BTS_Tests: cosmetic: s/f_init_pcu_test/f_init_with_pcuif/
Change-Id: Ic95c46426ed3ac9ead645037059190fead181b31
diff --git a/bts/BTS_Tests.ttcn b/bts/BTS_Tests.ttcn
index a18777a..005b1d7 100644
--- a/bts/BTS_Tests.ttcn
+++ b/bts/BTS_Tests.ttcn
@@ -4624,42 +4624,42 @@
}
}
-friend function f_init_pcu_test() runs on test_CT {
+friend function f_init_with_pcuif() runs on test_CT {
f_init();
PCU.send(t_SD_PCUIF(g_pcu_conn_id, ts_PCUIF_TXT_IND(0, PCU_VERSION, testcasename())));
}
/* PDCH activation via PCU socket; check for presence of RTS.req */
testcase TC_pcu_act_req() runs on test_CT {
- f_init_pcu_test();
+ f_init_with_pcuif();
f_TC_pcu_act_req(0, 0, 7, true);
}
/* PDCH activation via PCU socket on non-PDCU timeslot */
testcase TC_pcu_act_req_wrong_ts() runs on test_CT {
- f_init_pcu_test();
+ f_init_with_pcuif();
f_TC_pcu_act_req(0, 0, 1, false);
}
/* PDCH activation via PCU socket on wrong BTS */
testcase TC_pcu_act_req_wrong_bts() runs on test_CT {
- f_init_pcu_test();
+ f_init_with_pcuif();
f_TC_pcu_act_req(23, 0, 7, false);
}
/* PDCH activation via PCU socket on wrong TRX */
testcase TC_pcu_act_req_wrong_trx() runs on test_CT {
- f_init_pcu_test();
+ f_init_with_pcuif();
f_TC_pcu_act_req(0, 23, 7, false);
}
/* PDCH deactivation via PCU socket; check for absence of RTS.req */
testcase TC_pcu_deact_req() runs on test_CT {
- f_init_pcu_test();
+ f_init_with_pcuif();
/* Activate PDCH */
f_TC_pcu_act_req(0, 0, 7, true);
@@ -4670,7 +4670,7 @@
/* Attempt to deactivate a PDCH on a non-PDCH timeslot */
testcase TC_pcu_deact_req_wrong_ts() runs on test_CT {
- f_init_pcu_test();
+ f_init_with_pcuif();
f_TC_pcu_deact_req(0, 0, 1);
}
@@ -4679,7 +4679,7 @@
function f_TC_pcu_ver_siXX(octetstring si, RSL_IE_SysinfoType rsl_si_type) runs on test_CT {
var PCUIF_send_data sd;
timer T:= 3.0;
- f_init_pcu_test();
+ f_init_with_pcuif();
/* Set SI13 via RSL */
f_rsl_bcch_fill_raw(rsl_si_type, si);
@@ -4852,7 +4852,7 @@
* support dynamic timeslots? But it uses the same scheduler as osmo-bts-trx ?!? */
f_vty_config2(BSCVTY, {"network", "bts 0", "trx 0", "timeslot 3"}, "phys_chan_config TCH/F");
f_vty_config2(BSCVTY, {"network", "bts 0", "trx 0", "timeslot 4"}, "phys_chan_config TCH/F");
- f_init_pcu_test();
+ f_init_with_pcuif();
}
private function f_virtphy_common() runs on test_CT {
@@ -4926,7 +4926,7 @@
var octetstring data;
timer T;
- f_init_pcu_test();
+ f_init_with_pcuif();
f_init_l1ctl();
f_l1_tune(L1CTL);
@@ -4982,7 +4982,7 @@
/* Send AGCH from PCU; check it appears on Um side */
testcase TC_pcu_data_req_agch() runs on test_CT {
timer T := 3.0;
- f_init_pcu_test();
+ f_init_with_pcuif();
f_init_l1ctl();
f_l1_tune(L1CTL);
@@ -5004,7 +5004,7 @@
/* Send AGCH from PCU; check it appears on Um side */
testcase TC_pcu_data_req_pch() runs on test_CT {
timer T := 3.0;
- f_init_pcu_test();
+ f_init_with_pcuif();
f_init_l1ctl();
f_l1_tune(L1CTL);
@@ -5027,7 +5027,7 @@
/* Send IMM.ASS from PCU for PCH; check it appears on Um side */
testcase TC_pcu_data_req_imm_ass_pch() runs on test_CT {
var octetstring imm_ass := f_rnd_octstring(23);
- f_init_pcu_test();
+ f_init_with_pcuif();
f_init_l1ctl();
f_l1_tune(L1CTL);
@@ -5050,7 +5050,7 @@
/* Send RACH from Um side, expect it to show up on PCU socket */
testcase TC_pcu_rach_content() runs on test_CT {
- f_init_pcu_test();
+ f_init_with_pcuif();
f_init_l1ctl();
f_l1_tune(L1CTL);
@@ -5091,7 +5091,7 @@
var GsmFrameNumber fn;
var BIT11 ra11;
- f_init_pcu_test();
+ f_init_with_pcuif();
f_init_l1ctl();
f_l1_tune(L1CTL);
@@ -5188,7 +5188,7 @@
/* Verify C/I (Carrier-to-Interference ratio) processing of PDTCH frames */
testcase TC_pcu_data_ind_lqual_cb() runs on test_CT {
- f_init_pcu_test();
+ f_init_with_pcuif();
PCU.clear;
f_init_l1ctl();
@@ -5217,7 +5217,7 @@
/* Send PAGING via RSL, expect it to shw up on PCU socket */
testcase TC_pcu_paging_from_rsl() runs on test_CT {
- f_init_pcu_test();
+ f_init_with_pcuif();
for (var integer i := 0; i < 100; i := i+1) {
var MobileIdentityLV mi_lv;
@@ -5262,7 +5262,7 @@
var float test_duration := 5.0;
timer T;
- f_init_pcu_test();
+ f_init_with_pcuif();
f_TC_pcu_act_req(0, 0, 7, true);
PCU.clear;
@@ -5316,7 +5316,7 @@
var float test_duration := 5.0;
timer T;
- f_init_pcu_test();
+ f_init_with_pcuif();
f_TC_pcu_act_req(0, 0, 7, true);
PCU.clear;
@@ -5388,7 +5388,7 @@
var float test_duration := 5.0;
timer T;
- f_init_pcu_test();
+ f_init_with_pcuif();
f_TC_pcu_act_req(0, 0, 7, true);
/* re-connect CTRL port from BTS to BSC */
@@ -5775,7 +5775,7 @@
f_vty_config2(BSCVTY, {"network", "bts 0"} , "gprs nsvc 1 remote ip fd00::ca:ff:ee");
f_vty_config2(BSCVTY, {"network", "bts 0"} , "gprs nsvc 1 remote udp port 5678");
- f_init_pcu_test();
+ f_init_with_pcuif();
var PCUIF_info_ind info_ind := g_pcu_last_info.u.info_ind;
var PCUIF_RemoteAddr remote_addr := info_ind.remote_addr;