diff --git a/tests/alloc/AllocTest.ok b/tests/alloc/AllocTest.ok
index 5b3efa2..bfef737 100644
--- a/tests/alloc/AllocTest.ok
+++ b/tests/alloc/AllocTest.ok
@@ -5,1525 +5,1525 @@
 Going to test multislot assignment MS_CLASS=0
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=1
 Testing UL then DL assignment.
 PDCH[5] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 PDCH[5] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing jolly example
 PDCH[1] is used for UL
-PDCH[1] is control_ts for UL
-PDCH[1] is first common for UL
+PDCH(bts=0,trx=0,ts=1) is control_ts for UL
+PDCH(bts=0,trx=0,ts=1) is first common for UL
 PDCH[1] is used for DL
-PDCH[1] is control_ts for DL
-PDCH[1] is first common for DL
+PDCH(bts=0,trx=0,ts=1) is control_ts for DL
+PDCH(bts=0,trx=0,ts=1) is first common for DL
 Going to test multislot assignment MS_CLASS=2
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[2] is used for UL
-PDCH[2] is control_ts for UL
-PDCH[2] is first common for UL
+PDCH(bts=0,trx=0,ts=2) is control_ts for UL
+PDCH(bts=0,trx=0,ts=2) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
-PDCH[2] is control_ts for DL
-PDCH[2] is first common for DL
+PDCH(bts=0,trx=0,ts=2) is control_ts for DL
+PDCH(bts=0,trx=0,ts=2) is first common for DL
 Going to test multislot assignment MS_CLASS=3
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[2] is used for UL
-PDCH[2] is control_ts for UL
-PDCH[2] is first common for UL
+PDCH(bts=0,trx=0,ts=2) is control_ts for UL
+PDCH(bts=0,trx=0,ts=2) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
-PDCH[2] is control_ts for DL
-PDCH[2] is first common for DL
+PDCH(bts=0,trx=0,ts=2) is control_ts for DL
+PDCH(bts=0,trx=0,ts=2) is first common for DL
 Going to test multislot assignment MS_CLASS=4
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[2] is used for UL
-PDCH[2] is control_ts for UL
-PDCH[2] is first common for UL
+PDCH(bts=0,trx=0,ts=2) is control_ts for UL
+PDCH(bts=0,trx=0,ts=2) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
-PDCH[2] is control_ts for DL
-PDCH[2] is first common for DL
+PDCH(bts=0,trx=0,ts=2) is control_ts for DL
+PDCH(bts=0,trx=0,ts=2) is first common for DL
 Going to test multislot assignment MS_CLASS=5
 Testing UL then DL assignment.
 PDCH[5] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 PDCH[5] is used for UL
 PDCH[6] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing jolly example
 PDCH[1] is used for UL
 PDCH[2] is used for UL
-PDCH[1] is control_ts for UL
-PDCH[1] is first common for UL
+PDCH(bts=0,trx=0,ts=1) is control_ts for UL
+PDCH(bts=0,trx=0,ts=1) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
-PDCH[1] is control_ts for DL
-PDCH[1] is first common for DL
+PDCH(bts=0,trx=0,ts=1) is control_ts for DL
+PDCH(bts=0,trx=0,ts=1) is first common for DL
 Going to test multislot assignment MS_CLASS=6
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[2] is used for UL
-PDCH[2] is control_ts for UL
-PDCH[2] is first common for UL
+PDCH(bts=0,trx=0,ts=2) is control_ts for UL
+PDCH(bts=0,trx=0,ts=2) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
-PDCH[2] is control_ts for DL
-PDCH[2] is first common for DL
+PDCH(bts=0,trx=0,ts=2) is control_ts for DL
+PDCH(bts=0,trx=0,ts=2) is first common for DL
 Going to test multislot assignment MS_CLASS=7
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[2] is used for UL
-PDCH[2] is control_ts for UL
-PDCH[2] is first common for UL
+PDCH(bts=0,trx=0,ts=2) is control_ts for UL
+PDCH(bts=0,trx=0,ts=2) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
-PDCH[2] is control_ts for DL
-PDCH[2] is first common for DL
+PDCH(bts=0,trx=0,ts=2) is control_ts for DL
+PDCH(bts=0,trx=0,ts=2) is first common for DL
 Going to test multislot assignment MS_CLASS=8
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=9
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[2] is used for UL
 PDCH[3] is used for UL
-PDCH[2] is control_ts for UL
-PDCH[2] is first common for UL
+PDCH(bts=0,trx=0,ts=2) is control_ts for UL
+PDCH(bts=0,trx=0,ts=2) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
-PDCH[2] is control_ts for DL
-PDCH[2] is first common for DL
+PDCH(bts=0,trx=0,ts=2) is control_ts for DL
+PDCH(bts=0,trx=0,ts=2) is first common for DL
 Going to test multislot assignment MS_CLASS=10
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=11
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=12
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=13
 Testing UL then DL assignment.
 PDCH[5] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 PDCH[5] is used for UL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing jolly example
 PDCH[1] is used for UL
 PDCH[2] is used for UL
 PDCH[3] is used for UL
-PDCH[1] is control_ts for UL
-PDCH[1] is first common for UL
+PDCH(bts=0,trx=0,ts=1) is control_ts for UL
+PDCH(bts=0,trx=0,ts=1) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
-PDCH[1] is control_ts for DL
-PDCH[1] is first common for DL
+PDCH(bts=0,trx=0,ts=1) is control_ts for DL
+PDCH(bts=0,trx=0,ts=1) is first common for DL
 Going to test multislot assignment MS_CLASS=14
 Testing UL then DL assignment.
 PDCH[5] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 PDCH[5] is used for UL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing jolly example
 PDCH[1] is used for UL
 PDCH[2] is used for UL
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[1] is control_ts for UL
-PDCH[1] is first common for UL
+PDCH(bts=0,trx=0,ts=1) is control_ts for UL
+PDCH(bts=0,trx=0,ts=1) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[1] is control_ts for DL
-PDCH[1] is first common for DL
+PDCH(bts=0,trx=0,ts=1) is control_ts for DL
+PDCH(bts=0,trx=0,ts=1) is first common for DL
 Going to test multislot assignment MS_CLASS=15
 Testing UL then DL assignment.
 PDCH[5] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 PDCH[5] is used for UL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing jolly example
 PDCH[1] is used for UL
 PDCH[2] is used for UL
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[1] is control_ts for UL
-PDCH[1] is first common for UL
+PDCH(bts=0,trx=0,ts=1) is control_ts for UL
+PDCH(bts=0,trx=0,ts=1) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[1] is control_ts for DL
-PDCH[1] is first common for DL
+PDCH(bts=0,trx=0,ts=1) is control_ts for DL
+PDCH(bts=0,trx=0,ts=1) is first common for DL
 Going to test multislot assignment MS_CLASS=16
 Testing UL then DL assignment.
 PDCH[5] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 PDCH[5] is used for UL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing jolly example
 PDCH[1] is used for UL
 PDCH[2] is used for UL
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[1] is control_ts for UL
-PDCH[1] is first common for UL
+PDCH(bts=0,trx=0,ts=1) is control_ts for UL
+PDCH(bts=0,trx=0,ts=1) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[1] is control_ts for DL
-PDCH[1] is first common for DL
+PDCH(bts=0,trx=0,ts=1) is control_ts for DL
+PDCH(bts=0,trx=0,ts=1) is first common for DL
 Going to test multislot assignment MS_CLASS=17
 Testing UL then DL assignment.
 PDCH[5] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 PDCH[5] is used for UL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing jolly example
 PDCH[1] is used for UL
 PDCH[2] is used for UL
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[1] is control_ts for UL
-PDCH[1] is first common for UL
+PDCH(bts=0,trx=0,ts=1) is control_ts for UL
+PDCH(bts=0,trx=0,ts=1) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[1] is control_ts for DL
-PDCH[1] is first common for DL
+PDCH(bts=0,trx=0,ts=1) is control_ts for DL
+PDCH(bts=0,trx=0,ts=1) is first common for DL
 Going to test multislot assignment MS_CLASS=18
 Testing UL then DL assignment.
 PDCH[5] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[5] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 PDCH[5] is used for UL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[5] is control_ts for UL
-PDCH[5] is first common for UL
+PDCH(bts=0,trx=0,ts=5) is control_ts for UL
+PDCH(bts=0,trx=0,ts=5) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[5] is control_ts for DL
-PDCH[5] is first common for DL
+PDCH(bts=0,trx=0,ts=5) is control_ts for DL
+PDCH(bts=0,trx=0,ts=5) is first common for DL
 Testing jolly example
 PDCH[1] is used for UL
 PDCH[2] is used for UL
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[1] is control_ts for UL
-PDCH[1] is first common for UL
+PDCH(bts=0,trx=0,ts=1) is control_ts for UL
+PDCH(bts=0,trx=0,ts=1) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[1] is control_ts for DL
-PDCH[1] is first common for DL
+PDCH(bts=0,trx=0,ts=1) is control_ts for DL
+PDCH(bts=0,trx=0,ts=1) is first common for DL
 Going to test multislot assignment MS_CLASS=19
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=20
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=21
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=22
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=23
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=24
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=25
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=26
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=27
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=28
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=29
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=30
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=31
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=32
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=33
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=34
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=35
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=36
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=37
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=38
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=39
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=40
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=41
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=42
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=43
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=44
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Going to test multislot assignment MS_CLASS=45
 Testing UL then DL assignment.
 PDCH[6] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing DL then UL assignment followed by update
 PDCH[6] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 PDCH[6] is used for UL
 PDCH[7] is used for UL
-PDCH[6] is control_ts for UL
-PDCH[6] is first common for UL
+PDCH(bts=0,trx=0,ts=6) is control_ts for UL
+PDCH(bts=0,trx=0,ts=6) is first common for UL
 PDCH[5] is used for DL
 PDCH[6] is used for DL
 PDCH[7] is used for DL
-PDCH[6] is control_ts for DL
-PDCH[6] is first common for DL
+PDCH(bts=0,trx=0,ts=6) is control_ts for DL
+PDCH(bts=0,trx=0,ts=6) is first common for DL
 Testing jolly example
 PDCH[3] is used for UL
 PDCH[4] is used for UL
-PDCH[3] is control_ts for UL
-PDCH[3] is first common for UL
+PDCH(bts=0,trx=0,ts=3) is control_ts for UL
+PDCH(bts=0,trx=0,ts=3) is first common for UL
 PDCH[1] is used for DL
 PDCH[2] is used for DL
 PDCH[3] is used for DL
 PDCH[4] is used for DL
-PDCH[3] is control_ts for DL
-PDCH[3] is first common for DL
+PDCH(bts=0,trx=0,ts=3) is control_ts for DL
+PDCH(bts=0,trx=0,ts=3) is first common for DL
 Mass test: TS0(xxxxxxxO)TS7 MS_Class=0
 Mass test: TS0(xxxxxxxO)TS7 MS_Class=1
 Mass test: TS0(xxxxxxxO)TS7 MS_Class=2