initial checkin of manuals to public repo
The manuals existed in different form for several years in an internal
sysmocom repository. However, since they had just recently been
converted from docboox-xml to asciidoc and all files have been
re-shuffled for enabling the public release, there's not much point in
keeping the history with git-filter-branch.
diff --git a/doc/manuals/vty/sgsn_vty_reference.xml b/doc/manuals/vty/sgsn_vty_reference.xml
new file mode 100644
index 0000000..15a4237
--- /dev/null
+++ b/doc/manuals/vty/sgsn_vty_reference.xml
@@ -0,0 +1,1355 @@
+<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
+ <node id='0'>
+ </node>
+ <node id='1'>
+ <command id='show version'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='version' doc='Displays program version' />
+ </params>
+ </command>
+ <command id='show online-help'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='online-help' doc='Online help' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='enable'>
+ <params>
+ <param name='enable' doc='Turn on privileged mode command' />
+ </params>
+ </command>
+ <command id='terminal length <0-512>'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='length' doc='Set number of lines on a screen' />
+ <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+ </params>
+ </command>
+ <command id='terminal no length'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='length' doc='Set number of lines on a screen' />
+ </params>
+ </command>
+ <command id='echo .MESSAGE'>
+ <params>
+ <param name='echo' doc='Echo a message back to the vty' />
+ <param name='.MESSAGE' doc='The message to echo' />
+ </params>
+ </command>
+ <command id='who'>
+ <params>
+ <param name='who' doc='Display who is on vty' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='logging enable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='enable' doc='Enables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging disable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='disable' doc='Disables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging set-log-mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set-log-mask' doc='Set the logmask of this logging target' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging set log mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set' doc='Decide which categories to output.' />
+ <param name='log' doc='Log commands' />
+ <param name='mask' doc='Mask commands' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging level (all|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='mm' doc='Layer3 Mobility Management (MM)' />
+ <param name='pag' doc='Paging Subsystem' />
+ <param name='meas' doc='Radio Measurement Processing' />
+ <param name='ref' doc='Reference Counting' />
+ <param name='gprs' doc='GPRS Packet Service' />
+ <param name='ns' doc='GPRS Network Service (NS)' />
+ <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+ <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
+ <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='everything' doc='Log simply everything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='show logging vty'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='logging' doc='Show current logging configuration' />
+ <param name='vty' doc='Show current logging configuration for this vty' />
+ </params>
+ </command>
+ <command id='show alarms'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='alarms' doc='Show current logging configuration' />
+ </params>
+ </command>
+ <command id='show sgsn'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='sgsn' doc='Display information about the SGSN' />
+ </params>
+ </command>
+ <command id='show mm-context imsi IMSI [pdp]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='mm-context' doc='MM Context' />
+ <param name='imsi' doc='Identify by IMSI' />
+ <param name='IMSI' doc='IMSI of the MM Context' />
+ <param name='[pdp]' doc='Include PDP Context Information' />
+ </params>
+ </command>
+ <command id='show mm-context all [pdp]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='mm-context' doc='MM Context' />
+ <param name='all' doc='All MM Contexts' />
+ <param name='[pdp]' doc='Include PDP Context Information' />
+ </params>
+ </command>
+ <command id='show pdp-context all'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='pdp-context' doc='Display information on PDP Context' />
+ <param name='all' doc='Show everything' />
+ </params>
+ </command>
+ <command id='show ns'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='ns' doc='Display information about the NS protocol' />
+ </params>
+ </command>
+ <command id='show ns stats'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='ns' doc='Display information about the NS protocol' />
+ <param name='stats' doc='Include statistics' />
+ </params>
+ </command>
+ <command id='show ns (nsei|nsvc) <0-65535> [stats]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='ns' doc='Display information about the NS protocol' />
+ <param name='nsei' doc='Select one NSE by its NSE Identifier' />
+ <param name='nsvc' doc='Select one NSE by its NS-VC Identifier' />
+ <param name='<0-65535>' doc='The Identifier of selected type' />
+ <param name='[stats]' doc='Include Statistics' />
+ </params>
+ </command>
+ <command id='logging filter nsvc (nsei|nsvci) <0-65535>'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='nsvc' doc='Filter based on NS Virtual Connection' />
+ <param name='nsei' doc='Identify NS-VC by NSEI' />
+ <param name='nsvci' doc='Identify NS-VC by NSVCI' />
+ <param name='<0-65535>' doc='Numeric identifier' />
+ </params>
+ </command>
+ <command id='show bssgp'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bssgp' doc='Show information about the BSSGP protocol' />
+ </params>
+ </command>
+ <command id='show bssgp stats'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bssgp' doc='Show information about the BSSGP protocol' />
+ <param name='stats' doc='Include statistics' />
+ </params>
+ </command>
+ <command id='show bssgp nsei <0-65535> [stats]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bssgp' doc='Show information about the BSSGP protocol' />
+ <param name='nsei' doc='Show all BVCs on one NSE' />
+ <param name='<0-65535>' doc='The NSEI' />
+ <param name='[stats]' doc='Include Statistics' />
+ </params>
+ </command>
+ <command id='logging filter bvc nsei <0-65535> bvci <0-65535>'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='bvc' doc='Filter based on BSSGP Virtual Connection' />
+ <param name='nsei' doc='NSEI of the BVC to be filtered' />
+ <param name='<0-65535>' doc='Network Service Entity Identifier (NSEI)' />
+ <param name='bvci' doc='BVCI of the BVC to be filtered' />
+ <param name='<0-65535>' doc='BSSGP Virtual Connection Identifier (BVCI)' />
+ </params>
+ </command>
+ <command id='show llc'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='llc' doc='Display information about the LLC protocol' />
+ </params>
+ </command>
+ <command id='show sndcp'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='sndcp' doc='Display information about the SNDCP protocol' />
+ </params>
+ </command>
+ </node>
+ <node id='2'>
+ </node>
+ <node id='3'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='disable'>
+ <params>
+ <param name='disable' doc='Turn off privileged mode command' />
+ </params>
+ </command>
+ <command id='configure terminal'>
+ <params>
+ <param name='configure' doc='Configuration from vty interface' />
+ <param name='terminal' doc='Configuration terminal' />
+ </params>
+ </command>
+ <command id='copy running-config startup-config'>
+ <params>
+ <param name='copy' doc='Copy configuration' />
+ <param name='running-config' doc='Copy running config to... ' />
+ <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
+ </params>
+ </command>
+ <command id='show startup-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='startup-config' doc='Contentes of startup configuration' />
+ </params>
+ </command>
+ <command id='show version'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='version' doc='Displays program version' />
+ </params>
+ </command>
+ <command id='show online-help'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='online-help' doc='Online help' />
+ </params>
+ </command>
+ <command id='terminal length <0-512>'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='length' doc='Set number of lines on a screen' />
+ <param name='<0-512>' doc='Number of lines on screen (0 for no pausing)' />
+ </params>
+ </command>
+ <command id='terminal no length'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='length' doc='Set number of lines on a screen' />
+ </params>
+ </command>
+ <command id='echo .MESSAGE'>
+ <params>
+ <param name='echo' doc='Echo a message back to the vty' />
+ <param name='.MESSAGE' doc='The message to echo' />
+ </params>
+ </command>
+ <command id='who'>
+ <params>
+ <param name='who' doc='Display who is on vty' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='terminal monitor'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='monitor' doc='Copy debug output to the current terminal line' />
+ </params>
+ </command>
+ <command id='terminal no monitor'>
+ <params>
+ <param name='terminal' doc='Set terminal line parameters' />
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='monitor' doc='Copy debug output to the current terminal line' />
+ </params>
+ </command>
+ <command id='logging enable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='enable' doc='Enables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging disable'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='disable' doc='Disables logging to this vty' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging set-log-mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set-log-mask' doc='Set the logmask of this logging target' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging set log mask MASK'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='set' doc='Decide which categories to output.' />
+ <param name='log' doc='Log commands' />
+ <param name='mask' doc='Mask commands' />
+ <param name='MASK' doc='The logmask to use' />
+ </params>
+ </command>
+ <command id='logging level (all|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='mm' doc='Layer3 Mobility Management (MM)' />
+ <param name='pag' doc='Paging Subsystem' />
+ <param name='meas' doc='Radio Measurement Processing' />
+ <param name='ref' doc='Reference Counting' />
+ <param name='gprs' doc='GPRS Packet Service' />
+ <param name='ns' doc='GPRS Network Service (NS)' />
+ <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+ <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
+ <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='everything' doc='Log simply everything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='show logging vty'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='logging' doc='Show current logging configuration' />
+ <param name='vty' doc='Show current logging configuration for this vty' />
+ </params>
+ </command>
+ <command id='show alarms'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='alarms' doc='Show current logging configuration' />
+ </params>
+ </command>
+ <command id='show sgsn'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='sgsn' doc='Display information about the SGSN' />
+ </params>
+ </command>
+ <command id='show mm-context imsi IMSI [pdp]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='mm-context' doc='MM Context' />
+ <param name='imsi' doc='Identify by IMSI' />
+ <param name='IMSI' doc='IMSI of the MM Context' />
+ <param name='[pdp]' doc='Include PDP Context Information' />
+ </params>
+ </command>
+ <command id='show mm-context all [pdp]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='mm-context' doc='MM Context' />
+ <param name='all' doc='All MM Contexts' />
+ <param name='[pdp]' doc='Include PDP Context Information' />
+ </params>
+ </command>
+ <command id='show pdp-context all'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='pdp-context' doc='Display information on PDP Context' />
+ <param name='all' doc='Show everything' />
+ </params>
+ </command>
+ <command id='show ns'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='ns' doc='Display information about the NS protocol' />
+ </params>
+ </command>
+ <command id='show ns stats'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='ns' doc='Display information about the NS protocol' />
+ <param name='stats' doc='Include statistics' />
+ </params>
+ </command>
+ <command id='show ns (nsei|nsvc) <0-65535> [stats]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='ns' doc='Display information about the NS protocol' />
+ <param name='nsei' doc='Select one NSE by its NSE Identifier' />
+ <param name='nsvc' doc='Select one NSE by its NS-VC Identifier' />
+ <param name='<0-65535>' doc='The Identifier of selected type' />
+ <param name='[stats]' doc='Include Statistics' />
+ </params>
+ </command>
+ <command id='logging filter nsvc (nsei|nsvci) <0-65535>'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='nsvc' doc='Filter based on NS Virtual Connection' />
+ <param name='nsei' doc='Identify NS-VC by NSEI' />
+ <param name='nsvci' doc='Identify NS-VC by NSVCI' />
+ <param name='<0-65535>' doc='Numeric identifier' />
+ </params>
+ </command>
+ <command id='nsvc (nsei|nsvci) <0-65535> (block|unblock|reset)'>
+ <params>
+ <param name='nsvc' doc='Perform an operation on a NSVC' />
+ <param name='nsei' doc='NSEI to identify NS-VC Identifier (NS-VCI)' />
+ <param name='nsvci' doc='NS-VC Identifier (NS-VCI)' />
+ <param name='<0-65535>' doc='The NSEI' />
+ <param name='block' doc='Initiate BLOCK procedure' />
+ <param name='unblock' doc='Initiate UNBLOCK procedure' />
+ <param name='reset' doc='Initiate RESET procedure' />
+ </params>
+ </command>
+ <command id='show bssgp'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bssgp' doc='Show information about the BSSGP protocol' />
+ </params>
+ </command>
+ <command id='show bssgp stats'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bssgp' doc='Show information about the BSSGP protocol' />
+ <param name='stats' doc='Include statistics' />
+ </params>
+ </command>
+ <command id='show bssgp nsei <0-65535> [stats]'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='bssgp' doc='Show information about the BSSGP protocol' />
+ <param name='nsei' doc='Show all BVCs on one NSE' />
+ <param name='<0-65535>' doc='The NSEI' />
+ <param name='[stats]' doc='Include Statistics' />
+ </params>
+ </command>
+ <command id='logging filter bvc nsei <0-65535> bvci <0-65535>'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='bvc' doc='Filter based on BSSGP Virtual Connection' />
+ <param name='nsei' doc='NSEI of the BVC to be filtered' />
+ <param name='<0-65535>' doc='Network Service Entity Identifier (NSEI)' />
+ <param name='bvci' doc='BVCI of the BVC to be filtered' />
+ <param name='<0-65535>' doc='BSSGP Virtual Connection Identifier (BVCI)' />
+ </params>
+ </command>
+ <command id='show llc'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='llc' doc='Display information about the LLC protocol' />
+ </params>
+ </command>
+ <command id='show sndcp'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='sndcp' doc='Display information about the SNDCP protocol' />
+ </params>
+ </command>
+ </node>
+ <node id='4'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='hostname WORD'>
+ <params>
+ <param name='hostname' doc='Set system's network name' />
+ <param name='WORD' doc='This system's network name' />
+ </params>
+ </command>
+ <command id='no hostname [HOSTNAME]'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='hostname' doc='Reset system's network name' />
+ <param name='[HOSTNAME]' doc='Host name of this router' />
+ </params>
+ </command>
+ <command id='password (8|) WORD'>
+ <params>
+ <param name='password' doc='Assign the terminal connection password' />
+ <param name='8' doc='Specifies a HIDDEN password will follow' />
+ <param name='' doc='dummy string ' />
+ <param name='WORD' doc='The HIDDEN line password string' />
+ </params>
+ </command>
+ <command id='password LINE'>
+ <params>
+ <param name='password' doc='Assign the terminal connection password' />
+ <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
+ </params>
+ </command>
+ <command id='enable password (8|) WORD'>
+ <params>
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ <param name='8' doc='Specifies a HIDDEN password will follow' />
+ <param name='' doc='dummy string ' />
+ <param name='WORD' doc='The HIDDEN 'enable' password string' />
+ </params>
+ </command>
+ <command id='enable password LINE'>
+ <params>
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ <param name='LINE' doc='The UNENCRYPTED (cleartext) 'enable' password' />
+ </params>
+ </command>
+ <command id='no enable password'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='enable' doc='Modify enable password parameters' />
+ <param name='password' doc='Assign the privileged level password' />
+ </params>
+ </command>
+ <command id='banner motd default'>
+ <params>
+ <param name='banner' doc='Set banner string' />
+ <param name='motd' doc='Strings for motd' />
+ <param name='default' doc='Default string' />
+ </params>
+ </command>
+ <command id='banner motd file [FILE]'>
+ <params>
+ <param name='banner' doc='Set banner' />
+ <param name='motd' doc='Banner for motd' />
+ <param name='file' doc='Banner from a file' />
+ <param name='[FILE]' doc='Filename' />
+ </params>
+ </command>
+ <command id='no banner motd'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='banner' doc='Set banner string' />
+ <param name='motd' doc='Strings for motd' />
+ </params>
+ </command>
+ <command id='service terminal-length <0-512>'>
+ <params>
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='terminal-length' doc='System wide terminal length configuration' />
+ <param name='<0-512>' doc='Number of lines of VTY (0 means no line control)' />
+ </params>
+ </command>
+ <command id='no service terminal-length [<0-512>]'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='terminal-length' doc='System wide terminal length configuration' />
+ <param name='[<0-512>]' doc='Number of lines of VTY (0 means no line control)' />
+ </params>
+ </command>
+ <command id='line vty'>
+ <params>
+ <param name='line' doc='Configure a terminal line' />
+ <param name='vty' doc='Virtual terminal' />
+ </params>
+ </command>
+ <command id='service advanced-vty'>
+ <params>
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+ </params>
+ </command>
+ <command id='no service advanced-vty'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='service' doc='Set up miscellaneous service' />
+ <param name='advanced-vty' doc='Enable advanced mode vty interface' />
+ </params>
+ </command>
+ <command id='show history'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='history' doc='Display the session command history' />
+ </params>
+ </command>
+ <command id='log stderr'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='stderr' doc='Logging via STDERR of the process' />
+ </params>
+ </command>
+ <command id='no log stderr'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='stderr' doc='Logging via STDERR of the process' />
+ </params>
+ </command>
+ <command id='log file .FILENAME'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='file' doc='Logging to text file' />
+ <param name='.FILENAME' doc='Filename' />
+ </params>
+ </command>
+ <command id='no log file .FILENAME'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='file' doc='Logging to text file' />
+ <param name='.FILENAME' doc='Filename' />
+ </params>
+ </command>
+ <command id='log alarms <2-32700>'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='alarms' doc='Logging alarms to osmo_strrb' />
+ <param name='<2-32700>' doc='Maximum number of messages to log' />
+ </params>
+ </command>
+ <command id='no log alarms'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='alarms' doc='Logging alarms to osmo_strrb' />
+ </params>
+ </command>
+ <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ <param name='authpriv' doc='Security/authorization messages facility' />
+ <param name='cron' doc='Clock daemon (cron/at) facility' />
+ <param name='daemon' doc='General system daemon facility' />
+ <param name='ftp' doc='Ftp daemon facility' />
+ <param name='lpr' doc='Line printer facility' />
+ <param name='mail' doc='Mail facility' />
+ <param name='news' doc='News facility' />
+ <param name='user' doc='Generic facility' />
+ <param name='uucp' doc='UUCP facility' />
+ </params>
+ </command>
+ <command id='log syslog local <0-7>'>
+ <params>
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ <param name='local' doc='Syslog LOCAL facility' />
+ <param name='<0-7>' doc='Local facility number' />
+ </params>
+ </command>
+ <command id='no log syslog'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='log' doc='Configure logging sub-system' />
+ <param name='syslog' doc='Logging via syslog' />
+ </params>
+ </command>
+ <command id='sgsn'>
+ <params>
+ <param name='sgsn' doc='Configure the SGSN' />
+ </params>
+ </command>
+ <command id='ns'>
+ <params>
+ <param name='ns' doc='Configure the GPRS Network Service' />
+ </params>
+ </command>
+ <command id='bssgp'>
+ <params>
+ <param name='bssgp' doc='Configure the GPRS BSS Gateway Protocol' />
+ </params>
+ </command>
+ </node>
+ <node id='7'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='logging filter all (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='all' doc='Do you want to log all messages?' />
+ <param name='0' doc='Only print messages matched by other filters' />
+ <param name='1' doc='Bypass filter and print all messages' />
+ </params>
+ </command>
+ <command id='logging color (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='color' doc='Configure color-printing for log messages' />
+ <param name='0' doc='Don't use color for printing messages' />
+ <param name='1' doc='Use color for printing messages' />
+ </params>
+ </command>
+ <command id='logging timestamp (0|1)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='timestamp' doc='Configure log message timestamping' />
+ <param name='0' doc='Don't prefix each log message' />
+ <param name='1' doc='Prefix each log message with current timestamp' />
+ </params>
+ </command>
+ <command id='logging level (all|mm|pag|meas|ref|gprs|ns|bssgp|llc|sndcp|lglobal|llapd|linp|lmux|lmi|lmib|lsms) (everything|debug|info|notice|error|fatal)'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='level' doc='Set the log level for a specified category' />
+ <param name='all' doc='Global setting for all subsystems' />
+ <param name='mm' doc='Layer3 Mobility Management (MM)' />
+ <param name='pag' doc='Paging Subsystem' />
+ <param name='meas' doc='Radio Measurement Processing' />
+ <param name='ref' doc='Reference Counting' />
+ <param name='gprs' doc='GPRS Packet Service' />
+ <param name='ns' doc='GPRS Network Service (NS)' />
+ <param name='bssgp' doc='GPRS BSS Gateway Protocol (BSSGP)' />
+ <param name='llc' doc='GPRS Logical Link Control Protocol (LLC)' />
+ <param name='sndcp' doc='GPRS Sub-Network Dependent Control Protocol (SNDCP)' />
+ <param name='lglobal' doc='Library-internal global log family' />
+ <param name='llapd' doc='LAPD in libosmogsm' />
+ <param name='linp' doc='A-bis Intput Subsystem' />
+ <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
+ <param name='lmi' doc='A-bis Input Driver for Signalling' />
+ <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
+ <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
+ <param name='everything' doc='Log simply everything' />
+ <param name='debug' doc='Log debug messages and higher levels' />
+ <param name='info' doc='Log informational messages and higher levels' />
+ <param name='notice' doc='Log noticable messages and higher levels' />
+ <param name='error' doc='Log error messages and higher levels' />
+ <param name='fatal' doc='Log only fatal messages' />
+ </params>
+ </command>
+ <command id='logging filter nsvc (nsei|nsvci) <0-65535>'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='nsvc' doc='Filter based on NS Virtual Connection' />
+ <param name='nsei' doc='Identify NS-VC by NSEI' />
+ <param name='nsvci' doc='Identify NS-VC by NSVCI' />
+ <param name='<0-65535>' doc='Numeric identifier' />
+ </params>
+ </command>
+ <command id='logging filter bvc nsei <0-65535> bvci <0-65535>'>
+ <params>
+ <param name='logging' doc='Configure log message to this terminal' />
+ <param name='filter' doc='Filter log messages' />
+ <param name='bvc' doc='Filter based on BSSGP Virtual Connection' />
+ <param name='nsei' doc='NSEI of the BVC to be filtered' />
+ <param name='<0-65535>' doc='Network Service Entity Identifier (NSEI)' />
+ <param name='bvci' doc='BVCI of the BVC to be filtered' />
+ <param name='<0-65535>' doc='BSSGP Virtual Connection Identifier (BVCI)' />
+ </params>
+ </command>
+ </node>
+ <node id='8'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='login'>
+ <params>
+ <param name='login' doc='Enable password checking' />
+ </params>
+ </command>
+ <command id='no login'>
+ <params>
+ <param name='no' doc='Negate a command or set its defaults' />
+ <param name='login' doc='Enable password checking' />
+ </params>
+ </command>
+ </node>
+ <node id='11'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='nse <0-65535> nsvci <0-65534>'>
+ <params>
+ <param name='nse' doc='Persistent NS Entity' />
+ <param name='<0-65535>' doc='NS Entity ID (NSEI)' />
+ <param name='nsvci' doc='NS Virtual Connection' />
+ <param name='<0-65534>' doc='NS Virtual Connection ID (NSVCI)' />
+ </params>
+ </command>
+ <command id='nse <0-65535> remote-ip A.B.C.D'>
+ <params>
+ <param name='nse' doc='Persistent NS Entity' />
+ <param name='<0-65535>' doc='NS Entity ID (NSEI)' />
+ <param name='remote-ip' doc='Remote IP Address' />
+ <param name='A.B.C.D' doc='Remote IP Address' />
+ </params>
+ </command>
+ <command id='nse <0-65535> remote-port <0-65535>'>
+ <params>
+ <param name='nse' doc='Persistent NS Entity' />
+ <param name='<0-65535>' doc='NS Entity ID (NSEI)' />
+ <param name='remote-port' doc='Remote UDP Port' />
+ <param name='<0-65535>' doc='Remote UDP Port Number' />
+ </params>
+ </command>
+ <command id='nse <0-65535> fr-dlci <16-1007>'>
+ <params>
+ <param name='nse' doc='Persistent NS Entity' />
+ <param name='<0-65535>' doc='NS Entity ID (NSEI)' />
+ <param name='fr-dlci' doc='Frame Relay DLCI' />
+ <param name='<16-1007>' doc='Frame Relay DLCI Number' />
+ </params>
+ </command>
+ <command id='nse <0-65535> encapsulation (udp|framerelay-gre)'>
+ <params>
+ <param name='nse' doc='Persistent NS Entity' />
+ <param name='<0-65535>' doc='NS Entity ID (NSEI)' />
+ <param name='encapsulation' doc='Encapsulation for NS' />
+ <param name='udp' doc='UDP/IP Encapsulation' />
+ <param name='framerelay-gre' doc='Frame-Relay/GRE/IP Encapsulation' />
+ </params>
+ </command>
+ <command id='nse <0-65535> remote-role (sgsn|bss)'>
+ <params>
+ <param name='nse' doc='Persistent NS Entity' />
+ <param name='<0-65535>' doc='NS Entity ID (NSEI)' />
+ <param name='remote-role' doc='Remote NSE Role' />
+ <param name='sgsn' doc='Remote Peer is SGSN' />
+ <param name='bss' doc='Remote Peer is BSS' />
+ </params>
+ </command>
+ <command id='no nse <0-65535>'>
+ <params>
+ <param name='no' doc='Delete Persistent NS Entity' />
+ <param name='nse' doc='Delete Persistent NS Entity' />
+ <param name='<0-65535>' doc='NS Entity ID (NSEI)' />
+ </params>
+ </command>
+ <command id='timer (tns-block|tns-block-retries|tns-reset|tns-reset-retries|tns-test|tns-alive|tns-alive-retries) <0-65535>'>
+ <params>
+ <param name='timer' doc='Network Service Timer' />
+ <param name='tns-block' doc='(un)blocking Timer (Tns-block) timeout' />
+ <param name='tns-block-retries' doc='(un)blocking Timer (Tns-block) number of retries' />
+ <param name='tns-reset' doc='Reset Timer (Tns-reset) timeout' />
+ <param name='tns-reset-retries' doc='Reset Timer (Tns-reset) number of retries' />
+ <param name='tns-test' doc='Test Timer (Tns-test) timeout' />
+ <param name='tns-alive' doc='Alive Timer (Tns-alive) timeout' />
+ <param name='tns-alive-retries' doc='Alive Timer (Tns-alive) number of retries' />
+ <param name='<0-65535>' doc='Timer Value' />
+ </params>
+ </command>
+ <command id='encapsulation udp local-ip A.B.C.D'>
+ <params>
+ <param name='encapsulation' doc='NS encapsulation options' />
+ <param name='udp' doc='NS over UDP Encapsulation' />
+ <param name='local-ip' doc='Set the IP address on which we listen for NS/UDP' />
+ <param name='A.B.C.D' doc='IP Address' />
+ </params>
+ </command>
+ <command id='encapsulation udp local-port <0-65535>'>
+ <params>
+ <param name='encapsulation' doc='NS encapsulation options' />
+ <param name='udp' doc='NS over UDP Encapsulation' />
+ <param name='local-port' doc='Set the UDP port on which we listen for NS/UDP' />
+ <param name='<0-65535>' doc='UDP port number' />
+ </params>
+ </command>
+ <command id='encapsulation udp dscp <0-255>'>
+ <params>
+ <param name='encapsulation' doc='NS encapsulation options' />
+ <param name='udp' doc='NS over UDP Encapsulation' />
+ <param name='dscp' doc='Set DSCP/TOS on the UDP socket' />
+ <param name='<0-255>' doc='DSCP Value' />
+ </params>
+ </command>
+ <command id='encapsulation framerelay-gre enabled (1|0)'>
+ <params>
+ <param name='encapsulation' doc='NS encapsulation options' />
+ <param name='framerelay-gre' doc='NS over Frame Relay over GRE Encapsulation' />
+ <param name='enabled' doc='Enable or disable Frame Relay over GRE' />
+ <param name='1' doc='Enable' />
+ <param name='0' doc='Disable' />
+ </params>
+ </command>
+ <command id='encapsulation framerelay-gre local-ip A.B.C.D'>
+ <params>
+ <param name='encapsulation' doc='NS encapsulation options' />
+ <param name='framerelay-gre' doc='NS over Frame Relay over GRE Encapsulation' />
+ <param name='local-ip' doc='Set the IP address on which we listen for NS/FR/GRE' />
+ <param name='A.B.C.D' doc='IP Address' />
+ </params>
+ </command>
+ </node>
+ <node id='12'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ </node>
+ <node id='21'>
+ <command id='help'>
+ <params>
+ <param name='help' doc='Description of the interactive help system' />
+ </params>
+ </command>
+ <command id='list'>
+ <params>
+ <param name='list' doc='Print command list' />
+ </params>
+ </command>
+ <command id='write terminal'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='terminal' doc='Write to terminal' />
+ </params>
+ </command>
+ <command id='write file'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='file' doc='Write to configuration file' />
+ </params>
+ </command>
+ <command id='write memory'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ <param name='memory' doc='Write configuration to the file (same as write file)' />
+ </params>
+ </command>
+ <command id='write'>
+ <params>
+ <param name='write' doc='Write running configuration to memory, network, or terminal' />
+ </params>
+ </command>
+ <command id='show running-config'>
+ <params>
+ <param name='show' doc='Show running system information' />
+ <param name='running-config' doc='running configuration' />
+ </params>
+ </command>
+ <command id='exit'>
+ <params>
+ <param name='exit' doc='Exit current mode and down to previous mode' />
+ </params>
+ </command>
+ <command id='end'>
+ <params>
+ <param name='end' doc='End current mode and change to enable mode.' />
+ </params>
+ </command>
+ <command id='gtp local-ip A.B.C.D'>
+ <params>
+ <param name='gtp' doc='GTP Parameters' />
+ <param name='local-ip' doc='Set the IP address for the local GTP bind' />
+ <param name='A.B.C.D' doc='IPv4 Address' />
+ </params>
+ </command>
+ <command id='ggsn <0-255> remote-ip A.B.C.D'>
+ <params>
+ <param name='ggsn' doc='Configure the GGSN information' />
+ <param name='<0-255>' doc='GGSN Number' />
+ <param name='remote-ip' doc='IP information' />
+ <param name='A.B.C.D' doc='IPv4 Address' />
+ </params>
+ </command>
+ <command id='ggsn <0-255> gtp-version (0|1)'>
+ <params>
+ <param name='ggsn' doc='Configure the GGSN information' />
+ <param name='<0-255>' doc='GGSN Number' />
+ <param name='gtp-version' doc='GTP Version' />
+ <param name='0' doc='Version 0' />
+ <param name='1' doc='Version 1' />
+ </params>
+ </command>
+ <command id='imsi-acl (add|del) IMSI'>
+ <params>
+ <param name='imsi-acl' doc='Access Control List of foreign IMSIs' />
+ <param name='add' doc='Add IMSI to ACL' />
+ <param name='del' doc='Remove IMSI from ACL' />
+ <param name='IMSI' doc='IMSI of subscriber' />
+ </params>
+ </command>
+ <command id='auth-policy (accept-all|closed)'>
+ <params>
+ <param name='auth-policy' doc='Autorization Policy of SGSN' />
+ <param name='accept-all' doc='Accept all IMSIs (DANGEROUS' />
+ <param name='closed' doc='Accept only home network subscribers or those in ACL' />
+ </params>
+ </command>
+ </node>
+</vtydoc>
\ No newline at end of file