bsc: add config files for sccplite BSC tests
Helps running sccplite tests locally.
Config files adapted from docker-playground/ttcn3-bsc-test/sccplite/
Change-Id: Ia92b4a7fda2195ce6e6aaf0bccd808df40057896
diff --git a/bsc/osmo-bsc-sccplite.cfg b/bsc/osmo-bsc-sccplite.cfg
new file mode 100644
index 0000000..a11bfdc
--- /dev/null
+++ b/bsc/osmo-bsc-sccplite.cfg
@@ -0,0 +1,363 @@
+!
+! OsmoBSC (1.0.1.122-630df) configuration saved from vty
+!!
+password foo
+!
+stats interval 0
+stats reporter statsd
+ prefix TTCN3
+ level subscriber
+ remote-ip 127.0.0.1
+ remote-port 8125
+ flush-period 1
+ mtu 1024
+ enable
+!
+line vty
+ no login
+ bind 127.0.0.1
+!
+e1_input
+ e1_line 0 driver ipa
+ e1_line 0 port 0
+ no e1_line 0 keepalive
+cs7 instance 0
+ point-code 0.23.3
+ asp asp-clnt-msc-0 5000 0 ipa
+ remote-ip 127.0.0.1
+ as as-clnt-msc-0 ipa
+ asp asp-clnt-msc-0
+ routing-key 0 0.23.3
+ point-code override dpc 0.23.1
+network
+ network country code 1
+ mobile network code 1
+ encryption a5 0 1 3
+ neci 1
+ paging any use tch 0
+ handover 1
+ handover window rxlev averaging 10
+ handover window rxqual averaging 1
+ handover window rxlev neighbor averaging 10
+ handover power budget interval 6
+ handover power budget hysteresis 3
+ handover maximum distance 9999
+ timer t3113 10
+ timer t3212 30
+ bts 0
+ type osmo-bts
+ band DCS1800
+ cell_identity 0
+ location_area_code 1
+ dtx uplink force
+ dtx downlink
+ base_station_id_code 10
+ ms max power 15
+ cell reselection hysteresis 4
+ rxlev access min 0
+ radio-link-timeout 32
+ channel allocator ascending
+ rach tx integer 9
+ rach max transmission 7
+ channel-descrption attach 1
+ channel-descrption bs-pa-mfrms 5
+ channel-descrption bs-ag-blks-res 1
+ early-classmark-sending forbidden
+ ip.access unit_id 1234 0
+ oml ip.access stream_id 255 line 0
+ neighbor-list mode manual-si5
+ neighbor-list add arfcn 100
+ neighbor-list add arfcn 200
+ si5 neighbor-list add arfcn 10
+ si5 neighbor-list add arfcn 20
+ codec-support fr hr efr amr
+ gprs mode gprs
+ gprs routing area 0
+ gprs network-control-order nc0
+ gprs cell bvci 1234
+ gprs cell timer blocking-timer 3
+ gprs cell timer blocking-retries 3
+ gprs cell timer unblocking-retries 3
+ gprs cell timer reset-timer 3
+ gprs cell timer reset-retries 3
+ gprs cell timer suspend-timer 10
+ gprs cell timer suspend-retries 3
+ gprs cell timer resume-timer 10
+ gprs cell timer resume-retries 3
+ gprs cell timer capability-update-timer 10
+ gprs cell timer capability-update-retries 3
+ gprs nsei 1234
+ gprs ns timer tns-block 3
+ gprs ns timer tns-block-retries 3
+ gprs ns timer tns-reset 3
+ gprs ns timer tns-reset-retries 3
+ gprs ns timer tns-test 30
+ gprs ns timer tns-alive 3
+ gprs ns timer tns-alive-retries 10
+ gprs nsvc 0 nsvci 1234
+ gprs nsvc 0 local udp port 23000
+ gprs nsvc 0 remote udp port 23000
+ gprs nsvc 0 remote ip 192.168.100.239
+ gprs nsvc 1 nsvci 0
+ gprs nsvc 1 local udp port 0
+ gprs nsvc 1 remote udp port 0
+ gprs nsvc 1 remote ip 0.0.0.0
+ no force-combined-si
+ si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3
+ trx 0
+ rf_locked 0
+ arfcn 871
+ nominal power 23
+ max_power_red 20
+ rsl e1 tei 0
+ timeslot 0
+ phys_chan_config CCCH+SDCCH4+CBCH
+ hopping enabled 0
+ timeslot 1
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 2
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 3
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 4
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 5
+ phys_chan_config TCH/H
+ hopping enabled 0
+ timeslot 6
+ phys_chan_config PDCH
+ hopping enabled 0
+ timeslot 7
+ phys_chan_config PDCH
+ hopping enabled 0
+ bts 1
+ type osmo-bts
+ band DCS1800
+ cell_identity 1
+ location_area_code 1
+ dtx uplink force
+ dtx downlink
+ base_station_id_code 11
+ ms max power 15
+ cell reselection hysteresis 4
+ rxlev access min 0
+ radio-link-timeout 32
+ channel allocator ascending
+ rach tx integer 9
+ rach max transmission 7
+ channel-descrption attach 1
+ channel-descrption bs-pa-mfrms 5
+ channel-descrption bs-ag-blks-res 1
+ early-classmark-sending forbidden
+ ip.access unit_id 1235 0
+ oml ip.access stream_id 255 line 0
+ neighbor-list mode manual-si5
+ neighbor-list add arfcn 100
+ neighbor-list add arfcn 200
+ si5 neighbor-list add arfcn 10
+ si5 neighbor-list add arfcn 20
+ codec-support fr hr efr amr
+ gprs mode gprs
+ gprs routing area 0
+ gprs network-control-order nc0
+ gprs cell bvci 1235
+ gprs cell timer blocking-timer 3
+ gprs cell timer blocking-retries 3
+ gprs cell timer unblocking-retries 3
+ gprs cell timer reset-timer 3
+ gprs cell timer reset-retries 3
+ gprs cell timer suspend-timer 10
+ gprs cell timer suspend-retries 3
+ gprs cell timer resume-timer 10
+ gprs cell timer resume-retries 3
+ gprs cell timer capability-update-timer 10
+ gprs cell timer capability-update-retries 3
+ gprs nsei 1235
+ gprs ns timer tns-block 3
+ gprs ns timer tns-block-retries 3
+ gprs ns timer tns-reset 3
+ gprs ns timer tns-reset-retries 3
+ gprs ns timer tns-test 30
+ gprs ns timer tns-alive 3
+ gprs ns timer tns-alive-retries 10
+ gprs nsvc 0 nsvci 1235
+ gprs nsvc 0 local udp port 23000
+ gprs nsvc 0 remote udp port 23000
+ gprs nsvc 0 remote ip 192.168.100.239
+ gprs nsvc 1 nsvci 0
+ gprs nsvc 1 local udp port 0
+ gprs nsvc 1 remote udp port 0
+ gprs nsvc 1 remote ip 0.0.0.0
+ no force-combined-si
+ si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3
+ trx 0
+ rf_locked 0
+ arfcn 871
+ nominal power 23
+ max_power_red 20
+ rsl e1 tei 0
+ timeslot 0
+ phys_chan_config CCCH+SDCCH4+CBCH
+ hopping enabled 0
+ timeslot 1
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 2
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 3
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 4
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 5
+ phys_chan_config TCH/H
+ hopping enabled 0
+ timeslot 6
+ phys_chan_config PDCH
+ hopping enabled 0
+ timeslot 7
+ phys_chan_config PDCH
+ hopping enabled 0
+ bts 2
+ type osmo-bts
+ band DCS1800
+ cell_identity 1
+ location_area_code 2
+ dtx uplink force
+ dtx downlink
+ base_station_id_code 12
+ ms max power 15
+ cell reselection hysteresis 4
+ rxlev access min 0
+ radio-link-timeout 32
+ channel allocator ascending
+ rach tx integer 9
+ rach max transmission 7
+ channel-descrption attach 1
+ channel-descrption bs-pa-mfrms 5
+ channel-descrption bs-ag-blks-res 1
+ early-classmark-sending forbidden
+ ip.access unit_id 1236 0
+ oml ip.access stream_id 255 line 0
+ neighbor-list mode manual-si5
+ neighbor-list add arfcn 100
+ neighbor-list add arfcn 200
+ si5 neighbor-list add arfcn 10
+ si5 neighbor-list add arfcn 20
+ codec-support fr hr efr amr
+ gprs mode gprs
+ gprs routing area 0
+ gprs network-control-order nc0
+ gprs cell bvci 1236
+ gprs cell timer blocking-timer 3
+ gprs cell timer blocking-retries 3
+ gprs cell timer unblocking-retries 3
+ gprs cell timer reset-timer 3
+ gprs cell timer reset-retries 3
+ gprs cell timer suspend-timer 10
+ gprs cell timer suspend-retries 3
+ gprs cell timer resume-timer 10
+ gprs cell timer resume-retries 3
+ gprs cell timer capability-update-timer 10
+ gprs cell timer capability-update-retries 3
+ gprs nsei 1236
+ gprs ns timer tns-block 3
+ gprs ns timer tns-block-retries 3
+ gprs ns timer tns-reset 3
+ gprs ns timer tns-reset-retries 3
+ gprs ns timer tns-test 30
+ gprs ns timer tns-alive 3
+ gprs ns timer tns-alive-retries 10
+ gprs nsvc 0 nsvci 1236
+ gprs nsvc 0 local udp port 23000
+ gprs nsvc 0 remote udp port 23000
+ gprs nsvc 0 remote ip 192.168.100.239
+ gprs nsvc 1 nsvci 0
+ gprs nsvc 1 local udp port 0
+ gprs nsvc 1 remote udp port 0
+ gprs nsvc 1 remote ip 0.0.0.0
+ no force-combined-si
+ si2quater neighbor-list add earfcn 111 thresh-hi 20 thresh-lo 10 prio 3 qrxlv 22 meas 3
+ trx 0
+ rf_locked 0
+ arfcn 871
+ nominal power 23
+ max_power_red 20
+ rsl e1 tei 0
+ timeslot 0
+ phys_chan_config CCCH+SDCCH4+CBCH
+ hopping enabled 0
+ timeslot 1
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 2
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 3
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 4
+ phys_chan_config TCH/F
+ hopping enabled 0
+ timeslot 5
+ phys_chan_config TCH/H
+ hopping enabled 0
+ timeslot 6
+ phys_chan_config PDCH
+ hopping enabled 0
+ timeslot 7
+ phys_chan_config PDCH
+ hopping enabled 0
+ bts 3
+ type osmo-bts
+ band DCS1800
+ cell_identity 3
+ location_area_code 3
+ # re-use bts 2's ARFCN 871 and BSIC 12 (to test handover config)
+ base_station_id_code 12
+ trx 0
+ rf_locked 0
+ arfcn 871
+ nominal power 23
+ max_power_red 20
+ rsl e1 tei 0
+ timeslot 0
+ phys_chan_config CCCH+SDCCH4
+ timeslot 1
+ phys_chan_config TCH/F
+ timeslot 2
+ phys_chan_config TCH/F
+ timeslot 3
+ phys_chan_config TCH/F
+ timeslot 4
+ phys_chan_config TCH/F
+ timeslot 5
+ phys_chan_config TCH/H
+ timeslot 6
+ phys_chan_config PDCH
+ timeslot 7
+ phys_chan_config PDCH
+msc 0
+ allow-emergency allow
+ amr-config 12_2k forbidden
+ amr-config 10_2k forbidden
+ amr-config 7_95k forbidden
+ amr-config 7_40k forbidden
+ amr-config 6_70k forbidden
+ amr-config 5_90k allowed
+ amr-config 5_15k forbidden
+ amr-config 4_75k forbidden
+ codec-list fr1 fr2 fr3 hr1 hr3
+ mgw remote-ip 127.0.0.1
+ asp-protocol ipa
+bsc
+ mid-call-timeout 0
+ no missing-msc-text
+ctrl
+ bind 127.0.0.1