diff --git a/suites/smpp/esme_connect_policy_acceptall.py b/suites/smpp/esme_connect_policy_acceptall.py
new file mode 100755
index 0000000..d22703d
--- /dev/null
+++ b/suites/smpp/esme_connect_policy_acceptall.py
@@ -0,0 +1,32 @@
+#!/usr/bin/env python3
+
+# This test checks following use-cases while in 'accept-all' policy:
+# * SMPP interface of SMSC accepts SMPP clients (ESMEs) which do not appear on
+#   the config file
+
+from osmo_gsm_tester.test import *
+
+nitb = suite.nitb()
+smsc = nitb.smsc
+esme = suite.esme()
+
+# Here we deliberately omit calling smsc.esme_add() to avoid having it included
+# in the smsc config.
+smsc.set_smsc_policy(smsc.SMSC_POLICY_ACCEPT_ALL)
+esme.set_smsc(smsc)
+
+nitb.start()
+
+# Due to accept-all policy, connect() should work even if we didn't previously
+# configure the esme in the smsc, no matter the system_id / password we use.
+log('Test connect with non-empty values in system_id and password')
+esme.set_system_id('foo')
+esme.set_password('bar')
+esme.connect()
+esme.disconnect()
+
+log('Test connect with empty values in system_id and password')
+esme.set_system_id('')
+esme.set_password('')
+esme.connect()
+esme.disconnect()
diff --git a/suites/smpp/esme_connect_policy_closed.py b/suites/smpp/esme_connect_policy_closed.py
new file mode 100755
index 0000000..7fac276
--- /dev/null
+++ b/suites/smpp/esme_connect_policy_closed.py
@@ -0,0 +1,51 @@
+#!/usr/bin/env python3
+
+# This test checks following use-cases while in 'closed' policy:
+# * SMPP interface of SMSC accepts SMPP clients (ESMEs) with password previously
+#   defined in its configuration file.
+# * SMPP interface of SMSC rejects ESMEs with known system id but wrong password.
+# * SMPP interface of SMSC rejects ESEMs with unknown system id
+
+from osmo_gsm_tester.test import *
+
+SMPP_ESME_RINVPASWD = 0x0000000E
+SMPP_ESME_RINVSYSID = 0x0000000F
+
+nitb = suite.nitb()
+smsc = nitb.smsc
+esme = suite.esme()
+esme_no_pwd = suite.esme()
+esme_no_pwd.set_password('')
+
+smsc.set_smsc_policy(smsc.SMSC_POLICY_CLOSED)
+smsc.esme_add(esme)
+smsc.esme_add(esme_no_pwd)
+
+nitb.start()
+
+log('Test with correct credentials (no password)')
+esme_no_pwd.connect()
+esme_no_pwd.disconnect()
+
+log('Test with correct credentials (no password, non empty)')
+esme_no_pwd.set_password('foobar')
+esme_no_pwd.connect()
+esme_no_pwd.disconnect()
+
+log('Test with correct credentials')
+esme.connect()
+esme.disconnect()
+
+log('Test with bad password, checking for failure')
+correct_password = esme.password
+new_password = 'barfoo' if correct_password == 'foobar' else 'foobar'
+esme.set_password(new_password)
+esme.run_method_expect_failure(SMPP_ESME_RINVPASWD, esme.connect)
+esme.set_password(correct_password)
+
+log('Test with bad system_id, checking for failure')
+correct_system_id = esme.system_id
+new_system_id = 'barfoo' if correct_system_id == 'foobar' else 'foobar'
+esme.set_system_id(new_system_id)
+esme.run_method_expect_failure(SMPP_ESME_RINVSYSID, esme.connect)
+esme.set_system_id(correct_system_id)
diff --git a/suites/smpp/esme_ms_sms.py b/suites/smpp/esme_ms_sms.py
new file mode 100755
index 0000000..bc9d7d4
--- /dev/null
+++ b/suites/smpp/esme_ms_sms.py
@@ -0,0 +1,49 @@
+#!/usr/bin/env python3
+
+# This test checks following use-cases:
+# * SMPP interface of SMSC accepts SMPP clients (ESMEs) with password previously
+#   defined in its configuration file.
+# * ESME can send an SMS to an already registered MS when SMSC is in 'forward' mode.
+
+from osmo_gsm_tester.test import *
+
+SMPP_ESME_RINVDSTADR = 0x0000000B
+
+nitb = suite.nitb()
+bts = suite.bts()
+ms = suite.modem()
+esme = suite.esme()
+
+print('start nitb and bts...')
+nitb.bts_add(bts)
+nitb.smsc.esme_add(esme)
+nitb.start()
+bts.start()
+
+esme.connect()
+nitb.subscriber_add(ms)
+ms.connect(nitb.mcc_mnc())
+
+ms.log_info()
+print('waiting for modem to attach...')
+wait(ms.is_connected, nitb.mcc_mnc())
+wait(nitb.subscriber_attached, ms)
+
+print('sending first sms...')
+msg = Sms(esme.msisdn, ms.msisdn, 'smpp send message')
+esme.sms_send(msg)
+wait(ms.sms_was_received, msg)
+
+print('sending second sms (unicode chars not in gsm aplhabet)...')
+msg = Sms(esme.msisdn, ms.msisdn, 'chars:[кизаçйж]')
+esme.sms_send(msg)
+wait(ms.sms_was_received, msg)
+
+
+# FIXME: This test is not failing with error but succeeds, need to check why: (forward vs store policy?)
+# wrong_msisdn = ms.msisdn + esme.msisdn
+# print('sending third sms (with wrong msisdn %s)' % wrong_msisdn)
+# msg = Sms(esme.msisdn, wrong_msisdn, 'smpp message with wrong dest')
+# esme.run_method_expect_failure(SMPP_ESME_RINVDSTADR, esme.sms_send, msg)
+
+esme.disconnect()
diff --git a/suites/smpp/suite.conf b/suites/smpp/suite.conf
new file mode 100644
index 0000000..eb59abb
--- /dev/null
+++ b/suites/smpp/suite.conf
@@ -0,0 +1,10 @@
+resources:
+  ip_address:
+  - times: 1
+  bts:
+  - times: 1
+  modem:
+  - times: 1
+
+defaults:
+  timeout: 60s