- 5655471 some more comments for BS11 attributes by Harald Welte · 15 years ago
- 03582a8 bsc_hack.c: Make adding of (nano)BTS to the network dynamic by Holger Hans Peter Freyther · 15 years ago
- 0efe9b7 more ip.access abis_nm attributes by Harald Welte · 15 years ago
- 53833f6 remove SI3 and SI4 rest octets by Harald Welte · 15 years ago
- 8226fa7 the pointer "tall_bsc_ctx" belongs to the gsm_data.c file not to include file. by Andreas Eversberg · 15 years ago
- e441d9c switch to dynamically allocated BTS and TRX data structures by Harald Welte · 15 years ago
- 2cf161b introduce talloc all over OpenBSC by Harald Welte · 15 years ago
- fcd2445 Introduce BS and MS power control related functions by Harald Welte · 15 years ago
- a865f1b BS11: use abis_nm_set_{bts,radio}_attr() by Harald Welte · 15 years ago
- 4bfdfe7 reworked MNCC codebase by Harald Welte · 15 years ago
- 500f3ca [o&m] Dispatch a signal for nacked O&M messages by Holger Hans Peter Freyther · 15 years ago
- e91f578 [bsc_hack] Sanity check for the GSM1800 nanoBTS by Holger Hans Peter Freyther · 15 years ago
- 13e10da move openbsc into its own subdirectory by Harald Welte · 15 years ago[Renamed from src/bsc_hack.c]
- d3ff51d don't prefix every line with timestamp, this saves some screen real estate by Harald Welte · 15 years ago
- d0fbab5 some more comments by Harald Welte · 15 years ago
- 578001b bsc_hack.c: Fix the -l db option (Andreas Eversberg) by Holger Freyther · 15 years ago
- c7b86f9 Revert "[db] Keep track of the current gsm_network" by Holger Freyther · 15 years ago
- b8be654 [e1] Correctly initialize the e1link (Andreas Eversberg) by Holger Freyther · 15 years ago
- 7b26bcb * give Siemens ObjClass reasonable names rather than A3/A5/A6 by Harald Welte · 15 years ago
- fe609d8 some more comments on the abis attributes by Harald Welte · 15 years ago
- 060f6df make sure even our predefined structures use HARDCODED_BSIC as initial value by Harald Welte · 15 years ago
- 78f2f50 Add user-configurable BSIC setting by Harald Welte · 15 years ago
- 110c0ab * replace some more hex bytes in init msgs by #defines by Harald Welte · 15 years ago
- 04d3c92 An application that has own events and file descriptors, must poll by Harald Welte · 15 years ago
- a994a48 remove misleading debug messages by Harald Welte · 15 years ago
- cf55978 make sure we terminate bsc_hack if the OML/RSL listening sockets cannot be created by Harald Welte · 15 years ago
- b463060 Fix long-standing bug: nanoBTS now even works after cold boot (first time after power up). by Harald Welte · 15 years ago
- 879c85a no need to make gsmnet structure non-static (fix from last commit) by Harald Welte · 15 years ago
- edb3778 * Add support for multiple ip.access nanoBTS at one BSC by Harald Welte · 15 years ago
- 191280d abis_nm wants to use bts->bts_nr (the number of the BTS in the OML link) rather by Harald Welte · 15 years ago
- b5c00f5 [misdn] Add option to automatically release layer2 on exit by Holger Freyther · 15 years ago
- dda22c1 [bsc_hack] Allow to select the cardnr defaulting to number 0 by Holger Freyther · 15 years ago
- 0a173bf [bsc_hack] Allow to set the location area code by Holger Freyther · 15 years ago
- bcdebbf [bsc_hack] House keeping, remove dead code by Holger Freyther · 15 years ago
- 36650b8 [db] Keep track of the current gsm_network by Holger Freyther · 15 years ago
- ef7f7ce [bsc_hack] Initialize db as part of the network by Holger Freyther · 15 years ago
- 0469cf6 [e1] Enable dumping of LAPD frames again by Holger Freyther · 15 years ago
- 32201c1 move is_ipaccess_bts() and parse_btstype9) to gsm_data.c by Harald Welte · 15 years ago
- ff9592f [misc] Fix compile warnings... by Holger Freyther · 15 years ago
- 65ccf88 fix non-randomness of TMSI by seeding the PRNG. Later we should use openssl by Harald Welte · 15 years ago
- 41fbf44 enable IMSI ATTACH/DETACH by Harald Welte · 15 years ago
- fd2fb45 25C3 is over, so call our network OpenBSC by Harald Welte · 16 years ago
- 23887b6 use official TCH/F for initial channel modes rather than BS-11 specific 0x09 by Harald Welte · 16 years ago
- 311d0cf don't reduce power quite as much to make sure we still get a singal (bs-11) and nanoBTS doesn't refuse the attribute at all by Harald Welte · 16 years ago
- cd99387 * use more constants to name the various BTS/TRX/... attributes by Harald Welte · 16 years ago
- 9400932 support non-123 ARFCN on nonoBTS by Harald Welte · 16 years ago
- e1bd241 * use the correct BCCH channel type for nanoBTS by Harald Welte · 16 years ago
- 5c1e458 Add support for ip.access RSL link on port 3003 by Harald Welte · 16 years ago
- 8c1d0e4 * add bsc_hack commandline argument to select BTS type by Harald Welte · 16 years ago
- 3b91043 [ccch load] Enable notifications for CCCH/PAGING LOAD again by Holger Freyther · 16 years ago
- cd06bfb * fill the e1_link member of every bts_trx_ts structure by Harald Welte · 16 years ago
- 1fd3414 [paging] Cleanup page -> paging in function names by Holger Freyther · 16 years ago
- 1fa60c8 * add trau_mux implementation to relay from one incoming TRAU by Harald Welte · 16 years ago
- e79769b make sure certain functions are per TRX, not per BTS, such as by Harald Welte · 16 years ago
- ceb59b7 [paging] Move the paging state into struct gsm_bts by Holger Freyther · 16 years ago
- 0bbb8b2 increase CCCH LOAD indication threshold to 50% to remove lots of noise by Harald Welte · 16 years ago
- 1adb4ff [paging] Keep a copy of the Control Channel Description in the bts struct by Holger Freyther · 16 years ago
- 8328229 Enable CCCH LOAD INDICATION always, from 0% upwards, and report it every second by Harald Welte · 16 years ago
- 7837489 abis_nm_reset_resource is a bs11 specific function by Harald Welte · 16 years ago
- 05188ee * prefix all BS11 specific OML functions with proper name by Harald Welte · 16 years ago
- 38c2f13 Hook the paging code into bsc_hack.c and telnet_interface.c by Harald Welte · 16 years ago
- 9898188 Allow to set a different ARFCN by Harald Welte · 16 years ago
- 8965da4 Tabs no Spaces... at least here by Harald Welte · 16 years ago
- ca362a6 Make gcc happy and remove a couple of warnings by Holger Freyther · 16 years ago
- 219518d Add simplistic telnet control interface by Holger Freyther · 16 years ago
- 9a3ee0f Add the option to write the communication on the D Channel to a pcap file by Holger Freyther · 16 years ago
- 355701b Document where to find the how to determine the paging group by Holger Freyther · 16 years ago
- d125250 add signal handlers for clean shutdown of BTS via OML on shutdown of program by Harald Welte · 16 years ago
- 2176881 don't return a value in a void function by Harald Welte · 16 years ago
- e97f7fb Add an option to set the global reject cause by Holger Freyther · 16 years ago
- f5cbab7 * add network name information to GSM network * disable callbacks for now by Harald Welte · 16 years ago
- 89824fc Add an option to allow everyone to the network. by Holger Freyther · 16 years ago
- e6cabf0 Channel opened not from a PAGING COMMAND... remove message by Holger Freyther · 16 years ago
- b7193e4 Introduce new callbacks, remember that we have LOC UPD REQ, reject things only once by Holger Freyther · 16 years ago
- 2eafef5 Up on call released release the channel and take the next item by Holger Freyther · 16 years ago
- abade7a Initiate a call once we have a channel assigned by Holger Freyther · 16 years ago
- 88ea832 Unite the acked/nacked handling in a common response... by Holger Freyther · 16 years ago
- 24893de Inform the bsc about acked or nacked channels... by Holger Freyther · 16 years ago
- 3186bf2 Add callback for allocated lchannels by Holger Freyther · 16 years ago
- 07cc8d8 Improve page command handling in the bsc_hack by Holger Freyther · 16 years ago
- 3b2ec42 Documentation update and where we found the information by Harald Welte · 16 years ago
- 65e74cc disable paging, send SETUP after LOCATION UPDATE ACCEPT by Harald Welte · 16 years ago
- b84e2f4 * use 16bit for network and country code by Harald Welte · 16 years ago
- bde3610 make it optional where the hlr database is stored by Holger Freyther · 16 years ago
- 33a6184 Add the new options to the getopt_long call as well by Holger Freyther · 16 years ago
- 104604e Fix compile, on rebase the static_assert change got lost... by Harald Welte · 16 years ago
- b9ddfd0 [bsc_hack] Patch the tables before we setup the rsl by Holger Freyther · 16 years ago
- 4d50547 [bsc_hack] Start to understand the SI packages we send by Holger Freyther · 16 years ago
- 24287b6 [bsc_hack] Make sure that the newly defined structs match the current packets by Holger Freyther · 16 years ago
- efde7fb bsc_hack: Add command line parameter to set the MCC and MNC by Holger Freyther · 16 years ago
- 255539c working state up to location update and classmark inquiry by Harald Welte · 16 years ago
- 75a983f * add database handling * fix IMSI handling by Harald Welte · 16 years ago
- b332f61 Use getopt in the bsc_hack to parse options by Holger Freyther · 16 years ago
- 32636e8 Move the debug code to a separate debug.c by Holger Freyther · 16 years ago
- 5677ae3 misdn.h forward declare mi_setup by Holger Freyther · 16 years ago
- 702d870 working state up to location update and classmark inquiry by Harald Welte · 16 years ago
- ad38464 this is the first version that actually talks to the BTS by Harald Welte · 16 years ago
- f6b7a90 add debugp() function to fulfill link dependency and build executable by Harald Welte · 16 years ago
- 8470bf2 no reasonable commit message possible. tons of changes of the last 2 days by Harald Welte · 16 years ago
- 52b1f98 initial commit of current OpenBSC state by Harald Welte · 16 years ago