----------------------------------------------------------------------
-- RSPRO - Remote SIM Protocol, part of Osmocom Remote SIM Suite
-- (C) 2018 by Harald Welte <laforge@gnumonks.org>
----------------------------------------------------------------------

RSPRO {} DEFINITIONS

IMPLICIT TAGS

::=

BEGIN

EXPORTS
	RsproPDU
;

----------------------------------------------------------------------
-- Elementary Data Types
----------------------------------------------------------------------

-- Some random ID the requestor can chose and which the client echos back in a response.
-- This allows multiple outstanding commands in flight and matching of responses to requests.
OperationTag ::= INTEGER(0..2147483647)

-- Unique identifier of a given SIM bank
BankId ::= INTEGER(0..1023)

-- Unique identifier of a given client (modem)
ClientId ::= INTEGER(0..1023)

ComponentType ::= ENUMERATED {
	-- client: Modems / Phones
	remsimClient			(0),
	-- server: Coordination
	remsimServer			(1),
	-- bank daemon: SIM cards
	remsimBankd			(2)
}
ComponentName ::= IA5String (SIZE (1..32))
ComponentIdentity ::= SEQUENCE {
	type		ComponentType,
	name		ComponentName,
	software	[0] ComponentName,
	swVersion	[1] ComponentName,
	hwManufacturer	[2] ComponentName OPTIONAL,
	hwModel		[3] ComponentName OPTIONAL,
	hwSerialNr	[4] ComponentName OPTIONAL,
	hwVersion	[5] ComponentName OPTIONAL,
	fwVersion	[6] ComponentName OPTIONAL,
	...
}

-- IP address / port details
Ipv4Address ::= OCTET STRING (SIZE (4))
Ipv6Address ::= OCTET STRING (SIZE (16))
IpAddress ::= CHOICE {
	ipv4	[0] Ipv4Address,
	ipv6	[1] Ipv6Address
}
PortNumber ::= INTEGER (0..65535)
IpPort ::= SEQUENCE {
	ip	IpAddress,
	port	PortNumber
}

-- Result of a given operation
ResultCode ::= ENUMERATED {
	ok				(0),
	-- client / bank / slot ID not accepted
	illegalClientId			(1),
	illegalBankId			(2),
	illegalSlotId			(3),

	-- no card is present in given slot
	cardNotPresent			(100),
	-- card is present but unresponsive in given slot
	cardUnresponsive		(101),
	-- unrecoverable transmission errors detected
	cardTransmissionError		(102),
	...
}

-- Slot number within a SIM bank or a client.
SlotNumber ::= INTEGER(0..1023)

-- Slot identity on client (modem) side
ClientSlot ::= SEQUENCE {
	clientId	ClientId,
	slotNr		SlotNumber,
	...
}

-- Slot identity on SIM bank side
BankSlot ::= SEQUENCE {
	bankId		BankId,
	slotNr		SlotNumber,
	...
}

ATR ::= OCTET STRING (SIZE (1..55))

-- flags related to a TPDU in either of the two directions
TpduFlags ::= SEQUENCE {
	-- indicates a TPDU header is present in this message
	tpduHeaderPresent	BOOLEAN,
	-- indicates last part of transmission in this direction
	finalPart		BOOLEAN,
	-- indicates a PB is present and we should continue with TX
	procByteContinueTx	BOOLEAN,
	-- indicates a PB is present and we should continue with RX
	procByteContinueRx	BOOLEAN,
	...
}

--- physical state of a given slot
SlotPhysStatus ::= SEQUENCE {
	-- is RST activated by the modem?
	resetActive	[0] BOOLEAN,
	-- is VCC applied by the modem?
	vccPresent	[1] BOOLEAN OPTIONAL,
	-- is CLK applied by the modem?
	clkActive	[2] BOOLEAN OPTIONAL, -- not all hardware supports this
	-- is card presence signalled to the modem?
	cardPresent	[3] BOOLEAN OPTIONAL,
	...
}

----------------------------------------------------------------------
-- Messages
----------------------------------------------------------------------


-- BANKD->SERVER: SIM Bank connects to central server
ConnectBankReq ::= SEQUENCE {
	-- identity of the bank that is connecting to the server
	identity	ComponentIdentity,
	-- bank number, pre-configured on bank side
	bankId		BankId,
	numberOfSlots	SlotNumber,
	...
}
ConnectBankRes ::= SEQUENCE {
	-- identity of the server to which the bank is connecting
	identity	ComponentIdentity,
	result		ResultCode,
	...
}

-- CLIENT->SERVER or CLIENT->BANKD
ConnectClientReq ::= SEQUENCE {
	-- identity of the client that is connecting to the server/bankd
	identity	ComponentIdentity,
	clientSlot	ClientSlot OPTIONAL, -- mandatory for CL->BANKD; CL->SERVER: old identity, if any
	...
}
ConnectClientRes ::= SEQUENCE {
	-- identity of the bankd/server to which the client is connecting
	identity	ComponentIdentity,
	result		ResultCode,
	...
}

-- SERVER->BANKD: create a mapping between a given Bank:Slot <-> Client:Slot
CreateMappingReq ::= SEQUENCE {
	client		ClientSlot,
	bank		BankSlot,
	...
}
CreateMappingRes ::= SEQUENCE {
	result		ResultCode,
	...
}

-- SERVER->BANKD: remove a mapping between a given Bank:Slot <-> Client:Slot
RemoveMappingReq ::= SEQUENCE {
	client		ClientSlot,
	bank		BankSlot,
	...
}
RemoveMappingRes ::= SEQUENCE {
	result		ResultCode,
	...
}

-- SERVER->CLIENT: set configuration (client ID and BANK IP/Port)
ConfigClientReq ::= SEQUENCE {
	-- server-allocated assignment of a client ID
	clientSlot	ClientSlot,
	-- bank to which the client shall connect
	bankd		IpPort,
	...
}
ConfigClientRes ::= SEQUENCE {
	result		ResultCode,
	...
}

-- BANKD->CLIENT: configure the ATR which the card emulator (client) shall send to the modem
SetAtrReq ::= SEQUENCE {
	slot		ClientSlot,
	atr		ATR,
	...
}
SetAtrRes ::= SEQUENCE {
	result		ResultCode,
	...
}

-- CLIENT->BANKD: TPDU in Modem -> Card direction
TpduModemToCard ::= SEQUENCE {
	-- we include fully-qualified bank and client slots for easier debugging
	fromClientSlot	ClientSlot,
	toBankSlot	BankSlot,
	flags		TpduFlags,
	data		OCTET STRING,
	...
}

-- BANKD->CLIENT: TPDU in Card -> Modem direction
TpduCardToModem ::= SEQUENCE {
	-- we include fully-qualified bank and client slots for easier debugging
	fromBankSlot	BankSlot,
	toClientSlot	ClientSlot,
	flags		TpduFlags,
	data		OCTET STRING,
	...
}

-- CLIENT->BANKD: indciation about the current status of a client (modem side)
ClientSlotStatusInd ::= SEQUENCE {
	fromClientSlot	ClientSlot,
	toBankSlot	BankSlot,
	slotPhysStatus	SlotPhysStatus,
	...
}

-- BANKD->CLIENT: indciation about the current status of a bank (modem side)
BankSlotStatusInd ::= SEQUENCE {
	fromBankSlot	BankSlot,
	toClientSlot	ClientSlot,
	slotPhysStatus	SlotPhysStatus,
	...
}

----------------------------------------------------------------------
-- PDU
----------------------------------------------------------------------

RsproPDUchoice ::= CHOICE {
	-- configuration + management
	connectBankReq		[0]	ConnectBankReq,
	connectBankRes		[1]	ConnectBankRes,
	connectClientReq	[2]	ConnectClientReq,
	connectClientRes	[3]	ConnectClientRes,
	createMappingReq	[4]	CreateMappingReq,
	createMappingRes	[5]	CreateMappingRes,
	removeMappingReq	[6]	RemoveMappingReq,
	removeMappingRes	[7]	RemoveMappingRes,
	configClientReq		[8]	ConfigClientReq,
	configClientRes		[9]	ConfigClientRes,
	-- APDUs etc.
	setAtrReq		[10]	SetAtrReq,
	setAtrRes		[11]	SetAtrRes,
	tpduModemToCard		[12]	TpduModemToCard,
	tpduCardToModem		[13]	TpduCardToModem,
	clientSlotStatusInd	[14]	ClientSlotStatusInd,
	bankSlotStatusInd	[15]	BankSlotStatusInd,
	...
}

RsproPDU ::= SEQUENCE {
	version		[0] INTEGER(0..32),
	tag		[1] OperationTag,
	msg		[2] RsproPDUchoice
}

END