Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
osmo-trx
/
e51a8f029e1f691ee3c33d893e8b45a94e5d7bae
/
Transceiver52M
/
UHDDevice.cpp
a93f789
uhd: Increase MC-BTS FPGA clock rate to 51.2 MHz
by Tom Tsou
· 8 years ago
72bf762
uhd: Add support for UHD-3.11 logging control
by Tom Tsou
· 8 years ago
80cb080
Revert "uhd: Set minimum supported version to 3.9.0"
by Tom Tsou
· 8 years ago
44c7f41
uhd: Add X300 sample timing for 4 SPS
by Tom Tsou
· 8 years ago
93ca09e
uhd: Set minimum supported version to 3.9.0
by Tom Tsou
· 8 years ago
43242ef
uhd: Add missing B200 sample timing for 4 SPS receive
by Tom Tsou
· 8 years ago
8f0ccf6
uhd: Update USRP2/N200/N210 for 4 SPS Rx
by Tom Tsou
· 8 years ago
2f3e60b
uhd: Add command line option for GPS reference
by Tom Tsou
· 8 years ago
cbfef6e
UHD: Initial LimeSDR support.
by Alexander Chemeris
· 9 years ago
7676427
mcbts: Add multi-ARFCN radio support
by Tom Tsou
· 8 years ago
05c6feb
radioInterface: Convert diversity argument to general type
by Tom Tsou
· 8 years ago
2e4ed10
transceiver: Add Rx samples-per-symbol option
by Tom Tsou
· 8 years ago
1ba69e7
uhd: Fix comment.
by Alexander Chemeris
· 8 years ago
3b093bb
uhd: Set minimum UHD version requirement for E3XX
by Tom Tsou
· 8 years ago
3f4a13f
uhd: Make device offset check a private method
by Tom Tsou
· 8 years ago
a5e0f1c
uhd: Update default E3XX settings
by Tom Tsou
· 8 years ago
d2b0703
uhd: Correct timing alignment in 8-PSK and GMSK downlink bursts
by Tom Tsou
· 8 years ago
9bd649e
EDGE: Fix USRP B210 device support
by Tom Tsou
· 9 years ago
871b878
EDGE: Add support for UmTRX.
by Alexander Chemeris
· 9 years ago
5cd70dc
EDGE: Setup variable sampling on receive path
by Tom Tsou
· 9 years ago
283b22d
uhd: Remove references to USRP B205
by Tom Tsou
· 9 years ago
d4d3daa
uhd: Use internal UHD tick conversions
by Tom Tsou
· 9 years ago
c312905
uhd: Add version 3.9.0 support
by Tom Tsou
· 9 years ago
c4eab87
uhd: Output Rx/Tx gain limits to log to make it more transparent.
by Alexander Chemeris
· 9 years ago
f3b9af6
uhd: Fix UmTRX tuning broken in commit 90f7a01d.
by Alexander Chemeris
· 9 years ago
c052aa1
uhd: Fix rounding error in timestamp conversion functions.
by Alexander Chemeris
· 9 years ago
50747dc
osmo-trx: Add an option to swap channels on UmTRX.
by Alexander Chemeris
· 9 years ago
5c7c178
uhd: Pass UHD command line arguments to constructor
by Tom Tsou
· 9 years ago
90f7a01
umtrx: Don't use DSP tuning, because LMS6002D PLL steps are small enough.
by Alexander Chemeris
· 10 years ago
e171425
uhd: Set RF frontend bandwidth for UmTRX to improve signal quality.
by Alexander Chemeris
· 9 years ago
4d029d8
UmTRX: Manually set Tx gain stages for the best signal quality.
by Alexander Chemeris
· 10 years ago
88bbf1a
uhd: Use full DAC scale with UmTRX to improve signal quality.
by Alexander Chemeris
· 10 years ago
93b7f37
b210: Lock dual-channel tuning access
by Tom Tsou
· 10 years ago
4ad9ea6
Transceiver52M: Add X300/X310 and E310 USRP support
by Tom Tsou
· 10 years ago
eb54bdd
Transceiver52M: Implement POWEROFF command
by Tom Tsou
· 10 years ago
1ae2556
uhd: Display current timestamp with buffer status errors
by Tom Tsou
· 10 years ago
a5c83ae
Transceiver52M: Add E1XX USRP device id and timings
by Thomas Tsou
· 11 years ago
c283916
Transceiver52M: Allow startup delay for stream alignment
by Thomas Tsou
· 11 years ago
cecfb2e
Transceiver52M: Set UHD rates before creating streamers
by Thomas Tsou
· 11 years ago
8e17df7
Transceivert52M: Add option for baseband frequency offset
by Thomas Tsou
· 11 years ago
3ebc772
Transceiver52M: Enable B210 dual channel support
by Thomas Tsou
· 11 years ago
18d3b83
Transceiver52M: Disable initial device time reset
by Thomas Tsou
· 11 years ago
e788239
Transceiver52M: Split B200 and B210 identifiers
by Thomas Tsou
· 11 years ago
635f1bf
Transceiver52M: Set B2XX clock frequency to 26 MHz
by Thomas Tsou
· 11 years ago
2c79110
Transceiver52M: UHD: Check running status before stopping stream
by Thomas Tsou
· 11 years ago
2e622ff
Transceiver52M: Output device and operating mode to stdout
by Thomas Tsou
· 11 years ago
3f32ab5
Transceiver52M: Enable all warnings and resolve
by Thomas Tsou
· 11 years ago
e90a42b
Transceiver52M: Add dual channel diversity receiver option
by Thomas Tsou
· 11 years ago
2c1f85a
Transceiver52M: UHD: Add string descriptors to device-offset pairs
by Thomas Tsou
· 11 years ago
f8bc7c3
Transceiver52M: UHD: Continue on receive and send timeouts
by Thomas Tsou
· 11 years ago
acc22fa
Transceiver52M: Use USRP1 type window for B2xx devices
by Thomas Tsou
· 11 years ago
7553aa9
Transceiver52M: Set variable thread priority levels
by Thomas Tsou
· 11 years ago
204a9f1
Transceiver52M: Add multi channel transceiver support
by Thomas Tsou
· 11 years ago
0169b31
Transceiver52M: Remove unnecessary UHD clock setting call
by Thomas Tsou
· 11 years ago
cf910dc
Transceiver52M: Reset overrun and underrun indicators
by Thomas Tsou
· 11 years ago
010fff7
Transceiver52M: Move reference select from compile time to database
by Thomas Tsou
· 11 years ago
61b4a6a
Transceiver52M: Delay UHD messaging registration until after start
by Thomas Tsou
· 11 years ago
fe269fe
Transceiver52M: Add 64 MHz resampling option with B100
by Thomas Tsou
· 11 years ago
69d14c9
Transceiver52M: Add B210 support
by Thomas Tsou
· 11 years ago
c1f7c42
Transceiver52M: Setup dual sample rate transceiver
by Thomas Tsou
· 11 years ago
092f757
Transceiver52M: Add B200 support
by Thomas Tsou
· 12 years ago
a57bc8a
Transceiver52M: Setup dual Laurent pulse shaping filter
by Thomas Tsou
· 11 years ago
84c60f6
Transceiver52M: Check that sample rates are sane before using
by Thomas Tsou
· 11 years ago
c88d8d5
Transceiver52M: Add UmTRX support
by Thomas Tsou
· 11 years ago
03e6ecf
Transceiver52M: Replace resampler with SSE enabled implementation
by Thomas Tsou
· 11 years ago
7e06806
Transceiver52M: Use exception blocks for rate changes
by Thomas Tsou
· 12 years ago
cb69f08
Transceiver52M: Set resampling option automatically based on device
by Thomas Tsou
· 12 years ago
f2293b8
Transceiver52M: Remove periodic alignment update from UHD build
by Thomas Tsou
· 12 years ago
e3e8814
Transceiver52M: Add device offset correction table
by Thomas Tsou
· 12 years ago
02d88d1
Transceiver52M: Add UHD device type checking
by Thomas Tsou
· 12 years ago
b4cb4e2
Transceiver52M: Update to UHD streamer interface
by Thomas Tsou
· 12 years ago
ec842de
Alexander's patches:
by kurtis.heimerl
· 12 years ago
f60dafa
Transceiver52M: UHD: Setup option to pass arguments from command line
by ttsou
· 12 years ago
60dc4c9
transceiver: uhd: prevent output of underrun message at ERROR level
by ttsou
· 12 years ago
221f23e
transceiver: uhd: allow underrun flag to reset during timing alignment
by ttsou
· 12 years ago
724eb36
transceiver, uhd: output timestamps on monontonic error
by ttsou
· 13 years ago
3b5c0c1
transceiver, uhd: fix build error due to log level
by ttsou
· 13 years ago
37720be
transceiver, uhd: display device information on make failure
by ttsou
· 13 years ago
b371ed5
transceiver, uhd: alert user on unrecoverable errors
by ttsou
· 13 years ago
856bbbe
Matching UHD changes in gnuradio
by kurtis.heimerl
· 13 years ago
e332032
transceiver52M: bump critial errors to ALERT level
by kurtis.heimerl
· 13 years ago
4403d4f
transceiver, uhd: exit informatively if no devices are found
by kurtis.heimerl
· 13 years ago
523ae5a
transceiver, uhd: reject usrp1 if compiled with uhd support
by kurtis.heimerl
· 13 years ago
ac0ee12
transceiver, uhd: runtime check for setting master clock rate
by kurtis.heimerl
· 13 years ago
e417c5a
transceiver: uhd: increase log level on constructor errors
by kurtis.heimerl
· 13 years ago
c6b9b70
transceiver: uhd: make external reference a compile time option
by kurtis.heimerl
· 13 years ago
4e59d66
transceiver: update to log messages to work with P2.8
by kurtis.heimerl
· 13 years ago
3998da7
transceiver: add a newline for uhd information outputs
by kurtis.heimerl
· 13 years ago
b7358ce
transceiver: reject usrp1 if detected using uhd
by kurtis.heimerl
· 13 years ago
e380af3
transceiver: make the transmit drive loop bus dependent
by kurtis.heimerl
· 13 years ago
0803ad9
transceiver: reroute uhd messages to logging facility
by kurtis.heimerl
· 13 years ago
ce31733
transceiver: add option for host based resampling
by kurtis.heimerl
· 13 years ago
513a629
uhd: keep reading on overrun or other non-fatal errors
by kurtis.heimerl
· 13 years ago
119ca9c
transceiver: uhd: update copyright header
by kurtis.heimerl
· 13 years ago
1979c6f
transceiver: minor cleanup of sample type sizing in uhd
by kurtis.heimerl
· 13 years ago
26ca5bc
uhd: remove external clock polarity setting
by kurtis.heimerl
· 13 years ago
d3e2590
uhd: verify setting of master clock rate
by kurtis.heimerl
· 13 years ago
2b28c69
uhd: remove uhd type argument
by kurtis.heimerl
· 13 years ago
495d3c8
uhd: flush receive buffer should return true on timeout
by kurtis.heimerl
· 13 years ago
6cb348b
uhd: log asynchronous errors as errors
by kurtis.heimerl
· 13 years ago
Next »