osmo-trx (0.2.0) unstable; urgency=medium

  [ Alexander Chemeris ]
  * EDGE: Add support for UmTRX.
  * Common: Get rid of a compilation warning.
  * Common: Make sure gLogEarly() log to the same facilities as the normal log.
  * transceiver: Properly handle MAXDLY.
  * transceiver: Add an option to generate random Access Bursts.
  * osmo-trx: Output Rx SPS as a part of configuration output.
  * transceiver: Do not pass transceiver state struct to function where it's not used.
  * makefile: Fix build from an external path.
  * radioDevice: GSMRATE macro must have parentheses around its definition.
  * uhd: Fix comment.
  * radioInterface: Initialize power scale with a meaningful default.
  * transceiver: Log channel number in DEBUG output of demoded bursts.
  * transceiver: Add an option to emulate a RACH delay in random filler mode.
  * UHD: Initial LimeSDR support.
  * CommonLibs: Remove unused files.
  * sigProcLib: Typo sybols -> symbols
  * radioBuffer: Remove extra ; at the end of inline function definitions.
  * sigProcLib: Fix documentation, sync argument names in .cpp and .h files.
  * sigProcLib: make energyDetect() simpler by returning actual energy.
  * sigProcLib: Rename demodulateBurst() to demodGmskBurst() for clarity.
  * sigProcLib: Slice SoftVector instead of signalVector for GMSK demod.
  * Call vectorSlicer() right before packing bits for transmission to osmo-bts.
  * CommonLibs: Print soft bits with less confidence to console when printing a soft vector.
  * BitVector: Remove convolutional codec - we don't use it in osmo-trx.
  * BitVector: Convert SoftVector from 0..1 to -1..+1 soft bits.
  * signalVector: Implement segment().
  * vector: Introduce segmentMove() method to move data inside of a vector.
  * vector: Introduce shrink() function to shrink vector size without loosing data.
  * Move CorrType type from Transceiver to sigProcLib.
  * sigProcLib: rename signalError type to SignalError.
  * Move Transceiver::detectBurst() to sigProcLib to make it reusable.
  * Move BURST_THRESH from Transceiver.cpp to sigProcLib.h to make it reusable.
  * sigProcLib: Add operator<< to print CorrType to a string.
  * sigProcLib.h: Fix whitespaces. No non-whitespace changes.
  * Move Transceiver::demodulate() to sigProcLib to make it reusable.
  * sigProcLib: constify signalVector arguments for detectBurst() functions.
  * sigProcLib: Constify demodulation functions burst argument.
  * sigProcLib: Fix number of tail bits in random Normal Bursts and zero Stealing Bits.
  * Configuration: Variables allocated with 'new' must be freed with 'delete'.
  * BitVector: Remove Generator class.
  * PRBS: a Pseudo-random binary sequence (PRBS) generator class.

  [ Tom Tsou ]
  * EDGE: Fix USRP B210 device support
  * uhd: Correct timing alignment in 8-PSK and GMSK downlink bursts
  * EDGE: Fix demodulation slicer input
  * common: Restrict UDP binding to localhost only
  * common: Add mandatory length field to UDP receive calls
  * uhd: Update default E3XX settings
  * uhd: Set default Tx sampling to 4 sps
  * uhd: Make device offset check a private method
  * uhd: Set minimum UHD version requirement for E3XX
  * sigproc: Expand RACH, TSC, and EDGE correlation windows
  * transceiver: Do not report error on SETTSC when radio is on
  * transceiver: Add Rx samples-per-symbol option
  * radioInterface: Convert diversity argument to general type
  * iface: Add inner ring-buffer implementation
  * mcbts: Add multi-ARFCN channelizing filters
  * mcbts: Add multi-ARFCN radio support
  * sigproc: Adjust burst detection threshold criteria
  * egprs: Enable 8-PSK length vectors on the Tx interface
  * egprs: Enable 8-PSK burst detection when EDGE is enabled
  * transceiver: Remove HANDOVER warnings
  * mcbts: Allow out of order channel setup
  * radioInterface: Fix multi-channel buffer index bug
  * uhd: Add command line option for GPS reference
  * transceiver: Fix mixed GSMK / 8-PSK transmission
  * transceiver: Fix 4 SPS receive TOA value
  * sigproc: Fix missing 8-PSK tail symbols
  * uhd: Update USRP2/N200/N210 for 4 SPS Rx
  * sigproc: Match differential GMSK start/end bits to tail bits
  * uhd: Add missing B200 sample timing for 4 SPS receive
  * transceiver: Fix command build warning
  * uhd: Set minimum supported version to 3.9.0
  * uhd: Add X300 sample timing for 4 SPS
  * Revert "uhd: Set minimum supported version to 3.9.0"
  * uhd: Add support for UHD-3.11 logging control
  * uhd: Increase MC-BTS FPGA clock rate to 51.2 MHz
  * Resampler: Fix initialization return checking
  * sigProcLib: Remove unreachable code and no-effect checks
  * sigProcLib: Check return status on downsampling
  * sigProcLib: Fix negative value check on unsigned value
  * Resampler: Fix non-array delete for filter taps
  * Transceiver: Remove unsigned negative compares
  * Configuration: Fix const and signedness compile warnings
  * config: Remove OpenBTS style sqlite configuration
  * radioInterface: Remove UmTRX 'diversity' option
  * build: Require and check for gcc C++11 support
  * uhd: Use map container for for device parameter access
  * sigProcLib: Remove unused functions from public interface
  * uhd: Add non-UmTRX channel swap support
  * uhd: Fix Tx-RX timing offset setting
  * uhd: Fix USRP2/N200/N210 device detection
  * transceiver: Fix POWEROFF crash on USRP2/N200/X300 devices
  * sigProcLib: Fix complex/real vector flag in Laurent modulator
  * sigProcLib: Remove heap based signal vector allocations
  * common: Declare explicit Vector move constructor
  * sigProcLib: Remove trigonometric tables
  * sigProcLib: Use explicit NaN check in sinc table generation
  * sigProcLib: Replace dynamically allocated resampling buffers
  * sigProcLib: Specify standard namespace for isnan()
  * uhd: Always specify samples-per-symbol for device lookup
  * LimeSDR: set approximate tx offset value to make GSM work

  [ Neels Hofmeyr ]
  * add basic .gitignore
  * configure.ac: check for boost/config.hpp header
  * The INSTALL file is being overwritten by autoreconf, but it is committed as empty file. As a result, the INSTALL file always shows as modified. Instead, remove INSTALL from git and ignore it.
  * add contrib/jenkins.sh, for gerrit build bot

  [ pierre.baudry ]
  * transceiver: Fix mismatched allocations and deallocations

  [ Holger Hans Peter Freyther ]
  * debian: Require fftw3 header files for osmo-trx

  [ Max ]
  * Add gerrit settings
  * Integrate Debian packaging changes
  * Remove embedded sqlite3
  * Fix building against sqlite3
  * Add autoconf-archive to dependencies
  * debian: remove obsolete dependency
  * deb: remove unused dependency
  * Remove redundant explicit dependency
  * Use release helper from libosmocore

  [ Ruben Undheim ]
  * Do not embed sqlite3 when building

  [ Philipp Maier ]
  * buildenv: Turn off native architecture builds
  * cosmetic: Make parameter lists uniform
  * Add test program to verify convolution implementation
  * ssedetect: Add runtime CPU detection
  * cosmetic: remove code duplication
  * buildenv: Make build CPU invariant
  * buildenv: Split up SSE3 and SSE4.1 code
  * cosmetic: Add info about SSE support

  [ Vadim Yanitskiy ]
  * buildenv: correct the ax_sse macro description
  * buildenv: actually strip unused cpuid functionality
  * buildenv: fix build on systems without SIMD support
  * buildenv: cosmetic changes
  * buildenv: check for __builtin_cpu_supports call support
  * ssedetect: call __builtin_cpu_supports() only if supported

  [ Pau Espin Pedrol ]
  * cosmetic: transciever: Remove trailing whitespaces
  * transceiver: Avoid sending clock indications when trx is not powered on
  * Add -j option to bind to specific address

  [ ignasj ]
  * LimeSDR: Change device detection to work with USB and PCIe versions
  * LimeSDR: change tx window type to TX_WINDOW_FIXED
  * LimeSDR: Fix sample value range

  [ Harald Welte ]
  * Add '-t' command line option to enable SCHED_RR
  * Import git-version-gen and update AC_INIT()

 -- Harald Welte <laforge@gnumonks.org>  Sat, 28 Oct 2017 17:52:32 +0200

osmo-trx (0.1.9) trusty; urgency=medium

  * Ask Ivan, really

 -- Kirill Zakharenko <earwin@gmail.com>  Thu, 16 Jul 2015 12:13:46 +0000

osmo-trx (0.1.8) precise; urgency=low

     * Initial release (Closes: #nnnn) <nnnn is the bug number of your ITP

 -- Ivan Klyuchnikov <Ivan.Kluchnikov@fairwaves.ru>  Sun, 9 Mar 2014 14:10:10 +0400