* add trau_mux implementation to relay from one incoming TRAU
channel to another one (simple voice call switching)
* add a way more generic E1 input layer, abstracting out the misdn
low-level interface. This also adds infrastructure for multiple TRX
in one BTS, as well as multiple BTS on one E1 link
* add a E1 subchannel multiplexer for sending multiple 16kbit sub-channels
one one 64kBps E1 channel
* add TRAU IDLE frame generation
* terminate bsc_hack in case there is a E1 / mISDN init error
* introduce 'e1_config.c' file with static configuration of our
E1 setup (which TRX/BTS is configured for which TEI/SAPI/E1). This should
later become a config file rather than a compiled C file.
WARNING: all this compiles but is not tested yet. Expect fix-up committs over
the next hours or so
diff --git a/src/Makefile.am b/src/Makefile.am
index 53b2903..ae5715c 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -3,10 +3,11 @@
sbin_PROGRAMS = bsc_hack bs11_config
-bsc_hack_SOURCES = bsc_hack.c misdn.c abis_rsl.c abis_nm.c gsm_04_08.c gsm_data.c \
+bsc_hack_SOURCES = bsc_hack.c abis_rsl.c abis_nm.c gsm_04_08.c gsm_data.c \
gsm_subscriber.c msgb.c select.c chan_alloc.c timer.c debug.c db.c \
gsm_04_11.c telnet_interface.c telnet_parser.l subchan_demux.c \
- trau_frame.c paging.c
+ trau_frame.c trau_mux.c paging.c e1_config.c e1_input.c \
+ input/misdn.c
bsc_hack_LDADD = -ldl -ldbi
bs11_config_SOURCES = bs11_config.c abis_nm.c gsm_data.c msgb.c debug.c select.c timer.c rs232.c