| commit | 434799720ca326083b16ef9da5d9fc6823d29bba | [log] [tgz] |
|---|---|---|
| author | Pau Espin Pedrol <pespin@sysmocom.de> | Thu Apr 22 19:18:13 2021 +0200 |
| committer | Pau Espin Pedrol <pespin@sysmocom.de> | Thu Apr 22 20:28:40 2021 +0200 |
| tree | 5300e22f1db5b179409f92f8f96d62c0ea61e2a5 | |
| parent | ffc533b1af0f44c1716f97479ae20f0d39de6984 [diff] |
pdch: rcv_resource_request: Improve robustness Use recently added PDCH UL Controller to verify expectancies. Test test_packet_access_rej_prr is rewritten since it didn't make sense as it was before, since it relied on osmo-pcu not checking stuff properly to trigger the reject. The RACH requests are changed to allocate 8 SBAs (maximum of 7 concurrent USFs). Allocating the SBA doesn't reserve a USF, that happens at PKT RESOURCE REQUEST, hence we end up exhausting resources there and triggering the REJECT at that point. Previous version of the patch allocated TBFs directly through RACH req, and then submitted an extra PKT RESOURCE REQUEST which PCU didn't expect to trigger the reject. Change-Id: I157e72160317340ee7742c78c62a25d3d98fc01e
This repository contains a C/C++-language implementation of a GPRS Packet Control Unit, as specified by ETSI/3GPP. It is part of the Osmocom Open Source Mobile Communications project.
The Packet Control Unit is terminating the Layer 2 (RLC/MAC) of the GPRS radio interface and adapting it to the Gb Interface (BSSGP+NS Protocol) towards the SGSN.
The PCU interfaces with the physical layer of the radio interface. OsmoPCU is typically used co-located with the BTS, specifically OsmoBTS. For legacy BTSs that run proprietary sotware without an interface to OsmoPCU, you may also co-locate it with the BSC, specifically OsmoBSC
The official homepage of the project is https://osmocom.org/projects/osmopcu/wiki/OsmoPCU
You can clone from the official osmo-pcu.git repository using
git clone git://git.osmocom.org/osmo-pcu.git
There is a cgit interface at http://git.osmocom.org/osmo-pcu/
We provide a user manual as well as a vty reference manual
Please note that a lot of the PCU configuration actually happens inside the BSC, which passes this configuration via A-bis OML to the BTS, which then in turn passes it via the PCU socket into OsmoPCU.
Discussions related to osmo-pcu are happening on the osmocom-net-gprs@lists.osmocom.org mailing list, please see https://lists.osmocom.org/mailman/listinfo/osmocom-net-gprs for subscription options and the list archive.
Please observe the Osmocom Mailing List Rules when posting.
Our coding standards are described at https://osmocom.org/projects/cellular-infrastructure/wiki/Coding_standards
We us a gerrit based patch submission/review process for managing contributions. Please see https://osmocom.org/projects/cellular-infrastructure/wiki/Gerrit for more details
The current patch queue for osmo-pcu can be seen at https://gerrit.osmocom.org/#/q/project:osmo-pcu+status:open