| commit | 28f160e76c3c53029bc6e8de101b2d7ee26eea16 | [log] [tgz] |
|---|---|---|
| author | Pau Espin Pedrol <pespin@sysmocom.de> | Thu Sep 05 14:48:35 2019 +0200 |
| committer | Pau Espin Pedrol <pespin@sysmocom.de> | Thu Sep 12 14:17:07 2019 +0200 |
| tree | 53ba9a527bda9de647d77c70803d092db0613aec | |
| parent | 45fdc44d683365b806b90e694cb7b960dc967b31 [diff] |
Introduce osmo_tdef infra and timer VTY commands This will allow for configuration of some of the timers by the user, and allow him to inspect current values being used. It will be also useful for TTCN3 tests which may want to test some of the timers without having to wait for lots of time. Timers are splitted into 2 groups: BTS controlled ones and PCU controlled ones. The BTS controlled ones are read-only by the user (hence no "timer" VTY command is provided to change them). TbfTest.err output changes due to timers being set up correctly as a consequence of changes. Other application such as pcu_emu.cpp and pcu_main.cpp had to previosuly set the initial values by hand (and did so), but apparently TbfTest.c was missing that part, which is now fixed for free. Depends: libosmocore.git Id56a1226d724a374f04231df85fe5b49ffd2c43c Change-Id: I5cfb9ef01706124be262d4536617b9edb4601dd5
This repository contains a C/C++-language implementation of a GPRS Packet Control Unit, as specified by ETSI/3GPP. It is part of the Osmocom Open Source Mobile Communications project.
The Packet Control Unit is terminating the Layer 2 (RLC/MAC) of the GPRS radio interface and adapting it to the Gb Interface (BSSGP+NS Protocol) towards the SGSN.
The PCU interfaces with the physical layer of the radio interface. OsmoPCU is typically used co-located with the BTS, specifically OsmoBTS. For legacy BTSs that run proprietary sotware without an interface to OsmoPCU, you may also co-locate it with the BSC, specifically OsmoBSC
The official homepage of the project is https://osmocom.org/projects/osmopcu/wiki/OsmoPCU
You can clone from the official osmo-pcu.git repository using
git clone git://git.osmocom.org/osmo-pcu.git
There is a cgit interface at http://git.osmocom.org/osmo-pcu/
We provide a user manual as well as a vty reference manual
Please note that a lot of the PCU configuration actually happens inside the BSC, which passes this configuration via A-bis OML to the BTS, which then in turn passes it via the PCU socket into OsmoPCU.
Discussions related to osmo-pcu are happening on the osmocom-net-gprs@lists.osmocom.org mailing list, please see https://lists.osmocom.org/mailman/listinfo/osmocom-net-gprs for subscription options and the list archive.
Please observe the Osmocom Mailing List Rules when posting.
Our coding standards are described at https://osmocom.org/projects/cellular-infrastructure/wiki/Coding_standards
We us a gerrit based patch submission/review process for managing contributions. Please see https://osmocom.org/projects/cellular-infrastructure/wiki/Gerrit for more details
The current patch queue for osmo-pcu can be seen at https://gerrit.osmocom.org/#/q/project:osmo-pcu+status:open