bts: fix send_gsmtap_rach(): properly pack 11 bit RA
According to 3GPP TS 44.004, section 7.4a, two alternative RACH
block formats are specified: 8 bit (1 octet) and 11 bit. The
bit order is LSB (right to left), byte order is MSB.
In PCUIF RACH.ind structure (see gsm_pcu_if_rach_ind) we use
a field of type uint16_t to store RA values regardles of the
block format. Thus when packing it to bytes, we cannot just
cast uint16_t* to uint8_t*, we need to do some bit shifting.
Change-Id: I08a0a908f855b0d8a002df732e02781126d27dfb
diff --git a/src/bts.cpp b/src/bts.cpp
index 0482168..617cd78 100644
--- a/src/bts.cpp
+++ b/src/bts.cpp
@@ -434,9 +434,21 @@
const struct rach_ind_params *rip)
{
struct pcu_l1_meas meas;
+ uint8_t ra_buf[2];
+
+ /* 3GPP TS 44.004 defines 11 bit RA as follows: xxxx xxxx .... .yyy
+ * On the PCUIF, we get 16 bit machne dependent number (LE/BE)
+ * Over GSMTAP we send the following: xxxx xxxx yyy. ....
+ * This simplifies parsing in Wireshark using its CSN.1 codec. */
+ if (rip->is_11bit) {
+ ra_buf[0] = (uint8_t) ((rip->ra >> 3) & 0xff);
+ ra_buf[1] = (uint8_t) ((rip->ra << 5) & 0xff);
+ } else {
+ ra_buf[0] = (uint8_t) (rip->ra & 0xff);
+ }
+
send_gsmtap_meas(categ, true, rip->trx_nr, rip->ts_nr, channel,
- rfn_to_fn(rip->rfn), (uint8_t *) &rip->ra,
- /* TODO: properly pack 11 bit RA */
+ rfn_to_fn(rip->rfn), ra_buf,
rip->is_11bit ? 2 : 1, &meas);
}