drop files unrelated to osmo-mgw
These either remain from openbsc.git or slipped in while applying recent
patches from openbsc.git and do not belong in osmo-mgw.
The ctrl_test_runner.py from openbsc.git still sticks around, but osmo-bsc_mgcp
has no CTRL interface (yet). If it gets one, we can re-add the
ctrl_test_runner.
Change-Id: I623ba8c053bef91a327e58de214e05f0d6768605
diff --git a/doc/BS11-OML.txt b/doc/BS11-OML.txt
deleted file mode 100644
index e5c3299..0000000
--- a/doc/BS11-OML.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-The Siemens BS-11 supports the following additional GSM 12.21 OML operations:
-
-
-CREATE OBJECT
-
-abis_om_fom_hdr.obj_class can be
-A3:
-A5: ALCO, BBSIG, CCLK, GPSU, LI, PA
-A8: EnvaBTSE
-A9: BPORT
-
-the abis_om_obj_inst.trx_nr field indicates the index of object, whereas the
-abis_om_fom_hdr.bts_nr indicates the type of the object.
-
-enum abis_bs11_objtype {
- BS11_OBJ_ALCO = 0x01,
- BS11_OBJ_BBSIG = 0x02, /* obj_class: 0,1 */
- BS11_OBJ_TRX1 = 0x03, /* only DEACTIVATE TRX1 */
- BS11_OBJ_CCLK = 0x04,
- BS11_OBJ_GPSU = 0x06,
- BS11_OBJ_LI = 0x07,
- BS11_OBJ_PA = 0x09, /* obj_class: 0, 1*/
-};
-
-In case of CREATE ENVABTSE, the abis_om_obj_inst.trx_nr indicates the EnvaBTSEx
-number.
-
-In case of A9 (CREAETE BPORT), the abis_om_obj_inst.bts_nr indicates which BPORT
-shall be used.
-
-
diff --git a/doc/call-routing.txt b/doc/call-routing.txt
deleted file mode 100644
index 3402f9e..0000000
--- a/doc/call-routing.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Call routing in OpenBSC
-
-Flow of events:
-
- # MO call initiated by MS, CHANNEL RQD, IMMEDIATE ASSIGN
- # MS sends CC SETUP message, we assume already on TCH/H FACCH
- # OpenBSC does a subscriber lookup based on the target extension
- * If a subscriber is found:
- # send CALL PROCEEDING message to MO
- # page the MT subscriber and ask itI to ask for TCH/H
- # once paging completes, we have the TCH/H for the MT end
- # send SETUP to MT
- # receive CALL CONFIRMED from MT
- # set-up the TRAU mux mapping between the E1 subslots for both TCH/H
- # receive ALERTING from MT, route ALERTING to MO
- # receive CONNECT from MT, confirm to MT with CONNECT_ACK
- # send a CONNECT message to MO, receive CONNECT_ACK from MO
- * If subscriber is not found:
- # send RELEASE COMPLETE with apropriate cause to MO (1: unalloacated 3: no route)
-
-
-
-Thoughts about RR/MM:
-
-* we allocate RR/MM entities on demand, when we need them
diff --git a/doc/channel_release.txt b/doc/channel_release.txt
deleted file mode 100644
index c9cdfeb..0000000
--- a/doc/channel_release.txt
+++ /dev/null
@@ -1,95 +0,0 @@
-
-GSM 04.08 7.1.7 / 9.1.7 RR CHANNEL RELESE
-
-RSL 08.58 3.4 / ? RLL Link Release Request
-
-RSL 08.58 4.6 / 8.4.5 DEACTivate SACCH
- * Deactivate SACCH according to Channel Release Proc 04.08
- * to be sent after RR CHANNEL RELEASE is sent to MS
-
-RSL 08.58 4.7 / 8.4.14 RF CHANnel RELease
- * tells the BTS to release a radio channel
- * "when an activated radio channel is no longer needed"
- * BTS responds with RF CHANnel RELease ACKnowledge
-
-
-GSM 04.08 3.4.13: RR connection release procedure
-
-* network sends RR CHANNEL RELEASE to MS on the DCCH
- * start T3109
- * deactivate SACCH
-* MS disconnects main signalling link (by sending DISC)
- * all other data links are disconnected by local end link release
-* network receives DISC (BTS sends RLL REL IND to BSC)
- * stop T3109
- * start T3111
-* when T3111 times out, the network can reuse the channls
-* if T3109 times out, the network deactivates the channels
- and can reuse them
- * this probably means simply RF CHANnel RELease
-
-
-== Implementation in OpenBSC ==
-
-There are two possible reasons a gsm_subscriber_connection
-will be released. One is a network failure, the other is
-the completion of an operation/transaction.
-
-=== Failure ===
-The BSC API will call the gsm_04_08.c:gsm0408_clear_request callback
-and the MSC part will release all transactions, operations and such
-and the channels will be released as error case.
-
-=== Success ===
-Every time an 'operation' or 'transaction' is finished msc_release_connection
-will be called and it will determine if the gsm_subscriber_connection can
-be released.
-
-In case it can be released bsc_api.c:gsm0808_clear will be called
-which will release all lchan's associated with the connection. For the
-primary channel a SACH Deactivate will be send with the release
-reason NORMAL RELEASE.
-
-
-bsc_api.c:gsm0808_clear
- * Release a channel used for handover
- * Release the primary lchan with normal release, SACH deactivate
-
-chan_alloc.c:lchan_release(chan, sacch_deactivate, reason)
- * Start the release procedure. It is working in steps with callbacks
- coming from the abis_rsl.c code.
- * Release all SAPI's > 0 as local end (The BTS should send a
- REL_CONF a message)
- * Send SACH Deactivate on SAPI=0 if required.
- * Start T3109 (stop it when the main signalling link is disconnected)
- or when the channel released. On timeout start the error handling.
- * abis_rsl.c schedules the RSL_MT_RF_CHAN_REL once all SAPI's are
- released and after T3111 has timed out or there is an error.
-
-RX of RELease INDication:
- * Calls internal rsl_handle_release which might release the RF.
-
-RX of RELease CONFirmation:
- * Calls internal rsl_handle_release which might release the RF.
-
-* RX of RF_CHAN_REL_ACK
- * call lchan_free()
-
-
-=== Integration with SMS ===
-
-* RX of CP_ERROR or unimplemented MT
- * trigger trans_free() which will msc_release_connection()
-
-* CP TC1* expired while waiting for CP-ACK
- * trigger trans_free() which will msc_release_connection()
-
-* RX of RP_ERROR
- * trigger trans_free() which will msc_release_connection()
-
-* TX of CP-ACK in MT DELIVER
- * trigger trans_free() which will msc_release_connection()
-
-* RX of CP-ACK in MO SUBMIT
- * trigger trans_free() which will msc_release_connection()
-
diff --git a/doc/e1-data-model.txt b/doc/e1-data-model.txt
deleted file mode 100644
index 509004f..0000000
--- a/doc/e1-data-model.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-E1 related data model
-
-This data model describes the physical relationship of the individual
-parts in the network, it is not the logical/protocol side of the GSM
-network.
-
-A BTS is connected to the BSC by some physical link. It could be an actual
-E1 link, but it could also be abis-over-IP with a mixture of TCP and RTP/UDP.
-
-To further complicate the fact, multiple BTS can share one such pysical
-link. On a single E1 line, we can easily accomodate up to three BTS with
-two TRX each.
-
-Thus, it is best for OpenBSC to have some kind of abstraction layer. The BSC's
-view of a BTS connected to it. We call this 'bts_link'. A bts_link can be
-* all the TCP and UDP streams of a Abis-over-IP BTS
-* a set of E1 timeslots for OML, RSL and TRAU connections on a E1 link
-* a serial line exclusively used for OML messages (T-Link)
-
-A bts_link can be registered with the OpenBSC core at runtime.
-
-struct trx_link {
- struct gsm_bts_trx *trx;
-};
-
-struct bts_link {
- struct gsm_bts *bts;
- struct trx_link trx_links[NUM_TRX];
-};
-
-Interface from stack to input core:
-======================================================================
-int abis_rsl_sendmsg(struct msgb *msg);
- send a message through a RSL link to the TRX specified by the caller in
- msg->trx.
-
-int abis_rsl_rcvmsg(struct msgb *msg);
- receive a message from a RSL link from the TRX specified by the
- caller in msg->trx.
-
-int abis_nm_sendmsg(struct msgb *msg);
- send a message through a OML link to the BTS specified by the caller in
- msg->trx->bts. The caller can just use bts->c0 to get the first TRX
- in a BTS. (OML messages are not really sent to a TRX but to the BTS)
-
-int abis_nm_rcvmsg(struct msgb *msg);
- receive a message from a OML link from the BTS specified by the caller
- in msg->trx->bts. The caller can just use bts->c0 to get the first
- TRX in a BTS.
-
-int abis_link_event(int event, void *data);
- signal some event (such as layer 1 connect/disconnect) from the
- input core to the stack.
-
-int subch_demux_in(mx, const uint8_t *data, int len);
- receive 'len' bytes from a given E1 timeslot (TRAU frames)
-
-int subchan_mux_out(mx, uint8_t *data, int len);
- obtain 'len' bytes of output data to be sent on E1 timeslot
-
-Intrface by Input Core for Input Plugins
-======================================================================
-
-int btslink_register_plugin();
-
-
-Configuration for the E1 input module
-======================================================================
-
-BTS
- BTS number
- number of TRX
- OML link
- E1 line number
- timeslot number
- [subslot number]
- SAPI
- TEI
- for each TRX
- RSL link
- E1 line number
- timeslot number
- [subslot number]
- SAPI
- TEI
- for each TS
- E1 line number
- timeslot number
- subslot number
-
-
-E1 input module data model
-======================================================================
-
-
-enum e1inp_sign_type {
- E1INP_SIGN_NONE,
- E1INP_SIGN_OML,
- E1INP_SIGN_RSL,
-};
-
-struct e1inp_sign_link {
- /* list of signalling links */
- struct llist_head list;
-
- enum e1inp_sign_type type;
-
- /* trx for msg->trx of received msgs */
- struct gsm_bts_trx *trx;
-
- /* msgb queue of to-be-transmitted msgs */
- struct llist_head tx_list;
-
- /* SAPI and TEI on the E1 TS */
- uint8_t sapi;
- uint8_t tei;
-}
-
-enum e1inp_ts_type {
- E1INP_TS_TYPE_NONE,
- E1INP_TS_TYPE_SIGN,
- E1INP_TS_TYPE_TRAU,
-};
-
-/* A timeslot in the E1 interface */
-struct e1inp_ts {
- enum e1inp_ts_type type;
- struct e1inp_line *line;
- union {
- struct {
- struct llist_head sign_links;
- } sign;
- struct {
- /* subchannel demuxer for frames from E1 */
- struct subch_demux demux;
- /* subchannel muxer for frames to E1 */
- struct subch_mux mux;
- } trau;
- };
- union {
- struct {
- /* mISDN driver has one fd for each ts */
- struct osmo_fd;
- } misdn;
- } driver;
-};
-
-struct e1inp_line {
- unsigned int num;
- char *name;
-
- struct e1inp_ts ts[NR_E1_TS];
-
- char *e1inp_driver;
- void *driver_data;
-};
-
-/* Call from the Stack: configuration of this TS has changed */
-int e1inp_update_ts(struct e1inp_ts *ts);
-
-/* Receive a packet from the E1 driver */
-int e1inp_rx_ts(struct e1inp_ts *ts, struct msgb *msg,
- uint8_t tei, uint8_t sapi);
-
-/* Send a packet, callback function in the driver */
-int e1driver_tx_ts(struct e1inp_ts *ts, struct msgb *msg)
-
-
-struct e1inp_driver {
- const char *name;
- int (*want_write)(struct e1inp_ts *ts);
-};
diff --git a/doc/examples/osmo-bsc/osmo-bsc.cfg b/doc/examples/osmo-bsc/osmo-bsc.cfg
deleted file mode 100644
index 7c10e9d..0000000
--- a/doc/examples/osmo-bsc/osmo-bsc.cfg
+++ /dev/null
@@ -1,101 +0,0 @@
-!
-! OsmoBSC (0.9.14+gitr1+3d331c0062bb0c9694dbd4d1eab7adc58138c3ae) configuration saved from vty
-!!
-password foo
-!
-!
-line vty
- no login
-!
-e1_input
- e1_line 0 driver ipa
-network
- network country code 1
- mobile network code 1
- short name OsmoBSC
- long name OsmoBSC
- auth policy closed
- location updating reject cause 13
- encryption a5 0
- neci 1
- paging any use tch 0
- rrlp mode none
- mm info 1
- handover 0
- handover window rxlev averaging 10
- handover window rxqual averaging 1
- handover window rxlev neighbor averaging 10
- handover power budget interval 6
- handover power budget hysteresis 3
- handover maximum distance 9999
- bts 0
- type nanobts
- band DCS1800
- cell_identity 0
- location_area_code 1
- training_sequence_code 7
- base_station_id_code 63
- ms max power 15
- cell reselection hysteresis 4
- rxlev access min 0
- channel allocator ascending
- rach tx integer 9
- rach max transmission 7
- dtx uplink force
- dtx downlink
- ip.access unit_id 0 0
- oml ip.access stream_id 255 line 0
- neighbor-list mode manual-si5
- neighbor-list add arfcn 100
- neighbor-list add arfcn 200
- si5 neighbor-list add arfcn 10
- si5 neighbor-list add arfcn 20
- gprs mode none
- trx 0
- rf_locked 0
- arfcn 871
- nominal power 23
- max_power_red 20
- rsl e1 tei 0
- timeslot 0
- phys_chan_config CCCH+SDCCH4
- hopping enabled 0
- timeslot 1
- phys_chan_config TCH/F
- hopping enabled 0
- timeslot 2
- phys_chan_config TCH/F
- hopping enabled 0
- timeslot 3
- phys_chan_config TCH/F
- hopping enabled 0
- timeslot 4
- phys_chan_config TCH/F
- hopping enabled 0
- timeslot 5
- phys_chan_config TCH/F
- hopping enabled 0
- timeslot 6
- phys_chan_config TCH/F
- hopping enabled 0
- timeslot 7
- phys_chan_config TCH/F
- hopping enabled 0
-cs7 instance 1
- point-code 3.0.0
- sccp-address bsc_local
- point-code 3.0.0
- sccp-address msc_remote
- point-code 1.0.0
-msc
- bsc-addr bsc_local
- msc-addr msc_remote
- ip.access rtp-base 4000
- timeout-ping 20
- timeout-pong 5
- dest 192.168.100.11 6666 0
- access-list-name msc-list
- no access-list-name
-bsc
- no access-list-name
- access-list-name bsc-list
diff --git a/doc/examples/osmo-bsc_nat/black-list.cfg b/doc/examples/osmo-bsc_nat/black-list.cfg
deleted file mode 100644
index d36179d..0000000
--- a/doc/examples/osmo-bsc_nat/black-list.cfg
+++ /dev/null
@@ -1 +0,0 @@
-678012512671923:6:6:
diff --git a/doc/examples/osmo-bsc_nat/bscs.cfg b/doc/examples/osmo-bsc_nat/bscs.cfg
deleted file mode 100644
index 176debe..0000000
--- a/doc/examples/osmo-bsc_nat/bscs.cfg
+++ /dev/null
@@ -1,13 +0,0 @@
-nat
- bsc 0
- token lol
- location_area_code 1234
- description bsc
- max-endpoints 32
- paging forbidden 0
- bsc 1
- token wat
- location_area_code 5678
- description bsc
- max-endpoints 32
- paging forbidden 0
diff --git a/doc/examples/osmo-bsc_nat/osmo-bsc_nat.cfg b/doc/examples/osmo-bsc_nat/osmo-bsc_nat.cfg
deleted file mode 100644
index e835e06..0000000
--- a/doc/examples/osmo-bsc_nat/osmo-bsc_nat.cfg
+++ /dev/null
@@ -1,66 +0,0 @@
-!
-! OsmoBSCNAT (0.12.0.266-2daa9) configuration saved from vty
-!!
-!
-log stderr
- logging filter all 1
- logging color 1
- logging timestamp 0
- logging level all debug
- logging level rll notice
- logging level cc notice
- logging level mm notice
- logging level rr notice
- logging level rsl notice
- logging level nm info
- logging level mncc notice
- logging level pag notice
- logging level meas notice
- logging level sccp notice
- logging level msc notice
- logging level mgcp notice
- logging level ho notice
- logging level db notice
- logging level ref notice
- logging level gprs debug
- logging level ns info
- logging level bssgp debug
- logging level llc debug
- logging level sndcp debug
- logging level nat notice
- logging level ctrl notice
- logging level smpp debug
- logging level lglobal notice
- logging level llapd notice
- logging level linp notice
- logging level lmux notice
- logging level lmi notice
- logging level lmib notice
- logging level lsms notice
-!
-line vty
- no login
-!
-mgcp
- bind ip 0.0.0.0
- bind port 2427
- rtp bts-base 4000
- rtp net-base 16000
- rtp ip-dscp 0
- no rtcp-omit
- sdp audio-payload number 126
- sdp audio-payload name AMR/8000
- loop 0
- number endpoints 1
- call-agent ip 127.0.0.1
- rtp transcoder-base 0
- transcoder-remote-base 4000
-nat
- msc ip 127.0.0.1
- msc port 5000
- timeout auth 2
- timeout ping 20
- timeout pong 5
- ip-dscp 0
- bscs-config-file bscs.cfg
- access-list bla imsi-allow ^11$
diff --git a/doc/examples/osmo-gbproxy/osmo-gbproxy-legacy.cfg b/doc/examples/osmo-gbproxy/osmo-gbproxy-legacy.cfg
deleted file mode 100644
index 15fd74a..0000000
--- a/doc/examples/osmo-gbproxy/osmo-gbproxy-legacy.cfg
+++ /dev/null
@@ -1,44 +0,0 @@
-!
-! OsmoGbProxy (UNKNOWN) configuration saved from vty
-!!
-!
-log stderr
- logging filter all 1
- logging color 1
- logging timestamp 0
- logging level all debug
- logging level gprs debug
- logging level ns info
- logging level bssgp debug
- logging level lglobal notice
- logging level llapd notice
- logging level linp notice
- logging level lmux notice
- logging level lmi notice
- logging level lmib notice
- logging level lsms notice
-!
-line vty
- no login
-!
-ns
- nse 666 nsvci 666
- nse 666 remote-role sgsn
-! nse 666 encapsulation framerelay-gre
-! nse 666 remote-ip 172.16.1.70
-! nse 666 fr-dlci 666
- timer tns-block 3
- timer tns-block-retries 3
- timer tns-reset 3
- timer tns-reset-retries 3
- timer tns-test 30
- timer tns-alive 3
- timer tns-alive-retries 10
- encapsulation udp local-port 23000
-! encapsulation framerelay-gre enabled 1
-gbproxy
- sgsn nsei 666
- core-mobile-country-code 666
- core-mobile-network-code 6
- core-access-point-name none match-imsi ^666066|^66607
- tlli-list max-length 200
diff --git a/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg b/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
deleted file mode 100644
index 0c3917a..0000000
--- a/doc/examples/osmo-gbproxy/osmo-gbproxy.cfg
+++ /dev/null
@@ -1,25 +0,0 @@
-!
-! Osmocom Gb Proxy (0.9.0.404-6463) configuration saved from vty
-!!
-!
-line vty
- no login
-!
-gbproxy
- sgsn nsei 101
-ns
- nse 101 nsvci 101
- nse 101 remote-role sgsn
- nse 101 encapsulation udp
- nse 101 remote-ip 192.168.100.239
- nse 101 remote-port 7777
- timer tns-block 3
- timer tns-block-retries 3
- timer tns-reset 3
- timer tns-reset-retries 3
- timer tns-test 30
- timer tns-alive 3
- timer tns-alive-retries 10
- encapsulation framerelay-gre enabled 0
- encapsulation framerelay-gre local-ip 0.0.0.0
- encapsulation udp local-port 23000
diff --git a/doc/examples/osmo-gtphub/gtphub-example.txt b/doc/examples/osmo-gtphub/gtphub-example.txt
deleted file mode 100644
index 9c65f92..0000000
--- a/doc/examples/osmo-gtphub/gtphub-example.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-Here is a simple setup to test GTPHub operations. The IP addresses picked will
-work well only on a system that creates local addresses (127.0.0.123) on the
-fly (like linux) -- you may pick of course different IP addresses.
-
-Overview of the example setup:
-
- sgsnemu gtphub ggsn
- 127.0.0.1 <--> 127.0.0.3 127.0.0.4 <--> 127.0.0.2
-
-Prerequisites: openggsn.
-
-Have a local directory where you store config files and from which you launch
-the GSNs and the hub (they will store restart counter files in that dir).
-In it, have these config files:
-
-ggsn.conf:
-
- # GGSN local address
- listen 127.0.0.2
-
- # End User Addresses are picked from this range
- net 10.23.42.0/24
-
- pcodns1 8.8.8.8
-
- logfile /tmp/foo
-
-gtphub.conf:
-
- gtphub
- bind-to-sgsns 127.0.0.3
- bind-to-ggsns 127.0.0.4
- ggsn-proxy 127.0.0.2
- end
-
-
-(
-You may omit the ggsn-proxy if GRX ares is working, or if you add the GRX
-address and GGSN IP address to /etc/hosts something like:
-
- 127.0.0.2 internet.mnc070.mcc901.gprs
-
-)
-
-
-Once the config files are in place, start the programs, in separate terminals.
-GGSN and SGSN need to be started with root priviliges to be able to create tun
-interfaces. GTPHub may run as unprivileged user.
-
-The LD_LIBRARY_PATH below may be needed if OpenGGSN installed to /usr/local.
-
-
-1. GGSN:
-
- sudo -s
- cd <your-test-dir>
- LD_LIBRARY_PATH=/usr/local/lib /usr/local/bin/ggsn -f -c ./ggsn.conf
-
-2. GTPHub:
-
- cd <your-test-dir>
- path/to/openbsc/openbsc/src/gprs/osmo-gtphub -c gtphub.conf #-e 1 #for DEBUG level
-
-3. SGSN tests:
-
- sudo -s
- cd <your-test-dir>
- /usr/local/bin/sgsnemu --createif -l 127.0.0.1 -r 127.0.0.3 --imsi 420001214365100 --contexts=3
-
-Add more SGSNs using different IMSIs and local ports (if the same IMSI is used,
-the GGSN will reuse TEIs and tunnels will be discarded automatically):
-
- /usr/local/bin/sgsnemu --createif -l 127.0.0.11 -r 127.0.0.3 --imsi 420001214365300 --contexts=3
-
-This shows the basic setup of GTPHub. Testing internet traffic via sgsnemu
-still needs some effort to announce a mobile subscriber or the like (I have
-used a real BTS, osmo-sgsn and a testing SIM in a web phone, instead).
-
-The core capability of GTPHub is to manage more than two GSNs, e.g. an SGSN
-contacting various GGSNs over the single GTPHub link. You would configure the
-SGSN to use one fixed GGSN (sending to gtphub) and gtphub will resolve the
-GGSNs once it has received the messages. So the SGSN may be behind NAT (add
-"sgsn-use-sender" to gtphub.conf) and communicate to various GGSNs over a
-single link to gtphub.
-
-I hope this helps to get you going.
-Any suggestions/patches are welcome!
-
-~Neels
-
diff --git a/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg b/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg
deleted file mode 100644
index 3913d2c..0000000
--- a/doc/examples/osmo-gtphub/osmo-gtphub-1iface.cfg
+++ /dev/null
@@ -1,25 +0,0 @@
-!
-! Osmocom gtphub configuration
-!
-! This file is used for VTY tests, referenced by openbsc/osmoappdesc.py
-! For the test, try to use most config commands.
-!
-
-line vty
- no login
-
-gtphub
- ! Local addresses to listen on and send from, both on one interface.
- ! The side towards SGSN uses nonstandard ports.
- bind-to-sgsns ctrl 127.0.0.1 12123 user 127.0.0.1 12153
- ! The GGSN side with standard ports.
- bind-to-ggsns 127.0.0.1
-
- ! Proxy: unconditionally direct all traffic to...
- sgsn-proxy 127.0.0.4
-
- ! Proxy with nonstandard ports or separate IPs:
- ggsn-proxy ctrl 127.0.0.3 2123 user 127.0.0.5 2152
-
- ! Add a name server for GGSN resolution
- grx-dns-add 192.168.0.1
diff --git a/doc/examples/osmo-gtphub/osmo-gtphub.cfg b/doc/examples/osmo-gtphub/osmo-gtphub.cfg
deleted file mode 100644
index 0dc4150..0000000
--- a/doc/examples/osmo-gtphub/osmo-gtphub.cfg
+++ /dev/null
@@ -1,25 +0,0 @@
-!
-! Osmocom gtphub configuration
-!
-
-line vty
- no login
-
-gtphub
- ! Local addresses to listen on and send from, each on standard ports
- ! 2123 and 2152. Setting these addresses is mandatory.
- bind-to-sgsns 127.0.0.1
- bind-to-ggsns 127.0.0.2
-
- ! Local nonstandard ports or separate IPs:
- !bind-to-sgsns ctrl 127.0.0.1 2342 user 127.0.0.1 4223
-
- ! Proxy: unconditionally direct all traffic to...
- !ggsn-proxy 127.0.0.3
- !sgsn-proxy 127.0.0.4
-
- ! Proxy with nonstandard ports or separate IPs:
- !ggsn-proxy ctrl 127.0.0.3 2123 user 127.0.0.5 2152
-
- ! Add a name server for GGSN resolution
- !grx-dns-add 192.168.0.1
diff --git a/doc/examples/osmo-msc/osmo-msc.cfg b/doc/examples/osmo-msc/osmo-msc.cfg
deleted file mode 100644
index 1b1d192..0000000
--- a/doc/examples/osmo-msc/osmo-msc.cfg
+++ /dev/null
@@ -1,19 +0,0 @@
-!
-! OsmoMSC configuration saved from vty
-!
-line vty
- no login
-!
-network
- network country code 1
- mobile network code 1
- short name OsmoMSC
- long name OsmoMSC
- auth policy closed
- location updating reject cause 13
- encryption a5 0
- rrlp mode none
- mm info 1
-msc
- mgcpgw remote-ip 10.23.24.1
- assign-tmsi
diff --git a/doc/examples/osmo-sgsn/osmo-sgsn-accept-all.cfg b/doc/examples/osmo-sgsn/osmo-sgsn-accept-all.cfg
deleted file mode 100644
index 5e64342..0000000
--- a/doc/examples/osmo-sgsn/osmo-sgsn-accept-all.cfg
+++ /dev/null
@@ -1,27 +0,0 @@
-!
-! Osmocom SGSN configuration
-!
-!
-line vty
- no login
-!
-sgsn
- gtp local-ip 127.0.0.1
- ggsn 0 remote-ip 127.0.0.2
- ggsn 0 gtp-version 1
- auth-policy accept-all
-!
-ns
- timer tns-block 3
- timer tns-block-retries 3
- timer tns-reset 3
- timer tns-reset-retries 3
- timer tns-test 30
- timer tns-alive 3
- timer tns-alive-retries 10
- encapsulation udp local-ip 127.0.0.1
- encapsulation udp local-port 23000
- encapsulation framerelay-gre enabled 0
-!
-bssgp
-!
diff --git a/doc/examples/osmo-sgsn/osmo-sgsn.cfg b/doc/examples/osmo-sgsn/osmo-sgsn.cfg
deleted file mode 100644
index 06f035f..0000000
--- a/doc/examples/osmo-sgsn/osmo-sgsn.cfg
+++ /dev/null
@@ -1,29 +0,0 @@
-!
-! Osmocom SGSN configuration
-!
-!
-line vty
- no login
-!
-sgsn
- gtp local-ip 127.0.0.1
- ggsn 0 remote-ip 127.0.0.2
- ggsn 0 gtp-version 1
- auth-policy remote
- gsup remote-ip 127.0.0.1
- gsup remote-port 4222
-!
-ns
- timer tns-block 3
- timer tns-block-retries 3
- timer tns-reset 3
- timer tns-reset-retries 3
- timer tns-test 30
- timer tns-alive 3
- timer tns-alive-retries 10
- encapsulation udp local-ip 127.0.0.1
- encapsulation udp local-port 23000
- encapsulation framerelay-gre enabled 0
-!
-bssgp
-!
diff --git a/doc/gsm-hopping.txt b/doc/gsm-hopping.txt
deleted file mode 100644
index c964963..0000000
--- a/doc/gsm-hopping.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-according to GSM 05.02:
-
-general parameters from CCCH:
-* CA cell allocation of ARFCN's (System Information / BCCH)
-* FN: TDMA frame number (t1,t2,t3') in SCH
-
-specific parameters from channel assignment:
-* MA: mobile allocation, defines set of ARFCN's, up to 64
-* MAIO: index
-* HSN: hopping sequence generator number (0..64)
-
-
-hopping sequence generation (6.2.3):
-
-uint8_t rntable[114] = {
- 48, 98, 63, 1, 36, 95, 78, 102, 94, 73,
- 0, 64, 25, 81, 76, 59, 124, 23, 104, 100,
- 101, 47, 118, 85, 18, 56, 96, 86, 54, 2,
- 80, 34, 127, 13, 6, 89, 57, 103, 12, 74,
- 55, 111, 75, 38, 109, 71, 112, 29, 11, 88,
- 87, 19, 3, 68, 110, 26, 33, 31, 8, 45,
- 82, 58, 40, 107, 32, 5, 106, 92, 62, 67,
- 77, 108, 122, 37, 60, 66, 121, 42, 51, 126,
- 117, 114, 4, 90, 43, 52, 53, 113, 120, 72,
- 16, 49, 7, 79, 119, 61, 22, 84, 9, 97,
- 125, 99, 17, 123
-};
-
-/* mai=0 represents lowest ARFCN in the MA */
-
-
-uint8_t hopping_mai(uint8_t hsn, uint32_t fn, uint8_t maio,
- uint8_t t1, uint8_t t2, uint8_t t3_)
-{
- uint8_t mai;
-
- if (hsn == 0) /* cyclic hopping */
- mai = (fn + maio) % n;
- else {
- uint32_t m, m_, t_, s;
-
- m = t2 + rntable[(hsn xor (t1 % 64)) + t3];
- m_ = m % (2^NBIN);
- t_ = t3 % (2^NBIN);
- if (m_ < n then)
- s = m_;
- else
- s = (m_ + t_) % n;
- mai = (s + maio) % n;
- }
-
- return mai;
-}
-
diff --git a/doc/handover.txt b/doc/handover.txt
deleted file mode 100644
index ac19e87..0000000
--- a/doc/handover.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-Ideas about a handover algorithm
-======================================================================
-
-This is mostly based on the results presented in Chapter 8 of "Performance
-Enhancements in a Frequency Hopping GSM Network" by Thomas Toftegaard Nielsen
-and Joeroen Wigard.
-
-
-=== Reasons for performing handover ===
-
-Section 2.1.1: Handover used in their CAPACITY simulation:
-
-1) Interference Handover
-
-Average RXLEV is satisfactory high, but average RXQUAL too low indicates
-interference to the channel. Handover should be made.
-
-2) Bad Quality
-
-Averaged RXQUAL is lower than a threshold
-
-3) Low Level / Signal Strength
-
-Average RXLEV is lower than a threshold
-
-4) Distance Handover
-
-MS is too far away from a cell (measured by TA)
-
-5) Power budget / Better Cell
-
-RX Level of neighbor cell is at least "HO Margin dB" dB better than the
-current serving cell.
-
-=== Ideal parameters for HO algorithm ===
-
-Chapter 8, Section 2.2, Table 24:
-
-Window RXLEV averaging: 10 SACCH frames (no weighting)
-Window RXQUAL averaging: 1 SACCH frame (no averaging)
-Level Threashold: 1 of the last 1 AV-RXLEV values < -110dBm
-Quality Threshold: 3 of the last 4 AV-RXQUAL values >= 5
-Interference Threshold: 1 of the last AV-RXLEV > -85 dBm &
- 3 of the last 4 AV-RXQUAL values >= 5
-Power Budget: Level of neighbor cell > 3 dB better
-Power Budget Interval: Every 6 SACCH frames (6 seconds ?!?)
-Distance Handover: Disabled
-Evaluation rule 1: RXLEV of the candidate cell a tleast -104 dBm
-Evaluation rule 2: Level of candidate cell > 3dB better own cell
-Timer Successful HO: 5 SACCH frames
-Timer Unsuccessful HO: 1 SACCH frame
-
-In a non-frequency hopping case, RXQUAL threshold can be decreased to
-RXLEV >= 4
-
-When frequency hopping is enabled, the following additional parameters
-should be introduced:
-
-* No intra-cell handover
-* Use a HO Margin of 2dB
-
-=== Handover Channel Reservation ===
-
-In loaded network, each cell should reserve some channels for handovers,
-rather than using all of them for new call establishment. This reduces the
-need to drop calls due to failing handovers, at the expense of failing new call
-attempts.
-
-=== Dynamic HO Margin ===
-
-The handover margin (hysteresis) should depend on the RXQUAL. Optimal results
-were achieved with the following settings:
-* RXQUAL <= 4: 9 dB
-* RXQUAL == 5: 6 dB
-* RXQUAL >= 6: 1 dB
-
-
-
-== Actual Handover on a protocol level ==
-
-After the BSC has decided a handover shall be done, it has to
-
-# allocate a channel at the new BTS
-# allocate a handover reference
-# activate the channel on the BTS side using RSL CHANNEL ACTIVATION,
- indicating the HO reference
-# BTS responds with CHAN ACT ACK, including GSM frame number
-# BSC sends 04.08 HO CMD to MS using old BTS
-
diff --git a/doc/ipa-sccp.txt b/doc/ipa-sccp.txt
deleted file mode 100644
index 5d6719e..0000000
--- a/doc/ipa-sccp.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-
-IPA SCCP message flow in the BSC
-
-February, 2013 Holger Hans Peter Freyther
-
-CONTENTS
-
-1. SCCP inside the IPA header
-2. Supported SCCP message types
-3. Receiving SCCP messages
-4. Sending SCCP messages
-
-
-1. SCCP inside the IPA header
-
-Many Soft-MSCs implement something that is called SCCP/lite. This means
-that SCCP messages are transported inside a small multiplexing protocol
-over TCP/IP. This is an alternative to a full SIGTRAN implementation.
-
-The multiplexing protocol is the same as used with the sysmoBTS and the
-ip.access nanoBTS. It is a three byte header with two bytes for the length
-in network byte order and one byte for the type. The type to be used for
-SCCP is 0xFD.
-
- struct ipa_header {
- uint16_t length_in_network_order;
- uint8_t type;
- } __attribute__((packed));
-
-
-
-2. Supported SCCP message types
-
-To implement GSM 08.08 only a subset of SCCP messages need to be implemented.
-For transporting paging and reset messages SCCP UDT messages are used. For
-the connections with a Mobile Station (MS) a SCCP connection is opened. This
-means that the SCCP CR, SCCP CC, SCCP CREF, SCCP RLC, SCCP RLSD, SCCP DT1
-and SCCP IT messages are supported.
-
-
-3. Receiving SCCP UDT messages
-
-This is an illustration of the flow of messages. The IPA multiplexing protocol
-is used for various protocols. This means there is a central place where the
-multiplexing stream terminates. The stream is terminated in the osmo_bsc_msc.c
-file and the ipaccess_a_fd_cb method. For SCCP messages the SCCP dispatching
-sccp_system_incoming method is called. This function is implemented in the
-libosmo-sccp library.
-
-To receive UDT messages osmo_bsc_sccp.c:osmo_bsc_sccp_init is using the
-sccp_set_read function to register a callback for UDT messages. The callback
-is msc_sccp_read and it is calling bsc_handle_udt that is implemented in the
-osmo_bsc_bssap.c. This function will handle the GSM 08.08 BSSAP messages.
-Currently only the reset acknowledge and the paging messages are handled.
-
-The BSC currently does not accept incoming SCCP messages and is only opening
-SCCP connections to the MSC. When opening a connection the callbacks for state
-changes (connection confirmed, released, release complete) are set and a routine
-for handling incoming data. This registration is done in the osmo_bsc_sccp.c
-file and the bsc_create_new_connection method. The name of the callback is
-msc_outgoing_sccp_data and this will call bsc_handle_dt1 that is implemented
-in the osmo_bsc_bssap.c file. This will forward the messages to the right
-Mobile Station (MS).
-
-
-4. Sending SCCP messages
-
-There are three parts to sending that will be explained below. The first part
-is to send an entire SCCP frame (which includes the GSM 08.08 data) to the
-MSC. This is done by first registering the low level sending. sccp_system_init
-is called with the function that is responsible for sending a message. The
-msc_sccp_write_ipa will call the msc_queue_write function with the data and
-the right MSC connection. Below the msc_queue_write the IPA header will be
-prepended to the msg and then send to the MSC.
-
-The BSC supports multiple different A-link connections, the decision to pick
-the right MSC is done in this method. It is either done via the SCCP connection
-or the ctx pointer.
-
-When the BSC is starting a BSS RESET message will be sent to the MSC. The reset
-is created in osmo_bsc_msc.c:initialize_if_needed and sccp_write is called with
-the GSM 08.08 data and the connection to use. The libosmo-sccp library will
-embed it into a SCCP UDT message and call the msc_sccp_write_ipa method.
-
-When a new SCCP connection is to be created the bsc_create_new_connection
-in the osmo_bsc_sccp.c file. The sccp_connection_socket method will create
-the context for a SCCP connection. The state and data callback will be used
-to be notified about data and changes. Once the connection is configured the
-bsc_open_connection will be called that will ask the libosmo-sccp library to
-create a SCCP CR message using the sccp_connection_connect method. For active
-connections the sccp_connection_write method will be called.
-
-
-
diff --git a/doc/oml-interface.txt b/doc/oml-interface.txt
deleted file mode 100644
index 02bead7..0000000
--- a/doc/oml-interface.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-oml interface design notes
-
-problems:
-
-* there is no way how to tag a command sent to the BTS, with the response
- having the same tag to identify the originator of the command
-* therefore, we can have e.g. both the BSC and the OML interface send a
- SET ATTRIBUTE message, where the responses would end up at the wrong
- query.
-* The BTS has 10s to ACK/NACK a command. We do not run any timers.
-
-the only possible solutions i can imagine:
-* have some kind of exclusive locking, where the OML interface gets blocked
- from the BSC and is exclusively assigned to the OML console until all commands
- of the OML console have terminated. This can either be done explicitly
- dynamically or on demand
-
-* use the OML interface synchronously, i.e. always wait for the response from
- the BTS before
-
-* unilateral / unsolicited messages need to be broadcasted to both the BSC and
- the OML console
diff --git a/doc/osmo-nitb-data_structures.dot b/doc/osmo-nitb-data_structures.dot
deleted file mode 100644
index 81955e8..0000000
--- a/doc/osmo-nitb-data_structures.dot
+++ /dev/null
@@ -1,33 +0,0 @@
-digraph G {
- net [label="gsm_network"]
- bts [label="gsm_bts"]
- trx [label="gsm_bts_trx"]
- ts [label="gsm_bts_trx_ts"]
- lchan [label="gsm_lchan"]
- sub [label="gsm_subscriber"]
- subcon [label="gsm_subscriber_conn"]
- sccpcon [label="osmo_bsc_sccp_con"]
- subgrp [label="gsm_subscriber_group"]
-
- net -> bts
- bts -> trx
- trx -> ts
- ts -> lchan
-
- lchan -> ts
- ts -> trx
- trx -> bts
- bts -> net
-
- lchan -> subcon
-
- subcon -> sub
- subcon -> sccpcon
- subcon -> lchan
- subcon -> lchan [label="ho_lchan"]
- subcon -> bts
- subcon -> lchan [label="secondary_lchan"]
-
- sub -> subgrp
- subgrp -> net
-}
diff --git a/doc/paging.txt b/doc/paging.txt
deleted file mode 100644
index c597c22..0000000
--- a/doc/paging.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-
-GSM Paging implementation in OpenBSC
-
-== Code structure ==
-
-The code is implemented in the libbsc/paging.c file. The external
-interface is documented/specified in the include/openbsc/paging.h
-header file. The code is used by the NITB and BSC application.
-
-
-== Implementation ==
-
-Paging can be initiated in two ways. The standard way is to page by
-LAC. Each BTS has its own list/queue of outstanding paging operation.
-When a subscriber is paged one "struct paging_request" per BTS will
-be allocated and added to the tail of the list. The BTS is supposed
-to be configured to not repeat the paging.
-
-A paging_request will remain in the queue until a paging response or at
-the expiry of the T3113. Every 500 milliseconds a RSL paging command is
-send to the BTS. The 500 milliseconds is a throttling to not crash the
-ip.access nanoBTS. Once one paging_request has been handled it will be
-put at the end of the queue/list and the available slots for the BTS
-will be decreased.
-
-The available slots will be updated based on the paging load information
-element of the CCCH Load indication. If no paging slots are considered
-to be available and no load indication is sent a timer is started. The
-current timeout is 500 milliseconds and at the expiry of the timer the
-available slots will be set to 20.
-
-OpenBSC has the " paging free <-1-1024>" configuration option. In case
-there are less free channels than required no paging request will be
-sent to the BTS. Instead it will be attempted to send the paging request
-at the next timeout (500 milliseconds).
-
-== Limitation ==
-
-The paging throughput could be higher but this has lead to crashes on the
-ip.access nanoBTS in the past.
-
-== Configuration ==
-
-=== ip.access nanoBTS ===
-
-The current CCCH Load indication threshold is 10% and the period is 1 second.
-The code can be found inside the src/libbsc/bts_ipaccess_nanobts.c inside the
-nanobts_attr_bts array.
diff --git a/include/openbsc/gsm_04_14.h b/include/openbsc/gsm_04_14.h
deleted file mode 100644
index 3cdbe04..0000000
--- a/include/openbsc/gsm_04_14.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#pragma once
-
-#include <osmocom/gsm/protocol/gsm_04_14.h>
-
-int gsm0414_tx_close_tch_loop_cmd(struct gsm_subscriber_connection *conn,
- enum gsm414_tch_loop_mode loop_mode);
-int gsm0414_tx_open_loop_cmd(struct gsm_subscriber_connection *conn);
-int gsm0414_tx_act_emmi_cmd(struct gsm_subscriber_connection *conn);
-int gsm0414_tx_test_interface(struct gsm_subscriber_connection *conn,
- uint8_t tested_devs);
-int gsm0414_tx_reset_ms_pos_store(struct gsm_subscriber_connection *conn,
- uint8_t technology);
-
-int gsm0414_rcv_test(struct gsm_subscriber_connection *conn,
- struct msgb *msg);
diff --git a/include/openbsc/iu_dummy.h b/include/openbsc/iu_dummy.h
deleted file mode 100644
index d5e1428..0000000
--- a/include/openbsc/iu_dummy.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* Trivial switch-off of external Iu dependencies,
- * allowing to run full unit tests even when built without Iu support. */
-
-/*
- * (C) 2016,2017 by sysmocom s.f.m.c. GmbH <info@sysmocom.de>
- *
- * Author: Neels Hofmeyr <nhofmeyr@sysmocom.de>
- *
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Affero General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Affero General Public License for more details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include <stdint.h>
-#include <stdbool.h>
-
-#include <osmocom/core/linuxlist.h>
-
-struct msgb;
-struct gsm_auth_tuple;
-struct RANAP_Cause;
-struct osmo_auth_vector;
-
-struct ranap_ue_conn_ctx {
- struct llist_head list;
- uint32_t conn_id;
-};
-
-int ranap_iu_tx(struct msgb *msg, uint8_t sapi);
-int ranap_iu_tx_sec_mode_cmd(struct ranap_ue_conn_ctx *uectx, struct osmo_auth_vector *vec,
- int send_ck);
-int ranap_iu_page_cs(const char *imsi, const uint32_t *tmsi, uint16_t lac);
-int ranap_iu_page_ps(const char *imsi, const uint32_t *ptmsi, uint16_t lac, uint8_t rac);
-struct msgb *ranap_new_msg_rab_assign_voice(uint8_t rab_id, uint32_t rtp_ip,
- uint16_t rtp_port,
- bool use_x213_nsap);
-int ranap_iu_rab_act(struct ranap_ue_conn_ctx *ue_ctx, struct msgb *msg);
-int ranap_iu_tx_common_id(struct ranap_ue_conn_ctx *uectx, const char *imsi);
-int ranap_iu_tx_release(struct ranap_ue_conn_ctx *ctx, const struct RANAP_Cause *cause);
diff --git a/src/libmsc/gsm_04_14.c b/src/libmsc/gsm_04_14.c
deleted file mode 100644
index b529f4c..0000000
--- a/src/libmsc/gsm_04_14.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/* GSM MS Testing Layer 3 messages
- * 3GPP TS 44.014 / GSM TS 04.14 */
-
-/* (C) 2017 by Harald Welte <laforge@gnumonks.org>
- *
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU Affero General Public License as published by
- * the Free Software Foundation; either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU Affero General Public License for more details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include <stdlib.h>
-#include <string.h>
-#include <sys/types.h>
-
-#include "bscconfig.h"
-
-#include <openbsc/debug.h>
-#include <openbsc/gsm_data.h>
-#include <openbsc/gsm_subscriber.h>
-#include <openbsc/gsm_04_08.h>
-#include <openbsc/bsc_api.h>
-#include <openbsc/msc_ifaces.h>
-
-#include <osmocom/gsm/gsm48.h>
-#include <osmocom/gsm/gsm_utils.h>
-#include <osmocom/gsm/protocol/gsm_04_14.h>
-#include <osmocom/gsm/tlv.h>
-#include <osmocom/core/msgb.h>
-#include <osmocom/core/talloc.h>
-#include <osmocom/core/utils.h>
-
-static struct msgb *create_gsm0414_msg(uint8_t msg_type)
-{
- struct msgb *msg = gsm48_msgb_alloc_name("GSM 04.14");
- struct gsm48_hdr *gh;
-
- gh = (struct gsm48_hdr *) msgb_put(msg, sizeof(*gh) + 1);
- gh->proto_discr = GSM48_PDISC_TEST;
- gh->msg_type = msg_type;
- return msg;
-}
-
-static int gsm0414_conn_sendmsg(struct gsm_subscriber_connection *conn, struct msgb *msg)
-{
- return msc_tx_dtap(conn, msg);
-}
-
-static int gsm0414_tx_simple(struct gsm_subscriber_connection *conn, uint8_t msg_type)
-{
- struct msgb *msg = create_gsm0414_msg(msg_type);
-
- return gsm0414_conn_sendmsg(conn, msg);
-}
-
-
-/* Send a CLOSE_TCH_LOOOP_CMD according to Section 8.1 */
-int gsm0414_tx_close_tch_loop_cmd(struct gsm_subscriber_connection *conn,
- enum gsm414_tch_loop_mode loop_mode)
-{
- struct msgb *msg = create_gsm0414_msg(GSM414_MT_CLOSE_TCH_LOOP_CMD);
- uint8_t subch;
-
- subch = (loop_mode << 1);
- msgb_put_u8(msg, subch);
-
- msg->lchan = conn->lchan;
- return gsm0414_conn_sendmsg(conn, msg);
-}
-
-/* Send a OPEN_LOOP_CMD according to Section 8.3 */
-int gsm0414_tx_open_loop_cmd(struct gsm_subscriber_connection *conn)
-{
- return gsm0414_tx_simple(conn, GSM414_MT_OPEN_LOOP_CMD);
-}
-
-/* Send a ACT_EMMI_CMD according to Section 8.8 */
-int gsm0414_tx_act_emmi_cmd(struct gsm_subscriber_connection *conn)
-{
- return gsm0414_tx_simple(conn, GSM414_MT_ACT_EMMI_CMD);
-}
-
-/* Send a DEACT_EMMI_CMD according to Section 8.10 */
-int gsm0414_tx_deact_emmi_cmd(struct gsm_subscriber_connection *conn)
-{
- return gsm0414_tx_simple(conn, GSM414_MT_DEACT_EMMI_CMD);
-}
-
-/* Send a TEST_INTERFACE according to Section 8.11 */
-int gsm0414_tx_test_interface(struct gsm_subscriber_connection *conn,
- uint8_t tested_devs)
-{
- struct msgb *msg = create_gsm0414_msg(GSM414_MT_TEST_INTERFACE);
- msgb_put_u8(msg, tested_devs);
- return gsm0414_conn_sendmsg(conn, msg);
-}
-
-/* Send a RESET_MS_POSITION_STORED according to Section 8.11 */
-int gsm0414_tx_reset_ms_pos_store(struct gsm_subscriber_connection *conn,
- uint8_t technology)
-{
- struct msgb *msg = create_gsm0414_msg(GSM414_MT_RESET_MS_POS_STORED);
- msgb_put_u8(msg, technology);
- return gsm0414_conn_sendmsg(conn, msg);
-}
-
-
-
-/* Entry point for incoming GSM48_PDISC_TEST received from MS */
-int gsm0414_rcv_test(struct gsm_subscriber_connection *conn,
- struct msgb *msg)
-{
- struct gsm48_hdr *gh = msgb_l3(msg);
-
- if (msgb_l3len(msg) < sizeof(*gh))
- return -1;
-
- LOGP(DMM, LOGL_NOTICE, "%s: Received TEST class message '%s'\n", "FIXME",
- get_value_string(gsm414_msgt_names, gh->msg_type));
-
- return 0;
-}
diff --git a/tests/Makefile.am b/tests/Makefile.am
index 4a1f27a..f6cb938 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -25,7 +25,6 @@
$(srcdir)/package.m4 \
$(TESTSUITE) \
vty_test_runner.py \
- ctrl_test_runner.py \
$(NULL)
TESTSUITE = $(srcdir)/testsuite
@@ -39,7 +38,6 @@
osmotestvty.py -p $(abs_top_srcdir) -w $(abs_top_builddir) -v
osmotestconfig.py -p $(abs_top_srcdir) -w $(abs_top_builddir) -v
$(PYTHON) $(srcdir)/vty_test_runner.py -w $(abs_top_builddir) -v
- $(PYTHON) $(srcdir)/ctrl_test_runner.py -w $(abs_top_builddir) -v
else
python-tests: $(BUILT_SOURCES)
echo "Not running python-based tests (determined at configure-time)"
diff --git a/tests/ctrl_test_runner.py b/tests/ctrl_test_runner.py
deleted file mode 100644
index 2e59e13..0000000
--- a/tests/ctrl_test_runner.py
+++ /dev/null
@@ -1,575 +0,0 @@
-#!/usr/bin/env python
-
-# (C) 2013 by Jacob Erlbeck <jerlbeck@sysmocom.de>
-# (C) 2014 by Holger Hans Peter Freyther
-# based on vty_test_runner.py:
-# (C) 2013 by Katerina Barone-Adesi <kat.obsc@gmail.com>
-# (C) 2013 by Holger Hans Peter Freyther
-# based on bsc_control.py.
-
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-import os
-import time
-import unittest
-import socket
-import sys
-import struct
-
-import osmopy.obscvty as obscvty
-import osmopy.osmoutil as osmoutil
-
-# add $top_srcdir/contrib to find ipa.py
-sys.path.append(os.path.join(sys.path[0], '..', 'contrib'))
-
-from ipa import Ctrl, IPA
-
-# to be able to find $top_srcdir/doc/...
-confpath = os.path.join(sys.path[0], '..')
-verbose = False
-
-class TestCtrlBase(unittest.TestCase):
-
- def ctrl_command(self):
- raise Exception("Needs to be implemented by a subclass")
-
- def ctrl_app(self):
- raise Exception("Needs to be implemented by a subclass")
-
- def setUp(self):
- osmo_ctrl_cmd = self.ctrl_command()[:]
- config_index = osmo_ctrl_cmd.index('-c')
- if config_index:
- cfi = config_index + 1
- osmo_ctrl_cmd[cfi] = os.path.join(confpath, osmo_ctrl_cmd[cfi])
-
- try:
- self.proc = osmoutil.popen_devnull(osmo_ctrl_cmd)
- except OSError:
- print >> sys.stderr, "Current directory: %s" % os.getcwd()
- print >> sys.stderr, "Consider setting -b"
- time.sleep(2)
-
- appstring = self.ctrl_app()[2]
- appport = self.ctrl_app()[0]
- self.connect("127.0.0.1", appport)
- self.next_id = 1000
-
- def tearDown(self):
- self.disconnect()
- osmoutil.end_proc(self.proc)
-
- def disconnect(self):
- if not (self.sock is None):
- self.sock.close()
-
- def connect(self, host, port):
- if verbose:
- print "Connecting to host %s:%i" % (host, port)
-
- retries = 30
- while True:
- try:
- sck = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
- sck.setblocking(1)
- sck.connect((host, port))
- except IOError:
- retries -= 1
- if retries <= 0:
- raise
- time.sleep(.1)
- continue
- break
- self.sock = sck
- return sck
-
- def send(self, data):
- if verbose:
- print "Sending \"%s\"" %(data)
- data = Ctrl().add_header(data)
- return self.sock.send(data) == len(data)
-
- def send_set(self, var, value, id):
- setmsg = "SET %s %s %s" %(id, var, value)
- return self.send(setmsg)
-
- def send_get(self, var, id):
- getmsg = "GET %s %s" %(id, var)
- return self.send(getmsg)
-
- def do_set(self, var, value):
- id = self.next_id
- self.next_id += 1
- self.send_set(var, value, id)
- return self.recv_msgs()[id]
-
- def do_get(self, var):
- id = self.next_id
- self.next_id += 1
- self.send_get(var, id)
- return self.recv_msgs()[id]
-
- def recv_msgs(self):
- responses = {}
- data = self.sock.recv(4096)
- while (len(data)>0):
- (head, data) = IPA().split_combined(data)
- answer = Ctrl().rem_header(head)
- if verbose:
- print "Got message:", answer
- (mtype, id, msg) = answer.split(None, 2)
- id = int(id)
- rsp = {'mtype': mtype, 'id': id}
- if mtype == "ERROR":
- rsp['error'] = msg
- else:
- split = msg.split(None, 1)
- rsp['var'] = split[0]
- if len(split) > 1:
- rsp['value'] = split[1]
- else:
- rsp['value'] = None
- responses[id] = rsp
-
- if verbose:
- print "Decoded replies: ", responses
-
- return responses
-
-
-class TestCtrlBSC(TestCtrlBase):
-
- def tearDown(self):
- TestCtrlBase.tearDown(self)
- os.unlink("tmp_dummy_sock")
-
- def ctrl_command(self):
- return ["./src/osmo-bsc/osmo-bsc", "-r", "tmp_dummy_sock", "-c",
- "doc/examples/osmo-bsc/osmo-bsc.cfg"]
-
- def ctrl_app(self):
- return (4249, "./src/osmo-bsc/osmo-bsc", "OsmoBSC", "bsc")
-
- def testCtrlErrs(self):
- r = self.do_get('invalid')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Command not found')
-
- r = self.do_set('rf_locked', '999')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Value failed verification.')
-
- r = self.do_get('bts')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Error while parsing the index.')
-
- r = self.do_get('bts.999')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Error while resolving object')
-
- def testBtsLac(self):
- r = self.do_get('bts.0.location-area-code')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.location-area-code')
- self.assertEquals(r['value'], '1')
-
- r = self.do_set('bts.0.location-area-code', '23')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'bts.0.location-area-code')
- self.assertEquals(r['value'], '23')
-
- r = self.do_get('bts.0.location-area-code')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.location-area-code')
- self.assertEquals(r['value'], '23')
-
- r = self.do_set('bts.0.location-area-code', '-1')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Input not within the range')
-
- def testBtsCi(self):
- r = self.do_get('bts.0.cell-identity')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.cell-identity')
- self.assertEquals(r['value'], '0')
-
- r = self.do_set('bts.0.cell-identity', '23')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'bts.0.cell-identity')
- self.assertEquals(r['value'], '23')
-
- r = self.do_get('bts.0.cell-identity')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.cell-identity')
- self.assertEquals(r['value'], '23')
-
- r = self.do_set('bts.0.cell-identity', '-1')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Input not within the range')
-
- def testBtsGenerateSystemInformation(self):
- r = self.do_get('bts.0.send-new-system-informations')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Write Only attribute')
-
- # No RSL links so it will fail
- r = self.do_set('bts.0.send-new-system-informations', '1')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Failed to generate SI')
-
- def testBtsChannelLoad(self):
- r = self.do_set('bts.0.channel-load', '1')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Read Only attribute')
-
- # No RSL link so everything is 0
- r = self.do_get('bts.0.channel-load')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['value'],
- 'CCCH+SDCCH4,0,0 TCH/F,0,0 TCH/H,0,0 SDCCH8,0,0'
- + ' TCH/F_PDCH,0,0 CCCH+SDCCH4+CBCH,0,0'
- + ' SDCCH8+CBCH,0,0 TCH/F_TCH/H_PDCH,0,0')
-
- def testBtsOmlConnectionState(self):
- """Check OML state. It will not be connected"""
- r = self.do_set('bts.0.oml-connection-state', '1')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Read Only attribute')
-
- # No RSL link so everything is 0
- r = self.do_get('bts.0.oml-connection-state')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['value'], 'disconnected')
-
- def testTrxPowerRed(self):
- r = self.do_get('bts.0.trx.0.max-power-reduction')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.trx.0.max-power-reduction')
- self.assertEquals(r['value'], '20')
-
- r = self.do_set('bts.0.trx.0.max-power-reduction', '22')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'bts.0.trx.0.max-power-reduction')
- self.assertEquals(r['value'], '22')
-
- r = self.do_get('bts.0.trx.0.max-power-reduction')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.trx.0.max-power-reduction')
- self.assertEquals(r['value'], '22')
-
- r = self.do_set('bts.0.trx.0.max-power-reduction', '1')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Value must be even')
-
- def testTrxArfcn(self):
- r = self.do_get('bts.0.trx.0.arfcn')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.trx.0.arfcn')
- self.assertEquals(r['value'], '871')
-
- r = self.do_set('bts.0.trx.0.arfcn', '873')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'bts.0.trx.0.arfcn')
- self.assertEquals(r['value'], '873')
-
- r = self.do_get('bts.0.trx.0.arfcn')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.trx.0.arfcn')
- self.assertEquals(r['value'], '873')
-
- r = self.do_set('bts.0.trx.0.arfcn', '2000')
- self.assertEquals(r['mtype'], 'ERROR')
- self.assertEquals(r['error'], 'Input not within the range')
-
- def testRfLock(self):
- r = self.do_get('bts.0.rf_state')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.rf_state')
- self.assertEquals(r['value'], 'inoperational,unlocked,on')
-
- r = self.do_set('rf_locked', '1')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'rf_locked')
- self.assertEquals(r['value'], '1')
-
- time.sleep(1.5)
-
- r = self.do_get('bts.0.rf_state')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.rf_state')
- self.assertEquals(r['value'], 'inoperational,locked,off')
-
- r = self.do_get('rf_locked')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'rf_locked')
- self.assertEquals(r['value'], 'state=off,policy=off')
-
- r = self.do_set('rf_locked', '0')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'rf_locked')
- self.assertEquals(r['value'], '0')
-
- time.sleep(1.5)
-
- r = self.do_get('bts.0.rf_state')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'bts.0.rf_state')
- self.assertEquals(r['value'], 'inoperational,unlocked,on')
-
- r = self.do_get('rf_locked')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'rf_locked')
- self.assertEquals(r['value'], 'state=off,policy=on')
-
- def testTimezone(self):
- r = self.do_get('timezone')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'timezone')
- self.assertEquals(r['value'], 'off')
-
- r = self.do_set('timezone', '-2,15,2')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'timezone')
- self.assertEquals(r['value'], '-2,15,2')
-
- r = self.do_get('timezone')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'timezone')
- self.assertEquals(r['value'], '-2,15,2')
-
- # Test invalid input
- r = self.do_set('timezone', '-2,15,2,5,6,7')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'timezone')
- self.assertEquals(r['value'], '-2,15,2')
-
- r = self.do_set('timezone', '-2,15')
- self.assertEquals(r['mtype'], 'ERROR')
- r = self.do_set('timezone', '-2')
- self.assertEquals(r['mtype'], 'ERROR')
- r = self.do_set('timezone', '1')
-
- r = self.do_set('timezone', 'off')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'timezone')
- self.assertEquals(r['value'], 'off')
-
- r = self.do_get('timezone')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'timezone')
- self.assertEquals(r['value'], 'off')
-
- def testMcc(self):
- r = self.do_set('mcc', '23')
- r = self.do_get('mcc')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'mcc')
- self.assertEquals(r['value'], '23')
-
- r = self.do_set('mcc', '023')
- r = self.do_get('mcc')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'mcc')
- self.assertEquals(r['value'], '23')
-
- def testMnc(self):
- r = self.do_set('mnc', '9')
- r = self.do_get('mnc')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'mnc')
- self.assertEquals(r['value'], '9')
-
- r = self.do_set('mnc', '09')
- r = self.do_get('mnc')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'mnc')
- self.assertEquals(r['value'], '9')
-
-
- def testMccMncApply(self):
- # Test some invalid input
- r = self.do_set('mcc-mnc-apply', 'WRONG')
- self.assertEquals(r['mtype'], 'ERROR')
-
- r = self.do_set('mcc-mnc-apply', '1,')
- self.assertEquals(r['mtype'], 'ERROR')
-
- r = self.do_set('mcc-mnc-apply', '200,3')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'mcc-mnc-apply')
- self.assertEquals(r['value'], 'Tried to drop the BTS')
-
- # Set it again
- r = self.do_set('mcc-mnc-apply', '200,3')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'mcc-mnc-apply')
- self.assertEquals(r['value'], 'Nothing changed')
-
- # Change it
- r = self.do_set('mcc-mnc-apply', '200,4')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'mcc-mnc-apply')
- self.assertEquals(r['value'], 'Tried to drop the BTS')
-
- # Change it
- r = self.do_set('mcc-mnc-apply', '201,4')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'mcc-mnc-apply')
- self.assertEquals(r['value'], 'Tried to drop the BTS')
-
- # Verify
- r = self.do_get('mnc')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'mnc')
- self.assertEquals(r['value'], '4')
-
- r = self.do_get('mcc')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'mcc')
- self.assertEquals(r['value'], '201')
-
- # Change it
- r = self.do_set('mcc-mnc-apply', '202,03')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'mcc-mnc-apply')
- self.assertEquals(r['value'], 'Tried to drop the BTS')
-
- r = self.do_get('mnc')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'mnc')
- self.assertEquals(r['value'], '3')
-
- r = self.do_get('mcc')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'mcc')
- self.assertEquals(r['value'], '202')
-
-class TestCtrlNAT(TestCtrlBase):
-
- def ctrl_command(self):
- return ["./src/osmo-bsc_nat/osmo-bsc_nat", "-c",
- "doc/examples/osmo-bsc_nat/osmo-bsc_nat.cfg"]
-
- def ctrl_app(self):
- return (4250, "./src/osmo-bsc_nat/osmo-bsc_nat", "OsmoNAT", "nat")
-
- def testAccessList(self):
- r = self.do_get('net.0.bsc_cfg.0.access-list-name')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'net')
- self.assertEquals(r['value'], None)
-
- r = self.do_set('net.0.bsc_cfg.0.access-list-name', 'bla')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'net')
- self.assertEquals(r['value'], 'bla')
-
- r = self.do_get('net.0.bsc_cfg.0.access-list-name')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'net')
- self.assertEquals(r['value'], 'bla')
-
- r = self.do_set('net.0.bsc_cfg.0.no-access-list-name', '1')
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'net')
- self.assertEquals(r['value'], None)
-
- r = self.do_get('net.0.bsc_cfg.0.access-list-name')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'net')
- self.assertEquals(r['value'], None)
-
- def testAccessListManagement(self):
- r = self.do_set("net.0.add.allow.access-list.404", "abc")
- self.assertEquals(r['mtype'], 'ERROR')
-
- r = self.do_set("net.0.add.allow.access-list.bla", "^234$")
- self.assertEquals(r['mtype'], 'SET_REPLY')
- self.assertEquals(r['var'], 'net.0.add.allow.access-list.bla')
- self.assertEquals(r['value'], 'IMSI allow added to access list')
-
- # TODO.. find a way to actually see if this rule has been
- # added. e.g. by implementing a get for the list.
-
-class TestCtrlSGSN(TestCtrlBase):
- def ctrl_command(self):
- return ["./src/gprs/osmo-sgsn", "-c",
- "doc/examples/osmo-sgsn/osmo-sgsn.cfg"]
-
- def ctrl_app(self):
- return (4251, "./src/gprs/osmo-sgsn", "OsmoSGSN", "sgsn")
-
- def testListSubscribers(self):
- # TODO. Add command to mark a subscriber as active
- r = self.do_get('subscriber-list-active-v1')
- self.assertEquals(r['mtype'], 'GET_REPLY')
- self.assertEquals(r['var'], 'subscriber-list-active-v1')
- self.assertEquals(r['value'], None)
-
-def add_bsc_test(suite, workdir):
- if not os.path.isfile(os.path.join(workdir, "src/osmo-bsc/osmo-bsc")):
- print("Skipping the BSC test")
- return
- test = unittest.TestLoader().loadTestsFromTestCase(TestCtrlBSC)
- suite.addTest(test)
-
-def add_nat_test(suite, workdir):
- if not os.path.isfile(os.path.join(workdir, "src/osmo-bsc_nat/osmo-bsc_nat")):
- print("Skipping the NAT test")
- return
- test = unittest.TestLoader().loadTestsFromTestCase(TestCtrlNAT)
- suite.addTest(test)
-
-def add_sgsn_test(suite, workdir):
- if not os.path.isfile(os.path.join(workdir, "src/gprs/osmo-sgsn")):
- print("Skipping the SGSN test")
- return
- test = unittest.TestLoader().loadTestsFromTestCase(TestCtrlSGSN)
- suite.addTest(test)
-
-if __name__ == '__main__':
- import argparse
- import sys
-
- workdir = '.'
-
- parser = argparse.ArgumentParser()
- parser.add_argument("-v", "--verbose", dest="verbose",
- action="store_true", help="verbose mode")
- parser.add_argument("-p", "--pythonconfpath", dest="p",
- help="searchpath for config")
- parser.add_argument("-w", "--workdir", dest="w",
- help="Working directory")
- args = parser.parse_args()
-
- verbose_level = 1
- if args.verbose:
- verbose_level = 2
- verbose = True
-
- if args.w:
- workdir = args.w
-
- if args.p:
- confpath = args.p
-
- print "confpath %s, workdir %s" % (confpath, workdir)
- os.chdir(workdir)
- print "Running tests for specific control commands"
- suite = unittest.TestSuite()
- add_bsc_test(suite, workdir)
- add_nat_test(suite, workdir)
- add_sgsn_test(suite, workdir)
- res = unittest.TextTestRunner(verbosity=verbose_level).run(suite)
- sys.exit(len(res.errors) + len(res.failures))
diff --git a/tools/hlrstat.pl b/tools/hlrstat.pl
deleted file mode 100755
index 668fc9a..0000000
--- a/tools/hlrstat.pl
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/usr/bin/perl
-
-use strict;
-use DBI;
-my $dbh = DBI->connect("dbi:SQLite:dbname=hlr.sqlite3","","");
-
-
-my %mcc_names;
-my %mcc_mnc_names;
-
-sub get_mcc_mnc_name($)
-{
- my $mcc_mnc = shift;
- my $ret = $mcc_mnc;
-
- if ($mcc_mnc_names{$mcc_mnc} ne '') {
- $ret = $mcc_mnc_names{$mcc_mnc};
- }
-
- return $ret;
-}
-
-sub read_networks($)
-{
- my $filename = shift;
- my $cur_name;
-
- open(INFILE, $filename);
- while (my $l = <INFILE>) {
- chomp($l);
- if ($l =~ /^#/) {
- next;
- }
- if ($l =~ /^\t/) {
- my ($mcc, $mnc, $brand, $r) = split(' ', $l, 4);
- #printf("%s|%s|%s\n", $mcc, $mnc, $brand);
- $mcc_mnc_names{"$mcc-$mnc"} = $brand;
- $mcc_names{$mcc} = $cur_name;
- } elsif ($l =~ /^(\w\w)\t(.*)/) {
- #printf("%s|%s\n", $1, $2);
- $cur_name = $2;
- }
- }
- close(INFILE);
-}
-
-read_networks("networks.tab");
-
-my %oper_count;
-my %country_count;
-
-#my $sth = $dbh->prepare("SELECT imsi FROM subscriber where authorized=1");
-my $sth = $dbh->prepare("SELECT imsi FROM subscriber");
-
-$sth->execute();
-
-while (my $href = $sth->fetchrow_hashref) {
- my ($mcc, $mnc) = $$href{imsi} =~ /(\d{3})(\d{2}).*/;
- #printf("%s %s-%s \n", $$href{imsi}, $mcc, $mnc);
- $oper_count{"$mcc-$mnc"}++;
- $country_count{$mcc}++;
-}
-
-
-foreach my $c (sort{$country_count{$b} <=> $country_count{$a}} keys %country_count) {
- printf("%s: %d\n", $mcc_names{$c}, $country_count{$c});
-
- foreach my $k (sort{$oper_count{$b} <=> $oper_count{$a}} keys %oper_count) {
- if ($k =~ /^$c-/) {
- printf("\t%s: %d\n", get_mcc_mnc_name($k), $oper_count{$k});
- }
- }
-}