commit | 389a4040d5772407085a5fac6ada6dbf33dd94c6 | [log] [tgz] |
---|---|---|
author | Kévin Redon <kredon@sysmocom.de> | Mon Nov 18 20:23:20 2019 +0100 |
committer | Kévin Redon <kredon@sysmocom.de> | Mon Nov 18 20:26:59 2019 +0100 |
tree | 73df6cbc06f27122f88beb2eb309b77a51f7bce4 | |
parent | 5db9402a5f346e30288db228157f71c29aefce5a [diff] |
add DFU enter override capability in case flashing the main application firmware using DFU failed, the main application might be broken and not allow to switch again to DFU mode to re-flash it correctly. the other board have a way to force entering (e.g. staying in) the bootloader using an external signal (e.g. a switch on the SIMtrace board). the OWHW DFU firmware did not have this functionality implemented. the design (e.g. schematic) already has the SIMTRACE_BOOTLOADER signal (on PA31) for this purpose. now the DFU bootloader will start the DFU mode when the SIMTRACE_BOOTLOADER is high. this change has been tested on OWHWv2. Change-Id: Iefff51a811ad0f3bf3a46b8e256b905d11344bea
This is the repository for the next-generation SIMtrace devices, providing abilities to trace the communication between (U)SIM card and phone, remote (U)SIM card forward, (U)SIM man-in-the-middle, and more.
This is under heavy development, and right now it is not surprising if things still break on a daily basis.
NOTE: Nothing in this repository applies to the SIMtrace v1.x hardware or its associated firmware. SIMtrace v1.x is based on a different CPU / microcontroller architecture and uses a completely different software stack and host software.
At this point, the primary development target is still the OWHW + sysmoQMOD device, but we expect to add support for a SAM3 based SIMtrace hardware board soon.
The goal is to support the following devices:
This repository contains several directory