mscsplit: various preparations to separate MSC from BSC
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
diff --git a/src/libcommon/gsm_data.c b/src/libcommon/gsm_data.c
index 7c717a4..f6fde37 100644
--- a/src/libcommon/gsm_data.c
+++ b/src/libcommon/gsm_data.c
@@ -71,25 +71,6 @@
return 0;
}
-/* Get reference to a neighbor cell on a given BCCH ARFCN */
-struct gsm_bts *gsm_bts_neighbor(const struct gsm_bts *bts,
- uint16_t arfcn, uint8_t bsic)
-{
- struct gsm_bts *neigh;
- /* FIXME: use some better heuristics here to determine which cell
- * using this ARFCN really is closest to the target cell. For
- * now we simply assume that each ARFCN will only be used by one
- * cell */
-
- llist_for_each_entry(neigh, &bts->network->bts_list, list) {
- if (neigh->c0->arfcn == arfcn &&
- neigh->bsic == bsic)
- return neigh;
- }
-
- return NULL;
-}
-
const struct value_string bts_type_descs[_NUM_GSM_BTS_TYPE+1] = {
{ GSM_BTS_TYPE_UNKNOWN, "Unknown BTS Type" },
{ GSM_BTS_TYPE_BS11, "Siemens BTS (BS-11 or compatible)" },
@@ -210,19 +191,6 @@
return 1;
}
-struct gsm_meas_rep *lchan_next_meas_rep(struct gsm_lchan *lchan)
-{
- struct gsm_meas_rep *meas_rep;
-
- meas_rep = &lchan->meas_rep[lchan->meas_rep_idx];
- memset(meas_rep, 0, sizeof(*meas_rep));
- meas_rep->lchan = lchan;
- lchan->meas_rep_idx = (lchan->meas_rep_idx + 1)
- % ARRAY_SIZE(lchan->meas_rep);
-
- return meas_rep;
-}
-
int gsm_btsmodel_set_feature(struct gsm_bts_model *model, enum gsm_bts_features feat)
{
OSMO_ASSERT(_NUM_BTS_FEAT < MAX_BTS_FEATURES);
@@ -322,7 +290,7 @@
bts->si_common.chan_desc.att = 1; /* attachment required */
bts->si_common.chan_desc.bs_pa_mfrms = RSL_BS_PA_MFRMS_5; /* paging frames */
bts->si_common.chan_desc.bs_ag_blks_res = 1; /* reserved AGCH blocks */
- bts->si_common.chan_desc.t3212 = 5; /* Use 30 min periodic update interval as sane default */
+ bts->si_common.chan_desc.t3212 = net->t3212; /* Use network's current value */
gsm_bts_set_radio_link_timeout(bts, 32); /* Use RADIO LINK TIMEOUT of 32 */
llist_add_tail(&bts->list, &net->bts_list);