- 0d71163 msc: Send a signal when the connections to the MSC dropped by Holger Hans Peter Freyther · 14 years ago
- 6098038 bsc: Make the write method public it will be used by other modules by Holger Hans Peter Freyther · 14 years ago
- 5832b3e bsc: Add code responsible for connecting, reconnecting to the MSC by Holger Hans Peter Freyther · 14 years ago
- 79f763f bsc: Keep all active subscriber connections in a list. by Holger Hans Peter Freyther · 14 years ago
- bd76fab bsc: Add the osmo_bsc_grace from the on-waves/bsc-master branch by Holger Hans Peter Freyther · 14 years ago
- 7a1591b osmo_rf: Keep the current policy inside the RF struct.. by Holger Hans Peter Freyther · 14 years ago
- 9a8b5ae bsc: Move the rf_ctl into the msc data struct by Holger Hans Peter Freyther · 14 years ago
- 47b2601 bsc: Register a new MSC group with data for the MSC connection by Holger Hans Peter Freyther · 14 years ago
- 3e8e046 bsc: Create struct osmo_msc_data to hold MSC information, handle signals by Holger Hans Peter Freyther · 14 years ago
- 74e0a1b nat: Start inspecting every message coming from the BSC for the IMSI by Holger Hans Peter Freyther · 14 years ago
- 909e61f nat: Remember if we have check the imsi. by Holger Hans Peter Freyther · 14 years ago
- e66bf1f [paging] Only page if we have some free channels right now by Holger Hans Peter Freyther · 14 years ago
- 6410d93 [paging] When we ran down to 0 available paging slots start a credit timer by Holger Hans Peter Freyther · 14 years ago
- 76fc4a3 chan: Add configuration to handle paging any with TCH by Holger Hans Peter Freyther · 14 years ago
- 7889107 chan: Store the to be assigned channel type in the GSM Network. by Holger Hans Peter Freyther · 14 years ago
- 5a3a61d bsc_init: Allow DTXu and enable DTXd on RSL (experimental) by Holger Hans Peter Freyther · 14 years ago
- 457c2a8 [alloc] Assign a TCH for LU when all SDCCHs are occupied. by Holger Hans Peter Freyther · 14 years ago
- 85902a4 nat: We have 1 to 31 available to the BSC. by Holger Hans Peter Freyther · 14 years ago
- f7c86c5 nat: Replace the MGCP Endpoint if that is required by Holger Hans Peter Freyther · 14 years ago
- 45fd07d nat: Attempt to assign the BSC Timeslot based on a free list by Holger Hans Peter Freyther · 14 years ago
- 39cd32e nat: Remove the CRCX value from the nat by Holger Hans Peter Freyther · 14 years ago
- f4b3439 nat: Make the code work in terms of endpoints instead of timeslot/multiplex by Holger Hans Peter Freyther · 14 years ago
- 82049d8 mgcp: Add method to go back from endpoint to multiplex/timeslot by Holger Hans Peter Freyther · 14 years ago
- cb8c35c mgcp: Speculative mgcp fix... by Holger Hans Peter Freyther · 14 years ago
- 7a2c86b vty: Provide a is_config_node for the VTY and use it for the bsc by Holger Hans Peter Freyther · 14 years ago
- 39a97e2 mgcp: Remember if the endpoint was allocated... by Holger Hans Peter Freyther · 14 years ago
- 869e38e mgcp: Add a callback to inform the client that an endpoint got reallocated by Holger Hans Peter Freyther · 14 years ago
- 5b2726e nat: Keep the state (CRCX,MDCX,DLCX) of the operation.. by Holger Hans Peter Freyther · 14 years ago
- 4634013 mgcp: Make the CI uint32_t all the way to avoid mismatch by Holger Hans Peter Freyther · 14 years ago
- 260d6ed mgcp: Add a call tap feature to forward audio to another forward port by Holger Hans Peter Freyther · 14 years ago
- 6357a8e mgcp: Patch RTP packets again if that is allowed. by Holger Hans Peter Freyther · 14 years ago openbsc/0.9.3
- f138f91 mgcp: Allow to dynamically allocate ports from a range.. by Holger Hans Peter Freyther · 14 years ago
- 1be9f2f mgcp: Allow to have a different port allocation mode by Holger Hans Peter Freyther · 14 years ago
- 15e7389 mgcp: Prepare to have different port allocation strategies. by Holger Hans Peter Freyther · 14 years ago
- 314584a mgcp: Allocate a different port for the networking... by Holger Hans Peter Freyther · 14 years ago
- 196349d mgcp: Rename the base port to bts_base as it will be used for the bts by Holger Hans Peter Freyther · 14 years ago
- c492127 mgcp: Move the bfd for rtp/rtcp into the port by Holger Hans Peter Freyther · 14 years ago
- bb89aa1 mgcp: Make the function internal, only used by the init/config code by Holger Hans Peter Freyther · 14 years ago
- 217d712 mgcp: Rename the bind method to show it is only binding for the bts port by Holger Hans Peter Freyther · 14 years ago
- f1a168d mgcp: Only use early bind for the BTS socket. by Holger Hans Peter Freyther · 14 years ago
- 58ff219 mgcp: Attempt to separate the RTP/RTCP port for the Network and for the BTS by Holger Hans Peter Freyther · 14 years ago
- a17d701 mgcp: Group the state for bts/net into a struct and have two instances by Holger Hans Peter Freyther · 14 years ago
- 8b5772e mgcp: Remove the forwarding mode as it was not used. by Holger Hans Peter Freyther · 14 years ago
- a64c67d vty: Remove the logging command that is in libosmocore by Holger Hans Peter Freyther · 14 years ago
- 5c1e6cf mgcp: Only patch the header if we had a change in SSRC by Holger Hans Peter Freyther · 14 years ago openbsc/0.9.1
- 6aa882b mgcp: Allow switching the audio streams, patch the header by Holger Hans Peter Freyther · 14 years ago
- 3186892 mgcp: Move the rtp state into a struct by Holger Hans Peter Freyther · 14 years ago
- d5db12c Use new include paths of libosmo-sccp 0.0.2 by Harald Welte · 14 years ago
- c597a4e mgcp: Allow to change the receive (the loopback part) via the VTY by Holger Hans Peter Freyther · 14 years ago
- 98a3877 mgcp: Implement the "loopback" mode for a connection endpoint. by Holger Hans Peter Freyther · 14 years ago
- c2b31ed nat: Fix compilation with nat not being enabled. by Holger Hans Peter Freyther · 14 years ago
- 4b85a32 chan_alloc: Change Channel Release to release SAPIs, then the channel by Holger Hans Peter Freyther · 14 years ago
- 30e1ae9 sccp: Use the external libosmo-sccp as sccp implementation by Holger Hans Peter Freyther · 14 years ago
- 9fbff4a [BSC] Add support for configfile-hardcoded System Information messages by Harald Welte · 14 years ago
- 5f827f4 Add more RSL <-> Osmo SI type mappings, export osmo_sitype_strs[] by Harald Welte · 14 years ago
- 380b871 mgcp: Attempt to count missing RTP packets with a basic calculation by Holger Hans Peter Freyther · 14 years ago
- 12b917d osmo_bsc_rf: Add a grace command, send a signal by Holger Hans Peter Freyther · 14 years ago
- d0c3229 mgcp: Rename TOS to DSCP by Holger Hans Peter Freyther · 14 years ago
- 6b77107 nat: Rename ip-tos to ip-dscp and provide an alias... by Holger Hans Peter Freyther · 14 years ago
- e731e1d gsm_04_80: Allow to specify the alert pattern for the notification by Holger Hans Peter Freyther · 14 years ago
- 68d2679 gsm_04_80: Send a Release Complete otherwise the USSD unit stays BUSY by Holger Hans Peter Freyther · 14 years ago
- daf7534 gsm_04_80: Add untested code for USSD notification... by Holger Hans Peter Freyther · 14 years ago
- b02c89e gsm_04_80: Add code to wrap a facility IE around. by Holger Hans Peter Freyther · 14 years ago
- 15ef17e gsm_04_80: Create a unstructuredSS-Notify message by Holger Hans Peter Freyther · 14 years ago
- 80dfa75 gsm_04_80: Fix the style and move the '*' to the function by Holger Hans Peter Freyther · 14 years ago
- 6a4b362 gsm0480: Implement a generic "invoke" wrapping for messages. by Holger Hans Peter Freyther · 14 years ago
- 680833e gsm0480: Attempt to encode a NotifySS-Arg with a username.. by Holger Hans Peter Freyther · 14 years ago
- fa530cd gsm_subscriber: Increase the name to 160 charachters by Holger Hans Peter Freyther · 14 years ago
- dbd16fe nat: u_int8_t -> uint8_t by Holger Hans Peter Freyther · 14 years ago
- ca157ed Merge branch 'on-waves/sccp' by Holger Hans Peter Freyther · 14 years ago
- ccc91f3 sccp: u_int32_t -> uint32_t by Holger Hans Peter Freyther · 14 years ago
- c2c4621 sccp: u_int8_t -> uint8_t by Holger Hans Peter Freyther · 14 years ago
- 8cb4a0f rsl: Add method to send a SMSCB inside a SMS BROADCAST COMMAND by Holger Hans Peter Freyther · 14 years ago
- c702b75 bsc_api: Add cipher mod reject api callback by Holger Hans Peter Freyther · 14 years ago
- dbc62db bsc_api: Add stub for the cipher mode command. by Holger Hans Peter Freyther · 14 years ago
- c354de8 bsc_api: Create dummy stub for the assignment command. by Holger Hans Peter Freyther · 14 years ago
- c95cf10 [ipaccess-config] fix bugs in generating the PHYSICAL CONFIG attribute by Harald Welte · 14 years ago
- a0b0f36 ipaccess-config/network-listen update by Harald Welte · 14 years ago
- 887deab ipaccess-config / network listen: ordered list of RxLevels by Harald Welte · 14 years ago
- 549faad move ip.access netowrk listen (NWL) to network_listen.c by Harald Welte · 14 years ago
- 6d2b66e abis_nm: Create a signal data structure for the NACK message by Holger Hans Peter Freyther · 14 years ago
- 4f448c9 bsc: Add header file for the true BSC API. by Holger Hans Peter Freyther · 14 years ago
- 02d39b2 msc: Create a dummy operation to keep the channel open for five seconds by Holger Hans Peter Freyther · 14 years ago
- d1d45b3 nat: Remove the first_contact variable. by Holger Hans Peter Freyther · 14 years ago
- 20ee312 nat: Create a method to determine if any MSC is connected. by Holger Hans Peter Freyther · 14 years ago
- bec411b nat: Store the msc_con in the data of the bsc_fd by Holger Hans Peter Freyther · 14 years ago
- 3a77e61 nat: Keep track of the MSC handling the connection. by Holger Hans Peter Freyther · 14 years ago
- 4b6ac1e [SGSN] Initial work on GMM authentication and ciphering by Harald Welte · 14 years ago
- d07b4f9 [SGSN] Use libosmocore GPRS encryption plugins from LLC layer by Harald Welte · 14 years ago
- 496aee4 [SGSN] Call libosmocore helper to load cipher plugins by Harald Welte · 14 years ago
- 8911cef [SGSN] Fix segfault when passing re-assembled SN-PDU to GMM by Harald Welte · 14 years ago
- 2f4dbeb osmo-bsc: Start adding code for the osmo_bsc.. by Holger Hans Peter Freyther · 14 years ago
- f2553a6 handover: Call bsc_handover_clear from gsm0808_clear by Holger Hans Peter Freyther · 14 years ago
- e071ab7 handover: Attempt to use the same gsm_subscriber_conn for new/old channel by Holger Hans Peter Freyther · 14 years ago
- 4049455 bsc_msc: Remove use_count from the subscriber connection by Holger Hans Peter Freyther · 14 years ago
- 2412a07 bsc_api: Allocate the subscriber_connection dynamically by Holger Hans Peter Freyther · 14 years ago
- 5ba05f4 abis_rsl: Send the IMMEDIATE Assignment after the Channel Ack. by Holger Hans Peter Freyther · 14 years ago
- db4ef0d bsc_api: Remove the lchan usage from the Paging Response handling. by Holger Hans Peter Freyther · 14 years ago
- 758f4df silent_call: Use the gsm_subscriber_connection instead of lchan->conn by Holger Hans Peter Freyther · 14 years ago
- 29aca17 [BSC] Hopping: Add MA IE to ASS CMD, IMM ASS CMD and HO CMD by Harald Welte · 14 years ago