mscsplit: various preparations to separate MSC from BSC
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
diff --git a/src/libmsc/silent_call.c b/src/libmsc/silent_call.c
index 6f3fbf2..5fad4f4 100644
--- a/src/libmsc/silent_call.c
+++ b/src/libmsc/silent_call.c
@@ -52,8 +52,12 @@
switch (event) {
case GSM_PAGING_SUCCEEDED:
+#if BEFORE_MSCSPLIT
+ /* Re-enable this log output once we can obtain this information via
+ * A-interface, see OS#2391. */
DEBUGPC(DLSMS, "success, using Timeslot %u on ARFCN %u\n",
conn->lchan->ts->nr, conn->lchan->ts->trx->arfcn);
+#endif
conn->silent_call = 1;
msc_subscr_conn_get(conn);
/* increment lchan reference count */
@@ -126,7 +130,10 @@
{
struct subscr_request *req;
- req = subscr_request_channel(vsub, type, paging_cb_silent, data);
+ /* FIXME the VTY command allows selecting a silent call channel type.
+ * This doesn't apply to the situation after MSCSPLIT with an
+ * A-interface. */
+ req = subscr_request_conn(vsub, type, paging_cb_silent, data);
return req != NULL;
}
@@ -143,8 +150,12 @@
if (!conn->silent_call)
return -EINVAL;
+#if BEFORE_MSCSPLIT
+ /* Re-enable this log output once we can obtain this information via
+ * A-interface, see OS#2391. */
DEBUGPC(DLSMS, "Stopping silent call using Timeslot %u on ARFCN %u\n",
conn->lchan->ts->nr, conn->lchan->ts->trx->arfcn);
+#endif
conn->silent_call = 0;
msc_subscr_conn_put(conn);