diff --git a/sysmocom/scenarios/mod-enb-cells-inter-freq-ho.conf b/sysmocom/scenarios/mod-enb-cells-inter-freq-ho.conf
new file mode 100644
index 0000000..5be32ae
--- /dev/null
+++ b/sysmocom/scenarios/mod-enb-cells-inter-freq-ho.conf
@@ -0,0 +1,29 @@
+# HO config for intra-frequency HO between two cells (same EARFCN) on different RF ports (srsENB)
+modifiers:
+  enb:
+  - cell_list:
+    - cell_id: 0x01
+      pci: 0x01
+      dl_earfcn: 2850
+      rf_port: 0
+      scell_list: []
+      ncell_list: [0x02]
+    - cell_id: 0x02
+      pci: 0x02
+      dl_earfcn: 3050
+      rf_port: 1
+      scell_list: []
+      ncell_list: [0x01]
+  - cell_list:
+    - cell_id: 0x01
+      pci: 0x01
+      dl_earfcn: 2850
+      rf_port: 0
+      scell_list: []
+      ncell_list: [0x02]
+    - cell_id: 0x02
+      pci: 0x02
+      dl_earfcn: 3050
+      rf_port: 1
+      scell_list: []
+      ncell_list: [0x01]
diff --git a/sysmocom/scenarios/suite-4g2enb@.conf b/sysmocom/scenarios/suite-4g2enb@.conf
new file mode 100644
index 0000000..2d1def4
--- /dev/null
+++ b/sysmocom/scenarios/suite-4g2enb@.conf
@@ -0,0 +1,6 @@
+config:
+  suite:
+    4g2enb:
+      handover:
+        duration: ${param1}
+        threshold: ${param2}
diff --git a/sysmocom/suites/4g2enb/handover.py b/sysmocom/suites/4g2enb/handover.py
new file mode 100755
index 0000000..8bfb585
--- /dev/null
+++ b/sysmocom/suites/4g2enb/handover.py
@@ -0,0 +1,78 @@
+#!/usr/bin/env python3
+from osmo_gsm_tester.testenv import *
+
+import time
+
+test_config = tenv.config_test_specific()
+duration = int(test_config.get('duration', 0)) # 0 = one HO loop
+threshold = int(test_config.get('threshold', 2))
+
+import pprint
+print("TEST_CONFIG:\n" + pprint.pformat(test_config))
+
+# attenuation from 0 to 10, then back to 0
+cell1_att_li = list(range(0, 11, 1)) + list(range(9, -1, -1))
+# attenuation from 10 to 0, then back to 10
+cell2_att_li = list(range(10, 0, -1)) + list(range(0, 11, 1))
+
+def do_one_ho_loop(rfemu_cell1, rfemu_cell2):
+    step = 0
+    while step < len(cell1_att_li):
+        rfemu_cell1.set_attenuation(cell1_att_li[step])
+        rfemu_cell2.set_attenuation(cell2_att_li[step])
+        step += 1
+        sleep(1)
+
+epc = tenv.epc()
+enb = tenv.enb()
+ue = tenv.modem()
+iperf3srv = tenv.iperf3srv({'addr': epc.tun_addr()})
+iperf3srv.set_run_node(epc.run_node())
+iperf3cli = iperf3srv.create_client()
+iperf3cli.set_run_node(ue.run_node())
+
+epc.subscriber_add(ue)
+epc.start()
+enb.ue_add(ue)
+enb.start(epc)
+
+print('waiting for ENB to connect to EPC...')
+wait(epc.enb_is_connected, enb)
+print('ENB is connected to EPC')
+
+ue.connect(enb)
+
+iperf3srv.start()
+proc = iperf3cli.prepare_test_proc(iperf3cli.DIR_UL, ue.netns(), duration + 30)
+
+print('waiting for UE to attach...')
+wait(ue.is_registered)
+print('UE is attached')
+
+rfemu_cell1 = enb.get_rfemu(0)
+rfemu_cell2 = enb.get_rfemu(1)
+
+print('Iterating for %d seconds to produce at least %d handovers...' % (duration, threshold))
+try:
+    proc.launch()
+    t_end = time.time() + duration
+    if duration == 0:
+        t_end += 1 # allow loop to run once
+    while time.time() < t_end:
+        do_one_ho_loop(rfemu_cell1, rfemu_cell2)
+    num_handovers = ue.get_counter('handover_success')
+    if num_handovers < threshold:
+        raise Exception('Wrong number of handovers %d < threshold %d during %d seconds' % (num_handovers, threshold, duration))
+except Exception as e:
+    try:
+        proc.terminate() # make sure we always terminate the process
+    except Exception:
+            print("Exception while terminating process %r" % repr(process))
+    raise e
+
+res_str = 'Got %d successful handovers (>= %d) during %d seconds' % (num_handovers, threshold, duration)
+print(res_str)
+test.set_report_stdout(res_str)
+proc.terminate()
+proc.wait()
+print("Done")
diff --git a/sysmocom/suites/4g2enb/ping.py b/sysmocom/suites/4g2enb/ping.py
new file mode 100755
index 0000000..e80b5f1
--- /dev/null
+++ b/sysmocom/suites/4g2enb/ping.py
@@ -0,0 +1,29 @@
+#!/usr/bin/env python3
+from osmo_gsm_tester.testenv import *
+
+epc = tenv.epc()
+enbA = tenv.enb()
+enbB = tenv.enb()
+ue = tenv.modem()
+
+epc.subscriber_add(ue)
+epc.start()
+enbA.ue_add(ue)
+enbB.ue_add(ue)
+enbA.start(epc)
+enbB.start(epc)
+
+print('waiting for ENBs to connect to EPC...')
+wait(epc.enb_is_connected, enbA)
+wait(epc.enb_is_connected, enbB)
+print('ENBs is connected to EPC')
+
+ue.connect(enbA)
+print('waiting for UE to attach...')
+wait(ue.is_registered)
+print('UE is attached')
+
+proc = ue.run_netns_wait('ping', ('ping', '-c', '10', epc.tun_addr()))
+output = proc.get_stdout()
+print(output)
+test.set_report_stdout(output)
diff --git a/sysmocom/suites/4g2enb/suite.conf b/sysmocom/suites/4g2enb/suite.conf
new file mode 100644
index 0000000..69dd252
--- /dev/null
+++ b/sysmocom/suites/4g2enb/suite.conf
@@ -0,0 +1,27 @@
+resources:
+  run_node: # for EPC
+  - times: 1
+  enb:
+  - times: 2
+  modem:
+  - times: 1
+    features:
+    - 4g
+
+modifiers:
+  enb:
+  - num_prb: 6
+    enable_measurements: true
+    cell_list:
+    - dl_rfemu:
+        type: gnuradio_zmq
+  - num_prb: 6
+    enable_measurements: true
+    cell_list:
+    - dl_rfemu:
+        type: gnuradio_zmq
+
+schema:
+  handover:
+        duration: 'duration'
+        threshold: 'uint'