amarisoft_enb: add handling of num_cells modifier
the num_cells modifier allows to create multiple cells in a single enb
both cells are by default configured for CA
Change-Id: Ie9f16ce06ee56002c01097f2d338278f09ea4337
diff --git a/src/osmo_gsm_tester/amarisoft_enb.py b/src/osmo_gsm_tester/amarisoft_enb.py
index e4f3d64..374393a 100644
--- a/src/osmo_gsm_tester/amarisoft_enb.py
+++ b/src/osmo_gsm_tester/amarisoft_enb.py
@@ -175,7 +175,6 @@
+ ',tx_port1=tcp://' + self.addr() + ':2002' \
+ ',rx_port0=tcp://' + self.ue.addr() + ':2001' \
+ ',rx_port1=tcp://' + self.ue.addr() + ':2003' \
- + ',tx_freq=2630e6,rx_freq=2510e6,tx_freq2=2650e6,rx_freq2=2530e6' \
+ ',id=enb,base_srate=' + str(base_srate)
config.overlay(values, dict(enb=dict(sample_rate = base_srate / (1000*1000),
rf_dev_args=rf_dev_args)))
diff --git a/src/osmo_gsm_tester/templates/amarisoft_enb.cfg.tmpl b/src/osmo_gsm_tester/templates/amarisoft_enb.cfg.tmpl
index 532472a..763af08 100644
--- a/src/osmo_gsm_tester/templates/amarisoft_enb.cfg.tmpl
+++ b/src/osmo_gsm_tester/templates/amarisoft_enb.cfg.tmpl
@@ -56,31 +56,44 @@
/* list of cells */
cell_list: [
{
+ // First cell
+ dl_earfcn: 2850,
+ rf_port: 0,
+ cell_id: 0x01,
+ n_id_cell: 1,
+ tac: 0x0001,
+ root_sequence_index: 204, /* PRACH root sequence index */
+
+% if enb.get('num_cells') == '2':
+ scell_list: [
+ { cell_id: 0x02, cross_carrier_scheduling: false, scheduling_cell_id: 0x01, ul_allowed: true},
+ ],
+% endif
+ },
+% if enb.get('num_cells') == '2':
+ {
+ // Second Cell
+ dl_earfcn: 3050,
+ rf_port: 1,
+ cell_id: 0x02,
+ n_id_cell: 2,
+ tac: 0x0001,
+ root_sequence_index: 205,
+
+ scell_list: [
+ { cell_id: 0x01, cross_carrier_scheduling: false, scheduling_cell_id: 0x02, ul_allowed: true},
+ ],
+ },
+% endif
+ ], /* cell_list */
+
+ /* default cell parameters */
+ cell_default: {
/* Broadcasted PLMN identities */
plmn_list: [
"${enb.mcc}${enb.mnc}",
],
- //dl_earfcn: 300, /* DL center frequency: 2132 MHz (Band 1) */
- //dl_earfcn: 900, /* DL center frequency: 1960 MHz (Band 2) */
- //dl_earfcn: 1575, /* DL center frequency: 1842.5 MHz (Band 3) */
- //dl_earfcn: 2150, /* DL center frequency: 2130 MHz (Band 4) */
- //dl_earfcn: 2525, /* DL center frequency: 881.5 MHz (Band 5) */
- dl_earfcn: 2850, /* DL center frequency: 2680 MHz (Band 7) */
- //dl_earfcn: 6300, /* 806 MHz (Band 20) */
- //dl_earfcn: 38050, /* 2600 MHz (band 38) */
- //dl_earfcn: 40620, /* 2593 MHz (band 41) */
- //dl_earfcn: 42590, /* 3500 MHz (band 42) */
-
- n_id_cell: 1,
- cell_id: 0x01,
- tac: 0x0001,
- root_sequence_index: 204, /* PRACH root sequence index */
- },
- ], /* cell_list */
-
- /* default cell parameters */
- cell_default: {
n_antenna_dl: 1, /* number of DL antennas */
n_antenna_ul: 1, /* number of UL antennas */
n_rb_dl: ${enb.num_prb}, /* Bandwidth: 25: 5 MHz, 50: 10 MHz, 75: 15 MHz, 100: 20 MHz */
@@ -144,6 +157,28 @@
m_ri = 0 (default) disables RI reporting. */
// m_ri: 8,
+ pucch_dedicated: {
+ /* ack/nack feedback mode when carrier aggregation is
+ enabled. It can be "cs" (for at most two scells) or "pucch3"
+ (used in all cases if more than two cells). */
+ ack_nack_feedback_mode_ca: "cs",
+
+ /* TDD ack/nack feedback mode when a rel 10 UE is detected. It
+ can be "bundling", "multiplexing", "cs" or "pucch3". By
+ default is it the same as tdd_ack_nack_feedback_mode. */
+ // tdd_ack_nack_feedback_mode_r10: "cs",
+
+ /* number of PUCCH 1b CS resources. It determines
+ the maximum number of UEs that can be scheduled in one TTI
+ using carrier aggregation with PUCCH 1b CS ack/nack feedback. */
+ n1_pucch_an_cs_count: 1,
+
+ /* number of resource blocks for PUCCH 3. It determines
+ the maximum number of UEs that can be scheduled in one TTI
+ using carrier aggregation with PUCCH 3 ack/nack feedback. */
+ n3_pucch_an_n_rb: 0,
+ },
+
/* SRS dedicated config. All UEs share these
parameters. srs_config_index and freq_domain_position are
allocated for each UE) */