diff --git a/include/osmocore/linuxlist.h b/include/osmocore/linuxlist.h
new file mode 100644
index 0000000..fb99c5e
--- /dev/null
+++ b/include/osmocore/linuxlist.h
@@ -0,0 +1,360 @@
+#ifndef _LINUX_LLIST_H
+#define _LINUX_LLIST_H
+
+#include <stddef.h>
+
+#ifndef inline
+#define inline __inline__
+#endif
+
+static inline void prefetch(const void *x) {;}
+
+/**
+ * container_of - cast a member of a structure out to the containing structure
+ *
+ * @ptr:	the pointer to the member.
+ * @type:	the type of the container struct this is embedded in.
+ * @member:	the name of the member within the struct.
+ *
+ */
+#define container_of(ptr, type, member) ({			\
+        const typeof( ((type *)0)->member ) *__mptr = (typeof( ((type *)0)->member ) *)(ptr);	\
+        (type *)( (char *)__mptr - offsetof(type, member) );})
+
+
+/*
+ * These are non-NULL pointers that will result in page faults
+ * under normal circumstances, used to verify that nobody uses
+ * non-initialized llist entries.
+ */
+#define LLIST_POISON1  ((void *) 0x00100100)
+#define LLIST_POISON2  ((void *) 0x00200200)
+
+/*
+ * Simple doubly linked llist implementation.
+ *
+ * Some of the internal functions ("__xxx") are useful when
+ * manipulating whole llists rather than single entries, as
+ * sometimes we already know the next/prev entries and we can
+ * generate better code by using them directly rather than
+ * using the generic single-entry routines.
+ */
+
+struct llist_head {
+	struct llist_head *next, *prev;
+};
+
+#define LLIST_HEAD_INIT(name) { &(name), &(name) }
+
+#define LLIST_HEAD(name) \
+	struct llist_head name = LLIST_HEAD_INIT(name)
+
+#define INIT_LLIST_HEAD(ptr) do { \
+	(ptr)->next = (ptr); (ptr)->prev = (ptr); \
+} while (0)
+
+/*
+ * Insert a new entry between two known consecutive entries. 
+ *
+ * This is only for internal llist manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __llist_add(struct llist_head *_new,
+			      struct llist_head *prev,
+			      struct llist_head *next)
+{
+	next->prev = _new;
+	_new->next = next;
+	_new->prev = prev;
+	prev->next = _new;
+}
+
+/**
+ * llist_add - add a new entry
+ * @new: new entry to be added
+ * @head: llist head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
+static inline void llist_add(struct llist_head *_new, struct llist_head *head)
+{
+	__llist_add(_new, head, head->next);
+}
+
+/**
+ * llist_add_tail - add a new entry
+ * @new: new entry to be added
+ * @head: llist head to add it before
+ *
+ * Insert a new entry before the specified head.
+ * This is useful for implementing queues.
+ */
+static inline void llist_add_tail(struct llist_head *_new, struct llist_head *head)
+{
+	__llist_add(_new, head->prev, head);
+}
+
+/*
+ * Delete a llist entry by making the prev/next entries
+ * point to each other.
+ *
+ * This is only for internal llist manipulation where we know
+ * the prev/next entries already!
+ */
+static inline void __llist_del(struct llist_head * prev, struct llist_head * next)
+{
+	next->prev = prev;
+	prev->next = next;
+}
+
+/**
+ * llist_del - deletes entry from llist.
+ * @entry: the element to delete from the llist.
+ * Note: llist_empty on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
+static inline void llist_del(struct llist_head *entry)
+{
+	__llist_del(entry->prev, entry->next);
+	entry->next = (struct llist_head *)LLIST_POISON1;
+	entry->prev = (struct llist_head *)LLIST_POISON2;
+}
+
+/**
+ * llist_del_init - deletes entry from llist and reinitialize it.
+ * @entry: the element to delete from the llist.
+ */
+static inline void llist_del_init(struct llist_head *entry)
+{
+	__llist_del(entry->prev, entry->next);
+	INIT_LLIST_HEAD(entry); 
+}
+
+/**
+ * llist_move - delete from one llist and add as another's head
+ * @llist: the entry to move
+ * @head: the head that will precede our entry
+ */
+static inline void llist_move(struct llist_head *llist, struct llist_head *head)
+{
+        __llist_del(llist->prev, llist->next);
+        llist_add(llist, head);
+}
+
+/**
+ * llist_move_tail - delete from one llist and add as another's tail
+ * @llist: the entry to move
+ * @head: the head that will follow our entry
+ */
+static inline void llist_move_tail(struct llist_head *llist,
+				  struct llist_head *head)
+{
+        __llist_del(llist->prev, llist->next);
+        llist_add_tail(llist, head);
+}
+
+/**
+ * llist_empty - tests whether a llist is empty
+ * @head: the llist to test.
+ */
+static inline int llist_empty(const struct llist_head *head)
+{
+	return head->next == head;
+}
+
+static inline void __llist_splice(struct llist_head *llist,
+				 struct llist_head *head)
+{
+	struct llist_head *first = llist->next;
+	struct llist_head *last = llist->prev;
+	struct llist_head *at = head->next;
+
+	first->prev = head;
+	head->next = first;
+
+	last->next = at;
+	at->prev = last;
+}
+
+/**
+ * llist_splice - join two llists
+ * @llist: the new llist to add.
+ * @head: the place to add it in the first llist.
+ */
+static inline void llist_splice(struct llist_head *llist, struct llist_head *head)
+{
+	if (!llist_empty(llist))
+		__llist_splice(llist, head);
+}
+
+/**
+ * llist_splice_init - join two llists and reinitialise the emptied llist.
+ * @llist: the new llist to add.
+ * @head: the place to add it in the first llist.
+ *
+ * The llist at @llist is reinitialised
+ */
+static inline void llist_splice_init(struct llist_head *llist,
+				    struct llist_head *head)
+{
+	if (!llist_empty(llist)) {
+		__llist_splice(llist, head);
+		INIT_LLIST_HEAD(llist);
+	}
+}
+
+/**
+ * llist_entry - get the struct for this entry
+ * @ptr:	the &struct llist_head pointer.
+ * @type:	the type of the struct this is embedded in.
+ * @member:	the name of the llist_struct within the struct.
+ */
+#define llist_entry(ptr, type, member) \
+	container_of(ptr, type, member)
+
+/**
+ * llist_for_each	-	iterate over a llist
+ * @pos:	the &struct llist_head to use as a loop counter.
+ * @head:	the head for your llist.
+ */
+#define llist_for_each(pos, head) \
+	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+        	pos = pos->next, prefetch(pos->next))
+
+/**
+ * __llist_for_each	-	iterate over a llist
+ * @pos:	the &struct llist_head to use as a loop counter.
+ * @head:	the head for your llist.
+ *
+ * This variant differs from llist_for_each() in that it's the
+ * simplest possible llist iteration code, no prefetching is done.
+ * Use this for code that knows the llist to be very short (empty
+ * or 1 entry) most of the time.
+ */
+#define __llist_for_each(pos, head) \
+	for (pos = (head)->next; pos != (head); pos = pos->next)
+
+/**
+ * llist_for_each_prev	-	iterate over a llist backwards
+ * @pos:	the &struct llist_head to use as a loop counter.
+ * @head:	the head for your llist.
+ */
+#define llist_for_each_prev(pos, head) \
+	for (pos = (head)->prev, prefetch(pos->prev); pos != (head); \
+        	pos = pos->prev, prefetch(pos->prev))
+        	
+/**
+ * llist_for_each_safe	-	iterate over a llist safe against removal of llist entry
+ * @pos:	the &struct llist_head to use as a loop counter.
+ * @n:		another &struct llist_head to use as temporary storage
+ * @head:	the head for your llist.
+ */
+#define llist_for_each_safe(pos, n, head) \
+	for (pos = (head)->next, n = pos->next; pos != (head); \
+		pos = n, n = pos->next)
+
+/**
+ * llist_for_each_entry	-	iterate over llist of given type
+ * @pos:	the type * to use as a loop counter.
+ * @head:	the head for your llist.
+ * @member:	the name of the llist_struct within the struct.
+ */
+#define llist_for_each_entry(pos, head, member)				\
+	for (pos = llist_entry((head)->next, typeof(*pos), member),	\
+		     prefetch(pos->member.next);			\
+	     &pos->member != (head); 					\
+	     pos = llist_entry(pos->member.next, typeof(*pos), member),	\
+		     prefetch(pos->member.next))
+
+/**
+ * llist_for_each_entry_reverse - iterate backwards over llist of given type.
+ * @pos:	the type * to use as a loop counter.
+ * @head:	the head for your llist.
+ * @member:	the name of the llist_struct within the struct.
+ */
+#define llist_for_each_entry_reverse(pos, head, member)			\
+	for (pos = llist_entry((head)->prev, typeof(*pos), member),	\
+		     prefetch(pos->member.prev);			\
+	     &pos->member != (head); 					\
+	     pos = llist_entry(pos->member.prev, typeof(*pos), member),	\
+		     prefetch(pos->member.prev))
+
+/**
+ * llist_for_each_entry_continue -	iterate over llist of given type
+ *			continuing after existing point
+ * @pos:	the type * to use as a loop counter.
+ * @head:	the head for your llist.
+ * @member:	the name of the llist_struct within the struct.
+ */
+#define llist_for_each_entry_continue(pos, head, member) 		\
+	for (pos = llist_entry(pos->member.next, typeof(*pos), member),	\
+		     prefetch(pos->member.next);			\
+	     &pos->member != (head);					\
+	     pos = llist_entry(pos->member.next, typeof(*pos), member),	\
+		     prefetch(pos->member.next))
+
+/**
+ * llist_for_each_entry_safe - iterate over llist of given type safe against removal of llist entry
+ * @pos:	the type * to use as a loop counter.
+ * @n:		another type * to use as temporary storage
+ * @head:	the head for your llist.
+ * @member:	the name of the llist_struct within the struct.
+ */
+#define llist_for_each_entry_safe(pos, n, head, member)			\
+	for (pos = llist_entry((head)->next, typeof(*pos), member),	\
+		n = llist_entry(pos->member.next, typeof(*pos), member);	\
+	     &pos->member != (head); 					\
+	     pos = n, n = llist_entry(n->member.next, typeof(*n), member))
+
+/**
+ * llist_for_each_rcu	-	iterate over an rcu-protected llist
+ * @pos:	the &struct llist_head to use as a loop counter.
+ * @head:	the head for your llist.
+ */
+#define llist_for_each_rcu(pos, head) \
+	for (pos = (head)->next, prefetch(pos->next); pos != (head); \
+        	pos = pos->next, ({ smp_read_barrier_depends(); 0;}), prefetch(pos->next))
+        	
+#define __llist_for_each_rcu(pos, head) \
+	for (pos = (head)->next; pos != (head); \
+        	pos = pos->next, ({ smp_read_barrier_depends(); 0;}))
+        	
+/**
+ * llist_for_each_safe_rcu	-	iterate over an rcu-protected llist safe
+ *					against removal of llist entry
+ * @pos:	the &struct llist_head to use as a loop counter.
+ * @n:		another &struct llist_head to use as temporary storage
+ * @head:	the head for your llist.
+ */
+#define llist_for_each_safe_rcu(pos, n, head) \
+	for (pos = (head)->next, n = pos->next; pos != (head); \
+		pos = n, ({ smp_read_barrier_depends(); 0;}), n = pos->next)
+
+/**
+ * llist_for_each_entry_rcu	-	iterate over rcu llist of given type
+ * @pos:	the type * to use as a loop counter.
+ * @head:	the head for your llist.
+ * @member:	the name of the llist_struct within the struct.
+ */
+#define llist_for_each_entry_rcu(pos, head, member)			\
+	for (pos = llist_entry((head)->next, typeof(*pos), member),	\
+		     prefetch(pos->member.next);			\
+	     &pos->member != (head); 					\
+	     pos = llist_entry(pos->member.next, typeof(*pos), member),	\
+		     ({ smp_read_barrier_depends(); 0;}),		\
+		     prefetch(pos->member.next))
+
+
+/**
+ * llist_for_each_continue_rcu	-	iterate over an rcu-protected llist 
+ *			continuing after existing point.
+ * @pos:	the &struct llist_head to use as a loop counter.
+ * @head:	the head for your llist.
+ */
+#define llist_for_each_continue_rcu(pos, head) \
+	for ((pos) = (pos)->next, prefetch((pos)->next); (pos) != (head); \
+        	(pos) = (pos)->next, ({ smp_read_barrier_depends(); 0;}), prefetch((pos)->next))
+
+
+#endif