 2) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 2 */
+#define ADC_IER_EOC3 (0x1u << 3) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 3 */
+#define ADC_IER_EOC4 (0x1u << 4) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 4 */
+#define ADC_IER_EOC5 (0x1u << 5) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 5 */
+#define ADC_IER_EOC6 (0x1u << 6) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 6 */
+#define ADC_IER_EOC7 (0x1u << 7) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 7 */
+#define ADC_IER_EOC8 (0x1u << 8) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 8 */
+#define ADC_IER_EOC9 (0x1u << 9) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 9 */
+#define ADC_IER_EOC10 (0x1u << 10) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 10 */
+#define ADC_IER_EOC11 (0x1u << 11) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 11 */
+#define ADC_IER_EOC12 (0x1u << 12) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 12 */
+#define ADC_IER_EOC13 (0x1u << 13) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 13 */
+#define ADC_IER_EOC14 (0x1u << 14) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 14 */
+#define ADC_IER_EOC15 (0x1u << 15) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 15 */
+#define ADC_IER_DRDY (0x1u << 24) /**< \brief (ADC_IER) Data Ready Interrupt Enable */
+#define ADC_IER_GOVRE (0x1u << 25) /**< \brief (ADC_IER) General Overrun Error Interrupt Enable */
+#define ADC_IER_COMPE (0x1u << 26) /**< \brief (ADC_IER) Comparison Event Interrupt Enable */
+#define ADC_IER_ENDRX (0x1u << 27) /**< \brief (ADC_IER) End of Receive Buffer Interrupt Enable */
+#define ADC_IER_RXBUFF (0x1u << 28) /**< \brief (ADC_IER) Receive Buffer Full Interrupt Enable */
+/* -------- ADC_IDR : (ADC Offset: 0x28) Interrupt Disable Register -------- */
+#define ADC_IDR_EOC0 (0x1u << 0) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 0 */
+#define ADC_IDR_EOC1 (0x1u << 1) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 1 */
+#define ADC_IDR_EOC2 (0x1u << 2) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 2 */
+#define ADC_IDR_EOC3 (0x1u << 3) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 3 */
+#define ADC_IDR_EOC4 (0x1u << 4) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 4 */
+#define ADC_IDR_EOC5 (0x1u << 5) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 5 */
+#define ADC_IDR_EOC6 (0x1u << 6) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 6 */
+#define ADC_IDR_EOC7 (0x1u << 7) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 7 */
+#define ADC_IDR_EOC8 (0x1u << 8) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 8 */
+#define ADC_IDR_EOC9 (0x1u << 9) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 9 */
+#define ADC_IDR_EOC10 (0x1u << 10) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 10 */
+#define ADC_IDR_EOC11 (0x1u << 11) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 11 */
+#define ADC_IDR_EOC12 (0x1u << 12) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 12 */
+#define ADC_IDR_EOC13 (0x1u << 13) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 13 */
+#define ADC_IDR_EOC14 (0x1u << 14) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 14 */
+#define ADC_IDR_EOC15 (0x1u << 15) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 15 */
+#define ADC_IDR_DRDY (0x1u << 24) /**< \brief (ADC_IDR) Data Ready Interrupt Disable */
+#define ADC_IDR_GOVRE (0x1u << 25) /**< \brief (ADC_IDR) General Overrun Error Interrupt Disable */
+#define ADC_IDR_COMPE (0x1u << 26) /**< \brief (ADC_IDR) Comparison Event Interrupt Disable */
+#define ADC_IDR_ENDRX (0x1u << 27) /**< \brief (ADC_IDR) End of Receive Buffer Interrupt Disable */
+#define ADC_IDR_RXBUFF (0x1u << 28) /**< \brief (ADC_IDR) Receive Buffer Full Interrupt Disable */
+/* -------- ADC_IMR : (ADC Offset: 0x2C) Interrupt Mask Register -------- */
+#define ADC_IMR_EOC0 (0x1u << 0) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 0 */
+#define ADC_IMR_EOC1 (0x1u << 1) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 1 */
+#define ADC_IMR_EOC2 (0x1u << 2) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 2 */
+#define ADC_IMR_EOC3 (0x1u << 3) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 3 */
+#define ADC_IMR_EOC4 (0x1u << 4) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 4 */
+#define ADC_IMR_EOC5 (0x1u << 5) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 5 */
+#define ADC_IMR_EOC6 (0x1u << 6) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 6 */
+#define ADC_IMR_EOC7 (0x1u << 7) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 7 */
+#define ADC_IMR_EOC8 (0x1u << 8) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 8 */
+#define ADC_IMR_EOC9 (0x1u << 9) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 9 */
+#define ADC_IMR_EOC10 (0x1u << 10) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 10 */
+#define ADC_IMR_EOC11 (0x1u << 11) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 11 */
+#define ADC_IMR_EOC12 (0x1u << 12) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 12 */
+#define ADC_IMR_EOC13 (0x1u << 13) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 13 */
+#define ADC_IMR_EOC14 (0x1u << 14) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 14 */
+#define ADC_IMR_EOC15 (0x1u << 15) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 15 */
+#define ADC_IMR_DRDY (0x1u << 24) /**< \brief (ADC_IMR) Data Ready Interrupt Mask */
+#define ADC_IMR_GOVRE (0x1u << 25) /**< \brief (ADC_IMR) General Overrun Error Interrupt Mask */
+#define ADC_IMR_COMPE (0x1u << 26) /**< \brief (ADC_IMR) Comparison Event Interrupt Mask */
+#define ADC_IMR_ENDRX (0x1u << 27) /**< \brief (ADC_IMR) End of Receive Buffer Interrupt Mask */
+#define ADC_IMR_RXBUFF (0x1u << 28) /**< \brief (ADC_IMR) Receive Buffer Full Interrupt Mask */
+/* -------- ADC_ISR : (ADC Offset: 0x30) Interrupt Status Register -------- */
+#define ADC_ISR_EOC0 (0x1u << 0) /**< \brief (ADC_ISR) End of Conversion 0 */
+#define ADC_ISR_EOC1 (0x1u << 1) /**< \brief (ADC_ISR) End of Conversion 1 */
+#define ADC_ISR_EOC2 (0x1u << 2) /**< \brief (ADC_ISR) End of Conversion 2 */
+#define ADC_ISR_EOC3 (0x1u << 3) /**< \brief (ADC_ISR) End of Conversion 3 */
+#define ADC_ISR_EOC4 (0x1u << 4) /**< \brief (ADC_ISR) End of Conversion 4 */
+#define ADC_ISR_EOC5 (0x1u << 5) /**< \brief (ADC_ISR) End of Conversion 5 */
+#define ADC_ISR_EOC6 (0x1u << 6) /**< \brief (ADC_ISR) End of Conversion 6 */
+#define ADC_ISR_EOC7 (0x1u << 7) /**< \brief (ADC_ISR) End of Conversion 7 */
+#define ADC_ISR_EOC8 (0x1u << 8) /**< \brief (ADC_ISR) End of Conversion 8 */
+#define ADC_ISR_EOC9 (0x1u << 9) /**< \brief (ADC_ISR) End of Conversion 9 */
+#define ADC_ISR_EOC10 (0x1u << 10) /**< \brief (ADC_ISR) End of Conversion 10 */
+#define ADC_ISR_EOC11 (0x1u << 11) /**< \brief (ADC_ISR) End of Conversion 11 */
+#define ADC_ISR_EOC12 (0x1u << 12) /**< \brief (ADC_ISR) End of Conversion 12 */
+#define ADC_ISR_EOC13 (0x1u << 13) /**< \brief (ADC_ISR) End of Conversion 13 */
+#define ADC_ISR_EOC14 (0x1u << 14) /**< \brief (ADC_ISR) End of Conversion 14 */
+#define ADC_ISR_EOC15 (0x1u << 15) /**< \brief (ADC_ISR) End of Conversion 15 */
+#define ADC_ISR_DRDY (0x1u << 24) /**< \brief (ADC_ISR) Data Ready */
+#define ADC_ISR_GOVRE (0x1u << 25) /**< \brief (ADC_ISR) General Overrun Error */
+#define ADC_ISR_COMPE (0x1u << 26) /**< \brief (ADC_ISR) Comparison Error */
+#define ADC_ISR_ENDRX (0x1u << 27) /**< \brief (ADC_ISR) End of RX Buffer */
+#define ADC_ISR_RXBUFF (0x1u << 28) /**< \brief (ADC_ISR) RX Buffer Full */
+/* -------- ADC_OVER : (ADC Offset: 0x3C) Overrun Status Register -------- */
+#define ADC_OVER_OVRE0 (0x1u << 0) /**< \brief (ADC_OVER) Overrun Error 0 */
+#define ADC_OVER_OVRE1 (0x1u << 1) /**< \brief (ADC_OVER) Overrun Error 1 */
+#define ADC_OVER_OVRE2 (0x1u << 2) /**< \brief (ADC_OVER) Overrun Error 2 */
+#define ADC_OVER_OVRE3 (0x1u << 3) /**< \brief (ADC_OVER) Overrun Error 3 */
+#define ADC_OVER_OVRE4 (0x1u << 4) /**< \brief (ADC_OVER) Overrun Error 4 */
+#define ADC_OVER_OVRE5 (0x1u << 5) /**< \brief (ADC_OVER) Overrun Error 5 */
+#define ADC_OVER_OVRE6 (0x1u << 6) /**< \brief (ADC_OVER) Overrun Error 6 */
+#define ADC_OVER_OVRE7 (0x1u << 7) /**< \brief (ADC_OVER) Overrun Error 7 */
+#define ADC_OVER_OVRE8 (0x1u << 8) /**< \brief (ADC_OVER) Overrun Error 8 */
+#define ADC_OVER_OVRE9 (0x1u << 9) /**< \brief (ADC_OVER) Overrun Error 9 */
+#define ADC_OVER_OVRE10 (0x1u << 10) /**< \brief (ADC_OVER) Overrun Error 10 */
+#define ADC_OVER_OVRE11 (0x1u << 11) /**< \brief (ADC_OVER) Overrun Error 11 */
+#define ADC_OVER_OVRE12 (0x1u << 12) /**< \brief (ADC_OVER) Overrun Error 12 */
+#define ADC_OVER_OVRE13 (0x1u << 13) /**< \brief (ADC_OVER) Overrun Error 13 */
+#define ADC_OVER_OVRE14 (0x1u << 14) /**< \brief (ADC_OVER) Overrun Error 14 */
+#define ADC_OVER_OVRE15 (0x1u << 15) /**< \brief (ADC_OVER) Overrun Error 15 */
+/* -------- ADC_EMR : (ADC Offset: 0x40) Extended Mode Register -------- */
+#define ADC_EMR_CMPMODE_Pos 0
+#define ADC_EMR_CMPMODE_Msk (0x3u << ADC_EMR_CMPMODE_Pos) /**< \brief (ADC_EMR) Comparison Mode */
+#define ADC_EMR_CMPMODE_LOW (0x0u << 0) /**< \brief (ADC_EMR) Generates an event when the converted data is lower than the low threshold of the window. */
+#define ADC_EMR_CMPMODE_HIGH (0x1u << 0) /**< \brief (ADC_EMR) Generates an event when the converted data is higher than the high threshold of the window. */
+#define ADC_EMR_CMPMODE_IN (0x2u << 0) /**< \brief (ADC_EMR) Generates an event when the converted data is in the comparison window. */
+#define ADC_EMR_CMPMODE_OUT (0x3u << 0) /**< \brief (ADC_EMR) Generates an event when the converted data is out of the comparison window. */
+#define ADC_EMR_CMPSEL_Pos 4
+#define ADC_EMR_CMPSEL_Msk (0xfu << ADC_EMR_CMPSEL_Pos) /**< \brief (ADC_EMR) Comparison Selected Channel */
+#define ADC_EMR_CMPSEL(value) ((ADC_EMR_CMPSEL_Msk & ((value) << ADC_EMR_CMPSEL_Pos)))
+#define ADC_EMR_CMPALL (0x1u << 9) /**< \brief (ADC_EMR) Compare All Channels */
+#define ADC_EMR_TAG (0x1u << 24) /**< \brief (ADC_EMR) TAG of ADC_LDCR register */
+/* -------- ADC_CWR : (ADC Offset: 0x44) Compare Window Register -------- */
+#define ADC_CWR_LOWTHRES_Pos 0
+#define ADC_CWR_LOWTHRES_Msk (0xfffu << ADC_CWR_LOWTHRES_Pos) /**< \brief (ADC_CWR) Low Threshold */
+#define ADC_CWR_LOWTHRES(value) ((ADC_CWR_LOWTHRES_Msk & ((value) << ADC_CWR_LOWTHRES_Pos)))
+#define ADC_CWR_HIGHTHRES_Pos 16
+#define ADC_CWR_HIGHTHRES_Msk (0xfffu << ADC_CWR_HIGHTHRES_Pos) /**< \brief (ADC_CWR) High Threshold */
+#define ADC_CWR_HIGHTHRES(value) ((ADC_CWR_HIGHTHRES_Msk & ((value) << ADC_CWR_HIGHTHRES_Pos)))
+/* -------- ADC_CGR : (ADC Offset: 0x48) Channel Gain Register -------- */
+#define ADC_CGR_GAIN0_Pos 0
+#define ADC_CGR_GAIN0_Msk (0x3u << ADC_CGR_GAIN0_Pos) /**< \brief (ADC_CGR) Gain for channel 0 */
+#define ADC_CGR_GAIN0(value) ((ADC_CGR_GAIN0_Msk & ((value) << ADC_CGR_GAIN0_Pos)))
+#define ADC_CGR_GAIN1_Pos 2
+#define ADC_CGR_GAIN1_Msk (0x3u << ADC_CGR_GAIN1_Pos) /**< \brief (ADC_CGR) Gain for channel 1 */
+#define ADC_CGR_GAIN1(value) ((ADC_CGR_GAIN1_Msk & ((value) << ADC_CGR_GAIN1_Pos)))
+#define ADC_CGR_GAIN2_Pos 4
+#define ADC_CGR_GAIN2_Msk (0x3u << ADC_CGR_GAIN2_Pos) /**< \brief (ADC_CGR) Gain for channel 2 */
+#define ADC_CGR_GAIN2(value) ((ADC_CGR_GAIN2_Msk & ((value) << ADC_CGR_GAIN2_Pos)))
+#define ADC_CGR_GAIN3_Pos 6
+#define ADC_CGR_GAIN3_Msk (0x3u << ADC_CGR_GAIN3_Pos) /**< \brief (ADC_CGR) Gain for channel 3 */
+#define ADC_CGR_GAIN3(value) ((ADC_CGR_GAIN3_Msk & ((value) << ADC_CGR_GAIN3_Pos)))
+#define ADC_CGR_GAIN4_Pos 8
+#define ADC_CGR_GAIN4_Msk (0x3u << ADC_CGR_GAIN4_Pos) /**< \brief (ADC_CGR) Gain for channel 4 */
+#define ADC_CGR_GAIN4(value) ((ADC_CGR_GAIN4_Msk & ((value) << ADC_CGR_GAIN4_Pos)))
+#define ADC_CGR_GAIN5_Pos 10
+#define ADC_CGR_GAIN5_Msk (0x3u << ADC_CGR_GAIN5_Pos) /**< \brief (ADC_CGR) Gain for channel 5 */
+#define ADC_CGR_GAIN5(value) ((ADC_CGR_GAIN5_Msk & ((value) << ADC_CGR_GAIN5_Pos)))
+#define ADC_CGR_GAIN6_Pos 12
+#define ADC_CGR_GAIN6_Msk (0x3u << ADC_CGR_GAIN6_Pos) /**< \brief (ADC_CGR) Gain for channel 6 */
+#define ADC_CGR_GAIN6(value) ((ADC_CGR_GAIN6_Msk & ((value) << ADC_CGR_GAIN6_Pos)))
+#define ADC_CGR_GAIN7_Pos 14
+#define ADC_CGR_GAIN7_Msk (0x3u << ADC_CGR_GAIN7_Pos) /**< \brief (ADC_CGR) Gain for channel 7 */
+#define ADC_CGR_GAIN7(value) ((ADC_CGR_GAIN7_Msk & ((value) << ADC_CGR_GAIN7_Pos)))
+#define ADC_CGR_GAIN8_Pos 16
+#define ADC_CGR_GAIN8_Msk (0x3u << ADC_CGR_GAIN8_Pos) /**< \brief (ADC_CGR) Gain for channel 8 */
+#define ADC_CGR_GAIN8(value) ((ADC_CGR_GAIN8_Msk & ((value) << ADC_CGR_GAIN8_Pos)))
+#define ADC_CGR_GAIN9_Pos 18
+#define ADC_CGR_GAIN9_Msk (0x3u << ADC_CGR_GAIN9_Pos) /**< \brief (ADC_CGR) Gain for channel 9 */
+#define ADC_CGR_GAIN9(value) ((ADC_CGR_GAIN9_Msk & ((value) << ADC_CGR_GAIN9_Pos)))
+#define ADC_CGR_GAIN10_Pos 20
+#define ADC_CGR_GAIN10_Msk (0x3u << ADC_CGR_GAIN10_Pos) /**< \brief (ADC_CGR) Gain for channel 10 */
+#define ADC_CGR_GAIN10(value) ((ADC_CGR_GAIN10_Msk & ((value) << ADC_CGR_GAIN10_Pos)))
+#define ADC_CGR_GAIN11_Pos 22
+#define ADC_CGR_GAIN11_Msk (0x3u << ADC_CGR_GAIN11_Pos) /**< \brief (ADC_CGR) Gain for channel 11 */
+#define ADC_CGR_GAIN11(value) ((ADC_CGR_GAIN11_Msk & ((value) << ADC_CGR_GAIN11_Pos)))
+#define ADC_CGR_GAIN12_Pos 24
+#define ADC_CGR_GAIN12_Msk (0x3u << ADC_CGR_GAIN12_Pos) /**< \brief (ADC_CGR) Gain for channel 12 */
+#define ADC_CGR_GAIN12(value) ((ADC_CGR_GAIN12_Msk & ((value) << ADC_CGR_GAIN12_Pos)))
+#define ADC_CGR_GAIN13_Pos 26
+#define ADC_CGR_GAIN13_Msk (0x3u << ADC_CGR_GAIN13_Pos) /**< \brief (ADC_CGR) Gain for channel 13 */
+#define ADC_CGR_GAIN13(value) ((ADC_CGR_GAIN13_Msk & ((value) << ADC_CGR_GAIN13_Pos)))
+#define ADC_CGR_GAIN14_Pos 28
+#define ADC_CGR_GAIN14_Msk (0x3u << ADC_CGR_GAIN14_Pos) /**< \brief (ADC_CGR) Gain for channel 14 */
+#define ADC_CGR_GAIN14(value) ((ADC_CGR_GAIN14_Msk & ((value) << ADC_CGR_GAIN14_Pos)))
+#define ADC_CGR_GAIN15_Pos 30
+#define ADC_CGR_GAIN15_Msk (0x3u << ADC_CGR_GAIN15_Pos) /**< \brief (ADC_CGR) Gain for channel 15 */
+#define ADC_CGR_GAIN15(value) ((ADC_CGR_GAIN15_Msk & ((value) << ADC_CGR_GAIN15_Pos)))
+/* -------- ADC_COR : (ADC Offset: 0x4C) Channel Offset Register -------- */
+#define ADC_COR_OFF0 (0x1u << 0) /**< \brief (ADC_COR) Offset for channel 0 */
+#define ADC_COR_OFF1 (0x1u << 1) /**< \brief (ADC_COR) Offset for channel 1 */
+#define ADC_COR_OFF2 (0x1u << 2) /**< \brief (ADC_COR) Offset for channel 2 */
+#define ADC_COR_OFF3 (0x1u << 3) /**< \brief (ADC_COR) Offset for channel 3 */
+#define ADC_COR_OFF4 (0x1u << 4) /**< \brief (ADC_COR) Offset for channel 4 */
+#define ADC_COR_OFF5 (0x1u << 5) /**< \brief (ADC_COR) Offset for channel 5 */
+#define ADC_COR_OFF6 (0x1u << 6) /**< \brief (ADC_COR) Offset for channel 6 */
+#define ADC_COR_OFF7 (0x1u << 7) /**< \brief (ADC_COR) Offset for channel 7 */
+#define ADC_COR_OFF8 (0x1u << 8) /**< \brief (ADC_COR) Offset for channel 8 */
+#define ADC_COR_OFF9 (0x1u << 9) /**< \brief (ADC_COR) Offset for channel 9 */
+#define ADC_COR_OFF10 (0x1u << 10) /**< \brief (ADC_COR) Offset for channel 10 */
+#define ADC_COR_OFF11 (0x1u << 11) /**< \brief (ADC_COR) Offset for channel 11 */
+#define ADC_COR_OFF12 (0x1u << 12) /**< \brief (ADC_COR) Offset for channel 12 */
+#define ADC_COR_OFF13 (0x1u << 13) /**< \brief (ADC_COR) Offset for channel 13 */
+#define ADC_COR_OFF14 (0x1u << 14) /**< \brief (ADC_COR) Offset for channel 14 */
+#define ADC_COR_OFF15 (0x1u << 15) /**< \brief (ADC_COR) Offset for channel 15 */
+#define ADC_COR_DIFF0 (0x1u << 16) /**< \brief (ADC_COR) Differential inputs for channel 0 */
+#define ADC_COR_DIFF1 (0x1u << 17) /**< \brief (ADC_COR) Differential inputs for channel 1 */
+#define ADC_COR_DIFF2 (0x1u << 18) /**< \brief (ADC_COR) Differential inputs for channel 2 */
+#define ADC_COR_DIFF3 (0x1u << 19) /**< \brief (ADC_COR) Differential inputs for channel 3 */
+#define ADC_COR_DIFF4 (0x1u << 20) /**< \brief (ADC_COR) Differential inputs for channel 4 */
+#define ADC_COR_DIFF5 (0x1u << 21) /**< \brief (ADC_COR) Differential inputs for channel 5 */
+#define ADC_COR_DIFF6 (0x1u << 22) /**< \brief (ADC_COR) Differential inputs for channel 6 */
+#define ADC_COR_DIFF7 (0x1u << 23) /**< \brief (ADC_COR) Differential inputs for channel 7 */
+#define ADC_COR_DIFF8 (0x1u << 24) /**< \brief (ADC_COR) Differential inputs for channel 8 */
+#define ADC_COR_DIFF9 (0x1u << 25) /**< \brief (ADC_COR) Differential inputs for channel 9 */
+#define ADC_COR_DIFF10 (0x1u << 26) /**< \brief (ADC_COR) Differential inputs for channel 10 */
+#define ADC_COR_DIFF11 (0x1u << 27) /**< \brief (ADC_COR) Differential inputs for channel 11 */
+#define ADC_COR_DIFF12 (0x1u << 28) /**< \brief (ADC_COR) Differential inputs for channel 12 */
+#define ADC_COR_DIFF13 (0x1u << 29) /**< \brief (ADC_COR) Differential inputs for channel 13 */
+#define ADC_COR_DIFF14 (0x1u << 30) /**< \brief (ADC_COR) Differential inputs for channel 14 */
+#define ADC_COR_DIFF15 (0x1u << 31) /**< \brief (ADC_COR) Differential inputs for channel 15 */
+/* -------- ADC_CDR[16] : (ADC Offset: 0x50) Channel Data Register -------- */
+#define ADC_CDR_DATA_Pos 0
+#define ADC_CDR_DATA_Msk (0x3ffu << ADC_CDR_DATA_Pos) /**< \brief (ADC_CDR[16]) Converted Data */
+/* -------- ADC_ACR : (ADC Offset: 0x94) Analog Control Register -------- */
+#define ADC_ACR_TSON (0x1u << 4) /**< \brief (ADC_ACR) Temperature Sensor On */
+#define ADC_ACR_IBCTL_Pos 8
+#define ADC_ACR_IBCTL_Msk (0x3u << ADC_ACR_IBCTL_Pos) /**< \brief (ADC_ACR) ADC Bias Current Control */
+#define ADC_ACR_IBCTL(value) ((ADC_ACR_IBCTL_Msk & ((value) << ADC_ACR_IBCTL_Pos)))
+/* -------- ADC_WPMR : (ADC Offset: 0xE4) Write Protect Mode Register -------- */
+#define ADC_WPMR_WPEN (0x1u << 0) /**< \brief (ADC_WPMR) Write Protect Enable */
+#define ADC_WPMR_WPKEY_Pos 8
+#define ADC_WPMR_WPKEY_Msk (0xffffffu << ADC_WPMR_WPKEY_Pos) /**< \brief (ADC_WPMR) Write Protect KEY */
+#define ADC_WPMR_WPKEY(value) ((ADC_WPMR_WPKEY_Msk & ((value) << ADC_WPMR_WPKEY_Pos)))
+/* -------- ADC_WPSR : (ADC Offset: 0xE8) Write Protect Status Register -------- */
+#define ADC_WPSR_WPVS (0x1u << 0) /**< \brief (ADC_WPSR) Write Protect Violation Status */
+#define ADC_WPSR_WPVSRC_Pos 8
+#define ADC_WPSR_WPVSRC_Msk (0xffffu << ADC_WPSR_WPVSRC_Pos) /**< \brief (ADC_WPSR) Write Protect Violation Source */
+/* -------- ADC_RPR : (ADC Offset: 0x100) Receive Pointer Register -------- */
+#define ADC_RPR_RXPTR_Pos 0
+#define ADC_RPR_RXPTR_Msk (0xffffffffu << ADC_RPR_RXPTR_Pos) /**< \brief (ADC_RPR) Receive Pointer Register */
+#define ADC_RPR_RXPTR(value) ((ADC_RPR_RXPTR_Msk & ((value) << ADC_RPR_RXPTR_Pos)))
+/* -------- ADC_RCR : (ADC Offset: 0x104) Receive Counter Register -------- */
+#define ADC_RCR_RXCTR_Pos 0
+#define ADC_RCR_RXCTR_Msk (0xffffu << ADC_RCR_RXCTR_Pos) /**< \brief (ADC_RCR) Receive Counter Register */
+#define ADC_RCR_RXCTR(value) ((ADC_RCR_RXCTR_Msk & ((value) << ADC_RCR_RXCTR_Pos)))
+/* -------- ADC_TPR : (ADC Offset: 0x108) Transmit Pointer Register -------- */
+#define ADC_TPR_TXPTR_Pos 0
+#define ADC_TPR_TXPTR_Msk (0xffffffffu << ADC_TPR_TXPTR_Pos) /**< \brief (ADC_TPR) Transmit Counter Register */
+#define ADC_TPR_TXPTR(value) ((ADC_TPR_TXPTR_Msk & ((value) << ADC_TPR_TXPTR_Pos)))
+/* -------- ADC_TCR : (ADC Offset: 0x10C) Transmit Counter Register -------- */
+#define ADC_TCR_TXCTR_Pos 0
+#define ADC_TCR_TXCTR_Msk (0xffffu << ADC_TCR_TXCTR_Pos) /**< \brief (ADC_TCR) Transmit Counter Register */
+#define ADC_TCR_TXCTR(value) ((ADC_TCR_TXCTR_Msk & ((value) << ADC_TCR_TXCTR_Pos)))
+/* -------- ADC_RNPR : (ADC Offset: 0x110) Receive Next Pointer Register -------- */
+#define ADC_RNPR_RXNPTR_Pos 0
+#define ADC_RNPR_RXNPTR_Msk (0xffffffffu << ADC_RNPR_RXNPTR_Pos) /**< \brief (ADC_RNPR) Receive Next Pointer */
+#define ADC_RNPR_RXNPTR(value) ((ADC_RNPR_RXNPTR_Msk & ((value) << ADC_RNPR_RXNPTR_Pos)))
+/* -------- ADC_RNCR : (ADC Offset: 0x114) Receive Next Counter Register -------- */
+#define ADC_RNCR_RXNCTR_Pos 0
+#define ADC_RNCR_RXNCTR_Msk (0xffffu << ADC_RNCR_RXNCTR_Pos) /**< \brief (ADC_RNCR) Receive Next Counter */
+#define ADC_RNCR_RXNCTR(value) ((ADC_RNCR_RXNCTR_Msk & ((value) << ADC_RNCR_RXNCTR_Pos)))
+/* -------- ADC_TNPR : (ADC Offset: 0x118) Transmit Next Pointer Register -------- */
+#define ADC_TNPR_TXNPTR_Pos 0
+#define ADC_TNPR_TXNPTR_Msk (0xffffffffu << ADC_TNPR_TXNPTR_Pos) /**< \brief (ADC_TNPR) Transmit Next Pointer */
+#define ADC_TNPR_TXNPTR(value) ((ADC_TNPR_TXNPTR_Msk & ((value) << ADC_TNPR_TXNPTR_Pos)))
+/* -------- ADC_TNCR : (ADC Offset: 0x11C) Transmit Next Counter Register -------- */
+#define ADC_TNCR_TXNCTR_Pos 0
+#define ADC_TNCR_TXNCTR_Msk (0xffffu << ADC_TNCR_TXNCTR_Pos) /**< \brief (ADC_TNCR) Transmit Counter Next */
+#define ADC_TNCR_TXNCTR(value) ((ADC_TNCR_TXNCTR_Msk & ((value) << ADC_TNCR_TXNCTR_Pos)))
+/* -------- ADC_PTCR : (ADC Offset: 0x120) Transfer Control Register -------- */
+#define ADC_PTCR_RXTEN (0x1u << 0) /**< \brief (ADC_PTCR) Receiver Transfer Enable */
+#define ADC_PTCR_RXTDIS (0x1u << 1) /**< \brief (ADC_PTCR) Receiver Transfer Disable */
+#define ADC_PTCR_TXTEN (0x1u << 8) /**< \brief (ADC_PTCR) Transmitter Transfer Enable */
+#define ADC_PTCR_TXTDIS (0x1u << 9) /**< \brief (ADC_PTCR) Transmitter Transfer Disable */
+/* -------- ADC_PTSR : (ADC Offset: 0x124) Transfer Status Register -------- */
+#define ADC_PTSR_RXTEN (0x1u << 0) /**< \brief (ADC_PTSR) Receiver Transfer Enable */
+#define ADC_PTSR_TXTEN (0x1u << 8) /**< \brief (ADC_PTSR) Transmitter Transfer Enable */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Chip Identifier */
+/* ============================================================================= */
+/** \addtogroup SAM3S_CHIPID Chip Identifier */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Chipid hardware registers */
+typedef struct {
+ RoReg CHIPID_CIDR; /**< \brief (Chipid Offset: 0x0) Chip ID Register */
+ RoReg CHIPID_EXID; /**< \brief (Chipid Offset: 0x4) Chip ID Extension Register */
+} Chipid;
+#endif /* __ASSEMBLY__ */
+/* -------- CHIPID_CIDR : (CHIPID Offset: 0x0) Chip ID Register -------- */
+#define CHIPID_CIDR_VERSION_Pos 0
+#define CHIPID_CIDR_VERSION_Msk (0x1fu << CHIPID_CIDR_VERSION_Pos) /**< \brief (CHIPID_CIDR) Version of the Device */
+#define CHIPID_CIDR_EPROC_Pos 5
+#define CHIPID_CIDR_EPROC_Msk (0x7u << CHIPID_CIDR_EPROC_Pos) /**< \brief (CHIPID_CIDR) Embedded Processor */
+#define CHIPID_CIDR_EPROC_ARM946ES (0x1u << 5) /**< \brief (CHIPID_CIDR) ARM946ES */
+#define CHIPID_CIDR_EPROC_ARM7TDMI (0x2u << 5) /**< \brief (CHIPID_CIDR) ARM7TDMI */
+#define CHIPID_CIDR_EPROC_CM3 (0x3u << 5) /**< \brief (CHIPID_CIDR) Cortex-M3 */
+#define CHIPID_CIDR_EPROC_ARM920T (0x4u << 5) /**< \brief (CHIPID_CIDR) ARM920T */
+#define CHIPID_CIDR_EPROC_ARM926EJS (0x5u << 5) /**< \brief (CHIPID_CIDR) ARM926EJS */
+#define CHIPID_CIDR_EPROC_CA5 (0x6u << 5) /**< \brief (CHIPID_CIDR) Cortex-A5 */
+#define CHIPID_CIDR_NVPSIZ_Pos 8
+#define CHIPID_CIDR_NVPSIZ_Msk (0xfu << CHIPID_CIDR_NVPSIZ_Pos) /**< \brief (CHIPID_CIDR) Nonvolatile Program Memory Size */
+#define CHIPID_CIDR_NVPSIZ_NONE (0x0u << 8) /**< \brief (CHIPID_CIDR) None */
+#define CHIPID_CIDR_NVPSIZ_8K (0x1u << 8) /**< \brief (CHIPID_CIDR) 8K bytes */
+#define CHIPID_CIDR_NVPSIZ_16K (0x2u << 8) /**< \brief (CHIPID_CIDR) 16K bytes */
+#define CHIPID_CIDR_NVPSIZ_32K (0x3u << 8) /**< \brief (CHIPID_CIDR) 32K bytes */
+#define CHIPID_CIDR_NVPSIZ_64K (0x5u << 8) /**< \brief (CHIPID_CIDR) 64K bytes */
+#define CHIPID_CIDR_NVPSIZ_128K (0x7u << 8) /**< \brief (CHIPID_CIDR) 128K bytes */
+#define CHIPID_CIDR_NVPSIZ_256K (0x9u << 8) /**< \brief (CHIPID_CIDR) 256K bytes */
+#define CHIPID_CIDR_NVPSIZ_512K (0xAu << 8) /**< \brief (CHIPID_CIDR) 512K bytes */
+#define CHIPID_CIDR_NVPSIZ_1024K (0xCu << 8) /**< \brief (CHIPID_CIDR) 1024K bytes */
+#define CHIPID_CIDR_NVPSIZ_2048K (0xEu << 8) /**< \brief (CHIPID_CIDR) 2048K bytes */
+#define CHIPID_CIDR_NVPSIZ2_Pos 12
+#define CHIPID_CIDR_NVPSIZ2_Msk (0xfu << CHIPID_CIDR_NVPSIZ2_Pos) /**< \brief (CHIPID_CIDR) */
+#define CHIPID_CIDR_NVPSIZ2_NONE (0x0u << 12) /**< \brief (CHIPID_CIDR) None */
+#define CHIPID_CIDR_NVPSIZ2_8K (0x1u << 12) /**< \brief (CHIPID_CIDR) 8K bytes */
+#define CHIPID_CIDR_NVPSIZ2_16K (0x2u << 12) /**< \brief (CHIPID_CIDR) 16K bytes */
+#define CHIPID_CIDR_NVPSIZ2_32K (0x3u << 12) /**< \brief (CHIPID_CIDR) 32K bytes */
+#define CHIPID_CIDR_NVPSIZ2_64K (0x5u << 12) /**< \brief (CHIPID_CIDR) 64K bytes */
+#define CHIPID_CIDR_NVPSIZ2_128K (0x7u << 12) /**< \brief (CHIPID_CIDR) 128K bytes */
+#define CHIPID_CIDR_NVPSIZ2_256K (0x9u << 12) /**< \brief (CHIPID_CIDR) 256K bytes */
+#define CHIPID_CIDR_NVPSIZ2_512K (0xAu << 12) /**< \brief (CHIPID_CIDR) 512K bytes */
+#define CHIPID_CIDR_NVPSIZ2_1024K (0xCu << 12) /**< \brief (CHIPID_CIDR) 1024K bytes */
+#define CHIPID_CIDR_NVPSIZ2_2048K (0xEu << 12) /**< \brief (CHIPID_CIDR) 2048K bytes */
+#define CHIPID_CIDR_SRAMSIZ_Pos 16
+#define CHIPID_CIDR_SRAMSIZ_Msk (0xfu << CHIPID_CIDR_SRAMSIZ_Pos) /**< \brief (CHIPID_CIDR) Internal SRAM Size */
+#define CHIPID_CIDR_SRAMSIZ_48K (0x0u << 16) /**< \brief (CHIPID_CIDR) 48K bytes */
+#define CHIPID_CIDR_SRAMSIZ_1K (0x1u << 16) /**< \brief (CHIPID_CIDR) 1K bytes */
+#define CHIPID_CIDR_SRAMSIZ_2K (0x2u << 16) /**< \brief (CHIPID_CIDR) 2K bytes */
+#define CHIPID_CIDR_SRAMSIZ_6K (0x3u << 16) /**< \brief (CHIPID_CIDR) 6K bytes */
+#define CHIPID_CIDR_SRAMSIZ_112K (0x4u << 16) /**< \brief (CHIPID_CIDR) 112K bytes */
+#define CHIPID_CIDR_SRAMSIZ_4K (0x5u << 16) /**< \brief (CHIPID_CIDR) 4K bytes */
+#define CHIPID_CIDR_SRAMSIZ_80K (0x6u << 16) /**< \brief (CHIPID_CIDR) 80K bytes */
+#define CHIPID_CIDR_SRAMSIZ_160K (0x7u << 16) /**< \brief (CHIPID_CIDR) 160K bytes */
+#define CHIPID_CIDR_SRAMSIZ_8K (0x8u << 16) /**< \brief (CHIPID_CIDR) 8K bytes */
+#define CHIPID_CIDR_SRAMSIZ_16K (0x9u << 16) /**< \brief (CHIPID_CIDR) 16K bytes */
+#define CHIPID_CIDR_SRAMSIZ_32K (0xAu << 16) /**< \brief (CHIPID_CIDR) 32K bytes */
+#define CHIPID_CIDR_SRAMSIZ_64K (0xBu << 16) /**< \brief (CHIPID_CIDR) 64K bytes */
+#define CHIPID_CIDR_SRAMSIZ_128K (0xCu << 16) /**< \brief (CHIPID_CIDR) 128K bytes */
+#define CHIPID_CIDR_SRAMSIZ_256K (0xDu << 16) /**< \brief (CHIPID_CIDR) 256K bytes */
+#define CHIPID_CIDR_SRAMSIZ_96K (0xEu << 16) /**< \brief (CHIPID_CIDR) 96K bytes */
+#define CHIPID_CIDR_SRAMSIZ_512K (0xFu << 16) /**< \brief (CHIPID_CIDR) 512K bytes */
+#define CHIPID_CIDR_ARCH_Pos 20
+#define CHIPID_CIDR_ARCH_Msk (0xffu << CHIPID_CIDR_ARCH_Pos) /**< \brief (CHIPID_CIDR) Architecture Identifier */
+#define CHIPID_CIDR_ARCH_AT91SAM9xx (0x19u << 20) /**< \brief (CHIPID_CIDR) AT91SAM9xx Series */
+#define CHIPID_CIDR_ARCH_AT91SAM9XExx (0x29u << 20) /**< \brief (CHIPID_CIDR) AT91SAM9XExx Series */
+#define CHIPID_CIDR_ARCH_AT91x34 (0x34u << 20) /**< \brief (CHIPID_CIDR) AT91x34 Series */
+#define CHIPID_CIDR_ARCH_CAP7 (0x37u << 20) /**< \brief (CHIPID_CIDR) CAP7 Series */
+#define CHIPID_CIDR_ARCH_CAP9 (0x39u << 20) /**< \brief (CHIPID_CIDR) CAP9 Series */
+#define CHIPID_CIDR_ARCH_CAP11 (0x3Bu << 20) /**< \brief (CHIPID_CIDR) CAP11 Series */
+#define CHIPID_CIDR_ARCH_AT91x40 (0x40u << 20) /**< \brief (CHIPID_CIDR) AT91x40 Series */
+#define CHIPID_CIDR_ARCH_AT91x42 (0x42u << 20) /**< \brief (CHIPID_CIDR) AT91x42 Series */
+#define CHIPID_CIDR_ARCH_AT91x55 (0x55u << 20) /**< \brief (CHIPID_CIDR) AT91x55 Series */
+#define CHIPID_CIDR_ARCH_AT91SAM7Axx (0x60u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7Axx Series */
+#define CHIPID_CIDR_ARCH_AT91SAM7AQxx (0x61u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7AQxx Series */
+#define CHIPID_CIDR_ARCH_AT91x63 (0x63u << 20) /**< \brief (CHIPID_CIDR) AT91x63 Series */
+#define CHIPID_CIDR_ARCH_AT91SAM7Sxx (0x70u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7Sxx Series */
+#define CHIPID_CIDR_ARCH_AT91SAM7XCxx (0x71u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7XCxx Series */
+#define CHIPID_CIDR_ARCH_AT91SAM7SExx (0x72u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7SExx Series */
+#define CHIPID_CIDR_ARCH_AT91SAM7Lxx (0x73u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7Lxx Series */
+#define CHIPID_CIDR_ARCH_AT91SAM7Xxx (0x75u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7Xxx Series */
+#define CHIPID_CIDR_ARCH_AT91SAM7SLxx (0x76u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7SLxx Series */
+#define CHIPID_CIDR_ARCH_SAM3UxC (0x80u << 20) /**< \brief (CHIPID_CIDR) SAM3UxC Series (100-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3UxE (0x81u << 20) /**< \brief (CHIPID_CIDR) SAM3UxE Series (144-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3AxC (0x83u << 20) /**< \brief (CHIPID_CIDR) SAM3AxC Series (100-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3XxC (0x84u << 20) /**< \brief (CHIPID_CIDR) SAM3XxC Series (100-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3XxE (0x85u << 20) /**< \brief (CHIPID_CIDR) SAM3XxE Series (144-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3XxG (0x86u << 20) /**< \brief (CHIPID_CIDR) SAM3XxG Series (208/217-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3SxA (0x88u << 20) /**< \brief (CHIPID_CIDR) SAM3SxA Series (48-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3SxB (0x89u << 20) /**< \brief (CHIPID_CIDR) SAM3SxB Series (64-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3SxC (0x8Au << 20) /**< \brief (CHIPID_CIDR) SAM3SxC Series (100-pin version) */
+#define CHIPID_CIDR_ARCH_AT91x92 (0x92u << 20) /**< \brief (CHIPID_CIDR) AT91x92 Series */
+#define CHIPID_CIDR_ARCH_SAM3NxA (0x93u << 20) /**< \brief (CHIPID_CIDR) SAM3NxA Series (48-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3NxB (0x94u << 20) /**< \brief (CHIPID_CIDR) SAM3NxB Series (64-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3NxC (0x95u << 20) /**< \brief (CHIPID_CIDR) SAM3NxC Series (100-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3SDxA (0x98u << 20) /**< \brief (CHIPID_CIDR) SAM3SDxA Series (48-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3SDxB (0x99u << 20) /**< \brief (CHIPID_CIDR) SAM3SDxB Series (64-pin version) */
+#define CHIPID_CIDR_ARCH_SAM3SDxC (0x9Au << 20) /**< \brief (CHIPID_CIDR) SAM3SDxC Series (100-pin version) */
+#define CHIPID_CIDR_ARCH_SAM5A (0xA5u << 20) /**< \brief (CHIPID_CIDR) SAM5A */
+#define CHIPID_CIDR_ARCH_AT75Cxx (0xF0u << 20) /**< \brief (CHIPID_CIDR) AT75Cxx Series */
+#define CHIPID_CIDR_NVPTYP_Pos 28
+#define CHIPID_CIDR_NVPTYP_Msk (0x7u << CHIPID_CIDR_NVPTYP_Pos) /**< \brief (CHIPID_CIDR) Nonvolatile Program Memory Type */
+#define CHIPID_CIDR_NVPTYP_ROM (0x0u << 28) /**< \brief (CHIPID_CIDR) ROM */
+#define CHIPID_CIDR_NVPTYP_ROMLESS (0x1u << 28) /**< \brief (CHIPID_CIDR) ROMless or on-chip Flash */
+#define CHIPID_CIDR_NVPTYP_FLASH (0x2u << 28) /**< \brief (CHIPID_CIDR) Embedded Flash Memory */
+#define CHIPID_CIDR_NVPTYP_ROM_FLASH (0x3u << 28) /**< \brief (CHIPID_CIDR) ROM and Embedded Flash MemoryNVPSIZ is ROM size NVPSIZ2 is Flash size */
+#define CHIPID_CIDR_NVPTYP_SRAM (0x4u << 28) /**< \brief (CHIPID_CIDR) SRAM emulating ROM */
+#define CHIPID_CIDR_EXT (0x1u << 31) /**< \brief (CHIPID_CIDR) Extension Flag */
+/* -------- CHIPID_EXID : (CHIPID Offset: 0x4) Chip ID Extension Register -------- */
+#define CHIPID_EXID_EXID_Pos 0
+#define CHIPID_EXID_EXID_Msk (0xffffffffu << CHIPID_EXID_EXID_Pos) /**< \brief (CHIPID_EXID) Chip ID Extension */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Cyclic Redundancy Check Calculation Unit */
+/* ============================================================================= */
+/** \addtogroup SAM3S_CRCCU Cyclic Redundancy Check Calculation Unit */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Crccu hardware registers */
+typedef struct {
+ RwReg CRCCU_DSCR; /**< \brief (Crccu Offset: 0x00000000) CRCCU Descriptor Base Register */
+ RwReg Reserved1[1];
+ WoReg CRCCU_DMA_EN; /**< \brief (Crccu Offset: 0x00000008) CRCCU DMA Enable Register */
+ WoReg CRCCU_DMA_DIS; /**< \brief (Crccu Offset: 0x0000000C) CRCCU DMA Disable Register */
+ RoReg CRCCU_DMA_SR; /**< \brief (Crccu Offset: 0x00000010) CRCCU DMA Status Register */
+ WoReg CRCCU_DMA_IER; /**< \brief (Crccu Offset: 0x00000014) CRCCU DMA Interrupt Enable Register */
+ WoReg CRCCU_DMA_IDR; /**< \brief (Crccu Offset: 0x00000018) CRCCU DMA Interrupt Disable Register */
+ RoReg CRCCU_DMA_IMR; /**< \brief (Crccu Offset: 0x0000001C) CRCCU DMA Interrupt Mask Register */
+ RoReg CRCCU_DMA_ISR; /**< \brief (Crccu Offset: 0x00000020) CRCCU DMA Interrupt Status Register */
+ RwReg Reserved2[4];
+ WoReg CRCCU_CR; /**< \brief (Crccu Offset: 0x00000034) CRCCU Control Register */
+ RwReg CRCCU_MR; /**< \brief (Crccu Offset: 0x00000038) CRCCU Mode Register */
+ RoReg CRCCU_SR; /**< \brief (Crccu Offset: 0x0000003C) CRCCU Status Register */
+ WoReg CRCCU_IER; /**< \brief (Crccu Offset: 0x00000040) CRCCU Interrupt Enable Register */
+ WoReg CRCCU_IDR; /**< \brief (Crccu Offset: 0x00000044) CRCCU Interrupt Disable Register */
+ RoReg CRCCU_IMR; /**< \brief (Crccu Offset: 0x00000048) CRCCU Interrupt Mask Register */
+ RoReg CRCCU_ISR; /**< \brief (Crccu Offset: 0x0000004C) CRCCU Interrupt Status Register */
+} Crccu;
+#endif /* __ASSEMBLY__ */
+/* -------- CRCCU_DSCR : (CRCCU Offset: 0x00000000) CRCCU Descriptor Base Register -------- */
+#define CRCCU_DSCR_DSCR_Pos 9
+#define CRCCU_DSCR_DSCR_Msk (0x7fffffu << CRCCU_DSCR_DSCR_Pos) /**< \brief (CRCCU_DSCR) Descriptor Base Address */
+#define CRCCU_DSCR_DSCR(value) ((CRCCU_DSCR_DSCR_Msk & ((value) << CRCCU_DSCR_DSCR_Pos)))
+/* -------- CRCCU_DMA_EN : (CRCCU Offset: 0x00000008) CRCCU DMA Enable Register -------- */
+#define CRCCU_DMA_EN_DMAEN (0x1u << 0) /**< \brief (CRCCU_DMA_EN) DMA Enable Register */
+/* -------- CRCCU_DMA_DIS : (CRCCU Offset: 0x0000000C) CRCCU DMA Disable Register -------- */
+#define CRCCU_DMA_DIS_DMADIS (0x1u << 0) /**< \brief (CRCCU_DMA_DIS) DMA Disable Register */
+/* -------- CRCCU_DMA_SR : (CRCCU Offset: 0x00000010) CRCCU DMA Status Register -------- */
+#define CRCCU_DMA_SR_DMASR (0x1u << 0) /**< \brief (CRCCU_DMA_SR) DMA Status Register */
+/* -------- CRCCU_DMA_IER : (CRCCU Offset: 0x00000014) CRCCU DMA Interrupt Enable Register -------- */
+#define CRCCU_DMA_IER_DMAIER (0x1u << 0) /**< \brief (CRCCU_DMA_IER) Interrupt Enable register */
+/* -------- CRCCU_DMA_IDR : (CRCCU Offset: 0x00000018) CRCCU DMA Interrupt Disable Register -------- */
+#define CRCCU_DMA_IDR_DMAIDR (0x1u << 0) /**< \brief (CRCCU_DMA_IDR) Interrupt Disable register */
+/* -------- CRCCU_DMA_IMR : (CRCCU Offset: 0x0000001C) CRCCU DMA Interrupt Mask Register -------- */
+#define CRCCU_DMA_IMR_DMAIMR (0x1u << 0) /**< \brief (CRCCU_DMA_IMR) Interrupt Mask Register */
+/* -------- CRCCU_DMA_ISR : (CRCCU Offset: 0x00000020) CRCCU DMA Interrupt Status Register -------- */
+#define CRCCU_DMA_ISR_DMAISR (0x1u << 0) /**< \brief (CRCCU_DMA_ISR) Interrupt Status register */
+/* -------- CRCCU_CR : (CRCCU Offset: 0x00000034) CRCCU Control Register -------- */
+#define CRCCU_CR_RESET (0x1u << 0) /**< \brief (CRCCU_CR) CRC Computation Reset */
+/* -------- CRCCU_MR : (CRCCU Offset: 0x00000038) CRCCU Mode Register -------- */
+#define CRCCU_MR_ENABLE (0x1u << 0) /**< \brief (CRCCU_MR) CRC Enable */
+#define CRCCU_MR_COMPARE (0x1u << 1) /**< \brief (CRCCU_MR) CRC Compare */
+#define CRCCU_MR_PTYPE_Pos 2
+#define CRCCU_MR_PTYPE_Msk (0x3u << CRCCU_MR_PTYPE_Pos) /**< \brief (CRCCU_MR) Primitive Polynomial */
+#define CRCCU_MR_PTYPE_CCIT8023 (0x0u << 2) /**< \brief (CRCCU_MR) Polynom 0x04C11DB7 */
+#define CRCCU_MR_PTYPE_CASTAGNOLI (0x1u << 2) /**< \brief (CRCCU_MR) Polynom 0x1EDC6F41 */
+#define CRCCU_MR_PTYPE_CCIT16 (0x2u << 2) /**< \brief (CRCCU_MR) Polynom 0x1021 */
+#define CRCCU_MR_DIVIDER_Pos 4
+#define CRCCU_MR_DIVIDER_Msk (0xfu << CRCCU_MR_DIVIDER_Pos) /**< \brief (CRCCU_MR) Request Divider */
+#define CRCCU_MR_DIVIDER(value) ((CRCCU_MR_DIVIDER_Msk & ((value) << CRCCU_MR_DIVIDER_Pos)))
+/* -------- CRCCU_SR : (CRCCU Offset: 0x0000003C) CRCCU Status Register -------- */
+#define CRCCU_SR_CRC_Pos 0
+#define CRCCU_SR_CRC_Msk (0xffffffffu << CRCCU_SR_CRC_Pos) /**< \brief (CRCCU_SR) Cyclic Redundancy Check Value */
+/* -------- CRCCU_IER : (CRCCU Offset: 0x00000040) CRCCU Interrupt Enable Register -------- */
+#define CRCCU_IER_ERRIER (0x1u << 0) /**< \brief (CRCCU_IER) CRC Error Interrupt Enable */
+/* -------- CRCCU_IDR : (CRCCU Offset: 0x00000044) CRCCU Interrupt Disable Register -------- */
+#define CRCCU_IDR_ERRIDR (0x1u << 0) /**< \brief (CRCCU_IDR) CRC Error Interrupt Disable */
+/* -------- CRCCU_IMR : (CRCCU Offset: 0x00000048) CRCCU Interrupt Mask Register -------- */
+#define CRCCU_IMR_ERRIMR (0x1u << 0) /**< \brief (CRCCU_IMR) CRC Error Interrupt Mask */
+/* -------- CRCCU_ISR : (CRCCU Offset: 0x0000004C) CRCCU Interrupt Status Register -------- */
+#define CRCCU_ISR_ERRISR (0x1u << 0) /**< \brief (CRCCU_ISR) CRC Error Interrupt Status */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Digital-to-Analog Converter Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_DACC Digital-to-Analog Converter Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Dacc hardware registers */
+typedef struct {
+ WoReg DACC_CR; /**< \brief (Dacc Offset: 0x00) Control Register */
+ RwReg DACC_MR; /**< \brief (Dacc Offset: 0x04) Mode Register */
+ RwReg Reserved1[2];
+ WoReg DACC_CHER; /**< \brief (Dacc Offset: 0x10) Channel Enable Register */
+ WoReg DACC_CHDR; /**< \brief (Dacc Offset: 0x14) Channel Disable Register */
+ RoReg DACC_CHSR; /**< \brief (Dacc Offset: 0x18) Channel Status Register */
+ RwReg Reserved2[1];
+ WoReg DACC_CDR; /**< \brief (Dacc Offset: 0x20) Conversion Data Register */
+ WoReg DACC_IER; /**< \brief (Dacc Offset: 0x24) Interrupt Enable Register */
+ WoReg DACC_IDR; /**< \brief (Dacc Offset: 0x28) Interrupt Disable Register */
+ RoReg DACC_IMR; /**< \brief (Dacc Offset: 0x2C) Interrupt Mask Register */
+ RoReg DACC_ISR; /**< \brief (Dacc Offset: 0x30) Interrupt Status Register */
+ RwReg Reserved3[24];
+ RwReg DACC_ACR; /**< \brief (Dacc Offset: 0x94) Analog Current Register */
+ RwReg Reserved4[19];
+ RwReg DACC_WPMR; /**< \brief (Dacc Offset: 0xE4) Write Protect Mode register */
+ RoReg DACC_WPSR; /**< \brief (Dacc Offset: 0xE8) Write Protect Status register */
+ RwReg Reserved5[5];
+ RwReg DACC_RPR; /**< \brief (Dacc Offset: 0x100) Receive Pointer Register */
+ RwReg DACC_RCR; /**< \brief (Dacc Offset: 0x104) Receive Counter Register */
+ RwReg DACC_TPR; /**< \brief (Dacc Offset: 0x108) Transmit Pointer Register */
+ RwReg DACC_TCR; /**< \brief (Dacc Offset: 0x10C) Transmit Counter Register */
+ RwReg DACC_RNPR; /**< \brief (Dacc Offset: 0x110) Receive Next Pointer Register */
+ RwReg DACC_RNCR; /**< \brief (Dacc Offset: 0x114) Receive Next Counter Register */
+ RwReg DACC_TNPR; /**< \brief (Dacc Offset: 0x118) Transmit Next Pointer Register */
+ RwReg DACC_TNCR; /**< \brief (Dacc Offset: 0x11C) Transmit Next Counter Register */
+ WoReg DACC_PTCR; /**< \brief (Dacc Offset: 0x120) Transfer Control Register */
+ RoReg DACC_PTSR; /**< \brief (Dacc Offset: 0x124) Transfer Status Register */
+} Dacc;
+#endif /* __ASSEMBLY__ */
+/* -------- DACC_CR : (DACC Offset: 0x00) Control Register -------- */
+#define DACC_CR_SWRST (0x1u << 0) /**< \brief (DACC_CR) Software Reset */
+/* -------- DACC_MR : (DACC Offset: 0x04) Mode Register -------- */
+#define DACC_MR_TRGEN (0x1u << 0) /**< \brief (DACC_MR) Trigger Enable */
+#define DACC_MR_TRGEN_DIS (0x0u << 0) /**< \brief (DACC_MR) External trigger mode disabled. DACC in free running mode. */
+#define DACC_MR_TRGEN_EN (0x1u << 0) /**< \brief (DACC_MR) External trigger mode enabled. */
+#define DACC_MR_TRGSEL_Pos 1
+#define DACC_MR_TRGSEL_Msk (0x7u << DACC_MR_TRGSEL_Pos) /**< \brief (DACC_MR) Trigger Selection */
+#define DACC_MR_TRGSEL(value) ((DACC_MR_TRGSEL_Msk & ((value) << DACC_MR_TRGSEL_Pos)))
+#define DACC_MR_WORD (0x1u << 4) /**< \brief (DACC_MR) Word Transfer */
+#define DACC_MR_WORD_HALF (0x0u << 4) /**< \brief (DACC_MR) Half-Word transfer */
+#define DACC_MR_WORD_WORD (0x1u << 4) /**< \brief (DACC_MR) Word Transfer */
+#define DACC_MR_SLEEP (0x1u << 5) /**< \brief (DACC_MR) Sleep Mode */
+#define DACC_MR_FASTWKUP (0x1u << 6) /**< \brief (DACC_MR) Fast Wake up Mode */
+#define DACC_MR_REFRESH_Pos 8
+#define DACC_MR_REFRESH_Msk (0xffu << DACC_MR_REFRESH_Pos) /**< \brief (DACC_MR) Refresh Period */
+#define DACC_MR_REFRESH(value) ((DACC_MR_REFRESH_Msk & ((value) << DACC_MR_REFRESH_Pos)))
+#define DACC_MR_USER_SEL_Pos 16
+#define DACC_MR_USER_SEL_Msk (0x3u << DACC_MR_USER_SEL_Pos) /**< \brief (DACC_MR) User Channel Selection */
+#define DACC_MR_USER_SEL_CHANNEL0 (0x0u << 16) /**< \brief (DACC_MR) Channel 0 */
+#define DACC_MR_USER_SEL_CHANNEL1 (0x1u << 16) /**< \brief (DACC_MR) Channel 1 */
+#define DACC_MR_TAG (0x1u << 20) /**< \brief (DACC_MR) Tag Selection Mode */
+#define DACC_MR_TAG_DIS (0x0u << 20) /**< \brief (DACC_MR) Tag selection mode disabled. Using USER_SEL to select the channel for the conversion */
+#define DACC_MR_TAG_EN (0x1u << 20) /**< \brief (DACC_MR) Tag selection mode enabled */
+#define DACC_MR_MAXS (0x1u << 21) /**< \brief (DACC_MR) Max Speed Mode */
+#define DACC_MR_STARTUP_Pos 24
+#define DACC_MR_STARTUP_Msk (0x3fu << DACC_MR_STARTUP_Pos) /**< \brief (DACC_MR) Startup Time Selection */
+#define DACC_MR_STARTUP_0 (0x0u << 24) /**< \brief (DACC_MR) 0 periods of DACClock */
+#define DACC_MR_STARTUP_8 (0x1u << 24) /**< \brief (DACC_MR) 8 periods of DACClock */
+#define DACC_MR_STARTUP_16 (0x2u << 24) /**< \brief (DACC_MR) 16 periods of DACClock */
+#define DACC_MR_STARTUP_24 (0x3u << 24) /**< \brief (DACC_MR) 24 periods of DACClock */
+#define DACC_MR_STARTUP_64 (0x4u << 24) /**< \brief (DACC_MR) 64 periods of DACClock */
+#define DACC_MR_STARTUP_80 (0x5u << 24) /**< \brief (DACC_MR) 80 periods of DACClock */
+#define DACC_MR_STARTUP_96 (0x6u << 24) /**< \brief (DACC_MR) 96 periods of DACClock */
+#define DACC_MR_STARTUP_112 (0x7u << 24) /**< \brief (DACC_MR) 112 periods of DACClock */
+#define DACC_MR_STARTUP_512 (0x8u << 24) /**< \brief (DACC_MR) 512 periods of DACClock */
+#define DACC_MR_STARTUP_576 (0x9u << 24) /**< \brief (DACC_MR) 576 periods of DACClock */
+#define DACC_MR_STARTUP_640 (0xAu << 24) /**< \brief (DACC_MR) 640 periods of DACClock */
+#define DACC_MR_STARTUP_704 (0xBu << 24) /**< \brief (DACC_MR) 704 periods of DACClock */
+#define DACC_MR_STARTUP_768 (0xCu << 24) /**< \brief (DACC_MR) 768 periods of DACClock */
+#define DACC_MR_STARTUP_832 (0xDu << 24) /**< \brief (DACC_MR) 832 periods of DACClock */
+#define DACC_MR_STARTUP_896 (0xEu << 24) /**< \brief (DACC_MR) 896 periods of DACClock */
+#define DACC_MR_STARTUP_960 (0xFu << 24) /**< \brief (DACC_MR) 960 periods of DACClock */
+/* -------- DACC_CHER : (DACC Offset: 0x10) Channel Enable Register -------- */
+#define DACC_CHER_CH0 (0x1u << 0) /**< \brief (DACC_CHER) Channel 0 Enable */
+#define DACC_CHER_CH1 (0x1u << 1) /**< \brief (DACC_CHER) Channel 1 Enable */
+/* -------- DACC_CHDR : (DACC Offset: 0x14) Channel Disable Register -------- */
+#define DACC_CHDR_CH0 (0x1u << 0) /**< \brief (DACC_CHDR) Channel 0 Disable */
+#define DACC_CHDR_CH1 (0x1u << 1) /**< \brief (DACC_CHDR) Channel 1 Disable */
+/* -------- DACC_CHSR : (DACC Offset: 0x18) Channel Status Register -------- */
+#define DACC_CHSR_CH0 (0x1u << 0) /**< \brief (DACC_CHSR) Channel 0 Status */
+#define DACC_CHSR_CH1 (0x1u << 1) /**< \brief (DACC_CHSR) Channel 1 Status */
+/* -------- DACC_CDR : (DACC Offset: 0x20) Conversion Data Register -------- */
+#define DACC_CDR_DATA_Pos 0
+#define DACC_CDR_DATA_Msk (0xffffffffu << DACC_CDR_DATA_Pos) /**< \brief (DACC_CDR) Data to Convert */
+#define DACC_CDR_DATA(value) ((DACC_CDR_DATA_Msk & ((value) << DACC_CDR_DATA_Pos)))
+/* -------- DACC_IER : (DACC Offset: 0x24) Interrupt Enable Register -------- */
+#define DACC_IER_TXRDY (0x1u << 0) /**< \brief (DACC_IER) Transmit Ready Interrupt Enable */
+#define DACC_IER_EOC (0x1u << 1) /**< \brief (DACC_IER) End of Conversion Interrupt Enable */
+#define DACC_IER_ENDTX (0x1u << 2) /**< \brief (DACC_IER) End of Transmit Buffer Interrupt Enable */
+#define DACC_IER_TXBUFE (0x1u << 3) /**< \brief (DACC_IER) Transmit Buffer Empty Interrupt Enable */
+/* -------- DACC_IDR : (DACC Offset: 0x28) Interrupt Disable Register -------- */
+#define DACC_IDR_TXRDY (0x1u << 0) /**< \brief (DACC_IDR) Transmit Ready Interrupt Disable. */
+#define DACC_IDR_EOC (0x1u << 1) /**< \brief (DACC_IDR) End of Conversion Interrupt Disable */
+#define DACC_IDR_ENDTX (0x1u << 2) /**< \brief (DACC_IDR) End of Transmit Buffer Interrupt Disable */
+#define DACC_IDR_TXBUFE (0x1u << 3) /**< \brief (DACC_IDR) Transmit Buffer Empty Interrupt Disable */
+/* -------- DACC_IMR : (DACC Offset: 0x2C) Interrupt Mask Register -------- */
+#define DACC_IMR_TXRDY (0x1u << 0) /**< \brief (DACC_IMR) Transmit Ready Interrupt Mask */
+#define DACC_IMR_EOC (0x1u << 1) /**< \brief (DACC_IMR) End of Conversion Interrupt Mask */
+#define DACC_IMR_ENDTX (0x1u << 2) /**< \brief (DACC_IMR) End of Transmit Buffer Interrupt Mask */
+#define DACC_IMR_TXBUFE (0x1u << 3) /**< \brief (DACC_IMR) Transmit Buffer Empty Interrupt Mask */
+/* -------- DACC_ISR : (DACC Offset: 0x30) Interrupt Status Register -------- */
+#define DACC_ISR_TXRDY (0x1u << 0) /**< \brief (DACC_ISR) Transmit Ready Interrupt Flag */
+#define DACC_ISR_EOC (0x1u << 1) /**< \brief (DACC_ISR) End of Conversion Interrupt Flag */
+#define DACC_ISR_ENDTX (0x1u << 2) /**< \brief (DACC_ISR) End of DMA Interrupt Flag */
+#define DACC_ISR_TXBUFE (0x1u << 3) /**< \brief (DACC_ISR) Transmit Buffer Empty */
+/* -------- DACC_ACR : (DACC Offset: 0x94) Analog Current Register -------- */
+#define DACC_ACR_IBCTLCH0_Pos 0
+#define DACC_ACR_IBCTLCH0_Msk (0x3u << DACC_ACR_IBCTLCH0_Pos) /**< \brief (DACC_ACR) Analog Output Current Control */
+#define DACC_ACR_IBCTLCH0(value) ((DACC_ACR_IBCTLCH0_Msk & ((value) << DACC_ACR_IBCTLCH0_Pos)))
+#define DACC_ACR_IBCTLCH1_Pos 2
+#define DACC_ACR_IBCTLCH1_Msk (0x3u << DACC_ACR_IBCTLCH1_Pos) /**< \brief (DACC_ACR) Analog Output Current Control */
+#define DACC_ACR_IBCTLCH1(value) ((DACC_ACR_IBCTLCH1_Msk & ((value) << DACC_ACR_IBCTLCH1_Pos)))
+#define DACC_ACR_IBCTLDACCORE_Pos 8
+#define DACC_ACR_IBCTLDACCORE_Msk (0x3u << DACC_ACR_IBCTLDACCORE_Pos) /**< \brief (DACC_ACR) Bias Current Control for DAC Core */
+#define DACC_ACR_IBCTLDACCORE(value) ((DACC_ACR_IBCTLDACCORE_Msk & ((value) << DACC_ACR_IBCTLDACCORE_Pos)))
+/* -------- DACC_WPMR : (DACC Offset: 0xE4) Write Protect Mode register -------- */
+#define DACC_WPMR_WPEN (0x1u << 0) /**< \brief (DACC_WPMR) Write Protect Enable */
+#define DACC_WPMR_WPKEY_Pos 8
+#define DACC_WPMR_WPKEY_Msk (0xffffffu << DACC_WPMR_WPKEY_Pos) /**< \brief (DACC_WPMR) Write Protect KEY */
+#define DACC_WPMR_WPKEY(value) ((DACC_WPMR_WPKEY_Msk & ((value) << DACC_WPMR_WPKEY_Pos)))
+/* -------- DACC_WPSR : (DACC Offset: 0xE8) Write Protect Status register -------- */
+#define DACC_WPSR_WPROTERR (0x1u << 0) /**< \brief (DACC_WPSR) Write protection error */
+#define DACC_WPSR_WPROTADDR_Pos 8
+#define DACC_WPSR_WPROTADDR_Msk (0xffu << DACC_WPSR_WPROTADDR_Pos) /**< \brief (DACC_WPSR) Write protection error address */
+/* -------- DACC_RPR : (DACC Offset: 0x100) Receive Pointer Register -------- */
+#define DACC_RPR_RXPTR_Pos 0
+#define DACC_RPR_RXPTR_Msk (0xffffffffu << DACC_RPR_RXPTR_Pos) /**< \brief (DACC_RPR) Receive Pointer Register */
+#define DACC_RPR_RXPTR(value) ((DACC_RPR_RXPTR_Msk & ((value) << DACC_RPR_RXPTR_Pos)))
+/* -------- DACC_RCR : (DACC Offset: 0x104) Receive Counter Register -------- */
+#define DACC_RCR_RXCTR_Pos 0
+#define DACC_RCR_RXCTR_Msk (0xffffu << DACC_RCR_RXCTR_Pos) /**< \brief (DACC_RCR) Receive Counter Register */
+#define DACC_RCR_RXCTR(value) ((DACC_RCR_RXCTR_Msk & ((value) << DACC_RCR_RXCTR_Pos)))
+/* -------- DACC_TPR : (DACC Offset: 0x108) Transmit Pointer Register -------- */
+#define DACC_TPR_TXPTR_Pos 0
+#define DACC_TPR_TXPTR_Msk (0xffffffffu << DACC_TPR_TXPTR_Pos) /**< \brief (DACC_TPR) Transmit Counter Register */
+#define DACC_TPR_TXPTR(value) ((DACC_TPR_TXPTR_Msk & ((value) << DACC_TPR_TXPTR_Pos)))
+/* -------- DACC_TCR : (DACC Offset: 0x10C) Transmit Counter Register -------- */
+#define DACC_TCR_TXCTR_Pos 0
+#define DACC_TCR_TXCTR_Msk (0xffffu << DACC_TCR_TXCTR_Pos) /**< \brief (DACC_TCR) Transmit Counter Register */
+#define DACC_TCR_TXCTR(value) ((DACC_TCR_TXCTR_Msk & ((value) << DACC_TCR_TXCTR_Pos)))
+/* -------- DACC_RNPR : (DACC Offset: 0x110) Receive Next Pointer Register -------- */
+#define DACC_RNPR_RXNPTR_Pos 0
+#define DACC_RNPR_RXNPTR_Msk (0xffffffffu << DACC_RNPR_RXNPTR_Pos) /**< \brief (DACC_RNPR) Receive Next Pointer */
+#define DACC_RNPR_RXNPTR(value) ((DACC_RNPR_RXNPTR_Msk & ((value) << DACC_RNPR_RXNPTR_Pos)))
+/* -------- DACC_RNCR : (DACC Offset: 0x114) Receive Next Counter Register -------- */
+#define DACC_RNCR_RXNCTR_Pos 0
+#define DACC_RNCR_RXNCTR_Msk (0xffffu << DACC_RNCR_RXNCTR_Pos) /**< \brief (DACC_RNCR) Receive Next Counter */
+#define DACC_RNCR_RXNCTR(value) ((DACC_RNCR_RXNCTR_Msk & ((value) << DACC_RNCR_RXNCTR_Pos)))
+/* -------- DACC_TNPR : (DACC Offset: 0x118) Transmit Next Pointer Register -------- */
+#define DACC_TNPR_TXNPTR_Pos 0
+#define DACC_TNPR_TXNPTR_Msk (0xffffffffu << DACC_TNPR_TXNPTR_Pos) /**< \brief (DACC_TNPR) Transmit Next Pointer */
+#define DACC_TNPR_TXNPTR(value) ((DACC_TNPR_TXNPTR_Msk & ((value) << DACC_TNPR_TXNPTR_Pos)))
+/* -------- DACC_TNCR : (DACC Offset: 0x11C) Transmit Next Counter Register -------- */
+#define DACC_TNCR_TXNCTR_Pos 0
+#define DACC_TNCR_TXNCTR_Msk (0xffffu << DACC_TNCR_TXNCTR_Pos) /**< \brief (DACC_TNCR) Transmit Counter Next */
+#define DACC_TNCR_TXNCTR(value) ((DACC_TNCR_TXNCTR_Msk & ((value) << DACC_TNCR_TXNCTR_Pos)))
+/* -------- DACC_PTCR : (DACC Offset: 0x120) Transfer Control Register -------- */
+#define DACC_PTCR_RXTEN (0x1u << 0) /**< \brief (DACC_PTCR) Receiver Transfer Enable */
+#define DACC_PTCR_RXTDIS (0x1u << 1) /**< \brief (DACC_PTCR) Receiver Transfer Disable */
+#define DACC_PTCR_TXTEN (0x1u << 8) /**< \brief (DACC_PTCR) Transmitter Transfer Enable */
+#define DACC_PTCR_TXTDIS (0x1u << 9) /**< \brief (DACC_PTCR) Transmitter Transfer Disable */
+/* -------- DACC_PTSR : (DACC Offset: 0x124) Transfer Status Register -------- */
+#define DACC_PTSR_RXTEN (0x1u << 0) /**< \brief (DACC_PTSR) Receiver Transfer Enable */
+#define DACC_PTSR_TXTEN (0x1u << 8) /**< \brief (DACC_PTSR) Transmitter Transfer Enable */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Embedded Flash Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_EFC Embedded Flash Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Efc hardware registers */
+typedef struct {
+ RwReg EEFC_FMR; /**< \brief (Efc Offset: 0x00) EEFC Flash Mode Register */
+ WoReg EEFC_FCR; /**< \brief (Efc Offset: 0x04) EEFC Flash Command Register */
+ RoReg EEFC_FSR; /**< \brief (Efc Offset: 0x08) EEFC Flash Status Register */
+ RoReg EEFC_FRR; /**< \brief (Efc Offset: 0x0C) EEFC Flash Result Register */
+} Efc;
+#endif /* __ASSEMBLY__ */
+/* -------- EEFC_FMR : (EFC Offset: 0x00) EEFC Flash Mode Register -------- */
+#define EEFC_FMR_FRDY (0x1u << 0) /**< \brief (EEFC_FMR) Ready Interrupt Enable */
+#define EEFC_FMR_FWS_Pos 8
+#define EEFC_FMR_FWS_Msk (0xfu << EEFC_FMR_FWS_Pos) /**< \brief (EEFC_FMR) Flash Wait State */
+#define EEFC_FMR_FWS(value) ((EEFC_FMR_FWS_Msk & ((value) << EEFC_FMR_FWS_Pos)))
+#define EEFC_FMR_FAM (0x1u << 24) /**< \brief (EEFC_FMR) Flash Access Mode */
+/* -------- EEFC_FCR : (EFC Offset: 0x04) EEFC Flash Command Register -------- */
+#define EEFC_FCR_FCMD_Pos 0
+#define EEFC_FCR_FCMD_Msk (0xffu << EEFC_FCR_FCMD_Pos) /**< \brief (EEFC_FCR) Flash Command */
+#define EEFC_FCR_FCMD(value) ((EEFC_FCR_FCMD_Msk & ((value) << EEFC_FCR_FCMD_Pos)))
+#define EEFC_FCR_FARG_Pos 8
+#define EEFC_FCR_FARG_Msk (0xffffu << EEFC_FCR_FARG_Pos) /**< \brief (EEFC_FCR) Flash Command Argument */
+#define EEFC_FCR_FARG(value) ((EEFC_FCR_FARG_Msk & ((value) << EEFC_FCR_FARG_Pos)))
+#define EEFC_FCR_FKEY_Pos 24
+#define EEFC_FCR_FKEY_Msk (0xffu << EEFC_FCR_FKEY_Pos) /**< \brief (EEFC_FCR) Flash Writing Protection Key */
+#define EEFC_FCR_FKEY(value) ((EEFC_FCR_FKEY_Msk & ((value) << EEFC_FCR_FKEY_Pos)))
+/* -------- EEFC_FSR : (EFC Offset: 0x08) EEFC Flash Status Register -------- */
+#define EEFC_FSR_FRDY (0x1u << 0) /**< \brief (EEFC_FSR) Flash Ready Status */
+#define EEFC_FSR_FCMDE (0x1u << 1) /**< \brief (EEFC_FSR) Flash Command Error Status */
+#define EEFC_FSR_FLOCKE (0x1u << 2) /**< \brief (EEFC_FSR) Flash Lock Error Status */
+/* -------- EEFC_FRR : (EFC Offset: 0x0C) EEFC Flash Result Register -------- */
+#define EEFC_FRR_FVALUE_Pos 0
+#define EEFC_FRR_FVALUE_Msk (0xffffffffu << EEFC_FRR_FVALUE_Pos) /**< \brief (EEFC_FRR) Flash Result Value */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR General Purpose Backup Register */
+/* ============================================================================= */
+/** \addtogroup SAM3S_GPBR General Purpose Backup Register */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Gpbr hardware registers */
+typedef struct {
+ RwReg SYS_GPBR0; /**< \brief (Gpbr Offset: 0x0) General Purpose Backup Register 0 */
+ RwReg SYS_GPBR1; /**< \brief (Gpbr Offset: 0x4) General Purpose Backup Register 1 */
+ RwReg SYS_GPBR2; /**< \brief (Gpbr Offset: 0x8) General Purpose Backup Register 2 */
+ RwReg SYS_GPBR3; /**< \brief (Gpbr Offset: 0xC) General Purpose Backup Register 3 */
+ RwReg SYS_GPBR4; /**< \brief (Gpbr Offset: 0x10) General Purpose Backup Register 4 */
+ RwReg SYS_GPBR5; /**< \brief (Gpbr Offset: 0x14) General Purpose Backup Register 5 */
+ RwReg SYS_GPBR6; /**< \brief (Gpbr Offset: 0x18) General Purpose Backup Register 6 */
+ RwReg SYS_GPBR7; /**< \brief (Gpbr Offset: 0x1C) General Purpose Backup Register 7 */
+} Gpbr;
+#endif /* __ASSEMBLY__ */
+/* -------- SYS_GPBR0 : (GPBR Offset: 0x0) General Purpose Backup Register 0 -------- */
+#define SYS_GPBR0_GPBR_VALUE0_Pos 0
+#define SYS_GPBR0_GPBR_VALUE0_Msk (0xffffffffu << SYS_GPBR0_GPBR_VALUE0_Pos) /**< \brief (SYS_GPBR0) Value of GPBR x */
+#define SYS_GPBR0_GPBR_VALUE0(value) ((SYS_GPBR0_GPBR_VALUE0_Msk & ((value) << SYS_GPBR0_GPBR_VALUE0_Pos)))
+/* -------- SYS_GPBR1 : (GPBR Offset: 0x4) General Purpose Backup Register 1 -------- */
+#define SYS_GPBR1_GPBR_VALUE1_Pos 0
+#define SYS_GPBR1_GPBR_VALUE1_Msk (0xffffffffu << SYS_GPBR1_GPBR_VALUE1_Pos) /**< \brief (SYS_GPBR1) Value of GPBR x */
+#define SYS_GPBR1_GPBR_VALUE1(value) ((SYS_GPBR1_GPBR_VALUE1_Msk & ((value) << SYS_GPBR1_GPBR_VALUE1_Pos)))
+/* -------- SYS_GPBR2 : (GPBR Offset: 0x8) General Purpose Backup Register 2 -------- */
+#define SYS_GPBR2_GPBR_VALUE2_Pos 0
+#define SYS_GPBR2_GPBR_VALUE2_Msk (0xffffffffu << SYS_GPBR2_GPBR_VALUE2_Pos) /**< \brief (SYS_GPBR2) Value of GPBR x */
+#define SYS_GPBR2_GPBR_VALUE2(value) ((SYS_GPBR2_GPBR_VALUE2_Msk & ((value) << SYS_GPBR2_GPBR_VALUE2_Pos)))
+/* -------- SYS_GPBR3 : (GPBR Offset: 0xC) General Purpose Backup Register 3 -------- */
+#define SYS_GPBR3_GPBR_VALUE3_Pos 0
+#define SYS_GPBR3_GPBR_VALUE3_Msk (0xffffffffu << SYS_GPBR3_GPBR_VALUE3_Pos) /**< \brief (SYS_GPBR3) Value of GPBR x */
+#define SYS_GPBR3_GPBR_VALUE3(value) ((SYS_GPBR3_GPBR_VALUE3_Msk & ((value) << SYS_GPBR3_GPBR_VALUE3_Pos)))
+/* -------- SYS_GPBR4 : (GPBR Offset: 0x10) General Purpose Backup Register 4 -------- */
+#define SYS_GPBR4_GPBR_VALUE4_Pos 0
+#define SYS_GPBR4_GPBR_VALUE4_Msk (0xffffffffu << SYS_GPBR4_GPBR_VALUE4_Pos) /**< \brief (SYS_GPBR4) Value of GPBR x */
+#define SYS_GPBR4_GPBR_VALUE4(value) ((SYS_GPBR4_GPBR_VALUE4_Msk & ((value) << SYS_GPBR4_GPBR_VALUE4_Pos)))
+/* -------- SYS_GPBR5 : (GPBR Offset: 0x14) General Purpose Backup Register 5 -------- */
+#define SYS_GPBR5_GPBR_VALUE5_Pos 0
+#define SYS_GPBR5_GPBR_VALUE5_Msk (0xffffffffu << SYS_GPBR5_GPBR_VALUE5_Pos) /**< \brief (SYS_GPBR5) Value of GPBR x */
+#define SYS_GPBR5_GPBR_VALUE5(value) ((SYS_GPBR5_GPBR_VALUE5_Msk & ((value) << SYS_GPBR5_GPBR_VALUE5_Pos)))
+/* -------- SYS_GPBR6 : (GPBR Offset: 0x18) General Purpose Backup Register 6 -------- */
+#define SYS_GPBR6_GPBR_VALUE6_Pos 0
+#define SYS_GPBR6_GPBR_VALUE6_Msk (0xffffffffu << SYS_GPBR6_GPBR_VALUE6_Pos) /**< \brief (SYS_GPBR6) Value of GPBR x */
+#define SYS_GPBR6_GPBR_VALUE6(value) ((SYS_GPBR6_GPBR_VALUE6_Msk & ((value) << SYS_GPBR6_GPBR_VALUE6_Pos)))
+/* -------- SYS_GPBR7 : (GPBR Offset: 0x1C) General Purpose Backup Register 7 -------- */
+#define SYS_GPBR7_GPBR_VALUE7_Pos 0
+#define SYS_GPBR7_GPBR_VALUE7_Msk (0xffffffffu << SYS_GPBR7_GPBR_VALUE7_Pos) /**< \brief (SYS_GPBR7) Value of GPBR x */
+#define SYS_GPBR7_GPBR_VALUE7(value) ((SYS_GPBR7_GPBR_VALUE7_Msk & ((value) << SYS_GPBR7_GPBR_VALUE7_Pos)))
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR High Speed MultiMedia Card Interface */
+/* ============================================================================= */
+/** \addtogroup SAM3S_HSMCI High Speed MultiMedia Card Interface */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Hsmci hardware registers */
+typedef struct {
+ WoReg HSMCI_CR; /**< \brief (Hsmci Offset: 0x00) Control Register */
+ RwReg HSMCI_MR; /**< \brief (Hsmci Offset: 0x04) Mode Register */
+ RwReg HSMCI_DTOR; /**< \brief (Hsmci Offset: 0x08) Data Timeout Register */
+ RwReg HSMCI_SDCR; /**< \brief (Hsmci Offset: 0x0C) SD/SDIO Card Register */
+ RwReg HSMCI_ARGR; /**< \brief (Hsmci Offset: 0x10) Argument Register */
+ WoReg HSMCI_CMDR; /**< \brief (Hsmci Offset: 0x14) Command Register */
+ RwReg HSMCI_BLKR; /**< \brief (Hsmci Offset: 0x18) Block Register */
+ RwReg HSMCI_CSTOR; /**< \brief (Hsmci Offset: 0x1C) Completion Signal Timeout Register */
+ RoReg HSMCI_RSPR[4]; /**< \brief (Hsmci Offset: 0x20) Response Register */
+ RoReg HSMCI_RDR; /**< \brief (Hsmci Offset: 0x30) Receive Data Register */
+ WoReg HSMCI_TDR; /**< \brief (Hsmci Offset: 0x34) Transmit Data Register */
+ RwReg Reserved1[2];
+ RoReg HSMCI_SR; /**< \brief (Hsmci Offset: 0x40) Status Register */
+ WoReg HSMCI_IER; /**< \brief (Hsmci Offset: 0x44) Interrupt Enable Register */
+ WoReg HSMCI_IDR; /**< \brief (Hsmci Offset: 0x48) Interrupt Disable Register */
+ RoReg HSMCI_IMR; /**< \brief (Hsmci Offset: 0x4C) Interrupt Mask Register */
+ RwReg Reserved2[1];
+ RwReg HSMCI_CFG; /**< \brief (Hsmci Offset: 0x54) Configuration Register */
+ RwReg Reserved3[35];
+ RwReg HSMCI_WPMR; /**< \brief (Hsmci Offset: 0xE4) Write Protection Mode Register */
+ RoReg HSMCI_WPSR; /**< \brief (Hsmci Offset: 0xE8) Write Protection Status Register */
+ RwReg Reserved4[5];
+ RwReg HSMCI_RPR; /**< \brief (Hsmci Offset: 0x100) Receive Pointer Register */
+ RwReg HSMCI_RCR; /**< \brief (Hsmci Offset: 0x104) Receive Counter Register */
+ RwReg HSMCI_TPR; /**< \brief (Hsmci Offset: 0x108) Transmit Pointer Register */
+ RwReg HSMCI_TCR; /**< \brief (Hsmci Offset: 0x10C) Transmit Counter Register */
+ RwReg HSMCI_RNPR; /**< \brief (Hsmci Offset: 0x110) Receive Next Pointer Register */
+ RwReg HSMCI_RNCR; /**< \brief (Hsmci Offset: 0x114) Receive Next Counter Register */
+ RwReg HSMCI_TNPR; /**< \brief (Hsmci Offset: 0x118) Transmit Next Pointer Register */
+ RwReg HSMCI_TNCR; /**< \brief (Hsmci Offset: 0x11C) Transmit Next Counter Register */
+ WoReg HSMCI_PTCR; /**< \brief (Hsmci Offset: 0x120) Transfer Control Register */
+ RoReg HSMCI_PTSR; /**< \brief (Hsmci Offset: 0x124) Transfer Status Register */
+ RwReg Reserved5[54];
+ RwReg HSMCI_FIFO[256]; /**< \brief (Hsmci Offset: 0x200) FIFO Memory Aperture0 */
+} Hsmci;
+#endif /* __ASSEMBLY__ */
+/* -------- HSMCI_CR : (HSMCI Offset: 0x00) Control Register -------- */
+#define HSMCI_CR_MCIEN (0x1u << 0) /**< \brief (HSMCI_CR) Multi-Media Interface Enable */
+#define HSMCI_CR_MCIDIS (0x1u << 1) /**< \brief (HSMCI_CR) Multi-Media Interface Disable */
+#define HSMCI_CR_PWSEN (0x1u << 2) /**< \brief (HSMCI_CR) Power Save Mode Enable */
+#define HSMCI_CR_PWSDIS (0x1u << 3) /**< \brief (HSMCI_CR) Power Save Mode Disable */
+#define HSMCI_CR_SWRST (0x1u << 7) /**< \brief (HSMCI_CR) Software Reset */
+/* -------- HSMCI_MR : (HSMCI Offset: 0x04) Mode Register -------- */
+#define HSMCI_MR_CLKDIV_Pos 0
+#define HSMCI_MR_CLKDIV_Msk (0xffu << HSMCI_MR_CLKDIV_Pos) /**< \brief (HSMCI_MR) Clock Divider */
+#define HSMCI_MR_CLKDIV(value) ((HSMCI_MR_CLKDIV_Msk & ((value) << HSMCI_MR_CLKDIV_Pos)))
+#define HSMCI_MR_PWSDIV_Pos 8
+#define HSMCI_MR_PWSDIV_Msk (0x7u << HSMCI_MR_PWSDIV_Pos) /**< \brief (HSMCI_MR) Power Saving Divider */
+#define HSMCI_MR_PWSDIV(value) ((HSMCI_MR_PWSDIV_Msk & ((value) << HSMCI_MR_PWSDIV_Pos)))
+#define HSMCI_MR_RDPROOF (0x1u << 11) /**< \brief (HSMCI_MR) */
+#define HSMCI_MR_WRPROOF (0x1u << 12) /**< \brief (HSMCI_MR) */
+#define HSMCI_MR_FBYTE (0x1u << 13) /**< \brief (HSMCI_MR) Force Byte Transfer */
+#define HSMCI_MR_PADV (0x1u << 14) /**< \brief (HSMCI_MR) Padding Value */
+#define HSMCI_MR_PDCMODE (0x1u << 15) /**< \brief (HSMCI_MR) PDC-oriented Mode */
+#define HSMCI_MR_BLKLEN_Pos 16
+#define HSMCI_MR_BLKLEN_Msk (0xffffu << HSMCI_MR_BLKLEN_Pos) /**< \brief (HSMCI_MR) Data Block Length */
+#define HSMCI_MR_BLKLEN(value) ((HSMCI_MR_BLKLEN_Msk & ((value) << HSMCI_MR_BLKLEN_Pos)))
+/* -------- HSMCI_DTOR : (HSMCI Offset: 0x08) Data Timeout Register -------- */
+#define HSMCI_DTOR_DTOCYC_Pos 0
+#define HSMCI_DTOR_DTOCYC_Msk (0xfu << HSMCI_DTOR_DTOCYC_Pos) /**< \brief (HSMCI_DTOR) Data Timeout Cycle Number */
+#define HSMCI_DTOR_DTOCYC(value) ((HSMCI_DTOR_DTOCYC_Msk & ((value) << HSMCI_DTOR_DTOCYC_Pos)))
+#define HSMCI_DTOR_DTOMUL_Pos 4
+#define HSMCI_DTOR_DTOMUL_Msk (0x7u << HSMCI_DTOR_DTOMUL_Pos) /**< \brief (HSMCI_DTOR) Data Timeout Multiplier */
+#define HSMCI_DTOR_DTOMUL_1 (0x0u << 4) /**< \brief (HSMCI_DTOR) DTOCYC */
+#define HSMCI_DTOR_DTOMUL_16 (0x1u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 16 */
+#define HSMCI_DTOR_DTOMUL_128 (0x2u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 128 */
+#define HSMCI_DTOR_DTOMUL_256 (0x3u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 256 */
+#define HSMCI_DTOR_DTOMUL_1024 (0x4u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 1024 */
+#define HSMCI_DTOR_DTOMUL_4096 (0x5u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 4096 */
+#define HSMCI_DTOR_DTOMUL_65536 (0x6u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 65536 */
+#define HSMCI_DTOR_DTOMUL_1048576 (0x7u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 1048576 */
+/* -------- HSMCI_SDCR : (HSMCI Offset: 0x0C) SD/SDIO Card Register -------- */
+#define HSMCI_SDCR_SDCSEL_Pos 0
+#define HSMCI_SDCR_SDCSEL_Msk (0x3u << HSMCI_SDCR_SDCSEL_Pos) /**< \brief (HSMCI_SDCR) SDCard/SDIO Slot */
+#define HSMCI_SDCR_SDCSEL_SLOTA (0x0u << 0) /**< \brief (HSMCI_SDCR) Slot A is selected. */
+#define HSMCI_SDCR_SDCSEL_SLOTB (0x1u << 0) /**< \brief (HSMCI_SDCR) - */
+#define HSMCI_SDCR_SDCSEL_SLOTC (0x2u << 0) /**< \brief (HSMCI_SDCR) - */
+#define HSMCI_SDCR_SDCSEL_SLOTD (0x3u << 0) /**< \brief (HSMCI_SDCR) - */
+#define HSMCI_SDCR_SDCBUS_Pos 6
+#define HSMCI_SDCR_SDCBUS_Msk (0x3u << HSMCI_SDCR_SDCBUS_Pos) /**< \brief (HSMCI_SDCR) SDCard/SDIO Bus Width */
+#define HSMCI_SDCR_SDCBUS_1 (0x0u << 6) /**< \brief (HSMCI_SDCR) 1 bit */
+#define HSMCI_SDCR_SDCBUS_4 (0x2u << 6) /**< \brief (HSMCI_SDCR) 4 bit */
+#define HSMCI_SDCR_SDCBUS_8 (0x3u << 6) /**< \brief (HSMCI_SDCR) 8 bit */
+/* -------- HSMCI_ARGR : (HSMCI Offset: 0x10) Argument Register -------- */
+#define HSMCI_ARGR_ARG_Pos 0
+#define HSMCI_ARGR_ARG_Msk (0xffffffffu << HSMCI_ARGR_ARG_Pos) /**< \brief (HSMCI_ARGR) Command Argument */
+#define HSMCI_ARGR_ARG(value) ((HSMCI_ARGR_ARG_Msk & ((value) << HSMCI_ARGR_ARG_Pos)))
+/* -------- HSMCI_CMDR : (HSMCI Offset: 0x14) Command Register -------- */
+#define HSMCI_CMDR_CMDNB_Pos 0
+#define HSMCI_CMDR_CMDNB_Msk (0x3fu << HSMCI_CMDR_CMDNB_Pos) /**< \brief (HSMCI_CMDR) Command Number */
+#define HSMCI_CMDR_CMDNB(value) ((HSMCI_CMDR_CMDNB_Msk & ((value) << HSMCI_CMDR_CMDNB_Pos)))
+#define HSMCI_CMDR_RSPTYP_Pos 6
+#define HSMCI_CMDR_RSPTYP_Msk (0x3u << HSMCI_CMDR_RSPTYP_Pos) /**< \brief (HSMCI_CMDR) Response Type */
+#define HSMCI_CMDR_RSPTYP_NORESP (0x0u << 6) /**< \brief (HSMCI_CMDR) No response. */
+#define HSMCI_CMDR_RSPTYP_48_BIT (0x1u << 6) /**< \brief (HSMCI_CMDR) 48-bit response. */
+#define HSMCI_CMDR_RSPTYP_136_BIT (0x2u << 6) /**< \brief (HSMCI_CMDR) 136-bit response. */
+#define HSMCI_CMDR_RSPTYP_R1B (0x3u << 6) /**< \brief (HSMCI_CMDR) R1b response type */
+#define HSMCI_CMDR_SPCMD_Pos 8
+#define HSMCI_CMDR_SPCMD_Msk (0x7u << HSMCI_CMDR_SPCMD_Pos) /**< \brief (HSMCI_CMDR) Special Command */
+#define HSMCI_CMDR_SPCMD_STD (0x0u << 8) /**< \brief (HSMCI_CMDR) Not a special CMD. */
+#define HSMCI_CMDR_SPCMD_INIT (0x1u << 8) /**< \brief (HSMCI_CMDR) Initialization CMD:74 clock cycles for initialization sequence. */
+#define HSMCI_CMDR_SPCMD_SYNC (0x2u << 8) /**< \brief (HSMCI_CMDR) Synchronized CMD:Wait for the end of the current data block transfer before sending the pending command. */
+#define HSMCI_CMDR_SPCMD_CE_ATA (0x3u << 8) /**< \brief (HSMCI_CMDR) CE-ATA Completion Signal disable Command.The host cancels the ability for the device to return a command completion signal on the command line. */
+#define HSMCI_CMDR_SPCMD_IT_CMD (0x4u << 8) /**< \brief (HSMCI_CMDR) Interrupt command:Corresponds to the Interrupt Mode (CMD40). */
+#define HSMCI_CMDR_SPCMD_IT_RESP (0x5u << 8) /**< \brief (HSMCI_CMDR) Interrupt response:Corresponds to the Interrupt Mode (CMD40). */
+#define HSMCI_CMDR_SPCMD_BOR (0x6u << 8) /**< \brief (HSMCI_CMDR) Boot Operation Request.Start a boot operation mode, the host processor can read boot data from the MMC device directly. */
+#define HSMCI_CMDR_SPCMD_EBO (0x7u << 8) /**< \brief (HSMCI_CMDR) End Boot Operation.This command allows the host processor to terminate the boot operation mode. */
+#define HSMCI_CMDR_OPDCMD (0x1u << 11) /**< \brief (HSMCI_CMDR) Open Drain Command */
+#define HSMCI_CMDR_OPDCMD_PUSHPULL (0x0u << 11) /**< \brief (HSMCI_CMDR) Push pull command. */
+#define HSMCI_CMDR_OPDCMD_OPENDRAIN (0x1u << 11) /**< \brief (HSMCI_CMDR) Open drain command. */
+#define HSMCI_CMDR_MAXLAT (0x1u << 12) /**< \brief (HSMCI_CMDR) Max Latency for Command to Response */
+#define HSMCI_CMDR_MAXLAT_5 (0x0u << 12) /**< \brief (HSMCI_CMDR) 5-cycle max latency. */
+#define HSMCI_CMDR_MAXLAT_64 (0x1u << 12) /**< \brief (HSMCI_CMDR) 64-cycle max latency. */
+#define HSMCI_CMDR_TRCMD_Pos 16
+#define HSMCI_CMDR_TRCMD_Msk (0x3u << HSMCI_CMDR_TRCMD_Pos) /**< \brief (HSMCI_CMDR) Transfer Command */
+#define HSMCI_CMDR_TRCMD_NO_DATA (0x0u << 16) /**< \brief (HSMCI_CMDR) No data transfer */
+#define HSMCI_CMDR_TRCMD_START_DATA (0x1u << 16) /**< \brief (HSMCI_CMDR) Start data transfer */
+#define HSMCI_CMDR_TRCMD_STOP_DATA (0x2u << 16) /**< \brief (HSMCI_CMDR) Stop data transfer */
+#define HSMCI_CMDR_TRDIR (0x1u << 18) /**< \brief (HSMCI_CMDR) Transfer Direction */
+#define HSMCI_CMDR_TRDIR_WRITE (0x0u << 18) /**< \brief (HSMCI_CMDR) Write. */
+#define HSMCI_CMDR_TRDIR_READ (0x1u << 18) /**< \brief (HSMCI_CMDR) Read. */
+#define HSMCI_CMDR_TRTYP_Pos 19
+#define HSMCI_CMDR_TRTYP_Msk (0x7u << HSMCI_CMDR_TRTYP_Pos) /**< \brief (HSMCI_CMDR) Transfer Type */
+#define HSMCI_CMDR_TRTYP_SINGLE (0x0u << 19) /**< \brief (HSMCI_CMDR) MMC/SDCard Single Block */
+#define HSMCI_CMDR_TRTYP_MULTIPLE (0x1u << 19) /**< \brief (HSMCI_CMDR) MMC/SDCard Multiple Block */
+#define HSMCI_CMDR_TRTYP_STREAM (0x2u << 19) /**< \brief (HSMCI_CMDR) MMC Stream */
+#define HSMCI_CMDR_TRTYP_BYTE (0x4u << 19) /**< \brief (HSMCI_CMDR) SDIO Byte */
+#define HSMCI_CMDR_TRTYP_BLOCK (0x5u << 19) /**< \brief (HSMCI_CMDR) SDIO Block */
+#define HSMCI_CMDR_IOSPCMD_Pos 24
+#define HSMCI_CMDR_IOSPCMD_Msk (0x3u << HSMCI_CMDR_IOSPCMD_Pos) /**< \brief (HSMCI_CMDR) SDIO Special Command */
+#define HSMCI_CMDR_IOSPCMD_STD (0x0u << 24) /**< \brief (HSMCI_CMDR) Not an SDIO Special Command */
+#define HSMCI_CMDR_IOSPCMD_SUSPEND (0x1u << 24) /**< \brief (HSMCI_CMDR) SDIO Suspend Command */
+#define HSMCI_CMDR_IOSPCMD_RESUME (0x2u << 24) /**< \brief (HSMCI_CMDR) SDIO Resume Command */
+#define HSMCI_CMDR_ATACS (0x1u << 26) /**< \brief (HSMCI_CMDR) ATA with Command Completion Signal */
+#define HSMCI_CMDR_ATACS_NORMAL (0x0u << 26) /**< \brief (HSMCI_CMDR) Normal operation mode. */
+#define HSMCI_CMDR_ATACS_COMPLETION (0x1u << 26) /**< \brief (HSMCI_CMDR) This bit indicates that a completion signal is expected within a programmed amount of time (HSMCI_CSTOR). */
+#define HSMCI_CMDR_BOOT_ACK (0x1u << 27) /**< \brief (HSMCI_CMDR) Boot Operation Acknowledge. */
+/* -------- HSMCI_BLKR : (HSMCI Offset: 0x18) Block Register -------- */
+#define HSMCI_BLKR_BCNT_Pos 0
+#define HSMCI_BLKR_BCNT_Msk (0xffffu << HSMCI_BLKR_BCNT_Pos) /**< \brief (HSMCI_BLKR) MMC/SDIO Block Count - SDIO Byte Count */
+#define HSMCI_BLKR_BCNT_MULTIPLE (0x0u << 0) /**< \brief (HSMCI_BLKR) MMC/SDCARD Multiple BlockFrom 1 to 65635: Value 0 corresponds to an infinite block transfer. */
+#define HSMCI_BLKR_BCNT_BYTE (0x4u << 0) /**< \brief (HSMCI_BLKR) SDIO ByteFrom 1 to 512 bytes: Value 0 corresponds to a 512-byte transfer.Values from 0x200 to 0xFFFF are forbidden. */
+#define HSMCI_BLKR_BCNT_BLOCK (0x5u << 0) /**< \brief (HSMCI_BLKR) SDIO BlockFrom 1 to 511 blocks: Value 0 corresponds to an infinite block transfer.Values from 0x200 to 0xFFFF are forbidden. */
+#define HSMCI_BLKR_BLKLEN_Pos 16
+#define HSMCI_BLKR_BLKLEN_Msk (0xffffu << HSMCI_BLKR_BLKLEN_Pos) /**< \brief (HSMCI_BLKR) Data Block Length */
+#define HSMCI_BLKR_BLKLEN(value) ((HSMCI_BLKR_BLKLEN_Msk & ((value) << HSMCI_BLKR_BLKLEN_Pos)))
+/* -------- HSMCI_CSTOR : (HSMCI Offset: 0x1C) Completion Signal Timeout Register -------- */
+#define HSMCI_CSTOR_CSTOCYC_Pos 0
+#define HSMCI_CSTOR_CSTOCYC_Msk (0xfu << HSMCI_CSTOR_CSTOCYC_Pos) /**< \brief (HSMCI_CSTOR) Completion Signal Timeout Cycle Number */
+#define HSMCI_CSTOR_CSTOCYC(value) ((HSMCI_CSTOR_CSTOCYC_Msk & ((value) << HSMCI_CSTOR_CSTOCYC_Pos)))
+#define HSMCI_CSTOR_CSTOMUL_Pos 4
+#define HSMCI_CSTOR_CSTOMUL_Msk (0x7u << HSMCI_CSTOR_CSTOMUL_Pos) /**< \brief (HSMCI_CSTOR) Completion Signal Timeout Multiplier */
+#define HSMCI_CSTOR_CSTOMUL_1 (0x0u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1 */
+#define HSMCI_CSTOR_CSTOMUL_16 (0x1u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 16 */
+#define HSMCI_CSTOR_CSTOMUL_128 (0x2u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 128 */
+#define HSMCI_CSTOR_CSTOMUL_256 (0x3u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 256 */
+#define HSMCI_CSTOR_CSTOMUL_1024 (0x4u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1024 */
+#define HSMCI_CSTOR_CSTOMUL_4096 (0x5u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 4096 */
+#define HSMCI_CSTOR_CSTOMUL_65536 (0x6u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 65536 */
+#define HSMCI_CSTOR_CSTOMUL_1048576 (0x7u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1048576 */
+/* -------- HSMCI_RSPR[4] : (HSMCI Offset: 0x20) Response Register -------- */
+#define HSMCI_RSPR_RSP_Pos 0
+#define HSMCI_RSPR_RSP_Msk (0xffffffffu << HSMCI_RSPR_RSP_Pos) /**< \brief (HSMCI_RSPR[4]) Response */
+/* -------- HSMCI_RDR : (HSMCI Offset: 0x30) Receive Data Register -------- */
+#define HSMCI_RDR_DATA_Pos 0
+#define HSMCI_RDR_DATA_Msk (0xffffffffu << HSMCI_RDR_DATA_Pos) /**< \brief (HSMCI_RDR) Data to Read */
+/* -------- HSMCI_TDR : (HSMCI Offset: 0x34) Transmit Data Register -------- */
+#define HSMCI_TDR_DATA_Pos 0
+#define HSMCI_TDR_DATA_Msk (0xffffffffu << HSMCI_TDR_DATA_Pos) /**< \brief (HSMCI_TDR) Data to Write */
+#define HSMCI_TDR_DATA(value) ((HSMCI_TDR_DATA_Msk & ((value) << HSMCI_TDR_DATA_Pos)))
+/* -------- HSMCI_SR : (HSMCI Offset: 0x40) Status Register -------- */
+#define HSMCI_SR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_SR) Command Ready */
+#define HSMCI_SR_RXRDY (0x1u << 1) /**< \brief (HSMCI_SR) Receiver Ready */
+#define HSMCI_SR_TXRDY (0x1u << 2) /**< \brief (HSMCI_SR) Transmit Ready */
+#define HSMCI_SR_BLKE (0x1u << 3) /**< \brief (HSMCI_SR) Data Block Ended */
+#define HSMCI_SR_DTIP (0x1u << 4) /**< \brief (HSMCI_SR) Data Transfer in Progress */
+#define HSMCI_SR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_SR) HSMCI Not Busy */
+#define HSMCI_SR_ENDRX (0x1u << 6) /**< \brief (HSMCI_SR) End of RX Buffer */
+#define HSMCI_SR_ENDTX (0x1u << 7) /**< \brief (HSMCI_SR) End of TX Buffer */
+#define HSMCI_SR_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_SR) SDIO Interrupt for Slot A */
+#define HSMCI_SR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_SR) SDIO Read Wait Operation Status */
+#define HSMCI_SR_CSRCV (0x1u << 13) /**< \brief (HSMCI_SR) CE-ATA Completion Signal Received */
+#define HSMCI_SR_RXBUFF (0x1u << 14) /**< \brief (HSMCI_SR) RX Buffer Full */
+#define HSMCI_SR_TXBUFE (0x1u << 15) /**< \brief (HSMCI_SR) TX Buffer Empty */
+#define HSMCI_SR_RINDE (0x1u << 16) /**< \brief (HSMCI_SR) Response Index Error */
+#define HSMCI_SR_RDIRE (0x1u << 17) /**< \brief (HSMCI_SR) Response Direction Error */
+#define HSMCI_SR_RCRCE (0x1u << 18) /**< \brief (HSMCI_SR) Response CRC Error */
+#define HSMCI_SR_RENDE (0x1u << 19) /**< \brief (HSMCI_SR) Response End Bit Error */
+#define HSMCI_SR_RTOE (0x1u << 20) /**< \brief (HSMCI_SR) Response Time-out Error */
+#define HSMCI_SR_DCRCE (0x1u << 21) /**< \brief (HSMCI_SR) Data CRC Error */
+#define HSMCI_SR_DTOE (0x1u << 22) /**< \brief (HSMCI_SR) Data Time-out Error */
+#define HSMCI_SR_CSTOE (0x1u << 23) /**< \brief (HSMCI_SR) Completion Signal Time-out Error */
+#define HSMCI_SR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_SR) FIFO empty flag */
+#define HSMCI_SR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_SR) Transfer Done flag */
+#define HSMCI_SR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_SR) Boot Operation Acknowledge Received */
+#define HSMCI_SR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_SR) Boot Operation Acknowledge Error */
+#define HSMCI_SR_OVRE (0x1u << 30) /**< \brief (HSMCI_SR) Overrun */
+#define HSMCI_SR_UNRE (0x1u << 31) /**< \brief (HSMCI_SR) Underrun */
+/* -------- HSMCI_IER : (HSMCI Offset: 0x44) Interrupt Enable Register -------- */
+#define HSMCI_IER_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IER) Command Ready Interrupt Enable */
+#define HSMCI_IER_RXRDY (0x1u << 1) /**< \brief (HSMCI_IER) Receiver Ready Interrupt Enable */
+#define HSMCI_IER_TXRDY (0x1u << 2) /**< \brief (HSMCI_IER) Transmit Ready Interrupt Enable */
+#define HSMCI_IER_BLKE (0x1u << 3) /**< \brief (HSMCI_IER) Data Block Ended Interrupt Enable */
+#define HSMCI_IER_DTIP (0x1u << 4) /**< \brief (HSMCI_IER) Data Transfer in Progress Interrupt Enable */
+#define HSMCI_IER_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IER) Data Not Busy Interrupt Enable */
+#define HSMCI_IER_ENDRX (0x1u << 6) /**< \brief (HSMCI_IER) End of Receive Buffer Interrupt Enable */
+#define HSMCI_IER_ENDTX (0x1u << 7) /**< \brief (HSMCI_IER) End of Transmit Buffer Interrupt Enable */
+#define HSMCI_IER_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_IER) SDIO Interrupt for Slot A Interrupt Enable */
+#define HSMCI_IER_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IER) SDIO Read Wait Operation Status Interrupt Enable */
+#define HSMCI_IER_CSRCV (0x1u << 13) /**< \brief (HSMCI_IER) Completion Signal Received Interrupt Enable */
+#define HSMCI_IER_RXBUFF (0x1u << 14) /**< \brief (HSMCI_IER) Receive Buffer Full Interrupt Enable */
+#define HSMCI_IER_TXBUFE (0x1u << 15) /**< \brief (HSMCI_IER) Transmit Buffer Empty Interrupt Enable */
+#define HSMCI_IER_RINDE (0x1u << 16) /**< \brief (HSMCI_IER) Response Index Error Interrupt Enable */
+#define HSMCI_IER_RDIRE (0x1u << 17) /**< \brief (HSMCI_IER) Response Direction Error Interrupt Enable */
+#define HSMCI_IER_RCRCE (0x1u << 18) /**< \brief (HSMCI_IER) Response CRC Error Interrupt Enable */
+#define HSMCI_IER_RENDE (0x1u << 19) /**< \brief (HSMCI_IER) Response End Bit Error Interrupt Enable */
+#define HSMCI_IER_RTOE (0x1u << 20) /**< \brief (HSMCI_IER) Response Time-out Error Interrupt Enable */
+#define HSMCI_IER_DCRCE (0x1u << 21) /**< \brief (HSMCI_IER) Data CRC Error Interrupt Enable */
+#define HSMCI_IER_DTOE (0x1u << 22) /**< \brief (HSMCI_IER) Data Time-out Error Interrupt Enable */
+#define HSMCI_IER_CSTOE (0x1u << 23) /**< \brief (HSMCI_IER) Completion Signal Timeout Error Interrupt Enable */
+#define HSMCI_IER_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IER) FIFO empty Interrupt enable */
+#define HSMCI_IER_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IER) Transfer Done Interrupt enable */
+#define HSMCI_IER_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IER) Boot Acknowledge Interrupt Enable */
+#define HSMCI_IER_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IER) Boot Acknowledge Error Interrupt Enable */
+#define HSMCI_IER_OVRE (0x1u << 30) /**< \brief (HSMCI_IER) Overrun Interrupt Enable */
+#define HSMCI_IER_UNRE (0x1u << 31) /**< \brief (HSMCI_IER) Underrun Interrupt Enable */
+/* -------- HSMCI_IDR : (HSMCI Offset: 0x48) Interrupt Disable Register -------- */
+#define HSMCI_IDR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IDR) Command Ready Interrupt Disable */
+#define HSMCI_IDR_RXRDY (0x1u << 1) /**< \brief (HSMCI_IDR) Receiver Ready Interrupt Disable */
+#define HSMCI_IDR_TXRDY (0x1u << 2) /**< \brief (HSMCI_IDR) Transmit Ready Interrupt Disable */
+#define HSMCI_IDR_BLKE (0x1u << 3) /**< \brief (HSMCI_IDR) Data Block Ended Interrupt Disable */
+#define HSMCI_IDR_DTIP (0x1u << 4) /**< \brief (HSMCI_IDR) Data Transfer in Progress Interrupt Disable */
+#define HSMCI_IDR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IDR) Data Not Busy Interrupt Disable */
+#define HSMCI_IDR_ENDRX (0x1u << 6) /**< \brief (HSMCI_IDR) End of Receive Buffer Interrupt Disable */
+#define HSMCI_IDR_ENDTX (0x1u << 7) /**< \brief (HSMCI_IDR) End of Transmit Buffer Interrupt Disable */
+#define HSMCI_IDR_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_IDR) SDIO Interrupt for Slot A Interrupt Disable */
+#define HSMCI_IDR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IDR) SDIO Read Wait Operation Status Interrupt Disable */
+#define HSMCI_IDR_CSRCV (0x1u << 13) /**< \brief (HSMCI_IDR) Completion Signal received interrupt Disable */
+#define HSMCI_IDR_RXBUFF (0x1u << 14) /**< \brief (HSMCI_IDR) Receive Buffer Full Interrupt Disable */
+#define HSMCI_IDR_TXBUFE (0x1u << 15) /**< \brief (HSMCI_IDR) Transmit Buffer Empty Interrupt Disable */
+#define HSMCI_IDR_RINDE (0x1u << 16) /**< \brief (HSMCI_IDR) Response Index Error Interrupt Disable */
+#define HSMCI_IDR_RDIRE (0x1u << 17) /**< \brief (HSMCI_IDR) Response Direction Error Interrupt Disable */
+#define HSMCI_IDR_RCRCE (0x1u << 18) /**< \brief (HSMCI_IDR) Response CRC Error Interrupt Disable */
+#define HSMCI_IDR_RENDE (0x1u << 19) /**< \brief (HSMCI_IDR) Response End Bit Error Interrupt Disable */
+#define HSMCI_IDR_RTOE (0x1u << 20) /**< \brief (HSMCI_IDR) Response Time-out Error Interrupt Disable */
+#define HSMCI_IDR_DCRCE (0x1u << 21) /**< \brief (HSMCI_IDR) Data CRC Error Interrupt Disable */
+#define HSMCI_IDR_DTOE (0x1u << 22) /**< \brief (HSMCI_IDR) Data Time-out Error Interrupt Disable */
+#define HSMCI_IDR_CSTOE (0x1u << 23) /**< \brief (HSMCI_IDR) Completion Signal Time out Error Interrupt Disable */
+#define HSMCI_IDR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IDR) FIFO empty Interrupt Disable */
+#define HSMCI_IDR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IDR) Transfer Done Interrupt Disable */
+#define HSMCI_IDR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IDR) Boot Acknowledge Interrupt Disable */
+#define HSMCI_IDR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IDR) Boot Acknowledge Error Interrupt Disable */
+#define HSMCI_IDR_OVRE (0x1u << 30) /**< \brief (HSMCI_IDR) Overrun Interrupt Disable */
+#define HSMCI_IDR_UNRE (0x1u << 31) /**< \brief (HSMCI_IDR) Underrun Interrupt Disable */
+/* -------- HSMCI_IMR : (HSMCI Offset: 0x4C) Interrupt Mask Register -------- */
+#define HSMCI_IMR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IMR) Command Ready Interrupt Mask */
+#define HSMCI_IMR_RXRDY (0x1u << 1) /**< \brief (HSMCI_IMR) Receiver Ready Interrupt Mask */
+#define HSMCI_IMR_TXRDY (0x1u << 2) /**< \brief (HSMCI_IMR) Transmit Ready Interrupt Mask */
+#define HSMCI_IMR_BLKE (0x1u << 3) /**< \brief (HSMCI_IMR) Data Block Ended Interrupt Mask */
+#define HSMCI_IMR_DTIP (0x1u << 4) /**< \brief (HSMCI_IMR) Data Transfer in Progress Interrupt Mask */
+#define HSMCI_IMR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IMR) Data Not Busy Interrupt Mask */
+#define HSMCI_IMR_ENDRX (0x1u << 6) /**< \brief (HSMCI_IMR) End of Receive Buffer Interrupt Mask */
+#define HSMCI_IMR_ENDTX (0x1u << 7) /**< \brief (HSMCI_IMR) End of Transmit Buffer Interrupt Mask */
+#define HSMCI_IMR_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_IMR) SDIO Interrupt for Slot A Interrupt Mask */
+#define HSMCI_IMR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IMR) SDIO Read Wait Operation Status Interrupt Mask */
+#define HSMCI_IMR_CSRCV (0x1u << 13) /**< \brief (HSMCI_IMR) Completion Signal Received Interrupt Mask */
+#define HSMCI_IMR_RXBUFF (0x1u << 14) /**< \brief (HSMCI_IMR) Receive Buffer Full Interrupt Mask */
+#define HSMCI_IMR_TXBUFE (0x1u << 15) /**< \brief (HSMCI_IMR) Transmit Buffer Empty Interrupt Mask */
+#define HSMCI_IMR_RINDE (0x1u << 16) /**< \brief (HSMCI_IMR) Response Index Error Interrupt Mask */
+#define HSMCI_IMR_RDIRE (0x1u << 17) /**< \brief (HSMCI_IMR) Response Direction Error Interrupt Mask */
+#define HSMCI_IMR_RCRCE (0x1u << 18) /**< \brief (HSMCI_IMR) Response CRC Error Interrupt Mask */
+#define HSMCI_IMR_RENDE (0x1u << 19) /**< \brief (HSMCI_IMR) Response End Bit Error Interrupt Mask */
+#define HSMCI_IMR_RTOE (0x1u << 20) /**< \brief (HSMCI_IMR) Response Time-out Error Interrupt Mask */
+#define HSMCI_IMR_DCRCE (0x1u << 21) /**< \brief (HSMCI_IMR) Data CRC Error Interrupt Mask */
+#define HSMCI_IMR_DTOE (0x1u << 22) /**< \brief (HSMCI_IMR) Data Time-out Error Interrupt Mask */
+#define HSMCI_IMR_CSTOE (0x1u << 23) /**< \brief (HSMCI_IMR) Completion Signal Time-out Error Interrupt Mask */
+#define HSMCI_IMR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IMR) FIFO Empty Interrupt Mask */
+#define HSMCI_IMR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IMR) Transfer Done Interrupt Mask */
+#define HSMCI_IMR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IMR) Boot Operation Acknowledge Received Interrupt Mask */
+#define HSMCI_IMR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IMR) Boot Operation Acknowledge Error Interrupt Mask */
+#define HSMCI_IMR_OVRE (0x1u << 30) /**< \brief (HSMCI_IMR) Overrun Interrupt Mask */
+#define HSMCI_IMR_UNRE (0x1u << 31) /**< \brief (HSMCI_IMR) Underrun Interrupt Mask */
+/* -------- HSMCI_CFG : (HSMCI Offset: 0x54) Configuration Register -------- */
+#define HSMCI_CFG_FIFOMODE (0x1u << 0) /**< \brief (HSMCI_CFG) HSMCI Internal FIFO control mode */
+#define HSMCI_CFG_FERRCTRL (0x1u << 4) /**< \brief (HSMCI_CFG) Flow Error flag reset control mode */
+#define HSMCI_CFG_HSMODE (0x1u << 8) /**< \brief (HSMCI_CFG) High Speed Mode */
+#define HSMCI_CFG_LSYNC (0x1u << 12) /**< \brief (HSMCI_CFG) Synchronize on the last block */
+/* -------- HSMCI_WPMR : (HSMCI Offset: 0xE4) Write Protection Mode Register -------- */
+#define HSMCI_WPMR_WP_EN (0x1u << 0) /**< \brief (HSMCI_WPMR) Write Protection Enable */
+#define HSMCI_WPMR_WP_KEY_Pos 8
+#define HSMCI_WPMR_WP_KEY_Msk (0xffffffu << HSMCI_WPMR_WP_KEY_Pos) /**< \brief (HSMCI_WPMR) Write Protection Key password */
+#define HSMCI_WPMR_WP_KEY(value) ((HSMCI_WPMR_WP_KEY_Msk & ((value) << HSMCI_WPMR_WP_KEY_Pos)))
+/* -------- HSMCI_WPSR : (HSMCI Offset: 0xE8) Write Protection Status Register -------- */
+#define HSMCI_WPSR_WP_VS_Pos 0
+#define HSMCI_WPSR_WP_VS_Msk (0xfu << HSMCI_WPSR_WP_VS_Pos) /**< \brief (HSMCI_WPSR) Write Protection Violation Status */
+#define HSMCI_WPSR_WP_VS_NONE (0x0u << 0) /**< \brief (HSMCI_WPSR) No Write Protection Violation occurred since the last read of this register (WP_SR) */
+#define HSMCI_WPSR_WP_VS_WRITE (0x1u << 0) /**< \brief (HSMCI_WPSR) Write Protection detected unauthorized attempt to write a control register had occurred (since the last read.) */
+#define HSMCI_WPSR_WP_VS_RESET (0x2u << 0) /**< \brief (HSMCI_WPSR) Software reset had been performed while Write Protection was enabled (since the last read). */
+#define HSMCI_WPSR_WP_VS_BOTH (0x3u << 0) /**< \brief (HSMCI_WPSR) Both Write Protection violation and software reset with Write Protection enabled have occurred since the last read. */
+#define HSMCI_WPSR_WP_VSRC_Pos 8
+#define HSMCI_WPSR_WP_VSRC_Msk (0xffffu << HSMCI_WPSR_WP_VSRC_Pos) /**< \brief (HSMCI_WPSR) Write Protection Violation SouRCe */
+/* -------- HSMCI_RPR : (HSMCI Offset: 0x100) Receive Pointer Register -------- */
+#define HSMCI_RPR_RXPTR_Pos 0
+#define HSMCI_RPR_RXPTR_Msk (0xffffffffu << HSMCI_RPR_RXPTR_Pos) /**< \brief (HSMCI_RPR) Receive Pointer Register */
+#define HSMCI_RPR_RXPTR(value) ((HSMCI_RPR_RXPTR_Msk & ((value) << HSMCI_RPR_RXPTR_Pos)))
+/* -------- HSMCI_RCR : (HSMCI Offset: 0x104) Receive Counter Register -------- */
+#define HSMCI_RCR_RXCTR_Pos 0
+#define HSMCI_RCR_RXCTR_Msk (0xffffu << HSMCI_RCR_RXCTR_Pos) /**< \brief (HSMCI_RCR) Receive Counter Register */
+#define HSMCI_RCR_RXCTR(value) ((HSMCI_RCR_RXCTR_Msk & ((value) << HSMCI_RCR_RXCTR_Pos)))
+/* -------- HSMCI_TPR : (HSMCI Offset: 0x108) Transmit Pointer Register -------- */
+#define HSMCI_TPR_TXPTR_Pos 0
+#define HSMCI_TPR_TXPTR_Msk (0xffffffffu << HSMCI_TPR_TXPTR_Pos) /**< \brief (HSMCI_TPR) Transmit Counter Register */
+#define HSMCI_TPR_TXPTR(value) ((HSMCI_TPR_TXPTR_Msk & ((value) << HSMCI_TPR_TXPTR_Pos)))
+/* -------- HSMCI_TCR : (HSMCI Offset: 0x10C) Transmit Counter Register -------- */
+#define HSMCI_TCR_TXCTR_Pos 0
+#define HSMCI_TCR_TXCTR_Msk (0xffffu << HSMCI_TCR_TXCTR_Pos) /**< \brief (HSMCI_TCR) Transmit Counter Register */
+#define HSMCI_TCR_TXCTR(value) ((HSMCI_TCR_TXCTR_Msk & ((value) << HSMCI_TCR_TXCTR_Pos)))
+/* -------- HSMCI_RNPR : (HSMCI Offset: 0x110) Receive Next Pointer Register -------- */
+#define HSMCI_RNPR_RXNPTR_Pos 0
+#define HSMCI_RNPR_RXNPTR_Msk (0xffffffffu << HSMCI_RNPR_RXNPTR_Pos) /**< \brief (HSMCI_RNPR) Receive Next Pointer */
+#define HSMCI_RNPR_RXNPTR(value) ((HSMCI_RNPR_RXNPTR_Msk & ((value) << HSMCI_RNPR_RXNPTR_Pos)))
+/* -------- HSMCI_RNCR : (HSMCI Offset: 0x114) Receive Next Counter Register -------- */
+#define HSMCI_RNCR_RXNCTR_Pos 0
+#define HSMCI_RNCR_RXNCTR_Msk (0xffffu << HSMCI_RNCR_RXNCTR_Pos) /**< \brief (HSMCI_RNCR) Receive Next Counter */
+#define HSMCI_RNCR_RXNCTR(value) ((HSMCI_RNCR_RXNCTR_Msk & ((value) << HSMCI_RNCR_RXNCTR_Pos)))
+/* -------- HSMCI_TNPR : (HSMCI Offset: 0x118) Transmit Next Pointer Register -------- */
+#define HSMCI_TNPR_TXNPTR_Pos 0
+#define HSMCI_TNPR_TXNPTR_Msk (0xffffffffu << HSMCI_TNPR_TXNPTR_Pos) /**< \brief (HSMCI_TNPR) Transmit Next Pointer */
+#define HSMCI_TNPR_TXNPTR(value) ((HSMCI_TNPR_TXNPTR_Msk & ((value) << HSMCI_TNPR_TXNPTR_Pos)))
+/* -------- HSMCI_TNCR : (HSMCI Offset: 0x11C) Transmit Next Counter Register -------- */
+#define HSMCI_TNCR_TXNCTR_Pos 0
+#define HSMCI_TNCR_TXNCTR_Msk (0xffffu << HSMCI_TNCR_TXNCTR_Pos) /**< \brief (HSMCI_TNCR) Transmit Counter Next */
+#define HSMCI_TNCR_TXNCTR(value) ((HSMCI_TNCR_TXNCTR_Msk & ((value) << HSMCI_TNCR_TXNCTR_Pos)))
+/* -------- HSMCI_PTCR : (HSMCI Offset: 0x120) Transfer Control Register -------- */
+#define HSMCI_PTCR_RXTEN (0x1u << 0) /**< \brief (HSMCI_PTCR) Receiver Transfer Enable */
+#define HSMCI_PTCR_RXTDIS (0x1u << 1) /**< \brief (HSMCI_PTCR) Receiver Transfer Disable */
+#define HSMCI_PTCR_TXTEN (0x1u << 8) /**< \brief (HSMCI_PTCR) Transmitter Transfer Enable */
+#define HSMCI_PTCR_TXTDIS (0x1u << 9) /**< \brief (HSMCI_PTCR) Transmitter Transfer Disable */
+/* -------- HSMCI_PTSR : (HSMCI Offset: 0x124) Transfer Status Register -------- */
+#define HSMCI_PTSR_RXTEN (0x1u << 0) /**< \brief (HSMCI_PTSR) Receiver Transfer Enable */
+#define HSMCI_PTSR_TXTEN (0x1u << 8) /**< \brief (HSMCI_PTSR) Transmitter Transfer Enable */
+/* -------- HSMCI_FIFO[256] : (HSMCI Offset: 0x200) FIFO Memory Aperture0 -------- */
+#define HSMCI_FIFO_DATA_Pos 0
+#define HSMCI_FIFO_DATA_Msk (0xffffffffu << HSMCI_FIFO_DATA_Pos) /**< \brief (HSMCI_FIFO[256]) Data to Read or Data to Write */
+#define HSMCI_FIFO_DATA(value) ((HSMCI_FIFO_DATA_Msk & ((value) << HSMCI_FIFO_DATA_Pos)))
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR AHB Bus Matrix */
+/* ============================================================================= */
+/** \addtogroup SAM3S_MATRIX AHB Bus Matrix */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Matrix hardware registers */
+typedef struct {
+ RwReg MATRIX_MCFG[4]; /**< \brief (Matrix Offset: 0x0000) Master Configuration Register */
+ RwReg Reserved1[12];
+ RwReg MATRIX_SCFG[5]; /**< \brief (Matrix Offset: 0x0040) Slave Configuration Register */
+ RwReg Reserved2[11];
+ RwReg MATRIX_PRAS0; /**< \brief (Matrix Offset: 0x0080) Priority Register A for Slave 0 */
+ RwReg Reserved3[1];
+ RwReg MATRIX_PRAS1; /**< \brief (Matrix Offset: 0x0088) Priority Register A for Slave 1 */
+ RwReg Reserved4[1];
+ RwReg MATRIX_PRAS2; /**< \brief (Matrix Offset: 0x0090) Priority Register A for Slave 2 */
+ RwReg Reserved5[1];
+ RwReg MATRIX_PRAS3; /**< \brief (Matrix Offset: 0x0098) Priority Register A for Slave 3 */
+ RwReg Reserved6[1];
+ RwReg MATRIX_PRAS4; /**< \brief (Matrix Offset: 0x00A0) Priority Register A for Slave 4 */
+ RwReg Reserved7[1];
+ RwReg Reserved8[27];
+ RwReg CCFG_SYSIO; /**< \brief (Matrix Offset: 0x0114) System I/O Configuration register */
+ RwReg Reserved9[1];
+ RwReg CCFG_SMCNFCS; /**< \brief (Matrix Offset: 0x011C) SMC Chip Select NAND Flash Assignment Register */
+ RwReg Reserved10[49];
+ RwReg MATRIX_WPMR; /**< \brief (Matrix Offset: 0x1E4) Write Protect Mode Register */
+ RoReg MATRIX_WPSR; /**< \brief (Matrix Offset: 0x1E8) Write Protect Status Register */
+} Matrix;
+#endif /* __ASSEMBLY__ */
+/* -------- MATRIX_MCFG[4] : (MATRIX Offset: 0x0000) Master Configuration Register -------- */
+#define MATRIX_MCFG_ULBT_Pos 0
+#define MATRIX_MCFG_ULBT_Msk (0x7u << MATRIX_MCFG_ULBT_Pos) /**< \brief (MATRIX_MCFG[4]) Undefined Length Burst Type */
+#define MATRIX_MCFG_ULBT(value) ((MATRIX_MCFG_ULBT_Msk & ((value) << MATRIX_MCFG_ULBT_Pos)))
+/* -------- MATRIX_SCFG[5] : (MATRIX Offset: 0x0040) Slave Configuration Register -------- */
+#define MATRIX_SCFG_SLOT_CYCLE_Pos 0
+#define MATRIX_SCFG_SLOT_CYCLE_Msk (0xffu << MATRIX_SCFG_SLOT_CYCLE_Pos) /**< \brief (MATRIX_SCFG[5]) Maximum Number of Allowed Cycles for a Burst */
+#define MATRIX_SCFG_SLOT_CYCLE(value) ((MATRIX_SCFG_SLOT_CYCLE_Msk & ((value) << MATRIX_SCFG_SLOT_CYCLE_Pos)))
+#define MATRIX_SCFG_DEFMSTR_TYPE_Pos 16
+#define MATRIX_SCFG_DEFMSTR_TYPE_Msk (0x3u << MATRIX_SCFG_DEFMSTR_TYPE_Pos) /**< \brief (MATRIX_SCFG[5]) Default Master Type */
+#define MATRIX_SCFG_DEFMSTR_TYPE(value) ((MATRIX_SCFG_DEFMSTR_TYPE_Msk & ((value) << MATRIX_SCFG_DEFMSTR_TYPE_Pos)))
+#define MATRIX_SCFG_FIXED_DEFMSTR_Pos 18
+#define MATRIX_SCFG_FIXED_DEFMSTR_Msk (0x7u << MATRIX_SCFG_FIXED_DEFMSTR_Pos) /**< \brief (MATRIX_SCFG[5]) Fixed Default Master */
+#define MATRIX_SCFG_FIXED_DEFMSTR(value) ((MATRIX_SCFG_FIXED_DEFMSTR_Msk & ((value) << MATRIX_SCFG_FIXED_DEFMSTR_Pos)))
+#define MATRIX_SCFG_ARBT_Pos 24
+#define MATRIX_SCFG_ARBT_Msk (0x3u << MATRIX_SCFG_ARBT_Pos) /**< \brief (MATRIX_SCFG[5]) Arbitration Type */
+#define MATRIX_SCFG_ARBT(value) ((MATRIX_SCFG_ARBT_Msk & ((value) << MATRIX_SCFG_ARBT_Pos)))
+/* -------- MATRIX_PRAS0 : (MATRIX Offset: 0x0080) Priority Register A for Slave 0 -------- */
+#define MATRIX_PRAS0_M0PR_Pos 0
+#define MATRIX_PRAS0_M0PR_Msk (0x3u << MATRIX_PRAS0_M0PR_Pos) /**< \brief (MATRIX_PRAS0) Master 0 Priority */
+#define MATRIX_PRAS0_M0PR(value) ((MATRIX_PRAS0_M0PR_Msk & ((value) << MATRIX_PRAS0_M0PR_Pos)))
+#define MATRIX_PRAS0_M1PR_Pos 4
+#define MATRIX_PRAS0_M1PR_Msk (0x3u << MATRIX_PRAS0_M1PR_Pos) /**< \brief (MATRIX_PRAS0) Master 1 Priority */
+#define MATRIX_PRAS0_M1PR(value) ((MATRIX_PRAS0_M1PR_Msk & ((value) << MATRIX_PRAS0_M1PR_Pos)))
+#define MATRIX_PRAS0_M2PR_Pos 8
+#define MATRIX_PRAS0_M2PR_Msk (0x3u << MATRIX_PRAS0_M2PR_Pos) /**< \brief (MATRIX_PRAS0) Master 2 Priority */
+#define MATRIX_PRAS0_M2PR(value) ((MATRIX_PRAS0_M2PR_Msk & ((value) << MATRIX_PRAS0_M2PR_Pos)))
+#define MATRIX_PRAS0_M3PR_Pos 12
+#define MATRIX_PRAS0_M3PR_Msk (0x3u << MATRIX_PRAS0_M3PR_Pos) /**< \brief (MATRIX_PRAS0) Master 3 Priority */
+#define MATRIX_PRAS0_M3PR(value) ((MATRIX_PRAS0_M3PR_Msk & ((value) << MATRIX_PRAS0_M3PR_Pos)))
+#define MATRIX_PRAS0_M4PR_Pos 16
+#define MATRIX_PRAS0_M4PR_Msk (0x3u << MATRIX_PRAS0_M4PR_Pos) /**< \brief (MATRIX_PRAS0) Master 4 Priority */
+#define MATRIX_PRAS0_M4PR(value) ((MATRIX_PRAS0_M4PR_Msk & ((value) << MATRIX_PRAS0_M4PR_Pos)))
+/* -------- MATRIX_PRAS1 : (MATRIX Offset: 0x0088) Priority Register A for Slave 1 -------- */
+#define MATRIX_PRAS1_M0PR_Pos 0
+#define MATRIX_PRAS1_M0PR_Msk (0x3u << MATRIX_PRAS1_M0PR_Pos) /**< \brief (MATRIX_PRAS1) Master 0 Priority */
+#define MATRIX_PRAS1_M0PR(value) ((MATRIX_PRAS1_M0PR_Msk & ((value) << MATRIX_PRAS1_M0PR_Pos)))
+#define MATRIX_PRAS1_M1PR_Pos 4
+#define MATRIX_PRAS1_M1PR_Msk (0x3u << MATRIX_PRAS1_M1PR_Pos) /**< \brief (MATRIX_PRAS1) Master 1 Priority */
+#define MATRIX_PRAS1_M1PR(value) ((MATRIX_PRAS1_M1PR_Msk & ((value) << MATRIX_PRAS1_M1PR_Pos)))
+#define MATRIX_PRAS1_M2PR_Pos 8
+#define MATRIX_PRAS1_M2PR_Msk (0x3u << MATRIX_PRAS1_M2PR_Pos) /**< \brief (MATRIX_PRAS1) Master 2 Priority */
+#define MATRIX_PRAS1_M2PR(value) ((MATRIX_PRAS1_M2PR_Msk & ((value) << MATRIX_PRAS1_M2PR_Pos)))
+#define MATRIX_PRAS1_M3PR_Pos 12
+#define MATRIX_PRAS1_M3PR_Msk (0x3u << MATRIX_PRAS1_M3PR_Pos) /**< \brief (MATRIX_PRAS1) Master 3 Priority */
+#define MATRIX_PRAS1_M3PR(value) ((MATRIX_PRAS1_M3PR_Msk & ((value) << MATRIX_PRAS1_M3PR_Pos)))
+#define MATRIX_PRAS1_M4PR_Pos 16
+#define MATRIX_PRAS1_M4PR_Msk (0x3u << MATRIX_PRAS1_M4PR_Pos) /**< \brief (MATRIX_PRAS1) Master 4 Priority */
+#define MATRIX_PRAS1_M4PR(value) ((MATRIX_PRAS1_M4PR_Msk & ((value) << MATRIX_PRAS1_M4PR_Pos)))
+/* -------- MATRIX_PRAS2 : (MATRIX Offset: 0x0090) Priority Register A for Slave 2 -------- */
+#define MATRIX_PRAS2_M0PR_Pos 0
+#define MATRIX_PRAS2_M0PR_Msk (0x3u << MATRIX_PRAS2_M0PR_Pos) /**< \brief (MATRIX_PRAS2) Master 0 Priority */
+#define MATRIX_PRAS2_M0PR(value) ((MATRIX_PRAS2_M0PR_Msk & ((value) << MATRIX_PRAS2_M0PR_Pos)))
+#define MATRIX_PRAS2_M1PR_Pos 4
+#define MATRIX_PRAS2_M1PR_Msk (0x3u << MATRIX_PRAS2_M1PR_Pos) /**< \brief (MATRIX_PRAS2) Master 1 Priority */
+#define MATRIX_PRAS2_M1PR(value) ((MATRIX_PRAS2_M1PR_Msk & ((value) << MATRIX_PRAS2_M1PR_Pos)))
+#define MATRIX_PRAS2_M2PR_Pos 8
+#define MATRIX_PRAS2_M2PR_Msk (0x3u << MATRIX_PRAS2_M2PR_Pos) /**< \brief (MATRIX_PRAS2) Master 2 Priority */
+#define MATRIX_PRAS2_M2PR(value) ((MATRIX_PRAS2_M2PR_Msk & ((value) << MATRIX_PRAS2_M2PR_Pos)))
+#define MATRIX_PRAS2_M3PR_Pos 12
+#define MATRIX_PRAS2_M3PR_Msk (0x3u << MATRIX_PRAS2_M3PR_Pos) /**< \brief (MATRIX_PRAS2) Master 3 Priority */
+#define MATRIX_PRAS2_M3PR(value) ((MATRIX_PRAS2_M3PR_Msk & ((value) << MATRIX_PRAS2_M3PR_Pos)))
+#define MATRIX_PRAS2_M4PR_Pos 16
+#define MATRIX_PRAS2_M4PR_Msk (0x3u << MATRIX_PRAS2_M4PR_Pos) /**< \brief (MATRIX_PRAS2) Master 4 Priority */
+#define MATRIX_PRAS2_M4PR(value) ((MATRIX_PRAS2_M4PR_Msk & ((value) << MATRIX_PRAS2_M4PR_Pos)))
+/* -------- MATRIX_PRAS3 : (MATRIX Offset: 0x0098) Priority Register A for Slave 3 -------- */
+#define MATRIX_PRAS3_M0PR_Pos 0
+#define MATRIX_PRAS3_M0PR_Msk (0x3u << MATRIX_PRAS3_M0PR_Pos) /**< \brief (MATRIX_PRAS3) Master 0 Priority */
+#define MATRIX_PRAS3_M0PR(value) ((MATRIX_PRAS3_M0PR_Msk & ((value) << MATRIX_PRAS3_M0PR_Pos)))
+#define MATRIX_PRAS3_M1PR_Pos 4
+#define MATRIX_PRAS3_M1PR_Msk (0x3u << MATRIX_PRAS3_M1PR_Pos) /**< \brief (MATRIX_PRAS3) Master 1 Priority */
+#define MATRIX_PRAS3_M1PR(value) ((MATRIX_PRAS3_M1PR_Msk & ((value) << MATRIX_PRAS3_M1PR_Pos)))
+#define MATRIX_PRAS3_M2PR_Pos 8
+#define MATRIX_PRAS3_M2PR_Msk (0x3u << MATRIX_PRAS3_M2PR_Pos) /**< \brief (MATRIX_PRAS3) Master 2 Priority */
+#define MATRIX_PRAS3_M2PR(value) ((MATRIX_PRAS3_M2PR_Msk & ((value) << MATRIX_PRAS3_M2PR_Pos)))
+#define MATRIX_PRAS3_M3PR_Pos 12
+#define MATRIX_PRAS3_M3PR_Msk (0x3u << MATRIX_PRAS3_M3PR_Pos) /**< \brief (MATRIX_PRAS3) Master 3 Priority */
+#define MATRIX_PRAS3_M3PR(value) ((MATRIX_PRAS3_M3PR_Msk & ((value) << MATRIX_PRAS3_M3PR_Pos)))
+#define MATRIX_PRAS3_M4PR_Pos 16
+#define MATRIX_PRAS3_M4PR_Msk (0x3u << MATRIX_PRAS3_M4PR_Pos) /**< \brief (MATRIX_PRAS3) Master 4 Priority */
+#define MATRIX_PRAS3_M4PR(value) ((MATRIX_PRAS3_M4PR_Msk & ((value) << MATRIX_PRAS3_M4PR_Pos)))
+/* -------- MATRIX_PRAS4 : (MATRIX Offset: 0x00A0) Priority Register A for Slave 4 -------- */
+#define MATRIX_PRAS4_M0PR_Pos 0
+#define MATRIX_PRAS4_M0PR_Msk (0x3u << MATRIX_PRAS4_M0PR_Pos) /**< \brief (MATRIX_PRAS4) Master 0 Priority */
+#define MATRIX_PRAS4_M0PR(value) ((MATRIX_PRAS4_M0PR_Msk & ((value) << MATRIX_PRAS4_M0PR_Pos)))
+#define MATRIX_PRAS4_M1PR_Pos 4
+#define MATRIX_PRAS4_M1PR_Msk (0x3u << MATRIX_PRAS4_M1PR_Pos) /**< \brief (MATRIX_PRAS4) Master 1 Priority */
+#define MATRIX_PRAS4_M1PR(value) ((MATRIX_PRAS4_M1PR_Msk & ((value) << MATRIX_PRAS4_M1PR_Pos)))
+#define MATRIX_PRAS4_M2PR_Pos 8
+#define MATRIX_PRAS4_M2PR_Msk (0x3u << MATRIX_PRAS4_M2PR_Pos) /**< \brief (MATRIX_PRAS4) Master 2 Priority */
+#define MATRIX_PRAS4_M2PR(value) ((MATRIX_PRAS4_M2PR_Msk & ((value) << MATRIX_PRAS4_M2PR_Pos)))
+#define MATRIX_PRAS4_M3PR_Pos 12
+#define MATRIX_PRAS4_M3PR_Msk (0x3u << MATRIX_PRAS4_M3PR_Pos) /**< \brief (MATRIX_PRAS4) Master 3 Priority */
+#define MATRIX_PRAS4_M3PR(value) ((MATRIX_PRAS4_M3PR_Msk & ((value) << MATRIX_PRAS4_M3PR_Pos)))
+#define MATRIX_PRAS4_M4PR_Pos 16
+#define MATRIX_PRAS4_M4PR_Msk (0x3u << MATRIX_PRAS4_M4PR_Pos) /**< \brief (MATRIX_PRAS4) Master 4 Priority */
+#define MATRIX_PRAS4_M4PR(value) ((MATRIX_PRAS4_M4PR_Msk & ((value) << MATRIX_PRAS4_M4PR_Pos)))
+/* -------- CCFG_SYSIO : (MATRIX Offset: 0x0114) System I/O Configuration register -------- */
+#define CCFG_SYSIO_SYSIO4 (0x1u << 4) /**< \brief (CCFG_SYSIO) PB4 or TDI Assignment */
+#define CCFG_SYSIO_SYSIO5 (0x1u << 5) /**< \brief (CCFG_SYSIO) PB5 or TDO/TRACESWO Assignment */
+#define CCFG_SYSIO_SYSIO6 (0x1u << 6) /**< \brief (CCFG_SYSIO) PB6 or TMS/SWDIO Assignment */
+#define CCFG_SYSIO_SYSIO7 (0x1u << 7) /**< \brief (CCFG_SYSIO) PB7 or TCK/SWCLK Assignment */
+#define CCFG_SYSIO_SYSIO10 (0x1u << 10) /**< \brief (CCFG_SYSIO) PB10 or DDM Assignment */
+#define CCFG_SYSIO_SYSIO11 (0x1u << 11) /**< \brief (CCFG_SYSIO) PB11 or DDP Assignment */
+#define CCFG_SYSIO_SYSIO12 (0x1u << 12) /**< \brief (CCFG_SYSIO) PB12 or ERASE Assignment */
+/* -------- CCFG_SMCNFCS : (MATRIX Offset: 0x011C) SMC Chip Select NAND Flash Assignment Register -------- */
+#define CCFG_SMCNFCS_SMC_NFCS0 (0x1u << 0) /**< \brief (CCFG_SMCNFCS) SMC NAND Flash Chip Select 0 Assignment */
+#define CCFG_SMCNFCS_SMC_NFCS1 (0x1u << 1) /**< \brief (CCFG_SMCNFCS) SMC NAND Flash Chip Select 1 Assignment */
+#define CCFG_SMCNFCS_SMC_NFCS2 (0x1u << 2) /**< \brief (CCFG_SMCNFCS) SMC NAND Flash Chip Select 2 Assignment */
+#define CCFG_SMCNFCS_SMC_NFCS3 (0x1u << 3) /**< \brief (CCFG_SMCNFCS) SMC NAND Flash Chip Select 3 Assignment */
+/* -------- MATRIX_WPMR : (MATRIX Offset: 0x1E4) Write Protect Mode Register -------- */
+#define MATRIX_WPMR_WPEN (0x1u << 0) /**< \brief (MATRIX_WPMR) Write Protect ENable */
+#define MATRIX_WPMR_WPKEY_Pos 8
+#define MATRIX_WPMR_WPKEY_Msk (0xffffffu << MATRIX_WPMR_WPKEY_Pos) /**< \brief (MATRIX_WPMR) Write Protect KEY (Write-only) */
+#define MATRIX_WPMR_WPKEY(value) ((MATRIX_WPMR_WPKEY_Msk & ((value) << MATRIX_WPMR_WPKEY_Pos)))
+/* -------- MATRIX_WPSR : (MATRIX Offset: 0x1E8) Write Protect Status Register -------- */
+#define MATRIX_WPSR_WPVS (0x1u << 0) /**< \brief (MATRIX_WPSR) Write Protect Violation Status */
+#define MATRIX_WPSR_WPVSRC_Pos 8
+#define MATRIX_WPSR_WPVSRC_Msk (0xffffu << MATRIX_WPSR_WPVSRC_Pos) /**< \brief (MATRIX_WPSR) Write Protect Violation Source */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Peripheral DMA Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_PDC Peripheral DMA Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Pdc hardware registers */
+typedef struct {
+ RwReg Reserved1[64];
+ RwReg PERIPH_RPR; /**< \brief (Pdc Offset: 0x100) Receive Pointer Register */
+ RwReg PERIPH_RCR; /**< \brief (Pdc Offset: 0x104) Receive Counter Register */
+ RwReg PERIPH_TPR; /**< \brief (Pdc Offset: 0x108) Transmit Pointer Register */
+ RwReg PERIPH_TCR; /**< \brief (Pdc Offset: 0x10C) Transmit Counter Register */
+ RwReg PERIPH_RNPR; /**< \brief (Pdc Offset: 0x110) Receive Next Pointer Register */
+ RwReg PERIPH_RNCR; /**< \brief (Pdc Offset: 0x114) Receive Next Counter Register */
+ RwReg PERIPH_TNPR; /**< \brief (Pdc Offset: 0x118) Transmit Next Pointer Register */
+ RwReg PERIPH_TNCR; /**< \brief (Pdc Offset: 0x11C) Transmit Next Counter Register */
+ WoReg PERIPH_PTCR; /**< \brief (Pdc Offset: 0x120) Transfer Control Register */
+ RoReg PERIPH_PTSR; /**< \brief (Pdc Offset: 0x124) Transfer Status Register */
+} Pdc;
+#endif /* __ASSEMBLY__ */
+/* -------- PERIPH_RPR : (PDC Offset: 0x100) Receive Pointer Register -------- */
+#define PERIPH_RPR_RXPTR_Pos 0
+#define PERIPH_RPR_RXPTR_Msk (0xffffffffu << PERIPH_RPR_RXPTR_Pos) /**< \brief (PERIPH_RPR) Receive Pointer Register */
+#define PERIPH_RPR_RXPTR(value) ((PERIPH_RPR_RXPTR_Msk & ((value) << PERIPH_RPR_RXPTR_Pos)))
+/* -------- PERIPH_RCR : (PDC Offset: 0x104) Receive Counter Register -------- */
+#define PERIPH_RCR_RXCTR_Pos 0
+#define PERIPH_RCR_RXCTR_Msk (0xffffu << PERIPH_RCR_RXCTR_Pos) /**< \brief (PERIPH_RCR) Receive Counter Register */
+#define PERIPH_RCR_RXCTR(value) ((PERIPH_RCR_RXCTR_Msk & ((value) << PERIPH_RCR_RXCTR_Pos)))
+/* -------- PERIPH_TPR : (PDC Offset: 0x108) Transmit Pointer Register -------- */
+#define PERIPH_TPR_TXPTR_Pos 0
+#define PERIPH_TPR_TXPTR_Msk (0xffffffffu << PERIPH_TPR_TXPTR_Pos) /**< \brief (PERIPH_TPR) Transmit Counter Register */
+#define PERIPH_TPR_TXPTR(value) ((PERIPH_TPR_TXPTR_Msk & ((value) << PERIPH_TPR_TXPTR_Pos)))
+/* -------- PERIPH_TCR : (PDC Offset: 0x10C) Transmit Counter Register -------- */
+#define PERIPH_TCR_TXCTR_Pos 0
+#define PERIPH_TCR_TXCTR_Msk (0xffffu << PERIPH_TCR_TXCTR_Pos) /**< \brief (PERIPH_TCR) Transmit Counter Register */
+#define PERIPH_TCR_TXCTR(value) ((PERIPH_TCR_TXCTR_Msk & ((value) << PERIPH_TCR_TXCTR_Pos)))
+/* -------- PERIPH_RNPR : (PDC Offset: 0x110) Receive Next Pointer Register -------- */
+#define PERIPH_RNPR_RXNPTR_Pos 0
+#define PERIPH_RNPR_RXNPTR_Msk (0xffffffffu << PERIPH_RNPR_RXNPTR_Pos) /**< \brief (PERIPH_RNPR) Receive Next Pointer */
+#define PERIPH_RNPR_RXNPTR(value) ((PERIPH_RNPR_RXNPTR_Msk & ((value) << PERIPH_RNPR_RXNPTR_Pos)))
+/* -------- PERIPH_RNCR : (PDC Offset: 0x114) Receive Next Counter Register -------- */
+#define PERIPH_RNCR_RXNCTR_Pos 0
+#define PERIPH_RNCR_RXNCTR_Msk (0xffffu << PERIPH_RNCR_RXNCTR_Pos) /**< \brief (PERIPH_RNCR) Receive Next Counter */
+#define PERIPH_RNCR_RXNCTR(value) ((PERIPH_RNCR_RXNCTR_Msk & ((value) << PERIPH_RNCR_RXNCTR_Pos)))
+/* -------- PERIPH_TNPR : (PDC Offset: 0x118) Transmit Next Pointer Register -------- */
+#define PERIPH_TNPR_TXNPTR_Pos 0
+#define PERIPH_TNPR_TXNPTR_Msk (0xffffffffu << PERIPH_TNPR_TXNPTR_Pos) /**< \brief (PERIPH_TNPR) Transmit Next Pointer */
+#define PERIPH_TNPR_TXNPTR(value) ((PERIPH_TNPR_TXNPTR_Msk & ((value) << PERIPH_TNPR_TXNPTR_Pos)))
+/* -------- PERIPH_TNCR : (PDC Offset: 0x11C) Transmit Next Counter Register -------- */
+#define PERIPH_TNCR_TXNCTR_Pos 0
+#define PERIPH_TNCR_TXNCTR_Msk (0xffffu << PERIPH_TNCR_TXNCTR_Pos) /**< \brief (PERIPH_TNCR) Transmit Counter Next */
+#define PERIPH_TNCR_TXNCTR(value) ((PERIPH_TNCR_TXNCTR_Msk & ((value) << PERIPH_TNCR_TXNCTR_Pos)))
+/* -------- PERIPH_PTCR : (PDC Offset: 0x120) Transfer Control Register -------- */
+#define PERIPH_PTCR_RXTEN (0x1u << 0) /**< \brief (PERIPH_PTCR) Receiver Transfer Enable */
+#define PERIPH_PTCR_RXTDIS (0x1u << 1) /**< \brief (PERIPH_PTCR) Receiver Transfer Disable */
+#define PERIPH_PTCR_TXTEN (0x1u << 8) /**< \brief (PERIPH_PTCR) Transmitter Transfer Enable */
+#define PERIPH_PTCR_TXTDIS (0x1u << 9) /**< \brief (PERIPH_PTCR) Transmitter Transfer Disable */
+/* -------- PERIPH_PTSR : (PDC Offset: 0x124) Transfer Status Register -------- */
+#define PERIPH_PTSR_RXTEN (0x1u << 0) /**< \brief (PERIPH_PTSR) Receiver Transfer Enable */
+#define PERIPH_PTSR_TXTEN (0x1u << 8) /**< \brief (PERIPH_PTSR) Transmitter Transfer Enable */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Parallel Input/Output */
+/* ============================================================================= */
+/** \addtogroup SAM3S_PIO Parallel Input/Output */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Pio hardware registers */
+typedef struct {
+ WoReg PIO_PER; /**< \brief (Pio Offset: 0x0000) PIO Enable Register */
+ WoReg PIO_PDR; /**< \brief (Pio Offset: 0x0004) PIO Disable Register */
+ RoReg PIO_PSR; /**< \brief (Pio Offset: 0x0008) PIO Status Register */
+ RwReg Reserved1[1];
+ WoReg PIO_OER; /**< \brief (Pio Offset: 0x0010) Output Enable Register */
+ WoReg PIO_ODR; /**< \brief (Pio Offset: 0x0014) Output Disable Register */
+ RoReg PIO_OSR; /**< \brief (Pio Offset: 0x0018) Output Status Register */
+ RwReg Reserved2[1];
+ WoReg PIO_IFER; /**< \brief (Pio Offset: 0x0020) Glitch Input Filter Enable Register */
+ WoReg PIO_IFDR; /**< \brief (Pio Offset: 0x0024) Glitch Input Filter Disable Register */
+ RoReg PIO_IFSR; /**< \brief (Pio Offset: 0x0028) Glitch Input Filter Status Register */
+ RwReg Reserved3[1];
+ WoReg PIO_SODR; /**< \brief (Pio Offset: 0x0030) Set Output Data Register */
+ WoReg PIO_CODR; /**< \brief (Pio Offset: 0x0034) Clear Output Data Register */
+ RwReg PIO_ODSR; /**< \brief (Pio Offset: 0x0038) Output Data Status Register */
+ RoReg PIO_PDSR; /**< \brief (Pio Offset: 0x003C) Pin Data Status Register */
+ WoReg PIO_IER; /**< \brief (Pio Offset: 0x0040) Interrupt Enable Register */
+ WoReg PIO_IDR; /**< \brief (Pio Offset: 0x0044) Interrupt Disable Register */
+ RoReg PIO_IMR; /**< \brief (Pio Offset: 0x0048) Interrupt Mask Register */
+ RoReg PIO_ISR; /**< \brief (Pio Offset: 0x004C) Interrupt Status Register */
+ WoReg PIO_MDER; /**< \brief (Pio Offset: 0x0050) Multi-driver Enable Register */
+ WoReg PIO_MDDR; /**< \brief (Pio Offset: 0x0054) Multi-driver Disable Register */
+ RoReg PIO_MDSR; /**< \brief (Pio Offset: 0x0058) Multi-driver Status Register */
+ RwReg Reserved4[1];
+ WoReg PIO_PUDR; /**< \brief (Pio Offset: 0x0060) Pull-up Disable Register */
+ WoReg PIO_PUER; /**< \brief (Pio Offset: 0x0064) Pull-up Enable Register */
+ RoReg PIO_PUSR; /**< \brief (Pio Offset: 0x0068) Pad Pull-up Status Register */
+ RwReg Reserved5[1];
+ RwReg PIO_ABCDSR[2]; /**< \brief (Pio Offset: 0x0070) Peripheral Select Register */
+ RwReg Reserved6[2];
+ WoReg PIO_IFSCDR; /**< \brief (Pio Offset: 0x0080) Input Filter Slow Clock Disable Register */
+ WoReg PIO_IFSCER; /**< \brief (Pio Offset: 0x0084) Input Filter Slow Clock Enable Register */
+ RoReg PIO_IFSCSR; /**< \brief (Pio Offset: 0x0088) Input Filter Slow Clock Status Register */
+ RwReg PIO_SCDR; /**< \brief (Pio Offset: 0x008C) Slow Clock Divider Debouncing Register */
+ WoReg PIO_PPDDR; /**< \brief (Pio Offset: 0x0090) Pad Pull-down Disable Register */
+ WoReg PIO_PPDER; /**< \brief (Pio Offset: 0x0094) Pad Pull-down Enable Register */
+ RoReg PIO_PPDSR; /**< \brief (Pio Offset: 0x0098) Pad Pull-down Status Register */
+ RwReg Reserved7[1];
+ WoReg PIO_OWER; /**< \brief (Pio Offset: 0x00A0) Output Write Enable */
+ WoReg PIO_OWDR; /**< \brief (Pio Offset: 0x00A4) Output Write Disable */
+ RoReg PIO_OWSR; /**< \brief (Pio Offset: 0x00A8) Output Write Status Register */
+ RwReg Reserved8[1];
+ WoReg PIO_AIMER; /**< \brief (Pio Offset: 0x00B0) Additional Interrupt Modes Enable Register */
+ WoReg PIO_AIMDR; /**< \brief (Pio Offset: 0x00B4) Additional Interrupt Modes Disables Register */
+ RoReg PIO_AIMMR; /**< \brief (Pio Offset: 0x00B8) Additional Interrupt Modes Mask Register */
+ RwReg Reserved9[1];
+ WoReg PIO_ESR; /**< \brief (Pio Offset: 0x00C0) Edge Select Register */
+ WoReg PIO_LSR; /**< \brief (Pio Offset: 0x00C4) Level Select Register */
+ RoReg PIO_ELSR; /**< \brief (Pio Offset: 0x00C8) Edge/Level Status Register */
+ RwReg Reserved10[1];
+ WoReg PIO_FELLSR; /**< \brief (Pio Offset: 0x00D0) Falling Edge/Low Level Select Register */
+ WoReg PIO_REHLSR; /**< \brief (Pio Offset: 0x00D4) Rising Edge/ High Level Select Register */
+ RoReg PIO_FRLHSR; /**< \brief (Pio Offset: 0x00D8) Fall/Rise - Low/High Status Register */
+ RwReg Reserved11[1];
+ RoReg PIO_LOCKSR; /**< \brief (Pio Offset: 0x00E0) Lock Status */
+ RwReg PIO_WPMR; /**< \brief (Pio Offset: 0x00E4) Write Protect Mode Register */
+ RoReg PIO_WPSR; /**< \brief (Pio Offset: 0x00E8) Write Protect Status Register */
+ RwReg Reserved12[5];
+ RwReg PIO_SCHMITT; /**< \brief (Pio Offset: 0x0100) Schmitt Trigger Register */
+ RwReg Reserved13[19];
+ RwReg PIO_PCMR; /**< \brief (Pio Offset: 0x150) Parallel Capture Mode Register */
+ WoReg PIO_PCIER; /**< \brief (Pio Offset: 0x154) Parallel Capture Interrupt Enable Register */
+ WoReg PIO_PCIDR; /**< \brief (Pio Offset: 0x158) Parallel Capture Interrupt Disable Register */
+ RoReg PIO_PCIMR; /**< \brief (Pio Offset: 0x15C) Parallel Capture Interrupt Mask Register */
+ RoReg PIO_PCISR; /**< \brief (Pio Offset: 0x160) Parallel Capture Interrupt Status Register */
+ RoReg PIO_PCRHR; /**< \brief (Pio Offset: 0x164) Parallel Capture Reception Holding Register */
+ RwReg PIO_RPR; /**< \brief (Pio Offset: 0x168) Receive Pointer Register */
+ RwReg PIO_RCR; /**< \brief (Pio Offset: 0x16C) Receive Counter Register */
+ RwReg PIO_TPR; /**< \brief (Pio Offset: 0x170) Transmit Pointer Register */
+ RwReg PIO_TCR; /**< \brief (Pio Offset: 0x174) Transmit Counter Register */
+ RwReg PIO_RNPR; /**< \brief (Pio Offset: 0x178) Receive Next Pointer Register */
+ RwReg PIO_RNCR; /**< \brief (Pio Offset: 0x17C) Receive Next Counter Register */
+ RwReg PIO_TNPR; /**< \brief (Pio Offset: 0x180) Transmit Next Pointer Register */
+ RwReg PIO_TNCR; /**< \brief (Pio Offset: 0x184) Transmit Next Counter Register */
+ WoReg PIO_PTCR; /**< \brief (Pio Offset: 0x188) Transfer Control Register */
+ RoReg PIO_PTSR; /**< \brief (Pio Offset: 0x18C) Transfer Status Register */
+} Pio;
+#endif /* __ASSEMBLY__ */
+/* -------- PIO_PER : (PIO Offset: 0x0000) PIO Enable Register -------- */
+#define PIO_PER_P0 (0x1u << 0) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P1 (0x1u << 1) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P2 (0x1u << 2) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P3 (0x1u << 3) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P4 (0x1u << 4) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P5 (0x1u << 5) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P6 (0x1u << 6) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P7 (0x1u << 7) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P8 (0x1u << 8) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P9 (0x1u << 9) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P10 (0x1u << 10) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P11 (0x1u << 11) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P12 (0x1u << 12) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P13 (0x1u << 13) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P14 (0x1u << 14) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P15 (0x1u << 15) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P16 (0x1u << 16) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P17 (0x1u << 17) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P18 (0x1u << 18) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P19 (0x1u << 19) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P20 (0x1u << 20) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P21 (0x1u << 21) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P22 (0x1u << 22) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P23 (0x1u << 23) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P24 (0x1u << 24) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P25 (0x1u << 25) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P26 (0x1u << 26) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P27 (0x1u << 27) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P28 (0x1u << 28) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P29 (0x1u << 29) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P30 (0x1u << 30) /**< \brief (PIO_PER) PIO Enable */
+#define PIO_PER_P31 (0x1u << 31) /**< \brief (PIO_PER) PIO Enable */
+/* -------- PIO_PDR : (PIO Offset: 0x0004) PIO Disable Register -------- */
+#define PIO_PDR_P0 (0x1u << 0) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P1 (0x1u << 1) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P2 (0x1u << 2) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P3 (0x1u << 3) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P4 (0x1u << 4) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P5 (0x1u << 5) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P6 (0x1u << 6) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P7 (0x1u << 7) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P8 (0x1u << 8) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P9 (0x1u << 9) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P10 (0x1u << 10) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P11 (0x1u << 11) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P12 (0x1u << 12) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P13 (0x1u << 13) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P14 (0x1u << 14) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P15 (0x1u << 15) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P16 (0x1u << 16) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P17 (0x1u << 17) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P18 (0x1u << 18) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P19 (0x1u << 19) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P20 (0x1u << 20) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P21 (0x1u << 21) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P22 (0x1u << 22) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P23 (0x1u << 23) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P24 (0x1u << 24) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P25 (0x1u << 25) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P26 (0x1u << 26) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P27 (0x1u << 27) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P28 (0x1u << 28) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P29 (0x1u << 29) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P30 (0x1u << 30) /**< \brief (PIO_PDR) PIO Disable */
+#define PIO_PDR_P31 (0x1u << 31) /**< \brief (PIO_PDR) PIO Disable */
+/* -------- PIO_PSR : (PIO Offset: 0x0008) PIO Status Register -------- */
+#define PIO_PSR_P0 (0x1u << 0) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P1 (0x1u << 1) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P2 (0x1u << 2) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P3 (0x1u << 3) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P4 (0x1u << 4) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P5 (0x1u << 5) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P6 (0x1u << 6) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P7 (0x1u << 7) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P8 (0x1u << 8) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P9 (0x1u << 9) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P10 (0x1u << 10) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P11 (0x1u << 11) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P12 (0x1u << 12) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P13 (0x1u << 13) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P14 (0x1u << 14) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P15 (0x1u << 15) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P16 (0x1u << 16) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P17 (0x1u << 17) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P18 (0x1u << 18) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P19 (0x1u << 19) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P20 (0x1u << 20) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P21 (0x1u << 21) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P22 (0x1u << 22) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P23 (0x1u << 23) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P24 (0x1u << 24) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P25 (0x1u << 25) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P26 (0x1u << 26) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P27 (0x1u << 27) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P28 (0x1u << 28) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P29 (0x1u << 29) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P30 (0x1u << 30) /**< \brief (PIO_PSR) PIO Status */
+#define PIO_PSR_P31 (0x1u << 31) /**< \brief (PIO_PSR) PIO Status */
+/* -------- PIO_OER : (PIO Offset: 0x0010) Output Enable Register -------- */
+#define PIO_OER_P0 (0x1u << 0) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P1 (0x1u << 1) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P2 (0x1u << 2) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P3 (0x1u << 3) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P4 (0x1u << 4) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P5 (0x1u << 5) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P6 (0x1u << 6) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P7 (0x1u << 7) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P8 (0x1u << 8) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P9 (0x1u << 9) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P10 (0x1u << 10) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P11 (0x1u << 11) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P12 (0x1u << 12) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P13 (0x1u << 13) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P14 (0x1u << 14) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P15 (0x1u << 15) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P16 (0x1u << 16) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P17 (0x1u << 17) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P18 (0x1u << 18) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P19 (0x1u << 19) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P20 (0x1u << 20) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P21 (0x1u << 21) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P22 (0x1u << 22) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P23 (0x1u << 23) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P24 (0x1u << 24) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P25 (0x1u << 25) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P26 (0x1u << 26) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P27 (0x1u << 27) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P28 (0x1u << 28) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P29 (0x1u << 29) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P30 (0x1u << 30) /**< \brief (PIO_OER) Output Enable */
+#define PIO_OER_P31 (0x1u << 31) /**< \brief (PIO_OER) Output Enable */
+/* -------- PIO_ODR : (PIO Offset: 0x0014) Output Disable Register -------- */
+#define PIO_ODR_P0 (0x1u << 0) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P1 (0x1u << 1) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P2 (0x1u << 2) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P3 (0x1u << 3) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P4 (0x1u << 4) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P5 (0x1u << 5) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P6 (0x1u << 6) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P7 (0x1u << 7) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P8 (0x1u << 8) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P9 (0x1u << 9) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P10 (0x1u << 10) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P11 (0x1u << 11) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P12 (0x1u << 12) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P13 (0x1u << 13) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P14 (0x1u << 14) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P15 (0x1u << 15) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P16 (0x1u << 16) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P17 (0x1u << 17) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P18 (0x1u << 18) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P19 (0x1u << 19) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P20 (0x1u << 20) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P21 (0x1u << 21) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P22 (0x1u << 22) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P23 (0x1u << 23) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P24 (0x1u << 24) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P25 (0x1u << 25) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P26 (0x1u << 26) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P27 (0x1u << 27) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P28 (0x1u << 28) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P29 (0x1u << 29) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P30 (0x1u << 30) /**< \brief (PIO_ODR) Output Disable */
+#define PIO_ODR_P31 (0x1u << 31) /**< \brief (PIO_ODR) Output Disable */
+/* -------- PIO_OSR : (PIO Offset: 0x0018) Output Status Register -------- */
+#define PIO_OSR_P0 (0x1u << 0) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P1 (0x1u << 1) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P2 (0x1u << 2) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P3 (0x1u << 3) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P4 (0x1u << 4) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P5 (0x1u << 5) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P6 (0x1u << 6) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P7 (0x1u << 7) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P8 (0x1u << 8) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P9 (0x1u << 9) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P10 (0x1u << 10) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P11 (0x1u << 11) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P12 (0x1u << 12) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P13 (0x1u << 13) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P14 (0x1u << 14) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P15 (0x1u << 15) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P16 (0x1u << 16) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P17 (0x1u << 17) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P18 (0x1u << 18) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P19 (0x1u << 19) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P20 (0x1u << 20) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P21 (0x1u << 21) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P22 (0x1u << 22) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P23 (0x1u << 23) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P24 (0x1u << 24) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P25 (0x1u << 25) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P26 (0x1u << 26) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P27 (0x1u << 27) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P28 (0x1u << 28) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P29 (0x1u << 29) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P30 (0x1u << 30) /**< \brief (PIO_OSR) Output Status */
+#define PIO_OSR_P31 (0x1u << 31) /**< \brief (PIO_OSR) Output Status */
+/* -------- PIO_IFER : (PIO Offset: 0x0020) Glitch Input Filter Enable Register -------- */
+#define PIO_IFER_P0 (0x1u << 0) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P1 (0x1u << 1) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P2 (0x1u << 2) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P3 (0x1u << 3) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P4 (0x1u << 4) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P5 (0x1u << 5) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P6 (0x1u << 6) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P7 (0x1u << 7) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P8 (0x1u << 8) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P9 (0x1u << 9) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P10 (0x1u << 10) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P11 (0x1u << 11) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P12 (0x1u << 12) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P13 (0x1u << 13) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P14 (0x1u << 14) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P15 (0x1u << 15) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P16 (0x1u << 16) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P17 (0x1u << 17) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P18 (0x1u << 18) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P19 (0x1u << 19) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P20 (0x1u << 20) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P21 (0x1u << 21) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P22 (0x1u << 22) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P23 (0x1u << 23) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P24 (0x1u << 24) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P25 (0x1u << 25) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P26 (0x1u << 26) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P27 (0x1u << 27) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P28 (0x1u << 28) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P29 (0x1u << 29) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P30 (0x1u << 30) /**< \brief (PIO_IFER) Input Filter Enable */
+#define PIO_IFER_P31 (0x1u << 31) /**< \brief (PIO_IFER) Input Filter Enable */
+/* -------- PIO_IFDR : (PIO Offset: 0x0024) Glitch Input Filter Disable Register -------- */
+#define PIO_IFDR_P0 (0x1u << 0) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P1 (0x1u << 1) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P2 (0x1u << 2) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P3 (0x1u << 3) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P4 (0x1u << 4) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P5 (0x1u << 5) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P6 (0x1u << 6) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P7 (0x1u << 7) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P8 (0x1u << 8) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P9 (0x1u << 9) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P10 (0x1u << 10) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P11 (0x1u << 11) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P12 (0x1u << 12) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P13 (0x1u << 13) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P14 (0x1u << 14) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P15 (0x1u << 15) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P16 (0x1u << 16) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P17 (0x1u << 17) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P18 (0x1u << 18) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P19 (0x1u << 19) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P20 (0x1u << 20) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P21 (0x1u << 21) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P22 (0x1u << 22) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P23 (0x1u << 23) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P24 (0x1u << 24) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P25 (0x1u << 25) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P26 (0x1u << 26) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P27 (0x1u << 27) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P28 (0x1u << 28) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P29 (0x1u << 29) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P30 (0x1u << 30) /**< \brief (PIO_IFDR) Input Filter Disable */
+#define PIO_IFDR_P31 (0x1u << 31) /**< \brief (PIO_IFDR) Input Filter Disable */
+/* -------- PIO_IFSR : (PIO Offset: 0x0028) Glitch Input Filter Status Register -------- */
+#define PIO_IFSR_P0 (0x1u << 0) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P1 (0x1u << 1) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P2 (0x1u << 2) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P3 (0x1u << 3) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P4 (0x1u << 4) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P5 (0x1u << 5) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P6 (0x1u << 6) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P7 (0x1u << 7) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P8 (0x1u << 8) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P9 (0x1u << 9) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P10 (0x1u << 10) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P11 (0x1u << 11) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P12 (0x1u << 12) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P13 (0x1u << 13) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P14 (0x1u << 14) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P15 (0x1u << 15) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P16 (0x1u << 16) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P17 (0x1u << 17) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P18 (0x1u << 18) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P19 (0x1u << 19) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P20 (0x1u << 20) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P21 (0x1u << 21) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P22 (0x1u << 22) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P23 (0x1u << 23) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P24 (0x1u << 24) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P25 (0x1u << 25) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P26 (0x1u << 26) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P27 (0x1u << 27) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P28 (0x1u << 28) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P29 (0x1u << 29) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P30 (0x1u << 30) /**< \brief (PIO_IFSR) Input Filer Status */
+#define PIO_IFSR_P31 (0x1u << 31) /**< \brief (PIO_IFSR) Input Filer Status */
+/* -------- PIO_SODR : (PIO Offset: 0x0030) Set Output Data Register -------- */
+#define PIO_SODR_P0 (0x1u << 0) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P1 (0x1u << 1) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P2 (0x1u << 2) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P3 (0x1u << 3) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P4 (0x1u << 4) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P5 (0x1u << 5) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P6 (0x1u << 6) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P7 (0x1u << 7) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P8 (0x1u << 8) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P9 (0x1u << 9) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P10 (0x1u << 10) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P11 (0x1u << 11) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P12 (0x1u << 12) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P13 (0x1u << 13) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P14 (0x1u << 14) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P15 (0x1u << 15) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P16 (0x1u << 16) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P17 (0x1u << 17) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P18 (0x1u << 18) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P19 (0x1u << 19) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P20 (0x1u << 20) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P21 (0x1u << 21) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P22 (0x1u << 22) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P23 (0x1u << 23) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P24 (0x1u << 24) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P25 (0x1u << 25) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P26 (0x1u << 26) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P27 (0x1u << 27) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P28 (0x1u << 28) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P29 (0x1u << 29) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P30 (0x1u << 30) /**< \brief (PIO_SODR) Set Output Data */
+#define PIO_SODR_P31 (0x1u << 31) /**< \brief (PIO_SODR) Set Output Data */
+/* -------- PIO_CODR : (PIO Offset: 0x0034) Clear Output Data Register -------- */
+#define PIO_CODR_P0 (0x1u << 0) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P1 (0x1u << 1) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P2 (0x1u << 2) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P3 (0x1u << 3) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P4 (0x1u << 4) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P5 (0x1u << 5) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P6 (0x1u << 6) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P7 (0x1u << 7) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P8 (0x1u << 8) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P9 (0x1u << 9) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P10 (0x1u << 10) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P11 (0x1u << 11) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P12 (0x1u << 12) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P13 (0x1u << 13) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P14 (0x1u << 14) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P15 (0x1u << 15) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P16 (0x1u << 16) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P17 (0x1u << 17) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P18 (0x1u << 18) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P19 (0x1u << 19) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P20 (0x1u << 20) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P21 (0x1u << 21) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P22 (0x1u << 22) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P23 (0x1u << 23) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P24 (0x1u << 24) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P25 (0x1u << 25) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P26 (0x1u << 26) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P27 (0x1u << 27) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P28 (0x1u << 28) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P29 (0x1u << 29) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P30 (0x1u << 30) /**< \brief (PIO_CODR) Clear Output Data */
+#define PIO_CODR_P31 (0x1u << 31) /**< \brief (PIO_CODR) Clear Output Data */
+/* -------- PIO_ODSR : (PIO Offset: 0x0038) Output Data Status Register -------- */
+#define PIO_ODSR_P0 (0x1u << 0) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P1 (0x1u << 1) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P2 (0x1u << 2) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P3 (0x1u << 3) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P4 (0x1u << 4) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P5 (0x1u << 5) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P6 (0x1u << 6) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P7 (0x1u << 7) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P8 (0x1u << 8) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P9 (0x1u << 9) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P10 (0x1u << 10) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P11 (0x1u << 11) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P12 (0x1u << 12) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P13 (0x1u << 13) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P14 (0x1u << 14) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P15 (0x1u << 15) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P16 (0x1u << 16) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P17 (0x1u << 17) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P18 (0x1u << 18) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P19 (0x1u << 19) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P20 (0x1u << 20) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P21 (0x1u << 21) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P22 (0x1u << 22) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P23 (0x1u << 23) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P24 (0x1u << 24) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P25 (0x1u << 25) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P26 (0x1u << 26) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P27 (0x1u << 27) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P28 (0x1u << 28) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P29 (0x1u << 29) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P30 (0x1u << 30) /**< \brief (PIO_ODSR) Output Data Status */
+#define PIO_ODSR_P31 (0x1u << 31) /**< \brief (PIO_ODSR) Output Data Status */
+/* -------- PIO_PDSR : (PIO Offset: 0x003C) Pin Data Status Register -------- */
+#define PIO_PDSR_P0 (0x1u << 0) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P1 (0x1u << 1) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P2 (0x1u << 2) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P3 (0x1u << 3) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P4 (0x1u << 4) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P5 (0x1u << 5) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P6 (0x1u << 6) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P7 (0x1u << 7) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P8 (0x1u << 8) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P9 (0x1u << 9) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P10 (0x1u << 10) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P11 (0x1u << 11) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P12 (0x1u << 12) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P13 (0x1u << 13) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P14 (0x1u << 14) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P15 (0x1u << 15) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P16 (0x1u << 16) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P17 (0x1u << 17) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P18 (0x1u << 18) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P19 (0x1u << 19) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P20 (0x1u << 20) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P21 (0x1u << 21) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P22 (0x1u << 22) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P23 (0x1u << 23) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P24 (0x1u << 24) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P25 (0x1u << 25) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P26 (0x1u << 26) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P27 (0x1u << 27) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P28 (0x1u << 28) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P29 (0x1u << 29) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P30 (0x1u << 30) /**< \brief (PIO_PDSR) Output Data Status */
+#define PIO_PDSR_P31 (0x1u << 31) /**< \brief (PIO_PDSR) Output Data Status */
+/* -------- PIO_IER : (PIO Offset: 0x0040) Interrupt Enable Register -------- */
+#define PIO_IER_P0 (0x1u << 0) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P1 (0x1u << 1) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P2 (0x1u << 2) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P3 (0x1u << 3) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P4 (0x1u << 4) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P5 (0x1u << 5) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P6 (0x1u << 6) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P7 (0x1u << 7) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P8 (0x1u << 8) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P9 (0x1u << 9) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P10 (0x1u << 10) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P11 (0x1u << 11) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P12 (0x1u << 12) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P13 (0x1u << 13) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P14 (0x1u << 14) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P15 (0x1u << 15) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P16 (0x1u << 16) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P17 (0x1u << 17) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P18 (0x1u << 18) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P19 (0x1u << 19) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P20 (0x1u << 20) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P21 (0x1u << 21) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P22 (0x1u << 22) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P23 (0x1u << 23) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P24 (0x1u << 24) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P25 (0x1u << 25) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P26 (0x1u << 26) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P27 (0x1u << 27) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P28 (0x1u << 28) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P29 (0x1u << 29) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P30 (0x1u << 30) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+#define PIO_IER_P31 (0x1u << 31) /**< \brief (PIO_IER) Input Change Interrupt Enable */
+/* -------- PIO_IDR : (PIO Offset: 0x0044) Interrupt Disable Register -------- */
+#define PIO_IDR_P0 (0x1u << 0) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P1 (0x1u << 1) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P2 (0x1u << 2) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P3 (0x1u << 3) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P4 (0x1u << 4) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P5 (0x1u << 5) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P6 (0x1u << 6) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P7 (0x1u << 7) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P8 (0x1u << 8) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P9 (0x1u << 9) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P10 (0x1u << 10) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P11 (0x1u << 11) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P12 (0x1u << 12) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P13 (0x1u << 13) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P14 (0x1u << 14) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P15 (0x1u << 15) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P16 (0x1u << 16) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P17 (0x1u << 17) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P18 (0x1u << 18) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P19 (0x1u << 19) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P20 (0x1u << 20) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P21 (0x1u << 21) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P22 (0x1u << 22) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P23 (0x1u << 23) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P24 (0x1u << 24) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P25 (0x1u << 25) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P26 (0x1u << 26) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P27 (0x1u << 27) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P28 (0x1u << 28) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P29 (0x1u << 29) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P30 (0x1u << 30) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+#define PIO_IDR_P31 (0x1u << 31) /**< \brief (PIO_IDR) Input Change Interrupt Disable */
+/* -------- PIO_IMR : (PIO Offset: 0x0048) Interrupt Mask Register -------- */
+#define PIO_IMR_P0 (0x1u << 0) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P1 (0x1u << 1) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P2 (0x1u << 2) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P3 (0x1u << 3) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P4 (0x1u << 4) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P5 (0x1u << 5) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P6 (0x1u << 6) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P7 (0x1u << 7) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P8 (0x1u << 8) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P9 (0x1u << 9) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P10 (0x1u << 10) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P11 (0x1u << 11) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P12 (0x1u << 12) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P13 (0x1u << 13) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P14 (0x1u << 14) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P15 (0x1u << 15) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P16 (0x1u << 16) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P17 (0x1u << 17) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P18 (0x1u << 18) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P19 (0x1u << 19) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P20 (0x1u << 20) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P21 (0x1u << 21) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P22 (0x1u << 22) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P23 (0x1u << 23) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P24 (0x1u << 24) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P25 (0x1u << 25) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P26 (0x1u << 26) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P27 (0x1u << 27) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P28 (0x1u << 28) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P29 (0x1u << 29) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P30 (0x1u << 30) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+#define PIO_IMR_P31 (0x1u << 31) /**< \brief (PIO_IMR) Input Change Interrupt Mask */
+/* -------- PIO_ISR : (PIO Offset: 0x004C) Interrupt Status Register -------- */
+#define PIO_ISR_P0 (0x1u << 0) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P1 (0x1u << 1) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P2 (0x1u << 2) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P3 (0x1u << 3) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P4 (0x1u << 4) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P5 (0x1u << 5) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P6 (0x1u << 6) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P7 (0x1u << 7) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P8 (0x1u << 8) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P9 (0x1u << 9) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P10 (0x1u << 10) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P11 (0x1u << 11) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P12 (0x1u << 12) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P13 (0x1u << 13) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P14 (0x1u << 14) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P15 (0x1u << 15) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P16 (0x1u << 16) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P17 (0x1u << 17) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P18 (0x1u << 18) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P19 (0x1u << 19) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P20 (0x1u << 20) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P21 (0x1u << 21) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P22 (0x1u << 22) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P23 (0x1u << 23) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P24 (0x1u << 24) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P25 (0x1u << 25) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P26 (0x1u << 26) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P27 (0x1u << 27) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P28 (0x1u << 28) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P29 (0x1u << 29) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P30 (0x1u << 30) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+#define PIO_ISR_P31 (0x1u << 31) /**< \brief (PIO_ISR) Input Change Interrupt Status */
+/* -------- PIO_MDER : (PIO Offset: 0x0050) Multi-driver Enable Register -------- */
+#define PIO_MDER_P0 (0x1u << 0) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P1 (0x1u << 1) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P2 (0x1u << 2) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P3 (0x1u << 3) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P4 (0x1u << 4) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P5 (0x1u << 5) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P6 (0x1u << 6) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P7 (0x1u << 7) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P8 (0x1u << 8) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P9 (0x1u << 9) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P10 (0x1u << 10) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P11 (0x1u << 11) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P12 (0x1u << 12) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P13 (0x1u << 13) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P14 (0x1u << 14) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P15 (0x1u << 15) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P16 (0x1u << 16) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P17 (0x1u << 17) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P18 (0x1u << 18) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P19 (0x1u << 19) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P20 (0x1u << 20) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P21 (0x1u << 21) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P22 (0x1u << 22) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P23 (0x1u << 23) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P24 (0x1u << 24) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P25 (0x1u << 25) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P26 (0x1u << 26) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P27 (0x1u << 27) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P28 (0x1u << 28) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P29 (0x1u << 29) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P30 (0x1u << 30) /**< \brief (PIO_MDER) Multi Drive Enable. */
+#define PIO_MDER_P31 (0x1u << 31) /**< \brief (PIO_MDER) Multi Drive Enable. */
+/* -------- PIO_MDDR : (PIO Offset: 0x0054) Multi-driver Disable Register -------- */
+#define PIO_MDDR_P0 (0x1u << 0) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P1 (0x1u << 1) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P2 (0x1u << 2) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P3 (0x1u << 3) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P4 (0x1u << 4) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P5 (0x1u << 5) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P6 (0x1u << 6) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P7 (0x1u << 7) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P8 (0x1u << 8) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P9 (0x1u << 9) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P10 (0x1u << 10) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P11 (0x1u << 11) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P12 (0x1u << 12) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P13 (0x1u << 13) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P14 (0x1u << 14) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P15 (0x1u << 15) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P16 (0x1u << 16) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P17 (0x1u << 17) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P18 (0x1u << 18) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P19 (0x1u << 19) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P20 (0x1u << 20) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P21 (0x1u << 21) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P22 (0x1u << 22) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P23 (0x1u << 23) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P24 (0x1u << 24) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P25 (0x1u << 25) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P26 (0x1u << 26) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P27 (0x1u << 27) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P28 (0x1u << 28) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P29 (0x1u << 29) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P30 (0x1u << 30) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+#define PIO_MDDR_P31 (0x1u << 31) /**< \brief (PIO_MDDR) Multi Drive Disable. */
+/* -------- PIO_MDSR : (PIO Offset: 0x0058) Multi-driver Status Register -------- */
+#define PIO_MDSR_P0 (0x1u << 0) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P1 (0x1u << 1) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P2 (0x1u << 2) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P3 (0x1u << 3) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P4 (0x1u << 4) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P5 (0x1u << 5) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P6 (0x1u << 6) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P7 (0x1u << 7) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P8 (0x1u << 8) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P9 (0x1u << 9) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P10 (0x1u << 10) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P11 (0x1u << 11) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P12 (0x1u << 12) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P13 (0x1u << 13) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P14 (0x1u << 14) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P15 (0x1u << 15) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P16 (0x1u << 16) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P17 (0x1u << 17) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P18 (0x1u << 18) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P19 (0x1u << 19) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P20 (0x1u << 20) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P21 (0x1u << 21) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P22 (0x1u << 22) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P23 (0x1u << 23) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P24 (0x1u << 24) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P25 (0x1u << 25) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P26 (0x1u << 26) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P27 (0x1u << 27) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P28 (0x1u << 28) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P29 (0x1u << 29) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P30 (0x1u << 30) /**< \brief (PIO_MDSR) Multi Drive Status. */
+#define PIO_MDSR_P31 (0x1u << 31) /**< \brief (PIO_MDSR) Multi Drive Status. */
+/* -------- PIO_PUDR : (PIO Offset: 0x0060) Pull-up Disable Register -------- */
+#define PIO_PUDR_P0 (0x1u << 0) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P1 (0x1u << 1) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P2 (0x1u << 2) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P3 (0x1u << 3) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P4 (0x1u << 4) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P5 (0x1u << 5) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P6 (0x1u << 6) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P7 (0x1u << 7) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P8 (0x1u << 8) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P9 (0x1u << 9) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P10 (0x1u << 10) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P11 (0x1u << 11) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P12 (0x1u << 12) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P13 (0x1u << 13) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P14 (0x1u << 14) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P15 (0x1u << 15) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P16 (0x1u << 16) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P17 (0x1u << 17) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P18 (0x1u << 18) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P19 (0x1u << 19) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P20 (0x1u << 20) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P21 (0x1u << 21) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P22 (0x1u << 22) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P23 (0x1u << 23) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P24 (0x1u << 24) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P25 (0x1u << 25) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P26 (0x1u << 26) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P27 (0x1u << 27) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P28 (0x1u << 28) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P29 (0x1u << 29) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P30 (0x1u << 30) /**< \brief (PIO_PUDR) Pull Up Disable. */
+#define PIO_PUDR_P31 (0x1u << 31) /**< \brief (PIO_PUDR) Pull Up Disable. */
+/* -------- PIO_PUER : (PIO Offset: 0x0064) Pull-up Enable Register -------- */
+#define PIO_PUER_P0 (0x1u << 0) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P1 (0x1u << 1) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P2 (0x1u << 2) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P3 (0x1u << 3) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P4 (0x1u << 4) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P5 (0x1u << 5) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P6 (0x1u << 6) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P7 (0x1u << 7) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P8 (0x1u << 8) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P9 (0x1u << 9) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P10 (0x1u << 10) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P11 (0x1u << 11) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P12 (0x1u << 12) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P13 (0x1u << 13) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P14 (0x1u << 14) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P15 (0x1u << 15) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P16 (0x1u << 16) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P17 (0x1u << 17) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P18 (0x1u << 18) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P19 (0x1u << 19) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P20 (0x1u << 20) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P21 (0x1u << 21) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P22 (0x1u << 22) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P23 (0x1u << 23) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P24 (0x1u << 24) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P25 (0x1u << 25) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P26 (0x1u << 26) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P27 (0x1u << 27) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P28 (0x1u << 28) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P29 (0x1u << 29) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P30 (0x1u << 30) /**< \brief (PIO_PUER) Pull Up Enable. */
+#define PIO_PUER_P31 (0x1u << 31) /**< \brief (PIO_PUER) Pull Up Enable. */
+/* -------- PIO_PUSR : (PIO Offset: 0x0068) Pad Pull-up Status Register -------- */
+#define PIO_PUSR_P0 (0x1u << 0) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P1 (0x1u << 1) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P2 (0x1u << 2) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P3 (0x1u << 3) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P4 (0x1u << 4) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P5 (0x1u << 5) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P6 (0x1u << 6) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P7 (0x1u << 7) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P8 (0x1u << 8) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P9 (0x1u << 9) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P10 (0x1u << 10) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P11 (0x1u << 11) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P12 (0x1u << 12) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P13 (0x1u << 13) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P14 (0x1u << 14) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P15 (0x1u << 15) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P16 (0x1u << 16) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P17 (0x1u << 17) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P18 (0x1u << 18) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P19 (0x1u << 19) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P20 (0x1u << 20) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P21 (0x1u << 21) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P22 (0x1u << 22) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P23 (0x1u << 23) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P24 (0x1u << 24) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P25 (0x1u << 25) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P26 (0x1u << 26) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P27 (0x1u << 27) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P28 (0x1u << 28) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P29 (0x1u << 29) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P30 (0x1u << 30) /**< \brief (PIO_PUSR) Pull Up Status. */
+#define PIO_PUSR_P31 (0x1u << 31) /**< \brief (PIO_PUSR) Pull Up Status. */
+/* -------- PIO_ABCDSR[2] : (PIO Offset: 0x0070) Peripheral Select Register -------- */
+#define PIO_ABCDSR_P0 (0x1u << 0) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P1 (0x1u << 1) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P2 (0x1u << 2) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P3 (0x1u << 3) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P4 (0x1u << 4) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P5 (0x1u << 5) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P6 (0x1u << 6) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P7 (0x1u << 7) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P8 (0x1u << 8) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P9 (0x1u << 9) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P10 (0x1u << 10) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P11 (0x1u << 11) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P12 (0x1u << 12) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P13 (0x1u << 13) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P14 (0x1u << 14) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P15 (0x1u << 15) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P16 (0x1u << 16) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P17 (0x1u << 17) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P18 (0x1u << 18) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P19 (0x1u << 19) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P20 (0x1u << 20) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P21 (0x1u << 21) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P22 (0x1u << 22) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P23 (0x1u << 23) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P24 (0x1u << 24) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P25 (0x1u << 25) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P26 (0x1u << 26) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P27 (0x1u << 27) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P28 (0x1u << 28) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P29 (0x1u << 29) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P30 (0x1u << 30) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+#define PIO_ABCDSR_P31 (0x1u << 31) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */
+/* -------- PIO_IFSCDR : (PIO Offset: 0x0080) Input Filter Slow Clock Disable Register -------- */
+#define PIO_IFSCDR_P0 (0x1u << 0) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P1 (0x1u << 1) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P2 (0x1u << 2) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P3 (0x1u << 3) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P4 (0x1u << 4) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P5 (0x1u << 5) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P6 (0x1u << 6) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P7 (0x1u << 7) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P8 (0x1u << 8) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P9 (0x1u << 9) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P10 (0x1u << 10) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P11 (0x1u << 11) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P12 (0x1u << 12) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P13 (0x1u << 13) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P14 (0x1u << 14) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P15 (0x1u << 15) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P16 (0x1u << 16) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P17 (0x1u << 17) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P18 (0x1u << 18) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P19 (0x1u << 19) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P20 (0x1u << 20) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P21 (0x1u << 21) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P22 (0x1u << 22) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P23 (0x1u << 23) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P24 (0x1u << 24) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P25 (0x1u << 25) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P26 (0x1u << 26) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P27 (0x1u << 27) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P28 (0x1u << 28) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P29 (0x1u << 29) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P30 (0x1u << 30) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+#define PIO_IFSCDR_P31 (0x1u << 31) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */
+/* -------- PIO_IFSCER : (PIO Offset: 0x0084) Input Filter Slow Clock Enable Register -------- */
+#define PIO_IFSCER_P0 (0x1u << 0) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P1 (0x1u << 1) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P2 (0x1u << 2) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P3 (0x1u << 3) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P4 (0x1u << 4) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P5 (0x1u << 5) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P6 (0x1u << 6) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P7 (0x1u << 7) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P8 (0x1u << 8) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P9 (0x1u << 9) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P10 (0x1u << 10) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P11 (0x1u << 11) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P12 (0x1u << 12) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P13 (0x1u << 13) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P14 (0x1u << 14) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P15 (0x1u << 15) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P16 (0x1u << 16) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P17 (0x1u << 17) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P18 (0x1u << 18) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P19 (0x1u << 19) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P20 (0x1u << 20) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P21 (0x1u << 21) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P22 (0x1u << 22) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P23 (0x1u << 23) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P24 (0x1u << 24) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P25 (0x1u << 25) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P26 (0x1u << 26) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P27 (0x1u << 27) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P28 (0x1u << 28) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P29 (0x1u << 29) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P30 (0x1u << 30) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+#define PIO_IFSCER_P31 (0x1u << 31) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */
+/* -------- PIO_IFSCSR : (PIO Offset: 0x0088) Input Filter Slow Clock Status Register -------- */
+#define PIO_IFSCSR_P0 (0x1u << 0) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P1 (0x1u << 1) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P2 (0x1u << 2) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P3 (0x1u << 3) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P4 (0x1u << 4) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P5 (0x1u << 5) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P6 (0x1u << 6) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P7 (0x1u << 7) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P8 (0x1u << 8) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P9 (0x1u << 9) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P10 (0x1u << 10) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P11 (0x1u << 11) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P12 (0x1u << 12) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P13 (0x1u << 13) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P14 (0x1u << 14) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P15 (0x1u << 15) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P16 (0x1u << 16) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P17 (0x1u << 17) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P18 (0x1u << 18) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P19 (0x1u << 19) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P20 (0x1u << 20) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P21 (0x1u << 21) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P22 (0x1u << 22) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P23 (0x1u << 23) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P24 (0x1u << 24) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P25 (0x1u << 25) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P26 (0x1u << 26) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P27 (0x1u << 27) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P28 (0x1u << 28) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P29 (0x1u << 29) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P30 (0x1u << 30) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+#define PIO_IFSCSR_P31 (0x1u << 31) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */
+/* -------- PIO_SCDR : (PIO Offset: 0x008C) Slow Clock Divider Debouncing Register -------- */
+#define PIO_SCDR_DIV0 (0x1u << 0) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV1 (0x1u << 1) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV2 (0x1u << 2) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV3 (0x1u << 3) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV4 (0x1u << 4) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV5 (0x1u << 5) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV6 (0x1u << 6) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV7 (0x1u << 7) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV8 (0x1u << 8) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV9 (0x1u << 9) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV10 (0x1u << 10) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV11 (0x1u << 11) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV12 (0x1u << 12) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+#define PIO_SCDR_DIV13 (0x1u << 13) /**< \brief (PIO_SCDR) Slow Clock Divider Selection for Debouncing */
+/* -------- PIO_PPDDR : (PIO Offset: 0x0090) Pad Pull-down Disable Register -------- */
+#define PIO_PPDDR_P0 (0x1u << 0) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P1 (0x1u << 1) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P2 (0x1u << 2) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P3 (0x1u << 3) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P4 (0x1u << 4) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P5 (0x1u << 5) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P6 (0x1u << 6) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P7 (0x1u << 7) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P8 (0x1u << 8) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P9 (0x1u << 9) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P10 (0x1u << 10) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P11 (0x1u << 11) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P12 (0x1u << 12) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P13 (0x1u << 13) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P14 (0x1u << 14) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P15 (0x1u << 15) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P16 (0x1u << 16) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P17 (0x1u << 17) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P18 (0x1u << 18) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P19 (0x1u << 19) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P20 (0x1u << 20) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P21 (0x1u << 21) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P22 (0x1u << 22) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P23 (0x1u << 23) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P24 (0x1u << 24) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P25 (0x1u << 25) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P26 (0x1u << 26) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P27 (0x1u << 27) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P28 (0x1u << 28) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P29 (0x1u << 29) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P30 (0x1u << 30) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+#define PIO_PPDDR_P31 (0x1u << 31) /**< \brief (PIO_PPDDR) Pull Down Disable. */
+/* -------- PIO_PPDER : (PIO Offset: 0x0094) Pad Pull-down Enable Register -------- */
+#define PIO_PPDER_P0 (0x1u << 0) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P1 (0x1u << 1) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P2 (0x1u << 2) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P3 (0x1u << 3) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P4 (0x1u << 4) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P5 (0x1u << 5) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P6 (0x1u << 6) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P7 (0x1u << 7) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P8 (0x1u << 8) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P9 (0x1u << 9) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P10 (0x1u << 10) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P11 (0x1u << 11) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P12 (0x1u << 12) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P13 (0x1u << 13) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P14 (0x1u << 14) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P15 (0x1u << 15) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P16 (0x1u << 16) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P17 (0x1u << 17) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P18 (0x1u << 18) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P19 (0x1u << 19) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P20 (0x1u << 20) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P21 (0x1u << 21) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P22 (0x1u << 22) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P23 (0x1u << 23) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P24 (0x1u << 24) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P25 (0x1u << 25) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P26 (0x1u << 26) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P27 (0x1u << 27) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P28 (0x1u << 28) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P29 (0x1u << 29) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P30 (0x1u << 30) /**< \brief (PIO_PPDER) Pull Down Enable. */
+#define PIO_PPDER_P31 (0x1u << 31) /**< \brief (PIO_PPDER) Pull Down Enable. */
+/* -------- PIO_PPDSR : (PIO Offset: 0x0098) Pad Pull-down Status Register -------- */
+#define PIO_PPDSR_P0 (0x1u << 0) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P1 (0x1u << 1) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P2 (0x1u << 2) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P3 (0x1u << 3) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P4 (0x1u << 4) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P5 (0x1u << 5) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P6 (0x1u << 6) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P7 (0x1u << 7) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P8 (0x1u << 8) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P9 (0x1u << 9) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P10 (0x1u << 10) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P11 (0x1u << 11) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P12 (0x1u << 12) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P13 (0x1u << 13) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P14 (0x1u << 14) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P15 (0x1u << 15) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P16 (0x1u << 16) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P17 (0x1u << 17) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P18 (0x1u << 18) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P19 (0x1u << 19) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P20 (0x1u << 20) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P21 (0x1u << 21) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P22 (0x1u << 22) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P23 (0x1u << 23) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P24 (0x1u << 24) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P25 (0x1u << 25) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P26 (0x1u << 26) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P27 (0x1u << 27) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P28 (0x1u << 28) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P29 (0x1u << 29) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P30 (0x1u << 30) /**< \brief (PIO_PPDSR) Pull Down Status. */
+#define PIO_PPDSR_P31 (0x1u << 31) /**< \brief (PIO_PPDSR) Pull Down Status. */
+/* -------- PIO_OWER : (PIO Offset: 0x00A0) Output Write Enable -------- */
+#define PIO_OWER_P0 (0x1u << 0) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P1 (0x1u << 1) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P2 (0x1u << 2) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P3 (0x1u << 3) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P4 (0x1u << 4) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P5 (0x1u << 5) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P6 (0x1u << 6) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P7 (0x1u << 7) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P8 (0x1u << 8) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P9 (0x1u << 9) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P10 (0x1u << 10) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P11 (0x1u << 11) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P12 (0x1u << 12) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P13 (0x1u << 13) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P14 (0x1u << 14) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P15 (0x1u << 15) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P16 (0x1u << 16) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P17 (0x1u << 17) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P18 (0x1u << 18) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P19 (0x1u << 19) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P20 (0x1u << 20) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P21 (0x1u << 21) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P22 (0x1u << 22) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P23 (0x1u << 23) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P24 (0x1u << 24) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P25 (0x1u << 25) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P26 (0x1u << 26) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P27 (0x1u << 27) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P28 (0x1u << 28) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P29 (0x1u << 29) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P30 (0x1u << 30) /**< \brief (PIO_OWER) Output Write Enable. */
+#define PIO_OWER_P31 (0x1u << 31) /**< \brief (PIO_OWER) Output Write Enable. */
+/* -------- PIO_OWDR : (PIO Offset: 0x00A4) Output Write Disable -------- */
+#define PIO_OWDR_P0 (0x1u << 0) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P1 (0x1u << 1) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P2 (0x1u << 2) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P3 (0x1u << 3) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P4 (0x1u << 4) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P5 (0x1u << 5) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P6 (0x1u << 6) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P7 (0x1u << 7) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P8 (0x1u << 8) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P9 (0x1u << 9) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P10 (0x1u << 10) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P11 (0x1u << 11) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P12 (0x1u << 12) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P13 (0x1u << 13) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P14 (0x1u << 14) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P15 (0x1u << 15) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P16 (0x1u << 16) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P17 (0x1u << 17) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P18 (0x1u << 18) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P19 (0x1u << 19) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P20 (0x1u << 20) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P21 (0x1u << 21) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P22 (0x1u << 22) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P23 (0x1u << 23) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P24 (0x1u << 24) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P25 (0x1u << 25) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P26 (0x1u << 26) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P27 (0x1u << 27) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P28 (0x1u << 28) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P29 (0x1u << 29) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P30 (0x1u << 30) /**< \brief (PIO_OWDR) Output Write Disable. */
+#define PIO_OWDR_P31 (0x1u << 31) /**< \brief (PIO_OWDR) Output Write Disable. */
+/* -------- PIO_OWSR : (PIO Offset: 0x00A8) Output Write Status Register -------- */
+#define PIO_OWSR_P0 (0x1u << 0) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P1 (0x1u << 1) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P2 (0x1u << 2) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P3 (0x1u << 3) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P4 (0x1u << 4) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P5 (0x1u << 5) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P6 (0x1u << 6) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P7 (0x1u << 7) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P8 (0x1u << 8) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P9 (0x1u << 9) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P10 (0x1u << 10) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P11 (0x1u << 11) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P12 (0x1u << 12) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P13 (0x1u << 13) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P14 (0x1u << 14) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P15 (0x1u << 15) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P16 (0x1u << 16) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P17 (0x1u << 17) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P18 (0x1u << 18) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P19 (0x1u << 19) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P20 (0x1u << 20) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P21 (0x1u << 21) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P22 (0x1u << 22) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P23 (0x1u << 23) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P24 (0x1u << 24) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P25 (0x1u << 25) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P26 (0x1u << 26) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P27 (0x1u << 27) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P28 (0x1u << 28) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P29 (0x1u << 29) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P30 (0x1u << 30) /**< \brief (PIO_OWSR) Output Write Status. */
+#define PIO_OWSR_P31 (0x1u << 31) /**< \brief (PIO_OWSR) Output Write Status. */
+/* -------- PIO_AIMER : (PIO Offset: 0x00B0) Additional Interrupt Modes Enable Register -------- */
+#define PIO_AIMER_P0 (0x1u << 0) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P1 (0x1u << 1) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P2 (0x1u << 2) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P3 (0x1u << 3) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P4 (0x1u << 4) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P5 (0x1u << 5) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P6 (0x1u << 6) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P7 (0x1u << 7) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P8 (0x1u << 8) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P9 (0x1u << 9) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P10 (0x1u << 10) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P11 (0x1u << 11) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P12 (0x1u << 12) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P13 (0x1u << 13) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P14 (0x1u << 14) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P15 (0x1u << 15) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P16 (0x1u << 16) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P17 (0x1u << 17) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P18 (0x1u << 18) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P19 (0x1u << 19) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P20 (0x1u << 20) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P21 (0x1u << 21) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P22 (0x1u << 22) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P23 (0x1u << 23) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P24 (0x1u << 24) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P25 (0x1u << 25) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P26 (0x1u << 26) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P27 (0x1u << 27) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P28 (0x1u << 28) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P29 (0x1u << 29) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P30 (0x1u << 30) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+#define PIO_AIMER_P31 (0x1u << 31) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */
+/* -------- PIO_AIMDR : (PIO Offset: 0x00B4) Additional Interrupt Modes Disables Register -------- */
+#define PIO_AIMDR_P0 (0x1u << 0) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P1 (0x1u << 1) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P2 (0x1u << 2) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P3 (0x1u << 3) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P4 (0x1u << 4) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P5 (0x1u << 5) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P6 (0x1u << 6) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P7 (0x1u << 7) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P8 (0x1u << 8) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P9 (0x1u << 9) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P10 (0x1u << 10) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P11 (0x1u << 11) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P12 (0x1u << 12) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P13 (0x1u << 13) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P14 (0x1u << 14) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P15 (0x1u << 15) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P16 (0x1u << 16) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P17 (0x1u << 17) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P18 (0x1u << 18) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P19 (0x1u << 19) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P20 (0x1u << 20) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P21 (0x1u << 21) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P22 (0x1u << 22) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P23 (0x1u << 23) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P24 (0x1u << 24) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P25 (0x1u << 25) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P26 (0x1u << 26) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P27 (0x1u << 27) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P28 (0x1u << 28) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P29 (0x1u << 29) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P30 (0x1u << 30) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+#define PIO_AIMDR_P31 (0x1u << 31) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */
+/* -------- PIO_AIMMR : (PIO Offset: 0x00B8) Additional Interrupt Modes Mask Register -------- */
+#define PIO_AIMMR_P0 (0x1u << 0) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P1 (0x1u << 1) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P2 (0x1u << 2) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P3 (0x1u << 3) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P4 (0x1u << 4) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P5 (0x1u << 5) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P6 (0x1u << 6) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P7 (0x1u << 7) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P8 (0x1u << 8) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P9 (0x1u << 9) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P10 (0x1u << 10) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P11 (0x1u << 11) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P12 (0x1u << 12) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P13 (0x1u << 13) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P14 (0x1u << 14) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P15 (0x1u << 15) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P16 (0x1u << 16) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P17 (0x1u << 17) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P18 (0x1u << 18) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P19 (0x1u << 19) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P20 (0x1u << 20) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P21 (0x1u << 21) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P22 (0x1u << 22) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P23 (0x1u << 23) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P24 (0x1u << 24) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P25 (0x1u << 25) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P26 (0x1u << 26) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P27 (0x1u << 27) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P28 (0x1u << 28) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P29 (0x1u << 29) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P30 (0x1u << 30) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+#define PIO_AIMMR_P31 (0x1u << 31) /**< \brief (PIO_AIMMR) Peripheral CD Status. */
+/* -------- PIO_ESR : (PIO Offset: 0x00C0) Edge Select Register -------- */
+#define PIO_ESR_P0 (0x1u << 0) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P1 (0x1u << 1) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P2 (0x1u << 2) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P3 (0x1u << 3) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P4 (0x1u << 4) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P5 (0x1u << 5) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P6 (0x1u << 6) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P7 (0x1u << 7) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P8 (0x1u << 8) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P9 (0x1u << 9) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P10 (0x1u << 10) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P11 (0x1u << 11) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P12 (0x1u << 12) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P13 (0x1u << 13) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P14 (0x1u << 14) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P15 (0x1u << 15) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P16 (0x1u << 16) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P17 (0x1u << 17) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P18 (0x1u << 18) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P19 (0x1u << 19) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P20 (0x1u << 20) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P21 (0x1u << 21) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P22 (0x1u << 22) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P23 (0x1u << 23) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P24 (0x1u << 24) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P25 (0x1u << 25) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P26 (0x1u << 26) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P27 (0x1u << 27) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P28 (0x1u << 28) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P29 (0x1u << 29) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P30 (0x1u << 30) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+#define PIO_ESR_P31 (0x1u << 31) /**< \brief (PIO_ESR) Edge Interrupt Selection. */
+/* -------- PIO_LSR : (PIO Offset: 0x00C4) Level Select Register -------- */
+#define PIO_LSR_P0 (0x1u << 0) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P1 (0x1u << 1) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P2 (0x1u << 2) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P3 (0x1u << 3) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P4 (0x1u << 4) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P5 (0x1u << 5) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P6 (0x1u << 6) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P7 (0x1u << 7) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P8 (0x1u << 8) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P9 (0x1u << 9) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P10 (0x1u << 10) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P11 (0x1u << 11) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P12 (0x1u << 12) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P13 (0x1u << 13) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P14 (0x1u << 14) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P15 (0x1u << 15) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P16 (0x1u << 16) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P17 (0x1u << 17) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P18 (0x1u << 18) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P19 (0x1u << 19) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P20 (0x1u << 20) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P21 (0x1u << 21) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P22 (0x1u << 22) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P23 (0x1u << 23) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P24 (0x1u << 24) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P25 (0x1u << 25) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P26 (0x1u << 26) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P27 (0x1u << 27) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P28 (0x1u << 28) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P29 (0x1u << 29) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P30 (0x1u << 30) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+#define PIO_LSR_P31 (0x1u << 31) /**< \brief (PIO_LSR) Level Interrupt Selection. */
+/* -------- PIO_ELSR : (PIO Offset: 0x00C8) Edge/Level Status Register -------- */
+#define PIO_ELSR_P0 (0x1u << 0) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P1 (0x1u << 1) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P2 (0x1u << 2) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P3 (0x1u << 3) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P4 (0x1u << 4) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P5 (0x1u << 5) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P6 (0x1u << 6) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P7 (0x1u << 7) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P8 (0x1u << 8) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P9 (0x1u << 9) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P10 (0x1u << 10) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P11 (0x1u << 11) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P12 (0x1u << 12) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P13 (0x1u << 13) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P14 (0x1u << 14) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P15 (0x1u << 15) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P16 (0x1u << 16) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P17 (0x1u << 17) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P18 (0x1u << 18) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P19 (0x1u << 19) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P20 (0x1u << 20) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P21 (0x1u << 21) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P22 (0x1u << 22) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P23 (0x1u << 23) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P24 (0x1u << 24) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P25 (0x1u << 25) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P26 (0x1u << 26) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P27 (0x1u << 27) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P28 (0x1u << 28) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P29 (0x1u << 29) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P30 (0x1u << 30) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+#define PIO_ELSR_P31 (0x1u << 31) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */
+/* -------- PIO_FELLSR : (PIO Offset: 0x00D0) Falling Edge/Low Level Select Register -------- */
+#define PIO_FELLSR_P0 (0x1u << 0) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P1 (0x1u << 1) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P2 (0x1u << 2) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P3 (0x1u << 3) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P4 (0x1u << 4) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P5 (0x1u << 5) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P6 (0x1u << 6) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P7 (0x1u << 7) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P8 (0x1u << 8) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P9 (0x1u << 9) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P10 (0x1u << 10) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P11 (0x1u << 11) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P12 (0x1u << 12) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P13 (0x1u << 13) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P14 (0x1u << 14) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P15 (0x1u << 15) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P16 (0x1u << 16) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P17 (0x1u << 17) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P18 (0x1u << 18) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P19 (0x1u << 19) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P20 (0x1u << 20) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P21 (0x1u << 21) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P22 (0x1u << 22) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P23 (0x1u << 23) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P24 (0x1u << 24) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P25 (0x1u << 25) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P26 (0x1u << 26) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P27 (0x1u << 27) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P28 (0x1u << 28) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P29 (0x1u << 29) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P30 (0x1u << 30) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+#define PIO_FELLSR_P31 (0x1u << 31) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */
+/* -------- PIO_REHLSR : (PIO Offset: 0x00D4) Rising Edge/ High Level Select Register -------- */
+#define PIO_REHLSR_P0 (0x1u << 0) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P1 (0x1u << 1) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P2 (0x1u << 2) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P3 (0x1u << 3) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P4 (0x1u << 4) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P5 (0x1u << 5) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P6 (0x1u << 6) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P7 (0x1u << 7) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P8 (0x1u << 8) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P9 (0x1u << 9) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P10 (0x1u << 10) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P11 (0x1u << 11) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P12 (0x1u << 12) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P13 (0x1u << 13) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P14 (0x1u << 14) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P15 (0x1u << 15) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P16 (0x1u << 16) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P17 (0x1u << 17) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P18 (0x1u << 18) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P19 (0x1u << 19) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P20 (0x1u << 20) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P21 (0x1u << 21) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P22 (0x1u << 22) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P23 (0x1u << 23) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P24 (0x1u << 24) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P25 (0x1u << 25) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P26 (0x1u << 26) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P27 (0x1u << 27) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P28 (0x1u << 28) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P29 (0x1u << 29) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P30 (0x1u << 30) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+#define PIO_REHLSR_P31 (0x1u << 31) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */
+/* -------- PIO_FRLHSR : (PIO Offset: 0x00D8) Fall/Rise - Low/High Status Register -------- */
+#define PIO_FRLHSR_P0 (0x1u << 0) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P1 (0x1u << 1) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P2 (0x1u << 2) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P3 (0x1u << 3) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P4 (0x1u << 4) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P5 (0x1u << 5) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P6 (0x1u << 6) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P7 (0x1u << 7) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P8 (0x1u << 8) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P9 (0x1u << 9) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P10 (0x1u << 10) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P11 (0x1u << 11) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P12 (0x1u << 12) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P13 (0x1u << 13) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P14 (0x1u << 14) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P15 (0x1u << 15) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P16 (0x1u << 16) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P17 (0x1u << 17) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P18 (0x1u << 18) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P19 (0x1u << 19) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P20 (0x1u << 20) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P21 (0x1u << 21) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P22 (0x1u << 22) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P23 (0x1u << 23) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P24 (0x1u << 24) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P25 (0x1u << 25) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P26 (0x1u << 26) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P27 (0x1u << 27) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P28 (0x1u << 28) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P29 (0x1u << 29) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P30 (0x1u << 30) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+#define PIO_FRLHSR_P31 (0x1u << 31) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */
+/* -------- PIO_LOCKSR : (PIO Offset: 0x00E0) Lock Status -------- */
+#define PIO_LOCKSR_P0 (0x1u << 0) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P1 (0x1u << 1) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P2 (0x1u << 2) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P3 (0x1u << 3) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P4 (0x1u << 4) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P5 (0x1u << 5) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P6 (0x1u << 6) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P7 (0x1u << 7) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P8 (0x1u << 8) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P9 (0x1u << 9) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P10 (0x1u << 10) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P11 (0x1u << 11) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P12 (0x1u << 12) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P13 (0x1u << 13) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P14 (0x1u << 14) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P15 (0x1u << 15) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P16 (0x1u << 16) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P17 (0x1u << 17) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P18 (0x1u << 18) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P19 (0x1u << 19) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P20 (0x1u << 20) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P21 (0x1u << 21) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P22 (0x1u << 22) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P23 (0x1u << 23) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P24 (0x1u << 24) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P25 (0x1u << 25) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P26 (0x1u << 26) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P27 (0x1u << 27) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P28 (0x1u << 28) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P29 (0x1u << 29) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P30 (0x1u << 30) /**< \brief (PIO_LOCKSR) Lock Status. */
+#define PIO_LOCKSR_P31 (0x1u << 31) /**< \brief (PIO_LOCKSR) Lock Status. */
+/* -------- PIO_WPMR : (PIO Offset: 0x00E4) Write Protect Mode Register -------- */
+#define PIO_WPMR_WPEN (0x1u << 0) /**< \brief (PIO_WPMR) Write Protect Enable */
+#define PIO_WPMR_WPKEY_Pos 8
+#define PIO_WPMR_WPKEY_Msk (0xffffffu << PIO_WPMR_WPKEY_Pos) /**< \brief (PIO_WPMR) Write Protect KEY */
+#define PIO_WPMR_WPKEY(value) ((PIO_WPMR_WPKEY_Msk & ((value) << PIO_WPMR_WPKEY_Pos)))
+/* -------- PIO_WPSR : (PIO Offset: 0x00E8) Write Protect Status Register -------- */
+#define PIO_WPSR_WPVS (0x1u << 0) /**< \brief (PIO_WPSR) Write Protect Violation Status */
+#define PIO_WPSR_WPVSRC_Pos 8
+#define PIO_WPSR_WPVSRC_Msk (0xffffu << PIO_WPSR_WPVSRC_Pos) /**< \brief (PIO_WPSR) Write Protect Violation Source */
+/* -------- PIO_SCHMITT : (PIO Offset: 0x0100) Schmitt Trigger Register -------- */
+#define PIO_SCHMITT_SCHMITT0 (0x1u << 0) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT1 (0x1u << 1) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT2 (0x1u << 2) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT3 (0x1u << 3) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT4 (0x1u << 4) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT5 (0x1u << 5) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT6 (0x1u << 6) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT7 (0x1u << 7) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT8 (0x1u << 8) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT9 (0x1u << 9) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT10 (0x1u << 10) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT11 (0x1u << 11) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT12 (0x1u << 12) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT13 (0x1u << 13) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT14 (0x1u << 14) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT15 (0x1u << 15) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT16 (0x1u << 16) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT17 (0x1u << 17) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT18 (0x1u << 18) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT19 (0x1u << 19) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT20 (0x1u << 20) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT21 (0x1u << 21) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT22 (0x1u << 22) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT23 (0x1u << 23) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT24 (0x1u << 24) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT25 (0x1u << 25) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT26 (0x1u << 26) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT27 (0x1u << 27) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT28 (0x1u << 28) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT29 (0x1u << 29) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT30 (0x1u << 30) /**< \brief (PIO_SCHMITT) */
+#define PIO_SCHMITT_SCHMITT31 (0x1u << 31) /**< \brief (PIO_SCHMITT) */
+/* -------- PIO_PCMR : (PIO Offset: 0x150) Parallel Capture Mode Register -------- */
+#define PIO_PCMR_PCEN (0x1u << 0) /**< \brief (PIO_PCMR) Parallel Capture Mode Enable */
+#define PIO_PCMR_DSIZE_Pos 4
+#define PIO_PCMR_DSIZE_Msk (0x3u << PIO_PCMR_DSIZE_Pos) /**< \brief (PIO_PCMR) Parallel Capture Mode Data Size */
+#define PIO_PCMR_DSIZE(value) ((PIO_PCMR_DSIZE_Msk & ((value) << PIO_PCMR_DSIZE_Pos)))
+#define PIO_PCMR_ALWYS (0x1u << 9) /**< \brief (PIO_PCMR) Parallel Capture Mode Always Sampling */
+#define PIO_PCMR_HALFS (0x1u << 10) /**< \brief (PIO_PCMR) Parallel Capture Mode Half Sampling */
+#define PIO_PCMR_FRSTS (0x1u << 11) /**< \brief (PIO_PCMR) Parallel Capture Mode First Sample */
+/* -------- PIO_PCIER : (PIO Offset: 0x154) Parallel Capture Interrupt Enable Register -------- */
+#define PIO_PCIER_DRDY (0x1u << 0) /**< \brief (PIO_PCIER) Parallel Capture Mode Data Ready Interrupt Enable */
+#define PIO_PCIER_OVRE (0x1u << 1) /**< \brief (PIO_PCIER) Parallel Capture Mode Overrun Error Interrupt Enable */
+#define PIO_PCIER_ENDRX (0x1u << 2) /**< \brief (PIO_PCIER) End of Reception Transfer Interrupt Enable */
+#define PIO_PCIER_RXBUFF (0x1u << 3) /**< \brief (PIO_PCIER) Reception Buffer Full Interrupt Enable */
+/* -------- PIO_PCIDR : (PIO Offset: 0x158) Parallel Capture Interrupt Disable Register -------- */
+#define PIO_PCIDR_DRDY (0x1u << 0) /**< \brief (PIO_PCIDR) Parallel Capture Mode Data Ready Interrupt Disable */
+#define PIO_PCIDR_OVRE (0x1u << 1) /**< \brief (PIO_PCIDR) Parallel Capture Mode Overrun Error Interrupt Disable */
+#define PIO_PCIDR_ENDRX (0x1u << 2) /**< \brief (PIO_PCIDR) End of Reception Transfer Interrupt Disable */
+#define PIO_PCIDR_RXBUFF (0x1u << 3) /**< \brief (PIO_PCIDR) Reception Buffer Full Interrupt Disable */
+/* -------- PIO_PCIMR : (PIO Offset: 0x15C) Parallel Capture Interrupt Mask Register -------- */
+#define PIO_PCIMR_DRDY (0x1u << 0) /**< \brief (PIO_PCIMR) Parallel Capture Mode Data Ready Interrupt Mask */
+#define PIO_PCIMR_OVRE (0x1u << 1) /**< \brief (PIO_PCIMR) Parallel Capture Mode Overrun Error Interrupt Mask */
+#define PIO_PCIMR_ENDRX (0x1u << 2) /**< \brief (PIO_PCIMR) End of Reception Transfer Interrupt Mask */
+#define PIO_PCIMR_RXBUFF (0x1u << 3) /**< \brief (PIO_PCIMR) Reception Buffer Full Interrupt Mask */
+/* -------- PIO_PCISR : (PIO Offset: 0x160) Parallel Capture Interrupt Status Register -------- */
+#define PIO_PCISR_DRDY (0x1u << 0) /**< \brief (PIO_PCISR) Parallel Capture Mode Data Ready */
+#define PIO_PCISR_OVRE (0x1u << 1) /**< \brief (PIO_PCISR) Parallel Capture Mode Overrun Error. */
+#define PIO_PCISR_ENDRX (0x1u << 2) /**< \brief (PIO_PCISR) End of Reception Transfer. */
+#define PIO_PCISR_RXBUFF (0x1u << 3) /**< \brief (PIO_PCISR) Reception Buffer Full */
+/* -------- PIO_PCRHR : (PIO Offset: 0x164) Parallel Capture Reception Holding Register -------- */
+#define PIO_PCRHR_RDATA_Pos 0
+#define PIO_PCRHR_RDATA_Msk (0xffffffffu << PIO_PCRHR_RDATA_Pos) /**< \brief (PIO_PCRHR) Parallel Capture Mode Reception Data. */
+/* -------- PIO_RPR : (PIO Offset: 0x168) Receive Pointer Register -------- */
+#define PIO_RPR_RXPTR_Pos 0
+#define PIO_RPR_RXPTR_Msk (0xffffffffu << PIO_RPR_RXPTR_Pos) /**< \brief (PIO_RPR) Receive Pointer Register */
+#define PIO_RPR_RXPTR(value) ((PIO_RPR_RXPTR_Msk & ((value) << PIO_RPR_RXPTR_Pos)))
+/* -------- PIO_RCR : (PIO Offset: 0x16C) Receive Counter Register -------- */
+#define PIO_RCR_RXCTR_Pos 0
+#define PIO_RCR_RXCTR_Msk (0xffffu << PIO_RCR_RXCTR_Pos) /**< \brief (PIO_RCR) Receive Counter Register */
+#define PIO_RCR_RXCTR(value) ((PIO_RCR_RXCTR_Msk & ((value) << PIO_RCR_RXCTR_Pos)))
+/* -------- PIO_TPR : (PIO Offset: 0x170) Transmit Pointer Register -------- */
+#define PIO_TPR_TXPTR_Pos 0
+#define PIO_TPR_TXPTR_Msk (0xffffffffu << PIO_TPR_TXPTR_Pos) /**< \brief (PIO_TPR) Transmit Counter Register */
+#define PIO_TPR_TXPTR(value) ((PIO_TPR_TXPTR_Msk & ((value) << PIO_TPR_TXPTR_Pos)))
+/* -------- PIO_TCR : (PIO Offset: 0x174) Transmit Counter Register -------- */
+#define PIO_TCR_TXCTR_Pos 0
+#define PIO_TCR_TXCTR_Msk (0xffffu << PIO_TCR_TXCTR_Pos) /**< \brief (PIO_TCR) Transmit Counter Register */
+#define PIO_TCR_TXCTR(value) ((PIO_TCR_TXCTR_Msk & ((value) << PIO_TCR_TXCTR_Pos)))
+/* -------- PIO_RNPR : (PIO Offset: 0x178) Receive Next Pointer Register -------- */
+#define PIO_RNPR_RXNPTR_Pos 0
+#define PIO_RNPR_RXNPTR_Msk (0xffffffffu << PIO_RNPR_RXNPTR_Pos) /**< \brief (PIO_RNPR) Receive Next Pointer */
+#define PIO_RNPR_RXNPTR(value) ((PIO_RNPR_RXNPTR_Msk & ((value) << PIO_RNPR_RXNPTR_Pos)))
+/* -------- PIO_RNCR : (PIO Offset: 0x17C) Receive Next Counter Register -------- */
+#define PIO_RNCR_RXNCTR_Pos 0
+#define PIO_RNCR_RXNCTR_Msk (0xffffu << PIO_RNCR_RXNCTR_Pos) /**< \brief (PIO_RNCR) Receive Next Counter */
+#define PIO_RNCR_RXNCTR(value) ((PIO_RNCR_RXNCTR_Msk & ((value) << PIO_RNCR_RXNCTR_Pos)))
+/* -------- PIO_TNPR : (PIO Offset: 0x180) Transmit Next Pointer Register -------- */
+#define PIO_TNPR_TXNPTR_Pos 0
+#define PIO_TNPR_TXNPTR_Msk (0xffffffffu << PIO_TNPR_TXNPTR_Pos) /**< \brief (PIO_TNPR) Transmit Next Pointer */
+#define PIO_TNPR_TXNPTR(value) ((PIO_TNPR_TXNPTR_Msk & ((value) << PIO_TNPR_TXNPTR_Pos)))
+/* -------- PIO_TNCR : (PIO Offset: 0x184) Transmit Next Counter Register -------- */
+#define PIO_TNCR_TXNCTR_Pos 0
+#define PIO_TNCR_TXNCTR_Msk (0xffffu << PIO_TNCR_TXNCTR_Pos) /**< \brief (PIO_TNCR) Transmit Counter Next */
+#define PIO_TNCR_TXNCTR(value) ((PIO_TNCR_TXNCTR_Msk & ((value) << PIO_TNCR_TXNCTR_Pos)))
+/* -------- PIO_PTCR : (PIO Offset: 0x188) Transfer Control Register -------- */
+#define PIO_PTCR_RXTEN (0x1u << 0) /**< \brief (PIO_PTCR) Receiver Transfer Enable */
+#define PIO_PTCR_RXTDIS (0x1u << 1) /**< \brief (PIO_PTCR) Receiver Transfer Disable */
+#define PIO_PTCR_TXTEN (0x1u << 8) /**< \brief (PIO_PTCR) Transmitter Transfer Enable */
+#define PIO_PTCR_TXTDIS (0x1u << 9) /**< \brief (PIO_PTCR) Transmitter Transfer Disable */
+/* -------- PIO_PTSR : (PIO Offset: 0x18C) Transfer Status Register -------- */
+#define PIO_PTSR_RXTEN (0x1u << 0) /**< \brief (PIO_PTSR) Receiver Transfer Enable */
+#define PIO_PTSR_TXTEN (0x1u << 8) /**< \brief (PIO_PTSR) Transmitter Transfer Enable */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Power Management Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_PMC Power Management Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Pmc hardware registers */
+typedef struct {
+ WoReg PMC_SCER; /**< \brief (Pmc Offset: 0x0000) System Clock Enable Register */
+ WoReg PMC_SCDR; /**< \brief (Pmc Offset: 0x0004) System Clock Disable Register */
+ RoReg PMC_SCSR; /**< \brief (Pmc Offset: 0x0008) System Clock Status Register */
+ RwReg Reserved1[1];
+ WoReg PMC_PCER0; /**< \brief (Pmc Offset: 0x0010) Peripheral Clock Enable Register 0 */
+ WoReg PMC_PCDR0; /**< \brief (Pmc Offset: 0x0014) Peripheral Clock Disable Register 0 */
+ RoReg PMC_PCSR0; /**< \brief (Pmc Offset: 0x0018) Peripheral Clock Status Register 0 */
+ RwReg Reserved2[1];
+ RwReg CKGR_MOR; /**< \brief (Pmc Offset: 0x0020) Main Oscillator Register */
+ RoReg CKGR_MCFR; /**< \brief (Pmc Offset: 0x0024) Main Clock Frequency Register */
+ RwReg CKGR_PLLAR; /**< \brief (Pmc Offset: 0x0028) PLLA Register */
+ RwReg CKGR_PLLBR; /**< \brief (Pmc Offset: 0x002C) PLLB Register */
+ RwReg PMC_MCKR; /**< \brief (Pmc Offset: 0x0030) Master Clock Register */
+ RwReg Reserved3[1];
+ RwReg PMC_USB; /**< \brief (Pmc Offset: 0x0038) USB Clock Register */
+ RwReg Reserved4[1];
+ RwReg PMC_PCK[3]; /**< \brief (Pmc Offset: 0x0040) Programmable Clock 0 Register */
+ RwReg Reserved5[5];
+ WoReg PMC_IER; /**< \brief (Pmc Offset: 0x0060) Interrupt Enable Register */
+ WoReg PMC_IDR; /**< \brief (Pmc Offset: 0x0064) Interrupt Disable Register */
+ RoReg PMC_SR; /**< \brief (Pmc Offset: 0x0068) Status Register */
+ RoReg PMC_IMR; /**< \brief (Pmc Offset: 0x006C) Interrupt Mask Register */
+ RwReg PMC_FSMR; /**< \brief (Pmc Offset: 0x0070) Fast Startup Mode Register */
+ RwReg PMC_FSPR; /**< \brief (Pmc Offset: 0x0074) Fast Startup Polarity Register */
+ WoReg PMC_FOCR; /**< \brief (Pmc Offset: 0x0078) Fault Output Clear Register */
+ RwReg Reserved6[26];
+ RwReg PMC_WPMR; /**< \brief (Pmc Offset: 0x00E4) Write Protect Mode Register */
+ RoReg PMC_WPSR; /**< \brief (Pmc Offset: 0x00E8) Write Protect Status Register */
+ RwReg Reserved7[5];
+ WoReg PMC_PCER1; /**< \brief (Pmc Offset: 0x0100) Peripheral Clock Enable Register 1 */
+ WoReg PMC_PCDR1; /**< \brief (Pmc Offset: 0x0104) Peripheral Clock Disable Register 1 */
+ RoReg PMC_PCSR1; /**< \brief (Pmc Offset: 0x0108) Peripheral Clock Status Register 1 */
+ RwReg Reserved8[1];
+ RwReg PMC_OCR; /**< \brief (Pmc Offset: 0x0110) Oscillator Calibration Register */
+} Pmc;
+#endif /* __ASSEMBLY__ */
+/* -------- PMC_SCER : (PMC Offset: 0x0000) System Clock Enable Register -------- */
+#define PMC_SCER_UDP (0x1u << 7) /**< \brief (PMC_SCER) USB Device Port Clock Enable */
+#define PMC_SCER_PCK0 (0x1u << 8) /**< \brief (PMC_SCER) Programmable Clock 0 Output Enable */
+#define PMC_SCER_PCK1 (0x1u << 9) /**< \brief (PMC_SCER) Programmable Clock 1 Output Enable */
+#define PMC_SCER_PCK2 (0x1u << 10) /**< \brief (PMC_SCER) Programmable Clock 2 Output Enable */
+/* -------- PMC_SCDR : (PMC Offset: 0x0004) System Clock Disable Register -------- */
+#define PMC_SCDR_UDP (0x1u << 7) /**< \brief (PMC_SCDR) USB Device Port Clock Disable */
+#define PMC_SCDR_PCK0 (0x1u << 8) /**< \brief (PMC_SCDR) Programmable Clock 0 Output Disable */
+#define PMC_SCDR_PCK1 (0x1u << 9) /**< \brief (PMC_SCDR) Programmable Clock 1 Output Disable */
+#define PMC_SCDR_PCK2 (0x1u << 10) /**< \brief (PMC_SCDR) Programmable Clock 2 Output Disable */
+/* -------- PMC_SCSR : (PMC Offset: 0x0008) System Clock Status Register -------- */
+#define PMC_SCSR_UDP (0x1u << 7) /**< \brief (PMC_SCSR) USB Device Port Clock Status */
+#define PMC_SCSR_PCK0 (0x1u << 8) /**< \brief (PMC_SCSR) Programmable Clock 0 Output Status */
+#define PMC_SCSR_PCK1 (0x1u << 9) /**< \brief (PMC_SCSR) Programmable Clock 1 Output Status */
+#define PMC_SCSR_PCK2 (0x1u << 10) /**< \brief (PMC_SCSR) Programmable Clock 2 Output Status */
+/* -------- PMC_PCER0 : (PMC Offset: 0x0010) Peripheral Clock Enable Register 0 -------- */
+#define PMC_PCER0_PID2 (0x1u << 2) /**< \brief (PMC_PCER0) Peripheral Clock 2 Enable */
+#define PMC_PCER0_PID3 (0x1u << 3) /**< \brief (PMC_PCER0) Peripheral Clock 3 Enable */
+#define PMC_PCER0_PID4 (0x1u << 4) /**< \brief (PMC_PCER0) Peripheral Clock 4 Enable */
+#define PMC_PCER0_PID5 (0x1u << 5) /**< \brief (PMC_PCER0) Peripheral Clock 5 Enable */
+#define PMC_PCER0_PID6 (0x1u << 6) /**< \brief (PMC_PCER0) Peripheral Clock 6 Enable */
+#define PMC_PCER0_PID7 (0x1u << 7) /**< \brief (PMC_PCER0) Peripheral Clock 7 Enable */
+#define PMC_PCER0_PID8 (0x1u << 8) /**< \brief (PMC_PCER0) Peripheral Clock 8 Enable */
+#define PMC_PCER0_PID9 (0x1u << 9) /**< \brief (PMC_PCER0) Peripheral Clock 9 Enable */
+#define PMC_PCER0_PID10 (0x1u << 10) /**< \brief (PMC_PCER0) Peripheral Clock 10 Enable */
+#define PMC_PCER0_PID11 (0x1u << 11) /**< \brief (PMC_PCER0) Peripheral Clock 11 Enable */
+#define PMC_PCER0_PID12 (0x1u << 12) /**< \brief (PMC_PCER0) Peripheral Clock 12 Enable */
+#define PMC_PCER0_PID13 (0x1u << 13) /**< \brief (PMC_PCER0) Peripheral Clock 13 Enable */
+#define PMC_PCER0_PID14 (0x1u << 14) /**< \brief (PMC_PCER0) Peripheral Clock 14 Enable */
+#define PMC_PCER0_PID15 (0x1u << 15) /**< \brief (PMC_PCER0) Peripheral Clock 15 Enable */
+#define PMC_PCER0_PID16 (0x1u << 16) /**< \brief (PMC_PCER0) Peripheral Clock 16 Enable */
+#define PMC_PCER0_PID17 (0x1u << 17) /**< \brief (PMC_PCER0) Peripheral Clock 17 Enable */
+#define PMC_PCER0_PID18 (0x1u << 18) /**< \brief (PMC_PCER0) Peripheral Clock 18 Enable */
+#define PMC_PCER0_PID19 (0x1u << 19) /**< \brief (PMC_PCER0) Peripheral Clock 19 Enable */
+#define PMC_PCER0_PID20 (0x1u << 20) /**< \brief (PMC_PCER0) Peripheral Clock 20 Enable */
+#define PMC_PCER0_PID21 (0x1u << 21) /**< \brief (PMC_PCER0) Peripheral Clock 21 Enable */
+#define PMC_PCER0_PID22 (0x1u << 22) /**< \brief (PMC_PCER0) Peripheral Clock 22 Enable */
+#define PMC_PCER0_PID23 (0x1u << 23) /**< \brief (PMC_PCER0) Peripheral Clock 23 Enable */
+#define PMC_PCER0_PID24 (0x1u << 24) /**< \brief (PMC_PCER0) Peripheral Clock 24 Enable */
+#define PMC_PCER0_PID25 (0x1u << 25) /**< \brief (PMC_PCER0) Peripheral Clock 25 Enable */
+#define PMC_PCER0_PID26 (0x1u << 26) /**< \brief (PMC_PCER0) Peripheral Clock 26 Enable */
+#define PMC_PCER0_PID27 (0x1u << 27) /**< \brief (PMC_PCER0) Peripheral Clock 27 Enable */
+#define PMC_PCER0_PID28 (0x1u << 28) /**< \brief (PMC_PCER0) Peripheral Clock 28 Enable */
+#define PMC_PCER0_PID29 (0x1u << 29) /**< \brief (PMC_PCER0) Peripheral Clock 29 Enable */
+#define PMC_PCER0_PID30 (0x1u << 30) /**< \brief (PMC_PCER0) Peripheral Clock 30 Enable */
+#define PMC_PCER0_PID31 (0x1u << 31) /**< \brief (PMC_PCER0) Peripheral Clock 31 Enable */
+/* -------- PMC_PCDR0 : (PMC Offset: 0x0014) Peripheral Clock Disable Register 0 -------- */
+#define PMC_PCDR0_PID2 (0x1u << 2) /**< \brief (PMC_PCDR0) Peripheral Clock 2 Disable */
+#define PMC_PCDR0_PID3 (0x1u << 3) /**< \brief (PMC_PCDR0) Peripheral Clock 3 Disable */
+#define PMC_PCDR0_PID4 (0x1u << 4) /**< \brief (PMC_PCDR0) Peripheral Clock 4 Disable */
+#define PMC_PCDR0_PID5 (0x1u << 5) /**< \brief (PMC_PCDR0) Peripheral Clock 5 Disable */
+#define PMC_PCDR0_PID6 (0x1u << 6) /**< \brief (PMC_PCDR0) Peripheral Clock 6 Disable */
+#define PMC_PCDR0_PID7 (0x1u << 7) /**< \brief (PMC_PCDR0) Peripheral Clock 7 Disable */
+#define PMC_PCDR0_PID8 (0x1u << 8) /**< \brief (PMC_PCDR0) Peripheral Clock 8 Disable */
+#define PMC_PCDR0_PID9 (0x1u << 9) /**< \brief (PMC_PCDR0) Peripheral Clock 9 Disable */
+#define PMC_PCDR0_PID10 (0x1u << 10) /**< \brief (PMC_PCDR0) Peripheral Clock 10 Disable */
+#define PMC_PCDR0_PID11 (0x1u << 11) /**< \brief (PMC_PCDR0) Peripheral Clock 11 Disable */
+#define PMC_PCDR0_PID12 (0x1u << 12) /**< \brief (PMC_PCDR0) Peripheral Clock 12 Disable */
+#define PMC_PCDR0_PID13 (0x1u << 13) /**< \brief (PMC_PCDR0) Peripheral Clock 13 Disable */
+#define PMC_PCDR0_PID14 (0x1u << 14) /**< \brief (PMC_PCDR0) Peripheral Clock 14 Disable */
+#define PMC_PCDR0_PID15 (0x1u << 15) /**< \brief (PMC_PCDR0) Peripheral Clock 15 Disable */
+#define PMC_PCDR0_PID16 (0x1u << 16) /**< \brief (PMC_PCDR0) Peripheral Clock 16 Disable */
+#define PMC_PCDR0_PID17 (0x1u << 17) /**< \brief (PMC_PCDR0) Peripheral Clock 17 Disable */
+#define PMC_PCDR0_PID18 (0x1u << 18) /**< \brief (PMC_PCDR0) Peripheral Clock 18 Disable */
+#define PMC_PCDR0_PID19 (0x1u << 19) /**< \brief (PMC_PCDR0) Peripheral Clock 19 Disable */
+#define PMC_PCDR0_PID20 (0x1u << 20) /**< \brief (PMC_PCDR0) Peripheral Clock 20 Disable */
+#define PMC_PCDR0_PID21 (0x1u << 21) /**< \brief (PMC_PCDR0) Peripheral Clock 21 Disable */
+#define PMC_PCDR0_PID22 (0x1u << 22) /**< \brief (PMC_PCDR0) Peripheral Clock 22 Disable */
+#define PMC_PCDR0_PID23 (0x1u << 23) /**< \brief (PMC_PCDR0) Peripheral Clock 23 Disable */
+#define PMC_PCDR0_PID24 (0x1u << 24) /**< \brief (PMC_PCDR0) Peripheral Clock 24 Disable */
+#define PMC_PCDR0_PID25 (0x1u << 25) /**< \brief (PMC_PCDR0) Peripheral Clock 25 Disable */
+#define PMC_PCDR0_PID26 (0x1u << 26) /**< \brief (PMC_PCDR0) Peripheral Clock 26 Disable */
+#define PMC_PCDR0_PID27 (0x1u << 27) /**< \brief (PMC_PCDR0) Peripheral Clock 27 Disable */
+#define PMC_PCDR0_PID28 (0x1u << 28) /**< \brief (PMC_PCDR0) Peripheral Clock 28 Disable */
+#define PMC_PCDR0_PID29 (0x1u << 29) /**< \brief (PMC_PCDR0) Peripheral Clock 29 Disable */
+#define PMC_PCDR0_PID30 (0x1u << 30) /**< \brief (PMC_PCDR0) Peripheral Clock 30 Disable */
+#define PMC_PCDR0_PID31 (0x1u << 31) /**< \brief (PMC_PCDR0) Peripheral Clock 31 Disable */
+/* -------- PMC_PCSR0 : (PMC Offset: 0x0018) Peripheral Clock Status Register 0 -------- */
+#define PMC_PCSR0_PID2 (0x1u << 2) /**< \brief (PMC_PCSR0) Peripheral Clock 2 Status */
+#define PMC_PCSR0_PID3 (0x1u << 3) /**< \brief (PMC_PCSR0) Peripheral Clock 3 Status */
+#define PMC_PCSR0_PID4 (0x1u << 4) /**< \brief (PMC_PCSR0) Peripheral Clock 4 Status */
+#define PMC_PCSR0_PID5 (0x1u << 5) /**< \brief (PMC_PCSR0) Peripheral Clock 5 Status */
+#define PMC_PCSR0_PID6 (0x1u << 6) /**< \brief (PMC_PCSR0) Peripheral Clock 6 Status */
+#define PMC_PCSR0_PID7 (0x1u << 7) /**< \brief (PMC_PCSR0) Peripheral Clock 7 Status */
+#define PMC_PCSR0_PID8 (0x1u << 8) /**< \brief (PMC_PCSR0) Peripheral Clock 8 Status */
+#define PMC_PCSR0_PID9 (0x1u << 9) /**< \brief (PMC_PCSR0) Peripheral Clock 9 Status */
+#define PMC_PCSR0_PID10 (0x1u << 10) /**< \brief (PMC_PCSR0) Peripheral Clock 10 Status */
+#define PMC_PCSR0_PID11 (0x1u << 11) /**< \brief (PMC_PCSR0) Peripheral Clock 11 Status */
+#define PMC_PCSR0_PID12 (0x1u << 12) /**< \brief (PMC_PCSR0) Peripheral Clock 12 Status */
+#define PMC_PCSR0_PID13 (0x1u << 13) /**< \brief (PMC_PCSR0) Peripheral Clock 13 Status */
+#define PMC_PCSR0_PID14 (0x1u << 14) /**< \brief (PMC_PCSR0) Peripheral Clock 14 Status */
+#define PMC_PCSR0_PID15 (0x1u << 15) /**< \brief (PMC_PCSR0) Peripheral Clock 15 Status */
+#define PMC_PCSR0_PID16 (0x1u << 16) /**< \brief (PMC_PCSR0) Peripheral Clock 16 Status */
+#define PMC_PCSR0_PID17 (0x1u << 17) /**< \brief (PMC_PCSR0) Peripheral Clock 17 Status */
+#define PMC_PCSR0_PID18 (0x1u << 18) /**< \brief (PMC_PCSR0) Peripheral Clock 18 Status */
+#define PMC_PCSR0_PID19 (0x1u << 19) /**< \brief (PMC_PCSR0) Peripheral Clock 19 Status */
+#define PMC_PCSR0_PID20 (0x1u << 20) /**< \brief (PMC_PCSR0) Peripheral Clock 20 Status */
+#define PMC_PCSR0_PID21 (0x1u << 21) /**< \brief (PMC_PCSR0) Peripheral Clock 21 Status */
+#define PMC_PCSR0_PID22 (0x1u << 22) /**< \brief (PMC_PCSR0) Peripheral Clock 22 Status */
+#define PMC_PCSR0_PID23 (0x1u << 23) /**< \brief (PMC_PCSR0) Peripheral Clock 23 Status */
+#define PMC_PCSR0_PID24 (0x1u << 24) /**< \brief (PMC_PCSR0) Peripheral Clock 24 Status */
+#define PMC_PCSR0_PID25 (0x1u << 25) /**< \brief (PMC_PCSR0) Peripheral Clock 25 Status */
+#define PMC_PCSR0_PID26 (0x1u << 26) /**< \brief (PMC_PCSR0) Peripheral Clock 26 Status */
+#define PMC_PCSR0_PID27 (0x1u << 27) /**< \brief (PMC_PCSR0) Peripheral Clock 27 Status */
+#define PMC_PCSR0_PID28 (0x1u << 28) /**< \brief (PMC_PCSR0) Peripheral Clock 28 Status */
+#define PMC_PCSR0_PID29 (0x1u << 29) /**< \brief (PMC_PCSR0) Peripheral Clock 29 Status */
+#define PMC_PCSR0_PID30 (0x1u << 30) /**< \brief (PMC_PCSR0) Peripheral Clock 30 Status */
+#define PMC_PCSR0_PID31 (0x1u << 31) /**< \brief (PMC_PCSR0) Peripheral Clock 31 Status */
+/* -------- CKGR_MOR : (PMC Offset: 0x0020) Main Oscillator Register -------- */
+#define CKGR_MOR_MOSCXTEN (0x1u << 0) /**< \brief (CKGR_MOR) Main Crystal Oscillator Enable */
+#define CKGR_MOR_MOSCXTBY (0x1u << 1) /**< \brief (CKGR_MOR) Main Crystal Oscillator Bypass */
+#define CKGR_MOR_WAITMODE (0x1u << 2) /**< \brief (CKGR_MOR) Wait Mode Command */
+#define CKGR_MOR_MOSCRCEN (0x1u << 3) /**< \brief (CKGR_MOR) Main On-Chip RC Oscillator Enable */
+#define CKGR_MOR_MOSCRCF_Pos 4
+#define CKGR_MOR_MOSCRCF_Msk (0x7u << CKGR_MOR_MOSCRCF_Pos) /**< \brief (CKGR_MOR) Main On-Chip RC Oscillator Frequency Selection */
+#define CKGR_MOR_MOSCRCF_4MHZ (0x0u << 4) /**< \brief (CKGR_MOR) Fast RC Oscillator Frequency is at 4 MHz */
+#define CKGR_MOR_MOSCRCF_8MHZ (0x1u << 4) /**< \brief (CKGR_MOR) Fast RC Oscillator Frequency is at 8 MHz */
+#define CKGR_MOR_MOSCRCF_12MHZ (0x2u << 4) /**< \brief (CKGR_MOR) Fast RC Oscillator Frequency is at 12 MHz */
+#define CKGR_MOR_MOSCXTST_Pos 8
+#define CKGR_MOR_MOSCXTST_Msk (0xffu << CKGR_MOR_MOSCXTST_Pos) /**< \brief (CKGR_MOR) Main Crystal Oscillator Start-up Time */
+#define CKGR_MOR_MOSCXTST(value) ((CKGR_MOR_MOSCXTST_Msk & ((value) << CKGR_MOR_MOSCXTST_Pos)))
+#define CKGR_MOR_KEY_Pos 16
+#define CKGR_MOR_KEY_Msk (0xffu << CKGR_MOR_KEY_Pos) /**< \brief (CKGR_MOR) Password */
+#define CKGR_MOR_KEY(value) ((CKGR_MOR_KEY_Msk & ((value) << CKGR_MOR_KEY_Pos)))
+#define CKGR_MOR_MOSCSEL (0x1u << 24) /**< \brief (CKGR_MOR) Main Oscillator Selection */
+#define CKGR_MOR_CFDEN (0x1u << 25) /**< \brief (CKGR_MOR) Clock Failure Detector Enable */
+/* -------- CKGR_MCFR : (PMC Offset: 0x0024) Main Clock Frequency Register -------- */
+#define CKGR_MCFR_MAINF_Pos 0
+#define CKGR_MCFR_MAINF_Msk (0xffffu << CKGR_MCFR_MAINF_Pos) /**< \brief (CKGR_MCFR) Main Clock Frequency */
+#define CKGR_MCFR_MAINFRDY (0x1u << 16) /**< \brief (CKGR_MCFR) Main Clock Ready */
+/* -------- CKGR_PLLAR : (PMC Offset: 0x0028) PLLA Register -------- */
+#define CKGR_PLLAR_DIVA_Pos 0
+#define CKGR_PLLAR_DIVA_Msk (0xffu << CKGR_PLLAR_DIVA_Pos) /**< \brief (CKGR_PLLAR) Divider */
+#define CKGR_PLLAR_DIVA(value) ((CKGR_PLLAR_DIVA_Msk & ((value) << CKGR_PLLAR_DIVA_Pos)))
+#define CKGR_PLLAR_PLLACOUNT_Pos 8
+#define CKGR_PLLAR_PLLACOUNT_Msk (0x3fu << CKGR_PLLAR_PLLACOUNT_Pos) /**< \brief (CKGR_PLLAR) PLLA Counter */
+#define CKGR_PLLAR_PLLACOUNT(value) ((CKGR_PLLAR_PLLACOUNT_Msk & ((value) << CKGR_PLLAR_PLLACOUNT_Pos)))
+#define CKGR_PLLAR_MULA_Pos 16
+#define CKGR_PLLAR_MULA_Msk (0x7ffu << CKGR_PLLAR_MULA_Pos) /**< \brief (CKGR_PLLAR) PLLA Multiplier */
+#define CKGR_PLLAR_MULA(value) ((CKGR_PLLAR_MULA_Msk & ((value) << CKGR_PLLAR_MULA_Pos)))
+#define CKGR_PLLAR_STUCKTO1 (0x1u << 29) /**< \brief (CKGR_PLLAR) */
+/* -------- CKGR_PLLBR : (PMC Offset: 0x002C) PLLB Register -------- */
+#define CKGR_PLLBR_DIVB_Pos 0
+#define CKGR_PLLBR_DIVB_Msk (0xffu << CKGR_PLLBR_DIVB_Pos) /**< \brief (CKGR_PLLBR) Divider */
+#define CKGR_PLLBR_DIVB(value) ((CKGR_PLLBR_DIVB_Msk & ((value) << CKGR_PLLBR_DIVB_Pos)))
+#define CKGR_PLLBR_PLLBCOUNT_Pos 8
+#define CKGR_PLLBR_PLLBCOUNT_Msk (0x3fu << CKGR_PLLBR_PLLBCOUNT_Pos) /**< \brief (CKGR_PLLBR) PLLB Counter */
+#define CKGR_PLLBR_PLLBCOUNT(value) ((CKGR_PLLBR_PLLBCOUNT_Msk & ((value) << CKGR_PLLBR_PLLBCOUNT_Pos)))
+#define CKGR_PLLBR_MULB_Pos 16
+#define CKGR_PLLBR_MULB_Msk (0x7ffu << CKGR_PLLBR_MULB_Pos) /**< \brief (CKGR_PLLBR) PLLB Multiplier */
+#define CKGR_PLLBR_MULB(value) ((CKGR_PLLBR_MULB_Msk & ((value) << CKGR_PLLBR_MULB_Pos)))
+/* -------- PMC_MCKR : (PMC Offset: 0x0030) Master Clock Register -------- */
+#define PMC_MCKR_CSS_Pos 0
+#define PMC_MCKR_CSS_Msk (0x3u << PMC_MCKR_CSS_Pos) /**< \brief (PMC_MCKR) Master Clock Source Selection */
+#define PMC_MCKR_CSS_SLOW_CLK (0x0u << 0) /**< \brief (PMC_MCKR) Slow Clock is selected */
+#define PMC_MCKR_CSS_MAIN_CLK (0x1u << 0) /**< \brief (PMC_MCKR) Main Clock is selected */
+#define PMC_MCKR_CSS_PLLA_CLK (0x2u << 0) /**< \brief (PMC_MCKR) PLLA Clock is selected */
+#define PMC_MCKR_CSS_PLLB_CLK (0x3u << 0) /**< \brief (PMC_MCKR) PLLB Clock is selected */
+#define PMC_MCKR_PRES_Pos 4
+#define PMC_MCKR_PRES_Msk (0x7u << PMC_MCKR_PRES_Pos) /**< \brief (PMC_MCKR) Processor Clock Prescaler */
+#define PMC_MCKR_PRES_CLK (0x0u << 4) /**< \brief (PMC_MCKR) Selected clock */
+#define PMC_MCKR_PRES_CLK_2 (0x1u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 2 */
+#define PMC_MCKR_PRES_CLK_4 (0x2u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 4 */
+#define PMC_MCKR_PRES_CLK_8 (0x3u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 8 */
+#define PMC_MCKR_PRES_CLK_16 (0x4u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 16 */
+#define PMC_MCKR_PRES_CLK_32 (0x5u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 32 */
+#define PMC_MCKR_PRES_CLK_64 (0x6u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 64 */
+#define PMC_MCKR_PRES_CLK_3 (0x7u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 3 */
+#define PMC_MCKR_PLLADIV2 (0x1u << 12) /**< \brief (PMC_MCKR) PLLA Divisor by 2 */
+#define PMC_MCKR_PLLBDIV2 (0x1u << 13) /**< \brief (PMC_MCKR) PLLB Divisor by 2 */
+/* -------- PMC_USB : (PMC Offset: 0x0038) USB Clock Register -------- */
+#define PMC_USB_USBS (0x1u << 0) /**< \brief (PMC_USB) USB Input Clock Selection */
+#define PMC_USB_USBDIV_Pos 8
+#define PMC_USB_USBDIV_Msk (0xfu << PMC_USB_USBDIV_Pos) /**< \brief (PMC_USB) Divider for USB Clock. */
+#define PMC_USB_USBDIV(value) ((PMC_USB_USBDIV_Msk & ((value) << PMC_USB_USBDIV_Pos)))
+/* -------- PMC_PCK[3] : (PMC Offset: 0x0040) Programmable Clock 0 Register -------- */
+#define PMC_PCK_CSS_Pos 0
+#define PMC_PCK_CSS_Msk (0x7u << PMC_PCK_CSS_Pos) /**< \brief (PMC_PCK[3]) Master Clock Source Selection */
+#define PMC_PCK_CSS_SLOW_CLK (0x0u << 0) /**< \brief (PMC_PCK[3]) Slow Clock is selected */
+#define PMC_PCK_CSS_MAIN_CLK (0x1u << 0) /**< \brief (PMC_PCK[3]) Main Clock is selected */
+#define PMC_PCK_CSS_PLLA_CLK (0x2u << 0) /**< \brief (PMC_PCK[3]) PLLA Clock is selected */
+#define PMC_PCK_CSS_PLLB_CLK (0x3u << 0) /**< \brief (PMC_PCK[3]) PLLB Clock is selected */
+#define PMC_PCK_CSS_MCK (0x4u << 0) /**< \brief (PMC_PCK[3]) Master Clock is selected */
+#define PMC_PCK_PRES_Pos 4
+#define PMC_PCK_PRES_Msk (0x7u << PMC_PCK_PRES_Pos) /**< \brief (PMC_PCK[3]) Programmable Clock Prescaler */
+#define PMC_PCK_PRES_CLK (0x0u << 4) /**< \brief (PMC_PCK[3]) Selected clock */
+#define PMC_PCK_PRES_CLK_2 (0x1u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 2 */
+#define PMC_PCK_PRES_CLK_4 (0x2u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 4 */
+#define PMC_PCK_PRES_CLK_8 (0x3u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 8 */
+#define PMC_PCK_PRES_CLK_16 (0x4u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 16 */
+#define PMC_PCK_PRES_CLK_32 (0x5u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 32 */
+#define PMC_PCK_PRES_CLK_64 (0x6u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 64 */
+/* -------- PMC_IER : (PMC Offset: 0x0060) Interrupt Enable Register -------- */
+#define PMC_IER_MOSCXTS (0x1u << 0) /**< \brief (PMC_IER) Main Crystal Oscillator Status Interrupt Enable */
+#define PMC_IER_LOCKA (0x1u << 1) /**< \brief (PMC_IER) PLLA Lock Interrupt Enable */
+#define PMC_IER_LOCKB (0x1u << 2) /**< \brief (PMC_IER) PLLB Lock Interrupt Enable */
+#define PMC_IER_MCKRDY (0x1u << 3) /**< \brief (PMC_IER) Master Clock Ready Interrupt Enable */
+#define PMC_IER_PCKRDY0 (0x1u << 8) /**< \brief (PMC_IER) Programmable Clock Ready 0 Interrupt Enable */
+#define PMC_IER_PCKRDY1 (0x1u << 9) /**< \brief (PMC_IER) Programmable Clock Ready 1 Interrupt Enable */
+#define PMC_IER_PCKRDY2 (0x1u << 10) /**< \brief (PMC_IER) Programmable Clock Ready 2 Interrupt Enable */
+#define PMC_IER_MOSCSELS (0x1u << 16) /**< \brief (PMC_IER) Main Oscillator Selection Status Interrupt Enable */
+#define PMC_IER_MOSCRCS (0x1u << 17) /**< \brief (PMC_IER) Main On-Chip RC Status Interrupt Enable */
+#define PMC_IER_CFDEV (0x1u << 18) /**< \brief (PMC_IER) Clock Failure Detector Event Interrupt Enable */
+/* -------- PMC_IDR : (PMC Offset: 0x0064) Interrupt Disable Register -------- */
+#define PMC_IDR_MOSCXTS (0x1u << 0) /**< \brief (PMC_IDR) Main Crystal Oscillator Status Interrupt Disable */
+#define PMC_IDR_LOCKA (0x1u << 1) /**< \brief (PMC_IDR) PLLA Lock Interrupt Disable */
+#define PMC_IDR_LOCKB (0x1u << 2) /**< \brief (PMC_IDR) PLLB Lock Interrupt Disable */
+#define PMC_IDR_MCKRDY (0x1u << 3) /**< \brief (PMC_IDR) Master Clock Ready Interrupt Disable */
+#define PMC_IDR_PCKRDY0 (0x1u << 8) /**< \brief (PMC_IDR) Programmable Clock Ready 0 Interrupt Disable */
+#define PMC_IDR_PCKRDY1 (0x1u << 9) /**< \brief (PMC_IDR) Programmable Clock Ready 1 Interrupt Disable */
+#define PMC_IDR_PCKRDY2 (0x1u << 10) /**< \brief (PMC_IDR) Programmable Clock Ready 2 Interrupt Disable */
+#define PMC_IDR_MOSCSELS (0x1u << 16) /**< \brief (PMC_IDR) Main Oscillator Selection Status Interrupt Disable */
+#define PMC_IDR_MOSCRCS (0x1u << 17) /**< \brief (PMC_IDR) Main On-Chip RC Status Interrupt Disable */
+#define PMC_IDR_CFDEV (0x1u << 18) /**< \brief (PMC_IDR) Clock Failure Detector Event Interrupt Disable */
+/* -------- PMC_SR : (PMC Offset: 0x0068) Status Register -------- */
+#define PMC_SR_MOSCXTS (0x1u << 0) /**< \brief (PMC_SR) Main XTAL Oscillator Status */
+#define PMC_SR_LOCKA (0x1u << 1) /**< \brief (PMC_SR) PLLA Lock Status */
+#define PMC_SR_LOCKB (0x1u << 2) /**< \brief (PMC_SR) PLLB Lock Status */
+#define PMC_SR_MCKRDY (0x1u << 3) /**< \brief (PMC_SR) Master Clock Status */
+#define PMC_SR_OSCSELS (0x1u << 7) /**< \brief (PMC_SR) Slow Clock Oscillator Selection */
+#define PMC_SR_PCKRDY0 (0x1u << 8) /**< \brief (PMC_SR) Programmable Clock Ready Status */
+#define PMC_SR_PCKRDY1 (0x1u << 9) /**< \brief (PMC_SR) Programmable Clock Ready Status */
+#define PMC_SR_PCKRDY2 (0x1u << 10) /**< \brief (PMC_SR) Programmable Clock Ready Status */
+#define PMC_SR_MOSCSELS (0x1u << 16) /**< \brief (PMC_SR) Main Oscillator Selection Status */
+#define PMC_SR_MOSCRCS (0x1u << 17) /**< \brief (PMC_SR) Main On-Chip RC Oscillator Status */
+#define PMC_SR_CFDEV (0x1u << 18) /**< \brief (PMC_SR) Clock Failure Detector Event */
+#define PMC_SR_CFDS (0x1u << 19) /**< \brief (PMC_SR) Clock Failure Detector Status */
+#define PMC_SR_FOS (0x1u << 20) /**< \brief (PMC_SR) Clock Failure Detector Fault Output Status */
+/* -------- PMC_IMR : (PMC Offset: 0x006C) Interrupt Mask Register -------- */
+#define PMC_IMR_MOSCXTS (0x1u << 0) /**< \brief (PMC_IMR) Main Crystal Oscillator Status Interrupt Mask */
+#define PMC_IMR_LOCKA (0x1u << 1) /**< \brief (PMC_IMR) PLLA Lock Interrupt Mask */
+#define PMC_IMR_LOCKB (0x1u << 2) /**< \brief (PMC_IMR) PLLB Lock Interrupt Mask */
+#define PMC_IMR_MCKRDY (0x1u << 3) /**< \brief (PMC_IMR) Master Clock Ready Interrupt Mask */
+#define PMC_IMR_PCKRDY0 (0x1u << 8) /**< \brief (PMC_IMR) Programmable Clock Ready 0 Interrupt Mask */
+#define PMC_IMR_PCKRDY1 (0x1u << 9) /**< \brief (PMC_IMR) Programmable Clock Ready 1 Interrupt Mask */
+#define PMC_IMR_PCKRDY2 (0x1u << 10) /**< \brief (PMC_IMR) Programmable Clock Ready 2 Interrupt Mask */
+#define PMC_IMR_MOSCSELS (0x1u << 16) /**< \brief (PMC_IMR) Main Oscillator Selection Status Interrupt Mask */
+#define PMC_IMR_MOSCRCS (0x1u << 17) /**< \brief (PMC_IMR) Main On-Chip RC Status Interrupt Mask */
+#define PMC_IMR_CFDEV (0x1u << 18) /**< \brief (PMC_IMR) Clock Failure Detector Event Interrupt Mask */
+/* -------- PMC_FSMR : (PMC Offset: 0x0070) Fast Startup Mode Register -------- */
+#define PMC_FSMR_FSTT0 (0x1u << 0) /**< \brief (PMC_FSMR) Fast Startup Input Enable 0 */
+#define PMC_FSMR_FSTT1 (0x1u << 1) /**< \brief (PMC_FSMR) Fast Startup Input Enable 1 */
+#define PMC_FSMR_FSTT2 (0x1u << 2) /**< \brief (PMC_FSMR) Fast Startup Input Enable 2 */
+#define PMC_FSMR_FSTT3 (0x1u << 3) /**< \brief (PMC_FSMR) Fast Startup Input Enable 3 */
+#define PMC_FSMR_FSTT4 (0x1u << 4) /**< \brief (PMC_FSMR) Fast Startup Input Enable 4 */
+#define PMC_FSMR_FSTT5 (0x1u << 5) /**< \brief (PMC_FSMR) Fast Startup Input Enable 5 */
+#define PMC_FSMR_FSTT6 (0x1u << 6) /**< \brief (PMC_FSMR) Fast Startup Input Enable 6 */
+#define PMC_FSMR_FSTT7 (0x1u << 7) /**< \brief (PMC_FSMR) Fast Startup Input Enable 7 */
+#define PMC_FSMR_FSTT8 (0x1u << 8) /**< \brief (PMC_FSMR) Fast Startup Input Enable 8 */
+#define PMC_FSMR_FSTT9 (0x1u << 9) /**< \brief (PMC_FSMR) Fast Startup Input Enable 9 */
+#define PMC_FSMR_FSTT10 (0x1u << 10) /**< \brief (PMC_FSMR) Fast Startup Input Enable 10 */
+#define PMC_FSMR_FSTT11 (0x1u << 11) /**< \brief (PMC_FSMR) Fast Startup Input Enable 11 */
+#define PMC_FSMR_FSTT12 (0x1u << 12) /**< \brief (PMC_FSMR) Fast Startup Input Enable 12 */
+#define PMC_FSMR_FSTT13 (0x1u << 13) /**< \brief (PMC_FSMR) Fast Startup Input Enable 13 */
+#define PMC_FSMR_FSTT14 (0x1u << 14) /**< \brief (PMC_FSMR) Fast Startup Input Enable 14 */
+#define PMC_FSMR_FSTT15 (0x1u << 15) /**< \brief (PMC_FSMR) Fast Startup Input Enable 15 */
+#define PMC_FSMR_RTTAL (0x1u << 16) /**< \brief (PMC_FSMR) RTT Alarm Enable */
+#define PMC_FSMR_RTCAL (0x1u << 17) /**< \brief (PMC_FSMR) RTC Alarm Enable */
+#define PMC_FSMR_USBAL (0x1u << 18) /**< \brief (PMC_FSMR) USB Alarm Enable */
+#define PMC_FSMR_LPM (0x1u << 20) /**< \brief (PMC_FSMR) Low Power Mode */
+/* -------- PMC_FSPR : (PMC Offset: 0x0074) Fast Startup Polarity Register -------- */
+#define PMC_FSPR_FSTP0 (0x1u << 0) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP1 (0x1u << 1) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP2 (0x1u << 2) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP3 (0x1u << 3) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP4 (0x1u << 4) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP5 (0x1u << 5) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP6 (0x1u << 6) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP7 (0x1u << 7) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP8 (0x1u << 8) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP9 (0x1u << 9) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP10 (0x1u << 10) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP11 (0x1u << 11) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP12 (0x1u << 12) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP13 (0x1u << 13) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP14 (0x1u << 14) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+#define PMC_FSPR_FSTP15 (0x1u << 15) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */
+/* -------- PMC_FOCR : (PMC Offset: 0x0078) Fault Output Clear Register -------- */
+#define PMC_FOCR_FOCLR (0x1u << 0) /**< \brief (PMC_FOCR) Fault Output Clear */
+/* -------- PMC_WPMR : (PMC Offset: 0x00E4) Write Protect Mode Register -------- */
+#define PMC_WPMR_WPEN (0x1u << 0) /**< \brief (PMC_WPMR) Write Protect Enable */
+#define PMC_WPMR_WPKEY_Pos 8
+#define PMC_WPMR_WPKEY_Msk (0xffffffu << PMC_WPMR_WPKEY_Pos) /**< \brief (PMC_WPMR) Write Protect KEY */
+#define PMC_WPMR_WPKEY(value) ((PMC_WPMR_WPKEY_Msk & ((value) << PMC_WPMR_WPKEY_Pos)))
+/* -------- PMC_WPSR : (PMC Offset: 0x00E8) Write Protect Status Register -------- */
+#define PMC_WPSR_WPVS (0x1u << 0) /**< \brief (PMC_WPSR) Write Protect Violation Status */
+#define PMC_WPSR_WPVSRC_Pos 8
+#define PMC_WPSR_WPVSRC_Msk (0xffffu << PMC_WPSR_WPVSRC_Pos) /**< \brief (PMC_WPSR) Write Protect Violation Source */
+/* -------- PMC_PCER1 : (PMC Offset: 0x0100) Peripheral Clock Enable Register 1 -------- */
+#define PMC_PCER1_PID32 (0x1u << 0) /**< \brief (PMC_PCER1) Peripheral Clock 32 Enable */
+#define PMC_PCER1_PID33 (0x1u << 1) /**< \brief (PMC_PCER1) Peripheral Clock 33 Enable */
+#define PMC_PCER1_PID34 (0x1u << 2) /**< \brief (PMC_PCER1) Peripheral Clock 34 Enable */
+#define PMC_PCER1_PID35 (0x1u << 3) /**< \brief (PMC_PCER1) Peripheral Clock 35 Enable */
+#define PMC_PCER1_PID36 (0x1u << 4) /**< \brief (PMC_PCER1) Peripheral Clock 36 Enable */
+#define PMC_PCER1_PID37 (0x1u << 5) /**< \brief (PMC_PCER1) Peripheral Clock 37 Enable */
+#define PMC_PCER1_PID38 (0x1u << 6) /**< \brief (PMC_PCER1) Peripheral Clock 38 Enable */
+#define PMC_PCER1_PID39 (0x1u << 7) /**< \brief (PMC_PCER1) Peripheral Clock 39 Enable */
+#define PMC_PCER1_PID40 (0x1u << 8) /**< \brief (PMC_PCER1) Peripheral Clock 40 Enable */
+#define PMC_PCER1_PID41 (0x1u << 9) /**< \brief (PMC_PCER1) Peripheral Clock 41 Enable */
+#define PMC_PCER1_PID42 (0x1u << 10) /**< \brief (PMC_PCER1) Peripheral Clock 42 Enable */
+#define PMC_PCER1_PID43 (0x1u << 11) /**< \brief (PMC_PCER1) Peripheral Clock 43 Enable */
+#define PMC_PCER1_PID44 (0x1u << 12) /**< \brief (PMC_PCER1) Peripheral Clock 44 Enable */
+#define PMC_PCER1_PID45 (0x1u << 13) /**< \brief (PMC_PCER1) Peripheral Clock 45 Enable */
+#define PMC_PCER1_PID46 (0x1u << 14) /**< \brief (PMC_PCER1) Peripheral Clock 46 Enable */
+#define PMC_PCER1_PID47 (0x1u << 15) /**< \brief (PMC_PCER1) Peripheral Clock 47 Enable */
+#define PMC_PCER1_PID48 (0x1u << 16) /**< \brief (PMC_PCER1) Peripheral Clock 48 Enable */
+#define PMC_PCER1_PID49 (0x1u << 17) /**< \brief (PMC_PCER1) Peripheral Clock 49 Enable */
+#define PMC_PCER1_PID50 (0x1u << 18) /**< \brief (PMC_PCER1) Peripheral Clock 50 Enable */
+#define PMC_PCER1_PID51 (0x1u << 19) /**< \brief (PMC_PCER1) Peripheral Clock 51 Enable */
+#define PMC_PCER1_PID52 (0x1u << 20) /**< \brief (PMC_PCER1) Peripheral Clock 52 Enable */
+#define PMC_PCER1_PID53 (0x1u << 21) /**< \brief (PMC_PCER1) Peripheral Clock 53 Enable */
+#define PMC_PCER1_PID54 (0x1u << 22) /**< \brief (PMC_PCER1) Peripheral Clock 54 Enable */
+#define PMC_PCER1_PID55 (0x1u << 23) /**< \brief (PMC_PCER1) Peripheral Clock 55 Enable */
+#define PMC_PCER1_PID56 (0x1u << 24) /**< \brief (PMC_PCER1) Peripheral Clock 56 Enable */
+#define PMC_PCER1_PID57 (0x1u << 25) /**< \brief (PMC_PCER1) Peripheral Clock 57 Enable */
+#define PMC_PCER1_PID58 (0x1u << 26) /**< \brief (PMC_PCER1) Peripheral Clock 58 Enable */
+#define PMC_PCER1_PID59 (0x1u << 27) /**< \brief (PMC_PCER1) Peripheral Clock 59 Enable */
+#define PMC_PCER1_PID60 (0x1u << 28) /**< \brief (PMC_PCER1) Peripheral Clock 60 Enable */
+#define PMC_PCER1_PID61 (0x1u << 29) /**< \brief (PMC_PCER1) Peripheral Clock 61 Enable */
+#define PMC_PCER1_PID62 (0x1u << 30) /**< \brief (PMC_PCER1) Peripheral Clock 62 Enable */
+#define PMC_PCER1_PID63 (0x1u << 31) /**< \brief (PMC_PCER1) Peripheral Clock 63 Enable */
+/* -------- PMC_PCDR1 : (PMC Offset: 0x0104) Peripheral Clock Disable Register 1 -------- */
+#define PMC_PCDR1_PID32 (0x1u << 0) /**< \brief (PMC_PCDR1) Peripheral Clock 32 Disable */
+#define PMC_PCDR1_PID33 (0x1u << 1) /**< \brief (PMC_PCDR1) Peripheral Clock 33 Disable */
+#define PMC_PCDR1_PID34 (0x1u << 2) /**< \brief (PMC_PCDR1) Peripheral Clock 34 Disable */
+#define PMC_PCDR1_PID35 (0x1u << 3) /**< \brief (PMC_PCDR1) Peripheral Clock 35 Disable */
+#define PMC_PCDR1_PID36 (0x1u << 4) /**< \brief (PMC_PCDR1) Peripheral Clock 36 Disable */
+#define PMC_PCDR1_PID37 (0x1u << 5) /**< \brief (PMC_PCDR1) Peripheral Clock 37 Disable */
+#define PMC_PCDR1_PID38 (0x1u << 6) /**< \brief (PMC_PCDR1) Peripheral Clock 38 Disable */
+#define PMC_PCDR1_PID39 (0x1u << 7) /**< \brief (PMC_PCDR1) Peripheral Clock 39 Disable */
+#define PMC_PCDR1_PID40 (0x1u << 8) /**< \brief (PMC_PCDR1) Peripheral Clock 40 Disable */
+#define PMC_PCDR1_PID41 (0x1u << 9) /**< \brief (PMC_PCDR1) Peripheral Clock 41 Disable */
+#define PMC_PCDR1_PID42 (0x1u << 10) /**< \brief (PMC_PCDR1) Peripheral Clock 42 Disable */
+#define PMC_PCDR1_PID43 (0x1u << 11) /**< \brief (PMC_PCDR1) Peripheral Clock 43 Disable */
+#define PMC_PCDR1_PID44 (0x1u << 12) /**< \brief (PMC_PCDR1) Peripheral Clock 44 Disable */
+#define PMC_PCDR1_PID45 (0x1u << 13) /**< \brief (PMC_PCDR1) Peripheral Clock 45 Disable */
+#define PMC_PCDR1_PID46 (0x1u << 14) /**< \brief (PMC_PCDR1) Peripheral Clock 46 Disable */
+#define PMC_PCDR1_PID47 (0x1u << 15) /**< \brief (PMC_PCDR1) Peripheral Clock 47 Disable */
+#define PMC_PCDR1_PID48 (0x1u << 16) /**< \brief (PMC_PCDR1) Peripheral Clock 48 Disable */
+#define PMC_PCDR1_PID49 (0x1u << 17) /**< \brief (PMC_PCDR1) Peripheral Clock 49 Disable */
+#define PMC_PCDR1_PID50 (0x1u << 18) /**< \brief (PMC_PCDR1) Peripheral Clock 50 Disable */
+#define PMC_PCDR1_PID51 (0x1u << 19) /**< \brief (PMC_PCDR1) Peripheral Clock 51 Disable */
+#define PMC_PCDR1_PID52 (0x1u << 20) /**< \brief (PMC_PCDR1) Peripheral Clock 52 Disable */
+#define PMC_PCDR1_PID53 (0x1u << 21) /**< \brief (PMC_PCDR1) Peripheral Clock 53 Disable */
+#define PMC_PCDR1_PID54 (0x1u << 22) /**< \brief (PMC_PCDR1) Peripheral Clock 54 Disable */
+#define PMC_PCDR1_PID55 (0x1u << 23) /**< \brief (PMC_PCDR1) Peripheral Clock 55 Disable */
+#define PMC_PCDR1_PID56 (0x1u << 24) /**< \brief (PMC_PCDR1) Peripheral Clock 56 Disable */
+#define PMC_PCDR1_PID57 (0x1u << 25) /**< \brief (PMC_PCDR1) Peripheral Clock 57 Disable */
+#define PMC_PCDR1_PID58 (0x1u << 26) /**< \brief (PMC_PCDR1) Peripheral Clock 58 Disable */
+#define PMC_PCDR1_PID59 (0x1u << 27) /**< \brief (PMC_PCDR1) Peripheral Clock 59 Disable */
+#define PMC_PCDR1_PID60 (0x1u << 28) /**< \brief (PMC_PCDR1) Peripheral Clock 60 Disable */
+#define PMC_PCDR1_PID61 (0x1u << 29) /**< \brief (PMC_PCDR1) Peripheral Clock 61 Disable */
+#define PMC_PCDR1_PID62 (0x1u << 30) /**< \brief (PMC_PCDR1) Peripheral Clock 62 Disable */
+#define PMC_PCDR1_PID63 (0x1u << 31) /**< \brief (PMC_PCDR1) Peripheral Clock 63 Disable */
+/* -------- PMC_PCSR1 : (PMC Offset: 0x0108) Peripheral Clock Status Register 1 -------- */
+#define PMC_PCSR1_PID32 (0x1u << 0) /**< \brief (PMC_PCSR1) Peripheral Clock 32 Status */
+#define PMC_PCSR1_PID33 (0x1u << 1) /**< \brief (PMC_PCSR1) Peripheral Clock 33 Status */
+#define PMC_PCSR1_PID34 (0x1u << 2) /**< \brief (PMC_PCSR1) Peripheral Clock 34 Status */
+#define PMC_PCSR1_PID35 (0x1u << 3) /**< \brief (PMC_PCSR1) Peripheral Clock 35 Status */
+#define PMC_PCSR1_PID36 (0x1u << 4) /**< \brief (PMC_PCSR1) Peripheral Clock 36 Status */
+#define PMC_PCSR1_PID37 (0x1u << 5) /**< \brief (PMC_PCSR1) Peripheral Clock 37 Status */
+#define PMC_PCSR1_PID38 (0x1u << 6) /**< \brief (PMC_PCSR1) Peripheral Clock 38 Status */
+#define PMC_PCSR1_PID39 (0x1u << 7) /**< \brief (PMC_PCSR1) Peripheral Clock 39 Status */
+#define PMC_PCSR1_PID40 (0x1u << 8) /**< \brief (PMC_PCSR1) Peripheral Clock 40 Status */
+#define PMC_PCSR1_PID41 (0x1u << 9) /**< \brief (PMC_PCSR1) Peripheral Clock 41 Status */
+#define PMC_PCSR1_PID42 (0x1u << 10) /**< \brief (PMC_PCSR1) Peripheral Clock 42 Status */
+#define PMC_PCSR1_PID43 (0x1u << 11) /**< \brief (PMC_PCSR1) Peripheral Clock 43 Status */
+#define PMC_PCSR1_PID44 (0x1u << 12) /**< \brief (PMC_PCSR1) Peripheral Clock 44 Status */
+#define PMC_PCSR1_PID45 (0x1u << 13) /**< \brief (PMC_PCSR1) Peripheral Clock 45 Status */
+#define PMC_PCSR1_PID46 (0x1u << 14) /**< \brief (PMC_PCSR1) Peripheral Clock 46 Status */
+#define PMC_PCSR1_PID47 (0x1u << 15) /**< \brief (PMC_PCSR1) Peripheral Clock 47 Status */
+#define PMC_PCSR1_PID48 (0x1u << 16) /**< \brief (PMC_PCSR1) Peripheral Clock 48 Status */
+#define PMC_PCSR1_PID49 (0x1u << 17) /**< \brief (PMC_PCSR1) Peripheral Clock 49 Status */
+#define PMC_PCSR1_PID50 (0x1u << 18) /**< \brief (PMC_PCSR1) Peripheral Clock 50 Status */
+#define PMC_PCSR1_PID51 (0x1u << 19) /**< \brief (PMC_PCSR1) Peripheral Clock 51 Status */
+#define PMC_PCSR1_PID52 (0x1u << 20) /**< \brief (PMC_PCSR1) Peripheral Clock 52 Status */
+#define PMC_PCSR1_PID53 (0x1u << 21) /**< \brief (PMC_PCSR1) Peripheral Clock 53 Status */
+#define PMC_PCSR1_PID54 (0x1u << 22) /**< \brief (PMC_PCSR1) Peripheral Clock 54 Status */
+#define PMC_PCSR1_PID55 (0x1u << 23) /**< \brief (PMC_PCSR1) Peripheral Clock 55 Status */
+#define PMC_PCSR1_PID56 (0x1u << 24) /**< \brief (PMC_PCSR1) Peripheral Clock 56 Status */
+#define PMC_PCSR1_PID57 (0x1u << 25) /**< \brief (PMC_PCSR1) Peripheral Clock 57 Status */
+#define PMC_PCSR1_PID58 (0x1u << 26) /**< \brief (PMC_PCSR1) Peripheral Clock 58 Status */
+#define PMC_PCSR1_PID59 (0x1u << 27) /**< \brief (PMC_PCSR1) Peripheral Clock 59 Status */
+#define PMC_PCSR1_PID60 (0x1u << 28) /**< \brief (PMC_PCSR1) Peripheral Clock 60 Status */
+#define PMC_PCSR1_PID61 (0x1u << 29) /**< \brief (PMC_PCSR1) Peripheral Clock 61 Status */
+#define PMC_PCSR1_PID62 (0x1u << 30) /**< \brief (PMC_PCSR1) Peripheral Clock 62 Status */
+#define PMC_PCSR1_PID63 (0x1u << 31) /**< \brief (PMC_PCSR1) Peripheral Clock 63 Status */
+/* -------- PMC_OCR : (PMC Offset: 0x0110) Oscillator Calibration Register -------- */
+#define PMC_OCR_CAL4_Pos 0
+#define PMC_OCR_CAL4_Msk (0x7fu << PMC_OCR_CAL4_Pos) /**< \brief (PMC_OCR) RC Oscillator Calibration bits for 4 Mhz */
+#define PMC_OCR_CAL4(value) ((PMC_OCR_CAL4_Msk & ((value) << PMC_OCR_CAL4_Pos)))
+#define PMC_OCR_SEL4 (0x1u << 7) /**< \brief (PMC_OCR) Selection of RC Oscillator Calibration bits for 4 Mhz */
+#define PMC_OCR_CAL8_Pos 8
+#define PMC_OCR_CAL8_Msk (0x7fu << PMC_OCR_CAL8_Pos) /**< \brief (PMC_OCR) RC Oscillator Calibration bits for 8 Mhz */
+#define PMC_OCR_CAL8(value) ((PMC_OCR_CAL8_Msk & ((value) << PMC_OCR_CAL8_Pos)))
+#define PMC_OCR_SEL8 (0x1u << 15) /**< \brief (PMC_OCR) Selection of RC Oscillator Calibration bits for 8 Mhz */
+#define PMC_OCR_CAL12_Pos 16
+#define PMC_OCR_CAL12_Msk (0x7fu << PMC_OCR_CAL12_Pos) /**< \brief (PMC_OCR) RC Oscillator Calibration bits for 12 Mhz */
+#define PMC_OCR_CAL12(value) ((PMC_OCR_CAL12_Msk & ((value) << PMC_OCR_CAL12_Pos)))
+#define PMC_OCR_SEL12 (0x1u << 23) /**< \brief (PMC_OCR) Selection of RC Oscillator Calibration bits for 12 Mhz */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Pulse Width Modulation Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_PWM Pulse Width Modulation Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief PwmCh_num hardware registers */
+typedef struct {
+ RwReg PWM_CMR; /**< \brief (PwmCh_num Offset: 0x0) PWM Channel Mode Register */
+ RwReg PWM_CDTY; /**< \brief (PwmCh_num Offset: 0x4) PWM Channel Duty Cycle Register */
+ RwReg PWM_CDTYUPD; /**< \brief (PwmCh_num Offset: 0x8) PWM Channel Duty Cycle Update Register */
+ RwReg PWM_CPRD; /**< \brief (PwmCh_num Offset: 0xC) PWM Channel Period Register */
+ RwReg PWM_CPRDUPD; /**< \brief (PwmCh_num Offset: 0x10) PWM Channel Period Update Register */
+ RwReg PWM_CCNT; /**< \brief (PwmCh_num Offset: 0x14) PWM Channel Counter Register */
+ RwReg PWM_DT; /**< \brief (PwmCh_num Offset: 0x18) PWM Channel Dead Time Register */
+ RwReg PWM_DTUPD; /**< \brief (PwmCh_num Offset: 0x1C) PWM Channel Dead Time Update Register */
+} PwmCh_num;
+/** \brief PwmCmp hardware registers */
+typedef struct {
+ RwReg PWM_CMPxV; /**< \brief (PwmCmp Offset: 0x0) PWM Comparison 0 Value Register */
+ RwReg PWM_CMPxVUPD; /**< \brief (PwmCmp Offset: 0x4) PWM Comparison 0 Value Update Register */
+ RwReg PWM_CMPxM; /**< \brief (PwmCmp Offset: 0x8) PWM Comparison 0 Mode Register */
+ RwReg PWM_CMPxMUPD; /**< \brief (PwmCmp Offset: 0xC) PWM Comparison 0 Mode Update Register */
+} PwmCmp;
+/** \brief Pwm hardware registers */
+typedef struct {
+ RwReg PWM_CLK; /**< \brief (Pwm Offset: 0x00) PWM Clock Register */
+ WoReg PWM_ENA; /**< \brief (Pwm Offset: 0x04) PWM Enable Register */
+ WoReg PWM_DIS; /**< \brief (Pwm Offset: 0x08) PWM Disable Register */
+ RoReg PWM_SR; /**< \brief (Pwm Offset: 0x0C) PWM Status Register */
+ WoReg PWM_IER1; /**< \brief (Pwm Offset: 0x10) PWM Interrupt Enable Register 1 */
+ WoReg PWM_IDR1; /**< \brief (Pwm Offset: 0x14) PWM Interrupt Disable Register 1 */
+ RoReg PWM_IMR1; /**< \brief (Pwm Offset: 0x18) PWM Interrupt Mask Register 1 */
+ RoReg PWM_ISR1; /**< \brief (Pwm Offset: 0x1C) PWM Interrupt Status Register 1 */
+ RwReg PWM_SCM; /**< \brief (Pwm Offset: 0x20) PWM Sync Channels Mode Register */
+ RwReg Reserved1[1];
+ RwReg PWM_SCUC; /**< \brief (Pwm Offset: 0x28) PWM Sync Channels Update Control Register */
+ RwReg PWM_SCUP; /**< \brief (Pwm Offset: 0x2C) PWM Sync Channels Update Period Register */
+ WoReg PWM_SCUPUPD; /**< \brief (Pwm Offset: 0x30) PWM Sync Channels Update Period Update Register */
+ WoReg PWM_IER2; /**< \brief (Pwm Offset: 0x34) PWM Interrupt Enable Register 2 */
+ WoReg PWM_IDR2; /**< \brief (Pwm Offset: 0x38) PWM Interrupt Disable Register 2 */
+ RoReg PWM_IMR2; /**< \brief (Pwm Offset: 0x3C) PWM Interrupt Mask Register 2 */
+ RoReg PWM_ISR2; /**< \brief (Pwm Offset: 0x40) PWM Interrupt Status Register 2 */
+ RwReg PWM_OOV; /**< \brief (Pwm Offset: 0x44) PWM Output Override Value Register */
+ RwReg PWM_OS; /**< \brief (Pwm Offset: 0x48) PWM Output Selection Register */
+ WoReg PWM_OSS; /**< \brief (Pwm Offset: 0x4C) PWM Output Selection Set Register */
+ WoReg PWM_OSC; /**< \brief (Pwm Offset: 0x50) PWM Output Selection Clear Register */
+ WoReg PWM_OSSUPD; /**< \brief (Pwm Offset: 0x54) PWM Output Selection Set Update Register */
+ WoReg PWM_OSCUPD; /**< \brief (Pwm Offset: 0x58) PWM Output Selection Clear Update Register */
+ RwReg PWM_FMR; /**< \brief (Pwm Offset: 0x5C) PWM Fault Mode Register */
+ RoReg PWM_FSR; /**< \brief (Pwm Offset: 0x60) PWM Fault Status Register */
+ WoReg PWM_FCR; /**< \brief (Pwm Offset: 0x64) PWM Fault Clear Register */
+ RwReg PWM_FPV; /**< \brief (Pwm Offset: 0x68) PWM Fault Protection Value Register */
+ RwReg PWM_FPE; /**< \brief (Pwm Offset: 0x6C) PWM Fault Protection Enable Register */
+ RwReg Reserved2[3];
+ RwReg PWM_ELxMR[2]; /**< \brief (Pwm Offset: 0x7C) PWM Event Line 0 Mode Register */
+ RwReg Reserved3[11];
+ RwReg PWM_SMMR; /**< \brief (Pwm Offset: 0xB0) PWM Stepper Motor Mode Register */
+ RwReg Reserved4[12];
+ WoReg PWM_WPCR; /**< \brief (Pwm Offset: 0xE4) PWM Write Protect Control Register */
+ RoReg PWM_WPSR; /**< \brief (Pwm Offset: 0xE8) PWM Write Protect Status Register */
+ RwReg Reserved5[5];
+ RwReg PWM_RPR; /**< \brief (Pwm Offset: 0x100) Receive Pointer Register */
+ RwReg PWM_RCR; /**< \brief (Pwm Offset: 0x104) Receive Counter Register */
+ RwReg PWM_TPR; /**< \brief (Pwm Offset: 0x108) Transmit Pointer Register */
+ RwReg PWM_TCR; /**< \brief (Pwm Offset: 0x10C) Transmit Counter Register */
+ RwReg PWM_RNPR; /**< \brief (Pwm Offset: 0x110) Receive Next Pointer Register */
+ RwReg PWM_RNCR; /**< \brief (Pwm Offset: 0x114) Receive Next Counter Register */
+ RwReg PWM_TNPR; /**< \brief (Pwm Offset: 0x118) Transmit Next Pointer Register */
+ RwReg PWM_TNCR; /**< \brief (Pwm Offset: 0x11C) Transmit Next Counter Register */
+ WoReg PWM_PTCR; /**< \brief (Pwm Offset: 0x120) Transfer Control Register */
+ RoReg PWM_PTSR; /**< \brief (Pwm Offset: 0x124) Transfer Status Register */
+ RwReg Reserved6[2];
+ PwmCmp PWM_CMP[8]; /**< \brief (Pwm Offset: 0x130) cmp = 0 .. 7 */
+ RwReg Reserved7[20];
+ PwmCh_num PWM_CH_NUM[4]; /**< \brief (Pwm Offset: 0x200) ch_num = 0 .. 3 */
+} Pwm;
+#endif /* __ASSEMBLY__ */
+/* -------- PWM_CLK : (PWM Offset: 0x00) PWM Clock Register -------- */
+#define PWM_CLK_DIVA_Pos 0
+#define PWM_CLK_DIVA_Msk (0xffu << PWM_CLK_DIVA_Pos) /**< \brief (PWM_CLK) CLKA, CLKB Divide Factor */
+#define PWM_CLK_DIVA(value) ((PWM_CLK_DIVA_Msk & ((value) << PWM_CLK_DIVA_Pos)))
+#define PWM_CLK_PREA_Pos 8
+#define PWM_CLK_PREA_Msk (0xfu << PWM_CLK_PREA_Pos) /**< \brief (PWM_CLK) CLKA, CLKB Source Clock Selection */
+#define PWM_CLK_PREA(value) ((PWM_CLK_PREA_Msk & ((value) << PWM_CLK_PREA_Pos)))
+#define PWM_CLK_DIVB_Pos 16
+#define PWM_CLK_DIVB_Msk (0xffu << PWM_CLK_DIVB_Pos) /**< \brief (PWM_CLK) CLKA, CLKB Divide Factor */
+#define PWM_CLK_DIVB(value) ((PWM_CLK_DIVB_Msk & ((value) << PWM_CLK_DIVB_Pos)))
+#define PWM_CLK_PREB_Pos 24
+#define PWM_CLK_PREB_Msk (0xfu << PWM_CLK_PREB_Pos) /**< \brief (PWM_CLK) CLKA, CLKB Source Clock Selection */
+#define PWM_CLK_PREB(value) ((PWM_CLK_PREB_Msk & ((value) << PWM_CLK_PREB_Pos)))
+/* -------- PWM_ENA : (PWM Offset: 0x04) PWM Enable Register -------- */
+#define PWM_ENA_CHID0 (0x1u << 0) /**< \brief (PWM_ENA) Channel ID */
+#define PWM_ENA_CHID1 (0x1u << 1) /**< \brief (PWM_ENA) Channel ID */
+#define PWM_ENA_CHID2 (0x1u << 2) /**< \brief (PWM_ENA) Channel ID */
+#define PWM_ENA_CHID3 (0x1u << 3) /**< \brief (PWM_ENA) Channel ID */
+/* -------- PWM_DIS : (PWM Offset: 0x08) PWM Disable Register -------- */
+#define PWM_DIS_CHID0 (0x1u << 0) /**< \brief (PWM_DIS) Channel ID */
+#define PWM_DIS_CHID1 (0x1u << 1) /**< \brief (PWM_DIS) Channel ID */
+#define PWM_DIS_CHID2 (0x1u << 2) /**< \brief (PWM_DIS) Channel ID */
+#define PWM_DIS_CHID3 (0x1u << 3) /**< \brief (PWM_DIS) Channel ID */
+/* -------- PWM_SR : (PWM Offset: 0x0C) PWM Status Register -------- */
+#define PWM_SR_CHID0 (0x1u << 0) /**< \brief (PWM_SR) Channel ID */
+#define PWM_SR_CHID1 (0x1u << 1) /**< \brief (PWM_SR) Channel ID */
+#define PWM_SR_CHID2 (0x1u << 2) /**< \brief (PWM_SR) Channel ID */
+#define PWM_SR_CHID3 (0x1u << 3) /**< \brief (PWM_SR) Channel ID */
+/* -------- PWM_IER1 : (PWM Offset: 0x10) PWM Interrupt Enable Register 1 -------- */
+#define PWM_IER1_CHID0 (0x1u << 0) /**< \brief (PWM_IER1) Counter Event on Channel 0 Interrupt Enable */
+#define PWM_IER1_CHID1 (0x1u << 1) /**< \brief (PWM_IER1) Counter Event on Channel 1 Interrupt Enable */
+#define PWM_IER1_CHID2 (0x1u << 2) /**< \brief (PWM_IER1) Counter Event on Channel 2 Interrupt Enable */
+#define PWM_IER1_CHID3 (0x1u << 3) /**< \brief (PWM_IER1) Counter Event on Channel 3 Interrupt Enable */
+#define PWM_IER1_FCHID0 (0x1u << 16) /**< \brief (PWM_IER1) Fault Protection Trigger on Channel 0 Interrupt Enable */
+#define PWM_IER1_FCHID1 (0x1u << 17) /**< \brief (PWM_IER1) Fault Protection Trigger on Channel 1 Interrupt Enable */
+#define PWM_IER1_FCHID2 (0x1u << 18) /**< \brief (PWM_IER1) Fault Protection Trigger on Channel 2 Interrupt Enable */
+#define PWM_IER1_FCHID3 (0x1u << 19) /**< \brief (PWM_IER1) Fault Protection Trigger on Channel 3 Interrupt Enable */
+/* -------- PWM_IDR1 : (PWM Offset: 0x14) PWM Interrupt Disable Register 1 -------- */
+#define PWM_IDR1_CHID0 (0x1u << 0) /**< \brief (PWM_IDR1) Counter Event on Channel 0 Interrupt Disable */
+#define PWM_IDR1_CHID1 (0x1u << 1) /**< \brief (PWM_IDR1) Counter Event on Channel 1 Interrupt Disable */
+#define PWM_IDR1_CHID2 (0x1u << 2) /**< \brief (PWM_IDR1) Counter Event on Channel 2 Interrupt Disable */
+#define PWM_IDR1_CHID3 (0x1u << 3) /**< \brief (PWM_IDR1) Counter Event on Channel 3 Interrupt Disable */
+#define PWM_IDR1_FCHID0 (0x1u << 16) /**< \brief (PWM_IDR1) Fault Protection Trigger on Channel 0 Interrupt Disable */
+#define PWM_IDR1_FCHID1 (0x1u << 17) /**< \brief (PWM_IDR1) Fault Protection Trigger on Channel 1 Interrupt Disable */
+#define PWM_IDR1_FCHID2 (0x1u << 18) /**< \brief (PWM_IDR1) Fault Protection Trigger on Channel 2 Interrupt Disable */
+#define PWM_IDR1_FCHID3 (0x1u << 19) /**< \brief (PWM_IDR1) Fault Protection Trigger on Channel 3 Interrupt Disable */
+/* -------- PWM_IMR1 : (PWM Offset: 0x18) PWM Interrupt Mask Register 1 -------- */
+#define PWM_IMR1_CHID0 (0x1u << 0) /**< \brief (PWM_IMR1) Counter Event on Channel 0 Interrupt Mask */
+#define PWM_IMR1_CHID1 (0x1u << 1) /**< \brief (PWM_IMR1) Counter Event on Channel 1 Interrupt Mask */
+#define PWM_IMR1_CHID2 (0x1u << 2) /**< \brief (PWM_IMR1) Counter Event on Channel 2 Interrupt Mask */
+#define PWM_IMR1_CHID3 (0x1u << 3) /**< \brief (PWM_IMR1) Counter Event on Channel 3 Interrupt Mask */
+#define PWM_IMR1_FCHID0 (0x1u << 16) /**< \brief (PWM_IMR1) Fault Protection Trigger on Channel 0 Interrupt Mask */
+#define PWM_IMR1_FCHID1 (0x1u << 17) /**< \brief (PWM_IMR1) Fault Protection Trigger on Channel 1 Interrupt Mask */
+#define PWM_IMR1_FCHID2 (0x1u << 18) /**< \brief (PWM_IMR1) Fault Protection Trigger on Channel 2 Interrupt Mask */
+#define PWM_IMR1_FCHID3 (0x1u << 19) /**< \brief (PWM_IMR1) Fault Protection Trigger on Channel 3 Interrupt Mask */
+/* -------- PWM_ISR1 : (PWM Offset: 0x1C) PWM Interrupt Status Register 1 -------- */
+#define PWM_ISR1_CHID0 (0x1u << 0) /**< \brief (PWM_ISR1) Counter Event on Channel 0 */
+#define PWM_ISR1_CHID1 (0x1u << 1) /**< \brief (PWM_ISR1) Counter Event on Channel 1 */
+#define PWM_ISR1_CHID2 (0x1u << 2) /**< \brief (PWM_ISR1) Counter Event on Channel 2 */
+#define PWM_ISR1_CHID3 (0x1u << 3) /**< \brief (PWM_ISR1) Counter Event on Channel 3 */
+#define PWM_ISR1_FCHID0 (0x1u << 16) /**< \brief (PWM_ISR1) Fault Protection Trigger on Channel 0 */
+#define PWM_ISR1_FCHID1 (0x1u << 17) /**< \brief (PWM_ISR1) Fault Protection Trigger on Channel 1 */
+#define PWM_ISR1_FCHID2 (0x1u << 18) /**< \brief (PWM_ISR1) Fault Protection Trigger on Channel 2 */
+#define PWM_ISR1_FCHID3 (0x1u << 19) /**< \brief (PWM_ISR1) Fault Protection Trigger on Channel 3 */
+/* -------- PWM_SCM : (PWM Offset: 0x20) PWM Sync Channels Mode Register -------- */
+#define PWM_SCM_SYNC0 (0x1u << 0) /**< \brief (PWM_SCM) Synchronous Channel 0 */
+#define PWM_SCM_SYNC1 (0x1u << 1) /**< \brief (PWM_SCM) Synchronous Channel 1 */
+#define PWM_SCM_SYNC2 (0x1u << 2) /**< \brief (PWM_SCM) Synchronous Channel 2 */
+#define PWM_SCM_SYNC3 (0x1u << 3) /**< \brief (PWM_SCM) Synchronous Channel 3 */
+#define PWM_SCM_UPDM_Pos 16
+#define PWM_SCM_UPDM_Msk (0x3u << PWM_SCM_UPDM_Pos) /**< \brief (PWM_SCM) Synchronous Channels Update Mode */
+#define PWM_SCM_UPDM_MODE0 (0x0u << 16) /**< \brief (PWM_SCM) Manual write of double buffer registers and manual update of synchronous channels. The update occurs at the begin- ning of the next PWM period, when the bit UPDULOCK in "PWM Sync Channels Update Control Register" on page 55 is set. */
+#define PWM_SCM_UPDM_MODE1 (0x1u << 16) /**< \brief (PWM_SCM) Manual write of double buffer registers and automatic update of synchronous channels. The update occurs when the Update Period is elapsed. */
+#define PWM_SCM_UPDM_MODE2 (0x2u << 16) /**< \brief (PWM_SCM) Automatic write of duty-cycle update registers by the PDC and automatic update of synchronous channels. The update occurs when the Update Period is elapsed. */
+#define PWM_SCM_PTRM (0x1u << 20) /**< \brief (PWM_SCM) PDC Transfer Request Mode */
+#define PWM_SCM_PTRCS_Pos 21
+#define PWM_SCM_PTRCS_Msk (0x7u << PWM_SCM_PTRCS_Pos) /**< \brief (PWM_SCM) PDC Transfer Request Comparison Selection */
+#define PWM_SCM_PTRCS(value) ((PWM_SCM_PTRCS_Msk & ((value) << PWM_SCM_PTRCS_Pos)))
+/* -------- PWM_SCUC : (PWM Offset: 0x28) PWM Sync Channels Update Control Register -------- */
+#define PWM_SCUC_UPDULOCK (0x1u << 0) /**< \brief (PWM_SCUC) Synchronous Channels Update Unlock */
+/* -------- PWM_SCUP : (PWM Offset: 0x2C) PWM Sync Channels Update Period Register -------- */
+#define PWM_SCUP_UPR_Pos 0
+#define PWM_SCUP_UPR_Msk (0xfu << PWM_SCUP_UPR_Pos) /**< \brief (PWM_SCUP) Update Period */
+#define PWM_SCUP_UPR(value) ((PWM_SCUP_UPR_Msk & ((value) << PWM_SCUP_UPR_Pos)))
+#define PWM_SCUP_UPRCNT_Pos 4
+#define PWM_SCUP_UPRCNT_Msk (0xfu << PWM_SCUP_UPRCNT_Pos) /**< \brief (PWM_SCUP) Update Period Counter */
+#define PWM_SCUP_UPRCNT(value) ((PWM_SCUP_UPRCNT_Msk & ((value) << PWM_SCUP_UPRCNT_Pos)))
+/* -------- PWM_SCUPUPD : (PWM Offset: 0x30) PWM Sync Channels Update Period Update Register -------- */
+#define PWM_SCUPUPD_UPRUPD_Pos 0
+#define PWM_SCUPUPD_UPRUPD_Msk (0xfu << PWM_SCUPUPD_UPRUPD_Pos) /**< \brief (PWM_SCUPUPD) Update Period Update */
+#define PWM_SCUPUPD_UPRUPD(value) ((PWM_SCUPUPD_UPRUPD_Msk & ((value) << PWM_SCUPUPD_UPRUPD_Pos)))
+/* -------- PWM_IER2 : (PWM Offset: 0x34) PWM Interrupt Enable Register 2 -------- */
+#define PWM_IER2_WRDY (0x1u << 0) /**< \brief (PWM_IER2) Write Ready for Synchronous Channels Update Interrupt Enable */
+#define PWM_IER2_ENDTX (0x1u << 1) /**< \brief (PWM_IER2) PDC End of TX Buffer Interrupt Enable */
+#define PWM_IER2_TXBUFE (0x1u << 2) /**< \brief (PWM_IER2) PDC TX Buffer Empty Interrupt Enable */
+#define PWM_IER2_UNRE (0x1u << 3) /**< \brief (PWM_IER2) Synchronous Channels Update Underrun Error Interrupt Enable */
+#define PWM_IER2_CMPM0 (0x1u << 8) /**< \brief (PWM_IER2) Comparison 0 Match Interrupt Enable */
+#define PWM_IER2_CMPM1 (0x1u << 9) /**< \brief (PWM_IER2) Comparison 1 Match Interrupt Enable */
+#define PWM_IER2_CMPM2 (0x1u << 10) /**< \brief (PWM_IER2) Comparison 2 Match Interrupt Enable */
+#define PWM_IER2_CMPM3 (0x1u << 11) /**< \brief (PWM_IER2) Comparison 3 Match Interrupt Enable */
+#define PWM_IER2_CMPM4 (0x1u << 12) /**< \brief (PWM_IER2) Comparison 4 Match Interrupt Enable */
+#define PWM_IER2_CMPM5 (0x1u << 13) /**< \brief (PWM_IER2) Comparison 5 Match Interrupt Enable */
+#define PWM_IER2_CMPM6 (0x1u << 14) /**< \brief (PWM_IER2) Comparison 6 Match Interrupt Enable */
+#define PWM_IER2_CMPM7 (0x1u << 15) /**< \brief (PWM_IER2) Comparison 7 Match Interrupt Enable */
+#define PWM_IER2_CMPU0 (0x1u << 16) /**< \brief (PWM_IER2) Comparison 0 Update Interrupt Enable */
+#define PWM_IER2_CMPU1 (0x1u << 17) /**< \brief (PWM_IER2) Comparison 1 Update Interrupt Enable */
+#define PWM_IER2_CMPU2 (0x1u << 18) /**< \brief (PWM_IER2) Comparison 2 Update Interrupt Enable */
+#define PWM_IER2_CMPU3 (0x1u << 19) /**< \brief (PWM_IER2) Comparison 3 Update Interrupt Enable */
+#define PWM_IER2_CMPU4 (0x1u << 20) /**< \brief (PWM_IER2) Comparison 4 Update Interrupt Enable */
+#define PWM_IER2_CMPU5 (0x1u << 21) /**< \brief (PWM_IER2) Comparison 5 Update Interrupt Enable */
+#define PWM_IER2_CMPU6 (0x1u << 22) /**< \brief (PWM_IER2) Comparison 6 Update Interrupt Enable */
+#define PWM_IER2_CMPU7 (0x1u << 23) /**< \brief (PWM_IER2) Comparison 7 Update Interrupt Enable */
+/* -------- PWM_IDR2 : (PWM Offset: 0x38) PWM Interrupt Disable Register 2 -------- */
+#define PWM_IDR2_WRDY (0x1u << 0) /**< \brief (PWM_IDR2) Write Ready for Synchronous Channels Update Interrupt Disable */
+#define PWM_IDR2_ENDTX (0x1u << 1) /**< \brief (PWM_IDR2) PDC End of TX Buffer Interrupt Disable */
+#define PWM_IDR2_TXBUFE (0x1u << 2) /**< \brief (PWM_IDR2) PDC TX Buffer Empty Interrupt Disable */
+#define PWM_IDR2_UNRE (0x1u << 3) /**< \brief (PWM_IDR2) Synchronous Channels Update Underrun Error Interrupt Disable */
+#define PWM_IDR2_CMPM0 (0x1u << 8) /**< \brief (PWM_IDR2) Comparison 0 Match Interrupt Disable */
+#define PWM_IDR2_CMPM1 (0x1u << 9) /**< \brief (PWM_IDR2) Comparison 1 Match Interrupt Disable */
+#define PWM_IDR2_CMPM2 (0x1u << 10) /**< \brief (PWM_IDR2) Comparison 2 Match Interrupt Disable */
+#define PWM_IDR2_CMPM3 (0x1u << 11) /**< \brief (PWM_IDR2) Comparison 3 Match Interrupt Disable */
+#define PWM_IDR2_CMPM4 (0x1u << 12) /**< \brief (PWM_IDR2) Comparison 4 Match Interrupt Disable */
+#define PWM_IDR2_CMPM5 (0x1u << 13) /**< \brief (PWM_IDR2) Comparison 5 Match Interrupt Disable */
+#define PWM_IDR2_CMPM6 (0x1u << 14) /**< \brief (PWM_IDR2) Comparison 6 Match Interrupt Disable */
+#define PWM_IDR2_CMPM7 (0x1u << 15) /**< \brief (PWM_IDR2) Comparison 7 Match Interrupt Disable */
+#define PWM_IDR2_CMPU0 (0x1u << 16) /**< \brief (PWM_IDR2) Comparison 0 Update Interrupt Disable */
+#define PWM_IDR2_CMPU1 (0x1u << 17) /**< \brief (PWM_IDR2) Comparison 1 Update Interrupt Disable */
+#define PWM_IDR2_CMPU2 (0x1u << 18) /**< \brief (PWM_IDR2) Comparison 2 Update Interrupt Disable */
+#define PWM_IDR2_CMPU3 (0x1u << 19) /**< \brief (PWM_IDR2) Comparison 3 Update Interrupt Disable */
+#define PWM_IDR2_CMPU4 (0x1u << 20) /**< \brief (PWM_IDR2) Comparison 4 Update Interrupt Disable */
+#define PWM_IDR2_CMPU5 (0x1u << 21) /**< \brief (PWM_IDR2) Comparison 5 Update Interrupt Disable */
+#define PWM_IDR2_CMPU6 (0x1u << 22) /**< \brief (PWM_IDR2) Comparison 6 Update Interrupt Disable */
+#define PWM_IDR2_CMPU7 (0x1u << 23) /**< \brief (PWM_IDR2) Comparison 7 Update Interrupt Disable */
+/* -------- PWM_IMR2 : (PWM Offset: 0x3C) PWM Interrupt Mask Register 2 -------- */
+#define PWM_IMR2_WRDY (0x1u << 0) /**< \brief (PWM_IMR2) Write Ready for Synchronous Channels Update Interrupt Mask */
+#define PWM_IMR2_ENDTX (0x1u << 1) /**< \brief (PWM_IMR2) PDC End of TX Buffer Interrupt Mask */
+#define PWM_IMR2_TXBUFE (0x1u << 2) /**< \brief (PWM_IMR2) PDC TX Buffer Empty Interrupt Mask */
+#define PWM_IMR2_UNRE (0x1u << 3) /**< \brief (PWM_IMR2) Synchronous Channels Update Underrun Error Interrupt Mask */
+#define PWM_IMR2_CMPM0 (0x1u << 8) /**< \brief (PWM_IMR2) Comparison 0 Match Interrupt Mask */
+#define PWM_IMR2_CMPM1 (0x1u << 9) /**< \brief (PWM_IMR2) Comparison 1 Match Interrupt Mask */
+#define PWM_IMR2_CMPM2 (0x1u << 10) /**< \brief (PWM_IMR2) Comparison 2 Match Interrupt Mask */
+#define PWM_IMR2_CMPM3 (0x1u << 11) /**< \brief (PWM_IMR2) Comparison 3 Match Interrupt Mask */
+#define PWM_IMR2_CMPM4 (0x1u << 12) /**< \brief (PWM_IMR2) Comparison 4 Match Interrupt Mask */
+#define PWM_IMR2_CMPM5 (0x1u << 13) /**< \brief (PWM_IMR2) Comparison 5 Match Interrupt Mask */
+#define PWM_IMR2_CMPM6 (0x1u << 14) /**< \brief (PWM_IMR2) Comparison 6 Match Interrupt Mask */
+#define PWM_IMR2_CMPM7 (0x1u << 15) /**< \brief (PWM_IMR2) Comparison 7 Match Interrupt Mask */
+#define PWM_IMR2_CMPU0 (0x1u << 16) /**< \brief (PWM_IMR2) Comparison 0 Update Interrupt Mask */
+#define PWM_IMR2_CMPU1 (0x1u << 17) /**< \brief (PWM_IMR2) Comparison 1 Update Interrupt Mask */
+#define PWM_IMR2_CMPU2 (0x1u << 18) /**< \brief (PWM_IMR2) Comparison 2 Update Interrupt Mask */
+#define PWM_IMR2_CMPU3 (0x1u << 19) /**< \brief (PWM_IMR2) Comparison 3 Update Interrupt Mask */
+#define PWM_IMR2_CMPU4 (0x1u << 20) /**< \brief (PWM_IMR2) Comparison 4 Update Interrupt Mask */
+#define PWM_IMR2_CMPU5 (0x1u << 21) /**< \brief (PWM_IMR2) Comparison 5 Update Interrupt Mask */
+#define PWM_IMR2_CMPU6 (0x1u << 22) /**< \brief (PWM_IMR2) Comparison 6 Update Interrupt Mask */
+#define PWM_IMR2_CMPU7 (0x1u << 23) /**< \brief (PWM_IMR2) Comparison 7 Update Interrupt Mask */
+/* -------- PWM_ISR2 : (PWM Offset: 0x40) PWM Interrupt Status Register 2 -------- */
+#define PWM_ISR2_WRDY (0x1u << 0) /**< \brief (PWM_ISR2) Write Ready for Synchronous Channels Update */
+#define PWM_ISR2_ENDTX (0x1u << 1) /**< \brief (PWM_ISR2) PDC End of TX Buffer */
+#define PWM_ISR2_TXBUFE (0x1u << 2) /**< \brief (PWM_ISR2) PDC TX Buffer Empty */
+#define PWM_ISR2_UNRE (0x1u << 3) /**< \brief (PWM_ISR2) Synchronous Channels Update Underrun Error */
+#define PWM_ISR2_CMPM0 (0x1u << 8) /**< \brief (PWM_ISR2) Comparison 0 Match */
+#define PWM_ISR2_CMPM1 (0x1u << 9) /**< \brief (PWM_ISR2) Comparison 1 Match */
+#define PWM_ISR2_CMPM2 (0x1u << 10) /**< \brief (PWM_ISR2) Comparison 2 Match */
+#define PWM_ISR2_CMPM3 (0x1u << 11) /**< \brief (PWM_ISR2) Comparison 3 Match */
+#define PWM_ISR2_CMPM4 (0x1u << 12) /**< \brief (PWM_ISR2) Comparison 4 Match */
+#define PWM_ISR2_CMPM5 (0x1u << 13) /**< \brief (PWM_ISR2) Comparison 5 Match */
+#define PWM_ISR2_CMPM6 (0x1u << 14) /**< \brief (PWM_ISR2) Comparison 6 Match */
+#define PWM_ISR2_CMPM7 (0x1u << 15) /**< \brief (PWM_ISR2) Comparison 7 Match */
+#define PWM_ISR2_CMPU0 (0x1u << 16) /**< \brief (PWM_ISR2) Comparison 0 Update */
+#define PWM_ISR2_CMPU1 (0x1u << 17) /**< \brief (PWM_ISR2) Comparison 1 Update */
+#define PWM_ISR2_CMPU2 (0x1u << 18) /**< \brief (PWM_ISR2) Comparison 2 Update */
+#define PWM_ISR2_CMPU3 (0x1u << 19) /**< \brief (PWM_ISR2) Comparison 3 Update */
+#define PWM_ISR2_CMPU4 (0x1u << 20) /**< \brief (PWM_ISR2) Comparison 4 Update */
+#define PWM_ISR2_CMPU5 (0x1u << 21) /**< \brief (PWM_ISR2) Comparison 5 Update */
+#define PWM_ISR2_CMPU6 (0x1u << 22) /**< \brief (PWM_ISR2) Comparison 6 Update */
+#define PWM_ISR2_CMPU7 (0x1u << 23) /**< \brief (PWM_ISR2) Comparison 7 Update */
+/* -------- PWM_OOV : (PWM Offset: 0x44) PWM Output Override Value Register -------- */
+#define PWM_OOV_OOVH0 (0x1u << 0) /**< \brief (PWM_OOV) Output Override Value for PWMH output of the channel 0 */
+#define PWM_OOV_OOVH1 (0x1u << 1) /**< \brief (PWM_OOV) Output Override Value for PWMH output of the channel 1 */
+#define PWM_OOV_OOVH2 (0x1u << 2) /**< \brief (PWM_OOV) Output Override Value for PWMH output of the channel 2 */
+#define PWM_OOV_OOVH3 (0x1u << 3) /**< \brief (PWM_OOV) Output Override Value for PWMH output of the channel 3 */
+#define PWM_OOV_OOVL0 (0x1u << 16) /**< \brief (PWM_OOV) Output Override Value for PWML output of the channel 0 */
+#define PWM_OOV_OOVL1 (0x1u << 17) /**< \brief (PWM_OOV) Output Override Value for PWML output of the channel 1 */
+#define PWM_OOV_OOVL2 (0x1u << 18) /**< \brief (PWM_OOV) Output Override Value for PWML output of the channel 2 */
+#define PWM_OOV_OOVL3 (0x1u << 19) /**< \brief (PWM_OOV) Output Override Value for PWML output of the channel 3 */
+/* -------- PWM_OS : (PWM Offset: 0x48) PWM Output Selection Register -------- */
+#define PWM_OS_OSH0 (0x1u << 0) /**< \brief (PWM_OS) Output Selection for PWMH output of the channel 0 */
+#define PWM_OS_OSH1 (0x1u << 1) /**< \brief (PWM_OS) Output Selection for PWMH output of the channel 1 */
+#define PWM_OS_OSH2 (0x1u << 2) /**< \brief (PWM_OS) Output Selection for PWMH output of the channel 2 */
+#define PWM_OS_OSH3 (0x1u << 3) /**< \brief (PWM_OS) Output Selection for PWMH output of the channel 3 */
+#define PWM_OS_OSL0 (0x1u << 16) /**< \brief (PWM_OS) Output Selection for PWML output of the channel 0 */
+#define PWM_OS_OSL1 (0x1u << 17) /**< \brief (PWM_OS) Output Selection for PWML output of the channel 1 */
+#define PWM_OS_OSL2 (0x1u << 18) /**< \brief (PWM_OS) Output Selection for PWML output of the channel 2 */
+#define PWM_OS_OSL3 (0x1u << 19) /**< \brief (PWM_OS) Output Selection for PWML output of the channel 3 */
+/* -------- PWM_OSS : (PWM Offset: 0x4C) PWM Output Selection Set Register -------- */
+#define PWM_OSS_OSSH0 (0x1u << 0) /**< \brief (PWM_OSS) Output Selection Set for PWMH output of the channel 0 */
+#define PWM_OSS_OSSH1 (0x1u << 1) /**< \brief (PWM_OSS) Output Selection Set for PWMH output of the channel 1 */
+#define PWM_OSS_OSSH2 (0x1u << 2) /**< \brief (PWM_OSS) Output Selection Set for PWMH output of the channel 2 */
+#define PWM_OSS_OSSH3 (0x1u << 3) /**< \brief (PWM_OSS) Output Selection Set for PWMH output of the channel 3 */
+#define PWM_OSS_OSSL0 (0x1u << 16) /**< \brief (PWM_OSS) Output Selection Set for PWML output of the channel 0 */
+#define PWM_OSS_OSSL1 (0x1u << 17) /**< \brief (PWM_OSS) Output Selection Set for PWML output of the channel 1 */
+#define PWM_OSS_OSSL2 (0x1u << 18) /**< \brief (PWM_OSS) Output Selection Set for PWML output of the channel 2 */
+#define PWM_OSS_OSSL3 (0x1u << 19) /**< \brief (PWM_OSS) Output Selection Set for PWML output of the channel 3 */
+/* -------- PWM_OSC : (PWM Offset: 0x50) PWM Output Selection Clear Register -------- */
+#define PWM_OSC_OSCH0 (0x1u << 0) /**< \brief (PWM_OSC) Output Selection Clear for PWMH output of the channel 0 */
+#define PWM_OSC_OSCH1 (0x1u << 1) /**< \brief (PWM_OSC) Output Selection Clear for PWMH output of the channel 1 */
+#define PWM_OSC_OSCH2 (0x1u << 2) /**< \brief (PWM_OSC) Output Selection Clear for PWMH output of the channel 2 */
+#define PWM_OSC_OSCH3 (0x1u << 3) /**< \brief (PWM_OSC) Output Selection Clear for PWMH output of the channel 3 */
+#define PWM_OSC_OSCL0 (0x1u << 16) /**< \brief (PWM_OSC) Output Selection Clear for PWML output of the channel 0 */
+#define PWM_OSC_OSCL1 (0x1u << 17) /**< \brief (PWM_OSC) Output Selection Clear for PWML output of the channel 1 */
+#define PWM_OSC_OSCL2 (0x1u << 18) /**< \brief (PWM_OSC) Output Selection Clear for PWML output of the channel 2 */
+#define PWM_OSC_OSCL3 (0x1u << 19) /**< \brief (PWM_OSC) Output Selection Clear for PWML output of the channel 3 */
+/* -------- PWM_OSSUPD : (PWM Offset: 0x54) PWM Output Selection Set Update Register -------- */
+#define PWM_OSSUPD_OSSUPH0 (0x1u << 0) /**< \brief (PWM_OSSUPD) Output Selection Set for PWMH output of the channel 0 */
+#define PWM_OSSUPD_OSSUPH1 (0x1u << 1) /**< \brief (PWM_OSSUPD) Output Selection Set for PWMH output of the channel 1 */
+#define PWM_OSSUPD_OSSUPH2 (0x1u << 2) /**< \brief (PWM_OSSUPD) Output Selection Set for PWMH output of the channel 2 */
+#define PWM_OSSUPD_OSSUPH3 (0x1u << 3) /**< \brief (PWM_OSSUPD) Output Selection Set for PWMH output of the channel 3 */
+#define PWM_OSSUPD_OSSUPL0 (0x1u << 16) /**< \brief (PWM_OSSUPD) Output Selection Set for PWML output of the channel 0 */
+#define PWM_OSSUPD_OSSUPL1 (0x1u << 17) /**< \brief (PWM_OSSUPD) Output Selection Set for PWML output of the channel 1 */
+#define PWM_OSSUPD_OSSUPL2 (0x1u << 18) /**< \brief (PWM_OSSUPD) Output Selection Set for PWML output of the channel 2 */
+#define PWM_OSSUPD_OSSUPL3 (0x1u << 19) /**< \brief (PWM_OSSUPD) Output Selection Set for PWML output of the channel 3 */
+/* -------- PWM_OSCUPD : (PWM Offset: 0x58) PWM Output Selection Clear Update Register -------- */
+#define PWM_OSCUPD_OSCUPH0 (0x1u << 0) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWMH output of the channel 0 */
+#define PWM_OSCUPD_OSCUPH1 (0x1u << 1) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWMH output of the channel 1 */
+#define PWM_OSCUPD_OSCUPH2 (0x1u << 2) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWMH output of the channel 2 */
+#define PWM_OSCUPD_OSCUPH3 (0x1u << 3) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWMH output of the channel 3 */
+#define PWM_OSCUPD_OSCUPL0 (0x1u << 16) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWML output of the channel 0 */
+#define PWM_OSCUPD_OSCUPL1 (0x1u << 17) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWML output of the channel 1 */
+#define PWM_OSCUPD_OSCUPL2 (0x1u << 18) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWML output of the channel 2 */
+#define PWM_OSCUPD_OSCUPL3 (0x1u << 19) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWML output of the channel 3 */
+/* -------- PWM_FMR : (PWM Offset: 0x5C) PWM Fault Mode Register -------- */
+#define PWM_FMR_FPOL_Pos 0
+#define PWM_FMR_FPOL_Msk (0xffu << PWM_FMR_FPOL_Pos) /**< \brief (PWM_FMR) Fault Polarity (fault input bit varies from 0 to 5) */
+#define PWM_FMR_FPOL(value) ((PWM_FMR_FPOL_Msk & ((value) << PWM_FMR_FPOL_Pos)))
+#define PWM_FMR_FMOD_Pos 8
+#define PWM_FMR_FMOD_Msk (0xffu << PWM_FMR_FMOD_Pos) /**< \brief (PWM_FMR) Fault Activation Mode (fault input bit varies from 0 to 5) */
+#define PWM_FMR_FMOD(value) ((PWM_FMR_FMOD_Msk & ((value) << PWM_FMR_FMOD_Pos)))
+#define PWM_FMR_FFIL_Pos 16
+#define PWM_FMR_FFIL_Msk (0xffu << PWM_FMR_FFIL_Pos) /**< \brief (PWM_FMR) Fault Filtering (fault input bit varies from 0 to 5) */
+#define PWM_FMR_FFIL(value) ((PWM_FMR_FFIL_Msk & ((value) << PWM_FMR_FFIL_Pos)))
+/* -------- PWM_FSR : (PWM Offset: 0x60) PWM Fault Status Register -------- */
+#define PWM_FSR_FIV_Pos 0
+#define PWM_FSR_FIV_Msk (0xffu << PWM_FSR_FIV_Pos) /**< \brief (PWM_FSR) Fault Input Value (fault input bit varies from 0 to 5) */
+#define PWM_FSR_FS_Pos 8
+#define PWM_FSR_FS_Msk (0xffu << PWM_FSR_FS_Pos) /**< \brief (PWM_FSR) Fault Status (fault input bit varies from 0 to 5) */
+/* -------- PWM_FCR : (PWM Offset: 0x64) PWM Fault Clear Register -------- */
+#define PWM_FCR_FCLR_Pos 0
+#define PWM_FCR_FCLR_Msk (0xffu << PWM_FCR_FCLR_Pos) /**< \brief (PWM_FCR) Fault Clear (fault input bit varies from 0 to 5) */
+#define PWM_FCR_FCLR(value) ((PWM_FCR_FCLR_Msk & ((value) << PWM_FCR_FCLR_Pos)))
+/* -------- PWM_FPV : (PWM Offset: 0x68) PWM Fault Protection Value Register -------- */
+#define PWM_FPV_FPVH0 (0x1u << 0) /**< \brief (PWM_FPV) Fault Protection Value for PWMH output on channel 0 */
+#define PWM_FPV_FPVH1 (0x1u << 1) /**< \brief (PWM_FPV) Fault Protection Value for PWMH output on channel 1 */
+#define PWM_FPV_FPVH2 (0x1u << 2) /**< \brief (PWM_FPV) Fault Protection Value for PWMH output on channel 2 */
+#define PWM_FPV_FPVH3 (0x1u << 3) /**< \brief (PWM_FPV) Fault Protection Value for PWMH output on channel 3 */
+#define PWM_FPV_FPVL0 (0x1u << 16) /**< \brief (PWM_FPV) Fault Protection Value for PWML output on channel 0 */
+#define PWM_FPV_FPVL1 (0x1u << 17) /**< \brief (PWM_FPV) Fault Protection Value for PWML output on channel 1 */
+#define PWM_FPV_FPVL2 (0x1u << 18) /**< \brief (PWM_FPV) Fault Protection Value for PWML output on channel 2 */
+#define PWM_FPV_FPVL3 (0x1u << 19) /**< \brief (PWM_FPV) Fault Protection Value for PWML output on channel 3 */
+/* -------- PWM_FPE : (PWM Offset: 0x6C) PWM Fault Protection Enable Register -------- */
+#define PWM_FPE_FPE0_Pos 0
+#define PWM_FPE_FPE0_Msk (0xffu << PWM_FPE_FPE0_Pos) /**< \brief (PWM_FPE) Fault Protection Enable for channel 0 (fault input bit varies from 0 to 5) */
+#define PWM_FPE_FPE0(value) ((PWM_FPE_FPE0_Msk & ((value) << PWM_FPE_FPE0_Pos)))
+#define PWM_FPE_FPE1_Pos 8
+#define PWM_FPE_FPE1_Msk (0xffu << PWM_FPE_FPE1_Pos) /**< \brief (PWM_FPE) Fault Protection Enable for channel 1 (fault input bit varies from 0 to 5) */
+#define PWM_FPE_FPE1(value) ((PWM_FPE_FPE1_Msk & ((value) << PWM_FPE_FPE1_Pos)))
+#define PWM_FPE_FPE2_Pos 16
+#define PWM_FPE_FPE2_Msk (0xffu << PWM_FPE_FPE2_Pos) /**< \brief (PWM_FPE) Fault Protection Enable for channel 2 (fault input bit varies from 0 to 5) */
+#define PWM_FPE_FPE2(value) ((PWM_FPE_FPE2_Msk & ((value) << PWM_FPE_FPE2_Pos)))
+#define PWM_FPE_FPE3_Pos 24
+#define PWM_FPE_FPE3_Msk (0xffu << PWM_FPE_FPE3_Pos) /**< \brief (PWM_FPE) Fault Protection Enable for channel 3 (fault input bit varies from 0 to 5) */
+#define PWM_FPE_FPE3(value) ((PWM_FPE_FPE3_Msk & ((value) << PWM_FPE_FPE3_Pos)))
+/* -------- PWM_EL0MR : (PWM Offset: 0x7C) PWM Event Line 0 Mode Register -------- */
+#define PWM_EL0MR_CSEL0 (0x1u << 0) /**< \brief (PWM_EL0MR) Comparison 0 Selection */
+#define PWM_EL0MR_CSEL1 (0x1u << 1) /**< \brief (PWM_EL0MR) Comparison 1 Selection */
+#define PWM_EL0MR_CSEL2 (0x1u << 2) /**< \brief (PWM_EL0MR) Comparison 2 Selection */
+#define PWM_EL0MR_CSEL3 (0x1u << 3) /**< \brief (PWM_EL0MR) Comparison 3 Selection */
+#define PWM_EL0MR_CSEL4 (0x1u << 4) /**< \brief (PWM_EL0MR) Comparison 4 Selection */
+#define PWM_EL0MR_CSEL5 (0x1u << 5) /**< \brief (PWM_EL0MR) Comparison 5 Selection */
+#define PWM_EL0MR_CSEL6 (0x1u << 6) /**< \brief (PWM_EL0MR) Comparison 6 Selection */
+#define PWM_EL0MR_CSEL7 (0x1u << 7) /**< \brief (PWM_EL0MR) Comparison 7 Selection */
+/* -------- PWM_EL1MR : (PWM Offset: 0x80) PWM Event Line 1 Mode Register -------- */
+#define PWM_EL1MR_CSEL0 (0x1u << 0) /**< \brief (PWM_EL1MR) Comparison 0 Selection */
+#define PWM_EL1MR_CSEL1 (0x1u << 1) /**< \brief (PWM_EL1MR) Comparison 1 Selection */
+#define PWM_EL1MR_CSEL2 (0x1u << 2) /**< \brief (PWM_EL1MR) Comparison 2 Selection */
+#define PWM_EL1MR_CSEL3 (0x1u << 3) /**< \brief (PWM_EL1MR) Comparison 3 Selection */
+#define PWM_EL1MR_CSEL4 (0x1u << 4) /**< \brief (PWM_EL1MR) Comparison 4 Selection */
+#define PWM_EL1MR_CSEL5 (0x1u << 5) /**< \brief (PWM_EL1MR) Comparison 5 Selection */
+#define PWM_EL1MR_CSEL6 (0x1u << 6) /**< \brief (PWM_EL1MR) Comparison 6 Selection */
+#define PWM_EL1MR_CSEL7 (0x1u << 7) /**< \brief (PWM_EL1MR) Comparison 7 Selection */
+/* -------- PWM_SMMR : (PWM Offset: 0xB0) PWM Stepper Motor Mode Register -------- */
+#define PWM_SMMR_GCEN0 (0x1u << 0) /**< \brief (PWM_SMMR) Gray Count ENable */
+#define PWM_SMMR_GCEN1 (0x1u << 1) /**< \brief (PWM_SMMR) Gray Count ENable */
+#define PWM_SMMR_DOWN0 (0x1u << 16) /**< \brief (PWM_SMMR) DOWN Count */
+#define PWM_SMMR_DOWN1 (0x1u << 17) /**< \brief (PWM_SMMR) DOWN Count */
+/* -------- PWM_WPCR : (PWM Offset: 0xE4) PWM Write Protect Control Register -------- */
+#define PWM_WPCR_WPCMD_Pos 0
+#define PWM_WPCR_WPCMD_Msk (0x3u << PWM_WPCR_WPCMD_Pos) /**< \brief (PWM_WPCR) Write Protect Command */
+#define PWM_WPCR_WPCMD(value) ((PWM_WPCR_WPCMD_Msk & ((value) << PWM_WPCR_WPCMD_Pos)))
+#define PWM_WPCR_WPRG0 (0x1u << 2) /**< \brief (PWM_WPCR) Write Protect Register Group 0 */
+#define PWM_WPCR_WPRG1 (0x1u << 3) /**< \brief (PWM_WPCR) Write Protect Register Group 1 */
+#define PWM_WPCR_WPRG2 (0x1u << 4) /**< \brief (PWM_WPCR) Write Protect Register Group 2 */
+#define PWM_WPCR_WPRG3 (0x1u << 5) /**< \brief (PWM_WPCR) Write Protect Register Group 3 */
+#define PWM_WPCR_WPRG4 (0x1u << 6) /**< \brief (PWM_WPCR) Write Protect Register Group 4 */
+#define PWM_WPCR_WPRG5 (0x1u << 7) /**< \brief (PWM_WPCR) Write Protect Register Group 5 */
+#define PWM_WPCR_WPKEY_Pos 8
+#define PWM_WPCR_WPKEY_Msk (0xffffffu << PWM_WPCR_WPKEY_Pos) /**< \brief (PWM_WPCR) Write Protect Key */
+#define PWM_WPCR_WPKEY(value) ((PWM_WPCR_WPKEY_Msk & ((value) << PWM_WPCR_WPKEY_Pos)))
+/* -------- PWM_WPSR : (PWM Offset: 0xE8) PWM Write Protect Status Register -------- */
+#define PWM_WPSR_WPSWS0 (0x1u << 0) /**< \brief (PWM_WPSR) Write Protect SW Status */
+#define PWM_WPSR_WPSWS1 (0x1u << 1) /**< \brief (PWM_WPSR) Write Protect SW Status */
+#define PWM_WPSR_WPSWS2 (0x1u << 2) /**< \brief (PWM_WPSR) Write Protect SW Status */
+#define PWM_WPSR_WPSWS3 (0x1u << 3) /**< \brief (PWM_WPSR) Write Protect SW Status */
+#define PWM_WPSR_WPSWS4 (0x1u << 4) /**< \brief (PWM_WPSR) Write Protect SW Status */
+#define PWM_WPSR_WPSWS5 (0x1u << 5) /**< \brief (PWM_WPSR) Write Protect SW Status */
+#define PWM_WPSR_WPVS (0x1u << 7) /**< \brief (PWM_WPSR) Write Protect Violation Status */
+#define PWM_WPSR_WPHWS0 (0x1u << 8) /**< \brief (PWM_WPSR) Write Protect HW Status */
+#define PWM_WPSR_WPHWS1 (0x1u << 9) /**< \brief (PWM_WPSR) Write Protect HW Status */
+#define PWM_WPSR_WPHWS2 (0x1u << 10) /**< \brief (PWM_WPSR) Write Protect HW Status */
+#define PWM_WPSR_WPHWS3 (0x1u << 11) /**< \brief (PWM_WPSR) Write Protect HW Status */
+#define PWM_WPSR_WPHWS4 (0x1u << 12) /**< \brief (PWM_WPSR) Write Protect HW Status */
+#define PWM_WPSR_WPHWS5 (0x1u << 13) /**< \brief (PWM_WPSR) Write Protect HW Status */
+#define PWM_WPSR_WPVSRC_Pos 16
+#define PWM_WPSR_WPVSRC_Msk (0xffffu << PWM_WPSR_WPVSRC_Pos) /**< \brief (PWM_WPSR) Write Protect Violation Source */
+/* -------- PWM_RPR : (PWM Offset: 0x100) Receive Pointer Register -------- */
+#define PWM_RPR_RXPTR_Pos 0
+#define PWM_RPR_RXPTR_Msk (0xffffffffu << PWM_RPR_RXPTR_Pos) /**< \brief (PWM_RPR) Receive Pointer Register */
+#define PWM_RPR_RXPTR(value) ((PWM_RPR_RXPTR_Msk & ((value) << PWM_RPR_RXPTR_Pos)))
+/* -------- PWM_RCR : (PWM Offset: 0x104) Receive Counter Register -------- */
+#define PWM_RCR_RXCTR_Pos 0
+#define PWM_RCR_RXCTR_Msk (0xffffu << PWM_RCR_RXCTR_Pos) /**< \brief (PWM_RCR) Receive Counter Register */
+#define PWM_RCR_RXCTR(value) ((PWM_RCR_RXCTR_Msk & ((value) << PWM_RCR_RXCTR_Pos)))
+/* -------- PWM_TPR : (PWM Offset: 0x108) Transmit Pointer Register -------- */
+#define PWM_TPR_TXPTR_Pos 0
+#define PWM_TPR_TXPTR_Msk (0xffffffffu << PWM_TPR_TXPTR_Pos) /**< \brief (PWM_TPR) Transmit Counter Register */
+#define PWM_TPR_TXPTR(value) ((PWM_TPR_TXPTR_Msk & ((value) << PWM_TPR_TXPTR_Pos)))
+/* -------- PWM_TCR : (PWM Offset: 0x10C) Transmit Counter Register -------- */
+#define PWM_TCR_TXCTR_Pos 0
+#define PWM_TCR_TXCTR_Msk (0xffffu << PWM_TCR_TXCTR_Pos) /**< \brief (PWM_TCR) Transmit Counter Register */
+#define PWM_TCR_TXCTR(value) ((PWM_TCR_TXCTR_Msk & ((value) << PWM_TCR_TXCTR_Pos)))
+/* -------- PWM_RNPR : (PWM Offset: 0x110) Receive Next Pointer Register -------- */
+#define PWM_RNPR_RXNPTR_Pos 0
+#define PWM_RNPR_RXNPTR_Msk (0xffffffffu << PWM_RNPR_RXNPTR_Pos) /**< \brief (PWM_RNPR) Receive Next Pointer */
+#define PWM_RNPR_RXNPTR(value) ((PWM_RNPR_RXNPTR_Msk & ((value) << PWM_RNPR_RXNPTR_Pos)))
+/* -------- PWM_RNCR : (PWM Offset: 0x114) Receive Next Counter Register -------- */
+#define PWM_RNCR_RXNCTR_Pos 0
+#define PWM_RNCR_RXNCTR_Msk (0xffffu << PWM_RNCR_RXNCTR_Pos) /**< \brief (PWM_RNCR) Receive Next Counter */
+#define PWM_RNCR_RXNCTR(value) ((PWM_RNCR_RXNCTR_Msk & ((value) << PWM_RNCR_RXNCTR_Pos)))
+/* -------- PWM_TNPR : (PWM Offset: 0x118) Transmit Next Pointer Register -------- */
+#define PWM_TNPR_TXNPTR_Pos 0
+#define PWM_TNPR_TXNPTR_Msk (0xffffffffu << PWM_TNPR_TXNPTR_Pos) /**< \brief (PWM_TNPR) Transmit Next Pointer */
+#define PWM_TNPR_TXNPTR(value) ((PWM_TNPR_TXNPTR_Msk & ((value) << PWM_TNPR_TXNPTR_Pos)))
+/* -------- PWM_TNCR : (PWM Offset: 0x11C) Transmit Next Counter Register -------- */
+#define PWM_TNCR_TXNCTR_Pos 0
+#define PWM_TNCR_TXNCTR_Msk (0xffffu << PWM_TNCR_TXNCTR_Pos) /**< \brief (PWM_TNCR) Transmit Counter Next */
+#define PWM_TNCR_TXNCTR(value) ((PWM_TNCR_TXNCTR_Msk & ((value) << PWM_TNCR_TXNCTR_Pos)))
+/* -------- PWM_PTCR : (PWM Offset: 0x120) Transfer Control Register -------- */
+#define PWM_PTCR_RXTEN (0x1u << 0) /**< \brief (PWM_PTCR) Receiver Transfer Enable */
+#define PWM_PTCR_RXTDIS (0x1u << 1) /**< \brief (PWM_PTCR) Receiver Transfer Disable */
+#define PWM_PTCR_TXTEN (0x1u << 8) /**< \brief (PWM_PTCR) Transmitter Transfer Enable */
+#define PWM_PTCR_TXTDIS (0x1u << 9) /**< \brief (PWM_PTCR) Transmitter Transfer Disable */
+/* -------- PWM_PTSR : (PWM Offset: 0x124) Transfer Status Register -------- */
+#define PWM_PTSR_RXTEN (0x1u << 0) /**< \brief (PWM_PTSR) Receiver Transfer Enable */
+#define PWM_PTSR_TXTEN (0x1u << 8) /**< \brief (PWM_PTSR) Transmitter Transfer Enable */
+/* -------- PWM_CMPxV : (PWM Offset: N/A) PWM Comparison 0 Value Register -------- */
+#define PWM_CMPxV_CV_Pos 0
+#define PWM_CMPxV_CV_Msk (0xffffffu << PWM_CMPxV_CV_Pos) /**< \brief (PWM_CMPxV) Comparison x Value */
+#define PWM_CMPxV_CV(value) ((PWM_CMPxV_CV_Msk & ((value) << PWM_CMPxV_CV_Pos)))
+#define PWM_CMPxV_CVM (0x1u << 24) /**< \brief (PWM_CMPxV) Comparison x Value Mode */
+/* -------- PWM_CMPxVUPD : (PWM Offset: N/A) PWM Comparison 0 Value Update Register -------- */
+#define PWM_CMPxVUPD_CVUPD_Pos 0
+#define PWM_CMPxVUPD_CVUPD_Msk (0xffffffu << PWM_CMPxVUPD_CVUPD_Pos) /**< \brief (PWM_CMPxVUPD) Comparison x Value Update */
+#define PWM_CMPxVUPD_CVUPD(value) ((PWM_CMPxVUPD_CVUPD_Msk & ((value) << PWM_CMPxVUPD_CVUPD_Pos)))
+#define PWM_CMPxVUPD_CVMUPD (0x1u << 24) /**< \brief (PWM_CMPxVUPD) Comparison x Value Mode Update */
+/* -------- PWM_CMPxM : (PWM Offset: N/A) PWM Comparison 0 Mode Register -------- */
+#define PWM_CMPxM_CEN (0x1u << 0) /**< \brief (PWM_CMPxM) Comparison x Enable */
+#define PWM_CMPxM_CTR_Pos 4
+#define PWM_CMPxM_CTR_Msk (0xfu << PWM_CMPxM_CTR_Pos) /**< \brief (PWM_CMPxM) Comparison x Trigger */
+#define PWM_CMPxM_CTR(value) ((PWM_CMPxM_CTR_Msk & ((value) << PWM_CMPxM_CTR_Pos)))
+#define PWM_CMPxM_CPR_Pos 8
+#define PWM_CMPxM_CPR_Msk (0xfu << PWM_CMPxM_CPR_Pos) /**< \brief (PWM_CMPxM) Comparison x Period */
+#define PWM_CMPxM_CPR(value) ((PWM_CMPxM_CPR_Msk & ((value) << PWM_CMPxM_CPR_Pos)))
+#define PWM_CMPxM_CPRCNT_Pos 12
+#define PWM_CMPxM_CPRCNT_Msk (0xfu << PWM_CMPxM_CPRCNT_Pos) /**< \brief (PWM_CMPxM) Comparison x Period Counter */
+#define PWM_CMPxM_CPRCNT(value) ((PWM_CMPxM_CPRCNT_Msk & ((value) << PWM_CMPxM_CPRCNT_Pos)))
+#define PWM_CMPxM_CUPR_Pos 16
+#define PWM_CMPxM_CUPR_Msk (0xfu << PWM_CMPxM_CUPR_Pos) /**< \brief (PWM_CMPxM) Comparison x Update Period */
+#define PWM_CMPxM_CUPR(value) ((PWM_CMPxM_CUPR_Msk & ((value) << PWM_CMPxM_CUPR_Pos)))
+#define PWM_CMPxM_CUPRCNT_Pos 20
+#define PWM_CMPxM_CUPRCNT_Msk (0xfu << PWM_CMPxM_CUPRCNT_Pos) /**< \brief (PWM_CMPxM) Comparison x Update Period Counter */
+#define PWM_CMPxM_CUPRCNT(value) ((PWM_CMPxM_CUPRCNT_Msk & ((value) << PWM_CMPxM_CUPRCNT_Pos)))
+/* -------- PWM_CMPxMUPD : (PWM Offset: N/A) PWM Comparison 0 Mode Update Register -------- */
+#define PWM_CMPxMUPD_CENUPD (0x1u << 0) /**< \brief (PWM_CMPxMUPD) Comparison x Enable Update */
+#define PWM_CMPxMUPD_CTRUPD_Pos 4
+#define PWM_CMPxMUPD_CTRUPD_Msk (0xfu << PWM_CMPxMUPD_CTRUPD_Pos) /**< \brief (PWM_CMPxMUPD) Comparison x Trigger Update */
+#define PWM_CMPxMUPD_CTRUPD(value) ((PWM_CMPxMUPD_CTRUPD_Msk & ((value) << PWM_CMPxMUPD_CTRUPD_Pos)))
+#define PWM_CMPxMUPD_CPRUPD_Pos 8
+#define PWM_CMPxMUPD_CPRUPD_Msk (0xfu << PWM_CMPxMUPD_CPRUPD_Pos) /**< \brief (PWM_CMPxMUPD) Comparison x Period Update */
+#define PWM_CMPxMUPD_CPRUPD(value) ((PWM_CMPxMUPD_CPRUPD_Msk & ((value) << PWM_CMPxMUPD_CPRUPD_Pos)))
+#define PWM_CMPxMUPD_CUPRUPD_Pos 16
+#define PWM_CMPxMUPD_CUPRUPD_Msk (0xfu << PWM_CMPxMUPD_CUPRUPD_Pos) /**< \brief (PWM_CMPxMUPD) Comparison x Update Period Update */
+#define PWM_CMPxMUPD_CUPRUPD(value) ((PWM_CMPxMUPD_CUPRUPD_Msk & ((value) << PWM_CMPxMUPD_CUPRUPD_Pos)))
+/* -------- PWM_CMR : (PWM Offset: N/A) PWM Channel Mode Register -------- */
+#define PWM_CMR_CPRE_Pos 0
+#define PWM_CMR_CPRE_Msk (0xfu << PWM_CMR_CPRE_Pos) /**< \brief (PWM_CMR) Channel Pre-scaler */
+#define PWM_CMR_CPRE_MCK (0x0u << 0) /**< \brief (PWM_CMR) MCK */
+#define PWM_CMR_CPRE_MCK_DIV_2 (0x1u << 0) /**< \brief (PWM_CMR) MCK/2 */
+#define PWM_CMR_CPRE_MCK_DIV_4 (0x2u << 0) /**< \brief (PWM_CMR) MCK/4 */
+#define PWM_CMR_CPRE_MCK_DIV_8 (0x3u << 0) /**< \brief (PWM_CMR) MCK/8 */
+#define PWM_CMR_CPRE_MCK_DIV_16 (0x4u << 0) /**< \brief (PWM_CMR) MCK/16 */
+#define PWM_CMR_CPRE_MCK_DIV_32 (0x5u << 0) /**< \brief (PWM_CMR) MCK/32 */
+#define PWM_CMR_CPRE_MCK_DIV_64 (0x6u << 0) /**< \brief (PWM_CMR) MCK/64 */
+#define PWM_CMR_CPRE_MCK_DIV_128 (0x7u << 0) /**< \brief (PWM_CMR) MCK/128 */
+#define PWM_CMR_CPRE_MCK_DIV_256 (0x8u << 0) /**< \brief (PWM_CMR) MCK/256 */
+#define PWM_CMR_CPRE_MCK_DIV_512 (0x9u << 0) /**< \brief (PWM_CMR) MCK/512 */
+#define PWM_CMR_CPRE_MCK_DIV_1024 (0xAu << 0) /**< \brief (PWM_CMR) MCK/1024 */
+#define PWM_CMR_CPRE_CKA (0xBu << 0) /**< \brief (PWM_CMR) CLKA */
+#define PWM_CMR_CPRE_CKB (0xCu << 0) /**< \brief (PWM_CMR) CLKB */
+#define PWM_CMR_CALG (0x1u << 8) /**< \brief (PWM_CMR) Channel Alignment */
+#define PWM_CMR_CPOL (0x1u << 9) /**< \brief (PWM_CMR) Channel Polarity */
+#define PWM_CMR_CES (0x1u << 10) /**< \brief (PWM_CMR) Counter Event Selection */
+#define PWM_CMR_DTE (0x1u << 16) /**< \brief (PWM_CMR) Dead-Time Generator Enable */
+#define PWM_CMR_DTHI (0x1u << 17) /**< \brief (PWM_CMR) Dead-Time PWMHx Output Inverted */
+#define PWM_CMR_DTLI (0x1u << 18) /**< \brief (PWM_CMR) Dead-Time PWMLx Output Inverted */
+/* -------- PWM_CDTY : (PWM Offset: N/A) PWM Channel Duty Cycle Register -------- */
+#define PWM_CDTY_CDTY_Pos 0
+#define PWM_CDTY_CDTY_Msk (0xffffffu << PWM_CDTY_CDTY_Pos) /**< \brief (PWM_CDTY) Channel Duty-Cycle */
+#define PWM_CDTY_CDTY(value) ((PWM_CDTY_CDTY_Msk & ((value) << PWM_CDTY_CDTY_Pos)))
+/* -------- PWM_CDTYUPD : (PWM Offset: N/A) PWM Channel Duty Cycle Update Register -------- */
+#define PWM_CDTYUPD_CDTYUPD_Pos 0
+#define PWM_CDTYUPD_CDTYUPD_Msk (0xffffffu << PWM_CDTYUPD_CDTYUPD_Pos) /**< \brief (PWM_CDTYUPD) Channel Duty-Cycle Update */
+#define PWM_CDTYUPD_CDTYUPD(value) ((PWM_CDTYUPD_CDTYUPD_Msk & ((value) << PWM_CDTYUPD_CDTYUPD_Pos)))
+/* -------- PWM_CPRD : (PWM Offset: N/A) PWM Channel Period Register -------- */
+#define PWM_CPRD_CPRD_Pos 0
+#define PWM_CPRD_CPRD_Msk (0xffffffu << PWM_CPRD_CPRD_Pos) /**< \brief (PWM_CPRD) Channel Period */
+#define PWM_CPRD_CPRD(value) ((PWM_CPRD_CPRD_Msk & ((value) << PWM_CPRD_CPRD_Pos)))
+/* -------- PWM_CPRDUPD : (PWM Offset: N/A) PWM Channel Period Update Register -------- */
+#define PWM_CPRDUPD_CPRDUPD_Pos 0
+#define PWM_CPRDUPD_CPRDUPD_Msk (0xffffffu << PWM_CPRDUPD_CPRDUPD_Pos) /**< \brief (PWM_CPRDUPD) Channel Period Update */
+#define PWM_CPRDUPD_CPRDUPD(value) ((PWM_CPRDUPD_CPRDUPD_Msk & ((value) << PWM_CPRDUPD_CPRDUPD_Pos)))
+/* -------- PWM_CCNT : (PWM Offset: N/A) PWM Channel Counter Register -------- */
+#define PWM_CCNT_CNT_Pos 0
+#define PWM_CCNT_CNT_Msk (0xffffffu << PWM_CCNT_CNT_Pos) /**< \brief (PWM_CCNT) Channel Counter Register */
+/* -------- PWM_DT : (PWM Offset: N/A) PWM Channel Dead Time Register -------- */
+#define PWM_DT_DTH_Pos 0
+#define PWM_DT_DTH_Msk (0xffffu << PWM_DT_DTH_Pos) /**< \brief (PWM_DT) Dead-Time Value for PWMHx Output */
+#define PWM_DT_DTH(value) ((PWM_DT_DTH_Msk & ((value) << PWM_DT_DTH_Pos)))
+#define PWM_DT_DTL_Pos 16
+#define PWM_DT_DTL_Msk (0xffffu << PWM_DT_DTL_Pos) /**< \brief (PWM_DT) Dead-Time Value for PWMLx Output */
+#define PWM_DT_DTL(value) ((PWM_DT_DTL_Msk & ((value) << PWM_DT_DTL_Pos)))
+/* -------- PWM_DTUPD : (PWM Offset: N/A) PWM Channel Dead Time Update Register -------- */
+#define PWM_DTUPD_DTHUPD_Pos 0
+#define PWM_DTUPD_DTHUPD_Msk (0xffffu << PWM_DTUPD_DTHUPD_Pos) /**< \brief (PWM_DTUPD) Dead-Time Value Update for PWMHx Output */
+#define PWM_DTUPD_DTHUPD(value) ((PWM_DTUPD_DTHUPD_Msk & ((value) << PWM_DTUPD_DTHUPD_Pos)))
+#define PWM_DTUPD_DTLUPD_Pos 16
+#define PWM_DTUPD_DTLUPD_Msk (0xffffu << PWM_DTUPD_DTLUPD_Pos) /**< \brief (PWM_DTUPD) Dead-Time Value Update for PWMLx Output */
+#define PWM_DTUPD_DTLUPD(value) ((PWM_DTUPD_DTLUPD_Msk & ((value) << PWM_DTUPD_DTLUPD_Pos)))
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Reset Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_RSTC Reset Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Rstc hardware registers */
+typedef struct {
+ WoReg RSTC_CR; /**< \brief (Rstc Offset: 0x00) Control Register */
+ RoReg RSTC_SR; /**< \brief (Rstc Offset: 0x04) Status Register */
+ RwReg RSTC_MR; /**< \brief (Rstc Offset: 0x08) Mode Register */
+} Rstc;
+#endif /* __ASSEMBLY__ */
+/* -------- RSTC_CR : (RSTC Offset: 0x00) Control Register -------- */
+#define RSTC_CR_PROCRST (0x1u << 0) /**< \brief (RSTC_CR) Processor Reset */
+#define RSTC_CR_PERRST (0x1u << 2) /**< \brief (RSTC_CR) Peripheral Reset */
+#define RSTC_CR_EXTRST (0x1u << 3) /**< \brief (RSTC_CR) External Reset */
+#define RSTC_CR_KEY_Pos 24
+#define RSTC_CR_KEY_Msk (0xffu << RSTC_CR_KEY_Pos) /**< \brief (RSTC_CR) Password */
+#define RSTC_CR_KEY(value) ((RSTC_CR_KEY_Msk & ((value) << RSTC_CR_KEY_Pos)))
+/* -------- RSTC_SR : (RSTC Offset: 0x04) Status Register -------- */
+#define RSTC_SR_URSTS (0x1u << 0) /**< \brief (RSTC_SR) User Reset Status */
+#define RSTC_SR_RSTTYP_Pos 8
+#define RSTC_SR_RSTTYP_Msk (0x7u << RSTC_SR_RSTTYP_Pos) /**< \brief (RSTC_SR) Reset Type */
+#define RSTC_SR_NRSTL (0x1u << 16) /**< \brief (RSTC_SR) NRST Pin Level */
+#define RSTC_SR_SRCMP (0x1u << 17) /**< \brief (RSTC_SR) Software Reset Command in Progress */
+/* -------- RSTC_MR : (RSTC Offset: 0x08) Mode Register -------- */
+#define RSTC_MR_URSTEN (0x1u << 0) /**< \brief (RSTC_MR) User Reset Enable */
+#define RSTC_MR_URSTIEN (0x1u << 4) /**< \brief (RSTC_MR) User Reset Interrupt Enable */
+#define RSTC_MR_ERSTL_Pos 8
+#define RSTC_MR_ERSTL_Msk (0xfu << RSTC_MR_ERSTL_Pos) /**< \brief (RSTC_MR) External Reset Length */
+#define RSTC_MR_ERSTL(value) ((RSTC_MR_ERSTL_Msk & ((value) << RSTC_MR_ERSTL_Pos)))
+#define RSTC_MR_KEY_Pos 24
+#define RSTC_MR_KEY_Msk (0xffu << RSTC_MR_KEY_Pos) /**< \brief (RSTC_MR) Password */
+#define RSTC_MR_KEY(value) ((RSTC_MR_KEY_Msk & ((value) << RSTC_MR_KEY_Pos)))
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Real-time Clock */
+/* ============================================================================= */
+/** \addtogroup SAM3S_RTC Real-time Clock */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Rtc hardware registers */
+typedef struct {
+ RwReg RTC_CR; /**< \brief (Rtc Offset: 0x00) Control Register */
+ RwReg RTC_MR; /**< \brief (Rtc Offset: 0x04) Mode Register */
+ RwReg RTC_TIMR; /**< \brief (Rtc Offset: 0x08) Time Register */
+ RwReg RTC_CALR; /**< \brief (Rtc Offset: 0x0C) Calendar Register */
+ RwReg RTC_TIMALR; /**< \brief (Rtc Offset: 0x10) Time Alarm Register */
+ RwReg RTC_CALALR; /**< \brief (Rtc Offset: 0x14) Calendar Alarm Register */
+ RoReg RTC_SR; /**< \brief (Rtc Offset: 0x18) Status Register */
+ WoReg RTC_SCCR; /**< \brief (Rtc Offset: 0x1C) Status Clear Command Register */
+ WoReg RTC_IER; /**< \brief (Rtc Offset: 0x20) Interrupt Enable Register */
+ WoReg RTC_IDR; /**< \brief (Rtc Offset: 0x24) Interrupt Disable Register */
+ RoReg RTC_IMR; /**< \brief (Rtc Offset: 0x28) Interrupt Mask Register */
+ RoReg RTC_VER; /**< \brief (Rtc Offset: 0x2C) Valid Entry Register */
+} Rtc;
+#endif /* __ASSEMBLY__ */
+/* -------- RTC_CR : (RTC Offset: 0x00) Control Register -------- */
+#define RTC_CR_UPDTIM (0x1u << 0) /**< \brief (RTC_CR) Update Request Time Register */
+#define RTC_CR_UPDCAL (0x1u << 1) /**< \brief (RTC_CR) Update Request Calendar Register */
+#define RTC_CR_TIMEVSEL_Pos 8
+#define RTC_CR_TIMEVSEL_Msk (0x3u << RTC_CR_TIMEVSEL_Pos) /**< \brief (RTC_CR) Time Event Selection */
+#define RTC_CR_TIMEVSEL_MINUTE (0x0u << 8) /**< \brief (RTC_CR) Minute change */
+#define RTC_CR_TIMEVSEL_HOUR (0x1u << 8) /**< \brief (RTC_CR) Hour change */
+#define RTC_CR_TIMEVSEL_MIDNIGHT (0x2u << 8) /**< \brief (RTC_CR) Every day at midnight */
+#define RTC_CR_TIMEVSEL_NOON (0x3u << 8) /**< \brief (RTC_CR) Every day at noon */
+#define RTC_CR_CALEVSEL_Pos 16
+#define RTC_CR_CALEVSEL_Msk (0x3u << RTC_CR_CALEVSEL_Pos) /**< \brief (RTC_CR) Calendar Event Selection */
+#define RTC_CR_CALEVSEL_WEEK (0x0u << 16) /**< \brief (RTC_CR) Week change (every Monday at time 00:00:00) */
+#define RTC_CR_CALEVSEL_MONTH (0x1u << 16) /**< \brief (RTC_CR) Month change (every 01 of each month at time 00:00:00) */
+#define RTC_CR_CALEVSEL_YEAR (0x2u << 16) /**< \brief (RTC_CR) Year change (every January 1 at time 00:00:00) */
+/* -------- RTC_MR : (RTC Offset: 0x04) Mode Register -------- */
+#define RTC_MR_HRMOD (0x1u << 0) /**< \brief (RTC_MR) 12-/24-hour Mode */
+/* -------- RTC_TIMR : (RTC Offset: 0x08) Time Register -------- */
+#define RTC_TIMR_SEC_Pos 0
+#define RTC_TIMR_SEC_Msk (0x7fu << RTC_TIMR_SEC_Pos) /**< \brief (RTC_TIMR) Current Second */
+#define RTC_TIMR_SEC(value) ((RTC_TIMR_SEC_Msk & ((value) << RTC_TIMR_SEC_Pos)))
+#define RTC_TIMR_MIN_Pos 8
+#define RTC_TIMR_MIN_Msk (0x7fu << RTC_TIMR_MIN_Pos) /**< \brief (RTC_TIMR) Current Minute */
+#define RTC_TIMR_MIN(value) ((RTC_TIMR_MIN_Msk & ((value) << RTC_TIMR_MIN_Pos)))
+#define RTC_TIMR_HOUR_Pos 16
+#define RTC_TIMR_HOUR_Msk (0x3fu << RTC_TIMR_HOUR_Pos) /**< \brief (RTC_TIMR) Current Hour */
+#define RTC_TIMR_HOUR(value) ((RTC_TIMR_HOUR_Msk & ((value) << RTC_TIMR_HOUR_Pos)))
+#define RTC_TIMR_AMPM (0x1u << 22) /**< \brief (RTC_TIMR) Ante Meridiem Post Meridiem Indicator */
+/* -------- RTC_CALR : (RTC Offset: 0x0C) Calendar Register -------- */
+#define RTC_CALR_CENT_Pos 0
+#define RTC_CALR_CENT_Msk (0x7fu << RTC_CALR_CENT_Pos) /**< \brief (RTC_CALR) Current Century */
+#define RTC_CALR_CENT(value) ((RTC_CALR_CENT_Msk & ((value) << RTC_CALR_CENT_Pos)))
+#define RTC_CALR_YEAR_Pos 8
+#define RTC_CALR_YEAR_Msk (0xffu << RTC_CALR_YEAR_Pos) /**< \brief (RTC_CALR) Current Year */
+#define RTC_CALR_YEAR(value) ((RTC_CALR_YEAR_Msk & ((value) << RTC_CALR_YEAR_Pos)))
+#define RTC_CALR_MONTH_Pos 16
+#define RTC_CALR_MONTH_Msk (0x1fu << RTC_CALR_MONTH_Pos) /**< \brief (RTC_CALR) Current Month */
+#define RTC_CALR_MONTH(value) ((RTC_CALR_MONTH_Msk & ((value) << RTC_CALR_MONTH_Pos)))
+#define RTC_CALR_DAY_Pos 21
+#define RTC_CALR_DAY_Msk (0x7u << RTC_CALR_DAY_Pos) /**< \brief (RTC_CALR) Current Day in Current Week */
+#define RTC_CALR_DAY(value) ((RTC_CALR_DAY_Msk & ((value) << RTC_CALR_DAY_Pos)))
+#define RTC_CALR_DATE_Pos 24
+#define RTC_CALR_DATE_Msk (0x3fu << RTC_CALR_DATE_Pos) /**< \brief (RTC_CALR) Current Day in Current Month */
+#define RTC_CALR_DATE(value) ((RTC_CALR_DATE_Msk & ((value) << RTC_CALR_DATE_Pos)))
+/* -------- RTC_TIMALR : (RTC Offset: 0x10) Time Alarm Register -------- */
+#define RTC_TIMALR_SEC_Pos 0
+#define RTC_TIMALR_SEC_Msk (0x7fu << RTC_TIMALR_SEC_Pos) /**< \brief (RTC_TIMALR) Second Alarm */
+#define RTC_TIMALR_SEC(value) ((RTC_TIMALR_SEC_Msk & ((value) << RTC_TIMALR_SEC_Pos)))
+#define RTC_TIMALR_SECEN (0x1u << 7) /**< \brief (RTC_TIMALR) Second Alarm Enable */
+#define RTC_TIMALR_MIN_Pos 8
+#define RTC_TIMALR_MIN_Msk (0x7fu << RTC_TIMALR_MIN_Pos) /**< \brief (RTC_TIMALR) Minute Alarm */
+#define RTC_TIMALR_MIN(value) ((RTC_TIMALR_MIN_Msk & ((value) << RTC_TIMALR_MIN_Pos)))
+#define RTC_TIMALR_MINEN (0x1u << 15) /**< \brief (RTC_TIMALR) Minute Alarm Enable */
+#define RTC_TIMALR_HOUR_Pos 16
+#define RTC_TIMALR_HOUR_Msk (0x3fu << RTC_TIMALR_HOUR_Pos) /**< \brief (RTC_TIMALR) Hour Alarm */
+#define RTC_TIMALR_HOUR(value) ((RTC_TIMALR_HOUR_Msk & ((value) << RTC_TIMALR_HOUR_Pos)))
+#define RTC_TIMALR_AMPM (0x1u << 22) /**< \brief (RTC_TIMALR) AM/PM Indicator */
+#define RTC_TIMALR_HOUREN (0x1u << 23) /**< \brief (RTC_TIMALR) Hour Alarm Enable */
+/* -------- RTC_CALALR : (RTC Offset: 0x14) Calendar Alarm Register -------- */
+#define RTC_CALALR_MONTH_Pos 16
+#define RTC_CALALR_MONTH_Msk (0x1fu << RTC_CALALR_MONTH_Pos) /**< \brief (RTC_CALALR) Month Alarm */
+#define RTC_CALALR_MONTH(value) ((RTC_CALALR_MONTH_Msk & ((value) << RTC_CALALR_MONTH_Pos)))
+#define RTC_CALALR_MTHEN (0x1u << 23) /**< \brief (RTC_CALALR) Month Alarm Enable */
+#define RTC_CALALR_DATE_Pos 24
+#define RTC_CALALR_DATE_Msk (0x3fu << RTC_CALALR_DATE_Pos) /**< \brief (RTC_CALALR) Date Alarm */
+#define RTC_CALALR_DATE(value) ((RTC_CALALR_DATE_Msk & ((value) << RTC_CALALR_DATE_Pos)))
+#define RTC_CALALR_DATEEN (0x1u << 31) /**< \brief (RTC_CALALR) Date Alarm Enable */
+/* -------- RTC_SR : (RTC Offset: 0x18) Status Register -------- */
+#define RTC_SR_ACKUPD (0x1u << 0) /**< \brief (RTC_SR) Acknowledge for Update */
+#define RTC_SR_ALARM (0x1u << 1) /**< \brief (RTC_SR) Alarm Flag */
+#define RTC_SR_SEC (0x1u << 2) /**< \brief (RTC_SR) Second Event */
+#define RTC_SR_TIMEV (0x1u << 3) /**< \brief (RTC_SR) Time Event */
+#define RTC_SR_CALEV (0x1u << 4) /**< \brief (RTC_SR) Calendar Event */
+/* -------- RTC_SCCR : (RTC Offset: 0x1C) Status Clear Command Register -------- */
+#define RTC_SCCR_ACKCLR (0x1u << 0) /**< \brief (RTC_SCCR) Acknowledge Clear */
+#define RTC_SCCR_ALRCLR (0x1u << 1) /**< \brief (RTC_SCCR) Alarm Clear */
+#define RTC_SCCR_SECCLR (0x1u << 2) /**< \brief (RTC_SCCR) Second Clear */
+#define RTC_SCCR_TIMCLR (0x1u << 3) /**< \brief (RTC_SCCR) Time Clear */
+#define RTC_SCCR_CALCLR (0x1u << 4) /**< \brief (RTC_SCCR) Calendar Clear */
+/* -------- RTC_IER : (RTC Offset: 0x20) Interrupt Enable Register -------- */
+#define RTC_IER_ACKEN (0x1u << 0) /**< \brief (RTC_IER) Acknowledge Update Interrupt Enable */
+#define RTC_IER_ALREN (0x1u << 1) /**< \brief (RTC_IER) Alarm Interrupt Enable */
+#define RTC_IER_SECEN (0x1u << 2) /**< \brief (RTC_IER) Second Event Interrupt Enable */
+#define RTC_IER_TIMEN (0x1u << 3) /**< \brief (RTC_IER) Time Event Interrupt Enable */
+#define RTC_IER_CALEN (0x1u << 4) /**< \brief (RTC_IER) Calendar Event Interrupt Enable */
+/* -------- RTC_IDR : (RTC Offset: 0x24) Interrupt Disable Register -------- */
+#define RTC_IDR_ACKDIS (0x1u << 0) /**< \brief (RTC_IDR) Acknowledge Update Interrupt Disable */
+#define RTC_IDR_ALRDIS (0x1u << 1) /**< \brief (RTC_IDR) Alarm Interrupt Disable */
+#define RTC_IDR_SECDIS (0x1u << 2) /**< \brief (RTC_IDR) Second Event Interrupt Disable */
+#define RTC_IDR_TIMDIS (0x1u << 3) /**< \brief (RTC_IDR) Time Event Interrupt Disable */
+#define RTC_IDR_CALDIS (0x1u << 4) /**< \brief (RTC_IDR) Calendar Event Interrupt Disable */
+/* -------- RTC_IMR : (RTC Offset: 0x28) Interrupt Mask Register -------- */
+#define RTC_IMR_ACK (0x1u << 0) /**< \brief (RTC_IMR) Acknowledge Update Interrupt Mask */
+#define RTC_IMR_ALR (0x1u << 1) /**< \brief (RTC_IMR) Alarm Interrupt Mask */
+#define RTC_IMR_SEC (0x1u << 2) /**< \brief (RTC_IMR) Second Event Interrupt Mask */
+#define RTC_IMR_TIM (0x1u << 3) /**< \brief (RTC_IMR) Time Event Interrupt Mask */
+#define RTC_IMR_CAL (0x1u << 4) /**< \brief (RTC_IMR) Calendar Event Interrupt Mask */
+/* -------- RTC_VER : (RTC Offset: 0x2C) Valid Entry Register -------- */
+#define RTC_VER_NVTIM (0x1u << 0) /**< \brief (RTC_VER) Non-valid Time */
+#define RTC_VER_NVCAL (0x1u << 1) /**< \brief (RTC_VER) Non-valid Calendar */
+#define RTC_VER_NVTIMALR (0x1u << 2) /**< \brief (RTC_VER) Non-valid Time Alarm */
+#define RTC_VER_NVCALALR (0x1u << 3) /**< \brief (RTC_VER) Non-valid Calendar Alarm */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Real-time Timer */
+/* ============================================================================= */
+/** \addtogroup SAM3S_RTT Real-time Timer */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Rtt hardware registers */
+typedef struct {
+ RwReg RTT_MR; /**< \brief (Rtt Offset: 0x00) Mode Register */
+ RwReg RTT_AR; /**< \brief (Rtt Offset: 0x04) Alarm Register */
+ RoReg RTT_VR; /**< \brief (Rtt Offset: 0x08) Value Register */
+ RoReg RTT_SR; /**< \brief (Rtt Offset: 0x0C) Status Register */
+} Rtt;
+#endif /* __ASSEMBLY__ */
+/* -------- RTT_MR : (RTT Offset: 0x00) Mode Register -------- */
+#define RTT_MR_RTPRES_Pos 0
+#define RTT_MR_RTPRES_Msk (0xffffu << RTT_MR_RTPRES_Pos) /**< \brief (RTT_MR) Real-time Timer Prescaler Value */
+#define RTT_MR_RTPRES(value) ((RTT_MR_RTPRES_Msk & ((value) << RTT_MR_RTPRES_Pos)))
+#define RTT_MR_ALMIEN (0x1u << 16) /**< \brief (RTT_MR) Alarm Interrupt Enable */
+#define RTT_MR_RTTINCIEN (0x1u << 17) /**< \brief (RTT_MR) Real-time Timer Increment Interrupt Enable */
+#define RTT_MR_RTTRST (0x1u << 18) /**< \brief (RTT_MR) Real-time Timer Restart */
+/* -------- RTT_AR : (RTT Offset: 0x04) Alarm Register -------- */
+#define RTT_AR_ALMV_Pos 0
+#define RTT_AR_ALMV_Msk (0xffffffffu << RTT_AR_ALMV_Pos) /**< \brief (RTT_AR) Alarm Value */
+#define RTT_AR_ALMV(value) ((RTT_AR_ALMV_Msk & ((value) << RTT_AR_ALMV_Pos)))
+/* -------- RTT_VR : (RTT Offset: 0x08) Value Register -------- */
+#define RTT_VR_CRTV_Pos 0
+#define RTT_VR_CRTV_Msk (0xffffffffu << RTT_VR_CRTV_Pos) /**< \brief (RTT_VR) Current Real-time Value */
+/* -------- RTT_SR : (RTT Offset: 0x0C) Status Register -------- */
+#define RTT_SR_ALMS (0x1u << 0) /**< \brief (RTT_SR) Real-time Alarm Status */
+#define RTT_SR_RTTINC (0x1u << 1) /**< \brief (RTT_SR) Real-time Timer Increment */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Static Memory Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_SMC Static Memory Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief SmcCs_number hardware registers */
+typedef struct {
+ RwReg SMC_SETUP; /**< \brief (SmcCs_number Offset: 0x0) SMC Setup Register */
+ RwReg SMC_PULSE; /**< \brief (SmcCs_number Offset: 0x4) SMC Pulse Register */
+ RwReg SMC_CYCLE; /**< \brief (SmcCs_number Offset: 0x8) SMC Cycle Register */
+ RwReg SMC_MODE; /**< \brief (SmcCs_number Offset: 0xC) SMC Mode Register */
+} SmcCs_number;
+/** \brief Smc hardware registers */
+typedef struct {
+ SmcCs_number SMC_CS_NUMBER[5]; /**< \brief (Smc Offset: 0x0) CS_number = 0 .. 4 */
+ RwReg Reserved1[12];
+ RwReg SMC_OCMS; /**< \brief (Smc Offset: 0x80) SMC OCMS MODE Register */
+ WoReg SMC_KEY1; /**< \brief (Smc Offset: 0x84) SMC OCMS KEY1 Register */
+ WoReg SMC_KEY2; /**< \brief (Smc Offset: 0x88) SMC OCMS KEY2 Register */
+ RwReg Reserved2[22];
+ RwReg SMC_WPMR; /**< \brief (Smc Offset: 0xE4) SMC Write Protect Mode Register */
+ RoReg SMC_WPSR; /**< \brief (Smc Offset: 0xE8) SMC Write Protect Status Register */
+} Smc;
+#endif /* __ASSEMBLY__ */
+/* -------- SMC_SETUP : (SMC Offset: N/A) SMC Setup Register -------- */
+#define SMC_SETUP_NWE_SETUP_Pos 0
+#define SMC_SETUP_NWE_SETUP_Msk (0x3fu << SMC_SETUP_NWE_SETUP_Pos) /**< \brief (SMC_SETUP) NWE Setup Length */
+#define SMC_SETUP_NWE_SETUP(value) ((SMC_SETUP_NWE_SETUP_Msk & ((value) << SMC_SETUP_NWE_SETUP_Pos)))
+#define SMC_SETUP_NCS_WR_SETUP_Pos 8
+#define SMC_SETUP_NCS_WR_SETUP_Msk (0x3fu << SMC_SETUP_NCS_WR_SETUP_Pos) /**< \brief (SMC_SETUP) NCS Setup Length in WRITE Access */
+#define SMC_SETUP_NCS_WR_SETUP(value) ((SMC_SETUP_NCS_WR_SETUP_Msk & ((value) << SMC_SETUP_NCS_WR_SETUP_Pos)))
+#define SMC_SETUP_NRD_SETUP_Pos 16
+#define SMC_SETUP_NRD_SETUP_Msk (0x3fu << SMC_SETUP_NRD_SETUP_Pos) /**< \brief (SMC_SETUP) NRD Setup Length */
+#define SMC_SETUP_NRD_SETUP(value) ((SMC_SETUP_NRD_SETUP_Msk & ((value) << SMC_SETUP_NRD_SETUP_Pos)))
+#define SMC_SETUP_NCS_RD_SETUP_Pos 24
+#define SMC_SETUP_NCS_RD_SETUP_Msk (0x3fu << SMC_SETUP_NCS_RD_SETUP_Pos) /**< \brief (SMC_SETUP) NCS Setup Length in READ Access */
+#define SMC_SETUP_NCS_RD_SETUP(value) ((SMC_SETUP_NCS_RD_SETUP_Msk & ((value) << SMC_SETUP_NCS_RD_SETUP_Pos)))
+/* -------- SMC_PULSE : (SMC Offset: N/A) SMC Pulse Register -------- */
+#define SMC_PULSE_NWE_PULSE_Pos 0
+#define SMC_PULSE_NWE_PULSE_Msk (0x7fu << SMC_PULSE_NWE_PULSE_Pos) /**< \brief (SMC_PULSE) NWE Pulse Length */
+#define SMC_PULSE_NWE_PULSE(value) ((SMC_PULSE_NWE_PULSE_Msk & ((value) << SMC_PULSE_NWE_PULSE_Pos)))
+#define SMC_PULSE_NCS_WR_PULSE_Pos 8
+#define SMC_PULSE_NCS_WR_PULSE_Msk (0x7fu << SMC_PULSE_NCS_WR_PULSE_Pos) /**< \brief (SMC_PULSE) NCS Pulse Length in WRITE Access */
+#define SMC_PULSE_NCS_WR_PULSE(value) ((SMC_PULSE_NCS_WR_PULSE_Msk & ((value) << SMC_PULSE_NCS_WR_PULSE_Pos)))
+#define SMC_PULSE_NRD_PULSE_Pos 16
+#define SMC_PULSE_NRD_PULSE_Msk (0x7fu << SMC_PULSE_NRD_PULSE_Pos) /**< \brief (SMC_PULSE) NRD Pulse Length */
+#define SMC_PULSE_NRD_PULSE(value) ((SMC_PULSE_NRD_PULSE_Msk & ((value) << SMC_PULSE_NRD_PULSE_Pos)))
+#define SMC_PULSE_NCS_RD_PULSE_Pos 24
+#define SMC_PULSE_NCS_RD_PULSE_Msk (0x7fu << SMC_PULSE_NCS_RD_PULSE_Pos) /**< \brief (SMC_PULSE) NCS Pulse Length in READ Access */
+#define SMC_PULSE_NCS_RD_PULSE(value) ((SMC_PULSE_NCS_RD_PULSE_Msk & ((value) << SMC_PULSE_NCS_RD_PULSE_Pos)))
+/* -------- SMC_CYCLE : (SMC Offset: N/A) SMC Cycle Register -------- */
+#define SMC_CYCLE_NWE_CYCLE_Pos 0
+#define SMC_CYCLE_NWE_CYCLE_Msk (0x1ffu << SMC_CYCLE_NWE_CYCLE_Pos) /**< \brief (SMC_CYCLE) Total Write Cycle Length */
+#define SMC_CYCLE_NWE_CYCLE(value) ((SMC_CYCLE_NWE_CYCLE_Msk & ((value) << SMC_CYCLE_NWE_CYCLE_Pos)))
+#define SMC_CYCLE_NRD_CYCLE_Pos 16
+#define SMC_CYCLE_NRD_CYCLE_Msk (0x1ffu << SMC_CYCLE_NRD_CYCLE_Pos) /**< \brief (SMC_CYCLE) Total Read Cycle Length */
+#define SMC_CYCLE_NRD_CYCLE(value) ((SMC_CYCLE_NRD_CYCLE_Msk & ((value) << SMC_CYCLE_NRD_CYCLE_Pos)))
+/* -------- SMC_MODE : (SMC Offset: N/A) SMC Mode Register -------- */
+#define SMC_MODE_READ_MODE (0x1u << 0) /**< \brief (SMC_MODE) */
+#define SMC_MODE_WRITE_MODE (0x1u << 1) /**< \brief (SMC_MODE) */
+#define SMC_MODE_EXNW_MODE_Pos 4
+#define SMC_MODE_EXNW_MODE_Msk (0x3u << SMC_MODE_EXNW_MODE_Pos) /**< \brief (SMC_MODE) NWAIT Mode */
+#define SMC_MODE_EXNW_MODE_DISABLED (0x0u << 4) /**< \brief (SMC_MODE) Disabled */
+#define SMC_MODE_EXNW_MODE_FROZEN (0x2u << 4) /**< \brief (SMC_MODE) Frozen Mode */
+#define SMC_MODE_EXNW_MODE_READY (0x3u << 4) /**< \brief (SMC_MODE) Ready Mode */
+#define SMC_MODE_DBW_Pos 12
+#define SMC_MODE_DBW_Msk (0x3u << SMC_MODE_DBW_Pos) /**< \brief (SMC_MODE) Data Bus Width */
+#define SMC_MODE_DBW_8_BIT (0x0u << 12) /**< \brief (SMC_MODE) 8-bit bus */
+#define SMC_MODE_DBW_16_BIT (0x1u << 12) /**< \brief (SMC_MODE) 16-bit bus */
+#define SMC_MODE_DBW_32_BIT (0x2u << 12) /**< \brief (SMC_MODE) 32-bit bus */
+#define SMC_MODE_TDF_CYCLES_Pos 16
+#define SMC_MODE_TDF_CYCLES_Msk (0xfu << SMC_MODE_TDF_CYCLES_Pos) /**< \brief (SMC_MODE) Data Float Time */
+#define SMC_MODE_TDF_CYCLES(value) ((SMC_MODE_TDF_CYCLES_Msk & ((value) << SMC_MODE_TDF_CYCLES_Pos)))
+#define SMC_MODE_TDF_MODE (0x1u << 20) /**< \brief (SMC_MODE) TDF Optimization */
+#define SMC_MODE_PMEN (0x1u << 24) /**< \brief (SMC_MODE) Page Mode Enabled */
+#define SMC_MODE_PS_Pos 28
+#define SMC_MODE_PS_Msk (0x3u << SMC_MODE_PS_Pos) /**< \brief (SMC_MODE) Page Size */
+#define SMC_MODE_PS_4_BYTE (0x0u << 28) /**< \brief (SMC_MODE) 4-byte page */
+#define SMC_MODE_PS_8_BYTE (0x1u << 28) /**< \brief (SMC_MODE) 8-byte page */
+#define SMC_MODE_PS_16_BYTE (0x2u << 28) /**< \brief (SMC_MODE) 16-byte page */
+#define SMC_MODE_PS_32_BYTE (0x3u << 28) /**< \brief (SMC_MODE) 32-byte page */
+/* -------- SMC_OCMS : (SMC Offset: 0x80) SMC OCMS MODE Register -------- */
+#define SMC_OCMS_SMSE (0x1u << 0) /**< \brief (SMC_OCMS) Static Memory Controller Scrambling Enable */
+#define SMC_OCMS_CS0SE (0x1u << 16) /**< \brief (SMC_OCMS) Chip Select (x = 0 to 3) Scrambling Enable */
+#define SMC_OCMS_CS1SE (0x1u << 17) /**< \brief (SMC_OCMS) Chip Select (x = 0 to 3) Scrambling Enable */
+#define SMC_OCMS_CS2SE (0x1u << 18) /**< \brief (SMC_OCMS) Chip Select (x = 0 to 3) Scrambling Enable */
+#define SMC_OCMS_CS3SE (0x1u << 19) /**< \brief (SMC_OCMS) Chip Select (x = 0 to 3) Scrambling Enable */
+/* -------- SMC_KEY1 : (SMC Offset: 0x84) SMC OCMS KEY1 Register -------- */
+#define SMC_KEY1_KEY1_Pos 0
+#define SMC_KEY1_KEY1_Msk (0xffffffffu << SMC_KEY1_KEY1_Pos) /**< \brief (SMC_KEY1) Off Chip Memory Scrambling (OCMS) Key Part 1 */
+#define SMC_KEY1_KEY1(value) ((SMC_KEY1_KEY1_Msk & ((value) << SMC_KEY1_KEY1_Pos)))
+/* -------- SMC_KEY2 : (SMC Offset: 0x88) SMC OCMS KEY2 Register -------- */
+#define SMC_KEY2_KEY2_Pos 0
+#define SMC_KEY2_KEY2_Msk (0xffffffffu << SMC_KEY2_KEY2_Pos) /**< \brief (SMC_KEY2) Off Chip Memory Scrambling (OCMS) Key Part 2 */
+#define SMC_KEY2_KEY2(value) ((SMC_KEY2_KEY2_Msk & ((value) << SMC_KEY2_KEY2_Pos)))
+/* -------- SMC_WPMR : (SMC Offset: 0xE4) SMC Write Protect Mode Register -------- */
+#define SMC_WPMR_WPEN (0x1u << 0) /**< \brief (SMC_WPMR) Write Protect Enable */
+#define SMC_WPMR_WPKEY_Pos 8
+#define SMC_WPMR_WPKEY_Msk (0xffffffu << SMC_WPMR_WPKEY_Pos) /**< \brief (SMC_WPMR) Write Protect KEY */
+#define SMC_WPMR_WPKEY(value) ((SMC_WPMR_WPKEY_Msk & ((value) << SMC_WPMR_WPKEY_Pos)))
+/* -------- SMC_WPSR : (SMC Offset: 0xE8) SMC Write Protect Status Register -------- */
+#define SMC_WPSR_WPVS (0x1u << 0) /**< \brief (SMC_WPSR) Write Protect Enable */
+#define SMC_WPSR_WPVSRC_Pos 8
+#define SMC_WPSR_WPVSRC_Msk (0xffffu << SMC_WPSR_WPVSRC_Pos) /**< \brief (SMC_WPSR) Write Protect Violation Source */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Serial Peripheral Interface */
+/* ============================================================================= */
+/** \addtogroup SAM3S_SPI Serial Peripheral Interface */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Spi hardware registers */
+typedef struct {
+ WoReg SPI_CR; /**< \brief (Spi Offset: 0x00) Control Register */
+ RwReg SPI_MR; /**< \brief (Spi Offset: 0x04) Mode Register */
+ RoReg SPI_RDR; /**< \brief (Spi Offset: 0x08) Receive Data Register */
+ WoReg SPI_TDR; /**< \brief (Spi Offset: 0x0C) Transmit Data Register */
+ RoReg SPI_SR; /**< \brief (Spi Offset: 0x10) Status Register */
+ WoReg SPI_IER; /**< \brief (Spi Offset: 0x14) Interrupt Enable Register */
+ WoReg SPI_IDR; /**< \brief (Spi Offset: 0x18) Interrupt Disable Register */
+ RoReg SPI_IMR; /**< \brief (Spi Offset: 0x1C) Interrupt Mask Register */
+ RwReg Reserved1[4];
+ RwReg SPI_CSR[4]; /**< \brief (Spi Offset: 0x30) Chip Select Register */
+ RwReg Reserved2[41];
+ RwReg SPI_WPMR; /**< \brief (Spi Offset: 0xE4) Write Protection Control Register */
+ RoReg SPI_WPSR; /**< \brief (Spi Offset: 0xE8) Write Protection Status Register */
+ RwReg Reserved3[5];
+ RwReg SPI_RPR; /**< \brief (Spi Offset: 0x100) Receive Pointer Register */
+ RwReg SPI_RCR; /**< \brief (Spi Offset: 0x104) Receive Counter Register */
+ RwReg SPI_TPR; /**< \brief (Spi Offset: 0x108) Transmit Pointer Register */
+ RwReg SPI_TCR; /**< \brief (Spi Offset: 0x10C) Transmit Counter Register */
+ RwReg SPI_RNPR; /**< \brief (Spi Offset: 0x110) Receive Next Pointer Register */
+ RwReg SPI_RNCR; /**< \brief (Spi Offset: 0x114) Receive Next Counter Register */
+ RwReg SPI_TNPR; /**< \brief (Spi Offset: 0x118) Transmit Next Pointer Register */
+ RwReg SPI_TNCR; /**< \brief (Spi Offset: 0x11C) Transmit Next Counter Register */
+ WoReg SPI_PTCR; /**< \brief (Spi Offset: 0x120) Transfer Control Register */
+ RoReg SPI_PTSR; /**< \brief (Spi Offset: 0x124) Transfer Status Register */
+} Spi;
+#endif /* __ASSEMBLY__ */
+/* -------- SPI_CR : (SPI Offset: 0x00) Control Register -------- */
+#define SPI_CR_SPIEN (0x1u << 0) /**< \brief (SPI_CR) SPI Enable */
+#define SPI_CR_SPIDIS (0x1u << 1) /**< \brief (SPI_CR) SPI Disable */
+#define SPI_CR_SWRST (0x1u << 7) /**< \brief (SPI_CR) SPI Software Reset */
+#define SPI_CR_LASTXFER (0x1u << 24) /**< \brief (SPI_CR) Last Transfer */
+/* -------- SPI_MR : (SPI Offset: 0x04) Mode Register -------- */
+#define SPI_MR_MSTR (0x1u << 0) /**< \brief (SPI_MR) Master/Slave Mode */
+#define SPI_MR_PS (0x1u << 1) /**< \brief (SPI_MR) Peripheral Select */
+#define SPI_MR_PCSDEC (0x1u << 2) /**< \brief (SPI_MR) Chip Select Decode */
+#define SPI_MR_MODFDIS (0x1u << 4) /**< \brief (SPI_MR) Mode Fault Detection */
+#define SPI_MR_WDRBT (0x1u << 5) /**< \brief (SPI_MR) Wait Data Read Before Transfer */
+#define SPI_MR_LLB (0x1u << 7) /**< \brief (SPI_MR) Local Loopback Enable */
+#define SPI_MR_PCS_Pos 16
+#define SPI_MR_PCS_Msk (0xfu << SPI_MR_PCS_Pos) /**< \brief (SPI_MR) Peripheral Chip Select */
+#define SPI_MR_PCS(value) ((SPI_MR_PCS_Msk & ((value) << SPI_MR_PCS_Pos)))
+#define SPI_MR_DLYBCS_Pos 24
+#define SPI_MR_DLYBCS_Msk (0xffu << SPI_MR_DLYBCS_Pos) /**< \brief (SPI_MR) Delay Between Chip Selects */
+#define SPI_MR_DLYBCS(value) ((SPI_MR_DLYBCS_Msk & ((value) << SPI_MR_DLYBCS_Pos)))
+/* -------- SPI_RDR : (SPI Offset: 0x08) Receive Data Register -------- */
+#define SPI_RDR_RD_Pos 0
+#define SPI_RDR_RD_Msk (0xffffu << SPI_RDR_RD_Pos) /**< \brief (SPI_RDR) Receive Data */
+#define SPI_RDR_PCS_Pos 16
+#define SPI_RDR_PCS_Msk (0xfu << SPI_RDR_PCS_Pos) /**< \brief (SPI_RDR) Peripheral Chip Select */
+/* -------- SPI_TDR : (SPI Offset: 0x0C) Transmit Data Register -------- */
+#define SPI_TDR_TD_Pos 0
+#define SPI_TDR_TD_Msk (0xffffu << SPI_TDR_TD_Pos) /**< \brief (SPI_TDR) Transmit Data */
+#define SPI_TDR_TD(value) ((SPI_TDR_TD_Msk & ((value) << SPI_TDR_TD_Pos)))
+#define SPI_TDR_PCS_Pos 16
+#define SPI_TDR_PCS_Msk (0xfu << SPI_TDR_PCS_Pos) /**< \brief (SPI_TDR) Peripheral Chip Select */
+#define SPI_TDR_PCS(value) ((SPI_TDR_PCS_Msk & ((value) << SPI_TDR_PCS_Pos)))
+#define SPI_TDR_LASTXFER (0x1u << 24) /**< \brief (SPI_TDR) Last Transfer */
+/* -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- */
+#define SPI_SR_RDRF (0x1u << 0) /**< \brief (SPI_SR) Receive Data Register Full */
+#define SPI_SR_TDRE (0x1u << 1) /**< \brief (SPI_SR) Transmit Data Register Empty */
+#define SPI_SR_MODF (0x1u << 2) /**< \brief (SPI_SR) Mode Fault Error */
+#define SPI_SR_OVRES (0x1u << 3) /**< \brief (SPI_SR) Overrun Error Status */
+#define SPI_SR_ENDRX (0x1u << 4) /**< \brief (SPI_SR) End of RX buffer */
+#define SPI_SR_ENDTX (0x1u << 5) /**< \brief (SPI_SR) End of TX buffer */
+#define SPI_SR_RXBUFF (0x1u << 6) /**< \brief (SPI_SR) RX Buffer Full */
+#define SPI_SR_TXBUFE (0x1u << 7) /**< \brief (SPI_SR) TX Buffer Empty */
+#define SPI_SR_NSSR (0x1u << 8) /**< \brief (SPI_SR) NSS Rising */
+#define SPI_SR_TXEMPTY (0x1u << 9) /**< \brief (SPI_SR) Transmission Registers Empty */
+#define SPI_SR_UNDES (0x1u << 10) /**< \brief (SPI_SR) Underrun Error Status (Slave Mode Only) */
+#define SPI_SR_SPIENS (0x1u << 16) /**< \brief (SPI_SR) SPI Enable Status */
+/* -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- */
+#define SPI_IER_RDRF (0x1u << 0) /**< \brief (SPI_IER) Receive Data Register Full Interrupt Enable */
+#define SPI_IER_TDRE (0x1u << 1) /**< \brief (SPI_IER) SPI Transmit Data Register Empty Interrupt Enable */
+#define SPI_IER_MODF (0x1u << 2) /**< \brief (SPI_IER) Mode Fault Error Interrupt Enable */
+#define SPI_IER_OVRES (0x1u << 3) /**< \brief (SPI_IER) Overrun Error Interrupt Enable */
+#define SPI_IER_ENDRX (0x1u << 4) /**< \brief (SPI_IER) End of Receive Buffer Interrupt Enable */
+#define SPI_IER_ENDTX (0x1u << 5) /**< \brief (SPI_IER) End of Transmit Buffer Interrupt Enable */
+#define SPI_IER_RXBUFF (0x1u << 6) /**< \brief (SPI_IER) Receive Buffer Full Interrupt Enable */
+#define SPI_IER_TXBUFE (0x1u << 7) /**< \brief (SPI_IER) Transmit Buffer Empty Interrupt Enable */
+#define SPI_IER_NSSR (0x1u << 8) /**< \brief (SPI_IER) NSS Rising Interrupt Enable */
+#define SPI_IER_TXEMPTY (0x1u << 9) /**< \brief (SPI_IER) Transmission Registers Empty Enable */
+#define SPI_IER_UNDES (0x1u << 10) /**< \brief (SPI_IER) Underrun Error Interrupt Enable */
+/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- */
+#define SPI_IDR_RDRF (0x1u << 0) /**< \brief (SPI_IDR) Receive Data Register Full Interrupt Disable */
+#define SPI_IDR_TDRE (0x1u << 1) /**< \brief (SPI_IDR) SPI Transmit Data Register Empty Interrupt Disable */
+#define SPI_IDR_MODF (0x1u << 2) /**< \brief (SPI_IDR) Mode Fault Error Interrupt Disable */
+#define SPI_IDR_OVRES (0x1u << 3) /**< \brief (SPI_IDR) Overrun Error Interrupt Disable */
+#define SPI_IDR_ENDRX (0x1u << 4) /**< \brief (SPI_IDR) End of Receive Buffer Interrupt Disable */
+#define SPI_IDR_ENDTX (0x1u << 5) /**< \brief (SPI_IDR) End of Transmit Buffer Interrupt Disable */
+#define SPI_IDR_RXBUFF (0x1u << 6) /**< \brief (SPI_IDR) Receive Buffer Full Interrupt Disable */
+#define SPI_IDR_TXBUFE (0x1u << 7) /**< \brief (SPI_IDR) Transmit Buffer Empty Interrupt Disable */
+#define SPI_IDR_NSSR (0x1u << 8) /**< \brief (SPI_IDR) NSS Rising Interrupt Disable */
+#define SPI_IDR_TXEMPTY (0x1u << 9) /**< \brief (SPI_IDR) Transmission Registers Empty Disable */
+#define SPI_IDR_UNDES (0x1u << 10) /**< \brief (SPI_IDR) Underrun Error Interrupt Disable */
+/* -------- SPI_IMR : (SPI Offset: 0x1C) Interrupt Mask Register -------- */
+#define SPI_IMR_RDRF (0x1u << 0) /**< \brief (SPI_IMR) Receive Data Register Full Interrupt Mask */
+#define SPI_IMR_TDRE (0x1u << 1) /**< \brief (SPI_IMR) SPI Transmit Data Register Empty Interrupt Mask */
+#define SPI_IMR_MODF (0x1u << 2) /**< \brief (SPI_IMR) Mode Fault Error Interrupt Mask */
+#define SPI_IMR_OVRES (0x1u << 3) /**< \brief (SPI_IMR) Overrun Error Interrupt Mask */
+#define SPI_IMR_ENDRX (0x1u << 4) /**< \brief (SPI_IMR) End of Receive Buffer Interrupt Mask */
+#define SPI_IMR_ENDTX (0x1u << 5) /**< \brief (SPI_IMR) End of Transmit Buffer Interrupt Mask */
+#define SPI_IMR_RXBUFF (0x1u << 6) /**< \brief (SPI_IMR) Receive Buffer Full Interrupt Mask */
+#define SPI_IMR_TXBUFE (0x1u << 7) /**< \brief (SPI_IMR) Transmit Buffer Empty Interrupt Mask */
+#define SPI_IMR_NSSR (0x1u << 8) /**< \brief (SPI_IMR) NSS Rising Interrupt Mask */
+#define SPI_IMR_TXEMPTY (0x1u << 9) /**< \brief (SPI_IMR) Transmission Registers Empty Mask */
+#define SPI_IMR_UNDES (0x1u << 10) /**< \brief (SPI_IMR) Underrun Error Interrupt Mask */
+/* -------- SPI_CSR[4] : (SPI Offset: 0x30) Chip Select Register -------- */
+#define SPI_CSR_CPOL (0x1u << 0) /**< \brief (SPI_CSR[4]) Clock Polarity */
+#define SPI_CSR_NCPHA (0x1u << 1) /**< \brief (SPI_CSR[4]) Clock Phase */
+#define SPI_CSR_CSNAAT (0x1u << 2) /**< \brief (SPI_CSR[4]) Chip Select Not Active After Transfer (Ignored if CSAAT = 1) */
+#define SPI_CSR_CSAAT (0x1u << 3) /**< \brief (SPI_CSR[4]) Chip Select Not Active After Transfer (Ignored if CSAAT = 1) */
+#define SPI_CSR_BITS_Pos 4
+#define SPI_CSR_BITS_Msk (0xfu << SPI_CSR_BITS_Pos) /**< \brief (SPI_CSR[4]) Bits Per Transfer */
+#define SPI_CSR_BITS_8_BIT (0x0u << 4) /**< \brief (SPI_CSR[4]) 8_bits for transfer */
+#define SPI_CSR_BITS_9_BIT (0x1u << 4) /**< \brief (SPI_CSR[4]) 9_bits for transfer */
+#define SPI_CSR_BITS_10_BIT (0x2u << 4) /**< \brief (SPI_CSR[4]) 8_bits for transfer */
+#define SPI_CSR_BITS_11_BIT (0x3u << 4) /**< \brief (SPI_CSR[4]) 8_bits for transfer */
+#define SPI_CSR_BITS_12_BIT (0x4u << 4) /**< \brief (SPI_CSR[4]) 8_bits for transfer */
+#define SPI_CSR_BITS_13_BIT (0x5u << 4) /**< \brief (SPI_CSR[4]) 8_bits for transfer */
+#define SPI_CSR_BITS_14_BIT (0x6u << 4) /**< \brief (SPI_CSR[4]) 8_bits for transfer */
+#define SPI_CSR_BITS_15_BIT (0x7u << 4) /**< \brief (SPI_CSR[4]) 8_bits for transfer */
+#define SPI_CSR_BITS_16_BIT (0x8u << 4) /**< \brief (SPI_CSR[4]) 8_bits for transfer */
+#define SPI_CSR_SCBR_Pos 8
+#define SPI_CSR_SCBR_Msk (0xffu << SPI_CSR_SCBR_Pos) /**< \brief (SPI_CSR[4]) Serial Clock Baud Rate */
+#define SPI_CSR_SCBR(value) ((SPI_CSR_SCBR_Msk & ((value) << SPI_CSR_SCBR_Pos)))
+#define SPI_CSR_DLYBS_Pos 16
+#define SPI_CSR_DLYBS_Msk (0xffu << SPI_CSR_DLYBS_Pos) /**< \brief (SPI_CSR[4]) Delay Before SPCK */
+#define SPI_CSR_DLYBS(value) ((SPI_CSR_DLYBS_Msk & ((value) << SPI_CSR_DLYBS_Pos)))
+#define SPI_CSR_DLYBCT_Pos 24
+#define SPI_CSR_DLYBCT_Msk (0xffu << SPI_CSR_DLYBCT_Pos) /**< \brief (SPI_CSR[4]) Delay Between Consecutive Transfers */
+#define SPI_CSR_DLYBCT(value) ((SPI_CSR_DLYBCT_Msk & ((value) << SPI_CSR_DLYBCT_Pos)))
+/* -------- SPI_WPMR : (SPI Offset: 0xE4) Write Protection Control Register -------- */
+#define SPI_WPMR_SPIWPEN (0x1u << 0) /**< \brief (SPI_WPMR) SPI Write Protection Enable */
+#define SPI_WPMR_SPIWPKEY_Pos 8
+#define SPI_WPMR_SPIWPKEY_Msk (0xffffffu << SPI_WPMR_SPIWPKEY_Pos) /**< \brief (SPI_WPMR) SPI Write Protection Key Password */
+#define SPI_WPMR_SPIWPKEY(value) ((SPI_WPMR_SPIWPKEY_Msk & ((value) << SPI_WPMR_SPIWPKEY_Pos)))
+/* -------- SPI_WPSR : (SPI Offset: 0xE8) Write Protection Status Register -------- */
+#define SPI_WPSR_SPIWPVS_Pos 0
+#define SPI_WPSR_SPIWPVS_Msk (0x7u << SPI_WPSR_SPIWPVS_Pos) /**< \brief (SPI_WPSR) SPI Write Protection Violation Status */
+#define SPI_WPSR_SPIWPVSRC_Pos 8
+#define SPI_WPSR_SPIWPVSRC_Msk (0xffu << SPI_WPSR_SPIWPVSRC_Pos) /**< \brief (SPI_WPSR) SPI Write Protection Violation Source */
+/* -------- SPI_RPR : (SPI Offset: 0x100) Receive Pointer Register -------- */
+#define SPI_RPR_RXPTR_Pos 0
+#define SPI_RPR_RXPTR_Msk (0xffffffffu << SPI_RPR_RXPTR_Pos) /**< \brief (SPI_RPR) Receive Pointer Register */
+#define SPI_RPR_RXPTR(value) ((SPI_RPR_RXPTR_Msk & ((value) << SPI_RPR_RXPTR_Pos)))
+/* -------- SPI_RCR : (SPI Offset: 0x104) Receive Counter Register -------- */
+#define SPI_RCR_RXCTR_Pos 0
+#define SPI_RCR_RXCTR_Msk (0xffffu << SPI_RCR_RXCTR_Pos) /**< \brief (SPI_RCR) Receive Counter Register */
+#define SPI_RCR_RXCTR(value) ((SPI_RCR_RXCTR_Msk & ((value) << SPI_RCR_RXCTR_Pos)))
+/* -------- SPI_TPR : (SPI Offset: 0x108) Transmit Pointer Register -------- */
+#define SPI_TPR_TXPTR_Pos 0
+#define SPI_TPR_TXPTR_Msk (0xffffffffu << SPI_TPR_TXPTR_Pos) /**< \brief (SPI_TPR) Transmit Counter Register */
+#define SPI_TPR_TXPTR(value) ((SPI_TPR_TXPTR_Msk & ((value) << SPI_TPR_TXPTR_Pos)))
+/* -------- SPI_TCR : (SPI Offset: 0x10C) Transmit Counter Register -------- */
+#define SPI_TCR_TXCTR_Pos 0
+#define SPI_TCR_TXCTR_Msk (0xffffu << SPI_TCR_TXCTR_Pos) /**< \brief (SPI_TCR) Transmit Counter Register */
+#define SPI_TCR_TXCTR(value) ((SPI_TCR_TXCTR_Msk & ((value) << SPI_TCR_TXCTR_Pos)))
+/* -------- SPI_RNPR : (SPI Offset: 0x110) Receive Next Pointer Register -------- */
+#define SPI_RNPR_RXNPTR_Pos 0
+#define SPI_RNPR_RXNPTR_Msk (0xffffffffu << SPI_RNPR_RXNPTR_Pos) /**< \brief (SPI_RNPR) Receive Next Pointer */
+#define SPI_RNPR_RXNPTR(value) ((SPI_RNPR_RXNPTR_Msk & ((value) << SPI_RNPR_RXNPTR_Pos)))
+/* -------- SPI_RNCR : (SPI Offset: 0x114) Receive Next Counter Register -------- */
+#define SPI_RNCR_RXNCTR_Pos 0
+#define SPI_RNCR_RXNCTR_Msk (0xffffu << SPI_RNCR_RXNCTR_Pos) /**< \brief (SPI_RNCR) Receive Next Counter */
+#define SPI_RNCR_RXNCTR(value) ((SPI_RNCR_RXNCTR_Msk & ((value) << SPI_RNCR_RXNCTR_Pos)))
+/* -------- SPI_TNPR : (SPI Offset: 0x118) Transmit Next Pointer Register -------- */
+#define SPI_TNPR_TXNPTR_Pos 0
+#define SPI_TNPR_TXNPTR_Msk (0xffffffffu << SPI_TNPR_TXNPTR_Pos) /**< \brief (SPI_TNPR) Transmit Next Pointer */
+#define SPI_TNPR_TXNPTR(value) ((SPI_TNPR_TXNPTR_Msk & ((value) << SPI_TNPR_TXNPTR_Pos)))
+/* -------- SPI_TNCR : (SPI Offset: 0x11C) Transmit Next Counter Register -------- */
+#define SPI_TNCR_TXNCTR_Pos 0
+#define SPI_TNCR_TXNCTR_Msk (0xffffu << SPI_TNCR_TXNCTR_Pos) /**< \brief (SPI_TNCR) Transmit Counter Next */
+#define SPI_TNCR_TXNCTR(value) ((SPI_TNCR_TXNCTR_Msk & ((value) << SPI_TNCR_TXNCTR_Pos)))
+/* -------- SPI_PTCR : (SPI Offset: 0x120) Transfer Control Register -------- */
+#define SPI_PTCR_RXTEN (0x1u << 0) /**< \brief (SPI_PTCR) Receiver Transfer Enable */
+#define SPI_PTCR_RXTDIS (0x1u << 1) /**< \brief (SPI_PTCR) Receiver Transfer Disable */
+#define SPI_PTCR_TXTEN (0x1u << 8) /**< \brief (SPI_PTCR) Transmitter Transfer Enable */
+#define SPI_PTCR_TXTDIS (0x1u << 9) /**< \brief (SPI_PTCR) Transmitter Transfer Disable */
+/* -------- SPI_PTSR : (SPI Offset: 0x124) Transfer Status Register -------- */
+#define SPI_PTSR_RXTEN (0x1u << 0) /**< \brief (SPI_PTSR) Receiver Transfer Enable */
+#define SPI_PTSR_TXTEN (0x1u << 8) /**< \brief (SPI_PTSR) Transmitter Transfer Enable */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Synchronous Serial Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_SSC Synchronous Serial Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Ssc hardware registers */
+typedef struct {
+ WoReg SSC_CR; /**< \brief (Ssc Offset: 0x0) Control Register */
+ RwReg SSC_CMR; /**< \brief (Ssc Offset: 0x4) Clock Mode Register */
+ RwReg Reserved1[2];
+ RwReg SSC_RCMR; /**< \brief (Ssc Offset: 0x10) Receive Clock Mode Register */
+ RwReg SSC_RFMR; /**< \brief (Ssc Offset: 0x14) Receive Frame Mode Register */
+ RwReg SSC_TCMR; /**< \brief (Ssc Offset: 0x18) Transmit Clock Mode Register */
+ RwReg SSC_TFMR; /**< \brief (Ssc Offset: 0x1C) Transmit Frame Mode Register */
+ RoReg SSC_RHR; /**< \brief (Ssc Offset: 0x20) Receive Holding Register */
+ WoReg SSC_THR; /**< \brief (Ssc Offset: 0x24) Transmit Holding Register */
+ RwReg Reserved2[2];
+ RoReg SSC_RSHR; /**< \brief (Ssc Offset: 0x30) Receive Sync. Holding Register */
+ RwReg SSC_TSHR; /**< \brief (Ssc Offset: 0x34) Transmit Sync. Holding Register */
+ RwReg SSC_RC0R; /**< \brief (Ssc Offset: 0x38) Receive Compare 0 Register */
+ RwReg SSC_RC1R; /**< \brief (Ssc Offset: 0x3C) Receive Compare 1 Register */
+ RoReg SSC_SR; /**< \brief (Ssc Offset: 0x40) Status Register */
+ WoReg SSC_IER; /**< \brief (Ssc Offset: 0x44) Interrupt Enable Register */
+ WoReg SSC_IDR; /**< \brief (Ssc Offset: 0x48) Interrupt Disable Register */
+ RoReg SSC_IMR; /**< \brief (Ssc Offset: 0x4C) Interrupt Mask Register */
+ RwReg Reserved3[37];
+ RwReg SSC_WPMR; /**< \brief (Ssc Offset: 0xE4) Write Protect Mode Register */
+ RoReg SSC_WPSR; /**< \brief (Ssc Offset: 0xE8) Write Protect Status Register */
+ RwReg Reserved4[5];
+ RwReg SSC_RPR; /**< \brief (Ssc Offset: 0x100) Receive Pointer Register */
+ RwReg SSC_RCR; /**< \brief (Ssc Offset: 0x104) Receive Counter Register */
+ RwReg SSC_TPR; /**< \brief (Ssc Offset: 0x108) Transmit Pointer Register */
+ RwReg SSC_TCR; /**< \brief (Ssc Offset: 0x10C) Transmit Counter Register */
+ RwReg SSC_RNPR; /**< \brief (Ssc Offset: 0x110) Receive Next Pointer Register */
+ RwReg SSC_RNCR; /**< \brief (Ssc Offset: 0x114) Receive Next Counter Register */
+ RwReg SSC_TNPR; /**< \brief (Ssc Offset: 0x118) Transmit Next Pointer Register */
+ RwReg SSC_TNCR; /**< \brief (Ssc Offset: 0x11C) Transmit Next Counter Register */
+ WoReg SSC_PTCR; /**< \brief (Ssc Offset: 0x120) Transfer Control Register */
+ RoReg SSC_PTSR; /**< \brief (Ssc Offset: 0x124) Transfer Status Register */
+} Ssc;
+#endif /* __ASSEMBLY__ */
+/* -------- SSC_CR : (SSC Offset: 0x0) Control Register -------- */
+#define SSC_CR_RXEN (0x1u << 0) /**< \brief (SSC_CR) Receive Enable */
+#define SSC_CR_RXDIS (0x1u << 1) /**< \brief (SSC_CR) Receive Disable */
+#define SSC_CR_TXEN (0x1u << 8) /**< \brief (SSC_CR) Transmit Enable */
+#define SSC_CR_TXDIS (0x1u << 9) /**< \brief (SSC_CR) Transmit Disable */
+#define SSC_CR_SWRST (0x1u << 15) /**< \brief (SSC_CR) Software Reset */
+/* -------- SSC_CMR : (SSC Offset: 0x4) Clock Mode Register -------- */
+#define SSC_CMR_DIV_Pos 0
+#define SSC_CMR_DIV_Msk (0xfffu << SSC_CMR_DIV_Pos) /**< \brief (SSC_CMR) Clock Divider */
+#define SSC_CMR_DIV(value) ((SSC_CMR_DIV_Msk & ((value) << SSC_CMR_DIV_Pos)))
+/* -------- SSC_RCMR : (SSC Offset: 0x10) Receive Clock Mode Register -------- */
+#define SSC_RCMR_CKS_Pos 0
+#define SSC_RCMR_CKS_Msk (0x3u << SSC_RCMR_CKS_Pos) /**< \brief (SSC_RCMR) Receive Clock Selection */
+#define SSC_RCMR_CKS_MCK (0x0u << 0) /**< \brief (SSC_RCMR) Divided Clock */
+#define SSC_RCMR_CKS_TK (0x1u << 0) /**< \brief (SSC_RCMR) TK Clock signal */
+#define SSC_RCMR_CKS_RK (0x2u << 0) /**< \brief (SSC_RCMR) RK pin */
+#define SSC_RCMR_CKO_Pos 2
+#define SSC_RCMR_CKO_Msk (0x7u << SSC_RCMR_CKO_Pos) /**< \brief (SSC_RCMR) Receive Clock Output Mode Selection */
+#define SSC_RCMR_CKO_NONE (0x0u << 2) /**< \brief (SSC_RCMR) None */
+#define SSC_RCMR_CKO_CONTINUOUS (0x1u << 2) /**< \brief (SSC_RCMR) Continuous Receive Clock */
+#define SSC_RCMR_CKO_TRANSFER (0x2u << 2) /**< \brief (SSC_RCMR) Receive Clock only during data transfers */
+#define SSC_RCMR_CKI (0x1u << 5) /**< \brief (SSC_RCMR) Receive Clock Inversion */
+#define SSC_RCMR_CKG_Pos 6
+#define SSC_RCMR_CKG_Msk (0x3u << SSC_RCMR_CKG_Pos) /**< \brief (SSC_RCMR) Receive Clock Gating Selection */
+#define SSC_RCMR_CKG_NONE (0x0u << 6) /**< \brief (SSC_RCMR) None */
+#define SSC_RCMR_CKG_CONTINUOUS (0x1u << 6) /**< \brief (SSC_RCMR) Continuous Receive Clock */
+#define SSC_RCMR_CKG_TRANSFER (0x2u << 6) /**< \brief (SSC_RCMR) Receive Clock only during data transfers */
+#define SSC_RCMR_START_Pos 8
+#define SSC_RCMR_START_Msk (0xfu << SSC_RCMR_START_Pos) /**< \brief (SSC_RCMR) Receive Start Selection */
+#define SSC_RCMR_START_CONTINUOUS (0x0u << 8) /**< \brief (SSC_RCMR) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. */
+#define SSC_RCMR_START_TRANSMIT (0x1u << 8) /**< \brief (SSC_RCMR) Transmit start */
+#define SSC_RCMR_START_RF_LOW (0x2u << 8) /**< \brief (SSC_RCMR) Detection of a low level on RF signal */
+#define SSC_RCMR_START_RF_HIGH (0x3u << 8) /**< \brief (SSC_RCMR) Detection of a high level on RF signal */
+#define SSC_RCMR_START_RF_FALLING (0x4u << 8) /**< \brief (SSC_RCMR) Detection of a falling edge on RF signal */
+#define SSC_RCMR_START_RF_RISING (0x5u << 8) /**< \brief (SSC_RCMR) Detection of a rising edge on RF signal */
+#define SSC_RCMR_START_RF_LEVEL (0x6u << 8) /**< \brief (SSC_RCMR) Detection of any level change on RF signal */
+#define SSC_RCMR_START_RF_EDGE (0x7u << 8) /**< \brief (SSC_RCMR) Detection of any edge on RF signal */
+#define SSC_RCMR_START_CMP_0 (0x8u << 8) /**< \brief (SSC_RCMR) Compare 0 */
+#define SSC_RCMR_STOP (0x1u << 12) /**< \brief (SSC_RCMR) Receive Stop Selection */
+#define SSC_RCMR_STTDLY_Pos 16
+#define SSC_RCMR_STTDLY_Msk (0xffu << SSC_RCMR_STTDLY_Pos) /**< \brief (SSC_RCMR) Receive Start Delay */
+#define SSC_RCMR_STTDLY(value) ((SSC_RCMR_STTDLY_Msk & ((value) << SSC_RCMR_STTDLY_Pos)))
+#define SSC_RCMR_PERIOD_Pos 24
+#define SSC_RCMR_PERIOD_Msk (0xffu << SSC_RCMR_PERIOD_Pos) /**< \brief (SSC_RCMR) Receive Period Divider Selection */
+#define SSC_RCMR_PERIOD(value) ((SSC_RCMR_PERIOD_Msk & ((value) << SSC_RCMR_PERIOD_Pos)))
+/* -------- SSC_RFMR : (SSC Offset: 0x14) Receive Frame Mode Register -------- */
+#define SSC_RFMR_DATLEN_Pos 0
+#define SSC_RFMR_DATLEN_Msk (0x1fu << SSC_RFMR_DATLEN_Pos) /**< \brief (SSC_RFMR) Data Length */
+#define SSC_RFMR_DATLEN(value) ((SSC_RFMR_DATLEN_Msk & ((value) << SSC_RFMR_DATLEN_Pos)))
+#define SSC_RFMR_LOOP (0x1u << 5) /**< \brief (SSC_RFMR) Loop Mode */
+#define SSC_RFMR_MSBF (0x1u << 7) /**< \brief (SSC_RFMR) Most Significant Bit First */
+#define SSC_RFMR_DATNB_Pos 8
+#define SSC_RFMR_DATNB_Msk (0xfu << SSC_RFMR_DATNB_Pos) /**< \brief (SSC_RFMR) Data Number per Frame */
+#define SSC_RFMR_DATNB(value) ((SSC_RFMR_DATNB_Msk & ((value) << SSC_RFMR_DATNB_Pos)))
+#define SSC_RFMR_FSLEN_Pos 16
+#define SSC_RFMR_FSLEN_Msk (0xfu << SSC_RFMR_FSLEN_Pos) /**< \brief (SSC_RFMR) Receive Frame Sync Length */
+#define SSC_RFMR_FSLEN(value) ((SSC_RFMR_FSLEN_Msk & ((value) << SSC_RFMR_FSLEN_Pos)))
+#define SSC_RFMR_FSOS_Pos 20
+#define SSC_RFMR_FSOS_Msk (0x7u << SSC_RFMR_FSOS_Pos) /**< \brief (SSC_RFMR) Receive Frame Sync Output Selection */
+#define SSC_RFMR_FSOS_NONE (0x0u << 20) /**< \brief (SSC_RFMR) None */
+#define SSC_RFMR_FSOS_NEGATIVE (0x1u << 20) /**< \brief (SSC_RFMR) Negative Pulse */
+#define SSC_RFMR_FSOS_POSITIVE (0x2u << 20) /**< \brief (SSC_RFMR) Positive Pulse */
+#define SSC_RFMR_FSOS_LOW (0x3u << 20) /**< \brief (SSC_RFMR) Driven Low during data transfer */
+#define SSC_RFMR_FSOS_HIGH (0x4u << 20) /**< \brief (SSC_RFMR) Driven High during data transfer */
+#define SSC_RFMR_FSOS_TOGGLING (0x5u << 20) /**< \brief (SSC_RFMR) Toggling at each start of data transfer */
+#define SSC_RFMR_FSEDGE (0x1u << 24) /**< \brief (SSC_RFMR) Frame Sync Edge Detection */
+#define SSC_RFMR_FSEDGE_POSITIVE (0x0u << 24) /**< \brief (SSC_RFMR) Positive Edge Detection */
+#define SSC_RFMR_FSEDGE_NEGATIVE (0x1u << 24) /**< \brief (SSC_RFMR) Negative Edge Detection */
+#define SSC_RFMR_FSLEN_EXT_Pos 28
+#define SSC_RFMR_FSLEN_EXT_Msk (0xfu << SSC_RFMR_FSLEN_EXT_Pos) /**< \brief (SSC_RFMR) FSLEN Field Extension */
+#define SSC_RFMR_FSLEN_EXT(value) ((SSC_RFMR_FSLEN_EXT_Msk & ((value) << SSC_RFMR_FSLEN_EXT_Pos)))
+/* -------- SSC_TCMR : (SSC Offset: 0x18) Transmit Clock Mode Register -------- */
+#define SSC_TCMR_CKS_Pos 0
+#define SSC_TCMR_CKS_Msk (0x3u << SSC_TCMR_CKS_Pos) /**< \brief (SSC_TCMR) Transmit Clock Selection */
+#define SSC_TCMR_CKS_MCK (0x0u << 0) /**< \brief (SSC_TCMR) Divided Clock */
+#define SSC_TCMR_CKS_TK (0x1u << 0) /**< \brief (SSC_TCMR) TK Clock signal */
+#define SSC_TCMR_CKS_RK (0x2u << 0) /**< \brief (SSC_TCMR) RK pin */
+#define SSC_TCMR_CKO_Pos 2
+#define SSC_TCMR_CKO_Msk (0x7u << SSC_TCMR_CKO_Pos) /**< \brief (SSC_TCMR) Transmit Clock Output Mode Selection */
+#define SSC_TCMR_CKO_NONE (0x0u << 2) /**< \brief (SSC_TCMR) None */
+#define SSC_TCMR_CKO_CONTINUOUS (0x1u << 2) /**< \brief (SSC_TCMR) Continuous Receive Clock */
+#define SSC_TCMR_CKO_TRANSFER (0x2u << 2) /**< \brief (SSC_TCMR) Transmit Clock only during data transfers */
+#define SSC_TCMR_CKI (0x1u << 5) /**< \brief (SSC_TCMR) Transmit Clock Inversion */
+#define SSC_TCMR_CKG_Pos 6
+#define SSC_TCMR_CKG_Msk (0x3u << SSC_TCMR_CKG_Pos) /**< \brief (SSC_TCMR) Transmit Clock Gating Selection */
+#define SSC_TCMR_CKG_NONE (0x0u << 6) /**< \brief (SSC_TCMR) None */
+#define SSC_TCMR_CKG_CONTINUOUS (0x1u << 6) /**< \brief (SSC_TCMR) Transmit Clock enabled only if TF Low */
+#define SSC_TCMR_CKG_TRANSFER (0x2u << 6) /**< \brief (SSC_TCMR) Transmit Clock enabled only if TF High */
+#define SSC_TCMR_START_Pos 8
+#define SSC_TCMR_START_Msk (0xfu << SSC_TCMR_START_Pos) /**< \brief (SSC_TCMR) Transmit Start Selection */
+#define SSC_TCMR_START_CONTINUOUS (0x0u << 8) /**< \brief (SSC_TCMR) Continuous, as soon as a word is written in the SSC_THR Register (if Transmit is enabled), and immediately after the end of transfer of the previous data. */
+#define SSC_TCMR_START_RECEIVE (0x1u << 8) /**< \brief (SSC_TCMR) Receive start */
+#define SSC_TCMR_START_RF_LOW (0x2u << 8) /**< \brief (SSC_TCMR) Detection of a low level on TF signal */
+#define SSC_TCMR_START_RF_HIGH (0x3u << 8) /**< \brief (SSC_TCMR) Detection of a high level on TF signal */
+#define SSC_TCMR_START_RF_FALLING (0x4u << 8) /**< \brief (SSC_TCMR) Detection of a falling edge on TF signal */
+#define SSC_TCMR_START_RF_RISING (0x5u << 8) /**< \brief (SSC_TCMR) Detection of a rising edge on TF signal */
+#define SSC_TCMR_START_RF_LEVEL (0x6u << 8) /**< \brief (SSC_TCMR) Detection of any level change on TF signal */
+#define SSC_TCMR_START_RF_EDGE (0x7u << 8) /**< \brief (SSC_TCMR) Detection of any edge on TF signal */
+#define SSC_TCMR_START_CMP_0 (0x8u << 8) /**< \brief (SSC_TCMR) Compare 0 */
+#define SSC_TCMR_STTDLY_Pos 16
+#define SSC_TCMR_STTDLY_Msk (0xffu << SSC_TCMR_STTDLY_Pos) /**< \brief (SSC_TCMR) Transmit Start Delay */
+#define SSC_TCMR_STTDLY(value) ((SSC_TCMR_STTDLY_Msk & ((value) << SSC_TCMR_STTDLY_Pos)))
+#define SSC_TCMR_PERIOD_Pos 24
+#define SSC_TCMR_PERIOD_Msk (0xffu << SSC_TCMR_PERIOD_Pos) /**< \brief (SSC_TCMR) Transmit Period Divider Selection */
+#define SSC_TCMR_PERIOD(value) ((SSC_TCMR_PERIOD_Msk & ((value) << SSC_TCMR_PERIOD_Pos)))
+/* -------- SSC_TFMR : (SSC Offset: 0x1C) Transmit Frame Mode Register -------- */
+#define SSC_TFMR_DATLEN_Pos 0
+#define SSC_TFMR_DATLEN_Msk (0x1fu << SSC_TFMR_DATLEN_Pos) /**< \brief (SSC_TFMR) Data Length */
+#define SSC_TFMR_DATLEN(value) ((SSC_TFMR_DATLEN_Msk & ((value) << SSC_TFMR_DATLEN_Pos)))
+#define SSC_TFMR_DATDEF (0x1u << 5) /**< \brief (SSC_TFMR) Data Default Value */
+#define SSC_TFMR_MSBF (0x1u << 7) /**< \brief (SSC_TFMR) Most Significant Bit First */
+#define SSC_TFMR_DATNB_Pos 8
+#define SSC_TFMR_DATNB_Msk (0xfu << SSC_TFMR_DATNB_Pos) /**< \brief (SSC_TFMR) Data Number per frame */
+#define SSC_TFMR_DATNB(value) ((SSC_TFMR_DATNB_Msk & ((value) << SSC_TFMR_DATNB_Pos)))
+#define SSC_TFMR_FSLEN_Pos 16
+#define SSC_TFMR_FSLEN_Msk (0xfu << SSC_TFMR_FSLEN_Pos) /**< \brief (SSC_TFMR) Transmit Frame Sync Length */
+#define SSC_TFMR_FSLEN(value) ((SSC_TFMR_FSLEN_Msk & ((value) << SSC_TFMR_FSLEN_Pos)))
+#define SSC_TFMR_FSOS_Pos 20
+#define SSC_TFMR_FSOS_Msk (0x7u << SSC_TFMR_FSOS_Pos) /**< \brief (SSC_TFMR) Transmit Frame Sync Output Selection */
+#define SSC_TFMR_FSOS_NONE (0x0u << 20) /**< \brief (SSC_TFMR) None */
+#define SSC_TFMR_FSOS_NEGATIVE (0x1u << 20) /**< \brief (SSC_TFMR) Negative Pulse */
+#define SSC_TFMR_FSOS_POSITIVE (0x2u << 20) /**< \brief (SSC_TFMR) Positive Pulse */
+#define SSC_TFMR_FSOS_LOW (0x3u << 20) /**< \brief (SSC_TFMR) Driven Low during data transfer */
+#define SSC_TFMR_FSOS_HIGH (0x4u << 20) /**< \brief (SSC_TFMR) Driven High during data transfer */
+#define SSC_TFMR_FSOS_TOGGLING (0x5u << 20) /**< \brief (SSC_TFMR) Toggling at each start of data transfer */
+#define SSC_TFMR_FSDEN (0x1u << 23) /**< \brief (SSC_TFMR) Frame Sync Data Enable */
+#define SSC_TFMR_FSEDGE (0x1u << 24) /**< \brief (SSC_TFMR) Frame Sync Edge Detection */
+#define SSC_TFMR_FSEDGE_POSITIVE (0x0u << 24) /**< \brief (SSC_TFMR) Positive Edge Detection */
+#define SSC_TFMR_FSEDGE_NEGATIVE (0x1u << 24) /**< \brief (SSC_TFMR) Negative Edge Detection */
+#define SSC_TFMR_FSLEN_EXT_Pos 28
+#define SSC_TFMR_FSLEN_EXT_Msk (0xfu << SSC_TFMR_FSLEN_EXT_Pos) /**< \brief (SSC_TFMR) FSLEN Field Extension */
+#define SSC_TFMR_FSLEN_EXT(value) ((SSC_TFMR_FSLEN_EXT_Msk & ((value) << SSC_TFMR_FSLEN_EXT_Pos)))
+/* -------- SSC_RHR : (SSC Offset: 0x20) Receive Holding Register -------- */
+#define SSC_RHR_RDAT_Pos 0
+#define SSC_RHR_RDAT_Msk (0xffffffffu << SSC_RHR_RDAT_Pos) /**< \brief (SSC_RHR) Receive Data */
+/* -------- SSC_THR : (SSC Offset: 0x24) Transmit Holding Register -------- */
+#define SSC_THR_TDAT_Pos 0
+#define SSC_THR_TDAT_Msk (0xffffffffu << SSC_THR_TDAT_Pos) /**< \brief (SSC_THR) Transmit Data */
+#define SSC_THR_TDAT(value) ((SSC_THR_TDAT_Msk & ((value) << SSC_THR_TDAT_Pos)))
+/* -------- SSC_RSHR : (SSC Offset: 0x30) Receive Sync. Holding Register -------- */
+#define SSC_RSHR_RSDAT_Pos 0
+#define SSC_RSHR_RSDAT_Msk (0xffffu << SSC_RSHR_RSDAT_Pos) /**< \brief (SSC_RSHR) Receive Synchronization Data */
+/* -------- SSC_TSHR : (SSC Offset: 0x34) Transmit Sync. Holding Register -------- */
+#define SSC_TSHR_TSDAT_Pos 0
+#define SSC_TSHR_TSDAT_Msk (0xffffu << SSC_TSHR_TSDAT_Pos) /**< \brief (SSC_TSHR) Transmit Synchronization Data */
+#define SSC_TSHR_TSDAT(value) ((SSC_TSHR_TSDAT_Msk & ((value) << SSC_TSHR_TSDAT_Pos)))
+/* -------- SSC_RC0R : (SSC Offset: 0x38) Receive Compare 0 Register -------- */
+#define SSC_RC0R_CP0_Pos 0
+#define SSC_RC0R_CP0_Msk (0xffffu << SSC_RC0R_CP0_Pos) /**< \brief (SSC_RC0R) Receive Compare Data 0 */
+#define SSC_RC0R_CP0(value) ((SSC_RC0R_CP0_Msk & ((value) << SSC_RC0R_CP0_Pos)))
+/* -------- SSC_RC1R : (SSC Offset: 0x3C) Receive Compare 1 Register -------- */
+#define SSC_RC1R_CP1_Pos 0
+#define SSC_RC1R_CP1_Msk (0xffffu << SSC_RC1R_CP1_Pos) /**< \brief (SSC_RC1R) Receive Compare Data 1 */
+#define SSC_RC1R_CP1(value) ((SSC_RC1R_CP1_Msk & ((value) << SSC_RC1R_CP1_Pos)))
+/* -------- SSC_SR : (SSC Offset: 0x40) Status Register -------- */
+#define SSC_SR_TXRDY (0x1u << 0) /**< \brief (SSC_SR) Transmit Ready */
+#define SSC_SR_TXEMPTY (0x1u << 1) /**< \brief (SSC_SR) Transmit Empty */
+#define SSC_SR_ENDTX (0x1u << 2) /**< \brief (SSC_SR) End of Transmission */
+#define SSC_SR_TXBUFE (0x1u << 3) /**< \brief (SSC_SR) Transmit Buffer Empty */
+#define SSC_SR_RXRDY (0x1u << 4) /**< \brief (SSC_SR) Receive Ready */
+#define SSC_SR_OVRUN (0x1u << 5) /**< \brief (SSC_SR) Receive Overrun */
+#define SSC_SR_ENDRX (0x1u << 6) /**< \brief (SSC_SR) End of Reception */
+#define SSC_SR_RXBUFF (0x1u << 7) /**< \brief (SSC_SR) Receive Buffer Full */
+#define SSC_SR_CP0 (0x1u << 8) /**< \brief (SSC_SR) Compare 0 */
+#define SSC_SR_CP1 (0x1u << 9) /**< \brief (SSC_SR) Compare 1 */
+#define SSC_SR_TXSYN (0x1u << 10) /**< \brief (SSC_SR) Transmit Sync */
+#define SSC_SR_RXSYN (0x1u << 11) /**< \brief (SSC_SR) Receive Sync */
+#define SSC_SR_TXEN (0x1u << 16) /**< \brief (SSC_SR) Transmit Enable */
+#define SSC_SR_RXEN (0x1u << 17) /**< \brief (SSC_SR) Receive Enable */
+/* -------- SSC_IER : (SSC Offset: 0x44) Interrupt Enable Register -------- */
+#define SSC_IER_TXRDY (0x1u << 0) /**< \brief (SSC_IER) Transmit Ready Interrupt Enable */
+#define SSC_IER_TXEMPTY (0x1u << 1) /**< \brief (SSC_IER) Transmit Empty Interrupt Enable */
+#define SSC_IER_ENDTX (0x1u << 2) /**< \brief (SSC_IER) End of Transmission Interrupt Enable */
+#define SSC_IER_TXBUFE (0x1u << 3) /**< \brief (SSC_IER) Transmit Buffer Empty Interrupt Enable */
+#define SSC_IER_RXRDY (0x1u << 4) /**< \brief (SSC_IER) Receive Ready Interrupt Enable */
+#define SSC_IER_OVRUN (0x1u << 5) /**< \brief (SSC_IER) Receive Overrun Interrupt Enable */
+#define SSC_IER_ENDRX (0x1u << 6) /**< \brief (SSC_IER) End of Reception Interrupt Enable */
+#define SSC_IER_RXBUFF (0x1u << 7) /**< \brief (SSC_IER) Receive Buffer Full Interrupt Enable */
+#define SSC_IER_CP0 (0x1u << 8) /**< \brief (SSC_IER) Compare 0 Interrupt Enable */
+#define SSC_IER_CP1 (0x1u << 9) /**< \brief (SSC_IER) Compare 1 Interrupt Enable */
+#define SSC_IER_TXSYN (0x1u << 10) /**< \brief (SSC_IER) Tx Sync Interrupt Enable */
+#define SSC_IER_RXSYN (0x1u << 11) /**< \brief (SSC_IER) Rx Sync Interrupt Enable */
+/* -------- SSC_IDR : (SSC Offset: 0x48) Interrupt Disable Register -------- */
+#define SSC_IDR_TXRDY (0x1u << 0) /**< \brief (SSC_IDR) Transmit Ready Interrupt Disable */
+#define SSC_IDR_TXEMPTY (0x1u << 1) /**< \brief (SSC_IDR) Transmit Empty Interrupt Disable */
+#define SSC_IDR_ENDTX (0x1u << 2) /**< \brief (SSC_IDR) End of Transmission Interrupt Disable */
+#define SSC_IDR_TXBUFE (0x1u << 3) /**< \brief (SSC_IDR) Transmit Buffer Empty Interrupt Disable */
+#define SSC_IDR_RXRDY (0x1u << 4) /**< \brief (SSC_IDR) Receive Ready Interrupt Disable */
+#define SSC_IDR_OVRUN (0x1u << 5) /**< \brief (SSC_IDR) Receive Overrun Interrupt Disable */
+#define SSC_IDR_ENDRX (0x1u << 6) /**< \brief (SSC_IDR) End of Reception Interrupt Disable */
+#define SSC_IDR_RXBUFF (0x1u << 7) /**< \brief (SSC_IDR) Receive Buffer Full Interrupt Disable */
+#define SSC_IDR_CP0 (0x1u << 8) /**< \brief (SSC_IDR) Compare 0 Interrupt Disable */
+#define SSC_IDR_CP1 (0x1u << 9) /**< \brief (SSC_IDR) Compare 1 Interrupt Disable */
+#define SSC_IDR_TXSYN (0x1u << 10) /**< \brief (SSC_IDR) Tx Sync Interrupt Enable */
+#define SSC_IDR_RXSYN (0x1u << 11) /**< \brief (SSC_IDR) Rx Sync Interrupt Enable */
+/* -------- SSC_IMR : (SSC Offset: 0x4C) Interrupt Mask Register -------- */
+#define SSC_IMR_TXRDY (0x1u << 0) /**< \brief (SSC_IMR) Transmit Ready Interrupt Mask */
+#define SSC_IMR_TXEMPTY (0x1u << 1) /**< \brief (SSC_IMR) Transmit Empty Interrupt Mask */
+#define SSC_IMR_ENDTX (0x1u << 2) /**< \brief (SSC_IMR) End of Transmission Interrupt Mask */
+#define SSC_IMR_TXBUFE (0x1u << 3) /**< \brief (SSC_IMR) Transmit Buffer Empty Interrupt Mask */
+#define SSC_IMR_RXRDY (0x1u << 4) /**< \brief (SSC_IMR) Receive Ready Interrupt Mask */
+#define SSC_IMR_OVRUN (0x1u << 5) /**< \brief (SSC_IMR) Receive Overrun Interrupt Mask */
+#define SSC_IMR_ENDRX (0x1u << 6) /**< \brief (SSC_IMR) End of Reception Interrupt Mask */
+#define SSC_IMR_RXBUFF (0x1u << 7) /**< \brief (SSC_IMR) Receive Buffer Full Interrupt Mask */
+#define SSC_IMR_CP0 (0x1u << 8) /**< \brief (SSC_IMR) Compare 0 Interrupt Mask */
+#define SSC_IMR_CP1 (0x1u << 9) /**< \brief (SSC_IMR) Compare 1 Interrupt Mask */
+#define SSC_IMR_TXSYN (0x1u << 10) /**< \brief (SSC_IMR) Tx Sync Interrupt Mask */
+#define SSC_IMR_RXSYN (0x1u << 11) /**< \brief (SSC_IMR) Rx Sync Interrupt Mask */
+/* -------- SSC_WPMR : (SSC Offset: 0xE4) Write Protect Mode Register -------- */
+#define SSC_WPMR_WPEN (0x1u << 0) /**< \brief (SSC_WPMR) Write Protect Enable */
+#define SSC_WPMR_WPKEY_Pos 8
+#define SSC_WPMR_WPKEY_Msk (0xffffffu << SSC_WPMR_WPKEY_Pos) /**< \brief (SSC_WPMR) Write Protect KEY */
+#define SSC_WPMR_WPKEY(value) ((SSC_WPMR_WPKEY_Msk & ((value) << SSC_WPMR_WPKEY_Pos)))
+/* -------- SSC_WPSR : (SSC Offset: 0xE8) Write Protect Status Register -------- */
+#define SSC_WPSR_WPVS (0x1u << 0) /**< \brief (SSC_WPSR) Write Protect Violation Status */
+#define SSC_WPSR_WPVSRC_Pos 8
+#define SSC_WPSR_WPVSRC_Msk (0xffffu << SSC_WPSR_WPVSRC_Pos) /**< \brief (SSC_WPSR) Write Protect Violation Source */
+/* -------- SSC_RPR : (SSC Offset: 0x100) Receive Pointer Register -------- */
+#define SSC_RPR_RXPTR_Pos 0
+#define SSC_RPR_RXPTR_Msk (0xffffffffu << SSC_RPR_RXPTR_Pos) /**< \brief (SSC_RPR) Receive Pointer Register */
+#define SSC_RPR_RXPTR(value) ((SSC_RPR_RXPTR_Msk & ((value) << SSC_RPR_RXPTR_Pos)))
+/* -------- SSC_RCR : (SSC Offset: 0x104) Receive Counter Register -------- */
+#define SSC_RCR_RXCTR_Pos 0
+#define SSC_RCR_RXCTR_Msk (0xffffu << SSC_RCR_RXCTR_Pos) /**< \brief (SSC_RCR) Receive Counter Register */
+#define SSC_RCR_RXCTR(value) ((SSC_RCR_RXCTR_Msk & ((value) << SSC_RCR_RXCTR_Pos)))
+/* -------- SSC_TPR : (SSC Offset: 0x108) Transmit Pointer Register -------- */
+#define SSC_TPR_TXPTR_Pos 0
+#define SSC_TPR_TXPTR_Msk (0xffffffffu << SSC_TPR_TXPTR_Pos) /**< \brief (SSC_TPR) Transmit Counter Register */
+#define SSC_TPR_TXPTR(value) ((SSC_TPR_TXPTR_Msk & ((value) << SSC_TPR_TXPTR_Pos)))
+/* -------- SSC_TCR : (SSC Offset: 0x10C) Transmit Counter Register -------- */
+#define SSC_TCR_TXCTR_Pos 0
+#define SSC_TCR_TXCTR_Msk (0xffffu << SSC_TCR_TXCTR_Pos) /**< \brief (SSC_TCR) Transmit Counter Register */
+#define SSC_TCR_TXCTR(value) ((SSC_TCR_TXCTR_Msk & ((value) << SSC_TCR_TXCTR_Pos)))
+/* -------- SSC_RNPR : (SSC Offset: 0x110) Receive Next Pointer Register -------- */
+#define SSC_RNPR_RXNPTR_Pos 0
+#define SSC_RNPR_RXNPTR_Msk (0xffffffffu << SSC_RNPR_RXNPTR_Pos) /**< \brief (SSC_RNPR) Receive Next Pointer */
+#define SSC_RNPR_RXNPTR(value) ((SSC_RNPR_RXNPTR_Msk & ((value) << SSC_RNPR_RXNPTR_Pos)))
+/* -------- SSC_RNCR : (SSC Offset: 0x114) Receive Next Counter Register -------- */
+#define SSC_RNCR_RXNCTR_Pos 0
+#define SSC_RNCR_RXNCTR_Msk (0xffffu << SSC_RNCR_RXNCTR_Pos) /**< \brief (SSC_RNCR) Receive Next Counter */
+#define SSC_RNCR_RXNCTR(value) ((SSC_RNCR_RXNCTR_Msk & ((value) << SSC_RNCR_RXNCTR_Pos)))
+/* -------- SSC_TNPR : (SSC Offset: 0x118) Transmit Next Pointer Register -------- */
+#define SSC_TNPR_TXNPTR_Pos 0
+#define SSC_TNPR_TXNPTR_Msk (0xffffffffu << SSC_TNPR_TXNPTR_Pos) /**< \brief (SSC_TNPR) Transmit Next Pointer */
+#define SSC_TNPR_TXNPTR(value) ((SSC_TNPR_TXNPTR_Msk & ((value) << SSC_TNPR_TXNPTR_Pos)))
+/* -------- SSC_TNCR : (SSC Offset: 0x11C) Transmit Next Counter Register -------- */
+#define SSC_TNCR_TXNCTR_Pos 0
+#define SSC_TNCR_TXNCTR_Msk (0xffffu << SSC_TNCR_TXNCTR_Pos) /**< \brief (SSC_TNCR) Transmit Counter Next */
+#define SSC_TNCR_TXNCTR(value) ((SSC_TNCR_TXNCTR_Msk & ((value) << SSC_TNCR_TXNCTR_Pos)))
+/* -------- SSC_PTCR : (SSC Offset: 0x120) Transfer Control Register -------- */
+#define SSC_PTCR_RXTEN (0x1u << 0) /**< \brief (SSC_PTCR) Receiver Transfer Enable */
+#define SSC_PTCR_RXTDIS (0x1u << 1) /**< \brief (SSC_PTCR) Receiver Transfer Disable */
+#define SSC_PTCR_TXTEN (0x1u << 8) /**< \brief (SSC_PTCR) Transmitter Transfer Enable */
+#define SSC_PTCR_TXTDIS (0x1u << 9) /**< \brief (SSC_PTCR) Transmitter Transfer Disable */
+/* -------- SSC_PTSR : (SSC Offset: 0x124) Transfer Status Register -------- */
+#define SSC_PTSR_RXTEN (0x1u << 0) /**< \brief (SSC_PTSR) Receiver Transfer Enable */
+#define SSC_PTSR_TXTEN (0x1u << 8) /**< \brief (SSC_PTSR) Transmitter Transfer Enable */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Supply Controller */
+/* ============================================================================= */
+/** \addtogroup SAM3S_SUPC Supply Controller */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Supc hardware registers */
+typedef struct {
+ WoReg SUPC_CR; /**< \brief (Supc Offset: 0x00) Supply Controller Control Register */
+ RwReg SUPC_SMMR; /**< \brief (Supc Offset: 0x04) Supply Controller Supply Monitor Mode Register */
+ RwReg SUPC_MR; /**< \brief (Supc Offset: 0x08) Supply Controller Mode Register */
+ RwReg SUPC_WUMR; /**< \brief (Supc Offset: 0x0C) Supply Controller Wake Up Mode Register */
+ RwReg SUPC_WUIR; /**< \brief (Supc Offset: 0x10) Supply Controller Wake Up Inputs Register */
+ RoReg SUPC_SR; /**< \brief (Supc Offset: 0x14) Supply Controller Status Register */
+} Supc;
+#endif /* __ASSEMBLY__ */
+/* -------- SUPC_CR : (SUPC Offset: 0x00) Supply Controller Control Register -------- */
+#define SUPC_CR_VROFF (0x1u << 2) /**< \brief (SUPC_CR) Voltage Regulator Off */
+#define SUPC_CR_VROFF_NO_EFFECT (0x0u << 2) /**< \brief (SUPC_CR) no effect. */
+#define SUPC_CR_VROFF_STOP_VREG (0x1u << 2) /**< \brief (SUPC_CR) if KEY is correct, asserts vddcore_nreset and stops the voltage regulator. */
+#define SUPC_CR_XTALSEL (0x1u << 3) /**< \brief (SUPC_CR) Crystal Oscillator Select */
+#define SUPC_CR_XTALSEL_NO_EFFECT (0x0u << 3) /**< \brief (SUPC_CR) no effect. */
+#define SUPC_CR_XTALSEL_CRYSTAL_SEL (0x1u << 3) /**< \brief (SUPC_CR) if KEY is correct, switches the slow clock on the crystal oscillator output. */
+#define SUPC_CR_KEY_Pos 24
+#define SUPC_CR_KEY_Msk (0xffu << SUPC_CR_KEY_Pos) /**< \brief (SUPC_CR) Password */
+#define SUPC_CR_KEY(value) ((uint32_t)(SUPC_CR_KEY_Msk & ((value) << SUPC_CR_KEY_Pos)))
+/* -------- SUPC_SMMR : (SUPC Offset: 0x04) Supply Controller Supply Monitor Mode Register -------- */
+#define SUPC_SMMR_SMTH_Pos 0
+#define SUPC_SMMR_SMTH_Msk (0xfu << SUPC_SMMR_SMTH_Pos) /**< \brief (SUPC_SMMR) Supply Monitor Threshold */
+#define SUPC_SMMR_SMTH_1_9V (0x0u << 0) /**< \brief (SUPC_SMMR) 1.9 V */
+#define SUPC_SMMR_SMTH_2_0V (0x1u << 0) /**< \brief (SUPC_SMMR) 2.0 V */
+#define SUPC_SMMR_SMTH_2_1V (0x2u << 0) /**< \brief (SUPC_SMMR) 2.1 V */
+#define SUPC_SMMR_SMTH_2_2V (0x3u << 0) /**< \brief (SUPC_SMMR) 2.2 V */
+#define SUPC_SMMR_SMTH_2_3V (0x4u << 0) /**< \brief (SUPC_SMMR) 2.3 V */
+#define SUPC_SMMR_SMTH_2_4V (0x5u << 0) /**< \brief (SUPC_SMMR) 2.4 V */
+#define SUPC_SMMR_SMTH_2_5V (0x6u << 0) /**< \brief (SUPC_SMMR) 2.5 V */
+#define SUPC_SMMR_SMTH_2_6V (0x7u << 0) /**< \brief (SUPC_SMMR) 2.6 V */
+#define SUPC_SMMR_SMTH_2_7V (0x8u << 0) /**< \brief (SUPC_SMMR) 2.7 V */
+#define SUPC_SMMR_SMTH_2_8V (0x9u << 0) /**< \brief (SUPC_SMMR) 2.8 V */
+#define SUPC_SMMR_SMTH_2_9V (0xAu << 0) /**< \brief (SUPC_SMMR) 2.9 V */
+#define SUPC_SMMR_SMTH_3_0V (0xBu << 0) /**< \brief (SUPC_SMMR) 3.0 V */
+#define SUPC_SMMR_SMTH_3_1V (0xCu << 0) /**< \brief (SUPC_SMMR) 3.1 V */
+#define SUPC_SMMR_SMTH_3_2V (0xDu << 0) /**< \brief (SUPC_SMMR) 3.2 V */
+#define SUPC_SMMR_SMTH_3_3V (0xEu << 0) /**< \brief (SUPC_SMMR) 3.3 V */
+#define SUPC_SMMR_SMTH_3_4V (0xFu << 0) /**< \brief (SUPC_SMMR) 3.4 V */
+#define SUPC_SMMR_SMSMPL_Pos 8
+#define SUPC_SMMR_SMSMPL_Msk (0x7u << SUPC_SMMR_SMSMPL_Pos) /**< \brief (SUPC_SMMR) Supply Monitor Sampling Period */
+#define SUPC_SMMR_SMSMPL_SMD (0x0u << 8) /**< \brief (SUPC_SMMR) Supply Monitor disabled */
+#define SUPC_SMMR_SMSMPL_CSM (0x1u << 8) /**< \brief (SUPC_SMMR) Continuous Supply Monitor */
+#define SUPC_SMMR_SMSMPL_32SLCK (0x2u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 32 SLCK periods */
+#define SUPC_SMMR_SMSMPL_256SLCK (0x3u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 256 SLCK periods */
+#define SUPC_SMMR_SMSMPL_2048SLCK (0x4u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 2,048 SLCK periods */
+#define SUPC_SMMR_SMRSTEN (0x1u << 12) /**< \brief (SUPC_SMMR) Supply Monitor Reset Enable */
+#define SUPC_SMMR_SMRSTEN_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_SMMR) the core reset signal "vddcore_nreset" is not affected when a supply monitor detection occurs. */
+#define SUPC_SMMR_SMRSTEN_ENABLE (0x1u << 12) /**< \brief (SUPC_SMMR) the core reset signal, vddcore_nreset is asserted when a supply monitor detection occurs. */
+#define SUPC_SMMR_SMIEN (0x1u << 13) /**< \brief (SUPC_SMMR) Supply Monitor Interrupt Enable */
+#define SUPC_SMMR_SMIEN_NOT_ENABLE (0x0u << 13) /**< \brief (SUPC_SMMR) the SUPC interrupt signal is not affected when a supply monitor detection occurs. */
+#define SUPC_SMMR_SMIEN_ENABLE (0x1u << 13) /**< \brief (SUPC_SMMR) the SUPC interrupt signal is asserted when a supply monitor detection occurs. */
+/* -------- SUPC_MR : (SUPC Offset: 0x08) Supply Controller Mode Register -------- */
+#define SUPC_MR_BODRSTEN (0x1u << 12) /**< \brief (SUPC_MR) Brownout Detector Reset Enable */
+#define SUPC_MR_BODRSTEN_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_MR) the core reset signal "vddcore_nreset" is not affected when a brownout detection occurs. */
+#define SUPC_MR_BODRSTEN_ENABLE (0x1u << 12) /**< \brief (SUPC_MR) the core reset signal, vddcore_nreset is asserted when a brownout detection occurs. */
+#define SUPC_MR_BODDIS (0x1u << 13) /**< \brief (SUPC_MR) Brownout Detector Disable */
+#define SUPC_MR_BODDIS_ENABLE (0x0u << 13) /**< \brief (SUPC_MR) the core brownout detector is enabled. */
+#define SUPC_MR_BODDIS_DISABLE (0x1u << 13) /**< \brief (SUPC_MR) the core brownout detector is disabled. */
+#define SUPC_MR_ONREG (0x1u << 14) /**< \brief (SUPC_MR) Voltage Regulator enable */
+#define SUPC_MR_ONREG_ONREG_UNUSED (0x0u << 14) /**< \brief (SUPC_MR) Voltage Regulator is not used */
+#define SUPC_MR_ONREG_ONREG_USED (0x1u << 14) /**< \brief (SUPC_MR) Voltage Regulator is used */
+#define SUPC_MR_OSCBYPASS (0x1u << 20) /**< \brief (SUPC_MR) Oscillator Bypass */
+#define SUPC_MR_OSCBYPASS_NO_EFFECT (0x0u << 20) /**< \brief (SUPC_MR) no effect. Clock selection depends on XTALSEL value. */
+#define SUPC_MR_OSCBYPASS_BYPASS (0x1u << 20) /**< \brief (SUPC_MR) the 32-KHz XTAL oscillator is selected and is put in bypass mode. */
+#define SUPC_MR_KEY_Pos 24
+#define SUPC_MR_KEY_Msk (0xffu << SUPC_MR_KEY_Pos) /**< \brief (SUPC_MR) Password Key */
+#define SUPC_MR_KEY(value) ((SUPC_MR_KEY_Msk & ((value) << SUPC_MR_KEY_Pos)))
+/* -------- SUPC_WUMR : (SUPC Offset: 0x0C) Supply Controller Wake Up Mode Register -------- */
+#define SUPC_WUMR_SMEN (0x1u << 1) /**< \brief (SUPC_WUMR) Supply Monitor Wake Up Enable */
+#define SUPC_WUMR_SMEN_NOT_ENABLE (0x0u << 1) /**< \brief (SUPC_WUMR) the supply monitor detection has no wake up effect. */
+#define SUPC_WUMR_SMEN_ENABLE (0x1u << 1) /**< \brief (SUPC_WUMR) the supply monitor detection forces the wake up of the core power supply. */
+#define SUPC_WUMR_RTTEN (0x1u << 2) /**< \brief (SUPC_WUMR) Real Time Timer Wake Up Enable */
+#define SUPC_WUMR_RTTEN_NOT_ENABLE (0x0u << 2) /**< \brief (SUPC_WUMR) the RTT alarm signal has no wake up effect. */
+#define SUPC_WUMR_RTTEN_ENABLE (0x1u << 2) /**< \brief (SUPC_WUMR) the RTT alarm signal forces the wake up of the core power supply. */
+#define SUPC_WUMR_RTCEN (0x1u << 3) /**< \brief (SUPC_WUMR) Real Time Clock Wake Up Enable */
+#define SUPC_WUMR_RTCEN_NOT_ENABLE (0x0u << 3) /**< \brief (SUPC_WUMR) the RTC alarm signal has no wake up effect. */
+#define SUPC_WUMR_RTCEN_ENABLE (0x1u << 3) /**< \brief (SUPC_WUMR) the RTC alarm signal forces the wake up of the core power supply. */
+#define SUPC_WUMR_WKUPDBC_Pos 12
+#define SUPC_WUMR_WKUPDBC_Msk (0x7u << SUPC_WUMR_WKUPDBC_Pos) /**< \brief (SUPC_WUMR) Wake Up Inputs Debouncer Period */
+#define SUPC_WUMR_WKUPDBC_IMMEDIATE (0x0u << 12) /**< \brief (SUPC_WUMR) Immediate, no debouncing, detected active at least on one Slow Clock edge. */
+#define SUPC_WUMR_WKUPDBC_3_SCLK (0x1u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 3 SLCK periods */
+#define SUPC_WUMR_WKUPDBC_32_SCLK (0x2u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 32 SLCK periods */
+#define SUPC_WUMR_WKUPDBC_512_SCLK (0x3u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 512 SLCK periods */
+#define SUPC_WUMR_WKUPDBC_4096_SCLK (0x4u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 4,096 SLCK periods */
+#define SUPC_WUMR_WKUPDBC_32768_SCLK (0x5u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 32,768 SLCK periods */
+/* -------- SUPC_WUIR : (SUPC Offset: 0x10) Supply Controller Wake Up Inputs Register -------- */
+#define SUPC_WUIR_WKUPEN0 (0x1u << 0) /**< \brief (SUPC_WUIR) Wake Up Input Enable 0 */
+#define SUPC_WUIR_WKUPEN0_NOT_ENABLE (0x0u << 0) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN0_ENABLE (0x1u << 0) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN1 (0x1u << 1) /**< \brief (SUPC_WUIR) Wake Up Input Enable 1 */
+#define SUPC_WUIR_WKUPEN1_NOT_ENABLE (0x0u << 1) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN1_ENABLE (0x1u << 1) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN2 (0x1u << 2) /**< \brief (SUPC_WUIR) Wake Up Input Enable 2 */
+#define SUPC_WUIR_WKUPEN2_NOT_ENABLE (0x0u << 2) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN2_ENABLE (0x1u << 2) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN3 (0x1u << 3) /**< \brief (SUPC_WUIR) Wake Up Input Enable 3 */
+#define SUPC_WUIR_WKUPEN3_NOT_ENABLE (0x0u << 3) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN3_ENABLE (0x1u << 3) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN4 (0x1u << 4) /**< \brief (SUPC_WUIR) Wake Up Input Enable 4 */
+#define SUPC_WUIR_WKUPEN4_NOT_ENABLE (0x0u << 4) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN4_ENABLE (0x1u << 4) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN5 (0x1u << 5) /**< \brief (SUPC_WUIR) Wake Up Input Enable 5 */
+#define SUPC_WUIR_WKUPEN5_NOT_ENABLE (0x0u << 5) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN5_ENABLE (0x1u << 5) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN6 (0x1u << 6) /**< \brief (SUPC_WUIR) Wake Up Input Enable 6 */
+#define SUPC_WUIR_WKUPEN6_NOT_ENABLE (0x0u << 6) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN6_ENABLE (0x1u << 6) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN7 (0x1u << 7) /**< \brief (SUPC_WUIR) Wake Up Input Enable 7 */
+#define SUPC_WUIR_WKUPEN7_NOT_ENABLE (0x0u << 7) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN7_ENABLE (0x1u << 7) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN8 (0x1u << 8) /**< \brief (SUPC_WUIR) Wake Up Input Enable 8 */
+#define SUPC_WUIR_WKUPEN8_NOT_ENABLE (0x0u << 8) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN8_ENABLE (0x1u << 8) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN9 (0x1u << 9) /**< \brief (SUPC_WUIR) Wake Up Input Enable 9 */
+#define SUPC_WUIR_WKUPEN9_NOT_ENABLE (0x0u << 9) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN9_ENABLE (0x1u << 9) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN10 (0x1u << 10) /**< \brief (SUPC_WUIR) Wake Up Input Enable 10 */
+#define SUPC_WUIR_WKUPEN10_NOT_ENABLE (0x0u << 10) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN10_ENABLE (0x1u << 10) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN11 (0x1u << 11) /**< \brief (SUPC_WUIR) Wake Up Input Enable 11 */
+#define SUPC_WUIR_WKUPEN11_NOT_ENABLE (0x0u << 11) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN11_ENABLE (0x1u << 11) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN12 (0x1u << 12) /**< \brief (SUPC_WUIR) Wake Up Input Enable 12 */
+#define SUPC_WUIR_WKUPEN12_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN12_ENABLE (0x1u << 12) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN13 (0x1u << 13) /**< \brief (SUPC_WUIR) Wake Up Input Enable 13 */
+#define SUPC_WUIR_WKUPEN13_NOT_ENABLE (0x0u << 13) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN13_ENABLE (0x1u << 13) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN14 (0x1u << 14) /**< \brief (SUPC_WUIR) Wake Up Input Enable 14 */
+#define SUPC_WUIR_WKUPEN14_NOT_ENABLE (0x0u << 14) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN14_ENABLE (0x1u << 14) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPEN15 (0x1u << 15) /**< \brief (SUPC_WUIR) Wake Up Input Enable 15 */
+#define SUPC_WUIR_WKUPEN15_NOT_ENABLE (0x0u << 15) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */
+#define SUPC_WUIR_WKUPEN15_ENABLE (0x1u << 15) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT0 (0x1u << 16) /**< \brief (SUPC_WUIR) Wake Up Input Transition 0 */
+#define SUPC_WUIR_WKUPT0_HIGH_TO_LOW (0x0u << 16) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT0_LOW_TO_HIGH (0x1u << 16) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT1 (0x1u << 17) /**< \brief (SUPC_WUIR) Wake Up Input Transition 1 */
+#define SUPC_WUIR_WKUPT1_HIGH_TO_LOW (0x0u << 17) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT1_LOW_TO_HIGH (0x1u << 17) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT2 (0x1u << 18) /**< \brief (SUPC_WUIR) Wake Up Input Transition 2 */
+#define SUPC_WUIR_WKUPT2_HIGH_TO_LOW (0x0u << 18) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT2_LOW_TO_HIGH (0x1u << 18) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT3 (0x1u << 19) /**< \brief (SUPC_WUIR) Wake Up Input Transition 3 */
+#define SUPC_WUIR_WKUPT3_HIGH_TO_LOW (0x0u << 19) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT3_LOW_TO_HIGH (0x1u << 19) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT4 (0x1u << 20) /**< \brief (SUPC_WUIR) Wake Up Input Transition 4 */
+#define SUPC_WUIR_WKUPT4_HIGH_TO_LOW (0x0u << 20) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT4_LOW_TO_HIGH (0x1u << 20) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT5 (0x1u << 21) /**< \brief (SUPC_WUIR) Wake Up Input Transition 5 */
+#define SUPC_WUIR_WKUPT5_HIGH_TO_LOW (0x0u << 21) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT5_LOW_TO_HIGH (0x1u << 21) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT6 (0x1u << 22) /**< \brief (SUPC_WUIR) Wake Up Input Transition 6 */
+#define SUPC_WUIR_WKUPT6_HIGH_TO_LOW (0x0u << 22) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT6_LOW_TO_HIGH (0x1u << 22) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT7 (0x1u << 23) /**< \brief (SUPC_WUIR) Wake Up Input Transition 7 */
+#define SUPC_WUIR_WKUPT7_HIGH_TO_LOW (0x0u << 23) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT7_LOW_TO_HIGH (0x1u << 23) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT8 (0x1u << 24) /**< \brief (SUPC_WUIR) Wake Up Input Transition 8 */
+#define SUPC_WUIR_WKUPT8_HIGH_TO_LOW (0x0u << 24) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT8_LOW_TO_HIGH (0x1u << 24) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT9 (0x1u << 25) /**< \brief (SUPC_WUIR) Wake Up Input Transition 9 */
+#define SUPC_WUIR_WKUPT9_HIGH_TO_LOW (0x0u << 25) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT9_LOW_TO_HIGH (0x1u << 25) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT10 (0x1u << 26) /**< \brief (SUPC_WUIR) Wake Up Input Transition 10 */
+#define SUPC_WUIR_WKUPT10_HIGH_TO_LOW (0x0u << 26) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT10_LOW_TO_HIGH (0x1u << 26) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT11 (0x1u << 27) /**< \brief (SUPC_WUIR) Wake Up Input Transition 11 */
+#define SUPC_WUIR_WKUPT11_HIGH_TO_LOW (0x0u << 27) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT11_LOW_TO_HIGH (0x1u << 27) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT12 (0x1u << 28) /**< \brief (SUPC_WUIR) Wake Up Input Transition 12 */
+#define SUPC_WUIR_WKUPT12_HIGH_TO_LOW (0x0u << 28) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT12_LOW_TO_HIGH (0x1u << 28) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT13 (0x1u << 29) /**< \brief (SUPC_WUIR) Wake Up Input Transition 13 */
+#define SUPC_WUIR_WKUPT13_HIGH_TO_LOW (0x0u << 29) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT13_LOW_TO_HIGH (0x1u << 29) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT14 (0x1u << 30) /**< \brief (SUPC_WUIR) Wake Up Input Transition 14 */
+#define SUPC_WUIR_WKUPT14_HIGH_TO_LOW (0x0u << 30) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT14_LOW_TO_HIGH (0x1u << 30) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT15 (0x1u << 31) /**< \brief (SUPC_WUIR) Wake Up Input Transition 15 */
+#define SUPC_WUIR_WKUPT15_HIGH_TO_LOW (0x0u << 31) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+#define SUPC_WUIR_WKUPT15_LOW_TO_HIGH (0x1u << 31) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */
+/* -------- SUPC_SR : (SUPC Offset: 0x14) Supply Controller Status Register -------- */
+#define SUPC_SR_WKUPS (0x1u << 1) /**< \brief (SUPC_SR) WKUP Wake Up Status */
+#define SUPC_SR_WKUPS_NO (0x0u << 1) /**< \brief (SUPC_SR) no wake up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR. */
+#define SUPC_SR_WKUPS_PRESENT (0x1u << 1) /**< \brief (SUPC_SR) at least one wake up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR. */
+#define SUPC_SR_SMWS (0x1u << 2) /**< \brief (SUPC_SR) Supply Monitor Detection Wake Up Status */
+#define SUPC_SR_SMWS_NO (0x0u << 2) /**< \brief (SUPC_SR) no wake up due to a supply monitor detection has occurred since the last read of SUPC_SR. */
+#define SUPC_SR_SMWS_PRESENT (0x1u << 2) /**< \brief (SUPC_SR) at least one wake up due to a supply monitor detection has occurred since the last read of SUPC_SR. */
+#define SUPC_SR_BODRSTS (0x1u << 3) /**< \brief (SUPC_SR) Brownout Detector Reset Status */
+#define SUPC_SR_BODRSTS_NO (0x0u << 3) /**< \brief (SUPC_SR) no core brownout rising edge event has been detected since the last read of the SUPC_SR. */
+#define SUPC_SR_BODRSTS_PRESENT (0x1u << 3) /**< \brief (SUPC_SR) at least one brownout output rising edge event has been detected since the last read of the SUPC_SR. */
+#define SUPC_SR_SMRSTS (0x1u << 4) /**< \brief (SUPC_SR) Supply Monitor Reset Status */
+#define SUPC_SR_SMRSTS_NO (0x0u << 4) /**< \brief (SUPC_SR) no supply monitor detection has generated a core reset since the last read of the SUPC_SR. */
+#define SUPC_SR_SMRSTS_PRESENT (0x1u << 4) /**< \brief (SUPC_SR) at least one supply monitor detection has generated a core reset since the last read of the SUPC_SR. */
+#define SUPC_SR_SMS (0x1u << 5) /**< \brief (SUPC_SR) Supply Monitor Status */
+#define SUPC_SR_SMS_NO (0x0u << 5) /**< \brief (SUPC_SR) no supply monitor detection since the last read of SUPC_SR. */
+#define SUPC_SR_SMS_PRESENT (0x1u << 5) /**< \brief (SUPC_SR) at least one supply monitor detection since the last read of SUPC_SR. */
+#define SUPC_SR_SMOS (0x1u << 6) /**< \brief (SUPC_SR) Supply Monitor Output Status */
+#define SUPC_SR_SMOS_HIGH (0x0u << 6) /**< \brief (SUPC_SR) the supply monitor detected VDDIO higher than its threshold at its last measurement. */
+#define SUPC_SR_SMOS_LOW (0x1u << 6) /**< \brief (SUPC_SR) the supply monitor detected VDDIO lower than its threshold at its last measurement. */
+#define SUPC_SR_OSCSEL (0x1u << 7) /**< \brief (SUPC_SR) 32-kHz Oscillator Selection Status */
+#define SUPC_SR_OSCSEL_RC (0x0u << 7) /**< \brief (SUPC_SR) the slow clock, SLCK is generated by the embedded 32-kHz RC oscillator. */
+#define SUPC_SR_OSCSEL_CRYST (0x1u << 7) /**< \brief (SUPC_SR) the slow clock, SLCK is generated by the 32-kHz crystal oscillator. */
+#define SUPC_SR_WKUPIS0 (0x1u << 16) /**< \brief (SUPC_SR) WKUP Input Status 0 */
+#define SUPC_SR_WKUPIS0_DIS (0x0u << 16) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS0_EN (0x1u << 16) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS1 (0x1u << 17) /**< \brief (SUPC_SR) WKUP Input Status 1 */
+#define SUPC_SR_WKUPIS1_DIS (0x0u << 17) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS1_EN (0x1u << 17) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS2 (0x1u << 18) /**< \brief (SUPC_SR) WKUP Input Status 2 */
+#define SUPC_SR_WKUPIS2_DIS (0x0u << 18) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS2_EN (0x1u << 18) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS3 (0x1u << 19) /**< \brief (SUPC_SR) WKUP Input Status 3 */
+#define SUPC_SR_WKUPIS3_DIS (0x0u << 19) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS3_EN (0x1u << 19) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS4 (0x1u << 20) /**< \brief (SUPC_SR) WKUP Input Status 4 */
+#define SUPC_SR_WKUPIS4_DIS (0x0u << 20) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS4_EN (0x1u << 20) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS5 (0x1u << 21) /**< \brief (SUPC_SR) WKUP Input Status 5 */
+#define SUPC_SR_WKUPIS5_DIS (0x0u << 21) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS5_EN (0x1u << 21) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS6 (0x1u << 22) /**< \brief (SUPC_SR) WKUP Input Status 6 */
+#define SUPC_SR_WKUPIS6_DIS (0x0u << 22) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS6_EN (0x1u << 22) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS7 (0x1u << 23) /**< \brief (SUPC_SR) WKUP Input Status 7 */
+#define SUPC_SR_WKUPIS7_DIS (0x0u << 23) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS7_EN (0x1u << 23) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS8 (0x1u << 24) /**< \brief (SUPC_SR) WKUP Input Status 8 */
+#define SUPC_SR_WKUPIS8_DIS (0x0u << 24) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS8_EN (0x1u << 24) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS9 (0x1u << 25) /**< \brief (SUPC_SR) WKUP Input Status 9 */
+#define SUPC_SR_WKUPIS9_DIS (0x0u << 25) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS9_EN (0x1u << 25) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS10 (0x1u << 26) /**< \brief (SUPC_SR) WKUP Input Status 10 */
+#define SUPC_SR_WKUPIS10_DIS (0x0u << 26) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS10_EN (0x1u << 26) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS11 (0x1u << 27) /**< \brief (SUPC_SR) WKUP Input Status 11 */
+#define SUPC_SR_WKUPIS11_DIS (0x0u << 27) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS11_EN (0x1u << 27) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS12 (0x1u << 28) /**< \brief (SUPC_SR) WKUP Input Status 12 */
+#define SUPC_SR_WKUPIS12_DIS (0x0u << 28) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS12_EN (0x1u << 28) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS13 (0x1u << 29) /**< \brief (SUPC_SR) WKUP Input Status 13 */
+#define SUPC_SR_WKUPIS13_DIS (0x0u << 29) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS13_EN (0x1u << 29) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS14 (0x1u << 30) /**< \brief (SUPC_SR) WKUP Input Status 14 */
+#define SUPC_SR_WKUPIS14_DIS (0x0u << 30) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS14_EN (0x1u << 30) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS15 (0x1u << 31) /**< \brief (SUPC_SR) WKUP Input Status 15 */
+#define SUPC_SR_WKUPIS15_DIS (0x0u << 31) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */
+#define SUPC_SR_WKUPIS15_EN (0x1u << 31) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Timer Counter */
+/* ============================================================================= */
+/** \addtogroup SAM3S_TC Timer Counter */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief TcChannel hardware registers */
+typedef struct {
+ RwReg TC_CCR; /**< \brief (TcChannel Offset: 0x0) Channel Control Register */
+ RwReg TC_CMR; /**< \brief (TcChannel Offset: 0x4) Channel Mode Register */
+ RwReg TC_SMMR; /**< \brief (TcChannel Offset: 0x8) Stepper Motor Mode Register */
+ RwReg Reserved1[1];
+ RwReg TC_CV; /**< \brief (TcChannel Offset: 0x10) Counter Value */
+ RwReg TC_RA; /**< \brief (TcChannel Offset: 0x14) Register A */
+ RwReg TC_RB; /**< \brief (TcChannel Offset: 0x18) Register B */
+ RwReg TC_RC; /**< \brief (TcChannel Offset: 0x1C) Register C */
+ RwReg TC_SR; /**< \brief (TcChannel Offset: 0x20) Status Register */
+ RwReg TC_IER; /**< \brief (TcChannel Offset: 0x24) Interrupt Enable Register */
+ RwReg TC_IDR; /**< \brief (TcChannel Offset: 0x28) Interrupt Disable Register */
+ RwReg TC_IMR; /**< \brief (TcChannel Offset: 0x2C) Interrupt Mask Register */
+ RwReg Reserved2[4];
+} TcChannel;
+/** \brief Tc hardware registers */
+typedef struct {
+ TcChannel TC_CHANNEL[3]; /**< \brief (Tc Offset: 0x0) channel = 0 .. 2 */
+ WoReg TC_BCR; /**< \brief (Tc Offset: 0xC0) Block Control Register */
+ RwReg TC_BMR; /**< \brief (Tc Offset: 0xC4) Block Mode Register */
+ WoReg TC_QIER; /**< \brief (Tc Offset: 0xC8) QDEC Interrupt Enable Register */
+ WoReg TC_QIDR; /**< \brief (Tc Offset: 0xCC) QDEC Interrupt Disable Register */
+ RoReg TC_QIMR; /**< \brief (Tc Offset: 0xD0) QDEC Interrupt Mask Register */
+ RoReg TC_QISR; /**< \brief (Tc Offset: 0xD4) QDEC Interrupt Status Register */
+ RwReg TC_FMR; /**< \brief (Tc Offset: 0xD8) Fault Mode Register */
+ RwReg Reserved1[2];
+ RwReg TC_WPMR; /**< \brief (Tc Offset: 0xE4) Write Protect Mode Register */
+} Tc;
+#endif /* __ASSEMBLY__ */
+/* -------- TC_CCR : (TC Offset: N/A) Channel Control Register -------- */
+#define TC_CCR_CLKEN (0x1u << 0) /**< \brief (TC_CCR) Counter Clock Enable Command */
+#define TC_CCR_CLKDIS (0x1u << 1) /**< \brief (TC_CCR) Counter Clock Disable Command */
+#define TC_CCR_SWTRG (0x1u << 2) /**< \brief (TC_CCR) Software Trigger Command */
+/* -------- TC_CMR : (TC Offset: N/A) Channel Mode Register -------- */
+#define TC_CMR_TCCLKS_Pos 0
+#define TC_CMR_TCCLKS_Msk (0x7u << TC_CMR_TCCLKS_Pos) /**< \brief (TC_CMR) Clock Selection */
+#define TC_CMR_TCCLKS_TIMER_CLOCK1 (0x0u << 0) /**< \brief (TC_CMR) Clock selected: TCLK1 */
+#define TC_CMR_TCCLKS_TIMER_CLOCK2 (0x1u << 0) /**< \brief (TC_CMR) Clock selected: TCLK2 */
+#define TC_CMR_TCCLKS_TIMER_CLOCK3 (0x2u << 0) /**< \brief (TC_CMR) Clock selected: TCLK3 */
+#define TC_CMR_TCCLKS_TIMER_CLOCK4 (0x3u << 0) /**< \brief (TC_CMR) Clock selected: TCLK4 */
+#define TC_CMR_TCCLKS_TIMER_CLOCK5 (0x4u << 0) /**< \brief (TC_CMR) Clock selected: TCLK5 */
+#define TC_CMR_TCCLKS_XC0 (0x5u << 0) /**< \brief (TC_CMR) Clock selected: XC0 */
+#define TC_CMR_TCCLKS_XC1 (0x6u << 0) /**< \brief (TC_CMR) Clock selected: XC1 */
+#define TC_CMR_TCCLKS_XC2 (0x7u << 0) /**< \brief (TC_CMR) Clock selected: XC2 */
+#define TC_CMR_CLKI (0x1u << 3) /**< \brief (TC_CMR) Clock Invert */
+#define TC_CMR_BURST_Pos 4
+#define TC_CMR_BURST_Msk (0x3u << TC_CMR_BURST_Pos) /**< \brief (TC_CMR) Burst Signal Selection */
+#define TC_CMR_BURST_NONE (0x0u << 4) /**< \brief (TC_CMR) The clock is not gated by an external signal. */
+#define TC_CMR_BURST_XC0 (0x1u << 4) /**< \brief (TC_CMR) XC0 is ANDed with the selected clock. */
+#define TC_CMR_BURST_XC1 (0x2u << 4) /**< \brief (TC_CMR) XC1 is ANDed with the selected clock. */
+#define TC_CMR_BURST_XC2 (0x3u << 4) /**< \brief (TC_CMR) XC2 is ANDed with the selected clock. */
+#define TC_CMR_LDBSTOP (0x1u << 6) /**< \brief (TC_CMR) Counter Clock Stopped with RB Loading */
+#define TC_CMR_LDBDIS (0x1u << 7) /**< \brief (TC_CMR) Counter Clock Disable with RB Loading */
+#define TC_CMR_ETRGEDG_Pos 8
+#define TC_CMR_ETRGEDG_Msk (0x3u << TC_CMR_ETRGEDG_Pos) /**< \brief (TC_CMR) External Trigger Edge Selection */
+#define TC_CMR_ETRGEDG_NONE (0x0u << 8) /**< \brief (TC_CMR) The clock is not gated by an external signal. */
+#define TC_CMR_ETRGEDG_RISING (0x1u << 8) /**< \brief (TC_CMR) Rising edge */
+#define TC_CMR_ETRGEDG_FALLING (0x2u << 8) /**< \brief (TC_CMR) Falling edge */
+#define TC_CMR_ETRGEDG_EDGE (0x3u << 8) /**< \brief (TC_CMR) Each edge */
+#define TC_CMR_ABETRG (0x1u << 10) /**< \brief (TC_CMR) TIOA or TIOB External Trigger Selection */
+#define TC_CMR_CPCTRG (0x1u << 14) /**< \brief (TC_CMR) RC Compare Trigger Enable */
+#define TC_CMR_WAVE (0x1u << 15) /**< \brief (TC_CMR) */
+#define TC_CMR_LDRA_Pos 16
+#define TC_CMR_LDRA_Msk (0x3u << TC_CMR_LDRA_Pos) /**< \brief (TC_CMR) RA Loading Selection */
+#define TC_CMR_LDRA_NONE (0x0u << 16) /**< \brief (TC_CMR) None */
+#define TC_CMR_LDRA_RISING (0x1u << 16) /**< \brief (TC_CMR) Rising edge of TIOA */
+#define TC_CMR_LDRA_FALLING (0x2u << 16) /**< \brief (TC_CMR) Falling edge of TIOA */
+#define TC_CMR_LDRA_EDGE (0x3u << 16) /**< \brief (TC_CMR) Each edge of TIOA */
+#define TC_CMR_LDRB_Pos 18
+#define TC_CMR_LDRB_Msk (0x3u << TC_CMR_LDRB_Pos) /**< \brief (TC_CMR) RB Loading Selection */
+#define TC_CMR_LDRB_NONE (0x0u << 18) /**< \brief (TC_CMR) None */
+#define TC_CMR_LDRB_RISING (0x1u << 18) /**< \brief (TC_CMR) Rising edge of TIOA */
+#define TC_CMR_LDRB_FALLING (0x2u << 18) /**< \brief (TC_CMR) Falling edge of TIOA */
+#define TC_CMR_LDRB_EDGE (0x3u << 18) /**< \brief (TC_CMR) Each edge of TIOA */
+#define TC_CMR_CPCSTOP (0x1u << 6) /**< \brief (TC_CMR) Counter Clock Stopped with RC Compare */
+#define TC_CMR_CPCDIS (0x1u << 7) /**< \brief (TC_CMR) Counter Clock Disable with RC Compare */
+#define TC_CMR_EEVTEDG_Pos 8
+#define TC_CMR_EEVTEDG_Msk (0x3u << TC_CMR_EEVTEDG_Pos) /**< \brief (TC_CMR) External Event Edge Selection */
+#define TC_CMR_EEVTEDG_NONE (0x0u << 8) /**< \brief (TC_CMR) None */
+#define TC_CMR_EEVTEDG_RISING (0x1u << 8) /**< \brief (TC_CMR) Rising edge */
+#define TC_CMR_EEVTEDG_FALLING (0x2u << 8) /**< \brief (TC_CMR) Falling edge */
+#define TC_CMR_EEVTEDG_EDGE (0x3u << 8) /**< \brief (TC_CMR) Each edge */
+#define TC_CMR_EEVT_Pos 10
+#define TC_CMR_EEVT_Msk (0x3u << TC_CMR_EEVT_Pos) /**< \brief (TC_CMR) External Event Selection */
+#define TC_CMR_EEVT_TIOB (0x0u << 10) /**< \brief (TC_CMR) TIOB */
+#define TC_CMR_EEVT_XC0 (0x1u << 10) /**< \brief (TC_CMR) XC0 */
+#define TC_CMR_EEVT_XC1 (0x2u << 10) /**< \brief (TC_CMR) XC1 */
+#define TC_CMR_EEVT_XC2 (0x3u << 10) /**< \brief (TC_CMR) XC2 */
+#define TC_CMR_ENETRG (0x1u << 12) /**< \brief (TC_CMR) External Event Trigger Enable */
+#define TC_CMR_WAVSEL_Pos 13
+#define TC_CMR_WAVSEL_Msk (0x3u << TC_CMR_WAVSEL_Pos) /**< \brief (TC_CMR) Waveform Selection */
+#define TC_CMR_WAVSEL_UP (0x0u << 13) /**< \brief (TC_CMR) UP mode without automatic trigger on RC Compare */
+#define TC_CMR_WAVSEL_UPDOWN (0x1u << 13) /**< \brief (TC_CMR) UPDOWN mode without automatic trigger on RC Compare */
+#define TC_CMR_WAVSEL_UP_RC (0x2u << 13) /**< \brief (TC_CMR) UP mode with automatic trigger on RC Compare */
+#define TC_CMR_WAVSEL_UPDOWN_RC (0x3u << 13) /**< \brief (TC_CMR) UPDOWN mode with automatic trigger on RC Compare */
+#define TC_CMR_ACPA_Pos 16
+#define TC_CMR_ACPA_Msk (0x3u << TC_CMR_ACPA_Pos) /**< \brief (TC_CMR) RA Compare Effect on TIOA */
+#define TC_CMR_ACPA_NONE (0x0u << 16) /**< \brief (TC_CMR) None */
+#define TC_CMR_ACPA_SET (0x1u << 16) /**< \brief (TC_CMR) Set */
+#define TC_CMR_ACPA_CLEAR (0x2u << 16) /**< \brief (TC_CMR) Clear */
+#define TC_CMR_ACPA_TOGGLE (0x3u << 16) /**< \brief (TC_CMR) Toggle */
+#define TC_CMR_ACPC_Pos 18
+#define TC_CMR_ACPC_Msk (0x3u << TC_CMR_ACPC_Pos) /**< \brief (TC_CMR) RC Compare Effect on TIOA */
+#define TC_CMR_ACPC_NONE (0x0u << 18) /**< \brief (TC_CMR) None */
+#define TC_CMR_ACPC_SET (0x1u << 18) /**< \brief (TC_CMR) Set */
+#define TC_CMR_ACPC_CLEAR (0x2u << 18) /**< \brief (TC_CMR) Clear */
+#define TC_CMR_ACPC_TOGGLE (0x3u << 18) /**< \brief (TC_CMR) Toggle */
+#define TC_CMR_AEEVT_Pos 20
+#define TC_CMR_AEEVT_Msk (0x3u << TC_CMR_AEEVT_Pos) /**< \brief (TC_CMR) External Event Effect on TIOA */
+#define TC_CMR_AEEVT_NONE (0x0u << 20) /**< \brief (TC_CMR) None */
+#define TC_CMR_AEEVT_SET (0x1u << 20) /**< \brief (TC_CMR) Set */
+#define TC_CMR_AEEVT_CLEAR (0x2u << 20) /**< \brief (TC_CMR) Clear */
+#define TC_CMR_AEEVT_TOGGLE (0x3u << 20) /**< \brief (TC_CMR) Toggle */
+#define TC_CMR_ASWTRG_Pos 22
+#define TC_CMR_ASWTRG_Msk (0x3u << TC_CMR_ASWTRG_Pos) /**< \brief (TC_CMR) Software Trigger Effect on TIOA */
+#define TC_CMR_ASWTRG_NONE (0x0u << 22) /**< \brief (TC_CMR) None */
+#define TC_CMR_ASWTRG_SET (0x1u << 22) /**< \brief (TC_CMR) Set */
+#define TC_CMR_ASWTRG_CLEAR (0x2u << 22) /**< \brief (TC_CMR) Clear */
+#define TC_CMR_ASWTRG_TOGGLE (0x3u << 22) /**< \brief (TC_CMR) Toggle */
+#define TC_CMR_BCPB_Pos 24
+#define TC_CMR_BCPB_Msk (0x3u << TC_CMR_BCPB_Pos) /**< \brief (TC_CMR) RB Compare Effect on TIOB */
+#define TC_CMR_BCPB_NONE (0x0u << 24) /**< \brief (TC_CMR) None */
+#define TC_CMR_BCPB_SET (0x1u << 24) /**< \brief (TC_CMR) Set */
+#define TC_CMR_BCPB_CLEAR (0x2u << 24) /**< \brief (TC_CMR) Clear */
+#define TC_CMR_BCPB_TOGGLE (0x3u << 24) /**< \brief (TC_CMR) Toggle */
+#define TC_CMR_BCPC_Pos 26
+#define TC_CMR_BCPC_Msk (0x3u << TC_CMR_BCPC_Pos) /**< \brief (TC_CMR) RC Compare Effect on TIOB */
+#define TC_CMR_BCPC_NONE (0x0u << 26) /**< \brief (TC_CMR) None */
+#define TC_CMR_BCPC_SET (0x1u << 26) /**< \brief (TC_CMR) Set */
+#define TC_CMR_BCPC_CLEAR (0x2u << 26) /**< \brief (TC_CMR) Clear */
+#define TC_CMR_BCPC_TOGGLE (0x3u << 26) /**< \brief (TC_CMR) Toggle */
+#define TC_CMR_BEEVT_Pos 28
+#define TC_CMR_BEEVT_Msk (0x3u << TC_CMR_BEEVT_Pos) /**< \brief (TC_CMR) External Event Effect on TIOB */
+#define TC_CMR_BEEVT_NONE (0x0u << 28) /**< \brief (TC_CMR) None */
+#define TC_CMR_BEEVT_SET (0x1u << 28) /**< \brief (TC_CMR) Set */
+#define TC_CMR_BEEVT_CLEAR (0x2u << 28) /**< \brief (TC_CMR) Clear */
+#define TC_CMR_BEEVT_TOGGLE (0x3u << 28) /**< \brief (TC_CMR) Toggle */
+#define TC_CMR_BSWTRG_Pos 30
+#define TC_CMR_BSWTRG_Msk (0x3u << TC_CMR_BSWTRG_Pos) /**< \brief (TC_CMR) Software Trigger Effect on TIOB */
+#define TC_CMR_BSWTRG_NONE (0x0u << 30) /**< \brief (TC_CMR) None */
+#define TC_CMR_BSWTRG_SET (0x1u << 30) /**< \brief (TC_CMR) Set */
+#define TC_CMR_BSWTRG_CLEAR (0x2u << 30) /**< \brief (TC_CMR) Clear */
+#define TC_CMR_BSWTRG_TOGGLE (0x3u << 30) /**< \brief (TC_CMR) Toggle */
+/* -------- TC_SMMR : (TC Offset: N/A) Stepper Motor Mode Register -------- */
+#define TC_SMMR_GCEN (0x1u << 0) /**< \brief (TC_SMMR) Gray Count Enable */
+#define TC_SMMR_DOWN (0x1u << 1) /**< \brief (TC_SMMR) DOWN Count */
+/* -------- TC_CV : (TC Offset: N/A) Counter Value -------- */
+#define TC_CV_CV_Pos 0
+#define TC_CV_CV_Msk (0xffffu << TC_CV_CV_Pos) /**< \brief (TC_CV) Counter Value */
+/* -------- TC_RA : (TC Offset: N/A) Register A -------- */
+#define TC_RA_RA_Pos 0
+#define TC_RA_RA_Msk (0xffffu << TC_RA_RA_Pos) /**< \brief (TC_RA) Register A */
+#define TC_RA_RA(value) ((TC_RA_RA_Msk & ((value) << TC_RA_RA_Pos)))
+/* -------- TC_RB : (TC Offset: N/A) Register B -------- */
+#define TC_RB_RB_Pos 0
+#define TC_RB_RB_Msk (0xffffu << TC_RB_RB_Pos) /**< \brief (TC_RB) Register B */
+#define TC_RB_RB(value) ((TC_RB_RB_Msk & ((value) << TC_RB_RB_Pos)))
+/* -------- TC_RC : (TC Offset: N/A) Register C -------- */
+#define TC_RC_RC_Pos 0
+#define TC_RC_RC_Msk (0xffffu << TC_RC_RC_Pos) /**< \brief (TC_RC) Register C */
+#define TC_RC_RC(value) ((TC_RC_RC_Msk & ((value) << TC_RC_RC_Pos)))
+/* -------- TC_SR : (TC Offset: N/A) Status Register -------- */
+#define TC_SR_COVFS (0x1u << 0) /**< \brief (TC_SR) Counter Overflow Status */
+#define TC_SR_LOVRS (0x1u << 1) /**< \brief (TC_SR) Load Overrun Status */
+#define TC_SR_CPAS (0x1u << 2) /**< \brief (TC_SR) RA Compare Status */
+#define TC_SR_CPBS (0x1u << 3) /**< \brief (TC_SR) RB Compare Status */
+#define TC_SR_CPCS (0x1u << 4) /**< \brief (TC_SR) RC Compare Status */
+#define TC_SR_LDRAS (0x1u << 5) /**< \brief (TC_SR) RA Loading Status */
+#define TC_SR_LDRBS (0x1u << 6) /**< \brief (TC_SR) RB Loading Status */
+#define TC_SR_ETRGS (0x1u << 7) /**< \brief (TC_SR) External Trigger Status */
+#define TC_SR_CLKSTA (0x1u << 16) /**< \brief (TC_SR) Clock Enabling Status */
+#define TC_SR_MTIOA (0x1u << 17) /**< \brief (TC_SR) TIOA Mirror */
+#define TC_SR_MTIOB (0x1u << 18) /**< \brief (TC_SR) TIOB Mirror */
+/* -------- TC_IER : (TC Offset: N/A) Interrupt Enable Register -------- */
+#define TC_IER_COVFS (0x1u << 0) /**< \brief (TC_IER) Counter Overflow */
+#define TC_IER_LOVRS (0x1u << 1) /**< \brief (TC_IER) Load Overrun */
+#define TC_IER_CPAS (0x1u << 2) /**< \brief (TC_IER) RA Compare */
+#define TC_IER_CPBS (0x1u << 3) /**< \brief (TC_IER) RB Compare */
+#define TC_IER_CPCS (0x1u << 4) /**< \brief (TC_IER) RC Compare */
+#define TC_IER_LDRAS (0x1u << 5) /**< \brief (TC_IER) RA Loading */
+#define TC_IER_LDRBS (0x1u << 6) /**< \brief (TC_IER) RB Loading */
+#define TC_IER_ETRGS (0x1u << 7) /**< \brief (TC_IER) External Trigger */
+/* -------- TC_IDR : (TC Offset: N/A) Interrupt Disable Register -------- */
+#define TC_IDR_COVFS (0x1u << 0) /**< \brief (TC_IDR) Counter Overflow */
+#define TC_IDR_LOVRS (0x1u << 1) /**< \brief (TC_IDR) Load Overrun */
+#define TC_IDR_CPAS (0x1u << 2) /**< \brief (TC_IDR) RA Compare */
+#define TC_IDR_CPBS (0x1u << 3) /**< \brief (TC_IDR) RB Compare */
+#define TC_IDR_CPCS (0x1u << 4) /**< \brief (TC_IDR) RC Compare */
+#define TC_IDR_LDRAS (0x1u << 5) /**< \brief (TC_IDR) RA Loading */
+#define TC_IDR_LDRBS (0x1u << 6) /**< \brief (TC_IDR) RB Loading */
+#define TC_IDR_ETRGS (0x1u << 7) /**< \brief (TC_IDR) External Trigger */
+/* -------- TC_IMR : (TC Offset: N/A) Interrupt Mask Register -------- */
+#define TC_IMR_COVFS (0x1u << 0) /**< \brief (TC_IMR) Counter Overflow */
+#define TC_IMR_LOVRS (0x1u << 1) /**< \brief (TC_IMR) Load Overrun */
+#define TC_IMR_CPAS (0x1u << 2) /**< \brief (TC_IMR) RA Compare */
+#define TC_IMR_CPBS (0x1u << 3) /**< \brief (TC_IMR) RB Compare */
+#define TC_IMR_CPCS (0x1u << 4) /**< \brief (TC_IMR) RC Compare */
+#define TC_IMR_LDRAS (0x1u << 5) /**< \brief (TC_IMR) RA Loading */
+#define TC_IMR_LDRBS (0x1u << 6) /**< \brief (TC_IMR) RB Loading */
+#define TC_IMR_ETRGS (0x1u << 7) /**< \brief (TC_IMR) External Trigger */
+/* -------- TC_BCR : (TC Offset: 0xC0) Block Control Register -------- */
+#define TC_BCR_SYNC (0x1u << 0) /**< \brief (TC_BCR) Synchro Command */
+/* -------- TC_BMR : (TC Offset: 0xC4) Block Mode Register -------- */
+#define TC_BMR_TC0XC0S_Pos 0
+#define TC_BMR_TC0XC0S_Msk (0x3u << TC_BMR_TC0XC0S_Pos) /**< \brief (TC_BMR) External Clock Signal 0 Selection */
+#define TC_BMR_TC0XC0S_TCLK0 (0x0u << 0) /**< \brief (TC_BMR) Signal connected to XC0: TCLK0 */
+#define TC_BMR_TC0XC0S_TIOA1 (0x2u << 0) /**< \brief (TC_BMR) Signal connected to XC0: TIOA1 */
+#define TC_BMR_TC0XC0S_TIOA2 (0x3u << 0) /**< \brief (TC_BMR) Signal connected to XC0: TIOA2 */
+#define TC_BMR_TC1XC1S_Pos 2
+#define TC_BMR_TC1XC1S_Msk (0x3u << TC_BMR_TC1XC1S_Pos) /**< \brief (TC_BMR) External Clock Signal 1 Selection */
+#define TC_BMR_TC1XC1S_TCLK1 (0x0u << 2) /**< \brief (TC_BMR) Signal connected to XC1: TCLK1 */
+#define TC_BMR_TC1XC1S_TIOA0 (0x2u << 2) /**< \brief (TC_BMR) Signal connected to XC1: TIOA0 */
+#define TC_BMR_TC1XC1S_TIOA2 (0x3u << 2) /**< \brief (TC_BMR) Signal connected to XC1: TIOA2 */
+#define TC_BMR_TC2XC2S_Pos 4
+#define TC_BMR_TC2XC2S_Msk (0x3u << TC_BMR_TC2XC2S_Pos) /**< \brief (TC_BMR) External Clock Signal 2 Selection */
+#define TC_BMR_TC2XC2S_TCLK2 (0x0u << 4) /**< \brief (TC_BMR) Signal connected to XC2: TCLK2 */
+#define TC_BMR_TC2XC2S_TIOA1 (0x2u << 4) /**< \brief (TC_BMR) Signal connected to XC2: TIOA1 */
+#define TC_BMR_TC2XC2S_TIOA2 (0x3u << 4) /**< \brief (TC_BMR) Signal connected to XC2: TIOA2 */
+#define TC_BMR_QDEN (0x1u << 8) /**< \brief (TC_BMR) Quadrature Decoder ENabled */
+#define TC_BMR_POSEN (0x1u << 9) /**< \brief (TC_BMR) POSition ENabled */
+#define TC_BMR_SPEEDEN (0x1u << 10) /**< \brief (TC_BMR) SPEED ENabled */
+#define TC_BMR_QDTRANS (0x1u << 11) /**< \brief (TC_BMR) Quadrature Decoding TRANSparent */
+#define TC_BMR_EDGPHA (0x1u << 12) /**< \brief (TC_BMR) EDGe on PHA count mode */
+#define TC_BMR_INVA (0x1u << 13) /**< \brief (TC_BMR) INVerted phA */
+#define TC_BMR_INVB (0x1u << 14) /**< \brief (TC_BMR) INVerted phB */
+#define TC_BMR_INVIDX (0x1u << 15) /**< \brief (TC_BMR) INVerted InDeX */
+#define TC_BMR_SWAP (0x1u << 16) /**< \brief (TC_BMR) SWAP PHA and PHB */
+#define TC_BMR_IDXPHB (0x1u << 17) /**< \brief (TC_BMR) InDeX pin is PHB pin */
+#define TC_BMR_FILTER (0x1u << 19) /**< \brief (TC_BMR) */
+#define TC_BMR_MAXFILT_Pos 20
+#define TC_BMR_MAXFILT_Msk (0x3fu << TC_BMR_MAXFILT_Pos) /**< \brief (TC_BMR) MAXimum FILTer */
+#define TC_BMR_MAXFILT(value) ((TC_BMR_MAXFILT_Msk & ((value) << TC_BMR_MAXFILT_Pos)))
+/* -------- TC_QIER : (TC Offset: 0xC8) QDEC Interrupt Enable Register -------- */
+#define TC_QIER_IDX (0x1u << 0) /**< \brief (TC_QIER) InDeX */
+#define TC_QIER_DIRCHG (0x1u << 1) /**< \brief (TC_QIER) DIRection CHanGe */
+#define TC_QIER_QERR (0x1u << 2) /**< \brief (TC_QIER) Quadrature ERRor */
+/* -------- TC_QIDR : (TC Offset: 0xCC) QDEC Interrupt Disable Register -------- */
+#define TC_QIDR_IDX (0x1u << 0) /**< \brief (TC_QIDR) InDeX */
+#define TC_QIDR_DIRCHG (0x1u << 1) /**< \brief (TC_QIDR) DIRection CHanGe */
+#define TC_QIDR_QERR (0x1u << 2) /**< \brief (TC_QIDR) Quadrature ERRor */
+/* -------- TC_QIMR : (TC Offset: 0xD0) QDEC Interrupt Mask Register -------- */
+#define TC_QIMR_IDX (0x1u << 0) /**< \brief (TC_QIMR) InDeX */
+#define TC_QIMR_DIRCHG (0x1u << 1) /**< \brief (TC_QIMR) DIRection CHanGe */
+#define TC_QIMR_QERR (0x1u << 2) /**< \brief (TC_QIMR) Quadrature ERRor */
+/* -------- TC_QISR : (TC Offset: 0xD4) QDEC Interrupt Status Register -------- */
+#define TC_QISR_IDX (0x1u << 0) /**< \brief (TC_QISR) InDeX */
+#define TC_QISR_DIRCHG (0x1u << 1) /**< \brief (TC_QISR) DIRection CHanGe */
+#define TC_QISR_QERR (0x1u << 2) /**< \brief (TC_QISR) Quadrature ERRor */
+#define TC_QISR_DIR (0x1u << 8) /**< \brief (TC_QISR) Direction */
+/* -------- TC_FMR : (TC Offset: 0xD8) Fault Mode Register -------- */
+#define TC_FMR_ENCF0 (0x1u << 0) /**< \brief (TC_FMR) ENable Compare Fault Channel 0 */
+#define TC_FMR_ENCF1 (0x1u << 1) /**< \brief (TC_FMR) ENable Compare Fault Channel 1 */
+/* -------- TC_WPMR : (TC Offset: 0xE4) Write Protect Mode Register -------- */
+#define TC_WPMR_WPEN (0x1u << 0) /**< \brief (TC_WPMR) Write Protect Enable */
+#define TC_WPMR_WPKEY_Pos 8
+#define TC_WPMR_WPKEY_Msk (0xffffffu << TC_WPMR_WPKEY_Pos) /**< \brief (TC_WPMR) Write Protect KEY */
+#define TC_WPMR_WPKEY(value) ((TC_WPMR_WPKEY_Msk & ((value) << TC_WPMR_WPKEY_Pos)))
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Two-wire Interface */
+/* ============================================================================= */
+/** \addtogroup SAM3S_TWI Two-wire Interface */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Twi hardware registers */
+typedef struct {
+ WoReg TWI_CR; /**< \brief (Twi Offset: 0x00) Control Register */
+ RwReg TWI_MMR; /**< \brief (Twi Offset: 0x04) Master Mode Register */
+ RwReg TWI_SMR; /**< \brief (Twi Offset: 0x08) Slave Mode Register */
+ RwReg TWI_IADR; /**< \brief (Twi Offset: 0x0C) Internal Address Register */
+ RwReg TWI_CWGR; /**< \brief (Twi Offset: 0x10) Clock Waveform Generator Register */
+ RwReg Reserved1[3];
+ RoReg TWI_SR; /**< \brief (Twi Offset: 0x20) Status Register */
+ WoReg TWI_IER; /**< \brief (Twi Offset: 0x24) Interrupt Enable Register */
+ WoReg TWI_IDR; /**< \brief (Twi Offset: 0x28) Interrupt Disable Register */
+ RoReg TWI_IMR; /**< \brief (Twi Offset: 0x2C) Interrupt Mask Register */
+ RoReg TWI_RHR; /**< \brief (Twi Offset: 0x30) Receive Holding Register */
+ WoReg TWI_THR; /**< \brief (Twi Offset: 0x34) Transmit Holding Register */
+ RwReg Reserved2[50];
+ RwReg TWI_RPR; /**< \brief (Twi Offset: 0x100) Receive Pointer Register */
+ RwReg TWI_RCR; /**< \brief (Twi Offset: 0x104) Receive Counter Register */
+ RwReg TWI_TPR; /**< \brief (Twi Offset: 0x108) Transmit Pointer Register */
+ RwReg TWI_TCR; /**< \brief (Twi Offset: 0x10C) Transmit Counter Register */
+ RwReg TWI_RNPR; /**< \brief (Twi Offset: 0x110) Receive Next Pointer Register */
+ RwReg TWI_RNCR; /**< \brief (Twi Offset: 0x114) Receive Next Counter Register */
+ RwReg TWI_TNPR; /**< \brief (Twi Offset: 0x118) Transmit Next Pointer Register */
+ RwReg TWI_TNCR; /**< \brief (Twi Offset: 0x11C) Transmit Next Counter Register */
+ WoReg TWI_PTCR; /**< \brief (Twi Offset: 0x120) Transfer Control Register */
+ RoReg TWI_PTSR; /**< \brief (Twi Offset: 0x124) Transfer Status Register */
+} Twi;
+#endif /* __ASSEMBLY__ */
+/* -------- TWI_CR : (TWI Offset: 0x00) Control Register -------- */
+#define TWI_CR_START (0x1u << 0) /**< \brief (TWI_CR) Send a START Condition */
+#define TWI_CR_STOP (0x1u << 1) /**< \brief (TWI_CR) Send a STOP Condition */
+#define TWI_CR_MSEN (0x1u << 2) /**< \brief (TWI_CR) TWI Master Mode Enabled */
+#define TWI_CR_MSDIS (0x1u << 3) /**< \brief (TWI_CR) TWI Master Mode Disabled */
+#define TWI_CR_SVEN (0x1u << 4) /**< \brief (TWI_CR) TWI Slave Mode Enabled */
+#define TWI_CR_SVDIS (0x1u << 5) /**< \brief (TWI_CR) TWI Slave Mode Disabled */
+#define TWI_CR_QUICK (0x1u << 6) /**< \brief (TWI_CR) SMBUS Quick Command */
+#define TWI_CR_SWRST (0x1u << 7) /**< \brief (TWI_CR) Software Reset */
+/* -------- TWI_MMR : (TWI Offset: 0x04) Master Mode Register -------- */
+#define TWI_MMR_IADRSZ_Pos 8
+#define TWI_MMR_IADRSZ_Msk (0x3u << TWI_MMR_IADRSZ_Pos) /**< \brief (TWI_MMR) Internal Device Address Size */
+#define TWI_MMR_IADRSZ_NONE (0x0u << 8) /**< \brief (TWI_MMR) No internal device address */
+#define TWI_MMR_IADRSZ_1_BYTE (0x1u << 8) /**< \brief (TWI_MMR) One-byte internal device address */
+#define TWI_MMR_IADRSZ_2_BYTE (0x2u << 8) /**< \brief (TWI_MMR) Two-byte internal device address */
+#define TWI_MMR_IADRSZ_3_BYTE (0x3u << 8) /**< \brief (TWI_MMR) Three-byte internal device address */
+#define TWI_MMR_MREAD (0x1u << 12) /**< \brief (TWI_MMR) Master Read Direction */
+#define TWI_MMR_DADR_Pos 16
+#define TWI_MMR_DADR_Msk (0x7fu << TWI_MMR_DADR_Pos) /**< \brief (TWI_MMR) Device Address */
+#define TWI_MMR_DADR(value) ((TWI_MMR_DADR_Msk & ((value) << TWI_MMR_DADR_Pos)))
+/* -------- TWI_SMR : (TWI Offset: 0x08) Slave Mode Register -------- */
+#define TWI_SMR_SADR_Pos 16
+#define TWI_SMR_SADR_Msk (0x7fu << TWI_SMR_SADR_Pos) /**< \brief (TWI_SMR) Slave Address */
+#define TWI_SMR_SADR(value) ((TWI_SMR_SADR_Msk & ((value) << TWI_SMR_SADR_Pos)))
+/* -------- TWI_IADR : (TWI Offset: 0x0C) Internal Address Register -------- */
+#define TWI_IADR_IADR_Pos 0
+#define TWI_IADR_IADR_Msk (0xffffffu << TWI_IADR_IADR_Pos) /**< \brief (TWI_IADR) Internal Address */
+#define TWI_IADR_IADR(value) ((TWI_IADR_IADR_Msk & ((value) << TWI_IADR_IADR_Pos)))
+/* -------- TWI_CWGR : (TWI Offset: 0x10) Clock Waveform Generator Register -------- */
+#define TWI_CWGR_CLDIV_Pos 0
+#define TWI_CWGR_CLDIV_Msk (0xffu << TWI_CWGR_CLDIV_Pos) /**< \brief (TWI_CWGR) Clock Low Divider */
+#define TWI_CWGR_CLDIV(value) ((TWI_CWGR_CLDIV_Msk & ((value) << TWI_CWGR_CLDIV_Pos)))
+#define TWI_CWGR_CHDIV_Pos 8
+#define TWI_CWGR_CHDIV_Msk (0xffu << TWI_CWGR_CHDIV_Pos) /**< \brief (TWI_CWGR) Clock High Divider */
+#define TWI_CWGR_CHDIV(value) ((TWI_CWGR_CHDIV_Msk & ((value) << TWI_CWGR_CHDIV_Pos)))
+#define TWI_CWGR_CKDIV_Pos 16
+#define TWI_CWGR_CKDIV_Msk (0x7u << TWI_CWGR_CKDIV_Pos) /**< \brief (TWI_CWGR) Clock Divider */
+#define TWI_CWGR_CKDIV(value) ((TWI_CWGR_CKDIV_Msk & ((value) << TWI_CWGR_CKDIV_Pos)))
+/* -------- TWI_SR : (TWI Offset: 0x20) Status Register -------- */
+#define TWI_SR_TXCOMP (0x1u << 0) /**< \brief (TWI_SR) Transmission Completed (automatically set / reset) */
+#define TWI_SR_RXRDY (0x1u << 1) /**< \brief (TWI_SR) Receive Holding Register Ready (automatically set / reset) */
+#define TWI_SR_TXRDY (0x1u << 2) /**< \brief (TWI_SR) Transmit Holding Register Ready (automatically set / reset) */
+#define TWI_SR_SVREAD (0x1u << 3) /**< \brief (TWI_SR) Slave Read (automatically set / reset) */
+#define TWI_SR_SVACC (0x1u << 4) /**< \brief (TWI_SR) Slave Access (automatically set / reset) */
+#define TWI_SR_GACC (0x1u << 5) /**< \brief (TWI_SR) General Call Access (clear on read) */
+#define TWI_SR_OVRE (0x1u << 6) /**< \brief (TWI_SR) Overrun Error (clear on read) */
+#define TWI_SR_NACK (0x1u << 8) /**< \brief (TWI_SR) Not Acknowledged (clear on read) */
+#define TWI_SR_ARBLST (0x1u << 9) /**< \brief (TWI_SR) Arbitration Lost (clear on read) */
+#define TWI_SR_SCLWS (0x1u << 10) /**< \brief (TWI_SR) Clock Wait State (automatically set / reset) */
+#define TWI_SR_EOSACC (0x1u << 11) /**< \brief (TWI_SR) End Of Slave Access (clear on read) */
+#define TWI_SR_ENDRX (0x1u << 12) /**< \brief (TWI_SR) End of RX buffer */
+#define TWI_SR_ENDTX (0x1u << 13) /**< \brief (TWI_SR) End of TX buffer */
+#define TWI_SR_RXBUFF (0x1u << 14) /**< \brief (TWI_SR) RX Buffer Full */
+#define TWI_SR_TXBUFE (0x1u << 15) /**< \brief (TWI_SR) TX Buffer Empty */
+/* -------- TWI_IER : (TWI Offset: 0x24) Interrupt Enable Register -------- */
+#define TWI_IER_TXCOMP (0x1u << 0) /**< \brief (TWI_IER) Transmission Completed Interrupt Enable */
+#define TWI_IER_RXRDY (0x1u << 1) /**< \brief (TWI_IER) Receive Holding Register Ready Interrupt Enable */
+#define TWI_IER_TXRDY (0x1u << 2) /**< \brief (TWI_IER) Transmit Holding Register Ready Interrupt Enable */
+#define TWI_IER_SVACC (0x1u << 4) /**< \brief (TWI_IER) Slave Access Interrupt Enable */
+#define TWI_IER_GACC (0x1u << 5) /**< \brief (TWI_IER) General Call Access Interrupt Enable */
+#define TWI_IER_OVRE (0x1u << 6) /**< \brief (TWI_IER) Overrun Error Interrupt Enable */
+#define TWI_IER_NACK (0x1u << 8) /**< \brief (TWI_IER) Not Acknowledge Interrupt Enable */
+#define TWI_IER_ARBLST (0x1u << 9) /**< \brief (TWI_IER) Arbitration Lost Interrupt Enable */
+#define TWI_IER_SCL_WS (0x1u << 10) /**< \brief (TWI_IER) Clock Wait State Interrupt Enable */
+#define TWI_IER_EOSACC (0x1u << 11) /**< \brief (TWI_IER) End Of Slave Access Interrupt Enable */
+#define TWI_IER_ENDRX (0x1u << 12) /**< \brief (TWI_IER) End of Receive Buffer Interrupt Enable */
+#define TWI_IER_ENDTX (0x1u << 13) /**< \brief (TWI_IER) End of Transmit Buffer Interrupt Enable */
+#define TWI_IER_RXBUFF (0x1u << 14) /**< \brief (TWI_IER) Receive Buffer Full Interrupt Enable */
+#define TWI_IER_TXBUFE (0x1u << 15) /**< \brief (TWI_IER) Transmit Buffer Empty Interrupt Enable */
+/* -------- TWI_IDR : (TWI Offset: 0x28) Interrupt Disable Register -------- */
+#define TWI_IDR_TXCOMP (0x1u << 0) /**< \brief (TWI_IDR) Transmission Completed Interrupt Disable */
+#define TWI_IDR_RXRDY (0x1u << 1) /**< \brief (TWI_IDR) Receive Holding Register Ready Interrupt Disable */
+#define TWI_IDR_TXRDY (0x1u << 2) /**< \brief (TWI_IDR) Transmit Holding Register Ready Interrupt Disable */
+#define TWI_IDR_SVACC (0x1u << 4) /**< \brief (TWI_IDR) Slave Access Interrupt Disable */
+#define TWI_IDR_GACC (0x1u << 5) /**< \brief (TWI_IDR) General Call Access Interrupt Disable */
+#define TWI_IDR_OVRE (0x1u << 6) /**< \brief (TWI_IDR) Overrun Error Interrupt Disable */
+#define TWI_IDR_NACK (0x1u << 8) /**< \brief (TWI_IDR) Not Acknowledge Interrupt Disable */
+#define TWI_IDR_ARBLST (0x1u << 9) /**< \brief (TWI_IDR) Arbitration Lost Interrupt Disable */
+#define TWI_IDR_SCL_WS (0x1u << 10) /**< \brief (TWI_IDR) Clock Wait State Interrupt Disable */
+#define TWI_IDR_EOSACC (0x1u << 11) /**< \brief (TWI_IDR) End Of Slave Access Interrupt Disable */
+#define TWI_IDR_ENDRX (0x1u << 12) /**< \brief (TWI_IDR) End of Receive Buffer Interrupt Disable */
+#define TWI_IDR_ENDTX (0x1u << 13) /**< \brief (TWI_IDR) End of Transmit Buffer Interrupt Disable */
+#define TWI_IDR_RXBUFF (0x1u << 14) /**< \brief (TWI_IDR) Receive Buffer Full Interrupt Disable */
+#define TWI_IDR_TXBUFE (0x1u << 15) /**< \brief (TWI_IDR) Transmit Buffer Empty Interrupt Disable */
+/* -------- TWI_IMR : (TWI Offset: 0x2C) Interrupt Mask Register -------- */
+#define TWI_IMR_TXCOMP (0x1u << 0) /**< \brief (TWI_IMR) Transmission Completed Interrupt Mask */
+#define TWI_IMR_RXRDY (0x1u << 1) /**< \brief (TWI_IMR) Receive Holding Register Ready Interrupt Mask */
+#define TWI_IMR_TXRDY (0x1u << 2) /**< \brief (TWI_IMR) Transmit Holding Register Ready Interrupt Mask */
+#define TWI_IMR_SVACC (0x1u << 4) /**< \brief (TWI_IMR) Slave Access Interrupt Mask */
+#define TWI_IMR_GACC (0x1u << 5) /**< \brief (TWI_IMR) General Call Access Interrupt Mask */
+#define TWI_IMR_OVRE (0x1u << 6) /**< \brief (TWI_IMR) Overrun Error Interrupt Mask */
+#define TWI_IMR_NACK (0x1u << 8) /**< \brief (TWI_IMR) Not Acknowledge Interrupt Mask */
+#define TWI_IMR_ARBLST (0x1u << 9) /**< \brief (TWI_IMR) Arbitration Lost Interrupt Mask */
+#define TWI_IMR_SCL_WS (0x1u << 10) /**< \brief (TWI_IMR) Clock Wait State Interrupt Mask */
+#define TWI_IMR_EOSACC (0x1u << 11) /**< \brief (TWI_IMR) End Of Slave Access Interrupt Mask */
+#define TWI_IMR_ENDRX (0x1u << 12) /**< \brief (TWI_IMR) End of Receive Buffer Interrupt Mask */
+#define TWI_IMR_ENDTX (0x1u << 13) /**< \brief (TWI_IMR) End of Transmit Buffer Interrupt Mask */
+#define TWI_IMR_RXBUFF (0x1u << 14) /**< \brief (TWI_IMR) Receive Buffer Full Interrupt Mask */
+#define TWI_IMR_TXBUFE (0x1u << 15) /**< \brief (TWI_IMR) Transmit Buffer Empty Interrupt Mask */
+/* -------- TWI_RHR : (TWI Offset: 0x30) Receive Holding Register -------- */
+#define TWI_RHR_RXDATA_Pos 0
+#define TWI_RHR_RXDATA_Msk (0xffu << TWI_RHR_RXDATA_Pos) /**< \brief (TWI_RHR) Master or Slave Receive Holding Data */
+/* -------- TWI_THR : (TWI Offset: 0x34) Transmit Holding Register -------- */
+#define TWI_THR_TXDATA_Pos 0
+#define TWI_THR_TXDATA_Msk (0xffu << TWI_THR_TXDATA_Pos) /**< \brief (TWI_THR) Master or Slave Transmit Holding Data */
+#define TWI_THR_TXDATA(value) ((TWI_THR_TXDATA_Msk & ((value) << TWI_THR_TXDATA_Pos)))
+/* -------- TWI_RPR : (TWI Offset: 0x100) Receive Pointer Register -------- */
+#define TWI_RPR_RXPTR_Pos 0
+#define TWI_RPR_RXPTR_Msk (0xffffffffu << TWI_RPR_RXPTR_Pos) /**< \brief (TWI_RPR) Receive Pointer Register */
+#define TWI_RPR_RXPTR(value) ((TWI_RPR_RXPTR_Msk & ((value) << TWI_RPR_RXPTR_Pos)))
+/* -------- TWI_RCR : (TWI Offset: 0x104) Receive Counter Register -------- */
+#define TWI_RCR_RXCTR_Pos 0
+#define TWI_RCR_RXCTR_Msk (0xffffu << TWI_RCR_RXCTR_Pos) /**< \brief (TWI_RCR) Receive Counter Register */
+#define TWI_RCR_RXCTR(value) ((TWI_RCR_RXCTR_Msk & ((value) << TWI_RCR_RXCTR_Pos)))
+/* -------- TWI_TPR : (TWI Offset: 0x108) Transmit Pointer Register -------- */
+#define TWI_TPR_TXPTR_Pos 0
+#define TWI_TPR_TXPTR_Msk (0xffffffffu << TWI_TPR_TXPTR_Pos) /**< \brief (TWI_TPR) Transmit Counter Register */
+#define TWI_TPR_TXPTR(value) ((TWI_TPR_TXPTR_Msk & ((value) << TWI_TPR_TXPTR_Pos)))
+/* -------- TWI_TCR : (TWI Offset: 0x10C) Transmit Counter Register -------- */
+#define TWI_TCR_TXCTR_Pos 0
+#define TWI_TCR_TXCTR_Msk (0xffffu << TWI_TCR_TXCTR_Pos) /**< \brief (TWI_TCR) Transmit Counter Register */
+#define TWI_TCR_TXCTR(value) ((TWI_TCR_TXCTR_Msk & ((value) << TWI_TCR_TXCTR_Pos)))
+/* -------- TWI_RNPR : (TWI Offset: 0x110) Receive Next Pointer Register -------- */
+#define TWI_RNPR_RXNPTR_Pos 0
+#define TWI_RNPR_RXNPTR_Msk (0xffffffffu << TWI_RNPR_RXNPTR_Pos) /**< \brief (TWI_RNPR) Receive Next Pointer */
+#define TWI_RNPR_RXNPTR(value) ((TWI_RNPR_RXNPTR_Msk & ((value) << TWI_RNPR_RXNPTR_Pos)))
+/* -------- TWI_RNCR : (TWI Offset: 0x114) Receive Next Counter Register -------- */
+#define TWI_RNCR_RXNCTR_Pos 0
+#define TWI_RNCR_RXNCTR_Msk (0xffffu << TWI_RNCR_RXNCTR_Pos) /**< \brief (TWI_RNCR) Receive Next Counter */
+#define TWI_RNCR_RXNCTR(value) ((TWI_RNCR_RXNCTR_Msk & ((value) << TWI_RNCR_RXNCTR_Pos)))
+/* -------- TWI_TNPR : (TWI Offset: 0x118) Transmit Next Pointer Register -------- */
+#define TWI_TNPR_TXNPTR_Pos 0
+#define TWI_TNPR_TXNPTR_Msk (0xffffffffu << TWI_TNPR_TXNPTR_Pos) /**< \brief (TWI_TNPR) Transmit Next Pointer */
+#define TWI_TNPR_TXNPTR(value) ((TWI_TNPR_TXNPTR_Msk & ((value) << TWI_TNPR_TXNPTR_Pos)))
+/* -------- TWI_TNCR : (TWI Offset: 0x11C) Transmit Next Counter Register -------- */
+#define TWI_TNCR_TXNCTR_Pos 0
+#define TWI_TNCR_TXNCTR_Msk (0xffffu << TWI_TNCR_TXNCTR_Pos) /**< \brief (TWI_TNCR) Transmit Counter Next */
+#define TWI_TNCR_TXNCTR(value) ((TWI_TNCR_TXNCTR_Msk & ((value) << TWI_TNCR_TXNCTR_Pos)))
+/* -------- TWI_PTCR : (TWI Offset: 0x120) Transfer Control Register -------- */
+#define TWI_PTCR_RXTEN (0x1u << 0) /**< \brief (TWI_PTCR) Receiver Transfer Enable */
+#define TWI_PTCR_RXTDIS (0x1u << 1) /**< \brief (TWI_PTCR) Receiver Transfer Disable */
+#define TWI_PTCR_TXTEN (0x1u << 8) /**< \brief (TWI_PTCR) Transmitter Transfer Enable */
+#define TWI_PTCR_TXTDIS (0x1u << 9) /**< \brief (TWI_PTCR) Transmitter Transfer Disable */
+/* -------- TWI_PTSR : (TWI Offset: 0x124) Transfer Status Register -------- */
+#define TWI_PTSR_RXTEN (0x1u << 0) /**< \brief (TWI_PTSR) Receiver Transfer Enable */
+#define TWI_PTSR_TXTEN (0x1u << 8) /**< \brief (TWI_PTSR) Transmitter Transfer Enable */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Universal Asynchronous Receiver Transmitter */
+/* ============================================================================= */
+/** \addtogroup SAM3S_UART Universal Asynchronous Receiver Transmitter */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Uart hardware registers */
+typedef struct {
+ WoReg UART_CR; /**< \brief (Uart Offset: 0x0000) Control Register */
+ RwReg UART_MR; /**< \brief (Uart Offset: 0x0004) Mode Register */
+ WoReg UART_IER; /**< \brief (Uart Offset: 0x0008) Interrupt Enable Register */
+ WoReg UART_IDR; /**< \brief (Uart Offset: 0x000C) Interrupt Disable Register */
+ RoReg UART_IMR; /**< \brief (Uart Offset: 0x0010) Interrupt Mask Register */
+ RoReg UART_SR; /**< \brief (Uart Offset: 0x0014) Status Register */
+ RoReg UART_RHR; /**< \brief (Uart Offset: 0x0018) Receive Holding Register */
+ WoReg UART_THR; /**< \brief (Uart Offset: 0x001C) Transmit Holding Register */
+ RwReg UART_BRGR; /**< \brief (Uart Offset: 0x0020) Baud Rate Generator Register */
+ RwReg Reserved1[55];
+ RwReg UART_RPR; /**< \brief (Uart Offset: 0x100) Receive Pointer Register */
+ RwReg UART_RCR; /**< \brief (Uart Offset: 0x104) Receive Counter Register */
+ RwReg UART_TPR; /**< \brief (Uart Offset: 0x108) Transmit Pointer Register */
+ RwReg UART_TCR; /**< \brief (Uart Offset: 0x10C) Transmit Counter Register */
+ RwReg UART_RNPR; /**< \brief (Uart Offset: 0x110) Receive Next Pointer Register */
+ RwReg UART_RNCR; /**< \brief (Uart Offset: 0x114) Receive Next Counter Register */
+ RwReg UART_TNPR; /**< \brief (Uart Offset: 0x118) Transmit Next Pointer Register */
+ RwReg UART_TNCR; /**< \brief (Uart Offset: 0x11C) Transmit Next Counter Register */
+ WoReg UART_PTCR; /**< \brief (Uart Offset: 0x120) Transfer Control Register */
+ RoReg UART_PTSR; /**< \brief (Uart Offset: 0x124) Transfer Status Register */
+} Uart;
+#endif /* __ASSEMBLY__ */
+/* -------- UART_CR : (UART Offset: 0x0000) Control Register -------- */
+#define UART_CR_RSTRX (0x1u << 2) /**< \brief (UART_CR) Reset Receiver */
+#define UART_CR_RSTTX (0x1u << 3) /**< \brief (UART_CR) Reset Transmitter */
+#define UART_CR_RXEN (0x1u << 4) /**< \brief (UART_CR) Receiver Enable */
+#define UART_CR_RXDIS (0x1u << 5) /**< \brief (UART_CR) Receiver Disable */
+#define UART_CR_TXEN (0x1u << 6) /**< \brief (UART_CR) Transmitter Enable */
+#define UART_CR_TXDIS (0x1u << 7) /**< \brief (UART_CR) Transmitter Disable */
+#define UART_CR_RSTSTA (0x1u << 8) /**< \brief (UART_CR) Reset Status Bits */
+/* -------- UART_MR : (UART Offset: 0x0004) Mode Register -------- */
+#define UART_MR_PAR_Pos 9
+#define UART_MR_PAR_Msk (0x7u << UART_MR_PAR_Pos) /**< \brief (UART_MR) Parity Type */
+#define UART_MR_PAR_EVEN (0x0u << 9) /**< \brief (UART_MR) Even parity */
+#define UART_MR_PAR_ODD (0x1u << 9) /**< \brief (UART_MR) Odd parity */
+#define UART_MR_PAR_SPACE (0x2u << 9) /**< \brief (UART_MR) Space: parity forced to 0 */
+#define UART_MR_PAR_MARK (0x3u << 9) /**< \brief (UART_MR) Mark: parity forced to 1 */
+#define UART_MR_PAR_NO (0x4u << 9) /**< \brief (UART_MR) No parity */
+#define UART_MR_CHMODE_Pos 14
+#define UART_MR_CHMODE_Msk (0x3u << UART_MR_CHMODE_Pos) /**< \brief (UART_MR) Channel Mode */
+#define UART_MR_CHMODE_NORMAL (0x0u << 14) /**< \brief (UART_MR) Normal Mode */
+#define UART_MR_CHMODE_AUTOMATIC (0x1u << 14) /**< \brief (UART_MR) Automatic Echo */
+#define UART_MR_CHMODE_LOCAL_LOOPBACK (0x2u << 14) /**< \brief (UART_MR) Local Loopback */
+#define UART_MR_CHMODE_REMOTE_LOOPBACK (0x3u << 14) /**< \brief (UART_MR) Remote Loopback */
+/* -------- UART_IER : (UART Offset: 0x0008) Interrupt Enable Register -------- */
+#define UART_IER_RXRDY (0x1u << 0) /**< \brief (UART_IER) Enable RXRDY Interrupt */
+#define UART_IER_TXRDY (0x1u << 1) /**< \brief (UART_IER) Enable TXRDY Interrupt */
+#define UART_IER_ENDRX (0x1u << 3) /**< \brief (UART_IER) Enable End of Receive Transfer Interrupt */
+#define UART_IER_ENDTX (0x1u << 4) /**< \brief (UART_IER) Enable End of Transmit Interrupt */
+#define UART_IER_OVRE (0x1u << 5) /**< \brief (UART_IER) Enable Overrun Error Interrupt */
+#define UART_IER_FRAME (0x1u << 6) /**< \brief (UART_IER) Enable Framing Error Interrupt */
+#define UART_IER_PARE (0x1u << 7) /**< \brief (UART_IER) Enable Parity Error Interrupt */
+#define UART_IER_TXEMPTY (0x1u << 9) /**< \brief (UART_IER) Enable TXEMPTY Interrupt */
+#define UART_IER_TXBUFE (0x1u << 11) /**< \brief (UART_IER) Enable Buffer Empty Interrupt */
+#define UART_IER_RXBUFF (0x1u << 12) /**< \brief (UART_IER) Enable Buffer Full Interrupt */
+/* -------- UART_IDR : (UART Offset: 0x000C) Interrupt Disable Register -------- */
+#define UART_IDR_RXRDY (0x1u << 0) /**< \brief (UART_IDR) Disable RXRDY Interrupt */
+#define UART_IDR_TXRDY (0x1u << 1) /**< \brief (UART_IDR) Disable TXRDY Interrupt */
+#define UART_IDR_ENDRX (0x1u << 3) /**< \brief (UART_IDR) Disable End of Receive Transfer Interrupt */
+#define UART_IDR_ENDTX (0x1u << 4) /**< \brief (UART_IDR) Disable End of Transmit Interrupt */
+#define UART_IDR_OVRE (0x1u << 5) /**< \brief (UART_IDR) Disable Overrun Error Interrupt */
+#define UART_IDR_FRAME (0x1u << 6) /**< \brief (UART_IDR) Disable Framing Error Interrupt */
+#define UART_IDR_PARE (0x1u << 7) /**< \brief (UART_IDR) Disable Parity Error Interrupt */
+#define UART_IDR_TXEMPTY (0x1u << 9) /**< \brief (UART_IDR) Disable TXEMPTY Interrupt */
+#define UART_IDR_TXBUFE (0x1u << 11) /**< \brief (UART_IDR) Disable Buffer Empty Interrupt */
+#define UART_IDR_RXBUFF (0x1u << 12) /**< \brief (UART_IDR) Disable Buffer Full Interrupt */
+/* -------- UART_IMR : (UART Offset: 0x0010) Interrupt Mask Register -------- */
+#define UART_IMR_RXRDY (0x1u << 0) /**< \brief (UART_IMR) Mask RXRDY Interrupt */
+#define UART_IMR_TXRDY (0x1u << 1) /**< \brief (UART_IMR) Disable TXRDY Interrupt */
+#define UART_IMR_ENDRX (0x1u << 3) /**< \brief (UART_IMR) Mask End of Receive Transfer Interrupt */
+#define UART_IMR_ENDTX (0x1u << 4) /**< \brief (UART_IMR) Mask End of Transmit Interrupt */
+#define UART_IMR_OVRE (0x1u << 5) /**< \brief (UART_IMR) Mask Overrun Error Interrupt */
+#define UART_IMR_FRAME (0x1u << 6) /**< \brief (UART_IMR) Mask Framing Error Interrupt */
+#define UART_IMR_PARE (0x1u << 7) /**< \brief (UART_IMR) Mask Parity Error Interrupt */
+#define UART_IMR_TXEMPTY (0x1u << 9) /**< \brief (UART_IMR) Mask TXEMPTY Interrupt */
+#define UART_IMR_TXBUFE (0x1u << 11) /**< \brief (UART_IMR) Mask TXBUFE Interrupt */
+#define UART_IMR_RXBUFF (0x1u << 12) /**< \brief (UART_IMR) Mask RXBUFF Interrupt */
+/* -------- UART_SR : (UART Offset: 0x0014) Status Register -------- */
+#define UART_SR_RXRDY (0x1u << 0) /**< \brief (UART_SR) Receiver Ready */
+#define UART_SR_TXRDY (0x1u << 1) /**< \brief (UART_SR) Transmitter Ready */
+#define UART_SR_ENDRX (0x1u << 3) /**< \brief (UART_SR) End of Receiver Transfer */
+#define UART_SR_ENDTX (0x1u << 4) /**< \brief (UART_SR) End of Transmitter Transfer */
+#define UART_SR_OVRE (0x1u << 5) /**< \brief (UART_SR) Overrun Error */
+#define UART_SR_FRAME (0x1u << 6) /**< \brief (UART_SR) Framing Error */
+#define UART_SR_PARE (0x1u << 7) /**< \brief (UART_SR) Parity Error */
+#define UART_SR_TXEMPTY (0x1u << 9) /**< \brief (UART_SR) Transmitter Empty */
+#define UART_SR_TXBUFE (0x1u << 11) /**< \brief (UART_SR) Transmission Buffer Empty */
+#define UART_SR_RXBUFF (0x1u << 12) /**< \brief (UART_SR) Receive Buffer Full */
+/* -------- UART_RHR : (UART Offset: 0x0018) Receive Holding Register -------- */
+#define UART_RHR_RXCHR_Pos 0
+#define UART_RHR_RXCHR_Msk (0xffu << UART_RHR_RXCHR_Pos) /**< \brief (UART_RHR) Received Character */
+/* -------- UART_THR : (UART Offset: 0x001C) Transmit Holding Register -------- */
+#define UART_THR_TXCHR_Pos 0
+#define UART_THR_TXCHR_Msk (0xffu << UART_THR_TXCHR_Pos) /**< \brief (UART_THR) Character to be Transmitted */
+#define UART_THR_TXCHR(value) ((UART_THR_TXCHR_Msk & ((value) << UART_THR_TXCHR_Pos)))
+/* -------- UART_BRGR : (UART Offset: 0x0020) Baud Rate Generator Register -------- */
+#define UART_BRGR_CD_Pos 0
+#define UART_BRGR_CD_Msk (0xffffu << UART_BRGR_CD_Pos) /**< \brief (UART_BRGR) Clock Divisor */
+#define UART_BRGR_CD(value) ((UART_BRGR_CD_Msk & ((value) << UART_BRGR_CD_Pos)))
+/* -------- UART_RPR : (UART Offset: 0x100) Receive Pointer Register -------- */
+#define UART_RPR_RXPTR_Pos 0
+#define UART_RPR_RXPTR_Msk (0xffffffffu << UART_RPR_RXPTR_Pos) /**< \brief (UART_RPR) Receive Pointer Register */
+#define UART_RPR_RXPTR(value) ((UART_RPR_RXPTR_Msk & ((value) << UART_RPR_RXPTR_Pos)))
+/* -------- UART_RCR : (UART Offset: 0x104) Receive Counter Register -------- */
+#define UART_RCR_RXCTR_Pos 0
+#define UART_RCR_RXCTR_Msk (0xffffu << UART_RCR_RXCTR_Pos) /**< \brief (UART_RCR) Receive Counter Register */
+#define UART_RCR_RXCTR(value) ((UART_RCR_RXCTR_Msk & ((value) << UART_RCR_RXCTR_Pos)))
+/* -------- UART_TPR : (UART Offset: 0x108) Transmit Pointer Register -------- */
+#define UART_TPR_TXPTR_Pos 0
+#define UART_TPR_TXPTR_Msk (0xffffffffu << UART_TPR_TXPTR_Pos) /**< \brief (UART_TPR) Transmit Counter Register */
+#define UART_TPR_TXPTR(value) ((UART_TPR_TXPTR_Msk & ((value) << UART_TPR_TXPTR_Pos)))
+/* -------- UART_TCR : (UART Offset: 0x10C) Transmit Counter Register -------- */
+#define UART_TCR_TXCTR_Pos 0
+#define UART_TCR_TXCTR_Msk (0xffffu << UART_TCR_TXCTR_Pos) /**< \brief (UART_TCR) Transmit Counter Register */
+#define UART_TCR_TXCTR(value) ((UART_TCR_TXCTR_Msk & ((value) << UART_TCR_TXCTR_Pos)))
+/* -------- UART_RNPR : (UART Offset: 0x110) Receive Next Pointer Register -------- */
+#define UART_RNPR_RXNPTR_Pos 0
+#define UART_RNPR_RXNPTR_Msk (0xffffffffu << UART_RNPR_RXNPTR_Pos) /**< \brief (UART_RNPR) Receive Next Pointer */
+#define UART_RNPR_RXNPTR(value) ((UART_RNPR_RXNPTR_Msk & ((value) << UART_RNPR_RXNPTR_Pos)))
+/* -------- UART_RNCR : (UART Offset: 0x114) Receive Next Counter Register -------- */
+#define UART_RNCR_RXNCTR_Pos 0
+#define UART_RNCR_RXNCTR_Msk (0xffffu << UART_RNCR_RXNCTR_Pos) /**< \brief (UART_RNCR) Receive Next Counter */
+#define UART_RNCR_RXNCTR(value) ((UART_RNCR_RXNCTR_Msk & ((value) << UART_RNCR_RXNCTR_Pos)))
+/* -------- UART_TNPR : (UART Offset: 0x118) Transmit Next Pointer Register -------- */
+#define UART_TNPR_TXNPTR_Pos 0
+#define UART_TNPR_TXNPTR_Msk (0xffffffffu << UART_TNPR_TXNPTR_Pos) /**< \brief (UART_TNPR) Transmit Next Pointer */
+#define UART_TNPR_TXNPTR(value) ((UART_TNPR_TXNPTR_Msk & ((value) << UART_TNPR_TXNPTR_Pos)))
+/* -------- UART_TNCR : (UART Offset: 0x11C) Transmit Next Counter Register -------- */
+#define UART_TNCR_TXNCTR_Pos 0
+#define UART_TNCR_TXNCTR_Msk (0xffffu << UART_TNCR_TXNCTR_Pos) /**< \brief (UART_TNCR) Transmit Counter Next */
+#define UART_TNCR_TXNCTR(value) ((UART_TNCR_TXNCTR_Msk & ((value) << UART_TNCR_TXNCTR_Pos)))
+/* -------- UART_PTCR : (UART Offset: 0x120) Transfer Control Register -------- */
+#define UART_PTCR_RXTEN (0x1u << 0) /**< \brief (UART_PTCR) Receiver Transfer Enable */
+#define UART_PTCR_RXTDIS (0x1u << 1) /**< \brief (UART_PTCR) Receiver Transfer Disable */
+#define UART_PTCR_TXTEN (0x1u << 8) /**< \brief (UART_PTCR) Transmitter Transfer Enable */
+#define UART_PTCR_TXTDIS (0x1u << 9) /**< \brief (UART_PTCR) Transmitter Transfer Disable */
+/* -------- UART_PTSR : (UART Offset: 0x124) Transfer Status Register -------- */
+#define UART_PTSR_RXTEN (0x1u << 0) /**< \brief (UART_PTSR) Receiver Transfer Enable */
+#define UART_PTSR_TXTEN (0x1u << 8) /**< \brief (UART_PTSR) Transmitter Transfer Enable */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR USB Device Port */
+/* ============================================================================= */
+/** \addtogroup SAM3S_UDP USB Device Port */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Udp hardware registers */
+typedef struct {
+ RoReg UDP_FRM_NUM; /**< \brief (Udp Offset: 0x000) Frame Number Register */
+ RwReg UDP_GLB_STAT; /**< \brief (Udp Offset: 0x004) Global State Register */
+ RwReg UDP_FADDR; /**< \brief (Udp Offset: 0x008) Function Address Register */
+ RwReg Reserved1[1];
+ WoReg UDP_IER; /**< \brief (Udp Offset: 0x010) Interrupt Enable Register */
+ WoReg UDP_IDR; /**< \brief (Udp Offset: 0x014) Interrupt Disable Register */
+ RoReg UDP_IMR; /**< \brief (Udp Offset: 0x018) Interrupt Mask Register */
+ RoReg UDP_ISR; /**< \brief (Udp Offset: 0x01C) Interrupt Status Register */
+ WoReg UDP_ICR; /**< \brief (Udp Offset: 0x020) Interrupt Clear Register */
+ RwReg Reserved2[1];
+ RwReg UDP_RST_EP; /**< \brief (Udp Offset: 0x028) Reset Endpoint Register */
+ RwReg Reserved3[1];
+ RwReg UDP_CSR[8]; /**< \brief (Udp Offset: 0x030) Endpoint Control and Status Register */
+ RwReg UDP_FDR[8]; /**< \brief (Udp Offset: 0x050) Endpoint FIFO Data Register */
+ RwReg Reserved4[1];
+ RwReg UDP_TXVC; /**< \brief (Udp Offset: 0x074) Transceiver Control Register */
+} Udp;
+#endif /* __ASSEMBLY__ */
+/* -------- UDP_FRM_NUM : (UDP Offset: 0x000) Frame Number Register -------- */
+#define UDP_FRM_NUM_FRM_NUM_Pos 0
+#define UDP_FRM_NUM_FRM_NUM_Msk (0x7ffu << UDP_FRM_NUM_FRM_NUM_Pos) /**< \brief (UDP_FRM_NUM) Frame Number as Defined in the Packet Field Formats */
+#define UDP_FRM_NUM_FRM_ERR (0x1u << 16) /**< \brief (UDP_FRM_NUM) Frame Error */
+#define UDP_FRM_NUM_FRM_OK (0x1u << 17) /**< \brief (UDP_FRM_NUM) Frame OK */
+/* -------- UDP_GLB_STAT : (UDP Offset: 0x004) Global State Register -------- */
+#define UDP_GLB_STAT_FADDEN (0x1u << 0) /**< \brief (UDP_GLB_STAT) Function Address Enable */
+#define UDP_GLB_STAT_CONFG (0x1u << 1) /**< \brief (UDP_GLB_STAT) Configured */
+#define UDP_GLB_STAT_ESR (0x1u << 2) /**< \brief (UDP_GLB_STAT) Enable Send Resume */
+#define UDP_GLB_STAT_RSMINPR (0x1u << 3) /**< \brief (UDP_GLB_STAT) */
+#define UDP_GLB_STAT_RMWUPE (0x1u << 4) /**< \brief (UDP_GLB_STAT) Remote Wake Up Enable */
+/* -------- UDP_FADDR : (UDP Offset: 0x008) Function Address Register -------- */
+#define UDP_FADDR_FADD_Pos 0
+#define UDP_FADDR_FADD_Msk (0x7fu << UDP_FADDR_FADD_Pos) /**< \brief (UDP_FADDR) Function Address Value */
+#define UDP_FADDR_FADD(value) ((UDP_FADDR_FADD_Msk & ((value) << UDP_FADDR_FADD_Pos)))
+#define UDP_FADDR_FEN (0x1u << 8) /**< \brief (UDP_FADDR) Function Enable */
+/* -------- UDP_IER : (UDP Offset: 0x010) Interrupt Enable Register -------- */
+#define UDP_IER_EP0INT (0x1u << 0) /**< \brief (UDP_IER) Enable Endpoint 0 Interrupt */
+#define UDP_IER_EP1INT (0x1u << 1) /**< \brief (UDP_IER) Enable Endpoint 1 Interrupt */
+#define UDP_IER_EP2INT (0x1u << 2) /**< \brief (UDP_IER) Enable Endpoint 2Interrupt */
+#define UDP_IER_EP3INT (0x1u << 3) /**< \brief (UDP_IER) Enable Endpoint 3 Interrupt */
+#define UDP_IER_EP4INT (0x1u << 4) /**< \brief (UDP_IER) Enable Endpoint 4 Interrupt */
+#define UDP_IER_EP5INT (0x1u << 5) /**< \brief (UDP_IER) Enable Endpoint 5 Interrupt */
+#define UDP_IER_EP6INT (0x1u << 6) /**< \brief (UDP_IER) Enable Endpoint 6 Interrupt */
+#define UDP_IER_EP7INT (0x1u << 7) /**< \brief (UDP_IER) Enable Endpoint 7 Interrupt */
+#define UDP_IER_RXSUSP (0x1u << 8) /**< \brief (UDP_IER) Enable UDP Suspend Interrupt */
+#define UDP_IER_RXRSM (0x1u << 9) /**< \brief (UDP_IER) Enable UDP Resume Interrupt */
+#define UDP_IER_EXTRSM (0x1u << 10) /**< \brief (UDP_IER) */
+#define UDP_IER_SOFINT (0x1u << 11) /**< \brief (UDP_IER) Enable Start Of Frame Interrupt */
+#define UDP_IER_WAKEUP (0x1u << 13) /**< \brief (UDP_IER) Enable UDP bus Wakeup Interrupt */
+/* -------- UDP_IDR : (UDP Offset: 0x014) Interrupt Disable Register -------- */
+#define UDP_IDR_EP0INT (0x1u << 0) /**< \brief (UDP_IDR) Disable Endpoint 0 Interrupt */
+#define UDP_IDR_EP1INT (0x1u << 1) /**< \brief (UDP_IDR) Disable Endpoint 1 Interrupt */
+#define UDP_IDR_EP2INT (0x1u << 2) /**< \brief (UDP_IDR) Disable Endpoint 2 Interrupt */
+#define UDP_IDR_EP3INT (0x1u << 3) /**< \brief (UDP_IDR) Disable Endpoint 3 Interrupt */
+#define UDP_IDR_EP4INT (0x1u << 4) /**< \brief (UDP_IDR) Disable Endpoint 4 Interrupt */
+#define UDP_IDR_EP5INT (0x1u << 5) /**< \brief (UDP_IDR) Disable Endpoint 5 Interrupt */
+#define UDP_IDR_EP6INT (0x1u << 6) /**< \brief (UDP_IDR) Disable Endpoint 6 Interrupt */
+#define UDP_IDR_EP7INT (0x1u << 7) /**< \brief (UDP_IDR) Disable Endpoint 7 Interrupt */
+#define UDP_IDR_RXSUSP (0x1u << 8) /**< \brief (UDP_IDR) Disable UDP Suspend Interrupt */
+#define UDP_IDR_RXRSM (0x1u << 9) /**< \brief (UDP_IDR) Disable UDP Resume Interrupt */
+#define UDP_IDR_EXTRSM (0x1u << 10) /**< \brief (UDP_IDR) */
+#define UDP_IDR_SOFINT (0x1u << 11) /**< \brief (UDP_IDR) Disable Start Of Frame Interrupt */
+#define UDP_IDR_WAKEUP (0x1u << 13) /**< \brief (UDP_IDR) Disable USB Bus Interrupt */
+/* -------- UDP_IMR : (UDP Offset: 0x018) Interrupt Mask Register -------- */
+#define UDP_IMR_EP0INT (0x1u << 0) /**< \brief (UDP_IMR) Mask Endpoint 0 Interrupt */
+#define UDP_IMR_EP1INT (0x1u << 1) /**< \brief (UDP_IMR) Mask Endpoint 1 Interrupt */
+#define UDP_IMR_EP2INT (0x1u << 2) /**< \brief (UDP_IMR) Mask Endpoint 2 Interrupt */
+#define UDP_IMR_EP3INT (0x1u << 3) /**< \brief (UDP_IMR) Mask Endpoint 3 Interrupt */
+#define UDP_IMR_EP4INT (0x1u << 4) /**< \brief (UDP_IMR) Mask Endpoint 4 Interrupt */
+#define UDP_IMR_EP5INT (0x1u << 5) /**< \brief (UDP_IMR) Mask Endpoint 5 Interrupt */
+#define UDP_IMR_EP6INT (0x1u << 6) /**< \brief (UDP_IMR) Mask Endpoint 6 Interrupt */
+#define UDP_IMR_EP7INT (0x1u << 7) /**< \brief (UDP_IMR) Mask Endpoint 7 Interrupt */
+#define UDP_IMR_RXSUSP (0x1u << 8) /**< \brief (UDP_IMR) Mask UDP Suspend Interrupt */
+#define UDP_IMR_RXRSM (0x1u << 9) /**< \brief (UDP_IMR) Mask UDP Resume Interrupt. */
+#define UDP_IMR_EXTRSM (0x1u << 10) /**< \brief (UDP_IMR) */
+#define UDP_IMR_SOFINT (0x1u << 11) /**< \brief (UDP_IMR) Mask Start Of Frame Interrupt */
+#define UDP_IMR_BIT12 (0x1u << 12) /**< \brief (UDP_IMR) UDP_IMR Bit 12 */
+#define UDP_IMR_WAKEUP (0x1u << 13) /**< \brief (UDP_IMR) USB Bus WAKEUP Interrupt */
+/* -------- UDP_ISR : (UDP Offset: 0x01C) Interrupt Status Register -------- */
+#define UDP_ISR_EP0INT (0x1u << 0) /**< \brief (UDP_ISR) Endpoint 0 Interrupt Status */
+#define UDP_ISR_EP1INT (0x1u << 1) /**< \brief (UDP_ISR) Endpoint 1 Interrupt Status */
+#define UDP_ISR_EP2INT (0x1u << 2) /**< \brief (UDP_ISR) Endpoint 2 Interrupt Status */
+#define UDP_ISR_EP3INT (0x1u << 3) /**< \brief (UDP_ISR) Endpoint 3 Interrupt Status */
+#define UDP_ISR_EP4INT (0x1u << 4) /**< \brief (UDP_ISR) Endpoint 4 Interrupt Status */
+#define UDP_ISR_EP5INT (0x1u << 5) /**< \brief (UDP_ISR) Endpoint 5 Interrupt Status */
+#define UDP_ISR_EP6INT (0x1u << 6) /**< \brief (UDP_ISR) Endpoint 6 Interrupt Status */
+#define UDP_ISR_EP7INT (0x1u << 7) /**< \brief (UDP_ISR) Endpoint 7Interrupt Status */
+#define UDP_ISR_RXSUSP (0x1u << 8) /**< \brief (UDP_ISR) UDP Suspend Interrupt Status */
+#define UDP_ISR_RXRSM (0x1u << 9) /**< \brief (UDP_ISR) UDP Resume Interrupt Status */
+#define UDP_ISR_EXTRSM (0x1u << 10) /**< \brief (UDP_ISR) */
+#define UDP_ISR_SOFINT (0x1u << 11) /**< \brief (UDP_ISR) Start of Frame Interrupt Status */
+#define UDP_ISR_ENDBUSRES (0x1u << 12) /**< \brief (UDP_ISR) End of BUS Reset Interrupt Status */
+#define UDP_ISR_WAKEUP (0x1u << 13) /**< \brief (UDP_ISR) UDP Resume Interrupt Status */
+/* -------- UDP_ICR : (UDP Offset: 0x020) Interrupt Clear Register -------- */
+#define UDP_ICR_RXSUSP (0x1u << 8) /**< \brief (UDP_ICR) Clear UDP Suspend Interrupt */
+#define UDP_ICR_RXRSM (0x1u << 9) /**< \brief (UDP_ICR) Clear UDP Resume Interrupt */
+#define UDP_ICR_EXTRSM (0x1u << 10) /**< \brief (UDP_ICR) */
+#define UDP_ICR_SOFINT (0x1u << 11) /**< \brief (UDP_ICR) Clear Start Of Frame Interrupt */
+#define UDP_ICR_ENDBUSRES (0x1u << 12) /**< \brief (UDP_ICR) Clear End of Bus Reset Interrupt */
+#define UDP_ICR_WAKEUP (0x1u << 13) /**< \brief (UDP_ICR) Clear Wakeup Interrupt */
+/* -------- UDP_RST_EP : (UDP Offset: 0x028) Reset Endpoint Register -------- */
+#define UDP_RST_EP_EP0 (0x1u << 0) /**< \brief (UDP_RST_EP) Reset Endpoint 0 */
+#define UDP_RST_EP_EP1 (0x1u << 1) /**< \brief (UDP_RST_EP) Reset Endpoint 1 */
+#define UDP_RST_EP_EP2 (0x1u << 2) /**< \brief (UDP_RST_EP) Reset Endpoint 2 */
+#define UDP_RST_EP_EP3 (0x1u << 3) /**< \brief (UDP_RST_EP) Reset Endpoint 3 */
+#define UDP_RST_EP_EP4 (0x1u << 4) /**< \brief (UDP_RST_EP) Reset Endpoint 4 */
+#define UDP_RST_EP_EP5 (0x1u << 5) /**< \brief (UDP_RST_EP) Reset Endpoint 5 */
+#define UDP_RST_EP_EP6 (0x1u << 6) /**< \brief (UDP_RST_EP) Reset Endpoint 6 */
+#define UDP_RST_EP_EP7 (0x1u << 7) /**< \brief (UDP_RST_EP) Reset Endpoint 7 */
+/* -------- UDP_CSR[8] : (UDP Offset: 0x030) Endpoint Control and Status Register -------- */
+#define UDP_CSR_TXCOMP (0x1u << 0) /**< \brief (UDP_CSR[8]) Generates an IN Packet with Data Previously Written in the DPR */
+#define UDP_CSR_RX_DATA_BK0 (0x1u << 1) /**< \brief (UDP_CSR[8]) Receive Data Bank 0 */
+#define UDP_CSR_RXSETUP (0x1u << 2) /**< \brief (UDP_CSR[8]) Received Setup */
+#define UDP_CSR_STALLSENTISOERROR (0x1u << 3) /**< \brief (UDP_CSR[8]) */
+#define UDP_CSR_TXPKTRDY (0x1u << 4) /**< \brief (UDP_CSR[8]) Transmit Packet Ready */
+#define UDP_CSR_FORCESTALL (0x1u << 5) /**< \brief (UDP_CSR[8]) Force Stall (used by Control, Bulk and Isochronous Endpoints) */
+#define UDP_CSR_RX_DATA_BK1 (0x1u << 6) /**< \brief (UDP_CSR[8]) Receive Data Bank 1 (only used by endpoints with ping-pong attributes) */
+#define UDP_CSR_DIR (0x1u << 7) /**< \brief (UDP_CSR[8]) Transfer Direction (only available for control endpoints) */
+#define UDP_CSR_EPTYPE_Pos 8
+#define UDP_CSR_EPTYPE_Msk (0x7u << UDP_CSR_EPTYPE_Pos) /**< \brief (UDP_CSR[8]) Endpoint Type */
+#define UDP_CSR_EPTYPE_CTRL (0x0u << 8) /**< \brief (UDP_CSR[8]) Control */
+#define UDP_CSR_EPTYPE_ISO_OUT (0x1u << 8) /**< \brief (UDP_CSR[8]) Isochronous OUT */
+#define UDP_CSR_EPTYPE_BULK_OUT (0x2u << 8) /**< \brief (UDP_CSR[8]) Bulk OUT */
+#define UDP_CSR_EPTYPE_INT_OUT (0x3u << 8) /**< \brief (UDP_CSR[8]) Interrupt OUT */
+#define UDP_CSR_EPTYPE_ISO_IN (0x5u << 8) /**< \brief (UDP_CSR[8]) Isochronous IN */
+#define UDP_CSR_EPTYPE_BULK_IN (0x6u << 8) /**< \brief (UDP_CSR[8]) Bulk IN */
+#define UDP_CSR_EPTYPE_INT_IN (0x7u << 8) /**< \brief (UDP_CSR[8]) Interrupt IN */
+#define UDP_CSR_DTGLE (0x1u << 11) /**< \brief (UDP_CSR[8]) Data Toggle */
+#define UDP_CSR_EPEDS (0x1u << 15) /**< \brief (UDP_CSR[8]) Endpoint Enable Disable */
+#define UDP_CSR_RXBYTECNT_Pos 16
+#define UDP_CSR_RXBYTECNT_Msk (0x7ffu << UDP_CSR_RXBYTECNT_Pos) /**< \brief (UDP_CSR[8]) Number of Bytes Available in the FIFO */
+#define UDP_CSR_RXBYTECNT(value) ((UDP_CSR_RXBYTECNT_Msk & ((value) << UDP_CSR_RXBYTECNT_Pos)))
+/* -------- UDP_FDR[8] : (UDP Offset: 0x050) Endpoint FIFO Data Register -------- */
+#define UDP_FDR_FIFO_DATA_Pos 0
+#define UDP_FDR_FIFO_DATA_Msk (0xffu << UDP_FDR_FIFO_DATA_Pos) /**< \brief (UDP_FDR[8]) FIFO Data Value */
+#define UDP_FDR_FIFO_DATA(value) ((UDP_FDR_FIFO_DATA_Msk & ((value) << UDP_FDR_FIFO_DATA_Pos)))
+/* -------- UDP_TXVC : (UDP Offset: 0x074) Transceiver Control Register -------- */
+#define UDP_TXVC_TXVDIS (0x1u << 8) /**< \brief (UDP_TXVC) Transceiver Disable */
+#define UDP_TXVC_PUON (0x1u << 9) /**< \brief (UDP_TXVC) Pullup On */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Universal Synchronous Asynchronous Receiver Transmitter */
+/* ============================================================================= */
+/** \addtogroup SAM3S_USART Universal Synchronous Asynchronous Receiver Transmitter */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Usart hardware registers */
+typedef struct {
+ WoReg US_CR; /**< \brief (Usart Offset: 0x0000) Control Register */
+ RwReg US_MR; /**< \brief (Usart Offset: 0x0004) Mode Register */
+ WoReg US_IER; /**< \brief (Usart Offset: 0x0008) Interrupt Enable Register */
+ WoReg US_IDR; /**< \brief (Usart Offset: 0x000C) Interrupt Disable Register */
+ RoReg US_IMR; /**< \brief (Usart Offset: 0x0010) Interrupt Mask Register */
+ RoReg US_CSR; /**< \brief (Usart Offset: 0x0014) Channel Status Register */
+ RoReg US_RHR; /**< \brief (Usart Offset: 0x0018) Receiver Holding Register */
+ WoReg US_THR; /**< \brief (Usart Offset: 0x001C) Transmitter Holding Register */
+ RwReg US_BRGR; /**< \brief (Usart Offset: 0x0020) Baud Rate Generator Register */
+ RwReg US_RTOR; /**< \brief (Usart Offset: 0x0024) Receiver Time-out Register */
+ RwReg US_TTGR; /**< \brief (Usart Offset: 0x0028) Transmitter Timeguard Register */
+ RwReg Reserved1[5];
+ RwReg US_FIDI; /**< \brief (Usart Offset: 0x0040) FI DI Ratio Register */
+ RoReg US_NER; /**< \brief (Usart Offset: 0x0044) Number of Errors Register */
+ RwReg Reserved2[1];
+ RwReg US_IF; /**< \brief (Usart Offset: 0x004C) IrDA Filter Register */
+ RwReg US_MAN; /**< \brief (Usart Offset: 0x0050) Manchester Encoder Decoder Register */
+ RwReg Reserved3[36];
+ RwReg US_WPMR; /**< \brief (Usart Offset: 0xE4) Write Protect Mode Register */
+ RoReg US_WPSR; /**< \brief (Usart Offset: 0xE8) Write Protect Status Register */
+ RwReg Reserved4[5];
+ RwReg US_RPR; /**< \brief (Usart Offset: 0x100) Receive Pointer Register */
+ RwReg US_RCR; /**< \brief (Usart Offset: 0x104) Receive Counter Register */
+ RwReg US_TPR; /**< \brief (Usart Offset: 0x108) Transmit Pointer Register */
+ RwReg US_TCR; /**< \brief (Usart Offset: 0x10C) Transmit Counter Register */
+ RwReg US_RNPR; /**< \brief (Usart Offset: 0x110) Receive Next Pointer Register */
+ RwReg US_RNCR; /**< \brief (Usart Offset: 0x114) Receive Next Counter Register */
+ RwReg US_TNPR; /**< \brief (Usart Offset: 0x118) Transmit Next Pointer Register */
+ RwReg US_TNCR; /**< \brief (Usart Offset: 0x11C) Transmit Next Counter Register */
+ WoReg US_PTCR; /**< \brief (Usart Offset: 0x120) Transfer Control Register */
+ RoReg US_PTSR; /**< \brief (Usart Offset: 0x124) Transfer Status Register */
+} Usart;
+#endif /* __ASSEMBLY__ */
+/* -------- US_CR : (USART Offset: 0x0000) Control Register -------- */
+#define US_CR_RSTRX (0x1u << 2) /**< \brief (US_CR) Reset Receiver */
+#define US_CR_RSTTX (0x1u << 3) /**< \brief (US_CR) Reset Transmitter */
+#define US_CR_RXEN (0x1u << 4) /**< \brief (US_CR) Receiver Enable */
+#define US_CR_RXDIS (0x1u << 5) /**< \brief (US_CR) Receiver Disable */
+#define US_CR_TXEN (0x1u << 6) /**< \brief (US_CR) Transmitter Enable */
+#define US_CR_TXDIS (0x1u << 7) /**< \brief (US_CR) Transmitter Disable */
+#define US_CR_RSTSTA (0x1u << 8) /**< \brief (US_CR) Reset Status Bits */
+#define US_CR_STTBRK (0x1u << 9) /**< \brief (US_CR) Start Break */
+#define US_CR_STPBRK (0x1u << 10) /**< \brief (US_CR) Stop Break */
+#define US_CR_STTTO (0x1u << 11) /**< \brief (US_CR) Start Time-out */
+#define US_CR_SENDA (0x1u << 12) /**< \brief (US_CR) Send Address */
+#define US_CR_RSTIT (0x1u << 13) /**< \brief (US_CR) Reset Iterations */
+#define US_CR_RSTNACK (0x1u << 14) /**< \brief (US_CR) Reset Non Acknowledge */
+#define US_CR_RETTO (0x1u << 15) /**< \brief (US_CR) Rearm Time-out */
+#define US_CR_DTREN (0x1u << 16) /**< \brief (US_CR) Data Terminal Ready Enable */
+#define US_CR_DTRDIS (0x1u << 17) /**< \brief (US_CR) Data Terminal Ready Disable */
+#define US_CR_RTSEN (0x1u << 18) /**< \brief (US_CR) Request to Send Enable */
+#define US_CR_FCS (0x1u << 18) /**< \brief (US_CR) Force SPI Chip Select */
+#define US_CR_RTSDIS (0x1u << 19) /**< \brief (US_CR) Request to Send Disable */
+#define US_CR_RCS (0x1u << 19) /**< \brief (US_CR) Release SPI Chip Select */
+/* -------- US_MR : (USART Offset: 0x0004) Mode Register -------- */
+#define US_MR_USART_MODE_Pos 0
+#define US_MR_USART_MODE_Msk (0xfu << US_MR_USART_MODE_Pos) /**< \brief (US_MR) */
+#define US_MR_USART_MODE_NORMAL (0x0u << 0) /**< \brief (US_MR) Normal mode */
+#define US_MR_USART_MODE_RS485 (0x1u << 0) /**< \brief (US_MR) RS485 */
+#define US_MR_USART_MODE_HW_HANDSHAKING (0x2u << 0) /**< \brief (US_MR) Hardware Handshaking */
+#define US_MR_USART_MODE_MODEM (0x3u << 0) /**< \brief (US_MR) Modem */
+#define US_MR_USART_MODE_IS07816_T_0 (0x4u << 0) /**< \brief (US_MR) IS07816 Protocol: T = 0 */
+#define US_MR_USART_MODE_IS07816_T_1 (0x6u << 0) /**< \brief (US_MR) IS07816 Protocol: T = 1 */
+#define US_MR_USART_MODE_IRDA (0x8u << 0) /**< \brief (US_MR) IrDA */
+#define US_MR_USART_MODE_SPI_MASTER (0xEu << 0) /**< \brief (US_MR) SPI Master */
+#define US_MR_USART_MODE_SPI_SLAVE (0xFu << 0) /**< \brief (US_MR) SPI Slave */
+#define US_MR_USCLKS_Pos 4
+#define US_MR_USCLKS_Msk (0x3u << US_MR_USCLKS_Pos) /**< \brief (US_MR) Clock Selection */
+#define US_MR_USCLKS_MCK (0x0u << 4) /**< \brief (US_MR) Master Clock MCK is selected */
+#define US_MR_USCLKS_DIV (0x1u << 4) /**< \brief (US_MR) Internal Clock Divided MCK/DIV (DIV=8) is selected */
+#define US_MR_USCLKS_SCK (0x3u << 4) /**< \brief (US_MR) Serial Clock SLK is selected */
+#define US_MR_CHRL_Pos 6
+#define US_MR_CHRL_Msk (0x3u << US_MR_CHRL_Pos) /**< \brief (US_MR) Character Length. */
+#define US_MR_CHRL_5_BIT (0x0u << 6) /**< \brief (US_MR) Character length is 5 bits */
+#define US_MR_CHRL_6_BIT (0x1u << 6) /**< \brief (US_MR) Character length is 6 bits */
+#define US_MR_CHRL_7_BIT (0x2u << 6) /**< \brief (US_MR) Character length is 7 bits */
+#define US_MR_CHRL_8_BIT (0x3u << 6) /**< \brief (US_MR) Character length is 8 bits */
+#define US_MR_SYNC (0x1u << 8) /**< \brief (US_MR) Synchronous Mode Select */
+#define US_MR_CPHA (0x1u << 8) /**< \brief (US_MR) SPI Clock Phase */
+#define US_MR_PAR_Pos 9
+#define US_MR_PAR_Msk (0x7u << US_MR_PAR_Pos) /**< \brief (US_MR) Parity Type */
+#define US_MR_PAR_EVEN (0x0u << 9) /**< \brief (US_MR) Even parity */
+#define US_MR_PAR_ODD (0x1u << 9) /**< \brief (US_MR) Odd parity */
+#define US_MR_PAR_SPACE (0x2u << 9) /**< \brief (US_MR) Parity forced to 0 (Space) */
+#define US_MR_PAR_MARK (0x3u << 9) /**< \brief (US_MR) Parity forced to 1 (Mark) */
+#define US_MR_PAR_NO (0x4u << 9) /**< \brief (US_MR) No parity */
+#define US_MR_PAR_MULTIDROP (0x6u << 9) /**< \brief (US_MR) Multidrop mode */
+#define US_MR_NBSTOP_Pos 12
+#define US_MR_NBSTOP_Msk (0x3u << US_MR_NBSTOP_Pos) /**< \brief (US_MR) Number of Stop Bits */
+#define US_MR_NBSTOP_1_BIT (0x0u << 12) /**< \brief (US_MR) 1 stop bit */
+#define US_MR_NBSTOP_1_5_BIT (0x1u << 12) /**< \brief (US_MR) 1.5 stop bit (SYNC = 0) or reserved (SYNC = 1) */
+#define US_MR_NBSTOP_2_BIT (0x2u << 12) /**< \brief (US_MR) 2 stop bits */
+#define US_MR_CHMODE_Pos 14
+#define US_MR_CHMODE_Msk (0x3u << US_MR_CHMODE_Pos) /**< \brief (US_MR) Channel Mode */
+#define US_MR_CHMODE_NORMAL (0x0u << 14) /**< \brief (US_MR) Normal Mode */
+#define US_MR_CHMODE_AUTOMATIC (0x1u << 14) /**< \brief (US_MR) Automatic Echo. Receiver input is connected to the TXD pin. */
+#define US_MR_CHMODE_LOCAL_LOOPBACK (0x2u << 14) /**< \brief (US_MR) Local Loopback. Transmitter output is connected to the Receiver Input. */
+#define US_MR_CHMODE_REMOTE_LOOPBACK (0x3u << 14) /**< \brief (US_MR) Remote Loopback. RXD pin is internally connected to the TXD pin. */
+#define US_MR_MSBF (0x1u << 16) /**< \brief (US_MR) Bit Order */
+#define US_MR_CPOL (0x1u << 16) /**< \brief (US_MR) SPI Clock Polarity */
+#define US_MR_MODE9 (0x1u << 17) /**< \brief (US_MR) 9-bit Character Length */
+#define US_MR_CLKO (0x1u << 18) /**< \brief (US_MR) Clock Output Select */
+#define US_MR_OVER (0x1u << 19) /**< \brief (US_MR) Oversampling Mode */
+#define US_MR_INACK (0x1u << 20) /**< \brief (US_MR) Inhibit Non Acknowledge */
+#define US_MR_DSNACK (0x1u << 21) /**< \brief (US_MR) Disable Successive NACK */
+#define US_MR_VAR_SYNC (0x1u << 22) /**< \brief (US_MR) Variable Synchronization of Command/Data Sync Start Frame Delimiter */
+#define US_MR_INVDATA (0x1u << 23) /**< \brief (US_MR) INverted Data */
+#define US_MR_MAX_ITERATION_Pos 24
+#define US_MR_MAX_ITERATION_Msk (0x7u << US_MR_MAX_ITERATION_Pos) /**< \brief (US_MR) */
+#define US_MR_MAX_ITERATION(value) ((US_MR_MAX_ITERATION_Msk & ((value) << US_MR_MAX_ITERATION_Pos)))
+#define US_MR_FILTER (0x1u << 28) /**< \brief (US_MR) Infrared Receive Line Filter */
+#define US_MR_MAN (0x1u << 29) /**< \brief (US_MR) Manchester Encoder/Decoder Enable */
+#define US_MR_MODSYNC (0x1u << 30) /**< \brief (US_MR) Manchester Synchronization Mode */
+#define US_MR_ONEBIT (0x1u << 31) /**< \brief (US_MR) Start Frame Delimiter Selector */
+/* -------- US_IER : (USART Offset: 0x0008) Interrupt Enable Register -------- */
+#define US_IER_RXRDY (0x1u << 0) /**< \brief (US_IER) RXRDY Interrupt Enable */
+#define US_IER_TXRDY (0x1u << 1) /**< \brief (US_IER) TXRDY Interrupt Enable */
+#define US_IER_RXBRK (0x1u << 2) /**< \brief (US_IER) Receiver Break Interrupt Enable */
+#define US_IER_ENDRX (0x1u << 3) /**< \brief (US_IER) End of Receive Transfer Interrupt Enable */
+#define US_IER_ENDTX (0x1u << 4) /**< \brief (US_IER) End of Transmit Interrupt Enable */
+#define US_IER_OVRE (0x1u << 5) /**< \brief (US_IER) Overrun Error Interrupt Enable */
+#define US_IER_FRAME (0x1u << 6) /**< \brief (US_IER) Framing Error Interrupt Enable */
+#define US_IER_PARE (0x1u << 7) /**< \brief (US_IER) Parity Error Interrupt Enable */
+#define US_IER_TIMEOUT (0x1u << 8) /**< \brief (US_IER) Time-out Interrupt Enable */
+#define US_IER_TXEMPTY (0x1u << 9) /**< \brief (US_IER) TXEMPTY Interrupt Enable */
+#define US_IER_ITER (0x1u << 10) /**< \brief (US_IER) Max number of Repetitions Reached */
+#define US_IER_UNRE (0x1u << 10) /**< \brief (US_IER) SPI Underrun Error */
+#define US_IER_TXBUFE (0x1u << 11) /**< \brief (US_IER) Buffer Empty Interrupt Enable */
+#define US_IER_RXBUFF (0x1u << 12) /**< \brief (US_IER) Buffer Full Interrupt Enable */
+#define US_IER_NACK (0x1u << 13) /**< \brief (US_IER) Non AcknowledgeInterrupt Enable */
+#define US_IER_RIIC (0x1u << 16) /**< \brief (US_IER) Ring Indicator Input Change Enable */
+#define US_IER_DSRIC (0x1u << 17) /**< \brief (US_IER) Data Set Ready Input Change Enable */
+#define US_IER_DCDIC (0x1u << 18) /**< \brief (US_IER) Data Carrier Detect Input Change Interrupt Enable */
+#define US_IER_CTSIC (0x1u << 19) /**< \brief (US_IER) Clear to Send Input Change Interrupt Enable */
+#define US_IER_MANE (0x1u << 24) /**< \brief (US_IER) Manchester Error Interrupt Enable */
+/* -------- US_IDR : (USART Offset: 0x000C) Interrupt Disable Register -------- */
+#define US_IDR_RXRDY (0x1u << 0) /**< \brief (US_IDR) RXRDY Interrupt Disable */
+#define US_IDR_TXRDY (0x1u << 1) /**< \brief (US_IDR) TXRDY Interrupt Disable */
+#define US_IDR_RXBRK (0x1u << 2) /**< \brief (US_IDR) Receiver Break Interrupt Disable */
+#define US_IDR_ENDRX (0x1u << 3) /**< \brief (US_IDR) End of Receive Transfer Interrupt Disable */
+#define US_IDR_ENDTX (0x1u << 4) /**< \brief (US_IDR) End of Transmit Interrupt Disable */
+#define US_IDR_OVRE (0x1u << 5) /**< \brief (US_IDR) Overrun Error Interrupt Disable */
+#define US_IDR_FRAME (0x1u << 6) /**< \brief (US_IDR) Framing Error Interrupt Disable */
+#define US_IDR_PARE (0x1u << 7) /**< \brief (US_IDR) Parity Error Interrupt Disable */
+#define US_IDR_TIMEOUT (0x1u << 8) /**< \brief (US_IDR) Time-out Interrupt Disable */
+#define US_IDR_TXEMPTY (0x1u << 9) /**< \brief (US_IDR) TXEMPTY Interrupt Disable */
+#define US_IDR_ITER (0x1u << 10) /**< \brief (US_IDR) Max number of Repetitions Reached Disable */
+#define US_IDR_UNRE (0x1u << 10) /**< \brief (US_IDR) SPI Underrun Error Disable */
+#define US_IDR_TXBUFE (0x1u << 11) /**< \brief (US_IDR) Buffer Empty Interrupt Disable */
+#define US_IDR_RXBUFF (0x1u << 12) /**< \brief (US_IDR) Buffer Full Interrupt Disable */
+#define US_IDR_NACK (0x1u << 13) /**< \brief (US_IDR) Non AcknowledgeInterrupt Disable */
+#define US_IDR_RIIC (0x1u << 16) /**< \brief (US_IDR) Ring Indicator Input Change Disable */
+#define US_IDR_DSRIC (0x1u << 17) /**< \brief (US_IDR) Data Set Ready Input Change Disable */
+#define US_IDR_DCDIC (0x1u << 18) /**< \brief (US_IDR) Data Carrier Detect Input Change Interrupt Disable */
+#define US_IDR_CTSIC (0x1u << 19) /**< \brief (US_IDR) Clear to Send Input Change Interrupt Disable */
+#define US_IDR_MANE (0x1u << 24) /**< \brief (US_IDR) Manchester Error Interrupt Disable */
+/* -------- US_IMR : (USART Offset: 0x0010) Interrupt Mask Register -------- */
+#define US_IMR_RXRDY (0x1u << 0) /**< \brief (US_IMR) RXRDY Interrupt Mask */
+#define US_IMR_TXRDY (0x1u << 1) /**< \brief (US_IMR) TXRDY Interrupt Mask */
+#define US_IMR_RXBRK (0x1u << 2) /**< \brief (US_IMR) Receiver Break Interrupt Mask */
+#define US_IMR_ENDRX (0x1u << 3) /**< \brief (US_IMR) End of Receive Transfer Interrupt Mask */
+#define US_IMR_ENDTX (0x1u << 4) /**< \brief (US_IMR) End of Transmit Interrupt Mask */
+#define US_IMR_OVRE (0x1u << 5) /**< \brief (US_IMR) Overrun Error Interrupt Mask */
+#define US_IMR_FRAME (0x1u << 6) /**< \brief (US_IMR) Framing Error Interrupt Mask */
+#define US_IMR_PARE (0x1u << 7) /**< \brief (US_IMR) Parity Error Interrupt Mask */
+#define US_IMR_TIMEOUT (0x1u << 8) /**< \brief (US_IMR) Time-out Interrupt Mask */
+#define US_IMR_TXEMPTY (0x1u << 9) /**< \brief (US_IMR) TXEMPTY Interrupt Mask */
+#define US_IMR_ITER (0x1u << 10) /**< \brief (US_IMR) Max number of Repetitions Reached Mask */
+#define US_IMR_UNRE (0x1u << 10) /**< \brief (US_IMR) SPI Underrun Error Mask */
+#define US_IMR_TXBUFE (0x1u << 11) /**< \brief (US_IMR) Buffer Empty Interrupt Mask */
+#define US_IMR_RXBUFF (0x1u << 12) /**< \brief (US_IMR) Buffer Full Interrupt Mask */
+#define US_IMR_NACK (0x1u << 13) /**< \brief (US_IMR) Non AcknowledgeInterrupt Mask */
+#define US_IMR_RIIC (0x1u << 16) /**< \brief (US_IMR) Ring Indicator Input Change Mask */
+#define US_IMR_DSRIC (0x1u << 17) /**< \brief (US_IMR) Data Set Ready Input Change Mask */
+#define US_IMR_DCDIC (0x1u << 18) /**< \brief (US_IMR) Data Carrier Detect Input Change Interrupt Mask */
+#define US_IMR_CTSIC (0x1u << 19) /**< \brief (US_IMR) Clear to Send Input Change Interrupt Mask */
+#define US_IMR_MANE (0x1u << 24) /**< \brief (US_IMR) Manchester Error Interrupt Mask */
+/* -------- US_CSR : (USART Offset: 0x0014) Channel Status Register -------- */
+#define US_CSR_RXRDY (0x1u << 0) /**< \brief (US_CSR) Receiver Ready */
+#define US_CSR_TXRDY (0x1u << 1) /**< \brief (US_CSR) Transmitter Ready */
+#define US_CSR_RXBRK (0x1u << 2) /**< \brief (US_CSR) Break Received/End of Break */
+#define US_CSR_ENDRX (0x1u << 3) /**< \brief (US_CSR) End of Receiver Transfer */
+#define US_CSR_ENDTX (0x1u << 4) /**< \brief (US_CSR) End of Transmitter Transfer */
+#define US_CSR_OVRE (0x1u << 5) /**< \brief (US_CSR) Overrun Error */
+#define US_CSR_FRAME (0x1u << 6) /**< \brief (US_CSR) Framing Error */
+#define US_CSR_PARE (0x1u << 7) /**< \brief (US_CSR) Parity Error */
+#define US_CSR_TIMEOUT (0x1u << 8) /**< \brief (US_CSR) Receiver Time-out */
+#define US_CSR_TXEMPTY (0x1u << 9) /**< \brief (US_CSR) Transmitter Empty */
+#define US_CSR_ITER (0x1u << 10) /**< \brief (US_CSR) Max number of Repetitions Reached */
+#define US_CSR_UNRE (0x1u << 10) /**< \brief (US_CSR) SPI Underrun Error */
+#define US_CSR_TXBUFE (0x1u << 11) /**< \brief (US_CSR) Transmission Buffer Empty */
+#define US_CSR_RXBUFF (0x1u << 12) /**< \brief (US_CSR) Reception Buffer Full */
+#define US_CSR_NACK (0x1u << 13) /**< \brief (US_CSR) Non AcknowledgeInterrupt */
+#define US_CSR_RIIC (0x1u << 16) /**< \brief (US_CSR) Ring Indicator Input Change Flag */
+#define US_CSR_DSRIC (0x1u << 17) /**< \brief (US_CSR) Data Set Ready Input Change Flag */
+#define US_CSR_DCDIC (0x1u << 18) /**< \brief (US_CSR) Data Carrier Detect Input Change Flag */
+#define US_CSR_CTSIC (0x1u << 19) /**< \brief (US_CSR) Clear to Send Input Change Flag */
+#define US_CSR_RI (0x1u << 20) /**< \brief (US_CSR) Image of RI Input */
+#define US_CSR_DSR (0x1u << 21) /**< \brief (US_CSR) Image of DSR Input */
+#define US_CSR_DCD (0x1u << 22) /**< \brief (US_CSR) Image of DCD Input */
+#define US_CSR_CTS (0x1u << 23) /**< \brief (US_CSR) Image of CTS Input */
+#define US_CSR_MANERR (0x1u << 24) /**< \brief (US_CSR) Manchester Error */
+/* -------- US_RHR : (USART Offset: 0x0018) Receiver Holding Register -------- */
+#define US_RHR_RXCHR_Pos 0
+#define US_RHR_RXCHR_Msk (0x1ffu << US_RHR_RXCHR_Pos) /**< \brief (US_RHR) Received Character */
+#define US_RHR_RXSYNH (0x1u << 15) /**< \brief (US_RHR) Received Sync */
+/* -------- US_THR : (USART Offset: 0x001C) Transmitter Holding Register -------- */
+#define US_THR_TXCHR_Pos 0
+#define US_THR_TXCHR_Msk (0x1ffu << US_THR_TXCHR_Pos) /**< \brief (US_THR) Character to be Transmitted */
+#define US_THR_TXCHR(value) ((US_THR_TXCHR_Msk & ((value) << US_THR_TXCHR_Pos)))
+#define US_THR_TXSYNH (0x1u << 15) /**< \brief (US_THR) Sync Field to be transmitted */
+/* -------- US_BRGR : (USART Offset: 0x0020) Baud Rate Generator Register -------- */
+#define US_BRGR_CD_Pos 0
+#define US_BRGR_CD_Msk (0xffffu << US_BRGR_CD_Pos) /**< \brief (US_BRGR) Clock Divider */
+#define US_BRGR_CD(value) ((US_BRGR_CD_Msk & ((value) << US_BRGR_CD_Pos)))
+#define US_BRGR_FP_Pos 16
+#define US_BRGR_FP_Msk (0x7u << US_BRGR_FP_Pos) /**< \brief (US_BRGR) Fractional Part */
+#define US_BRGR_FP(value) ((US_BRGR_FP_Msk & ((value) << US_BRGR_FP_Pos)))
+/* -------- US_RTOR : (USART Offset: 0x0024) Receiver Time-out Register -------- */
+#define US_RTOR_TO_Pos 0
+#define US_RTOR_TO_Msk (0xffffu << US_RTOR_TO_Pos) /**< \brief (US_RTOR) Time-out Value */
+#define US_RTOR_TO(value) ((US_RTOR_TO_Msk & ((value) << US_RTOR_TO_Pos)))
+/* -------- US_TTGR : (USART Offset: 0x0028) Transmitter Timeguard Register -------- */
+#define US_TTGR_TG_Pos 0
+#define US_TTGR_TG_Msk (0xffu << US_TTGR_TG_Pos) /**< \brief (US_TTGR) Timeguard Value */
+#define US_TTGR_TG(value) ((US_TTGR_TG_Msk & ((value) << US_TTGR_TG_Pos)))
+/* -------- US_FIDI : (USART Offset: 0x0040) FI DI Ratio Register -------- */
+#define US_FIDI_FI_DI_RATIO_Pos 0
+#define US_FIDI_FI_DI_RATIO_Msk (0x7ffu << US_FIDI_FI_DI_RATIO_Pos) /**< \brief (US_FIDI) FI Over DI Ratio Value */
+#define US_FIDI_FI_DI_RATIO(value) ((US_FIDI_FI_DI_RATIO_Msk & ((value) << US_FIDI_FI_DI_RATIO_Pos)))
+/* -------- US_NER : (USART Offset: 0x0044) Number of Errors Register -------- */
+#define US_NER_NB_ERRORS_Pos 0
+#define US_NER_NB_ERRORS_Msk (0xffu << US_NER_NB_ERRORS_Pos) /**< \brief (US_NER) Number of Errors */
+/* -------- US_IF : (USART Offset: 0x004C) IrDA Filter Register -------- */
+#define US_IF_IRDA_FILTER_Pos 0
+#define US_IF_IRDA_FILTER_Msk (0xffu << US_IF_IRDA_FILTER_Pos) /**< \brief (US_IF) IrDA Filter */
+#define US_IF_IRDA_FILTER(value) ((US_IF_IRDA_FILTER_Msk & ((value) << US_IF_IRDA_FILTER_Pos)))
+/* -------- US_MAN : (USART Offset: 0x0050) Manchester Encoder Decoder Register -------- */
+#define US_MAN_TX_PL_Pos 0
+#define US_MAN_TX_PL_Msk (0xfu << US_MAN_TX_PL_Pos) /**< \brief (US_MAN) Transmitter Preamble Length */
+#define US_MAN_TX_PL(value) ((US_MAN_TX_PL_Msk & ((value) << US_MAN_TX_PL_Pos)))
+#define US_MAN_TX_PP_Pos 8
+#define US_MAN_TX_PP_Msk (0x3u << US_MAN_TX_PP_Pos) /**< \brief (US_MAN) Transmitter Preamble Pattern */
+#define US_MAN_TX_PP_ALL_ONE (0x0u << 8) /**< \brief (US_MAN) The preamble is composed of '1's */
+#define US_MAN_TX_PP_ALL_ZERO (0x1u << 8) /**< \brief (US_MAN) The preamble is composed of '0's */
+#define US_MAN_TX_PP_ZERO_ONE (0x2u << 8) /**< \brief (US_MAN) The preamble is composed of '01's */
+#define US_MAN_TX_PP_ONE_ZERO (0x3u << 8) /**< \brief (US_MAN) The preamble is composed of '10's */
+#define US_MAN_TX_MPOL (0x1u << 12) /**< \brief (US_MAN) Transmitter Manchester Polarity */
+#define US_MAN_RX_PL_Pos 16
+#define US_MAN_RX_PL_Msk (0xfu << US_MAN_RX_PL_Pos) /**< \brief (US_MAN) Receiver Preamble Length */
+#define US_MAN_RX_PL(value) ((US_MAN_RX_PL_Msk & ((value) << US_MAN_RX_PL_Pos)))
+#define US_MAN_RX_PP_Pos 24
+#define US_MAN_RX_PP_Msk (0x3u << US_MAN_RX_PP_Pos) /**< \brief (US_MAN) Receiver Preamble Pattern detected */
+#define US_MAN_RX_PP_ALL_ONE (0x0u << 24) /**< \brief (US_MAN) The preamble is composed of '1's */
+#define US_MAN_RX_PP_ALL_ZERO (0x1u << 24) /**< \brief (US_MAN) The preamble is composed of '0's */
+#define US_MAN_RX_PP_ZERO_ONE (0x2u << 24) /**< \brief (US_MAN) The preamble is composed of '01's */
+#define US_MAN_RX_PP_ONE_ZERO (0x3u << 24) /**< \brief (US_MAN) The preamble is composed of '10's */
+#define US_MAN_RX_MPOL (0x1u << 28) /**< \brief (US_MAN) Receiver Manchester Polarity */
+#define US_MAN_STUCKTO1 (0x1u << 29) /**< \brief (US_MAN) */
+#define US_MAN_DRIFT (0x1u << 30) /**< \brief (US_MAN) Drift compensation */
+/* -------- US_WPMR : (USART Offset: 0xE4) Write Protect Mode Register -------- */
+#define US_WPMR_WPEN (0x1u << 0) /**< \brief (US_WPMR) Write Protect Enable */
+#define US_WPMR_WPKEY_Pos 8
+#define US_WPMR_WPKEY_Msk (0xffffffu << US_WPMR_WPKEY_Pos) /**< \brief (US_WPMR) Write Protect KEY */
+#define US_WPMR_WPKEY(value) ((US_WPMR_WPKEY_Msk & ((value) << US_WPMR_WPKEY_Pos)))
+/* -------- US_WPSR : (USART Offset: 0xE8) Write Protect Status Register -------- */
+#define US_WPSR_WPVS (0x1u << 0) /**< \brief (US_WPSR) Write Protect Violation Status */
+#define US_WPSR_WPVSRC_Pos 8
+#define US_WPSR_WPVSRC_Msk (0xffffu << US_WPSR_WPVSRC_Pos) /**< \brief (US_WPSR) Write Protect Violation Source */
+/* -------- US_RPR : (USART Offset: 0x100) Receive Pointer Register -------- */
+#define US_RPR_RXPTR_Pos 0
+#define US_RPR_RXPTR_Msk (0xffffffffu << US_RPR_RXPTR_Pos) /**< \brief (US_RPR) Receive Pointer Register */
+#define US_RPR_RXPTR(value) ((US_RPR_RXPTR_Msk & ((value) << US_RPR_RXPTR_Pos)))
+/* -------- US_RCR : (USART Offset: 0x104) Receive Counter Register -------- */
+#define US_RCR_RXCTR_Pos 0
+#define US_RCR_RXCTR_Msk (0xffffu << US_RCR_RXCTR_Pos) /**< \brief (US_RCR) Receive Counter Register */
+#define US_RCR_RXCTR(value) ((US_RCR_RXCTR_Msk & ((value) << US_RCR_RXCTR_Pos)))
+/* -------- US_TPR : (USART Offset: 0x108) Transmit Pointer Register -------- */
+#define US_TPR_TXPTR_Pos 0
+#define US_TPR_TXPTR_Msk (0xffffffffu << US_TPR_TXPTR_Pos) /**< \brief (US_TPR) Transmit Counter Register */
+#define US_TPR_TXPTR(value) ((US_TPR_TXPTR_Msk & ((value) << US_TPR_TXPTR_Pos)))
+/* -------- US_TCR : (USART Offset: 0x10C) Transmit Counter Register -------- */
+#define US_TCR_TXCTR_Pos 0
+#define US_TCR_TXCTR_Msk (0xffffu << US_TCR_TXCTR_Pos) /**< \brief (US_TCR) Transmit Counter Register */
+#define US_TCR_TXCTR(value) ((US_TCR_TXCTR_Msk & ((value) << US_TCR_TXCTR_Pos)))
+/* -------- US_RNPR : (USART Offset: 0x110) Receive Next Pointer Register -------- */
+#define US_RNPR_RXNPTR_Pos 0
+#define US_RNPR_RXNPTR_Msk (0xffffffffu << US_RNPR_RXNPTR_Pos) /**< \brief (US_RNPR) Receive Next Pointer */
+#define US_RNPR_RXNPTR(value) ((US_RNPR_RXNPTR_Msk & ((value) << US_RNPR_RXNPTR_Pos)))
+/* -------- US_RNCR : (USART Offset: 0x114) Receive Next Counter Register -------- */
+#define US_RNCR_RXNCTR_Pos 0
+#define US_RNCR_RXNCTR_Msk (0xffffu << US_RNCR_RXNCTR_Pos) /**< \brief (US_RNCR) Receive Next Counter */
+#define US_RNCR_RXNCTR(value) ((US_RNCR_RXNCTR_Msk & ((value) << US_RNCR_RXNCTR_Pos)))
+/* -------- US_TNPR : (USART Offset: 0x118) Transmit Next Pointer Register -------- */
+#define US_TNPR_TXNPTR_Pos 0
+#define US_TNPR_TXNPTR_Msk (0xffffffffu << US_TNPR_TXNPTR_Pos) /**< \brief (US_TNPR) Transmit Next Pointer */
+#define US_TNPR_TXNPTR(value) ((US_TNPR_TXNPTR_Msk & ((value) << US_TNPR_TXNPTR_Pos)))
+/* -------- US_TNCR : (USART Offset: 0x11C) Transmit Next Counter Register -------- */
+#define US_TNCR_TXNCTR_Pos 0
+#define US_TNCR_TXNCTR_Msk (0xffffu << US_TNCR_TXNCTR_Pos) /**< \brief (US_TNCR) Transmit Counter Next */
+#define US_TNCR_TXNCTR(value) ((US_TNCR_TXNCTR_Msk & ((value) << US_TNCR_TXNCTR_Pos)))
+/* -------- US_PTCR : (USART Offset: 0x120) Transfer Control Register -------- */
+#define US_PTCR_RXTEN (0x1u << 0) /**< \brief (US_PTCR) Receiver Transfer Enable */
+#define US_PTCR_RXTDIS (0x1u << 1) /**< \brief (US_PTCR) Receiver Transfer Disable */
+#define US_PTCR_TXTEN (0x1u << 8) /**< \brief (US_PTCR) Transmitter Transfer Enable */
+#define US_PTCR_TXTDIS (0x1u << 9) /**< \brief (US_PTCR) Transmitter Transfer Disable */
+/* -------- US_PTSR : (USART Offset: 0x124) Transfer Status Register -------- */
+#define US_PTSR_RXTEN (0x1u << 0) /**< \brief (US_PTSR) Receiver Transfer Enable */
+#define US_PTSR_TXTEN (0x1u << 8) /**< \brief (US_PTSR) Transmitter Transfer Enable */
+
+/*@}*/
+
+/* ============================================================================= */
+/** SOFTWARE API DEFINITION FOR Watchdog Timer */
+/* ============================================================================= */
+/** \addtogroup SAM3S_WDT Watchdog Timer */
+/*@{*/
+
+#ifndef __ASSEMBLY__
+/** \brief Wdt hardware registers */
+typedef struct {
+ WoReg WDT_CR; /**< \brief (Wdt Offset: 0x00) Control Register */
+ RwReg WDT_MR; /**< \brief (Wdt Offset: 0x04) Mode Register */
+ RoReg WDT_SR; /**< \brief (Wdt Offset: 0x08) Status Register */
+} Wdt;
+#endif /* __ASSEMBLY__ */
+/* -------- WDT_CR : (WDT Offset: 0x00) Control Register -------- */
+#define WDT_CR_WDRSTT (0x1u << 0) /**< \brief (WDT_CR) Watchdog Restart */
+#define WDT_CR_KEY_Pos 24
+#define WDT_CR_KEY_Msk (0xffu << WDT_CR_KEY_Pos) /**< \brief (WDT_CR) Password */
+#define WDT_CR_KEY(value) ((WDT_CR_KEY_Msk & ((value) << WDT_CR_KEY_Pos)))
+/* -------- WDT_MR : (WDT Offset: 0x04) Mode Register -------- */
+#define WDT_MR_WDV_Pos 0
+#define WDT_MR_WDV_Msk (0xfffu << WDT_MR_WDV_Pos) /**< \brief (WDT_MR) Watchdog Counter Value */
+#define WDT_MR_WDV(value) ((WDT_MR_WDV_Msk & ((value) << WDT_MR_WDV_Pos)))
+#define WDT_MR_WDFIEN (0x1u << 12) /**< \brief (WDT_MR) Watchdog Fault Interrupt Enable */
+#define WDT_MR_WDRSTEN (0x1u << 13) /**< \brief (WDT_MR) Watchdog Reset Enable */
+#define WDT_MR_WDRPROC (0x1u << 14) /**< \brief (WDT_MR) Watchdog Reset Processor */
+#define WDT_MR_WDDIS (0x1u << 15) /**< \brief (WDT_MR) Watchdog Disable */
+#define WDT_MR_WDD_Pos 16
+#define WDT_MR_WDD_Msk (0xfffu << WDT_MR_WDD_Pos) /**< \brief (WDT_MR) Watchdog Delta Value */
+#define WDT_MR_WDD(value) ((WDT_MR_WDD_Msk & ((value) << WDT_MR_WDD_Pos)))
+#define WDT_MR_WDDBGHLT (0x1u << 28) /**< \brief (WDT_MR) Watchdog Debug Halt */
+#define WDT_MR_WDIDLEHLT (0x1u << 29) /**< \brief (WDT_MR) Watchdog Idle Halt */
+/* -------- WDT_SR : (WDT Offset: 0x08) Status Register -------- */
+#define WDT_SR_WDUNF (0x1u << 0) /**< \brief (WDT_SR) Watchdog Underflow */
+#define WDT_SR_WDERR (0x1u << 1) /**< \brief (WDT_SR) Watchdog Error */
+
+/*@}*/
+
+/*@}*/
+
+/* ************************************************************************** */
+/* REGISTER ACCESS DEFINITIONS FOR SAM3S */
+/* ************************************************************************** */
+/** \addtogroup SAM3S_reg Registers Access Definitions */
+/*@{*/
+
+/* ========== Register definition for HSMCI peripheral ========== */
+#define REG_HSMCI_CR REG_ACCESS(WoReg, 0x40000000U) /**< \brief (HSMCI) Control Register */
+#define REG_HSMCI_MR REG_ACCESS(RwReg, 0x40000004U) /**< \brief (HSMCI) Mode Register */
+#define REG_HSMCI_DTOR REG_ACCESS(RwReg, 0x40000008U) /**< \brief (HSMCI) Data Timeout Register */
+#define REG_HSMCI_SDCR REG_ACCESS(RwReg, 0x4000000CU) /**< \brief (HSMCI) SD/SDIO Card Register */
+#define REG_HSMCI_ARGR REG_ACCESS(RwReg, 0x40000010U) /**< \brief (HSMCI) Argument Register */
+#define REG_HSMCI_CMDR REG_ACCESS(WoReg, 0x40000014U) /**< \brief (HSMCI) Command Register */
+#define REG_HSMCI_BLKR REG_ACCESS(RwReg, 0x40000018U) /**< \brief (HSMCI) Block Register */
+#define REG_HSMCI_CSTOR REG_ACCESS(RwReg, 0x4000001CU) /**< \brief (HSMCI) Completion Signal Timeout Register */
+#define REG_HSMCI_RSPR REG_ACCESS(RoReg, 0x40000020U) /**< \brief (HSMCI) Response Register */
+#define REG_HSMCI_RDR REG_ACCESS(RoReg, 0x40000030U) /**< \brief (HSMCI) Receive Data Register */
+#define REG_HSMCI_TDR REG_ACCESS(WoReg, 0x40000034U) /**< \brief (HSMCI) Transmit Data Register */
+#define REG_HSMCI_SR REG_ACCESS(RoReg, 0x40000040U) /**< \brief (HSMCI) Status Register */
+#define REG_HSMCI_IER REG_ACCESS(WoReg, 0x40000044U) /**< \brief (HSMCI) Interrupt Enable Register */
+#define REG_HSMCI_IDR REG_ACCESS(WoReg, 0x40000048U) /**< \brief (HSMCI) Interrupt Disable Register */
+#define REG_HSMCI_IMR REG_ACCESS(RoReg, 0x4000004CU) /**< \brief (HSMCI) Interrupt Mask Register */
+#define REG_HSMCI_CFG REG_ACCESS(RwReg, 0x40000054U) /**< \brief (HSMCI) Configuration Register */
+#define REG_HSMCI_WPMR REG_ACCESS(RwReg, 0x400000E4U) /**< \brief (HSMCI) Write Protection Mode Register */
+#define REG_HSMCI_WPSR REG_ACCESS(RoReg, 0x400000E8U) /**< \brief (HSMCI) Write Protection Status Register */
+#define REG_HSMCI_RPR REG_ACCESS(RwReg, 0x40000100U) /**< \brief (HSMCI) Receive Pointer Register */
+#define REG_HSMCI_RCR REG_ACCESS(RwReg, 0x40000104U) /**< \brief (HSMCI) Receive Counter Register */
+#define REG_HSMCI_TPR REG_ACCESS(RwReg, 0x40000108U) /**< \brief (HSMCI) Transmit Pointer Register */
+#define REG_HSMCI_TCR REG_ACCESS(RwReg, 0x4000010CU) /**< \brief (HSMCI) Transmit Counter Register */
+#define REG_HSMCI_RNPR REG_ACCESS(RwReg, 0x40000110U) /**< \brief (HSMCI) Receive Next Pointer Register */
+#define REG_HSMCI_RNCR REG_ACCESS(RwReg, 0x40000114U) /**< \brief (HSMCI) Receive Next Counter Register */
+#define REG_HSMCI_TNPR REG_ACCESS(RwReg, 0x40000118U) /**< \brief (HSMCI) Transmit Next Pointer Register */
+#define REG_HSMCI_TNCR REG_ACCESS(RwReg, 0x4000011CU) /**< \brief (HSMCI) Transmit Next Counter Register */
+#define REG_HSMCI_PTCR REG_ACCESS(WoReg, 0x40000120U) /**< \brief (HSMCI) Transfer Control Register */
+#define REG_HSMCI_PTSR REG_ACCESS(RoReg, 0x40000124U) /**< \brief (HSMCI) Transfer Status Register */
+#define REG_HSMCI_FIFO REG_ACCESS(RwReg, 0x40000200U) /**< \brief (HSMCI) FIFO Memory Aperture0 */
+/* ========== Register definition for SSC peripheral ========== */
+#define REG_SSC_CR REG_ACCESS(WoReg, 0x40004000U) /**< \brief (SSC) Control Register */
+#define REG_SSC_CMR REG_ACCESS(RwReg, 0x40004004U) /**< \brief (SSC) Clock Mode Register */
+#define REG_SSC_RCMR REG_ACCESS(RwReg, 0x40004010U) /**< \brief (SSC) Receive Clock Mode Register */
+#define REG_SSC_RFMR REG_ACCESS(RwReg, 0x40004014U) /**< \brief (SSC) Receive Frame Mode Register */
+#define REG_SSC_TCMR REG_ACCESS(RwReg, 0x40004018U) /**< \brief (SSC) Transmit Clock Mode Register */
+#define REG_SSC_TFMR REG_ACCESS(RwReg, 0x4000401CU) /**< \brief (SSC) Transmit Frame Mode Register */
+#define REG_SSC_RHR REG_ACCESS(RoReg, 0x40004020U) /**< \brief (SSC) Receive Holding Register */
+#define REG_SSC_THR REG_ACCESS(WoReg, 0x40004024U) /**< \brief (SSC) Transmit Holding Register */
+#define REG_SSC_RSHR REG_ACCESS(RoReg, 0x40004030U) /**< \brief (SSC) Receive Sync. Holding Register */
+#define REG_SSC_TSHR REG_ACCESS(RwReg, 0x40004034U) /**< \brief (SSC) Transmit Sync. Holding Register */
+#define REG_SSC_RC0R REG_ACCESS(RwReg, 0x40004038U) /**< \brief (SSC) Receive Compare 0 Register */
+#define REG_SSC_RC1R REG_ACCESS(RwReg, 0x4000403CU) /**< \brief (SSC) Receive Compare 1 Register */
+#define REG_SSC_SR REG_ACCESS(RoReg, 0x40004040U) /**< \brief (SSC) Status Register */
+#define REG_SSC_IER REG_ACCESS(WoReg, 0x40004044U) /**< \brief (SSC) Interrupt Enable Register */
+#define REG_SSC_IDR REG_ACCESS(WoReg, 0x40004048U) /**< \brief (SSC) Interrupt Disable Register */
+#define REG_SSC_IMR REG_ACCESS(RoReg, 0x4000404CU) /**< \brief (SSC) Interrupt Mask Register */
+#define REG_SSC_WPMR REG_ACCESS(RwReg, 0x400040E4U) /**< \brief (SSC) Write Protect Mode Register */
+#define REG_SSC_WPSR REG_ACCESS(RoReg, 0x400040E8U) /**< \brief (SSC) Write Protect Status Register */
+#define REG_SSC_RPR REG_ACCESS(RwReg, 0x40004100U) /**< \brief (SSC) Receive Pointer Register */
+#define REG_SSC_RCR REG_ACCESS(RwReg, 0x40004104U) /**< \brief (SSC) Receive Counter Register */
+#define REG_SSC_TPR REG_ACCESS(RwReg, 0x40004108U) /**< \brief (SSC) Transmit Pointer Register */
+#define REG_SSC_TCR REG_ACCESS(RwReg, 0x4000410CU) /**< \brief (SSC) Transmit Counter Register */
+#define REG_SSC_RNPR REG_ACCESS(RwReg, 0x40004110U) /**< \brief (SSC) Receive Next Pointer Register */
+#define REG_SSC_RNCR REG_ACCESS(RwReg, 0x40004114U) /**< \brief (SSC) Receive Next Counter Register */
+#define REG_SSC_TNPR REG_ACCESS(RwReg, 0x40004118U) /**< \brief (SSC) Transmit Next Pointer Register */
+#define REG_SSC_TNCR REG_ACCESS(RwReg, 0x4000411CU) /**< \brief (SSC) Transmit Next Counter Register */
+#define REG_SSC_PTCR REG_ACCESS(WoReg, 0x40004120U) /**< \brief (SSC) Transfer Control Register */
+#define REG_SSC_PTSR REG_ACCESS(RoReg, 0x40004124U) /**< \brief (SSC) Transfer Status Register */
+/* ========== Register definition for SPI peripheral ========== */
+#define REG_SPI_CR REG_ACCESS(WoReg, 0x40008000U) /**< \brief (SPI) Control Register */
+#define REG_SPI_MR REG_ACCESS(RwReg, 0x40008004U) /**< \brief (SPI) Mode Register */
+#define REG_SPI_RDR REG_ACCESS(RoReg, 0x40008008U) /**< \brief (SPI) Receive Data Register */
+#define REG_SPI_TDR REG_ACCESS(WoReg, 0x4000800CU) /**< \brief (SPI) Transmit Data Register */
+#define REG_SPI_SR REG_ACCESS(RoReg, 0x40008010U) /**< \brief (SPI) Status Register */
+#define REG_SPI_IER REG_ACCESS(WoReg, 0x40008014U) /**< \brief (SPI) Interrupt Enable Register */
+#define REG_SPI_IDR REG_ACCESS(WoReg, 0x40008018U) /**< \brief (SPI) Interrupt Disable Register */
+#define REG_SPI_IMR REG_ACCESS(RoReg, 0x4000801CU) /**< \brief (SPI) Interrupt Mask Register */
+#define REG_SPI_CSR REG_ACCESS(RwReg, 0x40008030U) /**< \brief (SPI) Chip Select Register */
+#define REG_SPI_WPMR REG_ACCESS(RwReg, 0x400080E4U) /**< \brief (SPI) Write Protection Control Register */
+#define REG_SPI_WPSR REG_ACCESS(RoReg, 0x400080E8U) /**< \brief (SPI) Write Protection Status Register */
+#define REG_SPI_RPR REG_ACCESS(RwReg, 0x40008100U) /**< \brief (SPI) Receive Pointer Register */
+#define REG_SPI_RCR REG_ACCESS(RwReg, 0x40008104U) /**< \brief (SPI) Receive Counter Register */
+#define REG_SPI_TPR REG_ACCESS(RwReg, 0x40008108U) /**< \brief (SPI) Transmit Pointer Register */
+#define REG_SPI_TCR REG_ACCESS(RwReg, 0x4000810CU) /**< \brief (SPI) Transmit Counter Register */
+#define REG_SPI_RNPR REG_ACCESS(RwReg, 0x40008110U) /**< \brief (SPI) Receive Next Pointer Register */
+#define REG_SPI_RNCR REG_ACCESS(RwReg, 0x40008114U) /**< \brief (SPI) Receive Next Counter Register */
+#define REG_SPI_TNPR REG_ACCESS(RwReg, 0x40008118U) /**< \brief (SPI) Transmit Next Pointer Register */
+#define REG_SPI_TNCR REG_ACCESS(RwReg, 0x4000811CU) /**< \brief (SPI) Transmit Next Counter Register */
+#define REG_SPI_PTCR REG_ACCESS(WoReg, 0x40008120U) /**< \brief (SPI) Transfer Control Register */
+#define REG_SPI_PTSR REG_ACCESS(RoReg, 0x40008124U) /**< \brief (SPI) Transfer Status Register */
+/* ========== Register definition for TC0 peripheral ========== */
+#define REG_TC0_CCR0 REG_ACCESS(WoReg, 0x40010000U) /**< \brief (TC0) Channel Control Register (channel = 0) */
+#define REG_TC0_CMR0 REG_ACCESS(RwReg, 0x40010004U) /**< \brief (TC0) Channel Mode Register (channel = 0) */
+#define REG_TC0_SMMR0 REG_ACCESS(RwReg, 0x40010008U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 0) */
+#define REG_TC0_CV0 REG_ACCESS(RoReg, 0x40010010U) /**< \brief (TC0) Counter Value (channel = 0) */
+#define REG_TC0_RA0 REG_ACCESS(RwReg, 0x40010014U) /**< \brief (TC0) Register A (channel = 0) */
+#define REG_TC0_RB0 REG_ACCESS(RwReg, 0x40010018U) /**< \brief (TC0) Register B (channel = 0) */
+#define REG_TC0_RC0 REG_ACCESS(RwReg, 0x4001001CU) /**< \brief (TC0) Register C (channel = 0) */
+#define REG_TC0_SR0 REG_ACCESS(RoReg, 0x40010020U) /**< \brief (TC0) Status Register (channel = 0) */
+#define REG_TC0_IER0 REG_ACCESS(WoReg, 0x40010024U) /**< \brief (TC0) Interrupt Enable Register (channel = 0) */
+#define REG_TC0_IDR0 REG_ACCESS(WoReg, 0x40010028U) /**< \brief (TC0) Interrupt Disable Register (channel = 0) */
+#define REG_TC0_IMR0 REG_ACCESS(RoReg, 0x4001002CU) /**< \brief (TC0) Interrupt Mask Register (channel = 0) */
+#define REG_TC0_CCR1 REG_ACCESS(WoReg, 0x40010040U) /**< \brief (TC0) Channel Control Register (channel = 1) */
+#define REG_TC0_CMR1 REG_ACCESS(RwReg, 0x40010044U) /**< \brief (TC0) Channel Mode Register (channel = 1) */
+#define REG_TC0_SMMR1 REG_ACCESS(RwReg, 0x40010048U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 1) */
+#define REG_TC0_CV1 REG_ACCESS(RoReg, 0x40010050U) /**< \brief (TC0) Counter Value (channel = 1) */
+#define REG_TC0_RA1 REG_ACCESS(RwReg, 0x40010054U) /**< \brief (TC0) Register A (channel = 1) */
+#define REG_TC0_RB1 REG_ACCESS(RwReg, 0x40010058U) /**< \brief (TC0) Register B (channel = 1) */
+#define REG_TC0_RC1 REG_ACCESS(RwReg, 0x4001005CU) /**< \brief (TC0) Register C (channel = 1) */
+#define REG_TC0_SR1 REG_ACCESS(RoReg, 0x40010060U) /**< \brief (TC0) Status Register (channel = 1) */
+#define REG_TC0_IER1 REG_ACCESS(WoReg, 0x40010064U) /**< \brief (TC0) Interrupt Enable Register (channel = 1) */
+#define REG_TC0_IDR1 REG_ACCESS(WoReg, 0x40010068U) /**< \brief (TC0) Interrupt Disable Register (channel = 1) */
+#define REG_TC0_IMR1 REG_ACCESS(RoReg, 0x4001006CU) /**< \brief (TC0) Interrupt Mask Register (channel = 1) */
+#define REG_TC0_CCR2 REG_ACCESS(WoReg, 0x40010080U) /**< \brief (TC0) Channel Control Register (channel = 2) */
+#define REG_TC0_CMR2 REG_ACCESS(RwReg, 0x40010084U) /**< \brief (TC0) Channel Mode Register (channel = 2) */
+#define REG_TC0_SMMR2 REG_ACCESS(RwReg, 0x40010088U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 2) */
+#define REG_TC0_CV2 REG_ACCESS(RoReg, 0x40010090U) /**< \brief (TC0) Counter Value (channel = 2) */
+#define REG_TC0_RA2 REG_ACCESS(RwReg, 0x40010094U) /**< \brief (TC0) Register A (channel = 2) */
+#define REG_TC0_RB2 REG_ACCESS(RwReg, 0x40010098U) /**< \brief (TC0) Register B (channel = 2) */
+#define REG_TC0_RC2 REG_ACCESS(RwReg, 0x4001009CU) /**< \brief (TC0) Register C (channel = 2) */
+#define REG_TC0_SR2 REG_ACCESS(RoReg, 0x400100A0U) /**< \brief (TC0) Status Register (channel = 2) */
+#define REG_TC0_IER2 REG_ACCESS(WoReg, 0x400100A4U) /**< \brief (TC0) Interrupt Enable Register (channel = 2) */
+#define REG_TC0_IDR2 REG_ACCESS(WoReg, 0x400100A8U) /**< \brief (TC0) Interrupt Disable Register (channel = 2) */
+#define REG_TC0_IMR2 REG_ACCESS(RoReg, 0x400100ACU) /**< \brief (TC0) Interrupt Mask Register (channel = 2) */
+#define REG_TC0_BCR REG_ACCESS(WoReg, 0x400100C0U) /**< \brief (TC0) Block Control Register */
+#define REG_TC0_BMR REG_ACCESS(RwReg, 0x400100C4U) /**< \brief (TC0) Block Mode Register */
+#define REG_TC0_QIER REG_ACCESS(WoReg, 0x400100C8U) /**< \brief (TC0) QDEC Interrupt Enable Register */
+#define REG_TC0_QIDR REG_ACCESS(WoReg, 0x400100CCU) /**< \brief (TC0) QDEC Interrupt Disable Register */
+#define REG_TC0_QIMR REG_ACCESS(RoReg, 0x400100D0U) /**< \brief (TC0) QDEC Interrupt Mask Register */
+#define REG_TC0_QISR REG_ACCESS(RoReg, 0x400100D4U) /**< \brief (TC0) QDEC Interrupt Status Register */
+#define REG_TC0_FMR REG_ACCESS(RwReg, 0x400100D8U) /**< \brief (TC0) Fault Mode Register */
+#define REG_TC0_WPMR REG_ACCESS(RwReg, 0x400100E4U) /**< \brief (TC0) Write Protect Mode Register */
+/* ========== Register definition for TC1 peripheral ========== */
+#define REG_TC1_CCR0 REG_ACCESS(WoReg, 0x40014000U) /**< \brief (TC1) Channel Control Register (channel = 0) */
+#define REG_TC1_CMR0 REG_ACCESS(RwReg, 0x40014004U) /**< \brief (TC1) Channel Mode Register (channel = 0) */
+#define REG_TC1_SMMR0 REG_ACCESS(RwReg, 0x40014008U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 0) */
+#define REG_TC1_CV0 REG_ACCESS(RoReg, 0x40014010U) /**< \brief (TC1) Counter Value (channel = 0) */
+#define REG_TC1_RA0 REG_ACCESS(RwReg, 0x40014014U) /**< \brief (TC1) Register A (channel = 0) */
+#define REG_TC1_RB0 REG_ACCESS(RwReg, 0x40014018U) /**< \brief (TC1) Register B (channel = 0) */
+#define REG_TC1_RC0 REG_ACCESS(RwReg, 0x4001401CU) /**< \brief (TC1) Register C (channel = 0) */
+#define REG_TC1_SR0 REG_ACCESS(RoReg, 0x40014020U) /**< \brief (TC1) Status Register (channel = 0) */
+#define REG_TC1_IER0 REG_ACCESS(WoReg, 0x40014024U) /**< \brief (TC1) Interrupt Enable Register (channel = 0) */
+#define REG_TC1_IDR0 REG_ACCESS(WoReg, 0x40014028U) /**< \brief (TC1) Interrupt Disable Register (channel = 0) */
+#define REG_TC1_IMR0 REG_ACCESS(RoReg, 0x4001402CU) /**< \brief (TC1) Interrupt Mask Register (channel = 0) */
+#define REG_TC1_CCR1 REG_ACCESS(WoReg, 0x40014040U) /**< \brief (TC1) Channel Control Register (channel = 1) */
+#define REG_TC1_CMR1 REG_ACCESS(RwReg, 0x40014044U) /**< \brief (TC1) Channel Mode Register (channel = 1) */
+#define REG_TC1_SMMR1 REG_ACCESS(RwReg, 0x40014048U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 1) */
+#define REG_TC1_CV1 REG_ACCESS(RoReg, 0x40014050U) /**< \brief (TC1) Counter Value (channel = 1) */
+#define REG_TC1_RA1 REG_ACCESS(RwReg, 0x40014054U) /**< \brief (TC1) Register A (channel = 1) */
+#define REG_TC1_RB1 REG_ACCESS(RwReg, 0x40014058U) /**< \brief (TC1) Register B (channel = 1) */
+#define REG_TC1_RC1 REG_ACCESS(RwReg, 0x4001405CU) /**< \brief (TC1) Register C (channel = 1) */
+#define REG_TC1_SR1 REG_ACCESS(RoReg, 0x40014060U) /**< \brief (TC1) Status Register (channel = 1) */
+#define REG_TC1_IER1 REG_ACCESS(WoReg, 0x40014064U) /**< \brief (TC1) Interrupt Enable Register (channel = 1) */
+#define REG_TC1_IDR1 REG_ACCESS(WoReg, 0x40014068U) /**< \brief (TC1) Interrupt Disable Register (channel = 1) */
+#define REG_TC1_IMR1 REG_ACCESS(RoReg, 0x4001406CU) /**< \brief (TC1) Interrupt Mask Register (channel = 1) */
+#define REG_TC1_CCR2 REG_ACCESS(WoReg, 0x40014080U) /**< \brief (TC1) Channel Control Register (channel = 2) */
+#define REG_TC1_CMR2 REG_ACCESS(RwReg, 0x40014084U) /**< \brief (TC1) Channel Mode Register (channel = 2) */
+#define REG_TC1_SMMR2 REG_ACCESS(RwReg, 0x40014088U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 2) */
+#define REG_TC1_CV2 REG_ACCESS(RoReg, 0x40014090U) /**< \brief (TC1) Counter Value (channel = 2) */
+#define REG_TC1_RA2 REG_ACCESS(RwReg, 0x40014094U) /**< \brief (TC1) Register A (channel = 2) */
+#define REG_TC1_RB2 REG_ACCESS(RwReg, 0x40014098U) /**< \brief (TC1) Register B (channel = 2) */
+#define REG_TC1_RC2 REG_ACCESS(RwReg, 0x4001409CU) /**< \brief (TC1) Register C (channel = 2) */
+#define REG_TC1_SR2 REG_ACCESS(RoReg, 0x400140A0U) /**< \brief (TC1) Status Register (channel = 2) */
+#define REG_TC1_IER2 REG_ACCESS(WoReg, 0x400140A4U) /**< \brief (TC1) Interrupt Enable Register (channel = 2) */
+#define REG_TC1_IDR2 REG_ACCESS(WoReg, 0x400140A8U) /**< \brief (TC1) Interrupt Disable Register (channel = 2) */
+#define REG_TC1_IMR2 REG_ACCESS(RoReg, 0x400140ACU) /**< \brief (TC1) Interrupt Mask Register (channel = 2) */
+#define REG_TC1_BCR REG_ACCESS(WoReg, 0x400140C0U) /**< \brief (TC1) Block Control Register */
+#define REG_TC1_BMR REG_ACCESS(RwReg, 0x400140C4U) /**< \brief (TC1) Block Mode Register */
+#define REG_TC1_QIER REG_ACCESS(WoReg, 0x400140C8U) /**< \brief (TC1) QDEC Interrupt Enable Register */
+#define REG_TC1_QIDR REG_ACCESS(WoReg, 0x400140CCU) /**< \brief (TC1) QDEC Interrupt Disable Register */
+#define REG_TC1_QIMR REG_ACCESS(RoReg, 0x400140D0U) /**< \brief (TC1) QDEC Interrupt Mask Register */
+#define REG_TC1_QISR REG_ACCESS(RoReg, 0x400140D4U) /**< \brief (TC1) QDEC Interrupt Status Register */
+#define REG_TC1_FMR REG_ACCESS(RwReg, 0x400140D8U) /**< \brief (TC1) Fault Mode Register */
+#define REG_TC1_WPMR REG_ACCESS(RwReg, 0x400140E4U) /**< \brief (TC1) Write Protect Mode Register */
+/* ========== Register definition for TWI0 peripheral ========== */
+#define REG_TWI0_CR REG_ACCESS(WoReg, 0x40018000U) /**< \brief (TWI0) Control Register */
+#define REG_TWI0_MMR REG_ACCESS(RwReg, 0x40018004U) /**< \brief (TWI0) Master Mode Register */
+#define REG_TWI0_SMR REG_ACCESS(RwReg, 0x40018008U) /**< \brief (TWI0) Slave Mode Register */
+#define REG_TWI0_IADR REG_ACCESS(RwReg, 0x4001800CU) /**< \brief (TWI0) Internal Address Register */
+#define REG_TWI0_CWGR REG_ACCESS(RwReg, 0x40018010U) /**< \brief (TWI0) Clock Waveform Generator Register */
+#define REG_TWI0_SR REG_ACCESS(RoReg, 0x40018020U) /**< \brief (TWI0) Status Register */
+#define REG_TWI0_IER REG_ACCESS(WoReg, 0x40018024U) /**< \brief (TWI0) Interrupt Enable Register */
+#define REG_TWI0_IDR REG_ACCESS(WoReg, 0x40018028U) /**< \brief (TWI0) Interrupt Disable Register */
+#define REG_TWI0_IMR REG_ACCESS(RoReg, 0x4001802CU) /**< \brief (TWI0) Interrupt Mask Register */
+#define REG_TWI0_RHR REG_ACCESS(RoReg, 0x40018030U) /**< \brief (TWI0) Receive Holding Register */
+#define REG_TWI0_THR REG_ACCESS(WoReg, 0x40018034U) /**< \brief (TWI0) Transmit Holding Register */
+#define REG_TWI0_RPR REG_ACCESS(RwReg, 0x40018100U) /**< \brief (TWI0) Receive Pointer Register */
+#define REG_TWI0_RCR REG_ACCESS(RwReg, 0x40018104U) /**< \brief (TWI0) Receive Counter Register */
+#define REG_TWI0_TPR REG_ACCESS(RwReg, 0x40018108U) /**< \brief (TWI0) Transmit Pointer Register */
+#define REG_TWI0_TCR REG_ACCESS(RwReg, 0x4001810CU) /**< \brief (TWI0) Transmit Counter Register */
+#define REG_TWI0_RNPR REG_ACCESS(RwReg, 0x40018110U) /**< \brief (TWI0) Receive Next Pointer Register */
+#define REG_TWI0_RNCR REG_ACCESS(RwReg, 0x40018114U) /**< \brief (TWI0) Receive Next Counter Register */
+#define REG_TWI0_TNPR REG_ACCESS(RwReg, 0x40018118U) /**< \brief (TWI0) Transmit Next Pointer Register */
+#define REG_TWI0_TNCR REG_ACCESS(RwReg, 0x4001811CU) /**< \brief (TWI0) Transmit Next Counter Register */
+#define REG_TWI0_PTCR REG_ACCESS(WoReg, 0x40018120U) /**< \brief (TWI0) Transfer Control Register */
+#define REG_TWI0_PTSR REG_ACCESS(RoReg, 0x40018124U) /**< \brief (TWI0) Transfer Status Register */
+/* ========== Register definition for TWI1 peripheral ========== */
+#define REG_TWI1_CR REG_ACCESS(WoReg, 0x4001C000U) /**< \brief (TWI1) Control Register */
+#define REG_TWI1_MMR REG_ACCESS(RwReg, 0x4001C004U) /**< \brief (TWI1) Master Mode Register */
+#define REG_TWI1_SMR REG_ACCESS(RwReg, 0x4001C008U) /**< \brief (TWI1) Slave Mode Register */
+#define REG_TWI1_IADR REG_ACCESS(RwReg, 0x4001C00CU) /**< \brief (TWI1) Internal Address Register */
+#define REG_TWI1_CWGR REG_ACCESS(RwReg, 0x4001C010U) /**< \brief (TWI1) Clock Waveform Generator Register */
+#define REG_TWI1_SR REG_ACCESS(RoReg, 0x4001C020U) /**< \brief (TWI1) Status Register */
+#define REG_TWI1_IER REG_ACCESS(WoReg, 0x4001C024U) /**< \brief (TWI1) Interrupt Enable Register */
+#define REG_TWI1_IDR REG_ACCESS(WoReg, 0x4001C028U) /**< \brief (TWI1) Interrupt Disable Register */
+#define REG_TWI1_IMR REG_ACCESS(RoReg, 0x4001C02CU) /**< \brief (TWI1) Interrupt Mask Register */
+#define REG_TWI1_RHR REG_ACCESS(RoReg, 0x4001C030U) /**< \brief (TWI1) Receive Holding Register */
+#define REG_TWI1_THR REG_ACCESS(WoReg, 0x4001C034U) /**< \brief (TWI1) Transmit Holding Register */
+#define REG_TWI1_RPR REG_ACCESS(RwReg, 0x4001C100U) /**< \brief (TWI1) Receive Pointer Register */
+#define REG_TWI1_RCR REG_ACCESS(RwReg, 0x4001C104U) /**< \brief (TWI1) Receive Counter Register */
+#define REG_TWI1_TPR REG_ACCESS(RwReg, 0x4001C108U) /**< \brief (TWI1) Transmit Pointer Register */
+#define REG_TWI1_TCR REG_ACCESS(RwReg, 0x4001C10CU) /**< \brief (TWI1) Transmit Counter Register */
+#define REG_TWI1_RNPR REG_ACCESS(RwReg, 0x4001C110U) /**< \brief (TWI1) Receive Next Pointer Register */
+#define REG_TWI1_RNCR REG_ACCESS(RwReg, 0x4001C114U) /**< \brief (TWI1) Receive Next Counter Register */
+#define REG_TWI1_TNPR REG_ACCESS(RwReg, 0x4001C118U) /**< \brief (TWI1) Transmit Next Pointer Register */
+#define REG_TWI1_TNCR REG_ACCESS(RwReg, 0x4001C11CU) /**< \brief (TWI1) Transmit Next Counter Register */
+#define REG_TWI1_PTCR REG_ACCESS(WoReg, 0x4001C120U) /**< \brief (TWI1) Transfer Control Register */
+#define REG_TWI1_PTSR REG_ACCESS(RoReg, 0x4001C124U) /**< \brief (TWI1) Transfer Status Register */
+/* ========== Register definition for PWM peripheral ========== */
+#define REG_PWM_CLK REG_ACCESS(RwReg, 0x40020000U) /**< \brief (PWM) PWM Clock Register */
+#define REG_PWM_ENA REG_ACCESS(WoReg, 0x40020004U) /**< \brief (PWM) PWM Enable Register */
+#define REG_PWM_DIS REG_ACCESS(WoReg, 0x40020008U) /**< \brief (PWM) PWM Disable Register */
+#define REG_PWM_SR REG_ACCESS(RoReg, 0x4002000CU) /**< \brief (PWM) PWM Status Register */
+#define REG_PWM_IER1 REG_ACCESS(WoReg, 0x40020010U) /**< \brief (PWM) PWM Interrupt Enable Register 1 */
+#define REG_PWM_IDR1 REG_ACCESS(WoReg, 0x40020014U) /**< \brief (PWM) PWM Interrupt Disable Register 1 */
+#define REG_PWM_IMR1 REG_ACCESS(RoReg, 0x40020018U) /**< \brief (PWM) PWM Interrupt Mask Register 1 */
+#define REG_PWM_ISR1 REG_ACCESS(RoReg, 0x4002001CU) /**< \brief (PWM) PWM Interrupt Status Register 1 */
+#define REG_PWM_SCM REG_ACCESS(RwReg, 0x40020020U) /**< \brief (PWM) PWM Sync Channels Mode Register */
+#define REG_PWM_SCUC REG_ACCESS(RwReg, 0x40020028U) /**< \brief (PWM) PWM Sync Channels Update Control Register */
+#define REG_PWM_SCUP REG_ACCESS(RwReg, 0x4002002CU) /**< \brief (PWM) PWM Sync Channels Update Period Register */
+#define REG_PWM_SCUPUPD REG_ACCESS(WoReg, 0x40020030U) /**< \brief (PWM) PWM Sync Channels Update Period Update Register */
+#define REG_PWM_IER2 REG_ACCESS(WoReg, 0x40020034U) /**< \brief (PWM) PWM Interrupt Enable Register 2 */
+#define REG_PWM_IDR2 REG_ACCESS(WoReg, 0x40020038U) /**< \brief (PWM) PWM Interrupt Disable Register 2 */
+#define REG_PWM_IMR2 REG_ACCESS(RoReg, 0x4002003CU) /**< \brief (PWM) PWM Interrupt Mask Register 2 */
+#define REG_PWM_ISR2 REG_ACCESS(RoReg, 0x40020040U) /**< \brief (PWM) PWM Interrupt Status Register 2 */
+#define REG_PWM_OOV REG_ACCESS(RwReg, 0x40020044U) /**< \brief (PWM) PWM Output Override Value Register */
+#define REG_PWM_OS REG_ACCESS(RwReg, 0x40020048U) /**< \brief (PWM) PWM Output Selection Register */
+#define REG_PWM_OSS REG_ACCESS(WoReg, 0x4002004CU) /**< \brief (PWM) PWM Output Selection Set Register */
+#define REG_PWM_OSC REG_ACCESS(WoReg, 0x40020050U) /**< \brief (PWM) PWM Output Selection Clear Register */
+#define REG_PWM_OSSUPD REG_ACCESS(WoReg, 0x40020054U) /**< \brief (PWM) PWM Output Selection Set Update Register */
+#define REG_PWM_OSCUPD REG_ACCESS(WoReg, 0x40020058U) /**< \brief (PWM) PWM Output Selection Clear Update Register */
+#define REG_PWM_FMR REG_ACCESS(RwReg, 0x4002005CU) /**< \brief (PWM) PWM Fault Mode Register */
+#define REG_PWM_FSR REG_ACCESS(RoReg, 0x40020060U) /**< \brief (PWM) PWM Fault Status Register */
+#define REG_PWM_FCR REG_ACCESS(WoReg, 0x40020064U) /**< \brief (PWM) PWM Fault Clear Register */
+#define REG_PWM_FPV REG_ACCESS(RwReg, 0x40020068U) /**< \brief (PWM) PWM Fault Protection Value Register */
+#define REG_PWM_FPE REG_ACCESS(RwReg, 0x4002006CU) /**< \brief (PWM) PWM Fault Protection Enable Register */
+#define REG_PWM_EL0MR REG_ACCESS(RwReg, 0x4002007CU) /**< \brief (PWM) PWM Event Line 0 Mode Register */
+#define REG_PWM_EL1MR REG_ACCESS(RwReg, 0x40020080U) /**< \brief (PWM) PWM Event Line 1 Mode Register */
+#define REG_PWM_SMMR REG_ACCESS(RwReg, 0x400200B0U) /**< \brief (PWM) PWM Stepper Motor Mode Register */
+#define REG_PWM_WPCR REG_ACCESS(WoReg, 0x400200E4U) /**< \brief (PWM) PWM Write Protect Control Register */
+#define REG_PWM_WPSR REG_ACCESS(RoReg, 0x400200E8U) /**< \brief (PWM) PWM Write Protect Status Register */
+#define REG_PWM_RPR REG_ACCESS(RwReg, 0x40020100U) /**< \brief (PWM) Receive Pointer Register */
+#define REG_PWM_RCR REG_ACCESS(RwReg, 0x40020104U) /**< \brief (PWM) Receive Counter Register */
+#define REG_PWM_TPR REG_ACCESS(RwReg, 0x40020108U) /**< \brief (PWM) Transmit Pointer Register */
+#define REG_PWM_TCR REG_ACCESS(RwReg, 0x4002010CU) /**< \brief (PWM) Transmit Counter Register */
+#define REG_PWM_RNPR REG_ACCESS(RwReg, 0x40020110U) /**< \brief (PWM) Receive Next Pointer Register */
+#define REG_PWM_RNCR REG_ACCESS(RwReg, 0x40020114U) /**< \brief (PWM) Receive Next Counter Register */
+#define REG_PWM_TNPR REG_ACCESS(RwReg, 0x40020118U) /**< \brief (PWM) Transmit Next Pointer Register */
+#define REG_PWM_TNCR REG_ACCESS(RwReg, 0x4002011CU) /**< \brief (PWM) Transmit Next Counter Register */
+#define REG_PWM_PTCR REG_ACCESS(WoReg, 0x40020120U) /**< \brief (PWM) Transfer Control Register */
+#define REG_PWM_PTSR REG_ACCESS(RoReg, 0x40020124U) /**< \brief (PWM) Transfer Status Register */
+#define REG_PWM_CMP0V REG_ACCESS(RwReg, 0x40020130U) /**< \brief (PWM) PWM Comparison 0 Value Register */
+#define REG_PWM_CMP0VUPD REG_ACCESS(WoReg, 0x40020134U) /**< \brief (PWM) PWM Comparison 0 Value Update Register */
+#define REG_PWM_CMP0M REG_ACCESS(RwReg, 0x40020138U) /**< \brief (PWM) PWM Comparison 0 Mode Register */
+#define REG_PWM_CMP0MUPD REG_ACCESS(WoReg, 0x4002013CU) /**< \brief (PWM) PWM Comparison 0 Mode Update Register */
+#define REG_PWM_CMP1V REG_ACCESS(RwReg, 0x40020140U) /**< \brief (PWM) PWM Comparison 1 Value Register */
+#define REG_PWM_CMP1VUPD REG_ACCESS(WoReg, 0x40020144U) /**< \brief (PWM) PWM Comparison 1 Value Update Register */
+#define REG_PWM_CMP1M REG_ACCESS(RwReg, 0x40020148U) /**< \brief (PWM) PWM Comparison 1 Mode Register */
+#define REG_PWM_CMP1MUPD REG_ACCESS(WoReg, 0x4002014CU) /**< \brief (PWM) PWM Comparison 1 Mode Update Register */
+#define REG_PWM_CMP2V REG_ACCESS(RwReg, 0x40020150U) /**< \brief (PWM) PWM Comparison 2 Value Register */
+#define REG_PWM_CMP2VUPD REG_ACCESS(WoReg, 0x40020154U) /**< \brief (PWM) PWM Comparison 2 Value Update Register */
+#define REG_PWM_CMP2M REG_ACCESS(RwReg, 0x40020158U) /**< \brief (PWM) PWM Comparison 2 Mode Register */
+#define REG_PWM_CMP2MUPD REG_ACCESS(WoReg, 0x4002015CU) /**< \brief (PWM) PWM Comparison 2 Mode Update Register */
+#define REG_PWM_CMP3V REG_ACCESS(RwReg, 0x40020160U) /**< \brief (PWM) PWM Comparison 3 Value Register */
+#define REG_PWM_CMP3VUPD REG_ACCESS(WoReg, 0x40020164U) /**< \brief (PWM) PWM Comparison 3 Value Update Register */
+#define REG_PWM_CMP3M REG_ACCESS(RwReg, 0x40020168U) /**< \brief (PWM) PWM Comparison 3 Mode Register */
+#define REG_PWM_CMP3MUPD REG_ACCESS(WoReg, 0x4002016CU) /**< \brief (PWM) PWM Comparison 3 Mode Update Register */
+#define REG_PWM_CMP4V REG_ACCESS(RwReg, 0x40020170U) /**< \brief (PWM) PWM Comparison 4 Value Register */
+#define REG_PWM_CMP4VUPD REG_ACCESS(WoReg, 0x40020174U) /**< \brief (PWM) PWM Comparison 4 Value Update Register */
+#define REG_PWM_CMP4M REG_ACCESS(RwReg, 0x40020178U) /**< \brief (PWM) PWM Comparison 4 Mode Register */
+#define REG_PWM_CMP4MUPD REG_ACCESS(WoReg, 0x4002017CU) /**< \brief (PWM) PWM Comparison 4 Mode Update Register */
+#define REG_PWM_CMP5V REG_ACCESS(RwReg, 0x40020180U) /**< \brief (PWM) PWM Comparison 5 Value Register */
+#define REG_PWM_CMP5VUPD REG_ACCESS(WoReg, 0x40020184U) /**< \brief (PWM) PWM Comparison 5 Value Update Register */
+#define REG_PWM_CMP5M REG_ACCESS(RwReg, 0x40020188U) /**< \brief (PWM) PWM Comparison 5 Mode Register */
+#define REG_PWM_CMP5MUPD REG_ACCESS(WoReg, 0x4002018CU) /**< \brief (PWM) PWM Comparison 5 Mode Update Register */
+#define REG_PWM_CMP6V REG_ACCESS(RwReg, 0x40020190U) /**< \brief (PWM) PWM Comparison 6 Value Register */
+#define REG_PWM_CMP6VUPD REG_ACCESS(WoReg, 0x40020194U) /**< \brief (PWM) PWM Comparison 6 Value Update Register */
+#define REG_PWM_CMP6M REG_ACCESS(RwReg, 0x40020198U) /**< \brief (PWM) PWM Comparison 6 Mode Register */
+#define REG_PWM_CMP6MUPD REG_ACCESS(WoReg, 0x4002019CU) /**< \brief (PWM) PWM Comparison 6 Mode Update Register */
+#define REG_PWM_CMP7V REG_ACCESS(RwReg, 0x400201A0U) /**< \brief (PWM) PWM Comparison 7 Value Register */
+#define REG_PWM_CMP7VUPD REG_ACCESS(WoReg, 0x400201A4U) /**< \brief (PWM) PWM Comparison 7 Value Update Register */
+#define REG_PWM_CMP7M REG_ACCESS(RwReg, 0x400201A8U) /**< \brief (PWM) PWM Comparison 7 Mode Register */
+#define REG_PWM_CMP7MUPD REG_ACCESS(WoReg, 0x400201ACU) /**< \brief (PWM) PWM Comparison 7 Mode Update Register */
+#define REG_PWM_CMR0 REG_ACCESS(RwReg, 0x40020200U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 0) */
+#define REG_PWM_CDTY0 REG_ACCESS(RwReg, 0x40020204U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 0) */
+#define REG_PWM_CDTYUPD0 REG_ACCESS(WoReg, 0x40020208U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 0) */
+#define REG_PWM_CPRD0 REG_ACCESS(RwReg, 0x4002020CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 0) */
+#define REG_PWM_CPRDUPD0 REG_ACCESS(WoReg, 0x40020210U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 0) */
+#define REG_PWM_CCNT0 REG_ACCESS(RoReg, 0x40020214U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 0) */
+#define REG_PWM_DT0 REG_ACCESS(RwReg, 0x40020218U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 0) */
+#define REG_PWM_DTUPD0 REG_ACCESS(WoReg, 0x4002021CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 0) */
+#define REG_PWM_CMR1 REG_ACCESS(RwReg, 0x40020220U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 1) */
+#define REG_PWM_CDTY1 REG_ACCESS(RwReg, 0x40020224U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 1) */
+#define REG_PWM_CDTYUPD1 REG_ACCESS(WoReg, 0x40020228U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 1) */
+#define REG_PWM_CPRD1 REG_ACCESS(RwReg, 0x4002022CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 1) */
+#define REG_PWM_CPRDUPD1 REG_ACCESS(WoReg, 0x40020230U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 1) */
+#define REG_PWM_CCNT1 REG_ACCESS(RoReg, 0x40020234U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 1) */
+#define REG_PWM_DT1 REG_ACCESS(RwReg, 0x40020238U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 1) */
+#define REG_PWM_DTUPD1 REG_ACCESS(WoReg, 0x4002023CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 1) */
+#define REG_PWM_CMR2 REG_ACCESS(RwReg, 0x40020240U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 2) */
+#define REG_PWM_CDTY2 REG_ACCESS(RwReg, 0x40020244U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 2) */
+#define REG_PWM_CDTYUPD2 REG_ACCESS(WoReg, 0x40020248U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 2) */
+#define REG_PWM_CPRD2 REG_ACCESS(RwReg, 0x4002024CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 2) */
+#define REG_PWM_CPRDUPD2 REG_ACCESS(WoReg, 0x40020250U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 2) */
+#define REG_PWM_CCNT2 REG_ACCESS(RoReg, 0x40020254U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 2) */
+#define REG_PWM_DT2 REG_ACCESS(RwReg, 0x40020258U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 2) */
+#define REG_PWM_DTUPD2 REG_ACCESS(WoReg, 0x4002025CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 2) */
+#define REG_PWM_CMR3 REG_ACCESS(RwReg, 0x40020260U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 3) */
+#define REG_PWM_CDTY3 REG_ACCESS(RwReg, 0x40020264U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 3) */
+#define REG_PWM_CDTYUPD3 REG_ACCESS(WoReg, 0x40020268U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 3) */
+#define REG_PWM_CPRD3 REG_ACCESS(RwReg, 0x4002026CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 3) */
+#define REG_PWM_CPRDUPD3 REG_ACCESS(WoReg, 0x40020270U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 3) */
+#define REG_PWM_CCNT3 REG_ACCESS(RoReg, 0x40020274U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 3) */
+#define REG_PWM_DT3 REG_ACCESS(RwReg, 0x40020278U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 3) */
+#define REG_PWM_DTUPD3 REG_ACCESS(WoReg, 0x4002027CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 3) */
+/* ========== Register definition for USART0 peripheral ========== */
+#define REG_USART0_CR REG_ACCESS(WoReg, 0x40024000U) /**< \brief (USART0) Control Register */
+#define REG_USART0_MR REG_ACCESS(RwReg, 0x40024004U) /**< \brief (USART0) Mode Register */
+#define REG_USART0_IER REG_ACCESS(WoReg, 0x40024008U) /**< \brief (USART0) Interrupt Enable Register */
+#define REG_USART0_IDR REG_ACCESS(WoReg, 0x4002400CU) /**< \brief (USART0) Interrupt Disable Register */
+#define REG_USART0_IMR REG_ACCESS(RoReg, 0x40024010U) /**< \brief (USART0) Interrupt Mask Register */
+#define REG_USART0_CSR REG_ACCESS(RoReg, 0x40024014U) /**< \brief (USART0) Channel Status Register */
+#define REG_USART0_RHR REG_ACCESS(RoReg, 0x40024018U) /**< \brief (USART0) Receiver Holding Register */
+#define REG_USART0_THR REG_ACCESS(WoReg, 0x4002401CU) /**< \brief (USART0) Transmitter Holding Register */
+#define REG_USART0_BRGR REG_ACCESS(RwReg, 0x40024020U) /**< \brief (USART0) Baud Rate Generator Register */
+#define REG_USART0_RTOR REG_ACCESS(RwReg, 0x40024024U) /**< \brief (USART0) Receiver Time-out Register */
+#define REG_USART0_TTGR REG_ACCESS(RwReg, 0x40024028U) /**< \brief (USART0) Transmitter Timeguard Register */
+#define REG_USART0_FIDI REG_ACCESS(RwReg, 0x40024040U) /**< \brief (USART0) FI DI Ratio Register */
+#define REG_USART0_NER REG_ACCESS(RoReg, 0x40024044U) /**< \brief (USART0) Number of Errors Register */
+#define REG_USART0_IF REG_ACCESS(RwReg, 0x4002404CU) /**< \brief (USART0) IrDA Filter Register */
+#define REG_USART0_MAN REG_ACCESS(RwReg, 0x40024050U) /**< \brief (USART0) Manchester Encoder Decoder Register */
+#define REG_USART0_WPMR REG_ACCESS(RwReg, 0x400240E4U) /**< \brief (USART0) Write Protect Mode Register */
+#define REG_USART0_WPSR REG_ACCESS(RoReg, 0x400240E8U) /**< \brief (USART0) Write Protect Status Register */
+#define REG_USART0_RPR REG_ACCESS(RwReg, 0x40024100U) /**< \brief (USART0) Receive Pointer Register */
+#define REG_USART0_RCR REG_ACCESS(RwReg, 0x40024104U) /**< \brief (USART0) Receive Counter Register */
+#define REG_USART0_TPR REG_ACCESS(RwReg, 0x40024108U) /**< \brief (USART0) Transmit Pointer Register */
+#define REG_USART0_TCR REG_ACCESS(RwReg, 0x4002410CU) /**< \brief (USART0) Transmit Counter Register */
+#define REG_USART0_RNPR REG_ACCESS(RwReg, 0x40024110U) /**< \brief (USART0) Receive Next Pointer Register */
+#define REG_USART0_RNCR REG_ACCESS(RwReg, 0x40024114U) /**< \brief (USART0) Receive Next Counter Register */
+#define REG_USART0_TNPR REG_ACCESS(RwReg, 0x40024118U) /**< \brief (USART0) Transmit Next Pointer Register */
+#define REG_USART0_TNCR REG_ACCESS(RwReg, 0x4002411CU) /**< \brief (USART0) Transmit Next Counter Register */
+#define REG_USART0_PTCR REG_ACCESS(WoReg, 0x40024120U) /**< \brief (USART0) Transfer Control Register */
+#define REG_USART0_PTSR REG_ACCESS(RoReg, 0x40024124U) /**< \brief (USART0) Transfer Status Register */
+/* ========== Register definition for USART1 peripheral ========== */
+#define REG_USART1_CR REG_ACCESS(WoReg, 0x40028000U) /**< \brief (USART1) Control Register */
+#define REG_USART1_MR REG_ACCESS(RwReg, 0x40028004U) /**< \brief (USART1) Mode Register */
+#define REG_USART1_IER REG_ACCESS(WoReg, 0x40028008U) /**< \brief (USART1) Interrupt Enable Register */
+#define REG_USART1_IDR REG_ACCESS(WoReg, 0x4002800CU) /**< \brief (USART1) Interrupt Disable Register */
+#define REG_USART1_IMR REG_ACCESS(RoReg, 0x40028010U) /**< \brief (USART1) Interrupt Mask Register */
+#define REG_USART1_CSR REG_ACCESS(RoReg, 0x40028014U) /**< \brief (USART1) Channel Status Register */
+#define REG_USART1_RHR REG_ACCESS(RoReg, 0x40028018U) /**< \brief (USART1) Receiver Holding Register */
+#define REG_USART1_THR REG_ACCESS(WoReg, 0x4002801CU) /**< \brief (USART1) Transmitter Holding Register */
+#define REG_USART1_BRGR REG_ACCESS(RwReg, 0x40028020U) /**< \brief (USART1) Baud Rate Generator Register */
+#define REG_USART1_RTOR REG_ACCESS(RwReg, 0x40028024U) /**< \brief (USART1) Receiver Time-out Register */
+#define REG_USART1_TTGR REG_ACCESS(RwReg, 0x40028028U) /**< \brief (USART1) Transmitter Timeguard Register */
+#define REG_USART1_FIDI REG_ACCESS(RwReg, 0x40028040U) /**< \brief (USART1) FI DI Ratio Register */
+#define REG_USART1_NER REG_ACCESS(RoReg, 0x40028044U) /**< \brief (USART1) Number of Errors Register */
+#define REG_USART1_IF REG_ACCESS(RwReg, 0x4002804CU) /**< \brief (USART1) IrDA Filter Register */
+#define REG_USART1_MAN REG_ACCESS(RwReg, 0x40028050U) /**< \brief (USART1) Manchester Encoder Decoder Register */
+#define REG_USART1_WPMR REG_ACCESS(RwReg, 0x400280E4U) /**< \brief (USART1) Write Protect Mode Register */
+#define REG_USART1_WPSR REG_ACCESS(RoReg, 0x400280E8U) /**< \brief (USART1) Write Protect Status Register */
+#define REG_USART1_RPR REG_ACCESS(RwReg, 0x40028100U) /**< \brief (USART1) Receive Pointer Register */
+#define REG_USART1_RCR REG_ACCESS(RwReg, 0x40028104U) /**< \brief (USART1) Receive Counter Register */
+#define REG_USART1_TPR REG_ACCESS(RwReg, 0x40028108U) /**< \brief (USART1) Transmit Pointer Register */
+#define REG_USART1_TCR REG_ACCESS(RwReg, 0x4002810CU) /**< \brief (USART1) Transmit Counter Register */
+#define REG_USART1_RNPR REG_ACCESS(RwReg, 0x40028110U) /**< \brief (USART1) Receive Next Pointer Register */
+#define REG_USART1_RNCR REG_ACCESS(RwReg, 0x40028114U) /**< \brief (USART1) Receive Next Counter Register */
+#define REG_USART1_TNPR REG_ACCESS(RwReg, 0x40028118U) /**< \brief (USART1) Transmit Next Pointer Register */
+#define REG_USART1_TNCR REG_ACCESS(RwReg, 0x4002811CU) /**< \brief (USART1) Transmit Next Counter Register */
+#define REG_USART1_PTCR REG_ACCESS(WoReg, 0x40028120U) /**< \brief (USART1) Transfer Control Register */
+#define REG_USART1_PTSR REG_ACCESS(RoReg, 0x40028124U) /**< \brief (USART1) Transfer Status Register */
+/* ========== Register definition for UDP peripheral ========== */
+#define REG_UDP_FRM_NUM REG_ACCESS(RoReg, 0x40034000U) /**< \brief (UDP) Frame Number Register */
+#define REG_UDP_GLB_STAT REG_ACCESS(RwReg, 0x40034004U) /**< \brief (UDP) Global State Register */
+#define REG_UDP_FADDR REG_ACCESS(RwReg, 0x40034008U) /**< \brief (UDP) Function Address Register */
+#define REG_UDP_IER REG_ACCESS(WoReg, 0x40034010U) /**< \brief (UDP) Interrupt Enable Register */
+#define REG_UDP_IDR REG_ACCESS(WoReg, 0x40034014U) /**< \brief (UDP) Interrupt Disable Register */
+#define REG_UDP_IMR REG_ACCESS(RoReg, 0x40034018U) /**< \brief (UDP) Interrupt Mask Register */
+#define REG_UDP_ISR REG_ACCESS(RoReg, 0x4003401CU) /**< \brief (UDP) Interrupt Status Register */
+#define REG_UDP_ICR REG_ACCESS(WoReg, 0x40034020U) /**< \brief (UDP) Interrupt Clear Register */
+#define REG_UDP_RST_EP REG_ACCESS(RwReg, 0x40034028U) /**< \brief (UDP) Reset Endpoint Register */
+#define REG_UDP_CSR REG_ACCESS(RwReg, 0x40034030U) /**< \brief (UDP) Endpoint Control and Status Register */
+#define REG_UDP_FDR REG_ACCESS(RwReg, 0x40034050U) /**< \brief (UDP) Endpoint FIFO Data Register */
+#define REG_UDP_TXVC REG_ACCESS(RwReg, 0x40034074U) /**< \brief (UDP) Transceiver Control Register */
+/* ========== Register definition for ADC peripheral ========== */
+#define REG_ADC_CR REG_ACCESS(WoReg, 0x40038000U) /**< \brief (ADC) Control Register */
+#define REG_ADC_MR REG_ACCESS(RwReg, 0x40038004U) /**< \brief (ADC) Mode Register */
+#define REG_ADC_SEQR1 REG_ACCESS(RwReg, 0x40038008U) /**< \brief (ADC) Channel Sequence Register 1 */
+#define REG_ADC_SEQR2 REG_ACCESS(RwReg, 0x4003800CU) /**< \brief (ADC) Channel Sequence Register 2 */
+#define REG_ADC_CHER REG_ACCESS(WoReg, 0x40038010U) /**< \brief (ADC) Channel Enable Register */
+#define REG_ADC_CHDR REG_ACCESS(WoReg, 0x40038014U) /**< \brief (ADC) Channel Disable Register */
+#define REG_ADC_CHSR REG_ACCESS(RoReg, 0x40038018U) /**< \brief (ADC) Channel Status Register */
+#define REG_ADC_LCDR REG_ACCESS(RoReg, 0x40038020U) /**< \brief (ADC) Last Converted Data Register */
+#define REG_ADC_IER REG_ACCESS(WoReg, 0x40038024U) /**< \brief (ADC) Interrupt Enable Register */
+#define REG_ADC_IDR REG_ACCESS(WoReg, 0x40038028U) /**< \brief (ADC) Interrupt Disable Register */
+#define REG_ADC_IMR REG_ACCESS(RoReg, 0x4003802CU) /**< \brief (ADC) Interrupt Mask Register */
+#define REG_ADC_ISR REG_ACCESS(RoReg, 0x40038030U) /**< \brief (ADC) Interrupt Status Register */
+#define REG_ADC_OVER REG_ACCESS(RoReg, 0x4003803CU) /**< \brief (ADC) Overrun Status Register */
+#define REG_ADC_EMR REG_ACCESS(RwReg, 0x40038040U) /**< \brief (ADC) Extended Mode Register */
+#define REG_ADC_CWR REG_ACCESS(RwReg, 0x40038044U) /**< \brief (ADC) Compare Window Register */
+#define REG_ADC_CGR REG_ACCESS(RwReg, 0x40038048U) /**< \brief (ADC) Channel Gain Register */
+#define REG_ADC_COR REG_ACCESS(RwReg, 0x4003804CU) /**< \brief (ADC) Channel Offset Register */
+#define REG_ADC_CDR REG_ACCESS(RoReg, 0x40038050U) /**< \brief (ADC) Channel Data Register */
+#define REG_ADC_ACR REG_ACCESS(RwReg, 0x40038094U) /**< \brief (ADC) Analog Control Register */
+#define REG_ADC_WPMR REG_ACCESS(RwReg, 0x400380E4U) /**< \brief (ADC) Write Protect Mode Register */
+#define REG_ADC_WPSR REG_ACCESS(RoReg, 0x400380E8U) /**< \brief (ADC) Write Protect Status Register */
+#define REG_ADC_RPR REG_ACCESS(RwReg, 0x40038100U) /**< \brief (ADC) Receive Pointer Register */
+#define REG_ADC_RCR REG_ACCESS(RwReg, 0x40038104U) /**< \brief (ADC) Receive Counter Register */
+#define REG_ADC_TPR REG_ACCESS(RwReg, 0x40038108U) /**< \brief (ADC) Transmit Pointer Register */
+#define REG_ADC_TCR REG_ACCESS(RwReg, 0x4003810CU) /**< \brief (ADC) Transmit Counter Register */
+#define REG_ADC_RNPR REG_ACCESS(RwReg, 0x40038110U) /**< \brief (ADC) Receive Next Pointer Register */
+#define REG_ADC_RNCR REG_ACCESS(RwReg, 0x40038114U) /**< \brief (ADC) Receive Next Counter Register */
+#define REG_ADC_TNPR REG_ACCESS(RwReg, 0x40038118U) /**< \brief (ADC) Transmit Next Pointer Register */
+#define REG_ADC_TNCR REG_ACCESS(RwReg, 0x4003811CU) /**< \brief (ADC) Transmit Next Counter Register */
+#define REG_ADC_PTCR REG_ACCESS(WoReg, 0x40038120U) /**< \brief (ADC) Transfer Control Register */
+#define REG_ADC_PTSR REG_ACCESS(RoReg, 0x40038124U) /**< \brief (ADC) Transfer Status Register */
+/* ========== Register definition for DACC peripheral ========== */
+#define REG_DACC_CR REG_ACCESS(WoReg, 0x4003C000U) /**< \brief (DACC) Control Register */
+#define REG_DACC_MR REG_ACCESS(RwReg, 0x4003C004U) /**< \brief (DACC) Mode Register */
+#define REG_DACC_CHER REG_ACCESS(WoReg, 0x4003C010U) /**< \brief (DACC) Channel Enable Register */
+#define REG_DACC_CHDR REG_ACCESS(WoReg, 0x4003C014U) /**< \brief (DACC) Channel Disable Register */
+#define REG_DACC_CHSR REG_ACCESS(RoReg, 0x4003C018U) /**< \brief (DACC) Channel Status Register */
+#define REG_DACC_CDR REG_ACCESS(WoReg, 0x4003C020U) /**< \brief (DACC) Conversion Data Register */
+#define REG_DACC_IER REG_ACCESS(WoReg, 0x4003C024U) /**< \brief (DACC) Interrupt Enable Register */
+#define REG_DACC_IDR REG_ACCESS(WoReg, 0x4003C028U) /**< \brief (DACC) Interrupt Disable Register */
+#define REG_DACC_IMR REG_ACCESS(RoReg, 0x4003C02CU) /**< \brief (DACC) Interrupt Mask Register */
+#define REG_DACC_ISR REG_ACCESS(RoReg, 0x4003C030U) /**< \brief (DACC) Interrupt Status Register */
+#define REG_DACC_ACR REG_ACCESS(RwReg, 0x4003C094U) /**< \brief (DACC) Analog Current Register */
+#define REG_DACC_WPMR REG_ACCESS(RwReg, 0x4003C0E4U) /**< \brief (DACC) Write Protect Mode register */
+#define REG_DACC_WPSR REG_ACCESS(RoReg, 0x4003C0E8U) /**< \brief (DACC) Write Protect Status register */
+#define REG_DACC_RPR REG_ACCESS(RwReg, 0x4003C100U) /**< \brief (DACC) Receive Pointer Register */
+#define REG_DACC_RCR REG_ACCESS(RwReg, 0x4003C104U) /**< \brief (DACC) Receive Counter Register */
+#define REG_DACC_TPR REG_ACCESS(RwReg, 0x4003C108U) /**< \brief (DACC) Transmit Pointer Register */
+#define REG_DACC_TCR REG_ACCESS(RwReg, 0x4003C10CU) /**< \brief (DACC) Transmit Counter Register */
+#define REG_DACC_RNPR REG_ACCESS(RwReg, 0x4003C110U) /**< \brief (DACC) Receive Next Pointer Register */
+#define REG_DACC_RNCR REG_ACCESS(RwReg, 0x4003C114U) /**< \brief (DACC) Receive Next Counter Register */
+#define REG_DACC_TNPR REG_ACCESS(RwReg, 0x4003C118U) /**< \brief (DACC) Transmit Next Pointer Register */
+#define REG_DACC_TNCR REG_ACCESS(RwReg, 0x4003C11CU) /**< \brief (DACC) Transmit Next Counter Register */
+#define REG_DACC_PTCR REG_ACCESS(WoReg, 0x4003C120U) /**< \brief (DACC) Transfer Control Register */
+#define REG_DACC_PTSR REG_ACCESS(RoReg, 0x4003C124U) /**< \brief (DACC) Transfer Status Register */
+/* ========== Register definition for ACC peripheral ========== */
+#define REG_ACC_CR REG_ACCESS(WoReg, 0x40040000U) /**< \brief (ACC) Control Register */
+#define REG_ACC_MR REG_ACCESS(RwReg, 0x40040004U) /**< \brief (ACC) Mode Register */
+#define REG_ACC_IER REG_ACCESS(WoReg, 0x40040024U) /**< \brief (ACC) Interrupt Enable Register */
+#define REG_ACC_IDR REG_ACCESS(WoReg, 0x40040028U) /**< \brief (ACC) Interrupt Disable Register */
+#define REG_ACC_IMR REG_ACCESS(RoReg, 0x4004002CU) /**< \brief (ACC) Interrupt Mask Register */
+#define REG_ACC_ISR REG_ACCESS(RoReg, 0x40040030U) /**< \brief (ACC) Interrupt Status Register */
+#define REG_ACC_ACR REG_ACCESS(RwReg, 0x40040094U) /**< \brief (ACC) Analog Control Register */
+#define REG_ACC_WPMR REG_ACCESS(RwReg, 0x400400E4U) /**< \brief (ACC) Write Protect Mode Register */
+#define REG_ACC_WPSR REG_ACCESS(RoReg, 0x400400E8U) /**< \brief (ACC) Write Protect Status Register */
+/* ========== Register definition for CRCCU peripheral ========== */
+#define REG_CRCCU_DSCR REG_ACCESS(RwReg, 0x40044000U) /**< \brief (CRCCU) CRCCU Descriptor Base Register */
+#define REG_CRCCU_DMA_EN REG_ACCESS(WoReg, 0x40044008U) /**< \brief (CRCCU) CRCCU DMA Enable Register */
+#define REG_CRCCU_DMA_DIS REG_ACCESS(WoReg, 0x4004400CU) /**< \brief (CRCCU) CRCCU DMA Disable Register */
+#define REG_CRCCU_DMA_SR REG_ACCESS(RoReg, 0x40044010U) /**< \brief (CRCCU) CRCCU DMA Status Register */
+#define REG_CRCCU_DMA_IER REG_ACCESS(WoReg, 0x40044014U) /**< \brief (CRCCU) CRCCU DMA Interrupt Enable Register */
+#define REG_CRCCU_DMA_IDR REG_ACCESS(WoReg, 0x40044018U) /**< \brief (CRCCU) CRCCU DMA Interrupt Disable Register */
+#define REG_CRCCU_DMA_IMR REG_ACCESS(RoReg, 0x4004401CU) /**< \brief (CRCCU) CRCCU DMA Interrupt Mask Register */
+#define REG_CRCCU_DMA_ISR REG_ACCESS(RoReg, 0x40044020U) /**< \brief (CRCCU) CRCCU DMA Interrupt Status Register */
+#define REG_CRCCU_CR REG_ACCESS(WoReg, 0x40044034U) /**< \brief (CRCCU) CRCCU Control Register */
+#define REG_CRCCU_MR REG_ACCESS(RwReg, 0x40044038U) /**< \brief (CRCCU) CRCCU Mode Register */
+#define REG_CRCCU_SR REG_ACCESS(RoReg, 0x4004403CU) /**< \brief (CRCCU) CRCCU Status Register */
+#define REG_CRCCU_IER REG_ACCESS(WoReg, 0x40044040U) /**< \brief (CRCCU) CRCCU Interrupt Enable Register */
+#define REG_CRCCU_IDR REG_ACCESS(WoReg, 0x40044044U) /**< \brief (CRCCU) CRCCU Interrupt Disable Register */
+#define REG_CRCCU_IMR REG_ACCESS(RoReg, 0x40044048U) /**< \brief (CRCCU) CRCCU Interrupt Mask Register */
+#define REG_CRCCU_ISR REG_ACCESS(RoReg, 0x4004404CU) /**< \brief (CRCCU) CRCCU Interrupt Status Register */
+/* ========== Register definition for SMC peripheral ========== */
+#define REG_SMC_SETUP0 REG_ACCESS(RwReg, 0x400E0000U) /**< \brief (SMC) SMC Setup Register (CS_number = 0) */
+#define REG_SMC_PULSE0 REG_ACCESS(RwReg, 0x400E0004U) /**< \brief (SMC) SMC Pulse Register (CS_number = 0) */
+#define REG_SMC_CYCLE0 REG_ACCESS(RwReg, 0x400E0008U) /**< \brief (SMC) SMC Cycle Register (CS_number = 0) */
+#define REG_SMC_MODE0 REG_ACCESS(RwReg, 0x400E000CU) /**< \brief (SMC) SMC Mode Register (CS_number = 0) */
+#define REG_SMC_SETUP1 REG_ACCESS(RwReg, 0x400E0010U) /**< \brief (SMC) SMC Setup Register (CS_number = 1) */
+#define REG_SMC_PULSE1 REG_ACCESS(RwReg, 0x400E0014U) /**< \brief (SMC) SMC Pulse Register (CS_number = 1) */
+#define REG_SMC_CYCLE1 REG_ACCESS(RwReg, 0x400E0018U) /**< \brief (SMC) SMC Cycle Register (CS_number = 1) */
+#define REG_SMC_MODE1 REG_ACCESS(RwReg, 0x400E001CU) /**< \brief (SMC) SMC Mode Register (CS_number = 1) */
+#define REG_SMC_SETUP2 REG_ACCESS(RwReg, 0x400E0020U) /**< \brief (SMC) SMC Setup Register (CS_number = 2) */
+#define REG_SMC_PULSE2 REG_ACCESS(RwReg, 0x400E0024U) /**< \brief (SMC) SMC Pulse Register (CS_number = 2) */
+#define REG_SMC_CYCLE2 REG_ACCESS(RwReg, 0x400E0028U) /**< \brief (SMC) SMC Cycle Register (CS_number = 2) */
+#define REG_SMC_MODE2 REG_ACCESS(RwReg, 0x400E002CU) /**< \brief (SMC) SMC Mode Register (CS_number = 2) */
+#define REG_SMC_SETUP3 REG_ACCESS(RwReg, 0x400E0030U) /**< \brief (SMC) SMC Setup Register (CS_number = 3) */
+#define REG_SMC_PULSE3 REG_ACCESS(RwReg, 0x400E0034U) /**< \brief (SMC) SMC Pulse Register (CS_number = 3) */
+#define REG_SMC_CYCLE3 REG_ACCESS(RwReg, 0x400E0038U) /**< \brief (SMC) SMC Cycle Register (CS_number = 3) */
+#define REG_SMC_MODE3 REG_ACCESS(RwReg, 0x400E003CU) /**< \brief (SMC) SMC Mode Register (CS_number = 3) */
+#define REG_SMC_SETUP4 REG_ACCESS(RwReg, 0x400E0040U) /**< \brief (SMC) SMC Setup Register (CS_number = 4) */
+#define REG_SMC_PULSE4 REG_ACCESS(RwReg, 0x400E0044U) /**< \brief (SMC) SMC Pulse Register (CS_number = 4) */
+#define REG_SMC_CYCLE4 REG_ACCESS(RwReg, 0x400E0048U) /**< \brief (SMC) SMC Cycle Register (CS_number = 4) */
+#define REG_SMC_MODE4 REG_ACCESS(RwReg, 0x400E004CU) /**< \brief (SMC) SMC Mode Register (CS_number = 4) */
+#define REG_SMC_OCMS REG_ACCESS(RwReg, 0x400E0080U) /**< \brief (SMC) SMC OCMS MODE Register */
+#define REG_SMC_KEY1 REG_ACCESS(WoReg, 0x400E0084U) /**< \brief (SMC) SMC OCMS KEY1 Register */
+#define REG_SMC_KEY2 REG_ACCESS(WoReg, 0x400E0088U) /**< \brief (SMC) SMC OCMS KEY2 Register */
+#define REG_SMC_WPMR REG_ACCESS(RwReg, 0x400E00E4U) /**< \brief (SMC) SMC Write Protect Mode Register */
+#define REG_SMC_WPSR REG_ACCESS(RoReg, 0x400E00E8U) /**< \brief (SMC) SMC Write Protect Status Register */
+/* ========== Register definition for MATRIX peripheral ========== */
+#define REG_MATRIX_MCFG REG_ACCESS(RwReg, 0x400E0200U) /**< \brief (MATRIX) Master Configuration Register */
+#define REG_MATRIX_SCFG REG_ACCESS(RwReg, 0x400E0240U) /**< \brief (MATRIX) Slave Configuration Register */
+#define REG_MATRIX_PRAS0 REG_ACCESS(RwReg, 0x400E0280U) /**< \brief (MATRIX) Priority Register A for Slave 0 */
+#define REG_MATRIX_PRAS1 REG_ACCESS(RwReg, 0x400E0288U) /**< \brief (MATRIX) Priority Register A for Slave 1 */
+#define REG_MATRIX_PRAS2 REG_ACCESS(RwReg, 0x400E0290U) /**< \brief (MATRIX) Priority Register A for Slave 2 */
+#define REG_MATRIX_PRAS3 REG_ACCESS(RwReg, 0x400E0298U) /**< \brief (MATRIX) Priority Register A for Slave 3 */
+#define REG_MATRIX_PRAS4 REG_ACCESS(RwReg, 0x400E02A0U) /**< \brief (MATRIX) Priority Register A for Slave 4 */
+#define REG_MATRIX_SYSIO REG_ACCESS(RwReg, 0x400E0314U) /**< \brief (MATRIX) System I/O Configuration register */
+#define REG_MATRIX_SMCNFCS REG_ACCESS(RwReg, 0x400E031CU) /**< \brief (MATRIX) SMC Chip Select NAND Flash Assignment Register */
+#define REG_MATRIX_WPMR REG_ACCESS(RwReg, 0x400E03E4U) /**< \brief (MATRIX) Write Protect Mode Register */
+#define REG_MATRIX_WPSR REG_ACCESS(RoReg, 0x400E03E8U) /**< \brief (MATRIX) Write Protect Status Register */
+/* ========== Register definition for PMC peripheral ========== */
+#define REG_PMC_SCER REG_ACCESS(WoReg, 0x400E0400U) /**< \brief (PMC) System Clock Enable Register */
+#define REG_PMC_SCDR REG_ACCESS(WoReg, 0x400E0404U) /**< \brief (PMC) System Clock Disable Register */
+#define REG_PMC_SCSR REG_ACCESS(RoReg, 0x400E0408U) /**< \brief (PMC) System Clock Status Register */
+#define REG_PMC_PCER0 REG_ACCESS(WoReg, 0x400E0410U) /**< \brief (PMC) Peripheral Clock Enable Register 0 */
+#define REG_PMC_PCDR0 REG_ACCESS(WoReg, 0x400E0414U) /**< \brief (PMC) Peripheral Clock Disable Register 0 */
+#define REG_PMC_PCSR0 REG_ACCESS(RoReg, 0x400E0418U) /**< \brief (PMC) Peripheral Clock Status Register 0 */
+#define REG_PMC_MOR REG_ACCESS(RwReg, 0x400E0420U) /**< \brief (PMC) Main Oscillator Register */
+#define REG_PMC_MCFR REG_ACCESS(RoReg, 0x400E0424U) /**< \brief (PMC) Main Clock Frequency Register */
+#define REG_PMC_PLLAR REG_ACCESS(RwReg, 0x400E0428U) /**< \brief (PMC) PLLA Register */
+#define REG_PMC_PLLBR REG_ACCESS(RwReg, 0x400E042CU) /**< \brief (PMC) PLLB Register */
+#define REG_PMC_MCKR REG_ACCESS(RwReg, 0x400E0430U) /**< \brief (PMC) Master Clock Register */
+#define REG_PMC_USB REG_ACCESS(RwReg, 0x400E0438U) /**< \brief (PMC) USB Clock Register */
+#define REG_PMC_PCK REG_ACCESS(RwReg, 0x400E0440U) /**< \brief (PMC) Programmable Clock 0 Register */
+#define REG_PMC_IER REG_ACCESS(WoReg, 0x400E0460U) /**< \brief (PMC) Interrupt Enable Register */
+#define REG_PMC_IDR REG_ACCESS(WoReg, 0x400E0464U) /**< \brief (PMC) Interrupt Disable Register */
+#define REG_PMC_SR REG_ACCESS(RoReg, 0x400E0468U) /**< \brief (PMC) Status Register */
+#define REG_PMC_IMR REG_ACCESS(RoReg, 0x400E046CU) /**< \brief (PMC) Interrupt Mask Register */
+#define REG_PMC_FSMR REG_ACCESS(RwReg, 0x400E0470U) /**< \brief (PMC) Fast Startup Mode Register */
+#define REG_PMC_FSPR REG_ACCESS(RwReg, 0x400E0474U) /**< \brief (PMC) Fast Startup Polarity Register */
+#define REG_PMC_FOCR REG_ACCESS(WoReg, 0x400E0478U) /**< \brief (PMC) Fault Output Clear Register */
+#define REG_PMC_WPMR REG_ACCESS(RwReg, 0x400E04E4U) /**< \brief (PMC) Write Protect Mode Register */
+#define REG_PMC_WPSR REG_ACCESS(RoReg, 0x400E04E8U) /**< \brief (PMC) Write Protect Status Register */
+#define REG_PMC_PCER1 REG_ACCESS(WoReg, 0x400E0500U) /**< \brief (PMC) Peripheral Clock Enable Register 1 */
+#define REG_PMC_PCDR1 REG_ACCESS(WoReg, 0x400E0504U) /**< \brief (PMC) Peripheral Clock Disable Register 1 */
+#define REG_PMC_PCSR1 REG_ACCESS(RoReg, 0x400E0508U) /**< \brief (PMC) Peripheral Clock Status Register 1 */
+#define REG_PMC_OCR REG_ACCESS(RwReg, 0x400E0510U) /**< \brief (PMC) Oscillator Calibration Register */
+/* ========== Register definition for UART0 peripheral ========== */
+#define REG_UART0_CR REG_ACCESS(WoReg, 0x400E0600U) /**< \brief (UART0) Control Register */
+#define REG_UART0_MR REG_ACCESS(RwReg, 0x400E0604U) /**< \brief (UART0) Mode Register */
+#define REG_UART0_IER REG_ACCESS(WoReg, 0x400E0608U) /**< \brief (UART0) Interrupt Enable Register */
+#define REG_UART0_IDR REG_ACCESS(WoReg, 0x400E060CU) /**< \brief (UART0) Interrupt Disable Register */
+#define REG_UART0_IMR REG_ACCESS(RoReg, 0x400E0610U) /**< \brief (UART0) Interrupt Mask Register */
+#define REG_UART0_SR REG_ACCESS(RoReg, 0x400E0614U) /**< \brief (UART0) Status Register */
+#define REG_UART0_RHR REG_ACCESS(RoReg, 0x400E0618U) /**< \brief (UART0) Receive Holding Register */
+#define REG_UART0_THR REG_ACCESS(WoReg, 0x400E061CU) /**< \brief (UART0) Transmit Holding Register */
+#define REG_UART0_BRGR REG_ACCESS(RwReg, 0x400E0620U) /**< \brief (UART0) Baud Rate Generator Register */
+#define REG_UART0_RPR REG_ACCESS(RwReg, 0x400E0700U) /**< \brief (UART0) Receive Pointer Register */
+#define REG_UART0_RCR REG_ACCESS(RwReg, 0x400E0704U) /**< \brief (UART0) Receive Counter Register */
+#define REG_UART0_TPR REG_ACCESS(RwReg, 0x400E0708U) /**< \brief (UART0) Transmit Pointer Register */
+#define REG_UART0_TCR REG_ACCESS(RwReg, 0x400E070CU) /**< \brief (UART0) Transmit Counter Register */
+#define REG_UART0_RNPR REG_ACCESS(RwReg, 0x400E0710U) /**< \brief (UART0) Receive Next Pointer Register */
+#define REG_UART0_RNCR REG_ACCESS(RwReg, 0x400E0714U) /**< \brief (UART0) Receive Next Counter Register */
+#define REG_UART0_TNPR REG_ACCESS(RwReg, 0x400E0718U) /**< \brief (UART0) Transmit Next Pointer Register */
+#define REG_UART0_TNCR REG_ACCESS(RwReg, 0x400E071CU) /**< \brief (UART0) Transmit Next Counter Register */
+#define REG_UART0_PTCR REG_ACCESS(WoReg, 0x400E0720U) /**< \brief (UART0) Transfer Control Register */
+#define REG_UART0_PTSR REG_ACCESS(RoReg, 0x400E0724U) /**< \brief (UART0) Transfer Status Register */
+/* ========== Register definition for CHIPID peripheral ========== */
+#define REG_CHIPID_CIDR REG_ACCESS(RoReg, 0x400E0740U) /**< \brief (CHIPID) Chip ID Register */
+#define REG_CHIPID_EXID REG_ACCESS(RoReg, 0x400E0744U) /**< \brief (CHIPID) Chip ID Extension Register */
+/* ========== Register definition for UART1 peripheral ========== */
+#define REG_UART1_CR REG_ACCESS(WoReg, 0x400E0800U) /**< \brief (UART1) Control Register */
+#define REG_UART1_MR REG_ACCESS(RwReg, 0x400E0804U) /**< \brief (UART1) Mode Register */
+#define REG_UART1_IER REG_ACCESS(WoReg, 0x400E0808U) /**< \brief (UART1) Interrupt Enable Register */
+#define REG_UART1_IDR REG_ACCESS(WoReg, 0x400E080CU) /**< \brief (UART1) Interrupt Disable Register */
+#define REG_UART1_IMR REG_ACCESS(RoReg, 0x400E0810U) /**< \brief (UART1) Interrupt Mask Register */
+#define REG_UART1_SR REG_ACCESS(RoReg, 0x400E0814U) /**< \brief (UART1) Status Register */
+#define REG_UART1_RHR REG_ACCESS(RoReg, 0x400E0818U) /**< \brief (UART1) Receive Holding Register */
+#define REG_UART1_THR REG_ACCESS(WoReg, 0x400E081CU) /**< \brief (UART1) Transmit Holding Register */
+#define REG_UART1_BRGR REG_ACCESS(RwReg, 0x400E0820U) /**< \brief (UART1) Baud Rate Generator Register */
+#define REG_UART1_RPR REG_ACCESS(RwReg, 0x400E0900U) /**< \brief (UART1) Receive Pointer Register */
+#define REG_UART1_RCR REG_ACCESS(RwReg, 0x400E0904U) /**< \brief (UART1) Receive Counter Register */
+#define REG_UART1_TPR REG_ACCESS(RwReg, 0x400E0908U) /**< \brief (UART1) Transmit Pointer Register */
+#define REG_UART1_TCR REG_ACCESS(RwReg, 0x400E090CU) /**< \brief (UART1) Transmit Counter Register */
+#define REG_UART1_RNPR REG_ACCESS(RwReg, 0x400E0910U) /**< \brief (UART1) Receive Next Pointer Register */
+#define REG_UART1_RNCR REG_ACCESS(RwReg, 0x400E0914U) /**< \brief (UART1) Receive Next Counter Register */
+#define REG_UART1_TNPR REG_ACCESS(RwReg, 0x400E0918U) /**< \brief (UART1) Transmit Next Pointer Register */
+#define REG_UART1_TNCR REG_ACCESS(RwReg, 0x400E091CU) /**< \brief (UART1) Transmit Next Counter Register */
+#define REG_UART1_PTCR REG_ACCESS(WoReg, 0x400E0920U) /**< \brief (UART1) Transfer Control Register */
+#define REG_UART1_PTSR REG_ACCESS(RoReg, 0x400E0924U) /**< \brief (UART1) Transfer Status Register */
+/* ========== Register definition for EFC peripheral ========== */
+#define REG_EFC_FMR REG_ACCESS(RwReg, 0x400E0A00U) /**< \brief (EFC) EEFC Flash Mode Register */
+#define REG_EFC_FCR REG_ACCESS(WoReg, 0x400E0A04U) /**< \brief (EFC) EEFC Flash Command Register */
+#define REG_EFC_FSR REG_ACCESS(RoReg, 0x400E0A08U) /**< \brief (EFC) EEFC Flash Status Register */
+#define REG_EFC_FRR REG_ACCESS(RoReg, 0x400E0A0CU) /**< \brief (EFC) EEFC Flash Result Register */
+/* ========== Register definition for PIOA peripheral ========== */
+#define REG_PIOA_PER REG_ACCESS(WoReg, 0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */
+#define REG_PIOA_PDR REG_ACCESS(WoReg, 0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */
+#define REG_PIOA_PSR REG_ACCESS(RoReg, 0x400E0E08U) /**< \brief (PIOA) PIO Status Register */
+#define REG_PIOA_OER REG_ACCESS(WoReg, 0x400E0E10U) /**< \brief (PIOA) Output Enable Register */
+#define REG_PIOA_ODR REG_ACCESS(WoReg, 0x400E0E14U) /**< \brief (PIOA) Output Disable Register */
+#define REG_PIOA_OSR REG_ACCESS(RoReg, 0x400E0E18U) /**< \brief (PIOA) Output Status Register */
+#define REG_PIOA_IFER REG_ACCESS(WoReg, 0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */
+#define REG_PIOA_IFDR REG_ACCESS(WoReg, 0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */
+#define REG_PIOA_IFSR REG_ACCESS(RoReg, 0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */
+#define REG_PIOA_SODR REG_ACCESS(WoReg, 0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */
+#define REG_PIOA_CODR REG_ACCESS(WoReg, 0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */
+#define REG_PIOA_ODSR REG_ACCESS(RwReg, 0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */
+#define REG_PIOA_PDSR REG_ACCESS(RoReg, 0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */
+#define REG_PIOA_IER REG_ACCESS(WoReg, 0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */
+#define REG_PIOA_IDR REG_ACCESS(WoReg, 0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */
+#define REG_PIOA_IMR REG_ACCESS(RoReg, 0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */
+#define REG_PIOA_ISR REG_ACCESS(RoReg, 0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */
+#define REG_PIOA_MDER REG_ACCESS(WoReg, 0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */
+#define REG_PIOA_MDDR REG_ACCESS(WoReg, 0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */
+#define REG_PIOA_MDSR REG_ACCESS(RoReg, 0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */
+#define REG_PIOA_PUDR REG_ACCESS(WoReg, 0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */
+#define REG_PIOA_PUER REG_ACCESS(WoReg, 0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */
+#define REG_PIOA_PUSR REG_ACCESS(RoReg, 0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */
+#define REG_PIOA_ABCDSR REG_ACCESS(RwReg, 0x400E0E70U) /**< \brief (PIOA) Peripheral Select Register */
+#define REG_PIOA_IFSCDR REG_ACCESS(WoReg, 0x400E0E80U) /**< \brief (PIOA) Input Filter Slow Clock Disable Register */
+#define REG_PIOA_IFSCER REG_ACCESS(WoReg, 0x400E0E84U) /**< \brief (PIOA) Input Filter Slow Clock Enable Register */
+#define REG_PIOA_IFSCSR REG_ACCESS(RoReg, 0x400E0E88U) /**< \brief (PIOA) Input Filter Slow Clock Status Register */
+#define REG_PIOA_SCDR REG_ACCESS(RwReg, 0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */
+#define REG_PIOA_PPDDR REG_ACCESS(WoReg, 0x400E0E90U) /**< \brief (PIOA) Pad Pull-down Disable Register */
+#define REG_PIOA_PPDER REG_ACCESS(WoReg, 0x400E0E94U) /**< \brief (PIOA) Pad Pull-down Enable Register */
+#define REG_PIOA_PPDSR REG_ACCESS(RoReg, 0x400E0E98U) /**< \brief (PIOA) Pad Pull-down Status Register */
+#define REG_PIOA_OWER REG_ACCESS(WoReg, 0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */
+#define REG_PIOA_OWDR REG_ACCESS(WoReg, 0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */
+#define REG_PIOA_OWSR REG_ACCESS(RoReg, 0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */
+#define REG_PIOA_AIMER REG_ACCESS(WoReg, 0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */
+#define REG_PIOA_AIMDR REG_ACCESS(WoReg, 0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */
+#define REG_PIOA_AIMMR REG_ACCESS(RoReg, 0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */
+#define REG_PIOA_ESR REG_ACCESS(WoReg, 0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */
+#define REG_PIOA_LSR REG_ACCESS(WoReg, 0x400E0EC4U) /**< \brief (PIOA) Level Select Register */
+#define REG_PIOA_ELSR REG_ACCESS(RoReg, 0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */
+#define REG_PIOA_FELLSR REG_ACCESS(WoReg, 0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */
+#define REG_PIOA_REHLSR REG_ACCESS(WoReg, 0x400E0ED4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */
+#define REG_PIOA_FRLHSR REG_ACCESS(RoReg, 0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */
+#define REG_PIOA_LOCKSR REG_ACCESS(RoReg, 0x400E0EE0U) /**< \brief (PIOA) Lock Status */
+#define REG_PIOA_WPMR REG_ACCESS(RwReg, 0x400E0EE4U) /**< \brief (PIOA) Write Protect Mode Register */
+#define REG_PIOA_WPSR REG_ACCESS(RoReg, 0x400E0EE8U) /**< \brief (PIOA) Write Protect Status Register */
+#define REG_PIOA_SCHMITT REG_ACCESS(RwReg, 0x400E0F00U) /**< \brief (PIOA) Schmitt Trigger Register */
+#define REG_PIOA_PCMR REG_ACCESS(RwReg, 0x400E0F50U) /**< \brief (PIOA) Parallel Capture Mode Register */
+#define REG_PIOA_PCIER REG_ACCESS(WoReg, 0x400E0F54U) /**< \brief (PIOA) Parallel Capture Interrupt Enable Register */
+#define REG_PIOA_PCIDR REG_ACCESS(WoReg, 0x400E0F58U) /**< \brief (PIOA) Parallel Capture Interrupt Disable Register */
+#define REG_PIOA_PCIMR REG_ACCESS(RoReg, 0x400E0F5CU) /**< \brief (PIOA) Parallel Capture Interrupt Mask Register */
+#define REG_PIOA_PCISR REG_ACCESS(RoReg, 0x400E0F60U) /**< \brief (PIOA) Parallel Capture Interrupt Status Register */
+#define REG_PIOA_PCRHR REG_ACCESS(RoReg, 0x400E0F64U) /**< \brief (PIOA) Parallel Capture Reception Holding Register */
+#define REG_PIOA_RPR REG_ACCESS(RwReg, 0x400E0F68U) /**< \brief (PIOA) Receive Pointer Register */
+#define REG_PIOA_RCR REG_ACCESS(RwReg, 0x400E0F6CU) /**< \brief (PIOA) Receive Counter Register */
+#define REG_PIOA_TPR REG_ACCESS(RwReg, 0x400E0F70U) /**< \brief (PIOA) Transmit Pointer Register */
+#define REG_PIOA_TCR REG_ACCESS(RwReg, 0x400E0F74U) /**< \brief (PIOA) Transmit Counter Register */
+#define REG_PIOA_RNPR REG_ACCESS(RwReg, 0x400E0F78U) /**< \brief (PIOA) Receive Next Pointer Register */
+#define REG_PIOA_RNCR REG_ACCESS(RwReg, 0x400E0F7CU) /**< \brief (PIOA) Receive Next Counter Register */
+#define REG_PIOA_TNPR REG_ACCESS(RwReg, 0x400E0F80U) /**< \brief (PIOA) Transmit Next Pointer Register */
+#define REG_PIOA_TNCR REG_ACCESS(RwReg, 0x400E0F84U) /**< \brief (PIOA) Transmit Next Counter Register */
+#define REG_PIOA_PTCR REG_ACCESS(WoReg, 0x400E0F88U) /**< \brief (PIOA) Transfer Control Register */
+#define REG_PIOA_PTSR REG_ACCESS(RoReg, 0x400E0F8CU) /**< \brief (PIOA) Transfer Status Register */
+/* ========== Register definition for PIOB peripheral ========== */
+#define REG_PIOB_PER REG_ACCESS(WoReg, 0x400E1000U) /**< \brief (PIOB) PIO Enable Register */
+#define REG_PIOB_PDR REG_ACCESS(WoReg, 0x400E1004U) /**< \brief (PIOB) PIO Disable Register */
+#define REG_PIOB_PSR REG_ACCESS(RoReg, 0x400E1008U) /**< \brief (PIOB) PIO Status Register */
+#define REG_PIOB_OER REG_ACCESS(WoReg, 0x400E1010U) /**< \brief (PIOB) Output Enable Register */
+#define REG_PIOB_ODR REG_ACCESS(WoReg, 0x400E1014U) /**< \brief (PIOB) Output Disable Register */
+#define REG_PIOB_OSR REG_ACCESS(RoReg, 0x400E1018U) /**< \brief (PIOB) Output Status Register */
+#define REG_PIOB_IFER REG_ACCESS(WoReg, 0x400E1020U) /**< \brief (PIOB) Glitch Input Filter Enable Register */
+#define REG_PIOB_IFDR REG_ACCESS(WoReg, 0x400E1024U) /**< \brief (PIOB) Glitch Input Filter Disable Register */
+#define REG_PIOB_IFSR REG_ACCESS(RoReg, 0x400E1028U) /**< \brief (PIOB) Glitch Input Filter Status Register */
+#define REG_PIOB_SODR REG_ACCESS(WoReg, 0x400E1030U) /**< \brief (PIOB) Set Output Data Register */
+#define REG_PIOB_CODR REG_ACCESS(WoReg, 0x400E1034U) /**< \brief (PIOB) Clear Output Data Register */
+#define REG_PIOB_ODSR REG_ACCESS(RwReg, 0x400E1038U) /**< \brief (PIOB) Output Data Status Register */
+#define REG_PIOB_PDSR REG_ACCESS(RoReg, 0x400E103CU) /**< \brief (PIOB) Pin Data Status Register */
+#define REG_PIOB_IER REG_ACCESS(WoReg, 0x400E1040U) /**< \brief (PIOB) Interrupt Enable Register */
+#define REG_PIOB_IDR REG_ACCESS(WoReg, 0x400E1044U) /**< \brief (PIOB) Interrupt Disable Register */
+#define REG_PIOB_IMR REG_ACCESS(RoReg, 0x400E1048U) /**< \brief (PIOB) Interrupt Mask Register */
+#define REG_PIOB_ISR REG_ACCESS(RoReg, 0x400E104CU) /**< \brief (PIOB) Interrupt Status Register */
+#define REG_PIOB_MDER REG_ACCESS(WoReg, 0x400E1050U) /**< \brief (PIOB) Multi-driver Enable Register */
+#define REG_PIOB_MDDR REG_ACCESS(WoReg, 0x400E1054U) /**< \brief (PIOB) Multi-driver Disable Register */
+#define REG_PIOB_MDSR REG_ACCESS(RoReg, 0x400E1058U) /**< \brief (PIOB) Multi-driver Status Register */
+#define REG_PIOB_PUDR REG_ACCESS(WoReg, 0x400E1060U) /**< \brief (PIOB) Pull-up Disable Register */
+#define REG_PIOB_PUER REG_ACCESS(WoReg, 0x400E1064U) /**< \brief (PIOB) Pull-up Enable Register */
+#define REG_PIOB_PUSR REG_ACCESS(RoReg, 0x400E1068U) /**< \brief (PIOB) Pad Pull-up Status Register */
+#define REG_PIOB_ABCDSR REG_ACCESS(RwReg, 0x400E1070U) /**< \brief (PIOB) Peripheral Select Register */
+#define REG_PIOB_IFSCDR REG_ACCESS(WoReg, 0x400E1080U) /**< \brief (PIOB) Input Filter Slow Clock Disable Register */
+#define REG_PIOB_IFSCER REG_ACCESS(WoReg, 0x400E1084U) /**< \brief (PIOB) Input Filter Slow Clock Enable Register */
+#define REG_PIOB_IFSCSR REG_ACCESS(RoReg, 0x400E1088U) /**< \brief (PIOB) Input Filter Slow Clock Status Register */
+#define REG_PIOB_SCDR REG_ACCESS(RwReg, 0x400E108CU) /**< \brief (PIOB) Slow Clock Divider Debouncing Register */
+#define REG_PIOB_PPDDR REG_ACCESS(WoReg, 0x400E1090U) /**< \brief (PIOB) Pad Pull-down Disable Register */
+#define REG_PIOB_PPDER REG_ACCESS(WoReg, 0x400E1094U) /**< \brief (PIOB) Pad Pull-down Enable Register */
+#define REG_PIOB_PPDSR REG_ACCESS(RoReg, 0x400E1098U) /**< \brief (PIOB) Pad Pull-down Status Register */
+#define REG_PIOB_OWER REG_ACCESS(WoReg, 0x400E10A0U) /**< \brief (PIOB) Output Write Enable */
+#define REG_PIOB_OWDR REG_ACCESS(WoReg, 0x400E10A4U) /**< \brief (PIOB) Output Write Disable */
+#define REG_PIOB_OWSR REG_ACCESS(RoReg, 0x400E10A8U) /**< \brief (PIOB) Output Write Status Register */
+#define REG_PIOB_AIMER REG_ACCESS(WoReg, 0x400E10B0U) /**< \brief (PIOB) Additional Interrupt Modes Enable Register */
+#define REG_PIOB_AIMDR REG_ACCESS(WoReg, 0x400E10B4U) /**< \brief (PIOB) Additional Interrupt Modes Disables Register */
+#define REG_PIOB_AIMMR REG_ACCESS(RoReg, 0x400E10B8U) /**< \brief (PIOB) Additional Interrupt Modes Mask Register */
+#define REG_PIOB_ESR REG_ACCESS(WoReg, 0x400E10C0U) /**< \brief (PIOB) Edge Select Register */
+#define REG_PIOB_LSR REG_ACCESS(WoReg, 0x400E10C4U) /**< \brief (PIOB) Level Select Register */
+#define REG_PIOB_ELSR REG_ACCESS(RoReg, 0x400E10C8U) /**< \brief (PIOB) Edge/Level Status Register */
+#define REG_PIOB_FELLSR REG_ACCESS(WoReg, 0x400E10D0U) /**< \brief (PIOB) Falling Edge/Low Level Select Register */
+#define REG_PIOB_REHLSR REG_ACCESS(WoReg, 0x400E10D4U) /**< \brief (PIOB) Rising Edge/ High Level Select Register */
+#define REG_PIOB_FRLHSR REG_ACCESS(RoReg, 0x400E10D8U) /**< \brief (PIOB) Fall/Rise - Low/High Status Register */
+#define REG_PIOB_LOCKSR REG_ACCESS(RoReg, 0x400E10E0U) /**< \brief (PIOB) Lock Status */
+#define REG_PIOB_WPMR REG_ACCESS(RwReg, 0x400E10E4U) /**< \brief (PIOB) Write Protect Mode Register */
+#define REG_PIOB_WPSR REG_ACCESS(RoReg, 0x400E10E8U) /**< \brief (PIOB) Write Protect Status Register */
+#define REG_PIOB_SCHMITT REG_ACCESS(RwReg, 0x400E1100U) /**< \brief (PIOB) Schmitt Trigger Register */
+#define REG_PIOB_PCMR REG_ACCESS(RwReg, 0x400E1150U) /**< \brief (PIOB) Parallel Capture Mode Register */
+#define REG_PIOB_PCIER REG_ACCESS(WoReg, 0x400E1154U) /**< \brief (PIOB) Parallel Capture Interrupt Enable Register */
+#define REG_PIOB_PCIDR REG_ACCESS(WoReg, 0x400E1158U) /**< \brief (PIOB) Parallel Capture Interrupt Disable Register */
+#define REG_PIOB_PCIMR REG_ACCESS(RoReg, 0x400E115CU) /**< \brief (PIOB) Parallel Capture Interrupt Mask Register */
+#define REG_PIOB_PCISR REG_ACCESS(RoReg, 0x400E1160U) /**< \brief (PIOB) Parallel Capture Interrupt Status Register */
+#define REG_PIOB_PCRHR REG_ACCESS(RoReg, 0x400E1164U) /**< \brief (PIOB) Parallel Capture Reception Holding Register */
+/* ========== Register definition for PIOC peripheral ========== */
+#define REG_PIOC_PER REG_ACCESS(WoReg, 0x400E1200U) /**< \brief (PIOC) PIO Enable Register */
+#define REG_PIOC_PDR REG_ACCESS(WoReg, 0x400E1204U) /**< \brief (PIOC) PIO Disable Register */
+#define REG_PIOC_PSR REG_ACCESS(RoReg, 0x400E1208U) /**< \brief (PIOC) PIO Status Register */
+#define REG_PIOC_OER REG_ACCESS(WoReg, 0x400E1210U) /**< \brief (PIOC) Output Enable Register */
+#define REG_PIOC_ODR REG_ACCESS(WoReg, 0x400E1214U) /**< \brief (PIOC) Output Disable Register */
+#define REG_PIOC_OSR REG_ACCESS(RoReg, 0x400E1218U) /**< \brief (PIOC) Output Status Register */
+#define REG_PIOC_IFER REG_ACCESS(WoReg, 0x400E1220U) /**< \brief (PIOC) Glitch Input Filter Enable Register */
+#define REG_PIOC_IFDR REG_ACCESS(WoReg, 0x400E1224U) /**< \brief (PIOC) Glitch Input Filter Disable Register */
+#define REG_PIOC_IFSR REG_ACCESS(RoReg, 0x400E1228U) /**< \brief (PIOC) Glitch Input Filter Status Register */
+#define REG_PIOC_SODR REG_ACCESS(WoReg, 0x400E1230U) /**< \brief (PIOC) Set Output Data Register */
+#define REG_PIOC_CODR REG_ACCESS(WoReg, 0x400E1234U) /**< \brief (PIOC) Clear Output Data Register */
+#define REG_PIOC_ODSR REG_ACCESS(RwReg, 0x400E1238U) /**< \brief (PIOC) Output Data Status Register */
+#define REG_PIOC_PDSR REG_ACCESS(RoReg, 0x400E123CU) /**< \brief (PIOC) Pin Data Status Register */
+#define REG_PIOC_IER REG_ACCESS(WoReg, 0x400E1240U) /**< \brief (PIOC) Interrupt Enable Register */
+#define REG_PIOC_IDR REG_ACCESS(WoReg, 0x400E1244U) /**< \brief (PIOC) Interrupt Disable Register */
+#define REG_PIOC_IMR REG_ACCESS(RoReg, 0x400E1248U) /**< \brief (PIOC) Interrupt Mask Register */
+#define REG_PIOC_ISR REG_ACCESS(RoReg, 0x400E124CU) /**< \brief (PIOC) Interrupt Status Register */
+#define REG_PIOC_MDER REG_ACCESS(WoReg, 0x400E1250U) /**< \brief (PIOC) Multi-driver Enable Register */
+#define REG_PIOC_MDDR REG_ACCESS(WoReg, 0x400E1254U) /**< \brief (PIOC) Multi-driver Disable Register */
+#define REG_PIOC_MDSR REG_ACCESS(RoReg, 0x400E1258U) /**< \brief (PIOC) Multi-driver Status Register */
+#define REG_PIOC_PUDR REG_ACCESS(WoReg, 0x400E1260U) /**< \brief (PIOC) Pull-up Disable Register */
+#define REG_PIOC_PUER REG_ACCESS(WoReg, 0x400E1264U) /**< \brief (PIOC) Pull-up Enable Register */
+#define REG_PIOC_PUSR REG_ACCESS(RoReg, 0x400E1268U) /**< \brief (PIOC) Pad Pull-up Status Register */
+#define REG_PIOC_ABCDSR REG_ACCESS(RwReg, 0x400E1270U) /**< \brief (PIOC) Peripheral Select Register */
+#define REG_PIOC_IFSCDR REG_ACCESS(WoReg, 0x400E1280U) /**< \brief (PIOC) Input Filter Slow Clock Disable Register */
+#define REG_PIOC_IFSCER REG_ACCESS(WoReg, 0x400E1284U) /**< \brief (PIOC) Input Filter Slow Clock Enable Register */
+#define REG_PIOC_IFSCSR REG_ACCESS(RoReg, 0x400E1288U) /**< \brief (PIOC) Input Filter Slow Clock Status Register */
+#define REG_PIOC_SCDR REG_ACCESS(RwReg, 0x400E128CU) /**< \brief (PIOC) Slow Clock Divider Debouncing Register */
+#define REG_PIOC_PPDDR REG_ACCESS(WoReg, 0x400E1290U) /**< \brief (PIOC) Pad Pull-down Disable Register */
+#define REG_PIOC_PPDER REG_ACCESS(WoReg, 0x400E1294U) /**< \brief (PIOC) Pad Pull-down Enable Register */
+#define REG_PIOC_PPDSR REG_ACCESS(RoReg, 0x400E1298U) /**< \brief (PIOC) Pad Pull-down Status Register */
+#define REG_PIOC_OWER REG_ACCESS(WoReg, 0x400E12A0U) /**< \brief (PIOC) Output Write Enable */
+#define REG_PIOC_OWDR REG_ACCESS(WoReg, 0x400E12A4U) /**< \brief (PIOC) Output Write Disable */
+#define REG_PIOC_OWSR REG_ACCESS(RoReg, 0x400E12A8U) /**< \brief (PIOC) Output Write Status Register */
+#define REG_PIOC_AIMER REG_ACCESS(WoReg, 0x400E12B0U) /**< \brief (PIOC) Additional Interrupt Modes Enable Register */
+#define REG_PIOC_AIMDR REG_ACCESS(WoReg, 0x400E12B4U) /**< \brief (PIOC) Additional Interrupt Modes Disables Register */
+#define REG_PIOC_AIMMR REG_ACCESS(RoReg, 0x400E12B8U) /**< \brief (PIOC) Additional Interrupt Modes Mask Register */
+#define REG_PIOC_ESR REG_ACCESS(WoReg, 0x400E12C0U) /**< \brief (PIOC) Edge Select Register */
+#define REG_PIOC_LSR REG_ACCESS(WoReg, 0x400E12C4U) /**< \brief (PIOC) Level Select Register */
+#define REG_PIOC_ELSR REG_ACCESS(RoReg, 0x400E12C8U) /**< \brief (PIOC) Edge/Level Status Register */
+#define REG_PIOC_FELLSR REG_ACCESS(WoReg, 0x400E12D0U) /**< \brief (PIOC) Falling Edge/Low Level Select Register */
+#define REG_PIOC_REHLSR REG_ACCESS(WoReg, 0x400E12D4U) /**< \brief (PIOC) Rising Edge/ High Level Select Register */
+#define REG_PIOC_FRLHSR REG_ACCESS(RoReg, 0x400E12D8U) /**< \brief (PIOC) Fall/Rise - Low/High Status Register */
+#define REG_PIOC_LOCKSR REG_ACCESS(RoReg, 0x400E12E0U) /**< \brief (PIOC) Lock Status */
+#define REG_PIOC_WPMR REG_ACCESS(RwReg, 0x400E12E4U) /**< \brief (PIOC) Write Protect Mode Register */
+#define REG_PIOC_WPSR REG_ACCESS(RoReg, 0x400E12E8U) /**< \brief (PIOC) Write Protect Status Register */
+#define REG_PIOC_SCHMITT REG_ACCESS(RwReg, 0x400E1300U) /**< \brief (PIOC) Schmitt Trigger Register */
+#define REG_PIOC_PCMR REG_ACCESS(RwReg, 0x400E1350U) /**< \brief (PIOC) Parallel Capture Mode Register */
+#define REG_PIOC_PCIER REG_ACCESS(WoReg, 0x400E1354U) /**< \brief (PIOC) Parallel Capture Interrupt Enable Register */
+#define REG_PIOC_PCIDR REG_ACCESS(WoReg, 0x400E1358U) /**< \brief (PIOC) Parallel Capture Interrupt Disable Register */
+#define REG_PIOC_PCIMR REG_ACCESS(RoReg, 0x400E135CU) /**< \brief (PIOC) Parallel Capture Interrupt Mask Register */
+#define REG_PIOC_PCISR REG_ACCESS(RoReg, 0x400E1360U) /**< \brief (PIOC) Parallel Capture Interrupt Status Register */
+#define REG_PIOC_PCRHR REG_ACCESS(RoReg, 0x400E1364U) /**< \brief (PIOC) Parallel Capture Reception Holding Register */
+/* ========== Register definition for RSTC peripheral ========== */
+#define REG_RSTC_CR REG_ACCESS(WoReg, 0x400E1400U) /**< \brief (RSTC) Control Register */
+#define REG_RSTC_SR REG_ACCESS(RoReg, 0x400E1404U) /**< \brief (RSTC) Status Register */
+#define REG_RSTC_MR REG_ACCESS(RwReg, 0x400E1408U) /**< \brief (RSTC) Mode Register */
+/* ========== Register definition for SUPC peripheral ========== */
+#define REG_SUPC_CR REG_ACCESS(WoReg, 0x400E1410U) /**< \brief (SUPC) Supply Controller Control Register */
+#define REG_SUPC_SMMR REG_ACCESS(RwReg, 0x400E1414U) /**< \brief (SUPC) Supply Controller Supply Monitor Mode Register */
+#define REG_SUPC_MR REG_ACCESS(RwReg, 0x400E1418U) /**< \brief (SUPC) Supply Controller Mode Register */
+#define REG_SUPC_WUMR REG_ACCESS(RwReg, 0x400E141CU) /**< \brief (SUPC) Supply Controller Wake Up Mode Register */
+#define REG_SUPC_WUIR REG_ACCESS(RwReg, 0x400E1420U) /**< \brief (SUPC) Supply Controller Wake Up Inputs Register */
+#define REG_SUPC_SR REG_ACCESS(RoReg, 0x400E1424U) /**< \brief (SUPC) Supply Controller Status Register */
+/* ========== Register definition for RTT peripheral ========== */
+#define REG_RTT_MR REG_ACCESS(RwReg, 0x400E1430U) /**< \brief (RTT) Mode Register */
+#define REG_RTT_AR REG_ACCESS(RwReg, 0x400E1434U) /**< \brief (RTT) Alarm Register */
+#define REG_RTT_VR REG_ACCESS(RoReg, 0x400E1438U) /**< \brief (RTT) Value Register */
+#define REG_RTT_SR REG_ACCESS(RoReg, 0x400E143CU) /**< \brief (RTT) Status Register */
+/* ========== Register definition for WDT peripheral ========== */
+#define REG_WDT_CR REG_ACCESS(WoReg, 0x400E1450U) /**< \brief (WDT) Control Register */
+#define REG_WDT_MR REG_ACCESS(RwReg, 0x400E1454U) /**< \brief (WDT) Mode Register */
+#define REG_WDT_SR REG_ACCESS(RoReg, 0x400E1458U) /**< \brief (WDT) Status Register */
+/* ========== Register definition for RTC peripheral ========== */
+#define REG_RTC_CR REG_ACCESS(RwReg, 0x400E1460U) /**< \brief (RTC) Control Register */
+#define REG_RTC_MR REG_ACCESS(RwReg, 0x400E1464U) /**< \brief (RTC) Mode Register */
+#define REG_RTC_TIMR REG_ACCESS(RwReg, 0x400E1468U) /**< \brief (RTC) Time Register */
+#define REG_RTC_CALR REG_ACCESS(RwReg, 0x400E146CU) /**< \brief (RTC) Calendar Register */
+#define REG_RTC_TIMALR REG_ACCESS(RwReg, 0x400E1470U) /**< \brief (RTC) Time Alarm Register */
+#define REG_RTC_CALALR REG_ACCESS(RwReg, 0x400E1474U) /**< \brief (RTC) Calendar Alarm Register */
+#define REG_RTC_SR REG_ACCESS(RoReg, 0x400E1478U) /**< \brief (RTC) Status Register */
+#define REG_RTC_SCCR REG_ACCESS(WoReg, 0x400E147CU) /**< \brief (RTC) Status Clear Command Register */
+#define REG_RTC_IER REG_ACCESS(WoReg, 0x400E1480U) /**< \brief (RTC) Interrupt Enable Register */
+#define REG_RTC_IDR REG_ACCESS(WoReg, 0x400E1484U) /**< \brief (RTC) Interrupt Disable Register */
+#define REG_RTC_IMR REG_ACCESS(RoReg, 0x400E1488U) /**< \brief (RTC) Interrupt Mask Register */
+#define REG_RTC_VER REG_ACCESS(RoReg, 0x400E148CU) /**< \brief (RTC) Valid Entry Register */
+/* ========== Register definition for GPBR peripheral ========== */
+#define REG_GPBR_GPBR0 REG_ACCESS(RwReg, 0x400E1490U) /**< \brief (GPBR) General Purpose Backup Register 0 */
+#define REG_GPBR_GPBR1 REG_ACCESS(RwReg, 0x400E1494U) /**< \brief (GPBR) General Purpose Backup Register 1 */
+#define REG_GPBR_GPBR2 REG_ACCESS(RwReg, 0x400E1498U) /**< \brief (GPBR) General Purpose Backup Register 2 */
+#define REG_GPBR_GPBR3 REG_ACCESS(RwReg, 0x400E149CU) /**< \brief (GPBR) General Purpose Backup Register 3 */
+#define REG_GPBR_GPBR4 REG_ACCESS(RwReg, 0x400E14A0U) /**< \brief (GPBR) General Purpose Backup Register 4 */
+#define REG_GPBR_GPBR5 REG_ACCESS(RwReg, 0x400E14A4U) /**< \brief (GPBR) General Purpose Backup Register 5 */
+#define REG_GPBR_GPBR6 REG_ACCESS(RwReg, 0x400E14A8U) /**< \brief (GPBR) General Purpose Backup Register 6 */
+#define REG_GPBR_GPBR7 REG_ACCESS(RwReg, 0x400E14ACU) /**< \brief (GPBR) General Purpose Backup Register 7 */
+/*@}*/
+
+/* ************************************************************************** */
+/* PERIPHERAL ID DEFINITIONS FOR SAM3S */
+/* ************************************************************************** */
+/** \addtogroup SAM3S_id Peripheral Ids Definitions */
+/*@{*/
+
+#define ID_SUPC ( 0) /**< \brief Supply Controller (SUPC) */
+#define ID_RSTC ( 1) /**< \brief Reset Controller (RSTC) */
+#define ID_RTC ( 2) /**< \brief Real Time Clock (RTC) */
+#define ID_RTT ( 3) /**< \brief Real Time Timer (RTT) */
+#define ID_WDT ( 4) /**< \brief Watchdog Timer (WDT) */
+#define ID_PMC ( 5) /**< \brief Power Management Controller (PMC) */
+#define ID_EFC ( 6) /**< \brief Enhanced Embedded Flash Controller (EFC) */
+#define ID_UART0 ( 8) /**< \brief UART 0 (UART0) */
+#define ID_UART1 ( 9) /**< \brief UART 1 (UART1) */
+#define ID_SMC (10) /**< \brief Static Memory Controller (SMC) */
+#define ID_PIOA (11) /**< \brief Parallel I/O Controller A (PIOA) */
+#define ID_PIOB (12) /**< \brief Parallel I/O Controller B (PIOB) */
+#define ID_PIOC (13) /**< \brief Parallel I/O Controller C (PIOC) */
+#define ID_USART0 (14) /**< \brief USART 0 (USART0) */
+#define ID_USART1 (15) /**< \brief USART 1 (USART1) */
+#define ID_HSMCI (18) /**< \brief Multimedia Card Interface (HSMCI) */
+#define ID_TWI0 (19) /**< \brief Two Wire Interface 0 (TWI0) */
+#define ID_TWI1 (20) /**< \brief Two Wire Interface 1 (TWI1) */
+#define ID_SPI (21) /**< \brief Serial Peripheral Interface (SPI) */
+#define ID_SSC (22) /**< \brief Synchronous Serial Controler (SSC) */
+#define ID_TC0 (23) /**< \brief Timer/Counter 0 (TC0) */
+#define ID_TC1 (24) /**< \brief Timer/Counter 1 (TC1) */
+#define ID_TC2 (25) /**< \brief Timer/Counter 2 (TC2) */
+#define ID_TC3 (26) /**< \brief Timer/Counter 3 (TC3) */
+#define ID_TC4 (27) /**< \brief Timer/Counter 4 (TC4) */
+#define ID_TC5 (28) /**< \brief Timer/Counter 5 (TC5) */
+#define ID_ADC (29) /**< \brief Analog To Digital Converter (ADC) */
+#define ID_DACC (30) /**< \brief Digital To Analog Converter (DACC) */
+#define ID_PWM (31) /**< \brief Pulse Width Modulation (PWM) */
+#define ID_CRCCU (32) /**< \brief CRC Calculation Unit (CRCCU) */
+#define ID_ACC (33) /**< \brief Analog Comparator (ACC) */
+#define ID_UDP (34) /**< \brief USB Device Port (UDP) */
+/*@}*/
+
+/* ************************************************************************** */
+/* BASE ADDRESS DEFINITIONS FOR SAM3S */
+/* ************************************************************************** */
+/** \addtogroup SAM3S_base Peripheral Base Address Definitions */
+/*@{*/
+
+#define HSMCI CAST(Hsmci , 0x40000000U) /**< \brief (HSMCI ) Base Address */
+#define PDC_HSMCI CAST(Pdc , 0x40000100U) /**< \brief (PDC_HSMCI ) Base Address */
+#define SSC CAST(Ssc , 0x40004000U) /**< \brief (SSC ) Base Address */
+#define PDC_SSC CAST(Pdc , 0x40004100U) /**< \brief (PDC_SSC ) Base Address */
+#define SPI CAST(Spi , 0x40008000U) /**< \brief (SPI ) Base Address */
+#define PDC_SPI CAST(Pdc , 0x40008100U) /**< \brief (PDC_SPI ) Base Address */
+#define TC0 CAST(Tc , 0x40010000U) /**< \brief (TC0 ) Base Address */
+#define TC1 CAST(Tc , 0x40014000U) /**< \brief (TC1 ) Base Address */
+#define TWI0 CAST(Twi , 0x40018000U) /**< \brief (TWI0 ) Base Address */
+#define PDC_TWI0 CAST(Pdc , 0x40018100U) /**< \brief (PDC_TWI0 ) Base Address */
+#define TWI1 CAST(Twi , 0x4001C000U) /**< \brief (TWI1 ) Base Address */
+#define PDC_TWI1 CAST(Pdc , 0x4001C100U) /**< \brief (PDC_TWI1 ) Base Address */
+#define PWM CAST(Pwm , 0x40020000U) /**< \brief (PWM ) Base Address */
+#define PDC_PWM CAST(Pdc , 0x40020100U) /**< \brief (PDC_PWM ) Base Address */
+#define USART0 CAST(Usart , 0x40024000U) /**< \brief (USART0 ) Base Address */
+#define PDC_USART0 CAST(Pdc , 0x40024100U) /**< \brief (PDC_USART0) Base Address */
+#define USART1 CAST(Usart , 0x40028000U) /**< \brief (USART1 ) Base Address */
+#define PDC_USART1 CAST(Pdc , 0x40028100U) /**< \brief (PDC_USART1) Base Address */
+#define UDP CAST(Udp , 0x40034000U) /**< \brief (UDP ) Base Address */
+#define ADC CAST(Adc , 0x40038000U) /**< \brief (ADC ) Base Address */
+#define PDC_ADC CAST(Pdc , 0x40038100U) /**< \brief (PDC_ADC ) Base Address */
+#define DACC CAST(Dacc , 0x4003C000U) /**< \brief (DACC ) Base Address */
+#define PDC_DACC CAST(Pdc , 0x4003C100U) /**< \brief (PDC_DACC ) Base Address */
+#define ACC CAST(Acc , 0x40040000U) /**< \brief (ACC ) Base Address */
+#define CRCCU CAST(Crccu , 0x40044000U) /**< \brief (CRCCU ) Base Address */
+#define SMC CAST(Smc , 0x400E0000U) /**< \brief (SMC ) Base Address */
+#define MATRIX CAST(Matrix , 0x400E0200U) /**< \brief (MATRIX ) Base Address */
+#define PMC CAST(Pmc , 0x400E0400U) /**< \brief (PMC ) Base Address */
+#define UART0 CAST(Uart , 0x400E0600U) /**< \brief (UART0 ) Base Address */
+#define PDC_UART0 CAST(Pdc , 0x400E0700U) /**< \brief (PDC_UART0 ) Base Address */
+#define CHIPID CAST(Chipid , 0x400E0740U) /**< \brief (CHIPID ) Base Address */
+#define UART1 CAST(Uart , 0x400E0800U) /**< \brief (UART1 ) Base Address */
+#define PDC_UART1 CAST(Pdc , 0x400E0900U) /**< \brief (PDC_UART1 ) Base Address */
+#define EFC CAST(Efc , 0x400E0A00U) /**< \brief (EFC ) Base Address */
+#define PIOA CAST(Pio , 0x400E0E00U) /**< \brief (PIOA ) Base Address */
+#define PDC_PIOA CAST(Pdc , 0x400E0F00U) /**< \brief (PDC_PIOA ) Base Address */
+#define PIOB CAST(Pio , 0x400E1000U) /**< \brief (PIOB ) Base Address */
+#define PIOC CAST(Pio , 0x400E1200U) /**< \brief (PIOC ) Base Address */
+#define RSTC CAST(Rstc , 0x400E1400U) /**< \brief (RSTC ) Base Address */
+#define SUPC CAST(Supc , 0x400E1410U) /**< \brief (SUPC ) Base Address */
+#define RTT CAST(Rtt , 0x400E1430U) /**< \brief (RTT ) Base Address */
+#define WDT CAST(Wdt , 0x400E1450U) /**< \brief (WDT ) Base Address */
+#define RTC CAST(Rtc , 0x400E1460U) /**< \brief (RTC ) Base Address */
+#define GPBR CAST(Gpbr , 0x400E1490U) /**< \brief (GPBR ) Base Address */
+/*@}*/
+
+/* ************************************************************************** */
+/* PIO DEFINITIONS FOR SAM3S */
+/* ************************************************************************** */
+/** \addtogroup SAM3S_pio Peripheral Pio Definitions */
+/*@{*/
+
+#define PIO_PA0 (1u << 0) /**< \brief Pin Controlled by PA0 */
+#define PIO_PA1 (1u << 1) /**< \brief Pin Controlled by PA1 */
+#define PIO_PA2 (1u << 2) /**< \brief Pin Controlled by PA2 */
+#define PIO_PA3 (1u << 3) /**< \brief Pin Controlled by PA3 */
+#define PIO_PA4 (1u << 4) /**< \brief Pin Controlled by PA4 */
+#define PIO_PA5 (1u << 5) /**< \brief Pin Controlled by PA5 */
+#define PIO_PA6 (1u << 6) /**< \brief Pin Controlled by PA6 */
+#define PIO_PA7 (1u << 7) /**< \brief Pin Controlled by PA7 */
+#define PIO_PA8 (1u << 8) /**< \brief Pin Controlled by PA8 */
+#define PIO_PA9 (1u << 9) /**< \brief Pin Controlled by PA9 */
+#define PIO_PA10 (1u << 10) /**< \brief Pin Controlled by PA10 */
+#define PIO_PA11 (1u << 11) /**< \brief Pin Controlled by PA11 */
+#define PIO_PA12 (1u << 12) /**< \brief Pin Controlled by PA12 */
+#define PIO_PA13 (1u << 13) /**< \brief Pin Controlled by PA13 */
+#define PIO_PA14 (1u << 14) /**< \brief Pin Controlled by PA14 */
+#define PIO_PA15 (1u << 15) /**< \brief Pin Controlled by PA15 */
+#define PIO_PA16 (1u << 16) /**< \brief Pin Controlled by PA16 */
+#define PIO_PA17 (1u << 17) /**< \brief Pin Controlled by PA17 */
+#define PIO_PA18 (1u << 18) /**< \brief Pin Controlled by PA18 */
+#define PIO_PA19 (1u << 19) /**< \brief Pin Controlled by PA19 */
+#define PIO_PA20 (1u << 20) /**< \brief Pin Controlled by PA20 */
+#define PIO_PA21 (1u << 21) /**< \brief Pin Controlled by PA21 */
+#define PIO_PA22 (1u << 22) /**< \brief Pin Controlled by PA22 */
+#define PIO_PA23 (1u << 23) /**< \brief Pin Controlled by PA23 */
+#define PIO_PA24 (1u << 24) /**< \brief Pin Controlled by PA24 */
+#define PIO_PA25 (1u << 25) /**< \brief Pin Controlled by PA25 */
+#define PIO_PA26 (1u << 26) /**< \brief Pin Controlled by PA26 */
+#define PIO_PA27 (1u << 27) /**< \brief Pin Controlled by PA27 */
+#define PIO_PA28 (1u << 28) /**< \brief Pin Controlled by PA28 */
+#define PIO_PA29 (1u << 29) /**< \brief Pin Controlled by PA29 */
+#define PIO_PA30 (1u << 30) /**< \brief Pin Controlled by PA30 */
+#define PIO_PA31 (1u << 31) /**< \brief Pin Controlled by PA31 */
+#define PIO_PB0 (1u << 0) /**< \brief Pin Controlled by PB0 */
+#define PIO_PB1 (1u << 1) /**< \brief Pin Controlled by PB1 */
+#define PIO_PB2 (1u << 2) /**< \brief Pin Controlled by PB2 */
+#define PIO_PB3 (1u << 3) /**< \brief Pin Controlled by PB3 */
+#define PIO_PB4 (1u << 4) /**< \brief Pin Controlled by PB4 */
+#define PIO_PB5 (1u << 5) /**< \brief Pin Controlled by PB5 */
+#define PIO_PB6 (1u << 6) /**< \brief Pin Controlled by PB6 */
+#define PIO_PB7 (1u << 7) /**< \brief Pin Controlled by PB7 */
+#define PIO_PB8 (1u << 8) /**< \brief Pin Controlled by PB8 */
+#define PIO_PB9 (1u << 9) /**< \brief Pin Controlled by PB9 */
+#define PIO_PB10 (1u << 10) /**< \brief Pin Controlled by PB10 */
+#define PIO_PB11 (1u << 11) /**< \brief Pin Controlled by PB11 */
+#define PIO_PB12 (1u << 12) /**< \brief Pin Controlled by PB12 */
+#define PIO_PB13 (1u << 13) /**< \brief Pin Controlled by PB13 */
+#define PIO_PB14 (1u << 14) /**< \brief Pin Controlled by PB14 */
+#define PIO_PC0 (1u << 0) /**< \brief Pin Controlled by PC0 */
+#define PIO_PC1 (1u << 1) /**< \brief Pin Controlled by PC1 */
+#define PIO_PC2 (1u << 2) /**< \brief Pin Controlled by PC2 */
+#define PIO_PC3 (1u << 3) /**< \brief Pin Controlled by PC3 */
+#define PIO_PC4 (1u << 4) /**< \brief Pin Controlled by PC4 */
+#define PIO_PC5 (1u << 5) /**< \brief Pin Controlled by PC5 */
+#define PIO_PC6 (1u << 6) /**< \brief Pin Controlled by PC6 */
+#define PIO_PC7 (1u << 7) /**< \brief Pin Controlled by PC7 */
+#define PIO_PC8 (1u << 8) /**< \brief Pin Controlled by PC8 */
+#define PIO_PC9 (1u << 9) /**< \brief Pin Controlled by PC9 */
+#define PIO_PC10 (1u << 10) /**< \brief Pin Controlled by PC10 */
+#define PIO_PC11 (1u << 11) /**< \brief Pin Controlled by PC11 */
+#define PIO_PC12 (1u << 12) /**< \brief Pin Controlled by PC12 */
+#define PIO_PC13 (1u << 13) /**< \brief Pin Controlled by PC13 */
+#define PIO_PC14 (1u << 14) /**< \brief Pin Controlled by PC14 */
+#define PIO_PC15 (1u << 15) /**< \brief Pin Controlled by PC15 */
+#define PIO_PC16 (1u << 16) /**< \brief Pin Controlled by PC16 */
+#define PIO_PC17 (1u << 17) /**< \brief Pin Controlled by PC17 */
+#define PIO_PC18 (1u << 18) /**< \brief Pin Controlled by PC18 */
+#define PIO_PC19 (1u << 19) /**< \brief Pin Controlled by PC19 */
+#define PIO_PC20 (1u << 20) /**< \brief Pin Controlled by PC20 */
+#define PIO_PC21 (1u << 21) /**< \brief Pin Controlled by PC21 */
+#define PIO_PC22 (1u << 22) /**< \brief Pin Controlled by PC22 */
+#define PIO_PC23 (1u << 23) /**< \brief Pin Controlled by PC23 */
+#define PIO_PC24 (1u << 24) /**< \brief Pin Controlled by PC24 */
+#define PIO_PC25 (1u << 25) /**< \brief Pin Controlled by PC25 */
+#define PIO_PC26 (1u << 26) /**< \brief Pin Controlled by PC26 */
+#define PIO_PC27 (1u << 27) /**< \brief Pin Controlled by PC27 */
+#define PIO_PC28 (1u << 28) /**< \brief Pin Controlled by PC28 */
+#define PIO_PC29 (1u << 29) /**< \brief Pin Controlled by PC29 */
+#define PIO_PC30 (1u << 30) /**< \brief Pin Controlled by PC30 */
+#define PIO_PC31 (1u << 31) /**< \brief Pin Controlled by PC31 */
+/* ========== Pio definition for HSMCI peripheral ========== */
+#define PIO_PA28C_MCCDA (1u << 28) /**< \brief Hsmci signal: MCCDA */
+#define PIO_PA29C_MCCK (1u << 29) /**< \brief Hsmci signal: MCCK */
+#define PIO_PA30C_MCDA0 (1u << 30) /**< \brief Hsmci signal: MCDA0 */
+#define PIO_PA31C_MCDA1 (1u << 31) /**< \brief Hsmci signal: MCDA1 */
+#define PIO_PA26C_MCDA2 (1u << 26) /**< \brief Hsmci signal: MCDA2 */
+#define PIO_PA27C_MCDA3 (1u << 27) /**< \brief Hsmci signal: MCDA3 */
+/* ========== Pio definition for SSC peripheral ========== */
+#define PIO_PA18A_RD (1u << 18) /**< \brief Ssc signal: RD */
+#define PIO_PA20A_RF (1u << 20) /**< \brief Ssc signal: RF */
+#define PIO_PA19A_RK (1u << 19) /**< \brief Ssc signal: RK */
+#define PIO_PA17A_TD (1u << 17) /**< \brief Ssc signal: TD */
+#define PIO_PA15A_TF (1u << 15) /**< \brief Ssc signal: TF */
+#define PIO_PA16A_TK (1u << 16) /**< \brief Ssc signal: TK */
+/* ========== Pio definition for SPI peripheral ========== */
+#define PIO_PA12A_MISO (1u << 12) /**< \brief Spi signal: MISO */
+#define PIO_PA13A_MOSI (1u << 13) /**< \brief Spi signal: MOSI */
+#define PIO_PA11A_NPCS0 (1u << 11) /**< \brief Spi signal: NPCS0 */
+#define PIO_PA9B_NPCS1 (1u << 9) /**< \brief Spi signal: NPCS1 */
+#define PIO_PA31A_NPCS1 (1u << 31) /**< \brief Spi signal: NPCS1 */
+#define PIO_PB14A_NPCS1 (1u << 14) /**< \brief Spi signal: NPCS1 */
+#define PIO_PC4B_NPCS1 (1u << 4) /**< \brief Spi signal: NPCS1 */
+#define PIO_PA10B_NPCS2 (1u << 10) /**< \brief Spi signal: NPCS2 */
+#define PIO_PA30B_NPCS2 (1u << 30) /**< \brief Spi signal: NPCS2 */
+#define PIO_PB2B_NPCS2 (1u << 2) /**< \brief Spi signal: NPCS2 */
+#define PIO_PA3B_NPCS3 (1u << 3) /**< \brief Spi signal: NPCS3 */
+#define PIO_PA5B_NPCS3 (1u << 5) /**< \brief Spi signal: NPCS3 */
+#define PIO_PA22B_NPCS3 (1u << 22) /**< \brief Spi signal: NPCS3 */
+#define PIO_PA14A_SPCK (1u << 14) /**< \brief Spi signal: SPCK */
+/* ========== Pio definition for TC0 peripheral ========== */
+#define PIO_PA4B_TCLK0 (1u << 4) /**< \brief Tc0 signal: TCLK0 */
+#define PIO_PA28B_TCLK1 (1u << 28) /**< \brief Tc0 signal: TCLK1 */
+#define PIO_PA29B_TCLK2 (1u << 29) /**< \brief Tc0 signal: TCLK2 */
+#define PIO_PA0B_TIOA0 (1u << 0) /**< \brief Tc0 signal: TIOA0 */
+#define PIO_PA15B_TIOA1 (1u << 15) /**< \brief Tc0 signal: TIOA1 */
+#define PIO_PA26B_TIOA2 (1u << 26) /**< \brief Tc0 signal: TIOA2 */
+#define PIO_PA1B_TIOB0 (1u << 1) /**< \brief Tc0 signal: TIOB0 */
+#define PIO_PA16B_TIOB1 (1u << 16) /**< \brief Tc0 signal: TIOB1 */
+#define PIO_PA27B_TIOB2 (1u << 27) /**< \brief Tc0 signal: TIOB2 */
+/* ========== Pio definition for TC1 peripheral ========== */
+#define PIO_PC25B_TCLK3 (1u << 25) /**< \brief Tc1 signal: TCLK3 */
+#define PIO_PC28B_TCLK4 (1u << 28) /**< \brief Tc1 signal: TCLK4 */
+#define PIO_PC31B_TCLK5 (1u << 31) /**< \brief Tc1 signal: TCLK5 */
+#define PIO_PC23B_TIOA3 (1u << 23) /**< \brief Tc1 signal: TIOA3 */
+#define PIO_PC26B_TIOA4 (1u << 26) /**< \brief Tc1 signal: TIOA4 */
+#define PIO_PC29B_TIOA5 (1u << 29) /**< \brief Tc1 signal: TIOA5 */
+#define PIO_PC24B_TIOB3 (1u << 24) /**< \brief Tc1 signal: TIOB3 */
+#define PIO_PC27B_TIOB4 (1u << 27) /**< \brief Tc1 signal: TIOB4 */
+#define PIO_PC30B_TIOB5 (1u << 30) /**< \brief Tc1 signal: TIOB5 */
+/* ========== Pio definition for TWI0 peripheral ========== */
+#define PIO_PA4A_TWCK0 (1u << 4) /**< \brief Twi0 signal: TWCK0 */
+#define PIO_PA3A_TWD0 (1u << 3) /**< \brief Twi0 signal: TWD0 */
+/* ========== Pio definition for TWI1 peripheral ========== */
+#define PIO_PB5A_TWCK1 (1u << 5) /**< \brief Twi1 signal: TWCK1 */
+#define PIO_PB4A_TWD1 (1u << 4) /**< \brief Twi1 signal: TWD1 */
+/* ========== Pio definition for PWM peripheral ========== */
+#define PIO_PA9C_PWMFI0 (1u << 9) /**< \brief Pwm signal: PWMFI0 */
+#define PIO_PA0A_PWMH0 (1u << 0) /**< \brief Pwm signal: PWMH0 */
+#define PIO_PA11B_PWMH0 (1u << 11) /**< \brief Pwm signal: PWMH0 */
+#define PIO_PA23B_PWMH0 (1u << 23) /**< \brief Pwm signal: PWMH0 */
+#define PIO_PB0A_PWMH0 (1u << 0) /**< \brief Pwm signal: PWMH0 */
+#define PIO_PC18B_PWMH0 (1u << 18) /**< \brief Pwm signal: PWMH0 */
+#define PIO_PA1A_PWMH1 (1u << 1) /**< \brief Pwm signal: PWMH1 */
+#define PIO_PA12B_PWMH1 (1u << 12) /**< \brief Pwm signal: PWMH1 */
+#define PIO_PA24B_PWMH1 (1u << 24) /**< \brief Pwm signal: PWMH1 */
+#define PIO_PB1A_PWMH1 (1u << 1) /**< \brief Pwm signal: PWMH1 */
+#define PIO_PC19B_PWMH1 (1u << 19) /**< \brief Pwm signal: PWMH1 */
+#define PIO_PA2A_PWMH2 (1u << 2) /**< \brief Pwm signal: PWMH2 */
+#define PIO_PA13B_PWMH2 (1u << 13) /**< \brief Pwm signal: PWMH2 */
+#define PIO_PA25B_PWMH2 (1u << 25) /**< \brief Pwm signal: PWMH2 */
+#define PIO_PB4B_PWMH2 (1u << 4) /**< \brief Pwm signal: PWMH2 */
+#define PIO_PC20B_PWMH2 (1u << 20) /**< \brief Pwm signal: PWMH2 */
+#define PIO_PA7B_PWMH3 (1u << 7) /**< \brief Pwm signal: PWMH3 */
+#define PIO_PA14B_PWMH3 (1u << 14) /**< \brief Pwm signal: PWMH3 */
+#define PIO_PA17C_PWMH3 (1u << 17) /**< \brief Pwm signal: PWMH3 */
+#define PIO_PB14B_PWMH3 (1u << 14) /**< \brief Pwm signal: PWMH3 */
+#define PIO_PC21B_PWMH3 (1u << 21) /**< \brief Pwm signal: PWMH3 */
+#define PIO_PA19B_PWML0 (1u << 19) /**< \brief Pwm signal: PWML0 */
+#define PIO_PB5B_PWML0 (1u << 5) /**< \brief Pwm signal: PWML0 */
+#define PIO_PC0B_PWML0 (1u << 0) /**< \brief Pwm signal: PWML0 */
+#define PIO_PC13B_PWML0 (1u << 13) /**< \brief Pwm signal: PWML0 */
+#define PIO_PA20B_PWML1 (1u << 20) /**< \brief Pwm signal: PWML1 */
+#define PIO_PB12A_PWML1 (1u << 12) /**< \brief Pwm signal: PWML1 */
+#define PIO_PC1B_PWML1 (1u << 1) /**< \brief Pwm signal: PWML1 */
+#define PIO_PC15B_PWML1 (1u << 15) /**< \brief Pwm signal: PWML1 */
+#define PIO_PA16C_PWML2 (1u << 16) /**< \brief Pwm signal: PWML2 */
+#define PIO_PA30A_PWML2 (1u << 30) /**< \brief Pwm signal: PWML2 */
+#define PIO_PB13A_PWML2 (1u << 13) /**< \brief Pwm signal: PWML2 */
+#define PIO_PC2B_PWML2 (1u << 2) /**< \brief Pwm signal: PWML2 */
+#define PIO_PA15C_PWML3 (1u << 15) /**< \brief Pwm signal: PWML3 */
+#define PIO_PC3B_PWML3 (1u << 3) /**< \brief Pwm signal: PWML3 */
+#define PIO_PC22B_PWML3 (1u << 22) /**< \brief Pwm signal: PWML3 */
+/* ========== Pio definition for USART0 peripheral ========== */
+#define PIO_PA8A_CTS0 (1u << 8) /**< \brief Usart0 signal: CTS0 */
+#define PIO_PA7A_RTS0 (1u << 7) /**< \brief Usart0 signal: RTS0 */
+#define PIO_PA5A_RXD0 (1u << 5) /**< \brief Usart0 signal: RXD0 */
+#define PIO_PA2B_SCK0 (1u << 2) /**< \brief Usart0 signal: SCK0 */
+#define PIO_PA6A_TXD0 (1u << 6) /**< \brief Usart0 signal: TXD0 */
+/* ========== Pio definition for USART1 peripheral ========== */
+#define PIO_PA25A_CTS1 (1u << 25) /**< \brief Usart1 signal: CTS1 */
+#define PIO_PA26A_DCD1 (1u << 26) /**< \brief Usart1 signal: DCD1 */
+#define PIO_PA28A_DSR1 (1u << 28) /**< \brief Usart1 signal: DSR1 */
+#define PIO_PA27A_DTR1 (1u << 27) /**< \brief Usart1 signal: DTR1 */
+#define PIO_PA29A_RI1 (1u << 29) /**< \brief Usart1 signal: RI1 */
+#define PIO_PA24A_RTS1 (1u << 24) /**< \brief Usart1 signal: RTS1 */
+#define PIO_PA21A_RXD1 (1u << 21) /**< \brief Usart1 signal: RXD1 */
+#define PIO_PA23A_SCK1 (1u << 23) /**< \brief Usart1 signal: SCK1 */
+#define PIO_PA22A_TXD1 (1u << 22) /**< \brief Usart1 signal: TXD1 */
+/* ========== Pio definition for ADC peripheral ========== */
+#define PIO_PA17X1_AD0 (1u << 17) /**< \brief Adc signal: AD0 */
+#define PIO_PA18X1_AD1 (1u << 18) /**< \brief Adc signal: AD1 */
+#define PIO_PC13X1_AD10 (1u << 13) /**< \brief Adc signal: AD10 */
+#define PIO_PC15X1_AD11 (1u << 15) /**< \brief Adc signal: AD11 */
+#define PIO_PC12X1_AD12 (1u << 12) /**< \brief Adc signal: AD12 */
+#define PIO_PC29X1_AD13 (1u << 29) /**< \brief Adc signal: AD13 */
+#define PIO_PC30X1_AD14 (1u << 30) /**< \brief Adc signal: AD14 */
+#define PIO_PA19X1_AD2_WKUP9 (1u << 19) /**< \brief Adc signal: AD2/WKUP9 */
+#define PIO_PA20X1_AD3_WKUP10 (1u << 20) /**< \brief Adc signal: AD3/WKUP10 */
+#define PIO_PB0X1_AD4 (1u << 0) /**< \brief Adc signal: AD4 */
+#define PIO_PB1X1_AD5 (1u << 1) /**< \brief Adc signal: AD5 */
+#define PIO_PB2X1_AD6_WKUP12 (1u << 2) /**< \brief Adc signal: AD6/WKUP12 */
+#define PIO_PB3X1_AD7 (1u << 3) /**< \brief Adc signal: AD7 */
+#define PIO_PA21X1_AD8 (1u << 21) /**< \brief Adc signal: AD8 */
+#define PIO_PA22X1_AD9 (1u << 22) /**< \brief Adc signal: AD9 */
+#define PIO_PA8B_ADTRG (1u << 8) /**< \brief Adc signal: ADTRG */
+/* ========== Pio definition for DACC peripheral ========== */
+#define PIO_PB13X1_DAC0 (1u << 13) /**< \brief Dacc signal: DAC0 */
+#define PIO_PB14X1_DAC1 (1u << 14) /**< \brief Dacc signal: DAC1 */
+#define PIO_PA2C_DATRG (1u << 2) /**< \brief Dacc signal: DATRG */
+/* ========== Pio definition for PMC peripheral ========== */
+#define PIO_PA6B_PCK0 (1u << 6) /**< \brief Pmc signal: PCK0 */
+#define PIO_PB13B_PCK0 (1u << 13) /**< \brief Pmc signal: PCK0 */
+#define PIO_PA17B_PCK1 (1u << 17) /**< \brief Pmc signal: PCK1 */
+#define PIO_PA21B_PCK1 (1u << 21) /**< \brief Pmc signal: PCK1 */
+#define PIO_PA18B_PCK2 (1u << 18) /**< \brief Pmc signal: PCK2 */
+#define PIO_PA31B_PCK2 (1u << 31) /**< \brief Pmc signal: PCK2 */
+#define PIO_PB3B_PCK2 (1u << 3) /**< \brief Pmc signal: PCK2 */
+/* ========== Pio definition for UART0 peripheral ========== */
+#define PIO_PA9A_URXD0 (1u << 9) /**< \brief Uart0 signal: URXD0 */
+#define PIO_PA10A_UTXD0 (1u << 10) /**< \brief Uart0 signal: UTXD0 */
+/* ========== Pio definition for UART1 peripheral ========== */
+#define PIO_PB2A_URXD1 (1u << 2) /**< \brief Uart1 signal: URXD1 */
+#define PIO_PB3A_UTXD1 (1u << 3) /**< \brief Uart1 signal: UTXD1 */
+/* ========== Pio definition for PIOA peripheral ========== */
+#define PIO_PA24D_PIODC0 (1u << 24) /**< \brief Pioa signal: PIODC0 */
+#define PIO_PA25D_PIODC1 (1u << 25) /**< \brief Pioa signal: PIODC1 */
+#define PIO_PA26D_PIODC2 (1u << 26) /**< \brief Pioa signal: PIODC2 */
+#define PIO_PA27D_PIODC3 (1u << 27) /**< \brief Pioa signal: PIODC3 */
+#define PIO_PA28D_PIODC4 (1u << 28) /**< \brief Pioa signal: PIODC4 */
+#define PIO_PA29D_PIODC5 (1u << 29) /**< \brief Pioa signal: PIODC5 */
+#define PIO_PA30D_PIODC6 (1u << 30) /**< \brief Pioa signal: PIODC6 */
+#define PIO_PA31D_PIODC7 (1u << 31) /**< \brief Pioa signal: PIODC7 */
+#define PIO_PA23D_PIODCCLK (1u << 23) /**< \brief Pioa signal: PIODCCLK */
+#define PIO_PA15D_PIODCEN1 (1u << 15) /**< \brief Pioa signal: PIODCEN1 */
+#define PIO_PA16D_PIODCEN2 (1u << 16) /**< \brief Pioa signal: PIODCEN2 */
+/*@}*/
+
+/* ************************************************************************** */
+/* MEMORY MAPPING DEFINITIONS FOR SAM3S */
+/* ************************************************************************** */
+
+#define IFLASH_ADDR (0x00400000u) /**< Internal Flash base address */
+#define IROM_ADDR (0x00800000u) /**< Internal ROM base address */
+#define IRAM_ADDR (0x20000000u) /**< Internal RAM base address */
+#define EBI_CS0_ADDR (0x60000000u) /**< EBI Chip Select 0 base address */
+#define EBI_CS1_ADDR (0x61000000u) /**< EBI Chip Select 1 base address */
+#define EBI_CS2_ADDR (0x62000000u) /**< EBI Chip Select 2 base address */
+#define EBI_CS3_ADDR (0x63000000u) /**< EBI Chip Select 3 base address */
+
+#if defined sam3s1
+#define IFLASH_SIZE 0x10000
+#define IFLASH_PAGE_SIZE (256) /* Internal FLASH 0 Page Size: 256 bytes */
+#define IFLASH_LOCK_REGION_SIZE (16384) /* Internal FLASH 0 Lock Region Size: 16 Kbytes */
+#define IFLASH_NB_OF_PAGES (256) /* Internal FLASH 0 Number of Pages: 256 */
+#define IFLASH_NB_OF_LOCK_BITS (4) /* Internal FLASH 0 Number of Lock Bits: 4 */
+#define IRAM_SIZE 0x4000
+#elif defined sam3s2
+#define IFLASH_SIZE 0x20000
+#define IFLASH_PAGE_SIZE (256) /* Internal FLASH 0 Page Size: 256 bytes */
+#define IFLASH_LOCK_REGION_SIZE (16384) /* Internal FLASH 0 Lock Region Size: 16 Kbytes */
+#define IFLASH_NB_OF_PAGES (512) /* Internal FLASH 0 Number of Pages: 512 */
+#define IFLASH_NB_OF_LOCK_BITS (8) /* Internal FLASH 0 Number of Lock Bits: 8 */
+#define IRAM_SIZE 0x8000
+#elif defined sam3s4
+#define IFLASH_SIZE 0x40000
+#define IFLASH_PAGE_SIZE (256) /* Internal FLASH 0 Page Size: 256 bytes */
+#define IFLASH_LOCK_REGION_SIZE (16384) /* Internal FLASH 0 Lock Region Size: 16 Kbytes */
+#define IFLASH_NB_OF_PAGES (1024) /* Internal FLASH 0 Number of Pages: 1024 */
+#define IFLASH_NB_OF_LOCK_BITS (16) /* Internal FLASH 0 Number of Lock Bits: 16 */
+#define IRAM_SIZE 0xC000
+#else
+ #error Library does not support the specified device.
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+/*@}*/
+
+#endif /* SAM3S_H */
diff --git a/sam3s_example/include/board.h b/sam3s_example/include/board.h
new file mode 100644
index 0000000..3b9b0e6
--- /dev/null
+++ b/sam3s_example/include/board.h
@@ -0,0 +1,23 @@
+#ifndef _BOARD_
+#define _BOARD_
+
+#include "chip.h"
+#include "syscalls.h" /** RedHat Newlib minimal stub */
+
+/** Name of the board */
+#define BOARD_NAME "SAM3S-EK"
+/** Board definition */
+#define sam3sek
+/** Family definition (already defined) */
+#define sam3s
+/** Core definition */
+#define cortexm3
+
+
+#define BOARD_MAINOSC 12000000
+#define BOARD_MCK 48000000
+
+//#define LED_STATUS PIO_PA8
+#define LED_STATUS PIO_PA17
+
+#endif
diff --git a/sam3s_example/include/board_lowlevel.h b/sam3s_example/include/board_lowlevel.h
new file mode 100644
index 0000000..5b58737
--- /dev/null
+++ b/sam3s_example/include/board_lowlevel.h
@@ -0,0 +1,46 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file
+ *
+ * Interface for the low-level initialization function.
+ *
+ */
+
+#ifndef BOARD_LOWLEVEL_H
+#define BOARD_LOWLEVEL_H
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+void LowLevelInit( void ) ;
+
+#endif /* BOARD_LOWLEVEL_H */
+
diff --git a/sam3s_example/include/chip.h b/sam3s_example/include/chip.h
new file mode 100644
index 0000000..fd74e54
--- /dev/null
+++ b/sam3s_example/include/chip.h
@@ -0,0 +1,42 @@
+#ifndef _LIB_SAM3S_
+#define _LIB_SAM3S_
+
+/*
+ * Peripherals registers definitions
+ */
+#if defined sam3s4
+#elif defined sam3s2
+#elif defined sam3s1
+#else
+ #warning Library does not support the specified chip, specifying sam3s4.
+ #define sam3s4
+#endif
+#include "SAM3S.h"
+
+
+/* Define attribute */
+#if defined ( __CC_ARM ) /* Keil µVision 4 */
+ #define WEAK __attribute__ ((weak))
+#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */
+ #define WEAK __weak
+#elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68 */
+ #define WEAK __attribute__ ((weak))
+#endif
+
+/* Define NO_INIT attribute */
+#if defined ( __CC_ARM )
+ #define NO_INIT
+#elif defined ( __ICCARM__ )
+ #define NO_INIT __no_init
+#elif defined ( __GNUC__ )
+ #define NO_INIT
+#endif
+
+
+/*
+ * Core
+ */
+
+#include "exceptions.h"
+
+#endif
diff --git a/sam3s_example/include/exceptions.h b/sam3s_example/include/exceptions.h
new file mode 100644
index 0000000..abfef91
--- /dev/null
+++ b/sam3s_example/include/exceptions.h
@@ -0,0 +1,97 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file
+ * Interface for default exception handlers.
+ */
+
+#ifndef _EXCEPTIONS_
+#define _EXCEPTIONS_
+
+/*----------------------------------------------------------------------------
+ * Types
+ *----------------------------------------------------------------------------*/
+
+/* Function prototype for exception table items (interrupt handler). */
+typedef void( *IntFunc )( void ) ;
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+
+/* Default empty handler */
+extern void IrqHandlerNotUsed( void ) ;
+
+/* Cortex-M3 core handlers */
+extern void NMI_Handler( void );
+extern void HardFault_Handler( void );
+extern void MemManage_Handler( void );
+extern void BusFault_Handler( void );
+extern void UsageFault_Handler( void );
+extern void SVC_Handler( void );
+extern void DebugMon_Handler( void );
+extern void PendSV_Handler( void );
+extern void SysTick_Handler( void );
+
+/* Peripherals handlers */
+extern void ACC_IrqHandler( void ) ;
+extern void ADC_IrqHandler( void ) ;
+extern void CRCCU_IrqHandler( void ) ;
+extern void DAC_IrqHandler( void ) ;
+extern void EEFC_IrqHandler( void ) ;
+extern void MCI_IrqHandler( void ) ;
+extern void PIOA_IrqHandler( void ) ;
+extern void PIOB_IrqHandler( void ) ;
+extern void PIOC_IrqHandler( void ) ;
+extern void PMC_IrqHandler( void ) ;
+extern void PWM_IrqHandler( void ) ;
+extern void RSTC_IrqHandler( void ) ;
+extern void RTC_IrqHandler( void ) ;
+extern void RTT_IrqHandler( void ) ;
+extern void SMC_IrqHandler( void ) ;
+extern void SPI_IrqHandler( void ) ;
+extern void SSC_IrqHandler( void ) ;
+extern void SUPC_IrqHandler( void ) ;
+extern void TC0_IrqHandler( void ) ;
+extern void TC1_IrqHandler( void ) ;
+extern void TC2_IrqHandler( void ) ;
+extern void TC3_IrqHandler( void ) ;
+extern void TC4_IrqHandler( void ) ;
+extern void TC5_IrqHandler( void ) ;
+extern void TWI0_IrqHandler( void ) ;
+extern void TWI1_IrqHandler( void ) ;
+extern void UART0_IrqHandler( void ) ;
+extern void UART1_IrqHandler( void ) ;
+extern void USART0_IrqHandler( void ) ;
+extern void USART1_IrqHandler( void ) ;
+extern void USBD_IrqHandler(void);
+extern void WDT_IrqHandler( void ) ;
+
+#endif /* _EXCEPTIONS_ */
diff --git a/sam3s_example/include/pio.h b/sam3s_example/include/pio.h
new file mode 100644
index 0000000..3abd015
--- /dev/null
+++ b/sam3s_example/include/pio.h
@@ -0,0 +1,206 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2010, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file
+ *
+ * \section Purpose
+ *
+ * This file provides a basic API for PIO configuration and usage of
+ * user-controlled pins. Please refer to the board.h file for a list of
+ * available pin definitions.
+ *
+ * \section Usage
+ *
+ * -# Define a constant pin description array such as the following one, using
+ * the existing definitions provided by the board.h file if possible:
+ * \code
+ * const Pin pPins[] = {PIN_USART0_TXD, PIN_USART0_RXD};
+ * \endcode
+ * Alternatively, it is possible to add new pins by provided the full Pin
+ * structure:
+ * \code
+ * // Pin instance to configure PA10 & PA11 as inputs with the internal
+ * // pull-up enabled.
+ * const Pin pPins = {
+ * (1 << 10) | (1 << 11),
+ * REG_PIOA,
+ * ID_PIOA,
+ * PIO_INPUT,
+ * PIO_PULLUP
+ * };
+ * \endcode
+ * -# Configure a pin array by calling PIO_Configure() with a pointer to the
+ * array and its size (which is computed using the PIO_LISTSIZE macro).
+ * -# Change and get the value of a user-controlled pin using the PIO_Set,
+ * PIO_Clear and PIO_Get methods.
+ * -# Get the level being currently output by a user-controlled pin configured
+ * as an output using PIO_GetOutputDataStatus().
+ */
+
+#ifndef _PIO_
+#define _PIO_
+
+/*
+ * Headers
+ */
+
+#include "chip.h"
+
+#include <stdint.h>
+
+/*
+ * Global Definitions
+ */
+
+/* The pin is controlled by the associated signal of peripheral A. */
+#define PIO_PERIPH_A 0
+/* The pin is controlled by the associated signal of peripheral B. */
+#define PIO_PERIPH_B 1
+/* The pin is controlled by the associated signal of peripheral C. */
+#define PIO_PERIPH_C 2
+/* The pin is controlled by the associated signal of peripheral D. */
+#define PIO_PERIPH_D 3
+/* The pin is an input. */
+#define PIO_INPUT 4
+/* The pin is an output and has a default level of 0. */
+#define PIO_OUTPUT_0 5
+/* The pin is an output and has a default level of 1. */
+#define PIO_OUTPUT_1 6
+
+/* Default pin configuration (no attribute). */
+#define PIO_DEFAULT (0 << 0)
+/* The internal pin pull-up is active. */
+#define PIO_PULLUP (1 << 0)
+/* The internal glitch filter is active. */
+#define PIO_DEGLITCH (1 << 1)
+/* The pin is open-drain. */
+#define PIO_OPENDRAIN (1 << 2)
+
+/* The internal debouncing filter is active. */
+#define PIO_DEBOUNCE (1 << 3)
+
+/* Enable additional interrupt modes. */
+#define PIO_IT_AIME (1 << 4)
+
+/* Interrupt High Level/Rising Edge detection is active. */
+#define PIO_IT_RE_OR_HL (1 << 5)
+/* Interrupt Edge detection is active. */
+#define PIO_IT_EDGE (1 << 6)
+
+/* Low level interrupt is active */
+#define PIO_IT_LOW_LEVEL (0 | 0 | PIO_IT_AIME)
+/* High level interrupt is active */
+#define PIO_IT_HIGH_LEVEL (PIO_IT_RE_OR_HL | 0 | PIO_IT_AIME)
+/* Falling edge interrupt is active */
+#define PIO_IT_FALL_EDGE (0 | PIO_IT_EDGE | PIO_IT_AIME)
+/* Rising edge interrupt is active */
+#define PIO_IT_RISE_EDGE (PIO_IT_RE_OR_HL | PIO_IT_EDGE | PIO_IT_AIME)
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/*
+ * Global Macros
+ */
+
+/**
+ * Calculates the size of an array of Pin instances. The array must be defined
+ * locally (i.e. not a pointer), otherwise the computation will not be correct.
+ * \param pPins Local array of Pin instances.
+ * \return Number of elements in array.
+ */
+#define PIO_LISTSIZE(pPins) (sizeof(pPins) / sizeof(Pin))
+
+/*
+ * Global Types
+ */
+
+
+/*
+ * Describes the type and attribute of one PIO pin or a group of similar pins.
+ * The #type# field can have the following values:
+ * - PIO_PERIPH_A
+ * - PIO_PERIPH_B
+ * - PIO_OUTPUT_0
+ * - PIO_OUTPUT_1
+ * - PIO_INPUT
+ *
+ * The #attribute# field is a bitmask that can either be set to PIO_DEFAULt,
+ * or combine (using bitwise OR '|') any number of the following constants:
+ * - PIO_PULLUP
+ * - PIO_DEGLITCH
+ * - PIO_DEBOUNCE
+ * - PIO_OPENDRAIN
+ * - PIO_IT_LOW_LEVEL
+ * - PIO_IT_HIGH_LEVEL
+ * - PIO_IT_FALL_EDGE
+ * - PIO_IT_RISE_EDGE
+ */
+typedef struct _Pin
+{
+ /* Bitmask indicating which pin(s) to configure. */
+ uint32_t mask;
+ /* Pointer to the PIO controller which has the pin(s). */
+ Pio *pio;
+ /* Peripheral ID of the PIO controller which has the pin(s). */
+ uint8_t id;
+ /* Pin type. */
+ uint8_t type;
+ /* Pin attribute. */
+ uint8_t attribute;
+} Pin ;
+
+/*
+ * Global Access Macros
+ */
+
+/*
+ * Global Functions
+ */
+
+extern uint8_t PIO_Configure( const Pin *list, uint32_t size ) ;
+
+extern void PIO_Set( const Pin *pin ) ;
+
+extern void PIO_Clear( const Pin *pin ) ;
+
+extern uint8_t PIO_Get( const Pin *pin ) ;
+
+extern uint8_t PIO_GetOutputDataStatus( const Pin *pin ) ;
+
+extern void PIO_SetDebounceFilter( const Pin *pin, uint32_t cuttoff );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* #ifndef _PIO_ */
+
diff --git a/sam3s_example/include/pmc.h b/sam3s_example/include/pmc.h
new file mode 100644
index 0000000..d5a06c5
--- /dev/null
+++ b/sam3s_example/include/pmc.h
@@ -0,0 +1,59 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+#ifndef _PMC_
+#define _PMC_
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+#include <stdint.h>
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+extern void PMC_EnablePeripheral( uint32_t dwId ) ;
+extern void PMC_DisablePeripheral( uint32_t dwId ) ;
+
+extern void PMC_EnableAllPeripherals( void ) ;
+extern void PMC_DisableAllPeripherals( void ) ;
+
+extern uint32_t PMC_IsPeriphEnabled( uint32_t dwId ) ;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* #ifndef _PMC_ */
+
diff --git a/sam3s_example/include/spi.h b/sam3s_example/include/spi.h
new file mode 100644
index 0000000..5ac513d
--- /dev/null
+++ b/sam3s_example/include/spi.h
@@ -0,0 +1,115 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file
+ *
+ * Interface for Serial Peripheral Interface (SPI) controller.
+ *
+ */
+
+#ifndef _SPI_
+#define _SPI_
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+
+#include "chip.h"
+
+/*----------------------------------------------------------------------------
+ * Macros
+ *----------------------------------------------------------------------------*/
+
+/**
+ *
+ * Here are several macros which should be used when configuring a SPI
+ * peripheral.
+ *
+ * \section spi_configuration_macros SPI Configuration Macros
+ * - \ref SPI_PCS
+ * - \ref SPI_SCBR
+ * - \ref SPI_DLYBS
+ * - \ref SPI_DLYBCT
+ */
+
+/** Calculate the PCS field value given the chip select NPCS value */
+#define SPI_PCS(npcs) ((~(1 << npcs) & 0xF) << 16)
+
+/** Calculates the value of the CSR SCBR field given the baudrate and MCK. */
+#define SPI_SCBR(baudrate, masterClock) ((uint32_t) (masterClock / baudrate) << 8)
+
+/** Calculates the value of the CSR DLYBS field given the desired delay (in ns) */
+#define SPI_DLYBS(delay, masterClock) ((uint32_t) (((masterClock / 1000000) * delay) / 1000) << 16)
+
+/** Calculates the value of the CSR DLYBCT field given the desired delay (in ns) */
+#define SPI_DLYBCT(delay, masterClock) ((uint32_t) (((masterClock / 1000000) * delay) / 32000) << 24)
+
+/*------------------------------------------------------------------------------ */
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+
+extern void SPI_Enable( Spi* spi ) ;
+extern void SPI_Disable( Spi* spi ) ;
+extern void SPI_EnableIt( Spi* spi, uint32_t dwSources ) ;
+extern void SPI_DisableIt( Spi* spi, uint32_t dwSources ) ;
+
+extern void SPI_Configure( Spi* spi, uint32_t dwId, uint32_t dwConfiguration ) ;
+extern void SPI_ConfigureNPCS( Spi* spi, uint32_t dwNpcs, uint32_t dwConfiguration ) ;
+
+extern uint32_t SPI_Read( Spi* spi ) ;
+extern void SPI_Write( Spi* spi, uint32_t dwNpcs, uint16_t wData ) ;
+
+extern uint32_t SPI_GetStatus( Spi* spi ) ;
+extern uint32_t SPI_IsFinished( Spi* pSpi ) ;
+
+extern void SPI_PdcEnableTx( Spi* spi ) ;
+extern void SPI_PdcDisableTx( Spi* spi ) ;
+extern void SPI_PdcEnableRx( Spi* spi ) ;
+extern void SPI_PdcDisableRx( Spi* spi ) ;
+
+extern void SPI_PdcSetTx( Spi* spi, void* pvTxBuf, uint32_t dwTxCount, void* pvTxNextBuf, uint32_t dwTxNextCount ) ;
+extern void SPI_PdcSetRx( Spi* spi, void* pvRxBuf, uint32_t dwRxCount, void* pvRxNextBuf, uint32_t dwRxNextCount ) ;
+
+extern uint32_t SPI_WriteBuffer( Spi* spi, void* pvBuffer, uint32_t dwLength ) ;
+
+extern uint32_t SPI_ReadBuffer( Spi* spi, void* pvBuffer, uint32_t dwLength ) ;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* #ifndef _SPI_ */
+
diff --git a/sam3s_example/include/syscalls.h b/sam3s_example/include/syscalls.h
new file mode 100644
index 0000000..e9e9325
--- /dev/null
+++ b/sam3s_example/include/syscalls.h
@@ -0,0 +1,65 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file syscalls.h
+ *
+ * Implementation of newlib syscall.
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+
+extern caddr_t _sbrk ( int incr ) ;
+
+extern int link( char *old, char *new ) ;
+
+extern int _close( int file ) ;
+
+extern int _fstat( int file, struct stat *st ) ;
+
+extern int _isatty( int file ) ;
+
+extern int _lseek( int file, int ptr, int dir ) ;
+
+extern int _read(int file, char *ptr, int len) ;
+
+extern int _write( int file, char *ptr, int len ) ;
diff --git a/sam3s_example/src/board_cstartup_gnu.c b/sam3s_example/src/board_cstartup_gnu.c
new file mode 100644
index 0000000..423e775
--- /dev/null
+++ b/sam3s_example/src/board_cstartup_gnu.c
@@ -0,0 +1,172 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2010, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+
+#include "board.h"
+#include "board_lowlevel.h"
+
+/*----------------------------------------------------------------------------
+ * Exported variables
+ *----------------------------------------------------------------------------*/
+
+/* Stack Configuration */
+#define STACK_SIZE 0x900 /** Stack size (in DWords) */
+__attribute__ ((aligned(8),section(".stack")))
+uint32_t pdwStack[STACK_SIZE] ;
+
+/* Initialize segments */
+extern uint32_t _sfixed;
+extern uint32_t _efixed;
+extern uint32_t _etext;
+extern uint32_t _srelocate;
+extern uint32_t _erelocate;
+extern uint32_t _szero;
+extern uint32_t _ezero;
+
+
+/*----------------------------------------------------------------------------
+ * ProtoTypes
+ *----------------------------------------------------------------------------*/
+extern int main( void ) ;
+extern void __libc_init_array( void ) ;
+void ResetException( void ) ;
+
+/*------------------------------------------------------------------------------
+ * Exception Table
+ *------------------------------------------------------------------------------*/
+
+__attribute__((section(".vectors")))
+IntFunc exception_table[] = {
+
+ /* Configure Initial Stack Pointer, using linker-generated symbols */
+ (IntFunc)(&pdwStack[STACK_SIZE-1]),
+ ResetException,
+
+ NMI_Handler,
+ HardFault_Handler,
+ MemManage_Handler,
+ BusFault_Handler,
+ UsageFault_Handler,
+ 0, 0, 0, 0, /* Reserved */
+ SVC_Handler,
+ DebugMon_Handler,
+ 0, /* Reserved */
+ PendSV_Handler,
+ SysTick_Handler,
+
+ /* Configurable interrupts */
+ SUPC_IrqHandler, /* 0 Supply Controller */
+ RSTC_IrqHandler, /* 1 Reset Controller */
+ RTC_IrqHandler, /* 2 Real Time Clock */
+ RTT_IrqHandler, /* 3 Real Time Timer */
+ WDT_IrqHandler, /* 4 Watchdog Timer */
+ PMC_IrqHandler, /* 5 PMC */
+ EEFC_IrqHandler, /* 6 EEFC */
+ IrqHandlerNotUsed, /* 7 Reserved */
+ UART0_IrqHandler, /* 8 UART0 */
+ UART1_IrqHandler, /* 9 UART1 */
+ SMC_IrqHandler, /* 10 SMC */
+ PIOA_IrqHandler, /* 11 Parallel IO Controller A */
+ PIOB_IrqHandler, /* 12 Parallel IO Controller B */
+ PIOC_IrqHandler, /* 13 Parallel IO Controller C */
+ USART0_IrqHandler, /* 14 USART 0 */
+ USART1_IrqHandler, /* 15 USART 1 */
+ IrqHandlerNotUsed, /* 16 Reserved */
+ IrqHandlerNotUsed, /* 17 Reserved */
+ MCI_IrqHandler, /* 18 MCI */
+ TWI0_IrqHandler, /* 19 TWI 0 */
+ TWI1_IrqHandler, /* 20 TWI 1 */
+ SPI_IrqHandler, /* 21 SPI */
+ SSC_IrqHandler, /* 22 SSC */
+ TC0_IrqHandler, /* 23 Timer Counter 0 */
+ TC1_IrqHandler, /* 24 Timer Counter 1 */
+ TC2_IrqHandler, /* 25 Timer Counter 2 */
+ TC3_IrqHandler, /* 26 Timer Counter 3 */
+ TC4_IrqHandler, /* 27 Timer Counter 4 */
+ TC5_IrqHandler, /* 28 Timer Counter 5 */
+ ADC_IrqHandler, /* 29 ADC controller */
+ DAC_IrqHandler, /* 30 DAC controller */
+ PWM_IrqHandler, /* 31 PWM */
+ CRCCU_IrqHandler, /* 32 CRC Calculation Unit */
+ ACC_IrqHandler, /* 33 Analog Comparator */
+ USBD_IrqHandler, /* 34 USB Device Port */
+ IrqHandlerNotUsed /* 35 not used */
+};
+
+/**
+ * \brief This is the code that gets called on processor reset.
+ * To initialize the device, and call the main() routine.
+ */
+void ResetException( void )
+{
+ uint32_t *pSrc, *pDest ;
+
+ /* Low level Initialize */
+ LowLevelInit() ;
+
+ /* Initialize the relocate segment */
+ pSrc = &_etext ;
+ pDest = &_srelocate ;
+
+ if ( pSrc != pDest )
+ {
+ for ( ; pDest < &_erelocate ; )
+ {
+ *pDest++ = *pSrc++ ;
+ }
+ }
+
+ /* Clear the zero segment */
+ for ( pDest = &_szero ; pDest < &_ezero ; )
+ {
+ *pDest++ = 0;
+ }
+
+ /* Set the vector table base address */
+ pSrc = (uint32_t *)&_sfixed;
+ SCB->VTOR = ( (uint32_t)pSrc & SCB_VTOR_TBLOFF_Msk ) ;
+
+ if ( ((uint32_t)pSrc >= IRAM_ADDR) && ((uint32_t)pSrc < IRAM_ADDR+IRAM_SIZE) )
+ {
+ SCB->VTOR |= 1 << SCB_VTOR_TBLBASE_Pos ;
+ }
+
+ /* Initialize the C library */
+ __libc_init_array() ;
+
+ /* Branch to main function */
+ main() ;
+
+ /* Infinite loop */
+ while ( 1 ) ;
+}
+
diff --git a/sam3s_example/src/board_lowlevel.c b/sam3s_example/src/board_lowlevel.c
new file mode 100644
index 0000000..ca9f9dc
--- /dev/null
+++ b/sam3s_example/src/board_lowlevel.c
@@ -0,0 +1,124 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file
+ *
+ * Provides the low-level initialization function that called on chip startup.
+ */
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+
+#include "board.h"
+#include "board_lowlevel.h"
+
+/*----------------------------------------------------------------------------
+ * Local definitions
+ *----------------------------------------------------------------------------*/
+
+/* Clock settings at 48MHz */
+#if (BOARD_MCK == 48000000)
+#define BOARD_OSCOUNT (CKGR_MOR_MOSCXTST(0x8))
+#define BOARD_PLLAR (CKGR_PLLAR_STUCKTO1 \
+ | CKGR_PLLAR_MULA(0x7) \
+ | CKGR_PLLAR_PLLACOUNT(0x1) \
+ | CKGR_PLLAR_DIVA(0x1))
+#define BOARD_MCKR (PMC_MCKR_PRES_CLK_2 | PMC_MCKR_CSS_PLLA_CLK)
+
+/* Clock settings at 64MHz */
+#elif (BOARD_MCK == 64000000)
+#define BOARD_OSCOUNT (CKGR_MOR_MOSCXTST(0x8))
+#define BOARD_PLLAR (CKGR_PLLAR_STUCKTO1 \
+ | CKGR_PLLAR_MULA(0x0f) \
+ | CKGR_PLLAR_PLLACOUNT(0x1) \
+ | CKGR_PLLAR_DIVA(0x3))
+#define BOARD_MCKR (PMC_MCKR_PRES_CLK | PMC_MCKR_CSS_PLLA_CLK)
+
+#else
+ #error "No settings for current BOARD_MCK."
+#endif
+
+/* Define clock timeout */
+#define CLOCK_TIMEOUT 0xFFFFFFFF
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+
+/**
+ * \brief Performs the low-level initialization of the chip.
+ * This includes EFC and master clock configuration.
+ * It also enable a low level on the pin NRST triggers a user reset.
+ */
+WEAK void LowLevelInit( void )
+{
+ uint32_t timeout = 0;
+
+ /* Set 3 FWS for Embedded Flash Access */
+ EFC->EEFC_FMR = EEFC_FMR_FWS(3);
+
+ /* Select external slow clock */
+#if 0
+ if ((SUPC->SUPC_SR & SUPC_SR_OSCSEL) != SUPC_SR_OSCSEL_CRYST)
+ {
+ SUPC->SUPC_CR = (uint32_t)(SUPC_CR_XTALSEL_CRYSTAL_SEL | SUPC_CR_KEY(0xA5));
+ timeout = 0;
+ while (!(SUPC->SUPC_SR & SUPC_SR_OSCSEL_CRYST) );
+ }
+#endif
+
+ /* Initialize main oscillator */
+ if ( !(PMC->CKGR_MOR & CKGR_MOR_MOSCSEL) )
+ {
+ PMC->CKGR_MOR = CKGR_MOR_KEY(0x37) | BOARD_OSCOUNT | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTEN;
+ timeout = 0;
+ while (!(PMC->PMC_SR & PMC_SR_MOSCXTS) && (timeout++ < CLOCK_TIMEOUT));
+ }
+
+ /* Switch to 3-20MHz Xtal oscillator */
+ PMC->CKGR_MOR = CKGR_MOR_KEY(0x37) | BOARD_OSCOUNT | CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTEN | CKGR_MOR_MOSCSEL;
+ timeout = 0;
+ while (!(PMC->PMC_SR & PMC_SR_MOSCSELS) && (timeout++ < CLOCK_TIMEOUT));
+ PMC->PMC_MCKR = (PMC->PMC_MCKR & ~(uint32_t)PMC_MCKR_CSS_Msk) | PMC_MCKR_CSS_MAIN_CLK;
+ for ( timeout = 0; !(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT) ; );
+
+ /* Initialize PLLA */
+ PMC->CKGR_PLLAR = BOARD_PLLAR;
+ timeout = 0;
+ while (!(PMC->PMC_SR & PMC_SR_LOCKA) && (timeout++ < CLOCK_TIMEOUT));
+
+ /* Switch to main clock */
+ PMC->PMC_MCKR = (BOARD_MCKR & ~PMC_MCKR_CSS_Msk) | PMC_MCKR_CSS_MAIN_CLK;
+ for ( timeout = 0; !(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT) ; );
+
+ PMC->PMC_MCKR = BOARD_MCKR ;
+ for ( timeout = 0; !(PMC->PMC_SR & PMC_SR_MCKRDY) && (timeout++ < CLOCK_TIMEOUT) ; );
+}
diff --git a/sam3s_example/src/exceptions.c b/sam3s_example/src/exceptions.c
new file mode 100644
index 0000000..6c55ede
--- /dev/null
+++ b/sam3s_example/src/exceptions.c
@@ -0,0 +1,384 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file
+ * This file contains the default exception handlers.
+ *
+ * \note
+ * The exception handler has weak aliases.
+ * As they are weak aliases, any function with the same name will override
+ * this definition.
+ */
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+
+#include "chip.h"
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+
+/**
+ * \brief Default interrupt handler for not used irq.
+ */
+void IrqHandlerNotUsed( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default NMI interrupt handler.
+ */
+WEAK void NMI_Handler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default HardFault interrupt handler.
+ */
+WEAK void HardFault_Handler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default MemManage interrupt handler.
+ */
+WEAK void MemManage_Handler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default BusFault interrupt handler.
+ */
+WEAK void BusFault_Handler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default UsageFault interrupt handler.
+ */
+WEAK void UsageFault_Handler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SVC interrupt handler.
+ */
+WEAK void SVC_Handler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default DebugMon interrupt handler.
+ */
+WEAK void DebugMon_Handler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default PendSV interrupt handler.
+ */
+WEAK void PendSV_Handler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SysTick interrupt handler.
+ */
+WEAK void SysTick_Handler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for Supply Controller.
+ */
+WEAK void SUPC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for Reset Controller.
+ */
+WEAK void RSTC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for Real Time Clock.
+ */
+WEAK void RTC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for Real Time Timer.
+ */
+WEAK void RTT_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for Watchdog Timer.
+ */
+WEAK void WDT_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for PMC.
+ */
+WEAK void PMC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for EEFC.
+ */
+WEAK void EEFC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for UART0.
+ */
+WEAK void UART0_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for UART1.
+ */
+WEAK void UART1_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for SMC.
+ */
+WEAK void SMC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for PIOA Controller.
+ */
+WEAK void PIOA_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for PIOB Controller.
+ */
+WEAK void PIOB_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for PIOC Controller.
+ */
+WEAK void PIOC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for USART0.
+ */
+WEAK void USART0_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for USART1.
+ */
+WEAK void USART1_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for MCI.
+ */
+WEAK void MCI_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for TWI0.
+ */
+WEAK void TWI0_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for TWI1.
+ */
+WEAK void TWI1_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for SPI.
+ */
+WEAK void SPI_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for SSC.
+ */
+WEAK void SSC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for TC0.
+ */
+WEAK void TC0_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for TC1.
+ */
+WEAK void TC1_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default interrupt handler for TC2.
+ */
+WEAK void TC2_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SUPC interrupt handler for TC3.
+ */
+WEAK void TC3_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SUPC interrupt handler for TC4.
+ */
+WEAK void TC4_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SUPC interrupt handler for TC5.
+ */
+WEAK void TC5_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SUPC interrupt handler for ADC.
+ */
+WEAK void ADC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SUPC interrupt handler for DAC.
+ */
+WEAK void DAC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SUPC interrupt handler for PWM.
+ */
+WEAK void PWM_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SUPC interrupt handler for CRCCU.
+ */
+WEAK void CRCCU_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SUPC interrupt handler for ACC.
+ */
+WEAK void ACC_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
+
+/**
+ * \brief Default SUPC interrupt handler for USBD.
+ */
+WEAK void USBD_IrqHandler( void )
+{
+ while ( 1 ) ;
+}
diff --git a/sam3s_example/src/pio.c b/sam3s_example/src/pio.c
new file mode 100644
index 0000000..3bc258e
--- /dev/null
+++ b/sam3s_example/src/pio.c
@@ -0,0 +1,454 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2010, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/** \file */
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+#include "chip.h"
+#include "pio.h"
+#include "pmc.h"
+
+
+/*----------------------------------------------------------------------------
+ * Local functions
+ *----------------------------------------------------------------------------*/
+
+/**
+ * \brief Configures one or more pin(s) of a PIO controller as being controlled by
+ * peripheral A. Optionally, the corresponding internal pull-up(s) can be enabled.
+ *
+ * \param pio Pointer to a PIO controller.
+ * \param mask Bitmask of one or more pin(s) to configure.
+ * \param enablePullUp Indicates if the pin(s) internal pull-up shall be
+ * configured.
+ */
+static void PIO_SetPeripheralA(
+ Pio *pio,
+ unsigned int mask,
+ unsigned char enablePullUp)
+{
+ unsigned int abcdsr;
+ /* Disable interrupts on the pin(s) */
+ pio->PIO_IDR = mask;
+
+ /* Enable the pull-up(s) if necessary */
+ if (enablePullUp) {
+ pio->PIO_PUER = mask;
+ }
+ else {
+
+ pio->PIO_PUDR = mask;
+ }
+
+ abcdsr = pio->PIO_ABCDSR[0];
+ pio->PIO_ABCDSR[0] &= (~mask & abcdsr);
+ abcdsr = pio->PIO_ABCDSR[1];
+ pio->PIO_ABCDSR[1] &= (~mask & abcdsr);
+ pio->PIO_PDR = mask;
+}
+
+/**
+ * \brief Configures one or more pin(s) of a PIO controller as being controlled by
+ * peripheral B. Optionally, the corresponding internal pull-up(s) can be enabled.
+ *
+ * \param pio Pointer to a PIO controller.
+ * \param mask Bitmask of one or more pin(s) to configure.
+ * \param enablePullUp Indicates if the pin(s) internal pull-up shall be
+ * configured.
+ */
+static void PIO_SetPeripheralB(
+ Pio *pio,
+ unsigned int mask,
+ unsigned char enablePullUp)
+{
+ unsigned int abcdsr;
+ /* Disable interrupts on the pin(s) */
+ pio->PIO_IDR = mask;
+
+ /* Enable the pull-up(s) if necessary */
+ if (enablePullUp) {
+
+ pio->PIO_PUER = mask;
+ }
+ else {
+
+ pio->PIO_PUDR = mask;
+ }
+
+ abcdsr = pio->PIO_ABCDSR[0];
+ pio->PIO_ABCDSR[0] = (mask | abcdsr);
+ abcdsr = pio->PIO_ABCDSR[1];
+ pio->PIO_ABCDSR[1] &= (~mask & abcdsr);
+
+ pio->PIO_PDR = mask;
+}
+
+/**
+ * \brief Configures one or more pin(s) of a PIO controller as being controlled by
+ * peripheral C. Optionally, the corresponding internal pull-up(s) can be enabled.
+ *
+ * \param pio Pointer to a PIO controller.
+ * \param mask Bitmask of one or more pin(s) to configure.
+ * \param enablePullUp Indicates if the pin(s) internal pull-up shall be
+ * configured.
+ */
+static void PIO_SetPeripheralC(
+ Pio *pio,
+ unsigned int mask,
+ unsigned char enablePullUp)
+{
+ unsigned int abcdsr;
+ /* Disable interrupts on the pin(s) */
+ pio->PIO_IDR = mask;
+
+ /* Enable the pull-up(s) if necessary */
+ if (enablePullUp) {
+
+ pio->PIO_PUER = mask;
+ }
+ else {
+
+ pio->PIO_PUDR = mask;
+ }
+
+ abcdsr = pio->PIO_ABCDSR[0];
+ pio->PIO_ABCDSR[0] &= (~mask & abcdsr);
+ abcdsr = pio->PIO_ABCDSR[1];
+ pio->PIO_ABCDSR[1] = (mask | abcdsr);
+
+ pio->PIO_PDR = mask;
+}
+
+/**
+ * \brief Configures one or more pin(s) of a PIO controller as being controlled by
+ * peripheral D. Optionally, the corresponding internal pull-up(s) can be enabled.
+ *
+ * \param pio Pointer to a PIO controller.
+ * \param mask Bitmask of one or more pin(s) to configure.
+ * \param enablePullUp Indicates if the pin(s) internal pull-up shall be
+ * configured.
+ */
+static void PIO_SetPeripheralD(
+ Pio *pio,
+ unsigned int mask,
+ unsigned char enablePullUp)
+{
+ unsigned int abcdsr;
+ /* Disable interrupts on the pin(s) */
+ pio->PIO_IDR = mask;
+
+ /* Enable the pull-up(s) if necessary */
+ if (enablePullUp) {
+
+ pio->PIO_PUER = mask;
+ }
+ else {
+
+ pio->PIO_PUDR = mask;
+ }
+
+ abcdsr = pio->PIO_ABCDSR[0];
+ pio->PIO_ABCDSR[0] = (mask | abcdsr);
+ abcdsr = pio->PIO_ABCDSR[1];
+ pio->PIO_ABCDSR[1] = (mask | abcdsr);
+
+ pio->PIO_PDR = mask;
+}
+
+/**
+ * \brief Configures one or more pin(s) or a PIO controller as inputs. Optionally,
+ * the corresponding internal pull-up(s) and glitch filter(s) can be enabled.
+ *
+ * \param pio Pointer to a PIO controller.
+ * \param mask Bitmask indicating which pin(s) to configure as input(s).
+ * \param enablePullUp Indicates if the internal pull-up(s) must be enabled.
+ * \param enableFilter Indicates if the glitch filter(s) must be enabled.
+ */
+static void PIO_SetInput(
+ Pio *pio,
+ unsigned int mask,
+ unsigned char attribute)
+{
+ /* Disable interrupts */
+ pio->PIO_IDR = mask;
+
+ /* Enable pull-up(s) if necessary */
+ if (attribute & PIO_PULLUP)
+ pio->PIO_PUER = mask;
+ else
+ pio->PIO_PUDR = mask;
+
+ /* Enable Input Filter if necessary */
+ if (attribute & (PIO_DEGLITCH | PIO_DEBOUNCE))
+ pio->PIO_IFER = mask;
+ else
+ pio->PIO_IFDR = mask;
+
+ /* Enable de-glitch or de-bounce if necessary */
+ if (attribute & PIO_DEGLITCH)
+ {
+ pio->PIO_IFSCDR = mask;
+ }
+ else
+ {
+ if (attribute & PIO_DEBOUNCE)
+ {
+ pio->PIO_IFSCER = mask;
+ }
+ }
+
+ /* Configure pin as input */
+ pio->PIO_ODR = mask;
+ pio->PIO_PER = mask;
+}
+
+/**
+ * \brief Configures one or more pin(s) of a PIO controller as outputs, with the
+ * given default value. Optionally, the multi-drive feature can be enabled
+ * on the pin(s).
+ *
+ * \param pio Pointer to a PIO controller.
+ * \param mask Bitmask indicating which pin(s) to configure.
+ * \param defaultValue Default level on the pin(s).
+ * \param enableMultiDrive Indicates if the pin(s) shall be configured as
+ * open-drain.
+ * \param enablePullUp Indicates if the pin shall have its pull-up activated.
+ */
+static void PIO_SetOutput(
+ Pio *pio,
+ unsigned int mask,
+ unsigned char defaultValue,
+ unsigned char enableMultiDrive,
+ unsigned char enablePullUp)
+{
+ /* Disable interrupts */
+ pio->PIO_IDR = mask;
+
+ /* Enable pull-up(s) if necessary */
+ if (enablePullUp) {
+
+ pio->PIO_PUER = mask;
+ }
+ else {
+
+ pio->PIO_PUDR = mask;
+ }
+
+ /* Enable multi-drive if necessary */
+ if (enableMultiDrive) {
+
+ pio->PIO_MDER = mask;
+ }
+ else {
+
+ pio->PIO_MDDR = mask;
+ }
+
+ /* Set default value */
+ if (defaultValue) {
+
+ pio->PIO_SODR = mask;
+ }
+ else {
+
+ pio->PIO_CODR = mask;
+ }
+
+ /* Configure pin(s) as output(s) */
+ pio->PIO_OER = mask;
+ pio->PIO_PER = mask;
+}
+
+/*----------------------------------------------------------------------------
+ * Global functions
+ *----------------------------------------------------------------------------*/
+
+/**
+ * \brief Configures a list of Pin instances, each of which can either hold a single
+ * pin or a group of pins, depending on the mask value; all pins are configured
+ * by this function. The size of the array must also be provided and is easily
+ * computed using PIO_LISTSIZE whenever its length is not known in advance.
+ *
+ * \param list Pointer to a list of Pin instances.
+ * \param size Size of the Pin list (calculated using PIO_LISTSIZE).
+ *
+ * \return 1 if the pins have been configured properly; otherwise 0.
+ */
+uint8_t PIO_Configure( const Pin *list, uint32_t size )
+{
+ /* Configure pins */
+ while ( size > 0 )
+ {
+ switch ( list->type )
+ {
+
+ case PIO_PERIPH_A:
+ PIO_SetPeripheralA(list->pio,
+ list->mask,
+ (list->attribute & PIO_PULLUP) ? 1 : 0);
+ break;
+
+ case PIO_PERIPH_B:
+ PIO_SetPeripheralB(list->pio,
+ list->mask,
+ (list->attribute & PIO_PULLUP) ? 1 : 0);
+ break;
+
+ case PIO_PERIPH_C:
+ PIO_SetPeripheralC(list->pio,
+ list->mask,
+ (list->attribute & PIO_PULLUP) ? 1 : 0);
+ break;
+
+ case PIO_PERIPH_D:
+ PIO_SetPeripheralD(list->pio,
+ list->mask,
+ (list->attribute & PIO_PULLUP) ? 1 : 0);
+ break;
+ case PIO_INPUT:
+ PMC_EnablePeripheral(list->id);
+ PIO_SetInput(list->pio,
+ list->mask,
+ list->attribute);
+ break;
+
+ case PIO_OUTPUT_0:
+ case PIO_OUTPUT_1:
+ PIO_SetOutput(list->pio,
+ list->mask,
+ (list->type == PIO_OUTPUT_1),
+ (list->attribute & PIO_OPENDRAIN) ? 1 : 0,
+ (list->attribute & PIO_PULLUP) ? 1 : 0);
+ break;
+
+ default: return 0;
+ }
+
+ list++;
+ size--;
+ }
+
+ return 1;
+}
+
+/**
+ * \brief Sets a high output level on all the PIOs defined in the given Pin instance.
+ * This has no immediate effects on PIOs that are not output, but the PIO
+ * controller will memorize the value they are changed to outputs.
+ *
+ * \param pin Pointer to a Pin instance describing one or more pins.
+ */
+void PIO_Set(const Pin *pin)
+{
+ pin->pio->PIO_SODR = pin->mask;
+}
+
+/**
+ * \brief Sets a low output level on all the PIOs defined in the given Pin instance.
+ * This has no immediate effects on PIOs that are not output, but the PIO
+ * controller will memorize the value they are changed to outputs.
+ *
+ * \param pin Pointer to a Pin instance describing one or more pins.
+ */
+void PIO_Clear(const Pin *pin)
+{
+ pin->pio->PIO_CODR = pin->mask;
+}
+
+/**
+ * \brief Returns 1 if one or more PIO of the given Pin instance currently have
+ * a high level; otherwise returns 0. This method returns the actual value that
+ * is being read on the pin. To return the supposed output value of a pin, use
+ * PIO_GetOutputDataStatus() instead.
+ *
+ * \param pin Pointer to a Pin instance describing one or more pins.
+ *
+ * \return 1 if the Pin instance contains at least one PIO that currently has
+ * a high level; otherwise 0.
+ */
+unsigned char PIO_Get( const Pin *pin )
+{
+ unsigned int reg ;
+
+ if ( (pin->type == PIO_OUTPUT_0) || (pin->type == PIO_OUTPUT_1) )
+ {
+ reg = pin->pio->PIO_ODSR ;
+ }
+ else
+ {
+ reg = pin->pio->PIO_PDSR ;
+ }
+
+ if ( (reg & pin->mask) == 0 )
+ {
+ return 0 ;
+ }
+ else
+ {
+ return 1 ;
+ }
+}
+
+/**
+ * \brief Returns 1 if one or more PIO of the given Pin are configured to output a
+ * high level (even if they are not output).
+ * To get the actual value of the pin, use PIO_Get() instead.
+ *
+ * \param pin Pointer to a Pin instance describing one or more pins.
+ *
+ * \return 1 if the Pin instance contains at least one PIO that is configured
+ * to output a high level; otherwise 0.
+ */
+unsigned char PIO_GetOutputDataStatus(const Pin *pin)
+{
+ if ((pin->pio->PIO_ODSR & pin->mask) == 0) {
+
+ return 0;
+ }
+ else {
+
+ return 1;
+ }
+}
+
+/*
+ * \brief Configures Glitch or Debouncing filter for input.
+ *
+ * \param pin Pointer to a Pin instance describing one or more pins.
+ * \param cuttoff Cutt off frequency for debounce filter.
+ */
+void PIO_SetDebounceFilter( const Pin *pin, uint32_t cuttoff )
+{
+ Pio *pio = pin->pio;
+
+ pio->PIO_IFSCER = pin->mask; /* set Debouncing, 0 bit field no effect */
+ pio->PIO_SCDR = ((32678/(2*(cuttoff))) - 1) & 0x3FFF; /* the lowest 14 bits work */
+}
diff --git a/sam3s_example/src/pmc.c b/sam3s_example/src/pmc.c
new file mode 100644
index 0000000..4efc8ba
--- /dev/null
+++ b/sam3s_example/src/pmc.c
@@ -0,0 +1,161 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+
+#include "chip.h"
+
+#include <assert.h>
+
+/*----------------------------------------------------------------------------
+ * Local definitions
+ *----------------------------------------------------------------------------*/
+
+#define MASK_STATUS0 0xFFFFFFFC
+#define MASK_STATUS1 0xFFFFFFFF
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+
+/**
+ * \brief Enables the clock of a peripheral. The peripheral ID is used
+ * to identify which peripheral is targetted.
+ *
+ * \note The ID must NOT be shifted (i.e. 1 << ID_xxx).
+ *
+ * \param id Peripheral ID (ID_xxx).
+ */
+extern void PMC_EnablePeripheral( uint32_t dwId )
+{
+ assert( dwId < 35 ) ;
+
+ if ( dwId < 32 )
+ {
+ if ( (PMC->PMC_PCSR0 & ((uint32_t)1 << dwId)) == ((uint32_t)1 << dwId) )
+ {
+ }
+ else
+ {
+ PMC->PMC_PCER0 = 1 << dwId ;
+ }
+ }
+ else
+ {
+ dwId -= 32;
+ if ((PMC->PMC_PCSR1 & ((uint32_t)1 << dwId)) == ((uint32_t)1 << dwId))
+ {
+ }
+ else
+ {
+ PMC->PMC_PCER1 = 1 << dwId ;
+ }
+ }
+}
+
+/**
+ * \brief Disables the clock of a peripheral. The peripheral ID is used
+ * to identify which peripheral is targetted.
+ *
+ * \note The ID must NOT be shifted (i.e. 1 << ID_xxx).
+ *
+ * \param id Peripheral ID (ID_xxx).
+ */
+extern void PMC_DisablePeripheral( uint32_t dwId )
+{
+ assert( dwId < 35 ) ;
+
+ if ( dwId < 32 )
+ {
+ if ( (PMC->PMC_PCSR0 & ((uint32_t)1 << dwId)) != ((uint32_t)1 << dwId) )
+ {
+ }
+ else
+ {
+ PMC->PMC_PCDR0 = 1 << dwId ;
+ }
+ }
+ else
+ {
+ dwId -= 32 ;
+ if ( (PMC->PMC_PCSR1 & ((uint32_t)1 << dwId)) != ((uint32_t)1 << dwId) )
+ {
+ }
+ else
+ {
+ PMC->PMC_PCDR1 = 1 << dwId ;
+ }
+ }
+}
+
+/**
+ * \brief Enable all the periph clock via PMC.
+ */
+extern void PMC_EnableAllPeripherals( void )
+{
+ PMC->PMC_PCER0 = MASK_STATUS0 ;
+ while ( (PMC->PMC_PCSR0 & MASK_STATUS0) != MASK_STATUS0 ) ;
+
+ PMC->PMC_PCER1 = MASK_STATUS1 ;
+ while ( (PMC->PMC_PCSR1 & MASK_STATUS1) != MASK_STATUS1 ) ;
+
+}
+
+/**
+ * \brief Disable all the periph clock via PMC.
+ */
+extern void PMC_DisableAllPeripherals( void )
+{
+ PMC->PMC_PCDR0 = MASK_STATUS0 ;
+ while ( (PMC->PMC_PCSR0 & MASK_STATUS0) != 0 ) ;
+
+ PMC->PMC_PCDR1 = MASK_STATUS1 ;
+ while ( (PMC->PMC_PCSR1 & MASK_STATUS1) != 0 ) ;
+
+}
+
+/**
+ * \brief Get Periph Status for the given peripheral ID.
+ *
+ * \param id Peripheral ID (ID_xxx).
+ */
+extern uint32_t PMC_IsPeriphEnabled( uint32_t dwId )
+{
+ assert( dwId < 35 ) ;
+
+ if ( dwId < 32 )
+ {
+ return ( PMC->PMC_PCSR0 & (1 << dwId) ) ;
+ }
+ else {
+ return ( PMC->PMC_PCSR1 & (1 << (dwId - 32)) ) ;
+ }
+}
diff --git a/sam3s_example/src/spi.c b/sam3s_example/src/spi.c
new file mode 100644
index 0000000..8e4b965
--- /dev/null
+++ b/sam3s_example/src/spi.c
@@ -0,0 +1,352 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/** \addtogroup spi_module Working with SPI
+ * The SPI driver provides the interface to configure and use the SPI
+ * peripheral.
+ *
+ * The Serial Peripheral Interface (SPI) circuit is a synchronous serial
+ * data link that provides communication with external devices in Master
+ * or Slave Mode.
+ *
+ * To use the SPI, the user has to follow these few steps:
+ * -# Enable the SPI pins required by the application (see pio.h).
+ * -# Configure the SPI using the \ref SPI_Configure(). This enables the
+ * peripheral clock. The mode register is loaded with the given value.
+ * -# Configure all the necessary chip selects with \ref SPI_ConfigureNPCS().
+ * -# Enable the SPI by calling \ref SPI_Enable().
+ * -# Send/receive data using \ref SPI_Write() and \ref SPI_Read(). Note that \ref SPI_Read()
+ * must be called after \ref SPI_Write() to retrieve the last value read.
+ * -# Send/receive data using the PDC with the \ref SPI_WriteBuffer() and
+ * \ref SPI_ReadBuffer() functions.
+ * -# Disable the SPI by calling \ref SPI_Disable().
+ *
+ * For more accurate information, please look at the SPI section of the
+ * Datasheet.
+ *
+ * Related files :\n
+ * \ref spi.c\n
+ * \ref spi.h.\n
+*/
+/*@{*/
+/*@}*/
+
+/**
+ * \file
+ *
+ * Implementation of Serial Peripheral Interface (SPI) controller.
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+
+#include "chip.h"
+#include "pmc.h"
+#include "spi.h"
+
+#include <stdint.h>
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+
+/**
+ * \brief Enables a SPI peripheral.
+ *
+ * \param spi Pointer to an Spi instance.
+ */
+extern void SPI_Enable( Spi* spi )
+{
+ spi->SPI_CR = SPI_CR_SPIEN ;
+}
+
+/**
+ * \brief Disables a SPI peripheral.
+ *
+ * \param spi Pointer to an Spi instance.
+ */
+extern void SPI_Disable( Spi* spi )
+{
+ spi->SPI_CR = SPI_CR_SPIDIS ;
+}
+
+/**
+ * \brief Enables one or more interrupt sources of a SPI peripheral.
+ *
+ * \param spi Pointer to an Spi instance.
+ * \param sources Bitwise OR of selected interrupt sources.
+ */
+extern void SPI_EnableIt( Spi* spi, uint32_t dwSources )
+{
+ spi->SPI_IER = dwSources ;
+}
+
+/**
+ * \brief Disables one or more interrupt sources of a SPI peripheral.
+ *
+ * \param spi Pointer to an Spi instance.
+ * \param sources Bitwise OR of selected interrupt sources.
+ */
+extern void SPI_DisableIt( Spi* spi, uint32_t dwSources )
+{
+ spi->SPI_IDR = dwSources ;
+}
+
+/**
+ * \brief Configures a SPI peripheral as specified. The configuration can be computed
+ * using several macros (see \ref spi_configuration_macros).
+ *
+ * \param spi Pointer to an Spi instance.
+ * \param id Peripheral ID of the SPI.
+ * \param configuration Value of the SPI configuration register.
+ */
+extern void SPI_Configure( Spi* spi, uint32_t dwId, uint32_t dwConfiguration )
+{
+ PMC_EnablePeripheral( dwId ) ;
+ spi->SPI_CR = SPI_CR_SPIDIS ;
+
+ /* Execute a software reset of the SPI twice */
+ spi->SPI_CR = SPI_CR_SWRST ;
+ spi->SPI_CR = SPI_CR_SWRST ;
+ spi->SPI_MR = dwConfiguration ;
+}
+
+
+/**
+ * \brief Configures a chip select of a SPI peripheral. The chip select configuration
+ * is computed using several macros (see \ref spi_configuration_macros).
+ *
+ * \param spi Pointer to an Spi instance.
+ * \param npcs Chip select to configure (0, 1, 2 or 3).
+ * \param configuration Desired chip select configuration.
+ */
+void SPI_ConfigureNPCS( Spi* spi, uint32_t dwNpcs, uint32_t dwConfiguration )
+{
+ spi->SPI_CSR[dwNpcs] = dwConfiguration ;
+}
+
+/**
+ * \brief Get the current status register of the given SPI peripheral.
+ * \note This resets the internal value of the status register, so further
+ * read may yield different values.
+ * \param spi Pointer to a Spi instance.
+ * \return SPI status register.
+ */
+extern uint32_t SPI_GetStatus( Spi* spi )
+{
+ return spi->SPI_SR ;
+}
+
+/**
+ * \brief Reads and returns the last word of data received by a SPI peripheral. This
+ * method must be called after a successful SPI_Write call.
+ *
+ * \param spi Pointer to an Spi instance.
+ *
+ * \return readed data.
+ */
+extern uint32_t SPI_Read( Spi* spi )
+{
+ while ( (spi->SPI_SR & SPI_SR_RDRF) == 0 ) ;
+
+ return spi->SPI_RDR & 0xFFFF ;
+}
+
+/**
+ * \brief Sends data through a SPI peripheral. If the SPI is configured to use a fixed
+ * peripheral select, the npcs value is meaningless. Otherwise, it identifies
+ * the component which shall be addressed.
+ *
+ * \param spi Pointer to an Spi instance.
+ * \param npcs Chip select of the component to address (0, 1, 2 or 3).
+ * \param data Word of data to send.
+ */
+extern void SPI_Write( Spi* spi, uint32_t dwNpcs, uint16_t wData )
+{
+ /* Send data */
+ while ( (spi->SPI_SR & SPI_SR_TXEMPTY) == 0 ) ;
+ spi->SPI_TDR = wData | SPI_PCS( dwNpcs ) ;
+ while ( (spi->SPI_SR & SPI_SR_TDRE) == 0 ) ;
+}
+
+/**
+ * \brief Check if SPI transfer finish.
+ *
+ * \param spi Pointer to an Spi instance.
+ *
+ * \return Returns 1 if there is no pending write operation on the SPI; otherwise
+ * returns 0.
+ */
+extern uint32_t SPI_IsFinished( Spi* spi )
+{
+ return ((spi->SPI_SR & SPI_SR_TXEMPTY) != 0) ;
+}
+
+/**
+ * \brief Enable Spi PDC transmit
+ * \param spi Pointer to an Spi instance.
+*/
+extern void SPI_PdcEnableTx( Spi* spi )
+{
+ spi->SPI_PTCR = SPI_PTCR_TXTEN ;
+}
+
+/**
+ * \brief Disable Spi PDC transmit
+ * \param spi Pointer to an Spi instance.
+*/
+extern void SPI_PdcDisableTx( Spi* spi )
+{
+ spi->SPI_PTCR = SPI_PTCR_TXTDIS ;
+}
+
+/**
+ * \brief Enable Spi PDC receive
+ * \param spi Pointer to an Spi instance.
+*/
+extern void SPI_PdcEnableRx( Spi* spi )
+{
+ spi->SPI_PTCR = SPI_PTCR_RXTEN ;
+}
+
+/**
+ * \brief Disable Spi PDC receive
+ * \param spi Pointer to an Spi instance.
+*/
+extern void SPI_PdcDisableRx( Spi* spi )
+{
+ spi->SPI_PTCR = SPI_PTCR_RXTDIS ;
+}
+
+/**
+ * \brief Set PDC transmit and next transmit buffer address and size.
+ *
+ * \param spi Pointer to an Spi instance.
+ * \param txBuf PDC transmit buffer address.
+ * \param txCount Length in bytes of the transmit buffer.
+ * \param txNextBuf PDC next transmit buffer address.
+ * \param txNextCount Length in bytes of the next transmit buffer.
+ */
+extern void SPI_PdcSetTx( Spi* spi, void* pvTxBuf, uint32_t dwTxCount, void* pvTxNextBuf, uint32_t dwTxNextCount )
+{
+ spi->SPI_TPR = (uint32_t)pvTxBuf ;
+ spi->SPI_TCR = dwTxCount ;
+ spi->SPI_TNPR = (uint32_t)pvTxNextBuf ;
+ spi->SPI_TNCR = dwTxNextCount ;
+}
+
+/**
+ * \brief Set PDC receive and next receive buffer address and size.
+ *
+ * \param spi Pointer to an Spi instance.
+ * \param rxBuf PDC receive buffer address.
+ * \param rxCount Length in bytes of the receive buffer.
+ * \param rxNextBuf PDC next receive buffer address.
+ * \param rxNextCount Length in bytes of the next receive buffer.
+ */
+extern void SPI_PdcSetRx( Spi* spi, void* pvRxBuf, uint32_t dwRxCount, void* pvRxNextBuf, uint32_t dwRxNextCount )
+{
+ spi->SPI_RPR = (uint32_t)pvRxBuf ;
+ spi->SPI_RCR = dwRxCount ;
+ spi->SPI_RNPR = (uint32_t)pvRxNextBuf ;
+ spi->SPI_RNCR = dwRxNextCount ;
+}
+
+/**
+ * \brief Sends the contents of buffer through a SPI peripheral, using the PDC to
+ * take care of the transfer.
+ *
+ * \param spi Pointer to an Spi instance.
+ * \param buffer Data buffer to send.
+ * \param length Length of the data buffer.
+ */
+extern uint32_t SPI_WriteBuffer( Spi* spi, void* pvBuffer, uint32_t dwLength )
+{
+ /* Check if first bank is free */
+ if ( spi->SPI_TCR == 0 )
+ {
+ spi->SPI_TPR = (uint32_t)pvBuffer ;
+ spi->SPI_TCR = dwLength ;
+ spi->SPI_PTCR = PERIPH_PTCR_TXTEN ;
+
+ return 1 ;
+ }
+ /* Check if second bank is free */
+ else
+ {
+ if ( spi->SPI_TNCR == 0 )
+ {
+ spi->SPI_TNPR = (uint32_t)pvBuffer ;
+ spi->SPI_TNCR = dwLength ;
+
+ return 1 ;
+ }
+ }
+
+ /* No free banks */
+ return 0 ;
+}
+
+/**
+ * \brief Reads data from a SPI peripheral until the provided buffer is filled. This
+ * method does NOT need to be called after SPI_Write or SPI_WriteBuffer.
+ *
+ * \param spi Pointer to an Spi instance.
+ * \param buffer Data buffer to store incoming bytes.
+ * \param length Length in bytes of the data buffer.
+ */
+extern uint32_t SPI_ReadBuffer( Spi* spi, void *pvBuffer, uint32_t dwLength )
+{
+ /* Check if the first bank is free */
+ if ( spi->SPI_RCR == 0 )
+ {
+ spi->SPI_RPR = (uint32_t)pvBuffer ;
+ spi->SPI_RCR = dwLength ;
+ spi->SPI_PTCR = PERIPH_PTCR_RXTEN ;
+
+ return 1 ;
+ }
+ /* Check if second bank is free */
+ else
+ {
+ if ( spi->SPI_RNCR == 0 )
+ {
+ spi->SPI_RNPR = (uint32_t)pvBuffer ;
+ spi->SPI_RNCR = dwLength ;
+ return 1 ;
+ }
+ }
+
+ /* No free bank */
+ return 0 ;
+}
+
+
diff --git a/sam3s_example/src/syscalls.c b/sam3s_example/src/syscalls.c
new file mode 100644
index 0000000..9b3bfec
--- /dev/null
+++ b/sam3s_example/src/syscalls.c
@@ -0,0 +1,143 @@
+/* ----------------------------------------------------------------------------
+ * ATMEL Microcontroller Software Support
+ * ----------------------------------------------------------------------------
+ * Copyright (c) 2009, Atmel Corporation
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the disclaimer below.
+ *
+ * Atmel's name may not be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ----------------------------------------------------------------------------
+ */
+
+/**
+ * \file syscalls.c
+ *
+ * Implementation of newlib syscall.
+ *
+ */
+
+/*----------------------------------------------------------------------------
+ * Headers
+ *----------------------------------------------------------------------------*/
+
+
+#include "board.h"
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+/*----------------------------------------------------------------------------
+ * Exported variables
+ *----------------------------------------------------------------------------*/
+
+#undef errno
+extern int errno ;
+extern int _end ;
+
+/*----------------------------------------------------------------------------
+ * Exported functions
+ *----------------------------------------------------------------------------*/
+extern void _exit( int status ) ;
+extern void _kill( int pid, int sig ) ;
+extern int _getpid ( void ) ;
+
+extern caddr_t _sbrk ( int incr )
+{
+ static unsigned char *heap = NULL ;
+ unsigned char *prev_heap ;
+
+ if ( heap == NULL )
+ {
+ heap = (unsigned char *)&_end ;
+ }
+ prev_heap = heap;
+
+ heap += incr ;
+
+ return (caddr_t) prev_heap ;
+}
+
+extern int link( char *old, char *new )
+{
+ return -1 ;
+}
+
+extern int _close( int file )
+{
+ return -1 ;
+}
+
+extern int _fstat( int file, struct stat *st )
+{
+ st->st_mode = S_IFCHR ;
+
+ return 0 ;
+}
+
+extern int _isatty( int file )
+{
+ return 1 ;
+}
+
+extern int _lseek( int file, int ptr, int dir )
+{
+ return 0 ;
+}
+
+extern int _read(int file, char *ptr, int len)
+{
+ return 0 ;
+}
+
+extern int _write( int file, char *ptr, int len )
+{
+ //int iIndex ;
+
+
+// for ( ; *ptr != 0 ; ptr++ )
+/* for ( iIndex=0 ; iIndex < len ; iIndex++, ptr++ )
+ {
+ UART_PutChar( *ptr ) ;
+ }
+
+ return iIndex ;
+ */
+ return 0;
+}
+
+extern void _exit( int status )
+{
+ printf( "Exiting with status %d.\n", status ) ;
+
+ for ( ; ; ) ;
+}
+
+extern void _kill( int pid, int sig )
+{
+ return ;
+}
+
+extern int _getpid ( void )
+{
+ return -1 ;
+}