/*
* Copyright 2008 Free Software Foundation, Inc.
*
* This software is distributed under multiple licenses; see the COPYING file in the main directory for licensing information for this specific distribuion.
*
* This use of this software may be subject to additional restrictions.
* See the LEGAL file in the main directory for details.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

*/

#ifndef _USRP_DEVICE_H_
#define _USRP_DEVICE_H_

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include "radioDevice.h"

#ifdef HAVE_LIBUSRP_3_3 // [
#  include <usrp/usrp_standard.h>
#  include <usrp/usrp_bytesex.h>
#  include <usrp/usrp_prims.h>
#else // HAVE_LIBUSRP_3_3 ][
#  include "usrp_standard.h"
#  include "usrp_bytesex.h"
#  include "usrp_prims.h"
#endif // !HAVE_LIBUSRP_3_3 ]
#include <sys/time.h>
#include <math.h>
#include <string>
#include <iostream>


/** Define types which are not defined in libusrp-3.1 */
#ifndef HAVE_LIBUSRP_3_2
#include <boost/shared_ptr.hpp>
typedef boost::shared_ptr<usrp_standard_tx> usrp_standard_tx_sptr;
typedef boost::shared_ptr<usrp_standard_rx> usrp_standard_rx_sptr;
#endif // HAVE_LIBUSRP_3_2


/** A class to handle a USRP rev 4, with a two RFX900 daughterboards */
class USRPDevice: public RadioDevice {

private:

  static const double masterClockRate; ///< the USRP clock rate
  double desiredSampleRate; 	///< the desired sampling rate
  usrp_standard_rx_sptr m_uRx;	///< the USRP receiver
  usrp_standard_tx_sptr m_uTx;	///< the USRP transmitter

  db_base_sptr m_dbRx;          ///< rx daughterboard
  db_base_sptr m_dbTx;          ///< tx daughterboard
  usrp_subdev_spec rxSubdevSpec;
  usrp_subdev_spec txSubdevSpec;

  double actualSampleRate;	///< the actual USRP sampling rate
  unsigned int decimRate;	///< the USRP decimation rate

  unsigned long long samplesRead;	///< number of samples read from USRP
  unsigned long long samplesWritten;	///< number of samples sent to USRP

  bool started;			///< flag indicates USRP has started
  bool skipRx;			///< set if USRP is transmit-only.

  static const unsigned int currDataSize_log2 = 21;
  static const unsigned long currDataSize = (1 << currDataSize_log2);
  short *data;
  unsigned long dataStart;
  unsigned long dataEnd;
  TIMESTAMP timeStart;
  TIMESTAMP timeEnd;
  bool isAligned;

  Mutex writeLock;

  short *currData;		///< internal data buffer when reading from USRP
  TIMESTAMP currTimestamp;	///< timestamp of internal data buffer
  unsigned currLen;		///< size of internal data buffer

  TIMESTAMP timestampOffset;       ///< timestamp offset b/w Tx and Rx blocks
  TIMESTAMP latestWriteTimestamp;  ///< timestamp of most recent ping command
  TIMESTAMP pingTimestamp;	   ///< timestamp of most recent ping response
  static const TIMESTAMP PINGOFFSET = 272;  ///< undetermined delay b/w ping response timestamp and true receive timestamp
  unsigned long hi32Timestamp;
  unsigned long lastPktTimestamp;

  double rxGain;

#ifdef SWLOOPBACK 
  short loopbackBuffer[1000000];
  int loopbackBufferSize;
  double samplePeriod; 

  struct timeval startTime;
  struct timeval lastReadTime;
  bool   firstRead;
#endif

  /** Set the transmission frequency */
  bool tx_setFreq(double freq, double *actual_freq);

  /** Set the receiver frequency */
  bool rx_setFreq(double freq, double *actual_freq);
  
 public:

  /** Object constructor */
  USRPDevice (double _desiredSampleRate, bool skipRx);

  /** Instantiate the USRP */
  bool open(const std::string &);

  /** Start the USRP */
  bool start();

  /** Stop the USRP */
  bool stop();

  /** Set priority not supported */
  void setPriority() { return; }

  /** Only USB bus supported */
  busType getBus() { return USB; }

  /**
	Read samples from the USRP.
	@param buf preallocated buf to contain read result
	@param len number of samples desired
	@param overrun Set if read buffer has been overrun, e.g. data not being read fast enough
	@param timestamp The timestamp of the first samples to be read
	@param underrun Set if USRP does not have data to transmit, e.g. data not being sent fast enough
	@param RSSI The received signal strength of the read result
	@return The number of samples actually read
  */
  int  readSamples(short *buf, int len, bool *overrun, 
		   TIMESTAMP timestamp = 0xffffffff,
		   bool *underrun = NULL,
		   unsigned *RSSI = NULL);
  /**
        Write samples to the USRP.
        @param buf Contains the data to be written.
        @param len number of samples to write.
        @param underrun Set if USRP does not have data to transmit, e.g. data not being sent fast enough
        @param timestamp The timestamp of the first sample of the data buffer.
        @param isControl Set if data is a control packet, e.g. a ping command
        @return The number of samples actually written
  */
  int  writeSamples(short *buf, int len, bool *underrun, 
		    TIMESTAMP timestamp = 0xffffffff,
		    bool isControl = false);
 
  /** Update the alignment between the read and write timestamps */
  bool updateAlignment(TIMESTAMP timestamp);
  
  /** Set the transmitter frequency */
  bool setTxFreq(double wFreq);

  /** Set the receiver frequency */
  bool setRxFreq(double wFreq);

  /** Returns the starting write Timestamp*/
  TIMESTAMP initialWriteTimestamp(void) { return 20000;}

  /** Returns the starting read Timestamp*/
  TIMESTAMP initialReadTimestamp(void) { return 20000;}

  /** returns the full-scale transmit amplitude **/
  double fullScaleInputValue() {return 13500.0;}

  /** returns the full-scale receive amplitude **/
  double fullScaleOutputValue() {return 9450.0;}

  /** sets the receive chan gain, returns the gain setting **/
  double setRxGain(double dB);

  /** get the current receive gain */
  double getRxGain(void) {return rxGain;}

  /** return maximum Rx Gain **/
  double maxRxGain(void);

  /** return minimum Rx Gain **/
  double minRxGain(void);

  /** sets the transmit chan gain, returns the gain setting **/
  double setTxGain(double dB);

  /** return maximum Tx Gain **/
  double maxTxGain(void);

  /** return minimum Rx Gain **/
  double minTxGain(void);


  /** Return internal status values */
  inline double getTxFreq() { return 0;}
  inline double getRxFreq() { return 0;}
  inline double getSampleRate() {return actualSampleRate;}
  inline double numberRead() { return samplesRead; }
  inline double numberWritten() { return samplesWritten;}

};

#endif // _USRP_DEVICE_H_