diff --git a/Makefile.am b/Makefile.am
index 9a92f2f..e6ba26d 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -1,9 +1,9 @@
 AUTOMAKE_OPTIONS = foreign dist-bzip2
 
 SUBDIRS = \
-	doc \
 	src \
 	include \
+	doc \
 	sql \
 	contrib \
 	tests \
diff --git a/doc/manuals/Makefile.am b/doc/manuals/Makefile.am
index 8a47f8a..e3a76ad 100644
--- a/doc/manuals/Makefile.am
+++ b/doc/manuals/Makefile.am
@@ -14,6 +14,12 @@
   include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.asciidoc.inc
 
   VTY_REFERENCE = osmohlr-vty-reference.xml
+
+  BUILT_REFERENCE_XML = $(builddir)/vty/hlr_vty_reference.xml
+  $(builddir)/vty/hlr_vty_reference.xml: $(top_builddir)/src/osmo-hlr
+	mkdir -p $(builddir)/vty
+	$(top_builddir)/src/osmo-hlr --vty-ref-xml > $@
+
   include $(OSMO_GSM_MANUALS_DIR)/build/Makefile.vty-reference.inc
 
   OSMO_REPOSITORY = osmo-hlr
diff --git a/doc/manuals/vty/hlr_vty_reference.xml b/doc/manuals/vty/hlr_vty_reference.xml
deleted file mode 100644
index 7a9eb03..0000000
--- a/doc/manuals/vty/hlr_vty_reference.xml
+++ /dev/null
@@ -1,1777 +0,0 @@
-<vtydoc xmlns='urn:osmocom:xml:libosmocore:vty:doc:1.0'>
-  <node id='_common_cmds_'>
-    <name>Common Commands</name>
-    <description>These commands are available on all VTY nodes. They are listed here only once, to unclutter the VTY reference.</description>
-    <command id='help'>
-      <params>
-        <param name='help' doc='Description of the interactive help system' />
-      </params>
-    </command>
-    <command id='list'>
-      <params>
-        <param name='list' doc='Print command list' />
-      </params>
-    </command>
-    <command id='write terminal'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='terminal' doc='Write to terminal' />
-      </params>
-    </command>
-    <command id='write file [PATH]'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='file' doc='Write to configuration file' />
-        <param name='[PATH]' doc='Set file path to store the config, or replace if already exists' />
-      </params>
-    </command>
-    <command id='write memory'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-        <param name='memory' doc='Write configuration to the file (same as write file)' />
-      </params>
-    </command>
-    <command id='write'>
-      <params>
-        <param name='write' doc='Write running configuration to memory, network, or terminal' />
-      </params>
-    </command>
-    <command id='show running-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='running-config' doc='running configuration' />
-      </params>
-    </command>
-    <command id='exit'>
-      <params>
-        <param name='exit' doc='Exit current mode and down to previous mode' />
-      </params>
-    </command>
-    <command id='end'>
-      <params>
-        <param name='end' doc='End current mode and change to enable mode.' />
-      </params>
-    </command>
-  </node>
-  <node id='view'>
-    <name>view</name>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='enable'>
-      <params>
-        <param name='enable' doc='Turn on privileged mode command' />
-      </params>
-    </command>
-    <command id='terminal length &lt;0-512&gt;'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don&apos;t use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (main|db|auc|ss|mslookup|lu|dgsm|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='main' doc='Main Program' />
-        <param name='db' doc='Database Layer' />
-        <param name='auc' doc='Authentication Center' />
-        <param name='ss' doc='Supplementary Services' />
-        <param name='mslookup' doc='Mobile Subscriber Lookup' />
-        <param name='lu' doc='Location Updating' />
-        <param name='dgsm' doc='Distributed GSM: MS lookup and proxy' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
-      </params>
-    </command>
-    <command id='logp (main|db|auc|ss|mslookup|lu|dgsm|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
-      <params>
-        <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
-        <param name='main' doc='Main Program' />
-        <param name='db' doc='Database Layer' />
-        <param name='auc' doc='Authentication Center' />
-        <param name='ss' doc='Supplementary Services' />
-        <param name='mslookup' doc='Mobile Subscriber Lookup' />
-        <param name='lu' doc='Location Updating' />
-        <param name='dgsm' doc='Distributed GSM: MS lookup and proxy' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-        <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='tree' doc='Display only a specific memory chunk' />
-        <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='filter' doc='Filter chunks using regular expression' />
-        <param name='REGEXP' doc='Regular expression' />
-      </params>
-    </command>
-    <command id='show stats'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-      </params>
-    </command>
-    <command id='show stats level (global|peer|subscriber)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Show global groups only' />
-        <param name='peer' doc='Show global and network peer related groups' />
-        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='show asciidoc counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='asciidoc' doc='Asciidoc generation' />
-        <param name='counters' doc='Generate table of all registered counters' />
-      </params>
-    </command>
-    <command id='show rate-counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='rate-counters' doc='Show all rate counters' />
-      </params>
-    </command>
-    <command id='show gsup-connections'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gsup-connections' doc='GSUP Connections from VLRs, SGSNs, EUSEs' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT show'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='show' doc='Show subscriber information' />
-      </params>
-    </command>
-    <command id='show subscriber (imsi|msisdn|id|imei) IDENT'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-      </params>
-    </command>
-    <command id='show mslookup services'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='mslookup' doc='Distributed GSM / mslookup related information' />
-        <param name='services' doc='List configured service addresses as sent to remote mslookup requests' />
-      </params>
-    </command>
-    <command id='show cpu-sched threads'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cpu-sched' doc='Show Sched section information' />
-        <param name='threads' doc='Show information about running threads)' />
-      </params>
-    </command>
-  </node>
-  <node id='enable'>
-    <name>enable</name>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Turn off privileged mode command' />
-      </params>
-    </command>
-    <command id='configure terminal'>
-      <params>
-        <param name='configure' doc='Configuration from vty interface' />
-        <param name='terminal' doc='Configuration terminal' />
-      </params>
-    </command>
-    <command id='copy running-config startup-config'>
-      <params>
-        <param name='copy' doc='Copy configuration' />
-        <param name='running-config' doc='Copy running config to... ' />
-        <param name='startup-config' doc='Copy running config to startup config (same as write file)' />
-      </params>
-    </command>
-    <command id='show startup-config'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='startup-config' doc='Contentes of startup configuration' />
-      </params>
-    </command>
-    <command id='show version'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='version' doc='Displays program version' />
-      </params>
-    </command>
-    <command id='show online-help'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='online-help' doc='Online help' />
-      </params>
-    </command>
-    <command id='terminal length &lt;0-512&gt;'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='length' doc='Set number of lines on a screen' />
-        <param name='&lt;0-512&gt;' doc='Number of lines on screen (0 for no pausing)' />
-      </params>
-    </command>
-    <command id='terminal no length'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='length' doc='Set number of lines on a screen' />
-      </params>
-    </command>
-    <command id='who'>
-      <params>
-        <param name='who' doc='Display who is on vty' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='terminal monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='terminal no monitor'>
-      <params>
-        <param name='terminal' doc='Set terminal line parameters' />
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='monitor' doc='Copy debug output to the current terminal line' />
-      </params>
-    </command>
-    <command id='logging enable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='enable' doc='Enables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging disable'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='disable' doc='Disables logging to this vty' />
-      </params>
-    </command>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don&apos;t use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging set-log-mask MASK'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='set-log-mask' doc='Set the logmask of this logging target' />
-        <param name='MASK' doc='List of logging categories to log, e.g. &apos;abc:mno:xyz&apos;. Available log categories depend on the specific application, refer to the &apos;logging level&apos; command. Optionally add individual log levels like &apos;abc,1:mno,3:xyz,5&apos;, where the level numbers are LOGL_DEBUG=1 LOGL_INFO=3 LOGL_NOTICE=5 LOGL_ERROR=7 LOGL_FATAL=8' />
-      </params>
-    </command>
-    <command id='logging level (main|db|auc|ss|mslookup|lu|dgsm|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='main' doc='Main Program' />
-        <param name='db' doc='Database Layer' />
-        <param name='auc' doc='Authentication Center' />
-        <param name='ss' doc='Supplementary Services' />
-        <param name='mslookup' doc='Mobile Subscriber Lookup' />
-        <param name='lu' doc='Location Updating' />
-        <param name='dgsm' doc='Distributed GSM: MS lookup and proxy' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
-      </params>
-    </command>
-    <command id='logp (main|db|auc|ss|mslookup|lu|dgsm|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal) .LOGMESSAGE'>
-      <params>
-        <param name='logp' doc='Print a message on all log outputs; useful for placing markers in test logs' />
-        <param name='main' doc='Main Program' />
-        <param name='db' doc='Database Layer' />
-        <param name='auc' doc='Authentication Center' />
-        <param name='ss' doc='Supplementary Services' />
-        <param name='mslookup' doc='Mobile Subscriber Lookup' />
-        <param name='lu' doc='Location Updating' />
-        <param name='dgsm' doc='Distributed GSM: MS lookup and proxy' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-        <param name='.LOGMESSAGE' doc='Arbitrary message to log on given category and log level' />
-      </params>
-    </command>
-    <command id='show logging vty'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='logging' doc='Show current logging configuration' />
-        <param name='vty' doc='Show current logging configuration for this vty' />
-      </params>
-    </command>
-    <command id='show alarms'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='alarms' doc='Show current logging configuration' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) tree ADDRESS'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='tree' doc='Display only a specific memory chunk' />
-        <param name='ADDRESS' doc='Chunk address (e.g. 0xdeadbeef)' />
-      </params>
-    </command>
-    <command id='show talloc-context (application|all) (full|brief|DEPTH) filter REGEXP'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='talloc-context' doc='Show talloc memory hierarchy' />
-        <param name='application' doc='Application&apos;s context' />
-        <param name='all' doc='All contexts, if NULL-context tracking is enabled' />
-        <param name='full' doc='Display a full talloc memory hierarchy' />
-        <param name='brief' doc='Display a brief talloc memory hierarchy' />
-        <param name='DEPTH' doc='Specify required maximal depth value' />
-        <param name='filter' doc='Filter chunks using regular expression' />
-        <param name='REGEXP' doc='Regular expression' />
-      </params>
-    </command>
-    <command id='show stats'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-      </params>
-    </command>
-    <command id='show stats level (global|peer|subscriber)'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='stats' doc='Show statistical values' />
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Show global groups only' />
-        <param name='peer' doc='Show global and network peer related groups' />
-        <param name='subscriber' doc='Show global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='show asciidoc counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='asciidoc' doc='Asciidoc generation' />
-        <param name='counters' doc='Generate table of all registered counters' />
-      </params>
-    </command>
-    <command id='show rate-counters'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='rate-counters' doc='Show all rate counters' />
-      </params>
-    </command>
-    <command id='stats report'>
-      <params>
-        <param name='stats' doc='Stats related commands' />
-        <param name='report' doc='Manurally trigger reporting of stats' />
-      </params>
-    </command>
-    <command id='stats reset'>
-      <params>
-        <param name='stats' doc='Stats related commands' />
-        <param name='reset' doc='Reset all stats' />
-      </params>
-    </command>
-    <command id='show gsup-connections'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='gsup-connections' doc='GSUP Connections from VLRs, SGSNs, EUSEs' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT show'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='show' doc='Show subscriber information' />
-      </params>
-    </command>
-    <command id='show subscriber (imsi|msisdn|id|imei) IDENT'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-      </params>
-    </command>
-    <command id='subscriber imsi IDENT create'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID of the subscriber' />
-        <param name='create' doc='Create subscriber by IMSI' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT delete'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='delete' doc='Delete subscriber from database' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT update msisdn (none|MSISDN)'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='update' doc='Set or update subscriber data' />
-        <param name='msisdn' doc='Set MSISDN (phone number) of the subscriber' />
-        <param name='none' doc='Remove MSISDN (phone number)' />
-        <param name='MSISDN' doc='New MSISDN (phone number)' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT update aud2g none'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='update' doc='Set or update subscriber data' />
-        <param name='aud2g' doc='Set 2G authentication data' />
-        <param name='none' doc='Delete 2G authentication data' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT update aud2g (comp128v1|comp128v2|comp128v3|xor) ki KI'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='update' doc='Set or update subscriber data' />
-        <param name='aud2g' doc='Set 2G authentication data' />
-        <param name='comp128v1' doc='Use COMP128v1 algorithm' />
-        <param name='comp128v2' doc='Use COMP128v2 algorithm' />
-        <param name='comp128v3' doc='Use COMP128v3 algorithm' />
-        <param name='xor' doc='Use XOR algorithm' />
-        <param name='ki' doc='Set Ki Encryption Key' />
-        <param name='KI' doc='Ki as 32 hexadecimal characters' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT update aud3g none'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='update' doc='Set or update subscriber data' />
-        <param name='aud3g' doc='Set UMTS authentication data (3G, and 2G with UMTS AKA)' />
-        <param name='none' doc='Delete 3G authentication data' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT update aud3g milenage k K (op|opc) OP_C [ind-bitlen] [&lt;0-28&gt;]'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='update' doc='Set or update subscriber data' />
-        <param name='aud3g' doc='Set UMTS authentication data (3G, and 2G with UMTS AKA)' />
-        <param name='milenage' doc='Use Milenage algorithm' />
-        <param name='k' doc='Set Encryption Key K' />
-        <param name='K' doc='K as 32 hexadecimal characters' />
-        <param name='op' doc='Set OP key' />
-        <param name='opc' doc='Set OPC key' />
-        <param name='OP_C' doc='OP or OPC as 32 hexadecimal characters' />
-        <param name='[ind-bitlen]' doc='Set IND bit length' />
-        <param name='[&lt;0-28&gt;]' doc='IND bit length value (default: 5)' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT update imei (none|IMEI)'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='update' doc='Set or update subscriber data' />
-        <param name='imei' doc='Set IMEI of the subscriber (normally populated from MSC, no need to set this manually)' />
-        <param name='none' doc='Forget IMEI' />
-        <param name='IMEI' doc='Set IMEI (use for debug only!)' />
-      </params>
-    </command>
-    <command id='subscriber (imsi|msisdn|id|imei) IDENT update network-access-mode (none|cs|ps|cs+ps)'>
-      <params>
-        <param name='subscriber' doc='Subscriber management commands' />
-        <param name='imsi' doc='Identify subscriber by IMSI' />
-        <param name='msisdn' doc='Identify subscriber by MSISDN (phone number)' />
-        <param name='id' doc='Identify subscriber by database ID' />
-        <param name='imei' doc='Identify subscriber by IMEI' />
-        <param name='IDENT' doc='IMSI/MSISDN/ID/IMEI of the subscriber' />
-        <param name='update' doc='Set or update subscriber data' />
-        <param name='network-access-mode' doc='Set Network Access Mode (NAM) of the subscriber' />
-        <param name='none' doc='Do not allow access to circuit switched or packet switched services' />
-        <param name='cs' doc='Allow access to circuit switched services only' />
-        <param name='ps' doc='Allow access to packet switched services only' />
-        <param name='cs+ps' doc='Allow access to both circuit and packet switched services' />
-      </params>
-    </command>
-    <command id='show mslookup services'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='mslookup' doc='Distributed GSM / mslookup related information' />
-        <param name='services' doc='List configured service addresses as sent to remote mslookup requests' />
-      </params>
-    </command>
-    <command id='show cpu-sched threads'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='cpu-sched' doc='Show Sched section information' />
-        <param name='threads' doc='Show information about running threads)' />
-      </params>
-    </command>
-  </node>
-  <node id='config'>
-    <name>config</name>
-    <command id='hostname WORD'>
-      <params>
-        <param name='hostname' doc='Set system&apos;s network name' />
-        <param name='WORD' doc='This system&apos;s network name' />
-      </params>
-    </command>
-    <command id='no hostname [HOSTNAME]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='hostname' doc='Reset system&apos;s network name' />
-        <param name='[HOSTNAME]' doc='Host name of this router' />
-      </params>
-    </command>
-    <command id='password (8|) WORD'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN line password string' />
-      </params>
-    </command>
-    <command id='password LINE'>
-      <params>
-        <param name='password' doc='Assign the terminal connection password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) line password' />
-      </params>
-    </command>
-    <command id='enable password (8|) WORD'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='8' doc='Specifies a HIDDEN password will follow' />
-        <param name='' doc='dummy string ' />
-        <param name='WORD' doc='The HIDDEN &apos;enable&apos; password string' />
-      </params>
-    </command>
-    <command id='enable password LINE'>
-      <params>
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-        <param name='LINE' doc='The UNENCRYPTED (cleartext) &apos;enable&apos; password' />
-      </params>
-    </command>
-    <command id='no enable password'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='enable' doc='Modify enable password parameters' />
-        <param name='password' doc='Assign the privileged level password' />
-      </params>
-    </command>
-    <command id='banner motd default'>
-      <params>
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-        <param name='default' doc='Default string' />
-      </params>
-    </command>
-    <command id='banner motd file [FILE]'>
-      <params>
-        <param name='banner' doc='Set banner' />
-        <param name='motd' doc='Banner for motd' />
-        <param name='file' doc='Banner from a file' />
-        <param name='[FILE]' doc='Filename' />
-      </params>
-    </command>
-    <command id='no banner motd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='banner' doc='Set banner string' />
-        <param name='motd' doc='Strings for motd' />
-      </params>
-    </command>
-    <command id='service terminal-length &lt;0-512&gt;'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='&lt;0-512&gt;' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='no service terminal-length [&lt;0-512&gt;]'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='terminal-length' doc='System wide terminal length configuration' />
-        <param name='[&lt;0-512&gt;]' doc='Number of lines of VTY (0 means no line control)' />
-      </params>
-    </command>
-    <command id='line vty'>
-      <params>
-        <param name='line' doc='Configure a terminal line' />
-        <param name='vty' doc='Virtual terminal' />
-      </params>
-    </command>
-    <command id='service advanced-vty'>
-      <params>
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='no service advanced-vty'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Set up miscellaneous service' />
-        <param name='advanced-vty' doc='Enable advanced mode vty interface' />
-      </params>
-    </command>
-    <command id='show history'>
-      <params>
-        <param name='show' doc='Show running system information' />
-        <param name='history' doc='Display the session command history' />
-      </params>
-    </command>
-    <command id='ctrl'>
-      <params>
-        <param name='ctrl' doc='Configure the Control Interface' />
-      </params>
-    </command>
-    <command id='log stderr'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='no log stderr'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='stderr' doc='Logging via STDERR of the process' />
-      </params>
-    </command>
-    <command id='log file .FILENAME'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='no log file .FILENAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='file' doc='Logging to text file' />
-        <param name='.FILENAME' doc='Filename' />
-      </params>
-    </command>
-    <command id='log alarms &lt;2-32700&gt;'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-        <param name='&lt;2-32700&gt;' doc='Maximum number of messages to log' />
-      </params>
-    </command>
-    <command id='no log alarms'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='alarms' doc='Logging alarms to osmo_strrb' />
-      </params>
-    </command>
-    <command id='log syslog (authpriv|cron|daemon|ftp|lpr|mail|news|user|uucp)'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='authpriv' doc='Security/authorization messages facility' />
-        <param name='cron' doc='Clock daemon (cron/at) facility' />
-        <param name='daemon' doc='General system daemon facility' />
-        <param name='ftp' doc='Ftp daemon facility' />
-        <param name='lpr' doc='Line printer facility' />
-        <param name='mail' doc='Mail facility' />
-        <param name='news' doc='News facility' />
-        <param name='user' doc='Generic facility' />
-        <param name='uucp' doc='UUCP facility' />
-      </params>
-    </command>
-    <command id='log syslog local &lt;0-7&gt;'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-        <param name='local' doc='Syslog LOCAL facility' />
-        <param name='&lt;0-7&gt;' doc='Local facility number' />
-      </params>
-    </command>
-    <command id='no log syslog'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='syslog' doc='Logging via syslog' />
-      </params>
-    </command>
-    <command id='log gsmtap [HOSTNAME]'>
-      <params>
-        <param name='log' doc='Configure logging sub-system' />
-        <param name='gsmtap' doc='Logging via GSMTAP' />
-        <param name='[HOSTNAME]' doc='Host name to send the GSMTAP logging to (UDP port 4729)' />
-      </params>
-    </command>
-    <command id='stats reporter statsd'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='statsd' doc='Report to a STATSD server' />
-      </params>
-    </command>
-    <command id='no stats reporter statsd'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='statsd' doc='Report to a STATSD server' />
-      </params>
-    </command>
-    <command id='stats reporter log'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='log' doc='Report to the logger' />
-      </params>
-    </command>
-    <command id='no stats reporter log'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='reporter' doc='Configure a stats reporter' />
-        <param name='log' doc='Report to the logger' />
-      </params>
-    </command>
-    <command id='stats interval &lt;0-65535&gt;'>
-      <params>
-        <param name='stats' doc='Configure stats sub-system' />
-        <param name='interval' doc='Set the reporting interval' />
-        <param name='&lt;0-65535&gt;' doc='Interval in seconds (0 disables the reporting interval)' />
-      </params>
-    </command>
-    <command id='hlr'>
-      <params>
-        <param name='hlr' doc='Configure the HLR' />
-      </params>
-    </command>
-    <command id='mslookup'>
-      <params>
-        <param name='mslookup' doc='Configure Distributed GSM mslookup' />
-      </params>
-    </command>
-    <command id='cpu-sched'>
-      <params>
-        <param name='cpu-sched' doc='Configure CPU Scheduler related settings' />
-      </params>
-    </command>
-  </node>
-  <node id='config-log'>
-    <name>config-log</name>
-    <command id='logging filter all (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='filter' doc='Filter log messages' />
-        <param name='all' doc='Do you want to log all messages?' />
-        <param name='0' doc='Only print messages matched by other filters' />
-        <param name='1' doc='Bypass filter and print all messages' />
-      </params>
-    </command>
-    <command id='logging color (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='color' doc='Configure color-printing for log messages' />
-        <param name='0' doc='Don&apos;t use color for printing messages' />
-        <param name='1' doc='Use color for printing messages' />
-      </params>
-    </command>
-    <command id='logging timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp' />
-      </params>
-    </command>
-    <command id='logging print extended-timestamp (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='extended-timestamp' doc='Configure log message timestamping' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with current timestamp with YYYYMMDDhhmmssnnn' />
-      </params>
-    </command>
-    <command id='logging print category (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem name' />
-      </params>
-    </command>
-    <command id='logging print category-hex (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='category-hex' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with category/subsystem nr in hex (&apos;&lt;000b&gt;&apos;)' />
-      </params>
-    </command>
-    <command id='logging print level (0|1)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='level' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the log level name' />
-      </params>
-    </command>
-    <command id='logging print file (0|1|basename) [last]'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='print' doc='Log output settings' />
-        <param name='file' doc='Configure log message' />
-        <param name='0' doc='Don&apos;t prefix each log message' />
-        <param name='1' doc='Prefix each log message with the source file and line' />
-        <param name='basename' doc='Prefix each log message with the source file&apos;s basename (strip leading paths) and line' />
-        <param name='[last]' doc='Log source file info at the end of a log line. If omitted, log source file info just before the log text.' />
-      </params>
-    </command>
-    <command id='logging level (main|db|auc|ss|mslookup|lu|dgsm|lglobal|llapd|linp|lmux|lmi|lmib|lsms|lctrl|lgtp|lstats|lgsup|loap|lss7|lsccp|lsua|lm3ua|lmgcp|ljibuf|lrspro) (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='main' doc='Main Program' />
-        <param name='db' doc='Database Layer' />
-        <param name='auc' doc='Authentication Center' />
-        <param name='ss' doc='Supplementary Services' />
-        <param name='mslookup' doc='Mobile Subscriber Lookup' />
-        <param name='lu' doc='Location Updating' />
-        <param name='dgsm' doc='Distributed GSM: MS lookup and proxy' />
-        <param name='lglobal' doc='Library-internal global log family' />
-        <param name='llapd' doc='LAPD in libosmogsm' />
-        <param name='linp' doc='A-bis Intput Subsystem' />
-        <param name='lmux' doc='A-bis B-Subchannel TRAU Frame Multiplex' />
-        <param name='lmi' doc='A-bis Input Driver for Signalling' />
-        <param name='lmib' doc='A-bis Input Driver for B-Channels (voice)' />
-        <param name='lsms' doc='Layer3 Short Message Service (SMS)' />
-        <param name='lctrl' doc='Control Interface' />
-        <param name='lgtp' doc='GPRS GTP library' />
-        <param name='lstats' doc='Statistics messages and logging' />
-        <param name='lgsup' doc='Generic Subscriber Update Protocol' />
-        <param name='loap' doc='Osmocom Authentication Protocol' />
-        <param name='lss7' doc='libosmo-sigtran Signalling System 7' />
-        <param name='lsccp' doc='libosmo-sigtran SCCP Implementation' />
-        <param name='lsua' doc='libosmo-sigtran SCCP User Adaptation' />
-        <param name='lm3ua' doc='libosmo-sigtran MTP3 User Adaptation' />
-        <param name='lmgcp' doc='libosmo-mgcp Media Gateway Control Protocol' />
-        <param name='ljibuf' doc='libosmo-netif Jitter Buffer' />
-        <param name='lrspro' doc='Remote SIM protocol' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level set-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='set-all' doc='Once-off set all categories to the given log level. There is no single command to take back these changes -- each category is set to the given level, period.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='logging level force-all (debug|info|notice|error|fatal)'>
-      <params>
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Globally force all logging categories to a specific level. This is released by the &apos;no logging level force-all&apos; command. Note: any &apos;logging level &lt;category&gt; &lt;level&gt;&apos; commands will have no visible effect after this, until the forced level is released.' />
-        <param name='debug' doc='Log debug messages and higher levels' />
-        <param name='info' doc='Log informational messages and higher levels' />
-        <param name='notice' doc='Log noticeable messages and higher levels' />
-        <param name='error' doc='Log error messages and higher levels' />
-        <param name='fatal' doc='Log only fatal messages' />
-      </params>
-    </command>
-    <command id='no logging level force-all'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='logging' doc='Configure logging' />
-        <param name='level' doc='Set the log level for a specified category' />
-        <param name='force-all' doc='Release any globally forced log level set with &apos;logging level force-all &lt;level&gt;&apos;' />
-      </params>
-    </command>
-  </node>
-  <node id='config-stats'>
-    <name>config-stats</name>
-    <command id='local-ip ADDR'>
-      <params>
-        <param name='local-ip' doc='Set the IP address to which we bind locally' />
-        <param name='ADDR' doc='IP Address' />
-      </params>
-    </command>
-    <command id='no local-ip'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='local-ip' doc='Set the IP address to which we bind locally' />
-      </params>
-    </command>
-    <command id='remote-ip ADDR'>
-      <params>
-        <param name='remote-ip' doc='Set the remote IP address to which we connect' />
-        <param name='ADDR' doc='IP Address' />
-      </params>
-    </command>
-    <command id='remote-port &lt;1-65535&gt;'>
-      <params>
-        <param name='remote-port' doc='Set the remote port to which we connect' />
-        <param name='&lt;1-65535&gt;' doc='Remote port number' />
-      </params>
-    </command>
-    <command id='mtu &lt;100-65535&gt;'>
-      <params>
-        <param name='mtu' doc='Set the maximum packet size' />
-        <param name='&lt;100-65535&gt;' doc='Size in byte' />
-      </params>
-    </command>
-    <command id='no mtu'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='mtu' doc='Set the maximum packet size' />
-      </params>
-    </command>
-    <command id='prefix PREFIX'>
-      <params>
-        <param name='prefix' doc='Set the item name prefix' />
-        <param name='PREFIX' doc='The prefix string' />
-      </params>
-    </command>
-    <command id='no prefix'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='prefix' doc='Set the item name prefix' />
-      </params>
-    </command>
-    <command id='level (global|peer|subscriber)'>
-      <params>
-        <param name='level' doc='Set the maximum group level' />
-        <param name='global' doc='Report global groups only' />
-        <param name='peer' doc='Report global and network peer related groups' />
-        <param name='subscriber' doc='Report global, peer, and subscriber groups' />
-      </params>
-    </command>
-    <command id='enable'>
-      <params>
-        <param name='enable' doc='Enable the reporter' />
-      </params>
-    </command>
-    <command id='disable'>
-      <params>
-        <param name='disable' doc='Disable the reporter' />
-      </params>
-    </command>
-    <command id='flush-period &lt;0-65535&gt;'>
-      <params>
-        <param name='flush-period' doc='Configure stats sub-system' />
-        <param name='&lt;0-65535&gt;' doc='Send all stats even if they have not changed (i.e. force the flush)every N-th reporting interval. Set to 0 to disable regular flush (default).' />
-      </params>
-    </command>
-  </node>
-  <node id='config-line'>
-    <name>config-line</name>
-    <command id='login'>
-      <params>
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='no login'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='login' doc='Enable password checking' />
-      </params>
-    </command>
-    <command id='bind A.B.C.D [&lt;0-65535&gt;]'>
-      <params>
-        <param name='bind' doc='Accept VTY telnet connections on local interface' />
-        <param name='A.B.C.D' doc='Local interface IP address (default: 127.0.0.1)' />
-        <param name='[&lt;0-65535&gt;]' doc='Local TCP port number' />
-      </params>
-    </command>
-  </node>
-  <node id='config-ctrl'>
-    <name>config-ctrl</name>
-    <command id='bind A.B.C.D'>
-      <params>
-        <param name='bind' doc='Set bind address to listen for Control connections' />
-        <param name='A.B.C.D' doc='Local IP address (default 127.0.0.1)' />
-      </params>
-    </command>
-  </node>
-  <node id='config-cpu-sched'>
-    <name>config-cpu-sched</name>
-    <command id='policy rr &lt;1-32&gt;'>
-      <params>
-        <param name='policy' doc='Set the scheduling policy to use for the process' />
-        <param name='rr' doc='Use the SCHED_RR real-time scheduling algorithm' />
-        <param name='&lt;1-32&gt;' doc='Set the SCHED_RR real-time priority' />
-      </params>
-    </command>
-    <command id='cpu-affinity (self|all|&lt;0-4294967295&gt;|THREADNAME) CPUHEXMASK [delay]'>
-      <params>
-        <param name='cpu-affinity' doc='Set CPU affinity mask on a (group of) thread(s)' />
-        <param name='self' doc='Set CPU affinity mask on thread running the VTY' />
-        <param name='all' doc='Set CPU affinity mask on all process&apos; threads' />
-        <param name='&lt;0-4294967295&gt;' doc='Set CPU affinity mask on a thread with specified PID' />
-        <param name='THREADNAME' doc='Set CPU affinity mask on a thread with specified thread name' />
-        <param name='CPUHEXMASK' doc='CPU affinity mask' />
-        <param name='[delay]' doc='If set, delay applying the affinity mask now and let the app handle it at a later point' />
-      </params>
-    </command>
-  </node>
-  <node id='config-hlr'>
-    <name>config-hlr</name>
-    <command id='gsup'>
-      <params>
-        <param name='gsup' doc='Configure GSUP options' />
-      </params>
-    </command>
-    <command id='database PATH'>
-      <params>
-        <param name='database' doc='Set the path to the HLR database file' />
-        <param name='PATH' doc='Relative or absolute file system path to the database file (default is &apos;hlr.db&apos;)' />
-      </params>
-    </command>
-    <command id='euse NAME'>
-      <params>
-        <param name='euse' doc='Configure a particular External USSD Entity' />
-        <param name='NAME' doc='Alphanumeric name of the External USSD Entity' />
-      </params>
-    </command>
-    <command id='no euse NAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='euse' doc='Remove a particular External USSD Entity' />
-        <param name='NAME' doc='Alphanumeric name of the External USSD Entity' />
-      </params>
-    </command>
-    <command id='ussd route prefix PREFIX internal (own-msisdn|own-imsi)'>
-      <params>
-        <param name='ussd' doc='USSD Configuration' />
-        <param name='route' doc='Routing Configuration' />
-        <param name='prefix' doc='Prefix-Matching Route' />
-        <param name='PREFIX' doc='USSD Prefix' />
-        <param name='internal' doc='Internal USSD Handler' />
-        <param name='own-msisdn' doc='Respond with subscribers&apos; own MSISDN' />
-        <param name='own-imsi' doc='Respond with subscribers&apos; own IMSI' />
-      </params>
-    </command>
-    <command id='ussd route prefix PREFIX external EUSE'>
-      <params>
-        <param name='ussd' doc='USSD Configuration' />
-        <param name='route' doc='Routing Configuration' />
-        <param name='prefix' doc='Prefix-Matching Route' />
-        <param name='PREFIX' doc='USSD Prefix' />
-        <param name='external' doc='External USSD Handler' />
-        <param name='EUSE' doc='Name of External USSD Handler (IPA CCM ID)' />
-      </params>
-    </command>
-    <command id='no ussd route prefix PREFIX'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='ussd' doc='USSD Configuration' />
-        <param name='route' doc='Routing Configuration' />
-        <param name='prefix' doc='Prefix-Matching Route' />
-        <param name='PREFIX' doc='USSD Prefix' />
-      </params>
-    </command>
-    <command id='ussd default-route external EUSE'>
-      <params>
-        <param name='ussd' doc='USSD Configuration' />
-        <param name='default-route' doc='Configure default-route for all USSD to unknown destinations' />
-        <param name='external' doc='External USSD Handler' />
-        <param name='EUSE' doc='Name of External USSD Handler (IPA CCM ID)' />
-      </params>
-    </command>
-    <command id='no ussd default-route'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='ussd' doc='USSD Configuration' />
-        <param name='default-route' doc='Remove the default-route for all USSD to unknown destinations' />
-      </params>
-    </command>
-    <command id='ncss-guard-timeout &lt;0-255&gt;'>
-      <params>
-        <param name='ncss-guard-timeout' doc='Set guard timer for NCSS (call independent SS) session activity' />
-        <param name='&lt;0-255&gt;' doc='Guard timer value (sec.), or 0 to disable' />
-      </params>
-    </command>
-    <command id='store-imei'>
-      <params>
-        <param name='store-imei' doc='Save the IMEI in the database when receiving Check IMEI requests. Note that an MSC does not necessarily send Check IMEI requests (for OsmoMSC, you may want to set &apos;check-imei-rqd 1&apos;).' />
-      </params>
-    </command>
-    <command id='no store-imei'>
-      <params>
-        <param name='no' doc='Do not save the IMEI in the database, when receiving Check IMEI requests.' />
-        <param name='store-imei' doc='(null)' />
-      </params>
-    </command>
-    <command id='subscriber-create-on-demand (no-msisdn|&lt;3-15&gt;) (none|cs|ps|cs+ps)'>
-      <params>
-        <param name='subscriber-create-on-demand' doc='Make a new record when a subscriber is first seen.' />
-        <param name='no-msisdn' doc='Do not automatically assign MSISDN.' />
-        <param name='&lt;3-15&gt;' doc='Length of an automatically assigned MSISDN.' />
-        <param name='none' doc='Do not allow any NAM (Network Access Mode) by default.' />
-        <param name='cs' doc='Allow access to circuit switched NAM by default.' />
-        <param name='ps' doc='Allow access to packet switched NAM by default.' />
-        <param name='cs+ps' doc='Allow access to circuit and packet switched NAM by default.' />
-      </params>
-    </command>
-    <command id='no subscriber-create-on-demand'>
-      <params>
-        <param name='no' doc='Do not make a new record when a subscriber is first seen.' />
-        <param name='subscriber-create-on-demand' doc='(null)' />
-      </params>
-    </command>
-  </node>
-  <node id='config-hlr-gsup'>
-    <name>config-hlr-gsup</name>
-    <command id='bind ip A.B.C.D'>
-      <params>
-        <param name='bind' doc='Listen/Bind related socket option' />
-        <param name='ip' doc='IP information' />
-        <param name='A.B.C.D' doc='IPv4 Address to bind the GSUP interface to' />
-      </params>
-    </command>
-    <command id='ipa-name NAME'>
-      <params>
-        <param name='ipa-name' doc='Set the IPA name of this HLR, for proxying to remote HLRs' />
-        <param name='NAME' doc='A globally unique name for this HLR. For example: PLMN + redundancy server number: HLR-901-70-0. This name is used for GSUP routing and must be set if multiple HLRs interconnect (e.g. mslookup for Distributed GSM).' />
-      </params>
-    </command>
-  </node>
-  <node id='config-hlr-euse'>
-    <name>config-hlr-euse</name>
-  </node>
-  <node id='config-mslookup'>
-    <name>config-mslookup</name>
-    <command id='mdns bind [IP] [&lt;1-65535&gt;]'>
-      <params>
-        <param name='mdns' doc='Multicast DNS related configuration' />
-        <param name='bind' doc='Convenience shortcut: enable and configure both server and client for mDNS mslookup' />
-        <param name='[IP]' doc='multicast IPv4 address like 239.192.23.42 or IPv6 address like ff08::23:42' />
-        <param name='[&lt;1-65535&gt;]' doc='mDNS UDP Port number' />
-      </params>
-    </command>
-    <command id='mdns domain-suffix DOMAIN_SUFFIX'>
-      <params>
-        <param name='mdns' doc='Multicast DNS related configuration' />
-        <param name='domain-suffix' doc='mDNS domain suffix (default: mdns.osmocom.org). This is appended and stripped from mDNS packets during encoding/decoding, so we don&apos;t collide with top-level domains administrated by IANA' />
-        <param name='DOMAIN_SUFFIX' doc='mDNS domain suffix (default: mdns.osmocom.org). This is appended and stripped from mDNS packets during encoding/decoding, so we don&apos;t collide with top-level domains administrated by IANA' />
-      </params>
-    </command>
-    <command id='no mdns bind'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='mdns' doc='Disable both server and client for mDNS mslookup' />
-        <param name='bind' doc='(null)' />
-      </params>
-    </command>
-    <command id='server'>
-      <params>
-        <param name='server' doc='Enable and configure Distributed GSM mslookup server' />
-      </params>
-    </command>
-    <command id='no server'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='server' doc='Disable Distributed GSM mslookup server' />
-      </params>
-    </command>
-    <command id='client'>
-      <params>
-        <param name='client' doc='Enable and configure Distributed GSM mslookup client' />
-      </params>
-    </command>
-    <command id='no client'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='client' doc='Disable Distributed GSM mslookup client' />
-      </params>
-    </command>
-  </node>
-  <node id='config-mslookup-server'>
-    <name>config-mslookup-server</name>
-    <command id='mdns bind [IP] [&lt;1-65535&gt;]'>
-      <params>
-        <param name='mdns' doc='Multicast DNS related configuration' />
-        <param name='bind' doc='Configure where the mDNS server listens for mslookup requests' />
-        <param name='[IP]' doc='multicast IPv4 address like 239.192.23.42 or IPv6 address like ff08::23:42' />
-        <param name='[&lt;1-65535&gt;]' doc='mDNS UDP Port number' />
-      </params>
-    </command>
-    <command id='mdns domain-suffix DOMAIN_SUFFIX'>
-      <params>
-        <param name='mdns' doc='Multicast DNS related configuration' />
-        <param name='domain-suffix' doc='mDNS domain suffix (default: mdns.osmocom.org). This is appended and stripped from mDNS packets during encoding/decoding, so we don&apos;t collide with top-level domains administrated by IANA' />
-        <param name='DOMAIN_SUFFIX' doc='mDNS domain suffix (default: mdns.osmocom.org). This is appended and stripped from mDNS packets during encoding/decoding, so we don&apos;t collide with top-level domains administrated by IANA' />
-      </params>
-    </command>
-    <command id='no mdns bind'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='mdns' doc='Disable server for mDNS mslookup (do not answer remote requests)' />
-        <param name='bind' doc='(null)' />
-      </params>
-    </command>
-    <command id='service NAME at IP &lt;1-65535&gt;'>
-      <params>
-        <param name='service' doc='Configure addresses of local services, as sent in replies to remote mslookup requests.' />
-        <param name='NAME' doc='mslookup service name, e.g. sip.voice or smpp.sms' />
-        <param name='at' doc='at' />
-        <param name='IP' doc='IPv4 address like 1.2.3.4 or IPv6 address like a:b:c:d::1' />
-        <param name='&lt;1-65535&gt;' doc='Service-specific port number' />
-      </params>
-    </command>
-    <command id='no service NAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Remove one or more service address entries' />
-        <param name='NAME' doc='mslookup service name, e.g. sip.voice or smpp.sms' />
-      </params>
-    </command>
-    <command id='no service NAME at IP &lt;1-65535&gt;'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Remove one or more service address entries' />
-        <param name='NAME' doc='mslookup service name, e.g. sip.voice or smpp.sms' />
-        <param name='at' doc='at' />
-        <param name='IP' doc='IPv4 address like 1.2.3.4 or IPv6 address like a:b:c:d::1' />
-        <param name='&lt;1-65535&gt;' doc='Service-specific port number' />
-      </params>
-    </command>
-    <command id='msc ipa-name .IPA_NAME'>
-      <params>
-        <param name='msc' doc='Configure services for individual local MSCs' />
-        <param name='ipa-name' doc='Identify locally connected MSC by IPA Unit Name' />
-        <param name='.IPA_NAME' doc='IPA Unit Name of the local MSC to configure' />
-      </params>
-    </command>
-  </node>
-  <node id='config-mslookup-server-msc'>
-    <name>config-mslookup-server-msc</name>
-    <command id='service NAME at IP &lt;1-65535&gt;'>
-      <params>
-        <param name='service' doc='Configure addresses of local services, as sent in replies to remote mslookup requests.' />
-        <param name='NAME' doc='mslookup service name, e.g. sip.voice or smpp.sms' />
-        <param name='at' doc='at' />
-        <param name='IP' doc='IPv4 address like 1.2.3.4 or IPv6 address like a:b:c:d::1' />
-        <param name='&lt;1-65535&gt;' doc='Service-specific port number' />
-      </params>
-    </command>
-    <command id='no service NAME'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Remove one or more service address entries' />
-        <param name='NAME' doc='mslookup service name, e.g. sip.voice or smpp.sms' />
-      </params>
-    </command>
-    <command id='no service NAME at IP &lt;1-65535&gt;'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='service' doc='Remove one or more service address entries' />
-        <param name='NAME' doc='mslookup service name, e.g. sip.voice or smpp.sms' />
-        <param name='at' doc='at' />
-        <param name='IP' doc='IPv4 address like 1.2.3.4 or IPv6 address like a:b:c:d::1' />
-        <param name='&lt;1-65535&gt;' doc='Service-specific port number' />
-      </params>
-    </command>
-  </node>
-  <node id='config-mslookup-client'>
-    <name>config-mslookup-client</name>
-    <command id='timeout &lt;1-100000&gt;'>
-      <params>
-        <param name='timeout' doc='How long should the mslookup client wait for remote responses before evaluating received results' />
-        <param name='&lt;1-100000&gt;' doc='timeout in milliseconds' />
-      </params>
-    </command>
-    <command id='mdns bind [IP] [&lt;1-65535&gt;]'>
-      <params>
-        <param name='mdns' doc='Multicast DNS related configuration' />
-        <param name='bind' doc='Enable mDNS client, and configure multicast address to send mDNS mslookup requests to' />
-        <param name='[IP]' doc='multicast IPv4 address like 239.192.23.42 or IPv6 address like ff08::23:42' />
-        <param name='[&lt;1-65535&gt;]' doc='mDNS UDP Port number' />
-      </params>
-    </command>
-    <command id='mdns domain-suffix DOMAIN_SUFFIX'>
-      <params>
-        <param name='mdns' doc='Multicast DNS related configuration' />
-        <param name='domain-suffix' doc='mDNS domain suffix (default: mdns.osmocom.org). This is appended and stripped from mDNS packets during encoding/decoding, so we don&apos;t collide with top-level domains administrated by IANA' />
-        <param name='DOMAIN_SUFFIX' doc='mDNS domain suffix (default: mdns.osmocom.org). This is appended and stripped from mDNS packets during encoding/decoding, so we don&apos;t collide with top-level domains administrated by IANA' />
-      </params>
-    </command>
-    <command id='no mdns bind'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='mdns' doc='Disable mDNS client, do not query remote services by mDNS' />
-        <param name='bind' doc='(null)' />
-      </params>
-    </command>
-    <command id='gateway-proxy IP [&lt;1-65535&gt;]'>
-      <params>
-        <param name='gateway-proxy' doc='Configure a fixed IP address to send all GSUP requests for unknown IMSIs to, without invoking a lookup for IMSI' />
-        <param name='IP' doc='IP address of the remote HLR' />
-        <param name='[&lt;1-65535&gt;]' doc='GSUP port number (omit for default 4222)' />
-      </params>
-    </command>
-    <command id='no gateway-proxy'>
-      <params>
-        <param name='no' doc='Negate a command or set its defaults' />
-        <param name='gateway-proxy' doc='Disable gateway proxy for GSUP with unknown IMSIs' />
-      </params>
-    </command>
-  </node>
-</vtydoc>