Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
osmo-mgw
/
a0fe72de6f7d4c6cd7b6508b7e819e94f8c29989
« Previous
27640fc
nat: Improve the log message in case we have SCCP data without a connection
by Holger Hans Peter Freyther
· 14 years ago
5f54075
vty: Use \r\n in the copyright messages
by Holger Hans Peter Freyther
· 14 years ago
38158fb
bsc: Set the copyright for the real BSC.
by Holger Hans Peter Freyther
· 14 years ago
2e4447b
[paging] Implement the counting for TCH/H and TCH/F
by Holger Hans Peter Freyther
· 14 years ago
e66bf1f
[paging] Only page if we have some free channels right now
by Holger Hans Peter Freyther
· 14 years ago
eb241aa
[paging] Continuisly send paging commands.
by Holger Hans Peter Freyther
· 14 years ago
78fab29
[paging] When giving credit try to send out paging requests too.
by Holger Hans Peter Freyther
· 14 years ago
6410d93
[paging] When we ran down to 0 available paging slots start a credit timer
by Holger Hans Peter Freyther
· 15 years ago
b0e88b8
vty: Fix build due to merge issue.
by Holger Hans Peter Freyther
· 14 years ago
76fc4a3
chan: Add configuration to handle paging any with TCH
by Holger Hans Peter Freyther
· 14 years ago
7889107
chan: Store the to be assigned channel type in the GSM Network.
by Holger Hans Peter Freyther
· 14 years ago
5a3a61d
bsc_init: Allow DTXu and enable DTXd on RSL (experimental)
by Holger Hans Peter Freyther
· 14 years ago
457c2a8
[alloc] Assign a TCH for LU when all SDCCHs are occupied.
by Holger Hans Peter Freyther
· 14 years ago
d368a71
nat: Use ':' to separate the message and strerror
by Holger Hans Peter Freyther
· 14 years ago
6ffca13
vty: CONFIG_NODE is the anchor and should not be treated as config.
by Holger Hans Peter Freyther
· 14 years ago
81506b4
vty: Add the config node code to everyone.
by Holger Hans Peter Freyther
· 14 years ago
6262643
channel_release: First attempt to update the doc to new code.
by Holger Hans Peter Freyther
· 14 years ago
afdb522
Merge branch 'on-waves/nat-alloc-bsc-endpoints'
by Holger Hans Peter Freyther
· 14 years ago
openbsc/0.9.5
85902a4
nat: We have 1 to 31 available to the BSC.
by Holger Hans Peter Freyther
· 14 years ago
f7c86c5
nat: Replace the MGCP Endpoint if that is required
by Holger Hans Peter Freyther
· 14 years ago
bf812fa
nat: Use different static transaction numbers for the DLCX/MDCX message
by Holger Hans Peter Freyther
· 14 years ago
d38aa45
nat: Document that the MDCX message is not implemented
by Holger Hans Peter Freyther
· 14 years ago
601180f
nat: Send the right MDCX down the stream
by Holger Hans Peter Freyther
· 14 years ago
7d5bb26
nat: Remove the code that is wrongly placed..
by Holger Hans Peter Freyther
· 14 years ago
8574dcf
nat: Close the right endpoint down the stream.
by Holger Hans Peter Freyther
· 14 years ago
0d8330c
nat: Add vty command to show the endpoint allocation status
by Holger Hans Peter Freyther
· 14 years ago
45fd07d
nat: Attempt to assign the BSC Timeslot based on a free list
by Holger Hans Peter Freyther
· 14 years ago
39cd32e
nat: Remove the CRCX value from the nat
by Holger Hans Peter Freyther
· 14 years ago
c021fbe
nat: Reindent the code, no functional change
by Holger Hans Peter Freyther
· 14 years ago
f4b3439
nat: Make the code work in terms of endpoints instead of timeslot/multiplex
by Holger Hans Peter Freyther
· 14 years ago
5910033
nat: Use the bsc_timeslot when talking to the BSC downstream
by Holger Hans Peter Freyther
· 14 years ago
82049d8
mgcp: Add method to go back from endpoint to multiplex/timeslot
by Holger Hans Peter Freyther
· 14 years ago
cb8c35c
mgcp: Speculative mgcp fix...
by Holger Hans Peter Freyther
· 14 years ago
9ae28a1
[gprs] Add option parsing to SGSN
by Harald Welte
· 14 years ago
0e6be0e
debian: add init script, /etc/default file and example config files
by Harald Welte
· 14 years ago
2c67f47
debian: make more dependencies explicit in 'control' file
by Harald Welte
· 14 years ago
7a2c86b
vty: Provide a is_config_node for the VTY and use it for the bsc
by Holger Hans Peter Freyther
· 14 years ago
2c869ef
Introduce '-D' commandline option to daemonize processes
by Harald Welte
· 14 years ago
305e290
debian: don't buld arch-independent packages with executables in them
by Harald Welte
· 14 years ago
ba43969
debian: don't use override_dh_* for lenny compatibility
by Harald Welte
· 14 years ago
5c55c49
debian: add build dependency to pkg-config
by Harald Welte
· 14 years ago
11e79bd
debian: add runtime dependency to libdbd-sqlite3
by Harald Welte
· 14 years ago
3edb60d
debian: add build dependency to libdbi0-dev
by Harald Welte
· 14 years ago
4dc025b
bsc_init: Compare it with the right enum type
by Holger Hans Peter Freyther
· 14 years ago
640d72a
Add 'debian' directory containing debian packaging information
by Harald Welte
· 14 years ago
2a90a25
Add gprs_sndcp.h to noinst_HEADERS
by Harald Welte
· 14 years ago
e0009f1
gsm48: Add method to send a separate facility message...
by Holger Hans Peter Freyther
· 14 years ago
c1fa794
[GPRS NS] Fix memory leak in gprs_ns_sendmsg() error path
by Harald Welte
· 14 years ago
5508fe3
mgcp: Add a vty command to free a given endpoint.
by Holger Hans Peter Freyther
· 14 years ago
9e9392d
mgcp: Use transient errors in more cases...
by Holger Hans Peter Freyther
· 14 years ago
e378cb1
mgcp: Reduce the log level to debug for these calls.
by Holger Hans Peter Freyther
· 14 years ago
openbsc/0.9.4
da34063
nat: Do not report paging to every BTS...
by Holger Hans Peter Freyther
· 14 years ago
7d47601
nat: In case the downstream fails on a CRCX, ask it to do a DLCX
by Holger Hans Peter Freyther
· 14 years ago
39a97e2
mgcp: Remember if the endpoint was allocated...
by Holger Hans Peter Freyther
· 14 years ago
869e38e
mgcp: Add a callback to inform the client that an endpoint got reallocated
by Holger Hans Peter Freyther
· 14 years ago
c2ff554
nat: Use the state information for the callback.
by Holger Hans Peter Freyther
· 14 years ago
5b2726e
nat: Keep the state (CRCX,MDCX,DLCX) of the operation..
by Holger Hans Peter Freyther
· 14 years ago
b84b5f6
nat: Free the endpoint when we get an empty CI.
by Holger Hans Peter Freyther
· 14 years ago
4634013
mgcp: Make the CI uint32_t all the way to avoid mismatch
by Holger Hans Peter Freyther
· 14 years ago
9c31cfc
nat: Provide information of when a msg does not contain a CI
by Holger Hans Peter Freyther
· 14 years ago
52ccf6a
mgcp: Fix discovering the RTCP port with the more strict check.
by Holger Hans Peter Freyther
· 14 years ago
0d44eb6
mgcp: Determine the proto properly...
by Holger Hans Peter Freyther
· 14 years ago
e2170a9
bsc_msc: Remove the except code as it is wrong...
by Holger Hans Peter Freyther
· 14 years ago
7fe2a3d
mgcp: Add instrumentation code to find a possible port leak/bsc-fd corruption
by Holger Hans Peter Freyther
· 14 years ago
414bf40
mgcp: Move the mgcp_free_endp into the right path for the CRCX failure
by Holger Hans Peter Freyther
· 14 years ago
6f36e92
mgcp: Fix a filedescriptor leak in case the bind is failing.
by Holger Hans Peter Freyther
· 14 years ago
0e01d09
mgcp: Enable the tap after configuring it...
by Holger Hans Peter Freyther
· 14 years ago
260d6ed
mgcp: Add a call tap feature to forward audio to another forward port
by Holger Hans Peter Freyther
· 14 years ago
6357a8e
mgcp: Patch RTP packets again if that is allowed.
by Holger Hans Peter Freyther
· 14 years ago
openbsc/0.9.3
a39ddd5
mgcp: Get the for network/for bts flag right.
by Holger Hans Peter Freyther
· 14 years ago
openbsc/0.9.2
ea97fbf
mgcp: Be more strict on the source addr/source port of the bts
by Holger Hans Peter Freyther
· 14 years ago
b97c50d
mgcp: Only discover the bts once, the extra check got lost
by Holger Hans Peter Freyther
· 14 years ago
d5e6c23
nat: Use the mgcp_config_alloc to have defaults initialized
by Holger Hans Peter Freyther
· 14 years ago
f138f91
mgcp: Allow to dynamically allocate ports from a range..
by Holger Hans Peter Freyther
· 14 years ago
1be9f2f
mgcp: Allow to have a different port allocation mode
by Holger Hans Peter Freyther
· 14 years ago
15e7389
mgcp: Prepare to have different port allocation strategies.
by Holger Hans Peter Freyther
· 14 years ago
a3b46c9
mgcp: Fix the signature of the change_cb to not carry the port.
by Holger Hans Peter Freyther
· 14 years ago
e602cd6
mgcp: Separate recv from net/bts and remove autodetection
by Holger Hans Peter Freyther
· 14 years ago
1fc4329
mgcp: Move the loopback code into the common send as well.
by Holger Hans Peter Freyther
· 14 years ago
b615164
mgcp: Remove the receive code into a new method.
by Holger Hans Peter Freyther
· 14 years ago
84e1c47
mgcp: Move the selection of the right source port to a new method
by Holger Hans Peter Freyther
· 14 years ago
314584a
mgcp: Allocate a different port for the networking...
by Holger Hans Peter Freyther
· 14 years ago
196349d
mgcp: Rename the base port to bts_base as it will be used for the bts
by Holger Hans Peter Freyther
· 14 years ago
c492127
mgcp: Move the bfd for rtp/rtcp into the port
by Holger Hans Peter Freyther
· 14 years ago
bb89aa1
mgcp: Make the function internal, only used by the init/config code
by Holger Hans Peter Freyther
· 14 years ago
217d712
mgcp: Rename the bind method to show it is only binding for the bts port
by Holger Hans Peter Freyther
· 14 years ago
f1a168d
mgcp: Only use early bind for the BTS socket.
by Holger Hans Peter Freyther
· 14 years ago
58ff219
mgcp: Attempt to separate the RTP/RTCP port for the Network and for the BTS
by Holger Hans Peter Freyther
· 14 years ago
a17d701
mgcp: Group the state for bts/net into a struct and have two instances
by Holger Hans Peter Freyther
· 14 years ago
8b5772e
mgcp: Remove the forwarding mode as it was not used.
by Holger Hans Peter Freyther
· 14 years ago
7f8aec2
mgcp: Fix the payload_type... it broke in 7cdc62c01223570441e60ec6d0dd7a92e622677b
by Holger Hans Peter Freyther
· 14 years ago
e66cac3
nat: Fix the spelling of that comment.
by Holger Hans Peter Freyther
· 14 years ago
7cdc62c
mgcp: Fix the reversed net/bts... which has not cause any issue..
by Holger Hans Peter Freyther
· 14 years ago
c02f11a
mgcp: Pass the whole endpoint to the patch method.
by Holger Hans Peter Freyther
· 14 years ago
f1f6bba
mgcp: Fix the order of the arguments...
by Holger Hans Peter Freyther
· 14 years ago
aaf8301
mgcp: Print the conn mode as well
by Holger Hans Peter Freyther
· 14 years ago
bb14e62
mgcp: Disable the actual patching... this is a temporary hack
by Holger Hans Peter Freyther
· 14 years ago
2f10458
mgcp: Print the system for the duplicate SSRC...
by Holger Hans Peter Freyther
· 14 years ago
6526ca7
ipaccess-config / NWL: Decode + print neighbor cell ARFCNs
by Harald Welte
· 14 years ago
a64c67d
vty: Remove the logging command that is in libosmocore
by Holger Hans Peter Freyther
· 14 years ago
Next »