cosmetic: put spaces around operations
Change-Id: If5ba5f8d16680e8403944274336ea595017063db
diff --git a/firmware/libcommon/source/sniffer.c b/firmware/libcommon/source/sniffer.c
index 5ab60bb..81a6712 100644
--- a/firmware/libcommon/source/sniffer.c
+++ b/firmware/libcommon/source/sniffer.c
@@ -208,10 +208,10 @@
static uint8_t wt_wi = 10; /* Waiting time Integer (WI), used to calculate the Waiting Time (WT) */
static uint8_t wt_d = 1; /* baud rate adjustment integer (the actual value, not the table index) */
- if (0!=wi) {
+ if (0 != wi) {
wt_wi = wi;
}
- if (0!=d) {
+ if (0 != d) {
wt_d = d;
}
wt = wt_wi*960UL*wt_d;
@@ -257,7 +257,7 @@
static void change_state(enum iso7816_3_sniff_state iso_state_new)
{
/* sanity check */
- if (iso_state_new==iso_state) {
+ if (iso_state_new == iso_state) {
TRACE_WARNING("Already in ISO 7816 state %u\n\r", iso_state);
return;
}
@@ -303,11 +303,11 @@
static void usb_send_atr(bool complete)
{
/* Check state */
- if (ISO7816_S_IN_ATR!=iso_state) {
+ if (ISO7816_S_IN_ATR != iso_state) {
TRACE_WARNING("Can't print ATR in ISO 7816-3 state %u\n\r", iso_state);
return;
}
- if (atr_i>=ARRAY_SIZE(atr)) {
+ if (atr_i >= ARRAY_SIZE(atr)) {
TRACE_ERROR("ATR buffer overflow\n\r");
return;
}
@@ -346,11 +346,11 @@
static uint8_t i = 0; /* interface byte subgroup number */
/* sanity check */
- if (ISO7816_S_IN_ATR!=iso_state) {
+ if (ISO7816_S_IN_ATR != iso_state) {
TRACE_ERROR("Processing ATR data in wrong ISO 7816-3 state %u\n\r", iso_state);
return;
}
- if (atr_i>=ARRAY_SIZE(atr)) {
+ if (atr_i >= ARRAY_SIZE(atr)) {
TRACE_ERROR("ATR data overflow\n\r");
return;
}
@@ -377,37 +377,37 @@
break;
case ATR_S_WAIT_T0: /* see ISO/IEC 7816-3:2006 section 8.2.2 */
case ATR_S_WAIT_TD: /* see ISO/IEC 7816-3:2006 section 8.2.3 */
- if (ATR_S_WAIT_T0==atr_state) {
- atr_hist_len = (byte&0x0f); /* save the number of historical bytes */
- } else if (ATR_S_WAIT_TD==atr_state) {
- t_protocol_support |= (1<<(byte&0x0f)); /* remember supported protocol to know if TCK will be present */
+ if (ATR_S_WAIT_T0 == atr_state) {
+ atr_hist_len = (byte & 0x0f); /* save the number of historical bytes */
+ } else if (ATR_S_WAIT_TD == atr_state) {
+ t_protocol_support |= (1<<(byte & 0x0f)); /* remember supported protocol to know if TCK will be present */
}
- y = (byte&0xf0); /* remember upcoming interface bytes */
+ y = (byte & 0xf0); /* remember upcoming interface bytes */
i++; /* next interface byte sub-group is coming */
- if (y&0x10) {
+ if (y & 0x10) {
atr_state = ATR_S_WAIT_TA; /* wait for interface byte TA */
break;
}
case ATR_S_WAIT_TA: /* see ISO/IEC 7816-3:2006 section 8.2.3 */
- if (y&0x20) {
+ if (y & 0x20) {
atr_state = ATR_S_WAIT_TB; /* wait for interface byte TB */
break;
}
case ATR_S_WAIT_TB: /* see ISO/IEC 7816-3:2006 section 8.2.3 */
- if (y&0x40) {
+ if (y & 0x40) {
atr_state = ATR_S_WAIT_TC; /* wait for interface byte TC */
break;
}
case ATR_S_WAIT_TC: /* see ISO/IEC 7816-3:2006 section 8.2.3 */
/* retrieve WI encoded in TC2*/
if (ATR_S_WAIT_TC==atr_state && 2==i) {
- if (0==byte) {
+ if (0 == byte) {
update_wt(10, 0);
} else {
update_wt(byte, 0);
}
}
- if (y&0x80) {
+ if (y & 0x80) {
atr_state = ATR_S_WAIT_TD; /* wait for interface byte TD */
break;
} else if (atr_hist_len) {
@@ -418,8 +418,8 @@
if (atr_hist_len) {
atr_hist_len--;
}
- if (0==atr_hist_len) {
- if (t_protocol_support>1) {
+ if (0 == atr_hist_len) {
+ if (t_protocol_support > 1) {
atr_state = ATR_S_WAIT_TCK; /* wait for check bytes */
break;
}
@@ -445,9 +445,9 @@
uint8_t *pps_cur; /* current PPS (request or response) */
/* Sanity check */
- if (ISO7816_S_IN_PPS_REQ==iso_state) {
+ if (ISO7816_S_IN_PPS_REQ == iso_state) {
pps_cur = pps_req;
- } else if (ISO7816_S_IN_PPS_RSP==iso_state) {
+ } else if (ISO7816_S_IN_PPS_RSP == iso_state) {
pps_cur = pps_rsp;
} else {
TRACE_ERROR("Can't print PPS in ISO 7816-3 state %u\n\r", iso_state);
@@ -457,22 +457,22 @@
/* Get only relevant data */
uint8_t pps[6];
uint8_t pps_i = 0;
- if (pps_state>PPS_S_WAIT_PPSS) {
+ if (pps_state > PPS_S_WAIT_PPSS) {
pps[pps_i++] = pps_cur[0];
}
- if (pps_state>PPS_S_WAIT_PPS0) {
+ if (pps_state > PPS_S_WAIT_PPS0) {
pps[pps_i++] = pps_cur[1];
}
- if (pps_state>PPS_S_WAIT_PPS1 && pps_cur[1]&0x10) {
+ if (pps_state > PPS_S_WAIT_PPS1 && pps_cur[1] & 0x10) {
pps[pps_i++] = pps_cur[2];
}
- if (pps_state>PPS_S_WAIT_PPS2 && pps_cur[1]&0x20) {
+ if (pps_state > PPS_S_WAIT_PPS2 && pps_cur[1] & 0x20) {
pps[pps_i++] = pps_cur[3];
}
- if (pps_state>PPS_S_WAIT_PPS3 && pps_cur[1]&0x40) {
+ if (pps_state > PPS_S_WAIT_PPS3 && pps_cur[1] & 0x40) {
pps[pps_i++] = pps_cur[4];
}
- if (pps_state>PPS_S_WAIT_PCK) {
+ if (pps_state > PPS_S_WAIT_PCK) {
pps[pps_i++] = pps_cur[5];
}
@@ -520,9 +520,9 @@
uint8_t *pps_cur; /* current PPS (request or response) */
/* sanity check */
- if (ISO7816_S_IN_PPS_REQ==iso_state) {
+ if (ISO7816_S_IN_PPS_REQ == iso_state) {
pps_cur = pps_req;
- } else if (ISO7816_S_IN_PPS_RSP==iso_state) {
+ } else if (ISO7816_S_IN_PPS_RSP == iso_state) {
pps_cur = pps_rsp;
} else {
TRACE_ERROR("Processing PPS data in wrong ISO 7816-3 state %u\n\r", iso_state);
@@ -542,19 +542,19 @@
break;
case PPS_S_WAIT_PPS0: /*!< format byte */
pps_cur[1] = byte;
- if (pps_cur[1]&0x10) {
+ if (pps_cur[1] & 0x10) {
pps_state = PPS_S_WAIT_PPS1; /* go to next state */
break;
}
case PPS_S_WAIT_PPS1: /*!< first parameter byte */
pps_cur[2] = byte; /* not always right but doesn't affect the process */
- if (pps_cur[1]&0x20) {
+ if (pps_cur[1] & 0x20) {
pps_state = PPS_S_WAIT_PPS2; /* go to next state */
break;
}
case PPS_S_WAIT_PPS2: /*!< second parameter byte */
pps_cur[3] = byte; /* not always right but doesn't affect the process */
- if (pps_cur[1]&0x40) {
+ if (pps_cur[1] & 0x40) {
pps_state = PPS_S_WAIT_PPS3; /* go to next state */
break;
}
@@ -568,30 +568,30 @@
uint8_t check = 0;
check ^= pps_cur[0];
check ^= pps_cur[1];
- if (pps_cur[1]&0x10) {
+ if (pps_cur[1] & 0x10) {
check ^= pps_cur[2];
}
- if (pps_cur[1]&0x20) {
+ if (pps_cur[1] & 0x20) {
check ^= pps_cur[3];
}
- if (pps_cur[1]&0x40) {
+ if (pps_cur[1] & 0x40) {
check ^= pps_cur[4];
}
check ^= pps_cur[5];
pps_state = PPS_S_WAIT_END;
usb_send_pps(true); /* send PPS to host software using USB */
- if (ISO7816_S_IN_PPS_REQ==iso_state) {
- if (0==check) { /* checksum is valid */
+ if (ISO7816_S_IN_PPS_REQ == iso_state) {
+ if (0 == check) { /* checksum is valid */
change_state(ISO7816_S_WAIT_PPS_RSP); /* go to next state */
} else { /* checksum is invalid */
change_state(ISO7816_S_WAIT_TPDU); /* go to next state */
}
- } else if (ISO7816_S_IN_PPS_RSP==iso_state) {
- if (0==check) { /* checksum is valid */
+ } else if (ISO7816_S_IN_PPS_RSP == iso_state) {
+ if (0 == check) { /* checksum is valid */
uint8_t fn, dn;
- if (pps_cur[1]&0x10) {
- fn = (pps_cur[2]>>4);
- dn = (pps_cur[2]&0x0f);
+ if (pps_cur[1] & 0x10) {
+ fn = (pps_cur[2] >> 4);
+ dn = (pps_cur[2] & 0x0f);
} else {
fn = 1;
dn = 1;
@@ -622,7 +622,7 @@
static void usb_send_tpdu(bool complete)
{
/* Check state */
- if (ISO7816_S_IN_TPDU!=iso_state) {
+ if (ISO7816_S_IN_TPDU != iso_state) {
TRACE_WARNING("Can't print TPDU in ISO 7816-3 state %u\n\r", iso_state);
return;
}
@@ -654,11 +654,11 @@
static void process_byte_tpdu(uint8_t byte)
{
/* sanity check */
- if (ISO7816_S_IN_TPDU!=iso_state) {
+ if (ISO7816_S_IN_TPDU != iso_state) {
TRACE_ERROR("Processing TPDU data in wrong ISO 7816-3 state %u\n\r", iso_state);
return;
}
- if (tpdu_packet_i>=ARRAY_SIZE(tpdu_packet)) {
+ if (tpdu_packet_i >= ARRAY_SIZE(tpdu_packet)) {
TRACE_ERROR("TPDU data overflow\n\r");
return;
}
@@ -666,7 +666,7 @@
/* handle TPDU byte depending on current state */
switch (tpdu_state) {
case TPDU_S_CLA:
- if (0xff==byte) {
+ if (0xff == byte) {
TRACE_WARNING("0xff is not a valid class byte\n\r");
change_state(ISO7816_S_WAIT_TPDU); /* go back to TPDU state */
return;
@@ -676,7 +676,7 @@
tpdu_state = TPDU_S_INS;
break;
case TPDU_S_INS:
- if ((0x60==(byte&0xf0)) || (0x90==(byte&0xf0))) {
+ if ((0x60 == (byte & 0xf0)) || (0x90 == (byte & 0xf0))) {
TRACE_WARNING("invalid CLA 0x%02x\n\r", byte);
change_state(ISO7816_S_WAIT_TPDU); /* go back to TPDU state */
return;
@@ -701,17 +701,17 @@
tpdu_state = TPDU_S_PROCEDURE;
break;
case TPDU_S_PROCEDURE:
- if (0x60==byte) { /* wait for next procedure byte */
+ if (0x60 == byte) { /* wait for next procedure byte */
break;
- } else if (tpdu_packet[1]==byte) { /* get all remaining data bytes */
+ } else if (tpdu_packet[1] == byte) { /* get all remaining data bytes */
tpdu_state = TPDU_S_DATA_REMAINING;
break;
- } else if ((~tpdu_packet[1])==byte) { /* get single data byte */
+ } else if ((~tpdu_packet[1]) == byte) { /* get single data byte */
tpdu_state = TPDU_S_DATA_SINGLE;
break;
}
case TPDU_S_SW1:
- if ((0x60==(byte&0xf0)) || (0x90==(byte&0xf0))) { /* this procedure byte is SW1 */
+ if ((0x60 == (byte & 0xf0)) || (0x90 == (byte & 0xf0))) { /* this procedure byte is SW1 */
tpdu_packet[tpdu_packet_i++] = byte;
tpdu_state = TPDU_S_SW2;
} else {
@@ -728,16 +728,16 @@
case TPDU_S_DATA_SINGLE:
case TPDU_S_DATA_REMAINING:
tpdu_packet[tpdu_packet_i++] = byte;
- if (0==tpdu_packet[4]) {
- if (5+256<=tpdu_packet_i) {
+ if (0 == tpdu_packet[4]) {
+ if (5+256 <= tpdu_packet_i) {
tpdu_state = TPDU_S_PROCEDURE;
}
} else {
- if (5+tpdu_packet[4]<=tpdu_packet_i) {
+ if (5+tpdu_packet[4] <= tpdu_packet_i) {
tpdu_state = TPDU_S_PROCEDURE;
}
}
- if (TPDU_S_DATA_SINGLE==tpdu_state) {
+ if (TPDU_S_DATA_SINGLE == tpdu_state) {
tpdu_state = TPDU_S_PROCEDURE;
}
break;
@@ -780,15 +780,15 @@
/* Verify it WT timeout occurred, to detect unresponsive card */
if (csr & US_CSR_TIMEOUT) {
- if (wt_remaining<=(sniff_usart.base->US_RTOR&0xffff)) {
+ if (wt_remaining <= (sniff_usart.base->US_RTOR & 0xffff)) {
/* Just set the flag and let the main loop handle it */
change_flags |= SNIFF_CHANGE_FLAG_TIMEOUT_WT;
/* Reset timeout value */
wt_remaining = wt;
} else {
- wt_remaining -= (sniff_usart.base->US_RTOR&0xffff); /* be sure to subtract the actual timeout since the new might not have been set and reloaded yet */
+ wt_remaining -= (sniff_usart.base->US_RTOR & 0xffff); /* be sure to subtract the actual timeout since the new might not have been set and reloaded yet */
}
- if (wt_remaining>0xffff) {
+ if (wt_remaining > 0xffff) {
sniff_usart.base->US_RTOR = 0xffff;
} else {
sniff_usart.base->US_RTOR = wt_remaining;
@@ -807,17 +807,17 @@
static void Sniffer_reset_isr(const Pin* pPin)
{
/* Ensure an edge on the reset pin cause the interrupt */
- if (pPin->id!=pin_rst.id || 0==(pPin->mask&pin_rst.mask)) {
+ if (pPin->id != pin_rst.id || 0 == (pPin->mask & pin_rst.mask)) {
TRACE_ERROR("Pin other than reset caused a interrupt\n\r");
return;
}
/* Update the ISO state according to the reset change */
if (PIO_Get(&pin_rst)) {
- if (ISO7816_S_WAIT_ATR!=iso_state) {
+ if (ISO7816_S_WAIT_ATR != iso_state) {
change_state(ISO7816_S_WAIT_ATR);
}
} else {
- if (ISO7816_S_RESET!=iso_state) {
+ if (ISO7816_S_RESET != iso_state) {
change_state(ISO7816_S_RESET);
}
}
@@ -829,14 +829,14 @@
void Sniffer_usart1_irq(void)
{
- if (ID_USART1==sniff_usart.id) {
+ if (ID_USART1 == sniff_usart.id) {
Sniffer_usart_isr();
}
}
void Sniffer_usart0_irq(void)
{
- if (ID_USART0==sniff_usart.id) {
+ if (ID_USART0 == sniff_usart.id) {
Sniffer_usart_isr();
}
}
@@ -894,14 +894,14 @@
/* Enable interrupt to indicate when data has been received or timeout occurred */
USART_EnableIt(sniff_usart.base, US_IER_RXRDY | US_IER_TIMEOUT);
/* Set USB priority lower than USART to not miss sniffing data (both at 0 per default) */
- if (NVIC_GetPriority(IRQ_USART_SIM)>=NVIC_GetPriority(UDP_IRQn)) {
- NVIC_SetPriority(UDP_IRQn, NVIC_GetPriority(IRQ_USART_SIM)+2);
+ if (NVIC_GetPriority(IRQ_USART_SIM) >= NVIC_GetPriority(UDP_IRQn)) {
+ NVIC_SetPriority(UDP_IRQn, NVIC_GetPriority(IRQ_USART_SIM) + 2);
}
/* Enable interrupt requests for the USART peripheral */
NVIC_EnableIRQ(IRQ_USART_SIM);
/* Reset state */
- if (ISO7816_S_RESET!=iso_state) {
+ if (ISO7816_S_RESET != iso_state) {
change_state(ISO7816_S_RESET);
}
}
@@ -912,11 +912,11 @@
static void usb_send_change(uint32_t flags)
{
/* Check flags */
- if(0==flags) { /* no changes */
+ if(0 == flags) { /* no changes */
return;
}
- if (flags&SNIFF_CHANGE_FLAG_TIMEOUT_WT) {
+ if (flags & SNIFF_CHANGE_FLAG_TIMEOUT_WT) {
printf("waiting time (WT) timeout\n\r");
}
@@ -963,8 +963,8 @@
break;
case ISO7816_S_WAIT_TPDU: /* After the ATR we expect TPDU or PPS data */
case ISO7816_S_WAIT_PPS_RSP:
- if (byte == 0xff) {
- if (ISO7816_S_WAIT_PPS_RSP==iso_state) {
+ if (0xff == byte) {
+ if (ISO7816_S_WAIT_PPS_RSP == iso_state) {
change_state(ISO7816_S_IN_PPS_RSP); /* Go to PPS state */
} else {
change_state(ISO7816_S_IN_PPS_REQ); /* Go to PPS state */
@@ -973,7 +973,7 @@
break;
}
case ISO7816_S_IN_TPDU: /* More TPDU data incoming */
- if (ISO7816_S_WAIT_TPDU==iso_state) {
+ if (ISO7816_S_WAIT_TPDU == iso_state) {
change_state(ISO7816_S_IN_TPDU);
}
process_byte_tpdu(byte);
@@ -989,7 +989,7 @@
/* Handle flags */
if (change_flags) { /* WARNING this is not synced with the data buffer handling */
- if (change_flags&SNIFF_CHANGE_FLAG_TIMEOUT_WT) {
+ if (change_flags & SNIFF_CHANGE_FLAG_TIMEOUT_WT) {
/* Use timeout to detect interrupted data transmission */
switch (iso_state) {
case ISO7816_S_IN_ATR: