vty: allow configuring db path from cfg file
So far, the cmdline argument was the only way to set a database file.
Add a similar config to VTY as 'msc' / 'sms-database'. The cmdline arg is stronger
than the 'database' cfg item. DB is not reloaded from VTY command.
Change-Id: I18d954c30fcceb0b36a620b927fd3a93dcc79f49
diff --git a/tests/msc_vlr/msc_vlr_test_umts_authen.err b/tests/msc_vlr/msc_vlr_test_umts_authen.err
index 7f345a1..42ed422 100644
--- a/tests/msc_vlr/msc_vlr_test_umts_authen.err
+++ b/tests/msc_vlr/msc_vlr_test_umts_authen.err
@@ -1,6 +1,6 @@
DLMGCP MGCP client: using endpoint domain '@mgw'
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -608,7 +608,7 @@
===== test_umts_authen_geran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_utran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -1216,7 +1216,7 @@
===== test_umts_authen_utran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_auth_ciph_utran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -1848,7 +1848,7 @@
===== test_umts_auth_ciph_utran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_resync_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -2082,7 +2082,7 @@
===== test_umts_authen_resync_geran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_resync_utran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -2316,7 +2316,7 @@
===== test_umts_authen_resync_utran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_auth_ciph_resync_utran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -2560,7 +2560,7 @@
===== test_umts_auth_ciph_resync_utran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_too_short_res_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -2678,7 +2678,7 @@
===== test_umts_authen_too_short_res_geran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_too_short_res_utran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -2796,7 +2796,7 @@
===== test_umts_authen_too_short_res_utran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_too_long_res_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -2914,7 +2914,7 @@
===== test_umts_authen_too_long_res_geran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_too_long_res_utran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -3032,7 +3032,7 @@
===== test_umts_authen_too_long_res_utran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_only_sres_geran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -3150,7 +3150,7 @@
===== test_umts_authen_only_sres_geran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
===== test_umts_authen_only_sres_utran
- Location Update request causes a GSUP Send Auth Info request to HLR
@@ -3268,8 +3268,8 @@
===== test_umts_authen_only_sres_utran: SUCCESS
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21
full talloc report on 'msgb' (total 0 bytes in 1 blocks)
-talloc_total_blocks(tall_bsc_ctx) == 20
+talloc_total_blocks(tall_bsc_ctx) == 21