diff --git a/doc/sequence_charts/msc_log_to_ladder.py b/doc/sequence_charts/msc_log_to_ladder.py
index 30b6594..9bfb9c9 100755
--- a/doc/sequence_charts/msc_log_to_ladder.py
+++ b/doc/sequence_charts/msc_log_to_ladder.py
@@ -53,7 +53,7 @@
 MS_UE_UNKNOWN = 'ms' #None
 MSC = 'msc'
 MGW = 'mgw'
-SIP = 'sip'
+MNCC = 'mncc'
 
 MO = 'mo'
 MT = 'mt'
@@ -69,7 +69,7 @@
 			self.start_with_re = re.compile(start_with_re)
 
 	def head(self):
-		self.writeln('# Generated by msc_log_to_ladder.py')
+		self.writeln('# Generated by osmo-msc.git/doc/sequence_charts/msc_log_to_ladder.py')
 
 	def tail(self):
 		pass
@@ -129,7 +129,7 @@
 		mo_mt = arrow.mo_mt or MO
 
 		def prepend_mo_mt(name):
-			if name in ('.', SIP):
+			if name in ('.', MNCC):
 				return name
 			return '%s%s' % (mo_mt, name)
 
@@ -222,7 +222,7 @@
 		mo_mt = arrow.mo_mt or MO
 
 		def prepend_mo_mt(name):
-			if name in ('.', SIP):
+			if name in ('.', MNCC):
 				return name
 			return '%s%s' % (mo_mt, name)
 
@@ -371,6 +371,7 @@
 		self.output = output
 		self.linenr = 0
 		self.rules = []
+		self.rules_hit = {}
 		self.seen_udtrace_mncc = False
 
 		self.callrefs_mo_mt = {}
@@ -390,6 +391,7 @@
 			re_str = docstr.splitlines()[0]
 
 			self.rules.append(Rule(name=member, re_str=re_str, handler=func))
+			self.rules_hit[member] = 0
 
 
 
@@ -403,7 +405,7 @@
 				#('moue', 'UE,hNodeB (MO)'),
 				('momgw', 'MGW for MSC (MO)'),
 				('momsc', 'MSC (MO)'),
-				('sip', 'MNCC to PBX via\nosmo-sip-connector'),
+				('mncc', 'MNCC'),
 				('mtmsc', 'MSC (MT)'),
 				('mtmgw', 'MGW for MSC (MT)'),
 				('mtms', 'BSS,MS (MT)\\nhNodeB,UE (MT)'),
@@ -448,6 +450,7 @@
 
 		for rule in self.rules:
 			if rule.match(line):
+				self.rules_hit[rule.name] = self.rules_hit.get(rule.name, 0) + 1
 				break
 
 	RE_DTAP_NAME = re.compile('.*GSM48_MT_([^_]+)_(.+)')
@@ -473,7 +476,8 @@
 			dtap = '%s %s' % m.groups()
 
 		if 'IMSI_DETACH_IND' in dtap:
-			# detecting IMSI Detach separately
+			# detecting IMSI Detach separately, because this log line does not contain the IMSI.
+			# By using the rule_imsi_detach(), we can accurately put it on the MO/MT side.
 			return True
 
 		if l3type == 'NONE' and not tx and dtap.endswith('PAG_RESP'):
@@ -497,6 +501,7 @@
 		imsi = m.group(1)
 		e = MO_MT_UNKNOWN
 		self.diagram.add_line(Arrow(e, MS_UE_UNKNOWN, '>', MSC, 'IMSI Detach', imsi=imsi))
+		return True
 
 	def rule_mgcp_tx(self, m):
 		r'.*mgw-endp\([^)]*:([^:]+):([^:]+)\).* (rtpbridge[^ ]+) .* RTP_TO_(RAN|CN)( CI=([^:]+)|): ([^ :]+).*: Sending'
@@ -512,19 +517,20 @@
 		return True
 
 	def rule_mgcp_rx(self, m):
-		r'.*mgw-endp\([^)]*:([^:]+):([^:]+)\).* (rtpbridge[^ ]+) .* RTP_TO_(RAN|CN)( CI=([^:]+)|).*: received successful response to ([^:]+): (.*)'
-		ran, l3type, endp, rtp_to, cond_ci, ci, verb, details = m.groups()
+		r'.*mgw-endp\(([^)]+):([^:)]+):([^:)]+)\).* (rtpbridge[^ ]+) .* RTP_TO_(RAN|CN)( CI=([^:]+)|).*: received successful response to ([^:]+): RTP=[^:]+:([0-9.:]+)'
+		subscr, ran_conn, l3type, endp, rtp_to, cond_ci, ci, verb, rtp = m.groups()
 		e = mo_mt_from_l3type(l3type)
 		endp = self.mask_value('EP', endp)
 		ci = self.mask_value('CI', ci)
 		ci_str = ''
 		if ci:
 			ci_str = ' %s' % ci
-		self.diagram.add_line(Arrow(e, MGW, '>', MSC, 'for %s: %s OK\\n%s%s' % (rtp_to, verb, endp, ci_str)))
+		rtp = self.mask_value('IP:port', rtp)
+		self.diagram.add_line(Arrow(e, MGW, '>', MSC, 'for %s: %s OK\\n%s%s %s' % (rtp_to, verb, endp, ci_str, rtp)))
 		return True
 
 	def rule_ran_tx(self, m):
-		r'.*msc_a\(([^)]*):([^:]+):([^:]+)\).* RAN encode: ([^: ]+): (.+)$'
+		r'.*msc_a\(([^)]+):([^:)]+):([^:)]+)\).* RAN encode: ([^: ]+): (.+)$'
 
 		subscr, ran_conn, l3type, ran_type, msg_type = m.groups()
 
@@ -538,8 +544,6 @@
 			# skip 'RAB Assignment: rab_id=1, rtp=192.168.178.66:50008, use_x213_nsap=1'
 			return True
 
-		if l3type == 'NONE':
-			return True
 
 		e = mo_mt_from_l3type(l3type)
 
@@ -555,7 +559,7 @@
 		return True
 
 	def rule_ran_rx(self, m):
-		r'.*msc_a\(([^)]*):([^:]+):([^:]+)\).* RAN decode: ([^: ]+) (.+)$'
+		r'.*msc_a\(([^)]+):([^:)]+):([^:)]+)\).* RAN decode: ([^: ]+) (.+)$'
 
 		subscr, ran_conn, l3type, ran_type, msg_type = m.groups()
 
@@ -563,8 +567,6 @@
 			# will get DTAP details from rule_dtap() instead, not from BSSMAP logging
 			return True
 
-		if l3type == 'NONE':
-			return True
 
 		e = mo_mt_from_l3type(l3type)
 
@@ -589,7 +591,7 @@
 		self.diagram.add_line(Arrow(e, MSC, '<>', '.', 'CC state:\\n%s' % to_state))
 		return True
 
-	def rule_log_mncc(self, m):
+	def rule_log_mncc_no_rtp(self, m):
 		r'.*trans\(CC[^) ]* [^ )]+:([^:)]+) callref-([^ ]+) [^)]+\) (tx|rx) (MNCC_[^ ]*)$'
 		l3type, callref_hex, tx_rx, mncc_msg = m.groups()
 
@@ -605,12 +607,34 @@
 		except:
 			e = MT
 
-		self.diagram.add_line(Arrow(e, MSC, '>' if tx else '<', 'sip', mncc_msg))
+		self.diagram.add_line(Arrow(e, MSC, '>' if tx else '<', 'mncc', mncc_msg))
+		return True
+
+	def rule_log_mncc_with_rtp(self, m):
+		r'.*trans\(CC[^) ]* [^ )]+:([^:)]+) callref-([^ ]+) [^)]+\) (tx|rx) (MNCC_[^ ]*) \(RTP=([^){]+)(|{.*})\)$'
+		l3type, callref_hex, tx_rx, mncc_msg, rtp, codec = m.groups()
+
+		if self.seen_udtrace_mncc:
+			# If no udtrace is present, take the MNCC logging.
+			# But if there is udtrace logging available, we should not duplicate those MNCC lines.
+			return True
+
+		tx = (tx_rx == 'tx')
+
+		try:
+			e = self.callrefs_mo_mt.get(callref_hex, MT)
+		except:
+			e = MT
+
+		rtp = self.mask_value('IP:port', rtp)
+		self.diagram.add_line(Arrow(e, MSC, '>' if tx else '<', 'mncc', f'{mncc_msg}\\n{rtp}'))
 		return True
 
 	RE_MNCC_RTP = re.compile(' ip := ([^, ]+), rtp_port := ([0-9]+),')
 	RE_MNCC_CALLREF = re.compile(' callref := ([^ ,]+), ')
 
+	# detecting MNCC with udtrace has the advantage that we also get an indication whether RTP information is
+	# present
 	def rule_udtrace_mncc(self, m):
 		r'.*(write|recv).* (Tx|Rx): \{ msg_type := ([^ ]+) .* u := \{ (.*) \} \}$'
 		write_recv, tx_rx, msg_type, u = m.groups()
@@ -650,7 +674,7 @@
 			descr = '%s\\n%s' % (descr, rtp_info)
 			break
 
-		self.diagram.add_line(Arrow(e, MSC, '>' if tx else '<', 'sip', descr))
+		self.diagram.add_line(Arrow(e, MSC, '>' if tx else '<', 'mncc', descr))
 		return True
 
 	def rule_cc_timer(self, m):
@@ -680,6 +704,9 @@
 			break;
 		parse.add_line(line)
 	parse.end()
+	if cmdline.verbose:
+		for name, count in parse.rules_hit.items():
+			print(f" {name}: {count}")
 
 def open_output(inf, cmdline):
 	if cmdline.output_file == '-':
@@ -716,6 +743,8 @@
 			     ' present. This makes the output reproducible across various logs.')
 	parser.add_argument('-s', '--start-with', dest='start_with_re', default=None,
 			help='Skip until the first message with this label (regex), e.g. -s "CC SETUP"')
+	parser.add_argument('-v', '--verbose', dest='verbose', action='store_true',
+			help='show some debug info, like which regex rules were hit and which were not.')
 
 	cmdline = parser.parse_args()