/* Siemens BS-11 microBTS configuration tool */

/* (C) 2009 by Harald Welte <laforge@gnumonks.org>
 * All Rights Reserved
 *
 * This software is based on ideas (but not code) of BS11Config 
 * (C) 2009 by Dieter Spaar <spaar@mirider.augusta.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 */

#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include <string.h>
#include <getopt.h>
#include <fcntl.h>
#include <signal.h>

#include <sys/types.h>
#include <sys/stat.h>

#include <openbsc/gsm_data.h>
#include <openbsc/abis_nm.h>
#include <openbsc/msgb.h>
#include <openbsc/tlv.h>
#include <openbsc/debug.h>
#include <openbsc/select.h>
#include <openbsc/rs232.h>

/* state of our bs11_config application */
enum bs11cfg_state {
	STATE_NONE,
	STATE_LOGON_WAIT,
	STATE_LOGON_ACK,
	STATE_SWLOAD,
	STATE_QUERY,
};
static enum bs11cfg_state bs11cfg_state = STATE_NONE;
static char *command;
struct timer_list status_timer;

static const u_int8_t obj_li_attr[] = { 
	NM_ATT_BS11_BIT_ERR_THESH, 0x09, 0x00,
	NM_ATT_BS11_L1_PROT_TYPE, 0x00, 
	NM_ATT_BS11_LINE_CFG, 0x00,
};
static const u_int8_t obj_bbsig0_attr[] = {
	NM_ATT_BS11_RSSI_OFFS, 0x02, 0x00, 0x00,
	NM_ATT_BS11_DIVERSITY, 0x01, 0x00,
};
static const u_int8_t obj_pa0_attr[] = {
	NM_ATT_BS11_TXPWR, 0x01, BS11_TRX_POWER_GSM_30mW,
};
static const char *trx1_password = "1111111111";
#define TEI_OML	25

static const u_int8_t too_fast[] = { 0x12, 0x80, 0x00, 0x00, 0x02, 0x02 };


int handle_serial_msg(struct msgb *rx_msg);

/* create all objects for an initial configuration */
static int create_objects(struct gsm_bts *bts)
{
	fprintf(stdout, "Crating Objects for minimal config\n");
	abis_nm_bs11_create_object(bts, BS11_OBJ_LI, 0, sizeof(obj_li_attr),
				   obj_li_attr);
	abis_nm_bs11_create_object(bts, BS11_OBJ_GPSU, 0, 0, NULL);
	abis_nm_bs11_create_object(bts, BS11_OBJ_ALCO, 0, 0, NULL);
	abis_nm_bs11_create_object(bts, BS11_OBJ_CCLK, 0, 0, NULL);
	abis_nm_bs11_create_object(bts, BS11_OBJ_BBSIG, 0,
				   sizeof(obj_bbsig0_attr), obj_bbsig0_attr);
	abis_nm_bs11_create_object(bts, BS11_OBJ_PA, 0,
				   sizeof(obj_pa0_attr), obj_pa0_attr);
	abis_nm_bs11_create_envaBTSE(bts, 0);
	abis_nm_bs11_create_envaBTSE(bts, 1);
	abis_nm_bs11_create_envaBTSE(bts, 2);
	abis_nm_bs11_create_envaBTSE(bts, 3);

	abis_nm_bs11_conn_oml_tei(bts, 0, 1, 0xff, TEI_OML);

	abis_nm_bs11_set_trx_power(&bts->trx[0], BS11_TRX_POWER_GSM_30mW);
	
	sleep(1);

	abis_nm_bs11_set_trx1_pw(bts, trx1_password);

	sleep(1);

	return 0;
}

static int create_trx1(struct gsm_bts *bts)
{
	u_int8_t bbsig1_attr[sizeof(obj_bbsig0_attr)+12];
	u_int8_t *cur = bbsig1_attr;

	fprintf(stdout, "Crating Objects for TRX1\n");

	abis_nm_bs11_set_trx1_pw(bts, trx1_password);

	sleep(1);

	cur = tlv_put(cur, NM_ATT_BS11_PASSWORD, 10,
		      (u_int8_t *)trx1_password);
	memcpy(cur, obj_bbsig0_attr, sizeof(obj_bbsig0_attr));
	abis_nm_bs11_create_object(bts, BS11_OBJ_BBSIG, 1,
				   sizeof(bbsig1_attr), bbsig1_attr);
	abis_nm_bs11_create_object(bts, BS11_OBJ_PA, 1,
				   sizeof(obj_pa0_attr), obj_pa0_attr);
	abis_nm_bs11_set_trx_power(&bts->trx[1], BS11_TRX_POWER_GSM_30mW);
	
	return 0;
}

static char *serial_port = "/dev/ttyUSB0";
static char *fname_safety = "BTSBMC76.SWI";
static char *fname_software = "HS011106.SWL";
static int delay_ms = 0;
static int win_size = 8;
static int param_disconnect = 0;
static int param_restart = 0;
static int param_forced = 0;
static struct gsm_bts *g_bts;

static int file_is_readable(const char *fname)
{
	int rc;
	struct stat st;

	rc = stat(fname, &st);
	if (rc < 0)
		return 0;

	if (S_ISREG(st.st_mode) && (st.st_mode & S_IRUSR))
		return 1;

	return 0;
}

static int percent;
static int percent_old;

/* callback function passed to the ABIS OML code */
static int swload_cbfn(unsigned int hook, unsigned int event, struct msgb *msg,
		       void *data, void *param)
{
	if (hook != GSM_HOOK_NM_SWLOAD)
		return 0;

	switch (event) {
	case NM_MT_LOAD_INIT_ACK:
		fprintf(stdout, "Software Load Initiate ACK\n");
		break;
	case NM_MT_LOAD_INIT_NACK:
		fprintf(stderr, "ERROR: Software Load Initiate NACK\n");
		exit(5);
		break;
	case NM_MT_LOAD_END_ACK:
		if (data) {
			/* we did a safety load and must activate it */
			abis_nm_software_activate(g_bts, fname_safety,
						  swload_cbfn, g_bts);
			sleep(5);
		}
		break;
	case NM_MT_LOAD_END_NACK:
		fprintf(stderr, "ERROR: Software Load End NACK\n");
		exit(3);
		break;
	case NM_MT_ACTIVATE_SW_NACK:
		fprintf(stderr, "ERROR: Activate Software NACK\n");
		exit(4);
		break;
	case NM_MT_ACTIVATE_SW_ACK:
		bs11cfg_state = STATE_NONE;
		
		break;
	case NM_MT_LOAD_SEG_ACK:
		percent = abis_nm_software_load_status(g_bts);
		if (percent > percent_old)
			printf("Software Download Progress: %d%%\n", percent);
		percent_old = percent;
		break;
	}
	return 0;
}

static const char *bs11_link_state[] = {
	[0x00]	= "Down",
	[0x01]	= "Up",
	[0x02]	= "Restoring",
};

static const char *linkstate_name(u_int8_t linkstate)
{
	if (linkstate > ARRAY_SIZE(bs11_link_state))
		return "Unknown";

	return bs11_link_state[linkstate];
}

static const char *mbccu_load[] = {
	[0]	= "No Load",
	[1]	= "Load BTSCAC",
	[2]	= "Load BTSDRX",
	[3]	= "Load BTSBBX",
	[4]	= "Load BTSARC",
	[5]	= "Load",
};

static const char *mbccu_load_name(u_int8_t linkstate)
{
	if (linkstate > ARRAY_SIZE(mbccu_load))
		return "Unknown";

	return mbccu_load[linkstate];
}

static const char *bts_phase_name(u_int8_t phase)
{
	switch (phase) {
	case BS11_STATE_WARM_UP:
	case BS11_STATE_WARM_UP_2:
		return "Warm Up";
		break;
	case BS11_STATE_LOAD_SMU_SAFETY:
		return "Load SMU Safety";
		break;
	case BS11_STATE_LOAD_SMU_INTENDED:
		return "Load SMU Intended";
		break;
	case BS11_STATE_LOAD_MBCCU:
		return "Load MBCCU";
		break;
	case BS11_STATE_SOFTWARE_RQD:
		return "Software required";
		break;
	case BS11_STATE_WAIT_MIN_CFG:
	case BS11_STATE_WAIT_MIN_CFG_2:
		return "Wait minimal config";
		break;
	case BS11_STATE_MAINTENANCE:
		return "Maintenance";
		break;
	case BS11_STATE_NORMAL:
		return "Normal";
		break;
	case BS11_STATE_ABIS_LOAD:
		return "Abis load";
		break;
	default:
		return "Unknown";
		break;
	}
}

static const char *trx_power_name(u_int8_t pwr)
{
	switch (pwr) {
	case BS11_TRX_POWER_GSM_2W:	
		return "2W (GSM)";
	case BS11_TRX_POWER_GSM_250mW:
		return "250mW (GSM)";
	case BS11_TRX_POWER_GSM_80mW:
		return "80mW (GSM)";
	case BS11_TRX_POWER_GSM_30mW:
		return "30mW (GSM)";
	case BS11_TRX_POWER_DCS_3W:
		return "3W (DCS)";
	case BS11_TRX_POWER_DCS_1W6:
		return "1.6W (DCS)";
	case BS11_TRX_POWER_DCS_500mW:
		return "500mW (DCS)";
	case BS11_TRX_POWER_DCS_160mW:
		return "160mW (DCS)";
	default:
		return "unknown value";
	}
}

static const char *obj_name(struct abis_om_fom_hdr *foh)
{
	static char retbuf[256];

	retbuf[0] = 0;

	switch (foh->obj_class) {
	case NM_OC_BS11:
		strcat(retbuf, "BS11 ");
		switch (foh->obj_inst.bts_nr) {
		case BS11_OBJ_PA:
			sprintf(retbuf+strlen(retbuf), "Power Amplifier %d ",
				foh->obj_inst.ts_nr);
			break;
		}
		break;
	case NM_OC_SITE_MANAGER:
		strcat(retbuf, "SITE MANAGER ");
		break;
	}
	return retbuf;
}

static void print_state(struct tlv_parsed *tp)
{
	if (TLVP_PRESENT(tp, NM_ATT_BS11_BTS_STATE)) {
		u_int8_t phase, mbccu;
		if (TLVP_LEN(tp, NM_ATT_BS11_BTS_STATE) >= 1) {
			phase = *TLVP_VAL(tp, NM_ATT_BS11_BTS_STATE);
			printf("PHASE: %u %-20s ", phase & 0xf,
				bts_phase_name(phase));
		}
		if (TLVP_LEN(tp, NM_ATT_BS11_BTS_STATE) >= 2) {
			mbccu = *(TLVP_VAL(tp, NM_ATT_BS11_BTS_STATE)+1);
			printf("MBCCU0: %-11s MBCCU1: %-11s ",
				mbccu_load_name(mbccu & 0xf), mbccu_load_name(mbccu >> 4));
		}
	}
	if (TLVP_PRESENT(tp, NM_ATT_BS11_E1_STATE) &&
	    TLVP_LEN(tp, NM_ATT_BS11_E1_STATE) >= 1) {
		u_int8_t e1_state = *TLVP_VAL(tp, NM_ATT_BS11_E1_STATE);
		printf("Abis-link: %-9s ", linkstate_name(e1_state & 0xf));
	}
	printf("\n");
}

static int print_attr(struct tlv_parsed *tp)
{
	if (TLVP_PRESENT(tp, NM_ATT_BS11_ESN_PCB_SERIAL)) {
		printf("\tBS-11 ESN PCB Serial Number: %s\n",
			TLVP_VAL(tp, NM_ATT_BS11_ESN_PCB_SERIAL));
	}
	if (TLVP_PRESENT(tp, NM_ATT_BS11_ESN_HW_CODE_NO)) {
		printf("\tBS-11 ESN Hardware Code Number: %s\n",
			TLVP_VAL(tp, NM_ATT_BS11_ESN_HW_CODE_NO)+6);
	}
	if (TLVP_PRESENT(tp, NM_ATT_BS11_ESN_FW_CODE_NO)) {
		printf("\tBS-11 ESN Firmware Code Number: %s\n",
			TLVP_VAL(tp, NM_ATT_BS11_ESN_FW_CODE_NO)+6);
	}
#if 0
	if (TLVP_PRESENT(tp, NM_ATT_BS11_BOOT_SW_VERS)) {
		printf("BS-11 Boot Software Version: %s\n",
			TLVP_VAL(tp, NM_ATT_BS11_BOOT_SW_VERS)+6);
	}
#endif
	if (TLVP_PRESENT(tp, NM_ATT_ABIS_CHANNEL) &&
	    TLVP_LEN(tp, NM_ATT_ABIS_CHANNEL) >= 3) {
		struct abis_nm_channel *chan = 
			(struct abis_nm_channel*) TLVP_VAL(tp, NM_ATT_ABIS_CHANNEL)-1;
		printf("\tE1 Channel: Port=%u Timeslot=%u ",
			chan->bts_port, chan->timeslot);
		if (chan->subslot == 0xff)
			printf("(Full Slot)\n");
		else
			printf("Subslot=%u\n", chan->subslot);
	}
	if (TLVP_PRESENT(tp, NM_ATT_TEI))
		printf("\tTEI: %d\n", *TLVP_VAL(tp, NM_ATT_TEI));
	if (TLVP_PRESENT(tp, NM_ATT_BS11_TXPWR) &&
	    TLVP_LEN(tp, NM_ATT_BS11_TXPWR) >= 1) {
		printf("\tTRX Power: %s\n",
			trx_power_name(*TLVP_VAL(tp, NM_ATT_BS11_TXPWR)));
	}

	return 0;
}

/* handle a response from the BTS to a GET STATE command */
static int handle_state_resp(enum abis_bs11_phase state)
{
	int rc = 0;

	switch (state) {
	case BS11_STATE_WARM_UP:
	case BS11_STATE_LOAD_SMU_SAFETY:
	case BS11_STATE_LOAD_SMU_INTENDED:
	case BS11_STATE_LOAD_MBCCU:
		break;
	case BS11_STATE_SOFTWARE_RQD:
		bs11cfg_state = STATE_SWLOAD;
		/* send safety load. Use g_bts as private 'param'
		 * argument, so our swload_cbfn can distinguish
		 * a safety load from a regular software */
		if (file_is_readable(fname_safety))
			rc = abis_nm_software_load(g_bts, fname_safety,
						   win_size, param_forced,
						   swload_cbfn, g_bts);
		else
			fprintf(stderr, "No valid Safety Load file \"%s\"\n",
				fname_safety);
		break;
	case BS11_STATE_WAIT_MIN_CFG:
	case BS11_STATE_WAIT_MIN_CFG_2:
		bs11cfg_state = STATE_SWLOAD;
		rc = create_objects(g_bts);
		break;
	case BS11_STATE_MAINTENANCE:
		if (command) {
			if (!strcmp(command, "disconnect"))
				abis_nm_bs11_factory_logon(g_bts, 0);
			else if (!strcmp(command, "reconnect"))
				rc = abis_nm_bs11_bsc_disconnect(g_bts, 1);
			else if (!strcmp(command, "software")
			    && bs11cfg_state != STATE_SWLOAD) {
				bs11cfg_state = STATE_SWLOAD;
				/* send software (FIXME: over A-bis?) */
				if (file_is_readable(fname_software))
					rc = abis_nm_bs11_load_swl(g_bts, fname_software,
								   win_size, param_forced,
								   swload_cbfn);
				else
					fprintf(stderr, "No valid Software file \"%s\"\n",
						fname_software);
			} else if (!strcmp(command, "delete-trx1")) {
				abis_nm_bs11_delete_object(g_bts, BS11_OBJ_BBSIG, 1);
				abis_nm_bs11_delete_object(g_bts, BS11_OBJ_PA, 1);
				sleep(5);
				abis_nm_bs11_factory_logon(g_bts, 0);
				command = NULL;
			} else if (!strcmp(command, "create-trx1")) {
				create_trx1(g_bts);
				sleep(5);
				abis_nm_bs11_factory_logon(g_bts, 0);
				command = NULL;
			} else if (!strcmp(command, "oml-tei")) {
				abis_nm_bs11_conn_oml_tei(g_bts, 0, 1, 0xff, TEI_OML);
			} else if (!strcmp(command, "restart")) {
				abis_nm_bs11_restart(g_bts);
				command = NULL;
			}
		}
		break;
	case BS11_STATE_NORMAL:
		if (command) {
			if (!strcmp(command, "reconnect"))
				abis_nm_bs11_factory_logon(g_bts, 0);
			else if (!strcmp(command, "disconnect"))
				abis_nm_bs11_bsc_disconnect(g_bts, 0);
			else if (!strcmp(command, "query")) {
				bs11cfg_state = STATE_QUERY;
				abis_nm_bs11_get_serno(g_bts);
				abis_nm_bs11_get_oml_tei_ts(g_bts);
				abis_nm_bs11_get_trx_power(&g_bts->trx[0]);
				abis_nm_bs11_get_trx_power(&g_bts->trx[1]);
				sleep(5);
				abis_nm_bs11_factory_logon(g_bts, 0);
				command = NULL;
			}
		} else if (param_disconnect) {
			param_disconnect = 0;
			abis_nm_bs11_bsc_disconnect(g_bts, 0);
			if (param_restart) {
				param_restart = 0;
				abis_nm_bs11_restart(g_bts);
			}
		}
		break;
	default:
		break;
	}
	return rc;
}

/* handle a fully-received message/packet from the RS232 port */
int handle_serial_msg(struct msgb *rx_msg)
{
	struct abis_om_hdr *oh;
	struct abis_om_fom_hdr *foh;
	struct tlv_parsed tp;
	int rc = -1;

#if 0
	if (rx_msg->len < LAPD_HDR_LEN
			  + sizeof(struct abis_om_fom_hdr)
			  + sizeof(struct abis_om_hdr)) {
		if (!memcmp(rx_msg->data + 2, too_fast,
			    sizeof(too_fast))) {
			fprintf(stderr, "BS11 tells us we're too "
				"fast, try --delay bigger than %u\n",
				delay_ms);
			return -E2BIG;
		} else
			fprintf(stderr, "unknown BS11 message\n");
	}
#endif

	oh = (struct abis_om_hdr *) msgb_l2(rx_msg);
	foh = (struct abis_om_fom_hdr *) oh->data;
	switch (foh->msg_type) {
	case NM_MT_BS11_LMT_LOGON_ACK:
		printf("LMT LOGON: ACK\n\n");
		if (bs11cfg_state == STATE_NONE)
			bs11cfg_state = STATE_LOGON_ACK;
		rc = abis_nm_bs11_get_state(g_bts);
		break;
	case NM_MT_BS11_LMT_LOGOFF_ACK:
		printf("LMT LOGOFF: ACK\n");
		exit(0);
		break;
	case NM_MT_BS11_GET_STATE_ACK:
		rc = abis_nm_tlv_parse(&tp, foh->data, oh->length-sizeof(*foh));
		print_state(&tp);
		if (TLVP_PRESENT(&tp, NM_ATT_BS11_BTS_STATE) &&
		    TLVP_LEN(&tp, NM_ATT_BS11_BTS_STATE) >= 1)
			rc = handle_state_resp(*TLVP_VAL(&tp, NM_ATT_BS11_BTS_STATE));
		break;
	case NM_MT_GET_ATTR_RESP:
		printf("\n%s ATTRIBUTES:\n", obj_name(foh));
		abis_nm_tlv_parse(&tp, foh->data, oh->length-sizeof(*foh));
		rc = print_attr(&tp);
		//hexdump(foh->data, oh->length-sizeof(*foh));
		break;
	default:
		rc = abis_nm_rcvmsg(rx_msg);
	}
	if (rc < 0) {
		perror("ERROR in main loop");
		//break;
	}
	if (rc == 1)
		return rc;

	switch (bs11cfg_state) {
	case STATE_NONE:
		abis_nm_bs11_factory_logon(g_bts, 1);
		break;
	case STATE_LOGON_ACK:
		schedule_timer(&status_timer, 5, 0);
		break;
	default:
		break;
	}

	return rc;
}

int nm_state_event(enum nm_evt evt, u_int8_t obj_class, void *obj,
		   struct gsm_nm_state *old_state, struct gsm_nm_state *new_state)
{
	return 0;
}

void status_timer_cb(void *data)
{
	abis_nm_bs11_get_state(g_bts);
}

static void print_banner(void)
{
	printf("bs11_config (C) 2009 by Harald Welte and Dieter Spaar\n");
	printf("This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY\n\n");
}

static void print_help(void)
{
	printf("bs11_config [options] [command]\n");
	printf("\nSupported options:\n");
	printf("\t-h --help\t\t\tPrint this help text\n");
	printf("\t-p --port </dev/ttyXXX>\t\tSpecify serial port\n");
	printf("\t-s --software <file>\t\tSpecify Software file\n");
	printf("\t-S --safety <file>\t\tSpecify Safety Load file\n");
	printf("\t-d --delay <ms>\t\tSpecify delay in milliseconds\n");
	printf("\t-D --disconnect\t\t\tDisconnect BTS from BSC\n");
	printf("\t-w --win-size <num>\t\tSpecify Window Size\n");
	printf("\t-f --forced\t\t\tForce Software Load\n");
	printf("\nSupported commands:\n");
	printf("\tquery\t\tQuery the BS-11 about serial number and configuration\n");
	printf("\tdisconnect\tDisconnect A-bis link (go into administrative state)\n");
	printf("\tresconnect\tReconnect A-bis link (go into normal state)\n");
	printf("\trestart\t\tRestart the BTS\n");
	printf("\tsoftware\tDownload Software (only in administrative state)\n");
	printf("\tcreate-trx1\tCreate objects for TRX1 (Danger: Your BS-11 might overheat)\n");
	printf("\tdelete-trx1\tDelete objects for TRX1\n");
}

static void handle_options(int argc, char **argv)
{
	int option_index = 0;
	print_banner();

	while (1) {
		int c;
		static struct option long_options[] = {
			{ "help", 0, 0, 'h' },
			{ "port", 1, 0, 'p' },
			{ "software", 1, 0, 's' },
			{ "safety", 1, 0, 'S' },
			{ "delay", 1, 0, 'd' },
			{ "disconnect", 0, 0, 'D' },
			{ "win-size", 1, 0, 'w' },
			{ "forced", 0, 0, 'f' },
			{ "restart", 0, 0, 'r' },
		};

		c = getopt_long(argc, argv, "hp:s:S:td:Dw:fra:",
				long_options, &option_index);

		if (c == -1)
			break;

		switch (c) {
		case 'h':
			print_help();
			exit(0);
		case 'p':
			serial_port = optarg;
			break;
		case 's':
			fname_software = optarg;
			break;
		case 'S':
			fname_safety = optarg;
			break;
		case 'd':
			delay_ms = atoi(optarg);
			break;
		case 'w':
			win_size = atoi(optarg);
			break;
		case 'D':
			param_disconnect = 1;
			break;
		case 'f':
			param_forced = 1;
			break;
		case 'r':
			param_disconnect = 1;
			param_restart = 1;
			break;
		default:
			break;
		}
	}
	if (optind < argc)
		command = argv[optind];
}

static int num_sigint;

static void signal_handler(int signal)
{
	fprintf(stdout, "\nsignal %u received\n", signal);

	switch (signal) {
	case SIGINT:
		num_sigint++;
		abis_nm_bs11_factory_logon(g_bts, 0);
		if (num_sigint >= 3)
			exit(0);
		break;
	}
}

int main(int argc, char **argv)
{
	struct gsm_network *gsmnet;
	int rc;

	handle_options(argc, argv);

	gsmnet = gsm_network_init(1, 1, 1, GSM_BTS_TYPE_BS11);
	if (!gsmnet) {
		fprintf(stderr, "Unable to allocate gsm network\n");
		exit(1);
	}
	g_bts = &gsmnet->bts[0];

	rc = rs232_setup(serial_port, delay_ms);
	if (rc < 0) {
		fprintf(stderr, "Problem setting up serial port\n");
		exit(1);
	}

	signal(SIGINT, &signal_handler);

	abis_nm_bs11_factory_logon(g_bts, 1);
	//abis_nm_bs11_get_serno(g_bts);

	status_timer.cb = status_timer_cb;

	while (1) {
		bsc_select_main();
	}

	abis_nm_bs11_factory_logon(g_bts, 0);

	exit(0);
}