review jenkins scripts
Change-Id: I420910bd2d30e96605ecf3acb779ce726c75d912
diff --git a/contrib/jenkins-openbsc-build.sh b/contrib/jenkins-openbsc-build.sh
deleted file mode 100755
index f2be853..0000000
--- a/contrib/jenkins-openbsc-build.sh
+++ /dev/null
@@ -1,142 +0,0 @@
-set -e -x
-
-prefix_base="`pwd`"
-prefix_dirname="inst-openbsc"
-prefix="$prefix_base/$prefix_dirname"
-
-reposes="
-libosmocore
-libosmo-abis
-libosmo-netif
-openggsn
-libsmpp34
-libosmo-sccp
-openbsc/openbsc
-"
-
-osmo_gsm_tester_host=root@10.9.1.190
-osmo_gsm_tester_dir="/var/tmp/osmo-gsm-tester"
-tmp_dir="/var/tmp/prep-osmo-gsm-tester"
-arch="x86_64"
-archive_name="openbsc.$arch-build-$BUILD_NUMBER"
-archive="$archive_name.tgz"
-manifest="checksums.md5"
-test_report="test-report.xml"
-test_timeout_sec=120
-
-rm -rf $prefix
-mkdir -p $prefix
-
-opt_prefix=""
-if [ -n "$prefix" ]; then
- export LD_LIBRARY_PATH="$prefix"/lib
- export PKG_CONFIG_PATH="$prefix"/lib/pkgconfig
- opt_prefix="--prefix=$prefix"
-fi
-
-for r in $reposes; do
- make -C "$r" clean || true
-done
-
-for r in $reposes; do
-
- cd "$r"
-
- echo "$(git rev-parse HEAD) $r" >> "$prefix/openbsc_git_hashes.txt"
-
- autoreconf -fi
-
- opt_enable=""
- if [ "$r" = 'openbsc/openbsc' ]; then
- opt_enable="--enable-smpp --enable-osmo-bsc --enable-nat"
- fi
-
- ./configure "$opt_prefix" $opt_enable
-
- make -j || make || make
- if [ "$r" != asn1c ]; then
- if [ "$r" = 'libosmo-netif' ]; then
- # skip clock dependent test in libosmo-netif
- make check TESTSUITEFLAGS='-k !osmux_test'
- else
- make check
- fi
- fi
- make install
- cd ..
-done
-
-# create test session directory, archive and manifest
-
-cd $prefix_base
-
-ts_name="$NODE_NAME-$BUILD_TAG"
-local_ts_base="./compose_ts"
-local_ts_dir="$local_ts_base/$ts_name"
-
-rm -rf "$local_ts_base" || true
-mkdir -p "$local_ts_dir"
-
-# create archive of openbsc build
-cd "$prefix_dirname"
-tar czf "../$local_ts_dir/$archive" *
-cd ..
-# move archived bts builds into test session directory
-mv $WORKSPACE/osmo-bts-*.tgz "$local_ts_dir"
-cd "$local_ts_dir"
-md5sum *.tgz > $manifest
-cd -
-
-# transfer test session directory to temporary dir on osmo-gsm-tester host
-# when transfer is complete, move the directory to its final location (where
-# the osmo-gsm-tester will recognize the session directory and start the session
-
-ssh $osmo_gsm_tester_host "mkdir -p $tmp_dir"
-scp -r "$local_ts_dir" $osmo_gsm_tester_host:$tmp_dir/
-ssh $osmo_gsm_tester_host "mv $tmp_dir/$ts_name $osmo_gsm_tester_dir"
-
-# poll for test status
-ts_dir="$osmo_gsm_tester_dir/$ts_name"
-
-set +x
-ts_log=$ts_dir/test-session.log
-echo "Waiting for test session log to be created"
-while /bin/true; do
- if ssh $osmo_gsm_tester_host "test -e $ts_log"; then
- break
- fi
- sleep 1
-done
-
-echo "Following test session log"
-# NOTE this will leave dead ssh session with tail running
-ssh $osmo_gsm_tester_host "tail -f $ts_log" &
-
-echo "Waiting for test session to complete"
-while /bin/true; do
-# if [ "$test_timeout_sec" = "0" ]; then
-# echo "TIMEOUT test execution timeout ($test_timeout_sec seconds) exceeded!"
-# exit 1
-# fi
- if ssh $osmo_gsm_tester_host "test -e $ts_dir/$test_report"; then
- break
- fi
- sleep 1
-# test_timeout_sec="$(($test_timeout_sec - 1))"
-done
-set -x
-
-# use pgrep to terminate the ssh/tail (if it still exists)
-remote_tail_pid=`ssh $osmo_gsm_tester_host "pgrep -fx 'tail -f $ts_log'"`
-echo "remote_tail_pid = $remote_tail_pid"
-ssh $osmo_gsm_tester_host "kill $remote_tail_pid"
-
-# copy contents of test session directory back and remove it from the osmo-gsm-tester host
-
-rsync -av -e ssh --exclude='inst-*' --exclude='tmp*' $osmo_gsm_tester_host:$ts_dir/ "$local_ts_dir/"
-
-ssh $osmo_gsm_tester_host "/usr/local/src/osmo-gsm-tester/contrib/ts-dir-cleanup.sh"
-
-# touch test-report.xml (to make up for clock drift between jenkins and build slave)
-
-touch "$local_ts_dir/$test_report"
diff --git a/contrib/jenkins-osmo-bts-octphy.sh b/contrib/jenkins-osmo-bts-octphy.sh
index 0a5a88c..4284262 100755
--- a/contrib/jenkins-osmo-bts-octphy.sh
+++ b/contrib/jenkins-osmo-bts-octphy.sh
@@ -1,94 +1,65 @@
#!/bin/sh
+set -x -e
-set -e
+base="$PWD"
+prefix="$base/inst-osmo-bts-octphy"
-OPTION_DO_CLONE=0
-OPTION_DO_CLEAN=0
-OPTION_DO_TEST=1
+rm -f "$base/osmo-bts-octphy*.tgz"
-PREFIX=`pwd`/inst-osmo-bts-octphy
-
-# NOTE Make sure either 'octphy-2g-headers' (prefered) or
-# 'octsdr-2g' is listed among the repositories
-
-octbts_repos="libosmocore
+deps="
+libosmocore
libosmo-abis
-openbsc/openbsc
-octphy-2g-headers
-osmo-bts"
+osmo-bts
+"
-clone_repos() {
- repos="$1"
- for repo in $repos; do
- if [ -e $repo ]; then
- continue
- fi
- if [ "$repo" = "libosmocore" ]; then
- url="git://git.osmocom.org/libosmocore.git"
- elif [ "$repo" = "libosmo-abis" ]; then
- url="git://git.osmocom.org/libosmo-abis.git"
- elif [ "$repo" = "libosmo-netif" ]; then
- url="git://git.osmocom.org/libosmo-netif.git"
- elif [ "$repo" = "openbsc/openbsc" ]; then
- url="git://git.osmocom.org/openbsc"
- elif [ "$repo" = "octphy-2g-headers" ]; then
- url="git://git.osmocom.org/octphy-2g-headers"
- elif [ "$repo" = "octsdr-2g" ]; then
- # NOTE acutally we only need the headers from the octphy-2g-headers
- # repository but this (private) repository contains more recent versions
- url="ssh://git@git.admin.sysmocom.de/octasic/octsdr-2g"
- elif [ "$repo" = "osmo-bts" ]; then
- url="git://git.osmocom.org/osmo-bts.git"
- else
- exit 2
- fi
- git clone $url
- done
+have_repo() {
+ repo="$1"
+ cd "$base"
+ if [ ! -e "$repo" ]; then
+ set +x
+ echo "MISSING REPOSITORY: $repo"
+ echo "should be provided by the jenkins workspace"
+ exit 1
+ fi
+ cd "$repo"
+ git clean -dxf
+ cd "$base"
}
-main() {
- repos="$1"
- if [ $OPTION_DO_CLONE -eq 1 ]; then clone_repos "$repos"; fi
- rm -rf $PREFIX
- mkdir -p $PREFIX
- for repo in $repos; do
- if [ "$repo" = "openbsc/openbsc" ]; then
- continue
- fi
- if [ "$repo" = "octphy-2g-headers" ]; then
- OCTPHY_INCDIR=`pwd`/octphy-2g-headers
- continue
- fi
- if [ "$repo" = "octsdr-2g" ]; then
- cd $repo
- git checkout 5c7166bab0a0f2d8a9664213d18642ae305e7004
- cd -
- OCTPHY_INCDIR=`pwd`/octsdr-2g/software/include
- continue
- fi
- cd $repo
- if [ $OPTION_DO_CLEAN -eq 1 ]; then git clean -dxf; fi
- echo "$(git rev-parse HEAD) $repo" >> "$PREFIX/osmo-bts-octphy_git_hashes.txt"
- autoreconf -fi
- if [ "$repo" != "libosmocore" ]; then
- export PKG_CONFIG_PATH=$PREFIX/lib/pkgconfig
- export LD_LIBRARY_PATH=$PREFIX/lib:/usr/local/lib
- fi
- config_opts=""
- case "$repo" in
- 'osmo-bts') config_opts="$config_opts --enable-octphy --with-octsdr-2g=$OCTPHY_INCDIR"
- esac
- ./configure --prefix=$PREFIX $config_opts
- make -j8
- if [ $OPTION_DO_TEST -eq 1 ]; then make check; fi
- make install
- cd ..
- done
-}
+# for gsm_data_shared.*
+have_repo openbsc
-set -x
-main "$octbts_repos"
+# octphy headers
+have_repo octphy-2g-headers
-# build the archive that is going to be copied to the tester and then to the BTS
-rm -f $WORKSPACE/osmo-bts-octphy*.tgz
-tar czf $WORKSPACE/osmo-bts-octphy.build-$BUILD_NUMBER.tgz inst-osmo-bts-octphy
+
+rm -rf "$prefix"
+mkdir -p "$prefix"
+
+export PKG_CONFIG_PATH="$prefix/lib/pkgconfig"
+export LD_LIBRARY_PATH="$prefix/lib"
+
+for dep in $deps; do
+ have_repo "$dep"
+ cd "$dep"
+ rm -rf *
+ git checkout .
+
+ echo "$(git rev-parse HEAD) $dep" >> "$prefix/osmo-bts-octphy_git_hashes.txt"
+
+ autoreconf -fi
+
+ config_opts=""
+
+ case "$repo" in
+ 'osmo-bts') config_opts="$config_opts --enable-octphy --with-octsdr-2g=$base/octphy-2g-headers" ;;
+ esac
+
+ ./configure --prefix="$prefix" $config_opts
+ make -j8
+ make install
+done
+
+# build the archive that is going to be copied to the tester
+cd "$prefix"
+tar czf "$base/osmo-bts-octphy.build-${BUILD_NUMBER}.tgz" *
diff --git a/contrib/jenkins-osmo-bts-sysmo.sh b/contrib/jenkins-osmo-bts-sysmo.sh
index 6edb7d3..7870259 100755
--- a/contrib/jenkins-osmo-bts-sysmo.sh
+++ b/contrib/jenkins-osmo-bts-sysmo.sh
@@ -1,3 +1,4 @@
+#!/bin/sh
set -e -x
deps="
@@ -7,6 +8,7 @@
"
base="$PWD"
+rm -f "$base/osmo-bts-sysmo.*.tgz"
have_repo() {
repo="$1"
@@ -31,6 +33,7 @@
. /opt/poky/1.5.4/environment-setup-armv5te-poky-linux-gnueabi
+# Cross-compilation: all installations need to be put in the sysmo SDK sysroot
export DESTDIR=/opt/poky/1.5.4/sysroots/armv5te-poky-linux-gnueabi
prefix_base="/usr/local/jenkins-build"
@@ -42,24 +45,25 @@
mkdir -p "$prefix_real"
for dep in $deps; do
- cd "$base/$dep"
+ cd "$base/$dep"
+ rm -rf *
+ git checkout .
- echo "$(git rev-parse HEAD) $dep" >> "$prefix_real/osmo-bts-sysmo_git_hashes.txt"
+ echo "$(git rev-parse HEAD) $dep" >> "$prefix_real/osmo-bts-sysmo_git_hashes.txt"
- autoreconf -fi
+ autoreconf -fi
- config_opts=""
- case "$dep" in
- 'libosmocore') config_opts="--disable-pcsc" ;;
- 'osmo-bts') config_opts="--enable-sysmocom-bts --with-openbsc=$base/openbsc/openbsc/include" ;;
- esac
+ config_opts=""
+ case "$dep" in
+ 'libosmocore') config_opts="--disable-pcsc" ;;
+ 'osmo-bts') config_opts="--enable-sysmocom-bts --with-openbsc=$base/openbsc/openbsc/include" ;;
+ esac
- ./configure --prefix="$prefix" $CONFIGURE_FLAGS $config_opts
- make -j8
- make install
+ ./configure --prefix="$prefix" $CONFIGURE_FLAGS $config_opts
+ make -j8
+ make install
done
# build the archive that is going to be copied to the tester and then to the BTS
-rm -f "$base/osmo-bts-sysmo.*.tgz"
-cd "$prefix_base_real"
+cd "$prefix_real"
tar cvzf "$base/osmo-bts-sysmo.build-${BUILD_NUMBER}.tgz" *
diff --git a/contrib/jenkins-osmo-bts-trx.sh b/contrib/jenkins-osmo-bts-trx.sh
index 713f974..acdcc89 100755
--- a/contrib/jenkins-osmo-bts-trx.sh
+++ b/contrib/jenkins-osmo-bts-trx.sh
@@ -1,8 +1,10 @@
+#!/bin/sh
set -x -e
base="$PWD"
-inst="inst-osmo-bts-trx"
-prefix="$base/$inst"
+prefix="$base/inst-osmo-bts-trx"
+
+rm -f "$base/osmo-bts-trx*.tgz"
deps="
libosmocore
@@ -38,6 +40,8 @@
for dep in $deps; do
have_repo "$dep"
cd "$dep"
+ rm -rf *
+ git checkout .
echo "$(git rev-parse HEAD) $dep" >> "$prefix/osmo-bts-trx_osmo-trx_git_hashes.txt"
@@ -56,6 +60,5 @@
done
# build the archive that is going to be copied to the tester
-rm -f "$base/osmo-bts-trx*.tgz"
-cd "$base"
-tar czf "osmo-bts-trx.build-${BUILD_NUMBER}.tgz" "$inst"
+cd "$prefix"
+tar czf "$base/osmo-bts-trx.build-${BUILD_NUMBER}.tgz" *
diff --git a/contrib/jenkins-osmo-nitb.sh b/contrib/jenkins-osmo-nitb.sh
new file mode 100755
index 0000000..e655082
--- /dev/null
+++ b/contrib/jenkins-osmo-nitb.sh
@@ -0,0 +1,63 @@
+set -e -x
+
+base="$PWD"
+prefix="$base/inst-osmo-nitb"
+
+rm -f "$base/osmo-nitb*.tgz"
+
+deps="
+libosmocore
+libosmo-abis
+libosmo-netif
+openggsn
+libsmpp34
+libosmo-sccp
+openbsc
+"
+
+have_repo() {
+ repo="$1"
+ cd "$base"
+ if [ ! -e "$repo" ]; then
+ set +x
+ echo "MISSING REPOSITORY: $repo"
+ echo "should be provided by the jenkins workspace"
+ exit 1
+ fi
+ cd "$repo"
+ git clean -dxf
+ cd "$base"
+}
+
+rm -rf "$prefix"
+mkdir -p "$prefix"
+
+export PKG_CONFIG_PATH="$prefix/lib/pkgconfig"
+export LD_LIBRARY_PATH="$prefix/lib"
+
+for dep in $deps; do
+ have_repo "$dep"
+ cd "$dep"
+ rm -rf *
+ git checkout .
+
+ echo "$(git rev-parse HEAD) $dep" >> "$prefix/osmo-nitb_git_hashes.txt"
+
+ config_opts=""
+
+ case "$dep" in
+ 'openbsc')
+ config_opts="$config_opts --enable-smpp --enable-osmo-bsc --enable-nat"
+ cd openbsc/
+ ;;
+ esac
+
+ autoreconf -fi
+ ./configure --prefix="$prefix" $config_opts
+ make -j8 || make # libsmpp34 can't build in parallel
+ make install
+done
+
+# build the archive that is going to be copied to the tester
+cd "$prefix"
+tar czf "$base/osmo-nitb.build-${BUILD_NUMBER}.tgz" *
diff --git a/contrib/jenkins-remote-update.sh b/contrib/jenkins-remote-update.sh
new file mode 100755
index 0000000..3b4fc74
--- /dev/null
+++ b/contrib/jenkins-remote-update.sh
@@ -0,0 +1,24 @@
+#!/bin/sh
+set -e -x
+
+if [ -z "$OSMO_GSM_TESTER_REMOTE_MAIN_UNIT" ]; then
+ echo "To run the tests from jenkins, a main unit host must be defined."
+ echo "e.g. OSMO_GSM_TESTER_REMOTE_MAIN_UNIT=\"user@10.9.8.7\""
+fi
+
+osmo_gsm_tester_host="$OSMO_GSM_TESTER_REMOTE_MAIN_UNIT"
+osmo_gsm_tester_src="${OSMO_GSM_TESTER_REMOTE_SRC:-/usr/local/src/osmo-gsm-tester}"
+
+if ssh "$osmo_gsm_tester_host" "test -d \"$osmo_gsm_tester_src\"" ; then
+ # exists
+ status="$(ssh "$osmo_gsm_tester_host" "git -C \"$osmo_gsm_tester_src\" status --porcelain")"
+ if [ "x$status" != "x" ]; then
+ echo "Remote osmo-gsm-tester is not clean: $osmo_gsm_tester_host:$osmo_gsm_tester_src"
+ echo "$status"
+ exit 1
+ fi
+ ssh "$osmo_gsm_tester_host" "cd \"$osmo_gsm_tester_src\"; git clean -fdx; git pull"
+else
+ osmo_gsm_tester_src_dirname="$(dirname "$osmo_gsm_tester_src")"
+ ssh "$osmo_gsm_tester_host" "git clone git://git.osmocom.org/osmo-gsm-tester.git \"$osmo_gsm_tester_src\""
+fi
diff --git a/contrib/jenkins-run.sh b/contrib/jenkins-run.sh
new file mode 100755
index 0000000..62394d1
--- /dev/null
+++ b/contrib/jenkins-run.sh
@@ -0,0 +1,36 @@
+#!/bin/sh
+set -e -x
+
+if [ -z "$OSMO_GSM_TESTER_REMOTE_MAIN_UNIT" ]; then
+ echo "To run the tests from jenkins, a main unit host must be defined."
+ echo "e.g. OSMO_GSM_TESTER_REMOTE_MAIN_UNIT=\"user@10.9.8.7\""
+fi
+
+osmo_gsm_tester_host="$OSMO_GSM_TESTER_REMOTE_MAIN_UNIT"
+osmo_gsm_tester_src="${OSMO_GSM_TESTER_REMOTE_SRC:-/usr/local/src/osmo-gsm-tester}"
+osmo_gsm_tester_dir="/var/tmp/osmo-gsm-tester"
+tmp_dir="/var/tmp/prep-osmo-gsm-tester"
+
+trial_name="$NODE_NAME-$BUILD_TAG"
+local_trial_base="./compose_trial"
+local_trial_dir="$local_trial_base/$trial_name"
+
+rm -rf "$local_trial_base" || true
+mkdir -p "$local_trial_dir"
+
+# Add archives from other jenkins builds.
+# This jenkins job must be configured to copy *.tgz artifacts to the
+# workspace from the various jenkins*bts*.sh runs.
+mv $WORKSPACE/*.tgz "$local_trial_dir"
+cd "$local_trial_dir"
+md5sum *.tgz > checksums.md5
+cd -
+
+ssh "$osmo_gsm_tester_host" "$osmo_gsm_tester_src/contrib/trials-cleanup.sh"
+
+ssh "$osmo_gsm_tester_host" "mkdir -p $tmp_dir"
+scp -r "$local_trial_dir" $osmo_gsm_tester_host:$tmp_dir/
+ssh "$osmo_gsm_tester_host" "mv $tmp_dir/$trial_name $osmo_gsm_tester_dir"
+trial_dir="$osmo_gsm_tester_dir/$trial_name"
+
+ssh "$osmo_gsm_tester_host" "$osmo_gsm_tester_src/src/osmo-gsm-tester.py $trial_dir"
diff --git a/contrib/trials-cleanup.sh b/contrib/trials-cleanup.sh
new file mode 100755
index 0000000..2ad8c93
--- /dev/null
+++ b/contrib/trials-cleanup.sh
@@ -0,0 +1,30 @@
+#!/bin/sh
+# Remove all but the N newest test run dirs (that have been started)
+
+trial_rx_dir="$1"
+trial_prep_dir="$2"
+if [ -z "$trial_rx_dir" ]; then
+ trial_rx_dir="/var/tmp/osmo-gsm-tester"
+fi
+if [ -z "$trial_prep_dir" ]; then
+ trial_prep_dir="/var/tmp/prep-osmo-gsm-tester"
+fi
+
+mkdir -p "$trial_prep_dir"
+
+rm_trial() {
+ trial_dir="$1"
+ trial_name="$(basename "$trial_dir")"
+ echo "Removing: $(ls -ld "$trial_dir")"
+ # ensure atomic removal, so that the gsm-tester doesn't take it as a
+ # newly added dir (can happen when the 'SEEN' marker is removed first).
+ mv "$trial_dir" "$trial_prep_dir/"
+ rm -rf "$trial_prep_dir/$trial_name"
+}
+
+# keep the N newest test session dirs that have been started: find all that
+# have been started sorted by time, then discard all but the N newest ones.
+
+for seen in $(ls -1t "$trial_rx_dir"/*/SEEN | tail -n +31); do
+ rm_trial "$(dirname "$seen")"
+done
diff --git a/contrib/ts-dir-cleanup.sh b/contrib/ts-dir-cleanup.sh
deleted file mode 100755
index ae5ea04..0000000
--- a/contrib/ts-dir-cleanup.sh
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-# Remove all but the N newest test run dirs (that have been started)
-
-ts_rx_dir="$1"
-ts_prep_dir="$2"
-if [ -z "$ts_rx_dir" ]; then
- ts_rx_dir="/var/tmp/osmo-gsm-tester"
-fi
-if [ -z "$ts_prep_dir" ]; then
- ts_prep_dir="/var/tmp/prep-osmo-gsm-tester"
-fi
-
-mkdir -p "$ts_prep_dir"
-
-rm_ts() {
- ts_dir="$1"
- ts_name="$(basename "$ts_dir")"
- echo "Removing: $(ls -ld "$ts_dir")"
- # ensure atomic removal, so that the gsm-tester doesn't take it as a
- # newly added dir (can happen when the 'SEEN' marker is removed first).
- mv "$ts_dir" "$ts_prep_dir/"
- rm -rf "$ts_prep_dir/$ts_name"
-}
-
-# keep the N newest test session dirs that have been started: find all that
-# have been started sorted by time, then discard all but the N newest ones.
-
-for seen in $(ls -1t "$ts_rx_dir"/*/SEEN | tail -n +31); do
- rm_ts "$(dirname "$seen")"
-done
diff --git a/selftest/real_suite/default-suites.conf b/selftest/real_suite/default-suites.conf
new file mode 100644
index 0000000..84a28b6
--- /dev/null
+++ b/selftest/real_suite/default-suites.conf
@@ -0,0 +1 @@
+- sms:trx
diff --git a/src/run_once.py b/src/osmo-gsm-tester.py
similarity index 94%
rename from src/run_once.py
rename to src/osmo-gsm-tester.py
index 88eed28..80fec4f 100755
--- a/src/run_once.py
+++ b/src/osmo-gsm-tester.py
@@ -66,7 +66,8 @@
created, which will collect logs and reports.
'''
-from osmo_gsm_tester import trial, suite, log, __version__
+from osmo_gsm_tester import __version__
+from osmo_gsm_tester import trial, suite, log, config
if __name__ == '__main__':
import argparse
@@ -110,6 +111,12 @@
# combination_strs.extend(config.get_series(series))
if not combination_strs:
+ combination_strs = config.read_config_file(config.DEFAULT_SUITES_CONF, if_missing_return=[])
+
+ if combination_strs:
+ print('Running default suites:\n ' + ('\n '.join(combination_strs)))
+
+ if not combination_strs:
raise RuntimeError('Need at least one suite:scenario or series to run')
suite_scenarios = []
diff --git a/src/osmo_gsm_tester/config.py b/src/osmo_gsm_tester/config.py
index 0c820c3..6275a47 100644
--- a/src/osmo_gsm_tester/config.py
+++ b/src/osmo_gsm_tester/config.py
@@ -67,6 +67,7 @@
]
PATHS_CONF = 'paths.conf'
+DEFAULT_SUITES_CONF = 'default-suites.conf'
PATH_STATE_DIR = 'state_dir'
PATH_SUITES_DIR = 'suites_dir'
PATH_SCENARIOS_DIR = 'scenarios_dir'