[[remsim-bankd]]
== osmo-remsim-bankd

The `osmo-remsim-bankd` (SIM Bank Daemon) manages one given SIM bank.
The initial implementation supports a PC/SC driver to expose any PC/SC
compatible card readers as SIM bank.

`osmo-remsim-bankd` initially connects via a RSPRO control connection to
`osmo-remsim-server` at startup, and will in turn receive a set of
initial [client,slot]:[bankd,slot] mappings.  These mappings determine
which slot on the client (corresponding to a modem) is mapped to which
slot on the SIM bank.  Mappings can be updated by `osmo-remsim-server`
at any given point in time.

`osmo-remsim-bankd` implements a RSPRO server, where it listens to
connections from `osmo-remsim-clients`.

As PC/SC only offers a blocking API, there is one thread per PC/SC slot.
This thread will perform blocking I/O on the socket towards the client,
and blocking API calls on PC/SC.

In terms of thread handling, we do:

* accept() handling in [spare] worker threads
** this means blocking I/O can be used, as each worker thread only has
   one TCP connection
** client identifies itself with client:slot
** lookup mapping based on client:slot (using mutex for protection)
** open the reader based on the lookup result

The worker threads initially don't have any mapping to a specific
reader, and that mapping is only established at a later point after the
client has identified itself.  The advantage is that the entire bankd
can live without any non-blocking I/O.

The main thread handles the connection to `osmo-remsim-server`, where it
can also use non-blocking I/O.  However, re-connection would be
required, to avoid stalling all banks/cards in the event of a connection
loss to the server.

worker threads have the following states:
* INIT (just started)
* ACCEPTING (they're blocking in the accept() call on the server socket fd)
* CONNECTED_WAIT_ID (TCP established, but peer not yet identified itself)
* CONNECTED_CLIENT (TCP established, client has identified itself, no mapping)
* CONNECTED_CLIENT_MAPPED (TCP established, client has identified itself, mapping exists)
* CONNECTED_CLIENT_MAPPED_CARD (TCP established, client identified, mapping exists, card opened)
* CONNECTED_SERVER (TCP established, server has identified itself)

Once the client disconnects, or any other error occurs (such as card I/O
errors), the worker thread either returns to INIT state (closing client
socket and reader), or it terminates.  Termination would mean that the
main thread would have to do non-blocking join to detect client
termination and then re-spawn clients, so the "return to INIT state"
approach seems to make more sense.


=== Running

`osmo-remsim-bankd` currently has the following command-line options:

==== SYNOPSIS

*osmo-remsim-bankd* [-h] [-V] [-d LOGOPT] [-i A.B.C.D] [-p <1-65535>] [-b <1-1023>] [-n <1-1023>] [-I A.B.C.D] [-P <1-65535> ]

==== OPTIONS

*-h, --help*::
  Print a short help message about the supported options
*-V, --version*::
  Print the software version number
*-d, --debug LOGOPT*::
  Configure the logging verbosity, see <<remsim_logging>>.
*-i, --server-host A.B.C.D*::
  Specify the remote IP address/hostname of the `osmo-remsim-server` to
  which this bankd shall establish its RSPRO control connection
*-p, --server-port <1-65535>*::
  Specify the remote TCP port number of the `osmo-remsim-server` to which
  this bankd shall establish its RSPRO control connection
*-b, --bank-id <1-1023>*::
  Specify the numeric bank identifier of the SIM bank this bankd
  instance operates.  Must be unique among all banks connecting to the
  same `osmo-remsim-server`.
*-n, --num-slots <1-1023>*::
  Specify the number of slots that this bankd handles.
*-I, --bind-IP A.B.C.D*::
  Specify the local IP address to which the socket for incoming connections
  from `osmo-remsim-clients` is bound to.
*-P, --bind-port <1-65535>*::
  Specify the local TCP port to which the socket for incoming connections
  from `osmo-remsim-client`s is bound to.

==== Examples
.remsim-server is on 10.2.3.4, cardreader has 5 slots:
----
osmo-remsim-bankd -i 10.2.3.4 -n 5
----
.remsim-server is on 10.2.3.4, cardreader has 4 slots, local ip is 10.5.4.3
----
osmo-remsim-bankd -i 10.2.3.4 -n 4 -I 10.5.4.3
----

=== Logging

`osmo-remsim-bankd` currently logs to stdout only, and the logging
verbosity is not yet configurable.  However, as the libosmocore logging
framework is used, extending this is an easy modification.

=== `bankd_pcsc_slots.csv` CSV file

bankd expects a CSV file `bankd_pcsc_slots.csv` in the current working directory at startup.

This CSV file specifies the mapping between the string names of the PCSC
readers and the RSPRO bandk/slot numbers.  The format is as follows:

* first column: bankd number
* second column: slot number within bankd
* third column: extended POSIX regular expression matching the slot

.Example: CSV file mapping bankd slots 0..4 to an ACS ACR33U-A1 reader slots
----
"1","0","ACS ACR33 ICC Reader 00 00"
"1","1","ACS ACR33 ICC Reader 00 01"
"1","2","ACS ACR33 ICC Reader 00 02"
"1","3","ACS ACR33 ICC Reader 00 03"
"1","4","ACS ACR33 ICC Reader 00 04"
----

You can obtain the exact string to use as PC/SC reader name from the output of the
`pcsc_scan` utility (part of pcsc-lite package).  The tool will produce output like:

.Example: Output of `pcsc_scan` utility on a system with a single reader installed
----
Scanning present readers...
0: Alcor Micro AU9560 00 00
----

In this example, there's only a single PC/SC reader available, and it has a string of
"Alcor Micro AU9560 00 00" which needs to be used in the CSV file.

NOTE:: If the reader name contains any special characters, they might need to be escaped according
to the extended POSIX regular expression syntax. See `man 7 regex` for a reference.

.Example: CSV file mapping bankd slots 0..7 to a sysmoOCTSIM:
----
"1","0","sysmocom sysmoOCTSIM \[CCID\] \(ab19180f3335355320202034463a15ff\) [0-9]{2} 00"
"1","1","sysmocom sysmoOCTSIM \[CCID\] \(ab19180f3335355320202034463a15ff\) [0-9]{2} 01"
"1","2","sysmocom sysmoOCTSIM \[CCID\] \(ab19180f3335355320202034463a15ff\) [0-9]{2} 02"
"1","3","sysmocom sysmoOCTSIM \[CCID\] \(ab19180f3335355320202034463a15ff\) [0-9]{2} 03"
"1","4","sysmocom sysmoOCTSIM \[CCID\] \(ab19180f3335355320202034463a15ff\) [0-9]{2} 04"
"1","5","sysmocom sysmoOCTSIM \[CCID\] \(ab19180f3335355320202034463a15ff\) [0-9]{2} 05"
"1","6","sysmocom sysmoOCTSIM \[CCID\] \(ab19180f3335355320202034463a15ff\) [0-9]{2} 06"
"1","7","sysmocom sysmoOCTSIM \[CCID\] \(ab19180f3335355320202034463a15ff\) [0-9]{2} 07"
----

In the above example, the +\[CCID\]+ and the +\(serialnumber\)+ both had to be escaped.

The +[0-9]\{2\}+ construct exists to perform wildcard matching, no matter which particular two-digit number
pcscd decides to use.