diff --git a/src/osmo_gsm_tester/templates/srsenb_rr.conf.tmpl b/src/osmo_gsm_tester/templates/srsenb_rr.conf.tmpl
new file mode 100644
index 0000000..1fff189
--- /dev/null
+++ b/src/osmo_gsm_tester/templates/srsenb_rr.conf.tmpl
@@ -0,0 +1,90 @@
+mac_cnfg =
+{
+  phr_cnfg = 
+  {
+    dl_pathloss_change = "dB3"; // Valid: 1, 3, 6 or INFINITY
+    periodic_phr_timer = 50;
+    prohibit_phr_timer = 0;
+  };
+  ulsch_cnfg = 
+  {
+    max_harq_tx = 4;
+    periodic_bsr_timer = 20; // in ms
+    retx_bsr_timer = 320;   // in ms
+  };
+  
+  time_alignment_timer = -1; // -1 is infinity
+};
+
+phy_cnfg =
+{
+  phich_cnfg = 
+  {
+    duration  = "Normal";
+    resources = "1/6"; 
+  };
+
+  pusch_cnfg_ded =
+  {
+    beta_offset_ack_idx = 6;
+    beta_offset_ri_idx  = 6;
+    beta_offset_cqi_idx = 6;
+  };
+  
+  // PUCCH-SR resources are scheduled on time-frequeny domain first, then multiplexed in the same resource. 
+  sched_request_cnfg =
+  {
+    dsr_trans_max = 64;
+    period = 20;       // in ms
+    subframe = [1];    // vector of subframe indices allowed for SR transmissions 
+    nof_prb = 2;       // number of PRBs on each extreme used for SR (total prb is twice this number)
+  };
+  cqi_report_cnfg =
+  { 
+    mode = "periodic";
+    simultaneousAckCQI = true; 
+    period = 40; // in ms
+    subframe = [0];
+    nof_prb = 2; 
+    m_ri = 8; // RI period in CQI period
+  };
+};
+
+cell_list =
+(
+  {
+    // rf_port = 0;
+    // cell_id = 0x01;
+    // tac = 0x0001;
+    // pci = 1;
+    // root_seq_idx = 204;
+    // dl_earfcn = 3400;
+    // ul_earfcn = 474;
+    ho_active = false;
+
+    // CA cells
+    scell_list = (
+      {cell_id = 0x02; cross_carrier_scheduling = false; scheduling_cell_id = 0x02; ul_allowed = true}
+    )
+
+    // Cells available for handover
+    meas_cell_list =
+    (
+      {
+        eci = 0x19C02;
+        dl_earfcn = 2850;
+        pci = 2;
+      }
+    );
+
+    // ReportCfg (only A3 supported)
+    meas_report_desc = {
+      a3_report_type = "RSRP";
+      a3_offset = 6;
+      a3_hysteresis = 0;
+      a3_time_to_trigger = 480;
+      rsrq_config = 4;
+    };
+  }
+  // Add here more cells
+);