debian/control: Add dependency to libpcsclite-dev

The host utilities use libpcsclite, and the missing build dependency
causes build failures in our nightly OBS builds since commit
faf1e88e48c216456bdea6060a623b7c31f07c70 was merged:

[  131s] cc -o simtrace2-remsim simtrace2-remsim.o apdu_dispatch.o simtrace2-discovery.o libusb_util.o -Wl,-z,relro `pkg-config --libs libusb-1.0 libosmocore` -pthread `pkg-config --libs libosmosim libpcsclite`
[  131s] Package libpcsclite was not found in the pkg-config search path.
[  131s] Perhaps you should add the directory containing `libpcsclite.pc'
[  131s] to the PKG_CONFIG_PATH environment variable
[  131s] No package 'libpcsclite' found

Change-Id: I29adfc629e5e4ffd0bf8b9035ef9138fe7693d96
1 file changed
tree: 6bde5a80bf585c8d08d6e873dab6c6e9705da9bf
  1. contrib/
  2. debian/
  3. firmware/
  4. hardware/
  5. host/
  6. .gitignore
  7. .gitmodules
  8. clk_calc.py
  9. git-version-gen
  10. Makefile
  11. README.md
README.md

SIMtrace v2.0

This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.

This is under heavy development, and right now it is not surprising if things still break on a daily basis.

NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.

Supported Hardware

At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.

The goal is to support the following devices:

  • Osmocom SIMtrace 1.x with SAM3 controller ** this is open hardware and schematics / PCB design is published
  • sysmocom sysmoQMOD (with 4 Modems, 4 SIM slots and 2 SAM3) ** this is a proprietary device, publicly available from sysmocom
  • sysmocom OWHW (with 2 Modems and 1 SAM3 onboard) ** this is not publicly available hardware, but still supported

This Repository

This repository contains several directory

  • firmware - the firmware to run on the actual devices
  • hardware - some information related to the hardware
  • host - Programs to use on the USB host to interface with the hardware