python3 conversion: fix tabs and spaces inconsistency
Without that fix we have:
$ python3 pySim-read.py
File "pySim-read.py", line 135
try:
^
TabError: inconsistent use of tabs and spaces in indentation
The following command was used to do the conversion:
sed 's# #\t#g' -i $(find -name "*.py")
Then the remaining spaces spotted during the review were
addressed manually.
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org>
Change-Id: I83f76a8e9b6e36098f16552a0135a8c22dde545f
diff --git a/pySim/cards.py b/pySim/cards.py
index cda337a..41723c4 100644
--- a/pySim/cards.py
+++ b/pySim/cards.py
@@ -85,11 +85,11 @@
def update_oplmn_act(self, mcc, mnc, access_tech='FFFF'):
"""
- See note in update_hplmn_act()
+ See note in update_hplmn_act()
"""
# get size and write EF.OPLMNwAcT
- data = self._scc.read_binary(EF['OPLMNwAcT'], length=None, offset=0)
- size = len(data[0])/2
+ data = self._scc.read_binary(EF['OPLMNwAcT'], length=None, offset=0)
+ size = len(data[0])/2
hplmn = enc_plmn(mcc, mnc)
content = hplmn + access_tech
data, sw = self._scc.update_binary(EF['OPLMNwAcT'], content + 'ffffff0000' * (size/5-1))
@@ -97,19 +97,19 @@
def update_plmn_act(self, mcc, mnc, access_tech='FFFF'):
"""
- See note in update_hplmn_act()
+ See note in update_hplmn_act()
"""
# get size and write EF.PLMNwAcT
- data = self._scc.read_binary(EF['PLMNwAcT'], length=None, offset=0)
- size = len(data[0])/2
+ data = self._scc.read_binary(EF['PLMNwAcT'], length=None, offset=0)
+ size = len(data[0])/2
hplmn = enc_plmn(mcc, mnc)
content = hplmn + access_tech
data, sw = self._scc.update_binary(EF['PLMNwAcT'], content + 'ffffff0000' * (size/5-1))
return sw
- def update_plmnsel(self, mcc, mnc):
- data = self._scc.read_binary(EF['PLMNsel'], length=None, offset=0)
- size = len(data[0])/2
+ def update_plmnsel(self, mcc, mnc):
+ data = self._scc.read_binary(EF['PLMNsel'], length=None, offset=0)
+ size = len(data[0])/2
hplmn = enc_plmn(mcc, mnc)
data, sw = self._scc.update_binary(EF['PLMNsel'], hplmn + 'ff' * (size-3))
return sw
@@ -119,16 +119,16 @@
return sw
def update_ad(self, mnc):
- #See also: 3GPP TS 31.102, chapter 4.2.18
- mnclen = len(str(mnc))
- if mnclen == 1:
- mnclen = 2
- if mnclen > 3:
+ #See also: 3GPP TS 31.102, chapter 4.2.18
+ mnclen = len(str(mnc))
+ if mnclen == 1:
+ mnclen = 2
+ if mnclen > 3:
raise RuntimeError('unable to calculate proper mnclen')
- data = self._scc.read_binary(EF['AD'], length=None, offset=0)
- size = len(data[0])/2
- content = data[0][0:6] + "%02X" % mnclen
+ data = self._scc.read_binary(EF['AD'], length=None, offset=0)
+ size = len(data[0])/2
+ content = data[0][0:6] + "%02X" % mnclen
data, sw = self._scc.update_binary(EF['AD'], content)
return sw
@@ -394,7 +394,7 @@
data, sw = self._scc.update_binary('6f78', lpad(p['acc'], 4))
# EF.SMSP
- if p.get('smsp'):
+ if p.get('smsp'):
r = self._scc.select_file(['3f00', '7f10', '6f42'])
data, sw = self._scc.update_record('6f42', 1, lpad(p['smsp'], 80))
@@ -426,7 +426,7 @@
"""
name = 'sysmosim-gr1'
- @classmethod
+ @classmethod
def autodetect(kls, scc):
try:
# Look for ATR
@@ -536,7 +536,7 @@
r = self._scc.select_file(['3f00', '7f10'])
# write EF.SMSP
- if p.get('smsp'):
+ if p.get('smsp'):
data, sw = self._scc.update_record('6f42', 1, lpad(p['smsp'], 80))
def erase(self):
@@ -592,25 +592,25 @@
data, sw = self._scc.update_binary('6f07', enc_imsi(p['imsi']))
# EF.PLMNsel
- if p.get('mcc') and p.get('mnc'):
- sw = self.update_plmnsel(p['mcc'], p['mnc'])
- if sw != '9000':
+ if p.get('mcc') and p.get('mnc'):
+ sw = self.update_plmnsel(p['mcc'], p['mnc'])
+ if sw != '9000':
print("Programming PLMNsel failed with code %s"%sw)
- # EF.PLMNwAcT
- if p.get('mcc') and p.get('mnc'):
+ # EF.PLMNwAcT
+ if p.get('mcc') and p.get('mnc'):
sw = self.update_plmn_act(p['mcc'], p['mnc'])
if sw != '9000':
print("Programming PLMNwAcT failed with code %s"%sw)
- # EF.OPLMNwAcT
- if p.get('mcc') and p.get('mnc'):
+ # EF.OPLMNwAcT
+ if p.get('mcc') and p.get('mnc'):
sw = self.update_oplmn_act(p['mcc'], p['mnc'])
if sw != '9000':
print("Programming OPLMNwAcT failed with code %s"%sw)
- # EF.AD
- if p.get('mcc') and p.get('mnc'):
+ # EF.AD
+ if p.get('mcc') and p.get('mnc'):
sw = self.update_ad(p['mnc'])
if sw != '9000':
print("Programming AD failed with code %s"%sw)
@@ -848,28 +848,28 @@
if sw != '9000':
raise RuntimeError('Failed to authenticate with ADM key %s'%(p['pin_adm'],))
- # EF.ICCID
- # TODO: Add programming of the ICCID
- if p.get('iccid'):
+ # EF.ICCID
+ # TODO: Add programming of the ICCID
+ if p.get('iccid'):
print("Warning: Programming of the ICCID is not implemented for this type of card.")
- # KI (Presumably a propritary file)
- # TODO: Add programming of KI
- if p.get('ki'):
+ # KI (Presumably a propritary file)
+ # TODO: Add programming of KI
+ if p.get('ki'):
print("Warning: Programming of the KI is not implemented for this type of card.")
- # OPc (Presumably a propritary file)
- # TODO: Add programming of OPc
- if p.get('opc'):
+ # OPc (Presumably a propritary file)
+ # TODO: Add programming of OPc
+ if p.get('opc'):
print("Warning: Programming of the OPc is not implemented for this type of card.")
- # EF.SMSP
+ # EF.SMSP
if p.get('smsp'):
sw = self.update_smsp(p['smsp'])
if sw != '9000':
print("Programming SMSP failed with code %s"%sw)
- # EF.IMSI
+ # EF.IMSI
if p.get('imsi'):
sw = self.update_imsi(p['imsi'])
if sw != '9000':
@@ -882,30 +882,30 @@
print("Programming ACC failed with code %s"%sw)
# EF.PLMNsel
- if p.get('mcc') and p.get('mnc'):
- sw = self.update_plmnsel(p['mcc'], p['mnc'])
- if sw != '9000':
+ if p.get('mcc') and p.get('mnc'):
+ sw = self.update_plmnsel(p['mcc'], p['mnc'])
+ if sw != '9000':
print("Programming PLMNsel failed with code %s"%sw)
- # EF.PLMNwAcT
- if p.get('mcc') and p.get('mnc'):
+ # EF.PLMNwAcT
+ if p.get('mcc') and p.get('mnc'):
sw = self.update_plmn_act(p['mcc'], p['mnc'])
if sw != '9000':
print("Programming PLMNwAcT failed with code %s"%sw)
- # EF.OPLMNwAcT
- if p.get('mcc') and p.get('mnc'):
+ # EF.OPLMNwAcT
+ if p.get('mcc') and p.get('mnc'):
sw = self.update_oplmn_act(p['mcc'], p['mnc'])
if sw != '9000':
print("Programming OPLMNwAcT failed with code %s"%sw)
- # EF.AD
- if p.get('mcc') and p.get('mnc'):
+ # EF.AD
+ if p.get('mcc') and p.get('mnc'):
sw = self.update_ad(p['mnc'])
if sw != '9000':
print("Programming AD failed with code %s"%sw)
- return None
+ return None
def erase(self):
return