gcc: fix warning

moving the define after the header fixes the following warning:
                 from ./atmel_softpack_libraries/libchip_sam3s/source/exceptions.c:46:
libcommon/include/stdio.h:63:12: warning: redundant redeclaration of 'printf_sync' [-Wredundant-decls]
 signed int printf_sync(const char *pFormat, ...);
            ^~~~~~~~~~~
./atmel_softpack_libraries/libchip_sam3s/source/exceptions.c:45:16: note: previous declaration of 'printf_sync' was here
 #define printf printf_sync
                ^~~~~~~~~~~
libcommon/include/stdio.h:51:12: note: in expansion of macro 'printf'
 signed int printf(const char *pFormat, ...);

Change-Id: I21a8de325e8f8b91297dd157f2d6a0f64434bb28
1 file changed
tree: 9d0fb88686bf02e82756b32ccea4d7e2c82ca239
  1. contrib/
  2. firmware/
  3. hardware/
  4. host/
  5. .gitignore
  6. .gitmodules
  7. clk_calc.py
  8. git-version-gen
  9. README.md
README.md

SIMtrace v2.0

This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.

This is under heavy development, and right now it is not surprising if things still break on a daily basis.

NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.

Supported Hardware

At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.

The goal is to support the following devices:

  • Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
  • sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
  • sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported

This Repository

This repository contains several directory

  • firmware - the firmware to run on the actual devices
  • hardware - some information related to the hardware
  • host - Programs to use on the USB host to interface with the hardware