! Configuration rendered by osmo-gsm-tester
password foo
!
log stderr
 logging filter all 1
 logging color 1
 logging print category 1
 logging print extended-timestamp 1
 logging level all debug
!
line vty
 no login
 bind ${nitb.ip_address.addr}
!
e1_input
 e1_line 0 driver ipa
 ipa bind ${nitb.ip_address.addr}
network
 network country code ${nitb.net.mcc}
 mobile network code ${nitb.net.mnc}
 short name ${nitb.net.short_name}
 long name ${nitb.net.long_name}
 auth policy ${nitb.net.auth_policy}
 location updating reject cause 13
 encryption ${nitb.net.encryption}
 neci 1
 rrlp mode none
 mm info 1
 handover 0
 handover window rxlev averaging 10
 handover window rxqual averaging 1
 handover window rxlev neighbor averaging 10
 handover power budget interval 6
 handover power budget hysteresis 3
 handover maximum distance 9999
%for bts in nitb.net.bts_list:
 bts ${loop.index}
  type ${bts.osmobsc_bts_type}
  band ${bts.band}
  cell_identity ${bts.cell_identity}
  location_area_code ${bts.location_area_code}
  training_sequence_code 7
  base_station_id_code ${bts.base_station_id_code}
  ms max power 33
  cell reselection hysteresis 4
  rxlev access min 0
  channel allocator ascending
  rach tx integer 9
  rach max transmission 7
  ip.access unit_id ${bts.ipa_unit_id} 0
  oml ip.access stream_id ${bts.stream_id} line 0
  gprs mode none
% for trx in bts.trx_list:
  trx ${loop.index}
   rf_locked 0
   arfcn ${trx.arfcn}
   nominal power ${trx.nominal_power}
   max_power_red ${trx.max_power_red}
   rsl e1 tei 0
%  for ts in trx.timeslot_list:
   timeslot ${loop.index}
    phys_chan_config ${ts.phys_chan_config}
%  endfor
% endfor
%endfor
smpp
 local-tcp-ip ${nitb.ip_address.addr} 2775
 system-id test-nitb
 policy ${smsc.policy}
%for esme in smsc.esme_list:
 esme ${esme.system_id}
% if esme.password == '':
  no password
% else:
  password ${esme.password}
% endif
  default-route
%endfor
ctrl
 bind ${nitb.ip_address.addr}