diff --git a/config.guess b/config.guess
new file mode 100755
index 0000000..0ce538b
--- /dev/null
+++ b/config.guess
@@ -0,0 +1,1183 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+#   Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# Please send patches to <config-patches@gnu.org>.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+# Use $HOST_CC if defined. $CC may point to a cross-compiler
+if test x"$CC_FOR_BUILD" = x; then
+  if test x"$HOST_CC" != x; then
+    CC_FOR_BUILD="$HOST_CC"
+  else
+    if test x"$CC" != x; then
+      CC_FOR_BUILD="$CC"
+    else
+      CC_FOR_BUILD=cc
+    fi
+  fi
+fi
+
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+dummy=dummy-$$
+trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# Netbsd (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	# Determine the machine/vendor (is the vendor relevant).
+	case "${UNAME_MACHINE}" in
+	    amiga) machine=m68k-cbm ;;
+	    arm32) machine=arm-unknown ;;
+	    atari*) machine=m68k-atari ;;
+	    sun3*) machine=m68k-sun ;;
+	    mac68k) machine=m68k-apple ;;
+	    macppc) machine=powerpc-apple ;;
+	    hp3[0-9][05]) machine=m68k-hp ;;
+	    ibmrt|romp-ibm) machine=romp-ibm ;;
+	    *) machine=${UNAME_MACHINE}-unknown ;;
+	esac
+	# The Operating System including object format.
+	if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep __ELF__ >/dev/null
+	then
+	    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+	    # Return netbsd for either.  FIX?
+	    os=netbsd
+	else
+	    os=netbsdelf
+	fi
+	# The OS release
+	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit 0 ;;
+    alpha:OSF1:*:*)
+	if test $UNAME_RELEASE = "V4.0"; then
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+	fi
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	cat <<EOF >$dummy.s
+	.data
+\$Lformat:
+	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+
+	.text
+	.globl main
+	.align 4
+	.ent main
+main:
+	.frame \$30,16,\$26,0
+	ldgp \$29,0(\$27)
+	.prologue 1
+	.long 0x47e03d80 # implver \$0
+	lda \$2,-1
+	.long 0x47e20c21 # amask \$2,\$1
+	lda \$16,\$Lformat
+	mov \$0,\$17
+	not \$1,\$18
+	jsr \$26,printf
+	ldgp \$29,0(\$26)
+	mov 0,\$16
+	jsr \$26,exit
+	.end main
+EOF
+	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+	if test "$?" = 0 ; then
+		case `./$dummy` in
+			0-0)
+				UNAME_MACHINE="alpha"
+				;;
+			1-0)
+				UNAME_MACHINE="alphaev5"
+				;;
+			1-1)
+				UNAME_MACHINE="alphaev56"
+				;;
+			1-101)
+				UNAME_MACHINE="alphapca56"
+				;;
+			2-303)
+				UNAME_MACHINE="alphaev6"
+				;;
+			2-307)
+				UNAME_MACHINE="alphaev67"
+				;;
+		esac
+	fi
+	rm -f $dummy.s $dummy
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit 0 ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit 0 ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit 0 ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-cbm-sysv4
+	exit 0;;
+    amiga:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit 0 ;;
+    arc64:OpenBSD:*:*)
+	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    arc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    hkmips:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    pmax:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    sgi:OpenBSD:*:*)
+	echo mips-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    wgrisc:OpenBSD:*:*)
+	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit 0 ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit 0;;
+    SR2?01:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit 0;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit 0 ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit 0 ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit 0 ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit 0 ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit 0 ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit 0 ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit 0 ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit 0 ;;
+    sun3*:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mac68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme68k:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    mvme88k:OpenBSD:*:*)
+	echo m88k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit 0 ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit 0 ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit 0 ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit 0 ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy \
+	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+	  && rm $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit 0 ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit 0 ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit 0 ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit 0 ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit 0 ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit 0 ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit 0 ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit 0 ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit 0 ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit 0 ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+    i?86:AIX:*:*)
+	echo i386-ibm-aix
+	exit 0 ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+		rm -f $dummy.c $dummy
+		echo rs6000-ibm-aix3.2.5
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit 0 ;;
+    *:AIX:*:4)
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=4.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit 0 ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit 0 ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit 0 ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit 0 ;;                           # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit 0 ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit 0 ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit 0 ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit 0 ;;
+    9000/[34678]??:HP-UX:*:*)
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+              sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+	rm -f $dummy.c $dummy
+	esac
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit 0 ;;
+    3050*:HI-UX:*:*)
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+	rm -f $dummy.c $dummy
+	echo unknown-hitachi-hiuxwe2
+	exit 0 ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit 0 ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit 0 ;;
+    *9??*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit 0 ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit 0 ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit 0 ;;
+    i?86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit 0 ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit 0 ;;
+    hppa*:OpenBSD:*:*)
+	echo hppa-unknown-openbsd
+	exit 0 ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit 0 ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit 0 ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit 0 ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit 0 ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit 0 ;;
+    CRAY*X-MP:*:*:*)
+	echo xmp-cray-unicos
+        exit 0 ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE}
+	exit 0 ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+	exit 0 ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*T3E:*:*:*)
+	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit 0 ;;
+    CRAY-2:*:*:*)
+	echo cray2-cray-unicos
+        exit 0 ;;
+    F300:UNIX_System_V:*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit 0 ;;
+    F301:UNIX_System_V:*:*)
+       echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+       exit 0 ;;
+    hp300:OpenBSD:*:*)
+	echo m68k-unknown-openbsd${UNAME_RELEASE}
+	exit 0 ;;
+    i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit 0 ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit 0 ;;
+    *:OpenBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+	exit 0 ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit 0 ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit 0 ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i386-pc-interix
+	exit 0 ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit 0 ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit 0 ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit 0 ;;
+    *:GNU:*:*)
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit 0 ;;
+    *:Linux:*:*)
+
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	ld_help_string=`cd /; ld --help 2>&1`
+	ld_supported_emulations=`echo $ld_help_string \
+			 | sed -ne '/supported emulations:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported emulations: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_emulations" in
+	  *ia64)
+		echo "${UNAME_MACHINE}-unknown-linux"
+		exit 0
+		;;
+	  i?86linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit 0
+		;;
+	  elf_i?86)
+		echo "${UNAME_MACHINE}-pc-linux"
+		exit 0
+		;;
+	  i?86coff)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit 0
+		;;
+	  sparclinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  armlinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32arm*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuoldld"
+		exit 0
+		;;
+	  armelf_linux*)
+		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+		exit 0
+		;;
+	  m68klinux)
+		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+		exit 0
+		;;
+	  elf32ppc | elf32ppclinux)
+		# Determine Lib Version
+		cat >$dummy.c <<EOF
+#include <features.h>
+#if defined(__GLIBC__)
+extern char __libc_version[];
+extern char __libc_release[];
+#endif
+main(argc, argv)
+     int argc;
+     char *argv[];
+{
+#if defined(__GLIBC__)
+  printf("%s %s\n", __libc_version, __libc_release);
+#else
+  printf("unkown\n");
+#endif
+  return 0;
+}
+EOF
+		LIBC=""
+		$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+		if test "$?" = 0 ; then
+			./$dummy | grep 1\.99 > /dev/null
+			if test "$?" = 0 ; then
+				LIBC="libc1"
+			fi
+		fi
+		rm -f $dummy.c $dummy
+		echo powerpc-unknown-linux-gnu${LIBC}
+		exit 0
+		;;
+	esac
+
+	if test "${UNAME_MACHINE}" = "alpha" ; then
+		cat <<EOF >$dummy.s
+			.data
+		\$Lformat:
+			.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+
+			.text
+			.globl main
+			.align 4
+			.ent main
+		main:
+			.frame \$30,16,\$26,0
+			ldgp \$29,0(\$27)
+			.prologue 1
+			.long 0x47e03d80 # implver \$0
+			lda \$2,-1
+			.long 0x47e20c21 # amask \$2,\$1
+			lda \$16,\$Lformat
+			mov \$0,\$17
+			not \$1,\$18
+			jsr \$26,printf
+			ldgp \$29,0(\$26)
+			mov 0,\$16
+			jsr \$26,exit
+			.end main
+EOF
+		LIBC=""
+		$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+		if test "$?" = 0 ; then
+			case `./$dummy` in
+			0-0)
+				UNAME_MACHINE="alpha"
+				;;
+			1-0)
+				UNAME_MACHINE="alphaev5"
+				;;
+			1-1)
+				UNAME_MACHINE="alphaev56"
+				;;
+			1-101)
+				UNAME_MACHINE="alphapca56"
+				;;
+			2-303)
+				UNAME_MACHINE="alphaev6"
+				;;
+			2-307)
+				UNAME_MACHINE="alphaev67"
+				;;
+			esac
+
+			objdump --private-headers $dummy | \
+			  grep ld.so.1 > /dev/null
+			if test "$?" = 0 ; then
+				LIBC="libc1"
+			fi
+		fi
+		rm -f $dummy.s $dummy
+		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+	elif test "${UNAME_MACHINE}" = "mips" ; then
+	  cat >$dummy.c <<EOF
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __MIPSEB__
+  printf ("%s-unknown-linux-gnu\n", argv[1]);
+#endif
+#ifdef __MIPSEL__
+  printf ("%sel-unknown-linux-gnu\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+	  rm -f $dummy.c $dummy
+	elif test "${UNAME_MACHINE}" = "s390"; then
+	  echo s390-ibm-linux && exit 0
+	else
+	  # Either a pre-BFD a.out linker (linux-gnuoldld)
+	  # or one that does not give us useful --help.
+	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+	  # If ld does not provide *any* "supported emulations:"
+	  # that means it is gnuoldld.
+	  echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
+	  test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+	  case "${UNAME_MACHINE}" in
+	  i?86)
+	    VENDOR=pc;
+	    ;;
+	  *)
+	    VENDOR=unknown;
+	    ;;
+	  esac
+	  # Determine whether the default compiler is a.out or elf
+	  cat >$dummy.c <<EOF
+#include <features.h>
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+#ifdef __ELF__
+# ifdef __GLIBC__
+#  if __GLIBC__ >= 2
+    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+#  else
+    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+#  endif
+# else
+   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+  return 0;
+}
+EOF
+	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+	  rm -f $dummy.c $dummy
+	fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+    i?86:DYNIX/ptx:4*:*)
+	echo i386-sequent-sysv4
+	exit 0 ;;
+    i?86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit 0 ;;
+    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit 0 ;;
+    i?86:*:5:7*)
+        # Fixed at (any) Pentium or better
+        UNAME_MACHINE=i586
+        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+	else
+	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+	fi
+	exit 0 ;;
+    i?86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit 0 ;;
+    i?86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit 0 ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit 0 ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit 0 ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit 0 ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit 0 ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit 0 ;;
+    M68*:*:R3V[567]*:*)
+	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+    3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && echo i486-ncr-sysv4 && exit 0 ;;
+    m68*:LynxOS:2.*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit 0 ;;
+    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit 0 ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit 0 ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit 0 ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit 0 ;;
+    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                           # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit 0 ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit 0 ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit 0 ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit 0 ;;
+    news*:NEWS-OS:*:6*)
+	echo mips-sony-newsos6
+	exit 0 ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit 0 ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit 0 ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit 0 ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit 0 ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit 0 ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit 0 ;;
+    *:Darwin:*:*)
+	echo `uname -p`-apple-darwin${UNAME_RELEASE}
+	exit 0 ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	if test "${UNAME_MACHINE}" = "x86pc"; then
+		UNAME_MACHINE=pc
+	fi
+	echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+	exit 0 ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit 0 ;;
+    NSR-W:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit 0 ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit 0 ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+  printf ("vax-dec-bsd\n"); exit (0);
+#else
+  printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+rm -f $dummy.c $dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit 0 ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit 0 ;;
+    c34*)
+	echo c34-convex-bsd
+	exit 0 ;;
+    c38*)
+	echo c38-convex-bsd
+	exit 0 ;;
+    c4*)
+	echo c4-convex-bsd
+	exit 0 ;;
+    esac
+fi
+
+#echo '(Unable to guess system type)' 1>&2
+
+exit 1
diff --git a/config.sub b/config.sub
new file mode 100755
index 0000000..c8e7785
--- /dev/null
+++ b/config.sub
@@ -0,0 +1,1268 @@
+#! /bin/sh
+# Configuration validation subroutine script, version 1.1.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
+#   Free Software Foundation, Inc.
+#
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner <bothner@cygnus.com>.
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+if [ x$1 = x ]
+then
+	echo Configuration name missing. 1>&2
+	echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+	echo "or     $0 ALIAS" 1>&2
+	echo where ALIAS is a recognized configuration type. 1>&2
+	exit 1
+fi
+
+# First pass through any local machine types.
+case $1 in
+	*local*)
+		echo $1
+		exit 0
+		;;
+	*)
+	;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
+		| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
+		| 580 | i960 | h8300 \
+		| x86 | ppcbe | mipsbe | mipsle | shbe | shle | armbe | armle \
+		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+		| hppa64 \
+		| alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+		| alphaev6[78] \
+		| we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
+		| 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
+		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
+		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+		| mips64vr5000 | miprs64vr5000el | mcore \
+		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+		| thumb | d10v | fr30 | avr)
+		basic_machine=$basic_machine-unknown
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i[34567]86)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	# FIXME: clean up the formatting here.
+	vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
+	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+	      | xmp-* | ymp-* \
+	      | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* | armbe-* | armle-* \
+	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+	      | hppa2.0n-* | hppa64-* \
+	      | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+	      | alphaev6[78]-* \
+	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+	      | clipper-* | orion-* \
+	      | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+	      | mips64el-* | mips64orion-* | mips64orionel-* \
+	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+	      | mipstx39-* | mipstx39el-* | mcore-* \
+	      | f301-* | armv*-* | s390-* | sv1-* | t3e-* \
+	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+	      | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* \
+	      | bs2000-*)
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-cbm
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-cbm
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-cbm
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	cray2)
+		basic_machine=cray2-cray
+		os=-unicos
+		;;
+	[ctj]90-cray)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i[34567]86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i[34567]86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i[34567]86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i[34567]86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	i386-go32 | go32)
+		basic_machine=i386-unknown
+		os=-go32
+		;;
+	i386-mingw32 | mingw32)
+		basic_machine=i386-unknown
+		os=-mingw32
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mipsel*-linux*)
+		basic_machine=mipsel-unknown
+		os=-linux-gnu
+		;;
+	mips*-linux*)
+		basic_machine=mips-unknown
+		os=-linux-gnu
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	mmix*)
+		basic_machine=mmix-knuth
+		os=-mmixware
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	msdos)
+		basic_machine=i386-unknown
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+        pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5 | k5 | k6 | nexen)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexen-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=rs6000-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+	        ;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+	        ;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sparclite-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=t3e-cray
+		os=-unicos
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+               basic_machine=f301-fujitsu
+               ;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xmp)
+		basic_machine=xmp-cray
+		os=-unicos
+		;;
+        xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	mips)
+		if [ x$os = x-linux-gnu ]; then
+			basic_machine=mips-unknown
+		else
+			basic_machine=mips-mips
+		fi
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sparc | sparcv9)
+		basic_machine=sparc-sun
+		;;
+        cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	c4x*)
+		basic_machine=c4x-none
+		os=-coff
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i[34567]86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto*)
+		os=-nto-qnx
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-ns2 )
+	        os=-nextstep2
+		;;
+	-nsk)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+        -*mint | -*MiNT)
+	        os=-mint
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+        pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+        *-gould)
+		os=-sysv
+		;;
+        *-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+        *-sgi)
+		os=-irix
+		;;
+        *-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f301-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-vxsim* | -vxworks*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -*MiNT)
+				vendor=atari
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
diff --git a/doc/Makefile.in b/doc/Makefile.in
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/doc/Makefile.in
diff --git a/ltconfig b/ltconfig
new file mode 100755
index 0000000..c14d83c
--- /dev/null
+++ b/ltconfig
@@ -0,0 +1,3114 @@
+#! /bin/sh
+
+# ltconfig - Create a system-specific libtool.
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A lot of this script is taken from autoconf-2.10.
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+echo=echo
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# Find the correct PATH separator.  Usually this is `:', but
+# DJGPP uses `;' like DOS.
+if test "X${PATH_SEPARATOR+set}" != Xset; then
+  UNAME=${UNAME-`uname 2>/dev/null`}
+  case X$UNAME in
+    *-DOS) PATH_SEPARATOR=';' ;;
+    *)     PATH_SEPARATOR=':' ;;
+  esac
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+if test "X${echo_test_string+set}" != Xset; then
+  # find a string as large as possible, as long as the shell can cope with it
+  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+       echo_test_string="`eval $cmd`" &&
+       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
+      break
+    fi
+  done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
+   test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  for dir in $PATH /usr/ucb; do
+    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+       test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+       test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running ltconfig again with it.
+      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
+      export ORIGINAL_CONFIG_SHELL
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf "%s\n"'
+      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+	# Cool, printf works
+	:
+      elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+	   test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+	CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+	   test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+	echo="$CONFIG_SHELL $0 --fallback-echo"
+      else
+	# maybe with a smaller string...
+	prev=:
+
+	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+
+	if test "$prev" != 'sed 50q "$0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+      fi
+    fi
+  fi
+fi
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# The name of this program.
+progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
+
+# Constants:
+PROGRAM=ltconfig
+PACKAGE=libtool
+VERSION=1.3.5
+TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)"
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+rm="rm -f"
+
+help="Try \`$progname --help' for more information."
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+enable_shared=yes
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+enable_static=yes
+enable_fast_install=yes
+enable_dlopen=unknown
+enable_win32_dll=no
+ltmain=
+silent=
+srcdir=
+ac_config_guess=
+ac_config_sub=
+host=
+nonopt=
+ofile="$default_ofile"
+verify_host=yes
+with_gcc=no
+with_gnu_ld=no
+need_locks=yes
+ac_ext=c
+objext=o
+libext=a
+exeext=
+cache_file=
+
+old_AR="$AR"
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+old_CPPFLAGS="$CPPFLAGS"
+old_LDFLAGS="$LDFLAGS"
+old_LD="$LD"
+old_LN_S="$LN_S"
+old_LIBS="$LIBS"
+old_NM="$NM"
+old_RANLIB="$RANLIB"
+old_DLLTOOL="$DLLTOOL"
+old_OBJDUMP="$OBJDUMP"
+old_AS="$AS"
+
+# Parse the command line options.
+args=
+prev=
+for option
+do
+  case "$option" in
+  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    eval "$prev=\$option"
+    prev=
+    continue
+  fi
+
+  case "$option" in
+  --help) cat <<EOM
+Usage: $progname [OPTION]... [HOST [LTMAIN]]
+
+Generate a system-specific libtool script.
+
+    --debug                enable verbose shell tracing
+    --disable-shared       do not build shared libraries
+    --disable-static       do not build static libraries
+    --disable-fast-install do not optimize for fast installation
+    --enable-dlopen        enable dlopen support
+    --enable-win32-dll     enable building dlls on win32 hosts
+    --help                 display this help and exit
+    --no-verify            do not verify that HOST is a valid host type
+-o, --output=FILE          specify the output file [default=$default_ofile]
+    --quiet                same as \`--silent'
+    --silent               do not print informational messages
+    --srcdir=DIR           find \`config.guess' in DIR
+    --version              output version information and exit
+    --with-gcc             assume that the GNU C compiler will be used
+    --with-gnu-ld          assume that the C compiler uses the GNU linker
+    --disable-lock         disable file locking
+    --cache-file=FILE      configure cache file
+
+LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
+that provides basic libtool functionality.
+
+HOST is the canonical host system name [default=guessed].
+EOM
+  exit 0
+  ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --disable-shared) enable_shared=no ;;
+
+  --disable-static) enable_static=no ;;
+
+  --disable-fast-install) enable_fast_install=no ;;
+
+  --enable-dlopen) enable_dlopen=yes ;;
+
+  --enable-win32-dll) enable_win32_dll=yes ;;
+
+  --quiet | --silent) silent=yes ;;
+
+  --srcdir) prev=srcdir ;;
+  --srcdir=*) srcdir="$optarg" ;;
+
+  --no-verify) verify_host=no ;;
+
+  --output | -o) prev=ofile ;;
+  --output=*) ofile="$optarg" ;;
+
+  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
+
+  --with-gcc) with_gcc=yes ;;
+  --with-gnu-ld) with_gnu_ld=yes ;;
+
+  --disable-lock) need_locks=no ;;
+
+  --cache-file=*) cache_file="$optarg" ;;
+
+  -*)
+    echo "$progname: unrecognized option \`$option'" 1>&2
+    echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    if test -z "$ltmain"; then
+      ltmain="$option"
+    elif test -z "$host"; then
+# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
+#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
+#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
+#      fi
+      host="$option"
+    else
+      echo "$progname: too many arguments" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+done
+
+if test -z "$ltmain"; then
+  echo "$progname: you must specify a LTMAIN file" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+if test ! -f "$ltmain"; then
+  echo "$progname: \`$ltmain' does not exist" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+# Quote any args containing shell metacharacters.
+ltconfig_args=
+for arg
+do
+  case "$arg" in
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ltconfig_args="$ltconfig_args '$arg'" ;;
+  *) ltconfig_args="$ltconfig_args $arg" ;;
+  esac
+done
+
+# A relevant subset of AC_INIT.
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 5 compiler messages saved in config.log
+# 6 checking for... messages and results
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>>./config.log
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
+if test "X${LANG+set}"   = Xset; then LANG=C;   export LANG;   fi
+
+if test -n "$cache_file" && test -r "$cache_file"; then
+  echo "loading cache $cache_file within ltconfig"
+  . $cache_file
+fi
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+if test -z "$srcdir"; then
+  # Assume the source directory is the same one as the path to LTMAIN.
+  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
+  test "$srcdir" = "$ltmain" && srcdir=.
+fi
+
+trap "$rm conftest*; exit 1" 1 2 15
+if test "$verify_host" = yes; then
+  # Check for config.guess and config.sub.
+  ac_aux_dir=
+  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+    if test -f $ac_dir/config.guess; then
+      ac_aux_dir=$ac_dir
+      break
+    fi
+  done
+  if test -z "$ac_aux_dir"; then
+    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+  ac_config_guess=$ac_aux_dir/config.guess
+  ac_config_sub=$ac_aux_dir/config.sub
+
+  # Make sure we can run config.sub.
+  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
+  else
+    echo "$progname: cannot run $ac_config_sub" 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+
+  echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+  host_alias=$host
+  case "$host_alias" in
+  "")
+    if host_alias=`$SHELL $ac_config_guess`; then :
+    else
+      echo "$progname: cannot guess host type; you must specify one" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+  host=`$SHELL $ac_config_sub $host_alias`
+  echo "$ac_t$host" 1>&6
+
+  # Make sure the host verified.
+  test -z "$host" && exit 1
+
+elif test -z "$host"; then
+  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
+  echo "$help" 1>&2
+  exit 1
+else
+  host_alias=$host
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case "$host_os" in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+case "$host_os" in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR cru $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+# Set a sane default for `AR'.
+test -z "$AR" && AR=ar
+
+# Set a sane default for `OBJDUMP'.
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+# If RANLIB is not set, then run the test.
+if test "${RANLIB+set}" != "set"; then
+  result=no
+
+  echo $ac_n "checking for ranlib... $ac_c" 1>&6
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+  for dir in $PATH; do
+    test -z "$dir" && dir=.
+    if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
+      RANLIB="ranlib"
+      result="ranlib"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  echo "$ac_t$result" 1>&6
+fi
+
+if test -n "$RANLIB"; then
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+fi
+
+# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$AS" && AS=as
+
+# Check to see if we are using GCC.
+if test "$with_gcc" != yes || test -z "$CC"; then
+  # If CC is not set, then try to find GCC or a usable CC.
+  if test -z "$CC"; then
+    echo $ac_n "checking for gcc... $ac_c" 1>&6
+    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for dir in $PATH; do
+      test -z "$dir" && dir=.
+      if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
+	CC="gcc"
+	break
+      fi
+    done
+    IFS="$save_ifs"
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+  fi
+
+  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
+  if test -z "$CC"; then
+    echo $ac_n "checking for cc... $ac_c" 1>&6
+    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    cc_rejected=no
+    for dir in $PATH; do
+      test -z "$dir" && dir=.
+      if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
+	if test "$dir/cc" = "/usr/ucb/cc"; then
+	  cc_rejected=yes
+	  continue
+	fi
+	CC="cc"
+	break
+      fi
+    done
+    IFS="$save_ifs"
+    if test $cc_rejected = yes; then
+      # We found a bogon in the path, so make sure we never use it.
+      set dummy $CC
+      shift
+      if test $# -gt 0; then
+	# We chose a different compiler from the bogus one.
+	# However, it has the same name, so the bogon will be chosen
+	# first if we set CC to just the name; use the full file name.
+	shift
+	set dummy "$dir/cc" "$@"
+	shift
+	CC="$@"
+      fi
+    fi
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+
+    if test -z "$CC"; then
+      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
+      exit 1
+    fi
+  fi
+
+  # Now see if the compiler is really GCC.
+  with_gcc=no
+  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
+  echo "$progname:581: checking whether we are using GNU C" >&5
+
+  $rm conftest.c
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+    with_gcc=yes
+  fi
+  $rm conftest.c
+  echo "$ac_t$with_gcc" 1>&6
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+echo $ac_n "checking for object suffix... $ac_c" 1>&6
+$rm conftest*
+echo 'int i = 1;' > conftest.c
+echo "$progname:603: checking for object suffix" >& 5
+if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+  # Append any warnings to the config.log.
+  cat conftest.err 1>&5
+
+  for ac_file in conftest.*; do
+    case $ac_file in
+    *.c) ;;
+    *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
+    esac
+  done
+else
+  cat conftest.err 1>&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.c >&5
+fi
+$rm conftest*
+echo "$ac_t$objext" 1>&6
+
+echo $ac_n "checking for executable suffix... $ac_c" 1>&6
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_exeext="no"
+  $rm conftest*
+  echo 'main () { return 0; }' > conftest.c
+  echo "$progname:629: checking for executable suffix" >& 5
+  if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then
+    # Append any warnings to the config.log.
+    cat conftest.err 1>&5
+
+    for ac_file in conftest.*; do
+      case $ac_file in
+      *.c | *.err | *.$objext ) ;;
+      *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;;
+      esac
+    done
+  else
+    cat conftest.err 1>&5
+    echo "$progname: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  $rm conftest*
+fi
+if test "X$ac_cv_exeext" = Xno; then
+  exeext=""
+else
+  exeext="$ac_cv_exeext"
+fi
+echo "$ac_t$ac_cv_exeext" 1>&6
+
+echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
+pic_flag=
+special_shlib_compile_flags=
+wl=
+link_static_flag=
+no_builtin_flag=
+
+if test "$with_gcc" = yes; then
+  wl='-Wl,'
+  link_static_flag='-static'
+
+  case "$host_os" in
+  beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+    # PIC is the default for these OSes.
+    ;;
+  aix*)
+    # Below there is a dirty hack to force normal static linking with -ldl
+    # The problem is because libdl dynamically linked with both libc and
+    # libC (AIX C++ library), which obviously doesn't included in libraries
+    # list by gcc. This cause undefined symbols with -static flags.
+    # This hack allows C programs to be linked with "-static -ldl", but
+    # we not sure about C++ programs.
+    link_static_flag="$link_static_flag ${wl}-lC"
+    ;;
+  cygwin* | mingw* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+  amigaos*)
+    # FIXME: we need at least 68020 code to build shared libraries, but
+    # adding the `-m68020' flag to GCC prevents building anything better,
+    # like `-m68040'.
+    pic_flag='-m68020 -resident32 -malways-restore-a4'
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec; then
+       pic_flag=-Kconform_pic
+    fi
+    ;;
+  *)
+    pic_flag='-fPIC'
+    ;;
+  esac
+else
+  # PORTME Check for PIC flags for the system compiler.
+  case "$host_os" in
+  aix3* | aix4*)
+    # All AIX code is PIC.
+    link_static_flag='-bnso -bI:/lib/syscalls.exp'
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    # Is there a better link_static_flag that works with the bundled CC?
+    wl='-Wl,'
+    link_static_flag="${wl}-a ${wl}archive"
+    pic_flag='+Z'
+    ;;
+
+  irix5* | irix6*)
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    # PIC (with -KPIC) is the default.
+    ;;
+
+  cygwin* | mingw* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+
+  osf3* | osf4* | osf5*)
+    # All OSF/1 code is PIC.
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    ;;
+
+  sco3.2v5*)
+    pic_flag='-Kpic'
+    link_static_flag='-dn'
+    special_shlib_compile_flags='-belf'
+    ;;
+
+  solaris*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  sunos4*)
+    pic_flag='-PIC'
+    link_static_flag='-Bstatic'
+    wl='-Qoption ld '
+    ;;
+
+  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  uts4*)
+    pic_flag='-pic'
+    link_static_flag='-Bstatic'
+    ;;
+  sysv4*MP*)
+    if test -d /usr/nec ;then
+      pic_flag='-Kconform_pic'
+      link_static_flag='-Bstatic'
+    fi
+    ;;
+  *)
+    can_build_shared=no
+    ;;
+  esac
+fi
+
+if test -n "$pic_flag"; then
+  echo "$ac_t$pic_flag" 1>&6
+
+  # Check to make sure the pic_flag actually works.
+  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS $pic_flag -DPIC"
+  echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5
+  if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+    # Append any warnings to the config.log.
+    cat conftest.err 1>&5
+    
+    case "$host_os" in
+    hpux9* | hpux10* | hpux11*)
+      # On HP-UX, both CC and GCC only warn that PIC is supported... then they
+      # create non-PIC objects.  So, if there were any warnings, we assume that
+      # PIC is not supported.
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	can_build_shared=no
+	pic_flag=
+      else
+	echo "$ac_t"yes 1>&6
+	pic_flag=" $pic_flag"
+      fi
+      ;;
+    *)
+      echo "$ac_t"yes 1>&6
+      pic_flag=" $pic_flag"
+      ;;
+    esac
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    can_build_shared=no
+    pic_flag=
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+else
+  echo "$ac_t"none 1>&6
+fi
+
+# Check to see if options -o and -c are simultaneously supported by compiler
+echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+$rm conftest*
+echo "int some_variable = 0;" > conftest.c
+mkdir out
+# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+# that will create temporary files in the current directory regardless of
+# the output directory.  Thus, making CWD read-only will cause this test
+# to fail, enabling locking or at least warning the user not to do parallel
+# builds.
+chmod -w .
+save_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -o out/conftest2.o"
+echo "$progname:829: checking if $compiler supports -c -o file.o" >&5
+if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
+
+  # The compiler can only warn and ignore the option if not recognized
+  # So say no if there are warnings
+    if test -s out/conftest.err; then
+      echo "$ac_t"no 1>&6
+      compiler_c_o=no
+    else
+      echo "$ac_t"yes 1>&6
+      compiler_c_o=yes
+    fi
+else
+  # Append any errors to the config.log.
+  cat out/conftest.err 1>&5
+  compiler_c_o=no
+  echo "$ac_t"no 1>&6
+fi
+CFLAGS="$save_CFLAGS"
+chmod u+w .
+$rm conftest* out/*
+rmdir out
+cd ..
+rmdir conftest
+$rm -r conftest 2>/dev/null
+
+if test x"$compiler_c_o" = x"yes"; then
+  # Check to see if we can write to a .lo
+  echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -c -o conftest.lo"
+  echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5
+if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	compiler_o_lo=no
+      else
+	echo "$ac_t"yes 1>&6
+	compiler_o_lo=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    compiler_o_lo=no
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+else
+  compiler_o_lo=no
+fi
+
+# Check to see if we can do hard links to lock some files if needed
+hard_links="nottested"
+if test "$compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
+  hard_links=yes
+  $rm conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  echo "$ac_t$hard_links" 1>&6
+  $rm conftest*
+  if test "$hard_links" = no; then
+    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+if test "$with_gcc" = yes; then
+  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
+  echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+  if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
+
+    # The compiler can only warn and ignore the option if not recognized
+    # So say no if there are warnings
+      if test -s conftest.err; then
+	echo "$ac_t"no 1>&6
+	compiler_rtti_exceptions=no
+      else
+	echo "$ac_t"yes 1>&6
+	compiler_rtti_exceptions=yes
+      fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    compiler_rtti_exceptions=no
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+
+  if test "$compiler_rtti_exceptions" = "yes"; then
+    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+  else
+    no_builtin_flag=' -fno-builtin'
+  fi
+  
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$special_shlib_compile_flags"; then
+  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$special_shlib_compile_flags[ 	]" >/dev/null; then :
+  else
+    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
+    can_build_shared=no
+  fi
+fi
+
+echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
+$rm conftest*
+echo 'main(){return(0);}' > conftest.c
+save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $link_static_flag"
+echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5
+if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  echo "$ac_t$link_static_flag" 1>&6
+else
+  echo "$ac_t"none 1>&6
+  link_static_flag=
+fi
+LDFLAGS="$save_LDFLAGS"
+$rm conftest*
+
+if test -z "$LN_S"; then
+  # Check to see if we can use ln -s, or we need hard links.
+  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
+  $rm conftest.dat
+  if ln -s X conftest.dat 2>/dev/null; then
+    $rm conftest.dat
+    LN_S="ln -s"
+  else
+    LN_S=ln
+  fi
+  if test "$LN_S" = "ln -s"; then
+    echo "$ac_t"yes 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+fi
+
+# Make sure LD is an absolute path.
+if test -z "$LD"; then
+  ac_prog=ld
+  if test "$with_gcc" = yes; then
+    # Check if gcc -print-prog-name=ld gives a path.
+    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
+    echo "$progname:991: checking for ld used by GCC" >&5
+    ac_prog=`($CC -print-prog-name=ld) 2>&5`
+    case "$ac_prog" in
+    # Accept absolute paths.
+    [\\/]* | [A-Za-z]:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the path of ld
+      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+    "")
+      # If it fails, then pretend we are not using GCC.
+      ac_prog=ld
+      ;;
+    *)
+      # If it is relative, then search for the first ld in PATH.
+      with_gnu_ld=unknown
+      ;;
+    esac
+  elif test "$with_gnu_ld" = yes; then
+    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
+    echo "$progname:1015: checking for GNU ld" >&5
+  else
+    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+    echo "$progname:1018: checking for non-GNU ld" >&5
+  fi
+
+  if test -z "$LD"; then
+    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for ac_dir in $PATH; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+	LD="$ac_dir/$ac_prog"
+	# Check to see if the program is GNU ld.  I'd rather use --version,
+	# but apparently some GNU ld's only accept -v.
+	# Break only if it was the GNU/non-GNU ld that we prefer.
+	if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	  test "$with_gnu_ld" != no && break
+	else
+	  test "$with_gnu_ld" != yes && break
+	fi
+      fi
+    done
+    IFS="$ac_save_ifs"
+  fi
+
+  if test -n "$LD"; then
+    echo "$ac_t$LD" 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+
+  if test -z "$LD"; then
+    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
+    exit 1
+  fi
+fi
+
+# Check to see if it really is or is not GNU ld.
+echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
+# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+echo "$ac_t$with_gnu_ld" 1>&6
+
+# See if the linker supports building shared libraries.
+echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
+
+allow_undefined_flag=
+no_undefined_flag=
+need_lib_prefix=unknown
+need_version=unknown
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+archive_cmds=
+archive_expsym_cmds=
+old_archive_from_new_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+thread_safe_flag_spec=
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+always_export_symbols=no
+export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+include_expsyms=
+# exclude_expsyms can be an egrep regular expression of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+
+case "$host_os" in
+cygwin* | mingw*)
+  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+  # When not using gcc, we currently assume that we are using
+  # Microsoft Visual C++.
+  if test "$with_gcc" != yes; then
+    with_gnu_ld=no
+  fi
+  ;;
+
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # If archive_cmds runs LD, not CC, wlarc should be empty
+  wlarc='${wl}'
+
+  # See if GNU ld supports shared libraries.
+  case "$host_os" in
+  aix3* | aix4*)
+    # On AIX, the GNU linker is very broken
+    ld_shlibs=no
+    cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+
+    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+    # that the semantics of dynamic libraries on AmigaOS, at least up
+    # to version 4, is to share data among multiple programs linked
+    # with the same dynamic library.  Since this doesn't match the
+    # behavior of shared libraries on other platforms, we can use
+    # them.
+    ld_shlibs=no
+    ;;
+
+  beos*)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      allow_undefined_flag=unsupported
+      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+      # support --undefined.  This deserves some investigation.  FIXME
+      archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+
+  cygwin* | mingw*)
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec='-L$libdir'
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+
+    # Extract the symbol export list from an `--export-all' def file,
+    # then regenerate the def file from the symbol export list, so that
+    # the compiled dll only exports the symbol export list.
+    # Be careful not to strip the DATA tag left by newer dlltools.
+    export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+      $DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def  $objdir/$soname-ltdll.$objext $libobjs $convenience~
+      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $objdir/$soname-def > $export_symbols'
+
+    # If DATA tags from a recent dlltool are present, honour them!
+    archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
+      _lt_hint=1;
+      cat $export_symbols | while read symbol; do
+        set dummy \$symbol;
+        case \$# in
+          2) echo "	\$2 @ \$_lt_hint ; " >> $objdir/$soname-def;;
+          *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $objdir/$soname-def;;
+        esac;
+	_lt_hint=`expr 1 + \$_lt_hint`;
+      done~
+      test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+      $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+      $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+      $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,__cygwin_dll_entry@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts'
+
+      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a' 
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
+      # can we support soname and/or expsyms with a.out? -oliva
+    fi
+    ;;
+
+  solaris* | sysv5*)
+    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+      ld_shlibs=no
+      cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;      
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    wlarc=
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    case $host_os in
+    cygwin* | mingw*)
+      # dlltool doesn't understand --whole-archive et. al.
+      whole_archive_flag_spec=
+      ;;
+    *)
+      # ancient GNU ld didn't support --whole-archive et. al.
+      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+        whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      else
+        whole_archive_flag_spec=
+      fi
+      ;;
+    esac
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case "$host_os" in
+  aix3*)
+    allow_undefined_flag=unsupported
+    always_export_symbols=yes
+    archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4*)
+    hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+    hardcode_libdir_separator=':'
+    if test "$with_gcc" = yes; then
+      collect2name=`${CC} -print-prog-name=collect2`
+      if test -f "$collect2name" && \
+	 strings "$collect2name" | grep resolve_lib_name >/dev/null
+      then
+	# We have reworked collect2
+	hardcode_direct=yes
+      else
+	# We have old collect2
+	hardcode_direct=unsupported
+	# It fails to find uninstalled libraries when the uninstalled
+	# path is not listed in the libpath.  Setting hardcode_minus_L
+	# to unsupported forces relinking
+	hardcode_minus_L=yes
+	hardcode_libdir_flag_spec='-L$libdir'
+	hardcode_libdir_separator=
+      fi
+      shared_flag='-shared'
+    else
+      shared_flag='${wl}-bM:SRE'
+      hardcode_direct=yes
+    fi
+    allow_undefined_flag=' ${wl}-berok'
+    archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
+    archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
+    case "$host_os" in aix4.[01]|aix4.[01].*)
+      # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
+      always_export_symbols=yes ;;
+    esac
+   ;;
+
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    # see comment about different semantics on the GNU ld section
+    ld_shlibs=no
+    ;;
+
+  cygwin* | mingw*)
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    # hardcode_libdir_flag_spec is actually meaningless, as there is
+    # no search path for DLLs.
+    hardcode_libdir_flag_spec=' '
+    allow_undefined_flag=unsupported
+    # Tell ltmain to make .lib files, not .a files.
+    libext=lib
+    # FIXME: Setting linknames here is a bad hack.
+    archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+    # The linker will automatically build a .lib file if we build a DLL.
+    old_archive_from_new_cmds='true'
+    # FIXME: Should let the user specify the lib program.
+    old_archive_cmds='lib /OUT:$oldlib$oldobjs'
+    fix_srcfile_path='`cygpath -w $srcfile`'
+    ;;
+
+  freebsd1*)
+    ld_shlibs=no
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+  freebsd*)
+    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    case "$host_os" in
+    hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
+    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
+    esac
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_libdir_separator=:
+    hardcode_direct=yes
+    hardcode_minus_L=yes # Not in the search PATH, but as the default
+			 # location of the library.
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6*)
+    if test "$with_gcc" = yes; then
+      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  netbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'  # a.out
+    else
+      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts'      # ELF
+    fi
+    hardcode_libdir_flag_spec='${wl}-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
+    ;;
+
+  osf3*)
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  osf4* | osf5*)  # As osf3* with the addition of the -msym flag
+    if test "$with_gcc" = yes; then
+      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+    else
+      allow_undefined_flag=' -expect_unresolved \*'
+      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+  rhapsody*)
+    archive_cmds='$CC -bundle -undefined suppress -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flags_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+                                       
+  sco3.2v5*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_shlibpath_var=no
+    runpath_var=LD_RUN_PATH
+    hardcode_runpath_var=yes
+    ;;
+
+  solaris*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+    case "$host_os" in
+    solaris2.[0-5] | solaris2.[0-5].*) ;;
+    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+    esac
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4)
+    if test "x$host_vendor" = xsequent; then
+      # Use $CC to link under sequent, because it throws in some extra .o 
+      # files that make .init and .fini sections work.
+      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $linkopts'
+    else
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    fi
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    hardcode_direct=no #Motorola manual says yes, but my tests say they lie 
+    ;;  
+
+  sysv4.3*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_shlibpath_var=no
+    export_dynamic_flag_spec='-Bexport'
+    ;;
+
+  sysv5*)
+    no_undefined_flag=' -z text'
+    # $CC -shared without GNU ld will not create a library from C++
+    # object files and a static libstdc++, better avoid it by now
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+    hardcode_libdir_flag_spec=
+    hardcode_shlibpath_var=no
+    runpath_var='LD_RUN_PATH'
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  dgux*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_shlibpath_var=no
+    ;;
+
+  sysv4*MP*)
+    if test -d /usr/nec; then
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+      hardcode_shlibpath_var=no
+      runpath_var=LD_RUN_PATH
+      hardcode_runpath_var=yes
+      ld_shlibs=yes
+    fi
+    ;;
+
+  sysv4.2uw2*)
+    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    hardcode_runpath_var=yes
+    runpath_var=LD_RUN_PATH
+    ;;
+
+  unixware7*)
+    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+    runpath_var='LD_RUN_PATH'
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    ld_shlibs=no
+    ;;
+  esac
+fi
+echo "$ac_t$ld_shlibs" 1>&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+if test -z "$NM"; then
+  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
+  case "$NM" in
+  [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
+  *)
+    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+    for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	  NM="$ac_dir/nm -B"
+	  break
+	elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	  NM="$ac_dir/nm -p"
+	  break
+	else
+	  NM=${NM="$ac_dir/nm"} # keep the first match, but
+	  continue # so that we can try to find one that supports BSD flags
+	fi
+      fi
+    done
+    IFS="$ac_save_ifs"
+    test -z "$NM" && NM=nm
+    ;;
+  esac
+  echo "$ac_t$NM" 1>&6
+fi
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+
+# Transform an extracted symbol line into a proper C declaration
+global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*) # Its linker distinguishes data from code symbols
+  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+  ;;
+irix*)
+  symcode='[BCDEGRST]'
+  ;;
+solaris*)
+  symcode='[BDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  symcode='[ABCDGISTW]'
+fi
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Write the raw and C identifiers.
+  global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode\)[ 	][ 	]*\($ac_symprfx\)$sympat$/$symxfrm/p'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+  $rm conftest*
+  cat > conftest.c <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+  echo "$progname:1653: checking if global_symbol_pipe works" >&5
+  if { (eval echo $progname:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { echo "$progname:1657: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.c
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+	  # Now generate the symbol file.
+	  eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'
+
+	  cat <<EOF >> conftest.c
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+	  sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
+	  cat <<\EOF >> conftest.c
+  {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$objext conftstm.$objext
+	  save_LIBS="$LIBS"
+	  save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$objext"
+	  CFLAGS="$CFLAGS$no_builtin_flag"
+	  if { (eval echo $progname:1709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+	    pipe_works=yes
+	  else
+	    echo "$progname: failed program was:" >&5
+	    cat conftest.c >&5
+	  fi
+	  LIBS="$save_LIBS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  $rm conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    global_symbol_pipe=
+  fi
+done
+if test "$pipe_works" = yes; then
+  echo "${ac_t}ok" 1>&6
+else
+  echo "${ac_t}failed" 1>&6
+fi
+
+if test -z "$global_symbol_pipe"; then
+  global_symbol_to_cdecl=
+fi
+
+# Check hardcoding attributes.
+echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var"; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$hardcode_shlibpath_var" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$ac_t$hardcode_action" 1>&6
+
+
+reload_flag=
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
+# PORTME Some linkers may need a different reload flag.
+reload_flag='-r'
+echo "$ac_t$reload_flag" 1>&6
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+# PORTME Fill in your ld.so characteristics
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+file_magic_cmd=
+file_magic_test_file=
+deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
+case "$host_os" in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}.so$major'
+  ;;
+
+aix4*)
+  version_type=linux
+  # AIX has no versioning support, so currently we can not hardcode correct
+  # soname into executable. Probably we can add versioning support to
+  # collect2, so additional links can be useful in future.
+  # We preserve .a as extension for shared libraries though AIX4.2
+  # and later linker supports .so
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
+  shlibpath_var=LIBPATH
+  deplibs_check_method=pass_all
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  ;;
+
+beos*)
+  library_names_spec='${libname}.so'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  deplibs_check_method=pass_all
+  lt_cv_dlopen="load_add_on"
+  lt_cv_dlopen_libs=
+  lt_cv_dlopen_self=yes
+  ;;
+
+bsdi4*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/shlib/libc.so
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  export_dynamic_flag_spec=-rdynamic
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw*)
+  version_type=windows
+  need_version=no
+  need_lib_prefix=no
+  if test "$with_gcc" = yes; then
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
+  else
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+  fi
+  dynamic_linker='Win32 ld.exe'
+  deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  file_magic_cmd='${OBJDUMP} -f'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  lt_cv_dlopen="LoadLibrary"
+  lt_cv_dlopen_libs=
+  ;;
+
+freebsd1*)
+  dynamic_linker=no
+  ;;
+  
+freebsd*)
+  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+  version_type=freebsd-$objformat
+  case "$version_type" in
+    freebsd-elf*)
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+      file_magic_cmd=/usr/bin/file
+      file_magic_test_file=`echo /usr/lib/libc.so*`
+      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      deplibs_check_method=unknown
+      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case "$host_os" in
+  freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  *) # from 3.2 on
+    shlibpath_overrides_runpath=no
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  dynamic_linker="$host_os dld.sl"
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  shlibpath_var=SHLIB_PATH
+  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+  soname_spec='${libname}${release}.sl$major'
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  case "$host_os" in
+  hpux10.20*)
+    # TODO:  Does this work for hpux-11 too?
+    deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    file_magic_cmd=/usr/bin/file
+    file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+irix5* | irix6*)
+  version_type=irix
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}.so.$major'
+  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
+  case "$host_os" in
+  irix5*)
+    libsuff= shlibsuff=
+    # this will be overridden with pass_all, but let us keep it just in case
+    deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case "$LD" in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  deplibs_check_method='pass_all'
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  deplibs_check_method=pass_all
+
+  if test -f /lib/ld.so.1; then
+    dynamic_linker='GNU ld.so'
+  else
+    # Only the GNU ld.so supports shared libraries on MkLinux.
+    case "$host_cpu" in
+    powerpc*) dynamic_linker=no ;;
+    *) dynamic_linker='Linux ld.so' ;;
+    esac
+  fi
+  ;;
+
+netbsd*)
+  version_type=sunos
+  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+    soname_spec='${libname}${release}.so$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+openbsd*)
+  version_type=sunos
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+    need_version=no
+  fi
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+os2*)
+  libname_spec='$name'
+  need_lib_prefix=no
+  library_names_spec='$libname.dll $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_version=no
+  soname_spec='${libname}${release}.so'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  # this will be overridden with pass_all, but let us keep it just in case
+  deplibs_check_method='file_magic COFF format alpha shared library'
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/shlib/libc.so
+  deplibs_check_method='pass_all'
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rhapsody*)
+  version_type=sunos
+  library_names_spec='${libname}.so'
+  soname_spec='${libname}.so'
+  shlibpath_var=DYLD_LIBRARY_PATH
+  deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
+  file_magic_cmd=/usr/bin/file
+  file_magic_test_file=/lib/libc.so
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case "$host_vendor" in
+    sequent)
+      file_magic_cmd='/bin/file'
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+      ;;
+    ncr)
+      deplibs_check_method='pass_all'
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+      file_magic_cmd=/usr/bin/file
+      file_magic_test_file=`echo /usr/lib/libc.so*`
+      ;;
+  esac
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+    soname_spec='$libname.so.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$ac_t$dynamic_linker" 1>&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Report the final consequences.
+echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+
+# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+# configure.in, otherwise build static only libraries.
+case "$host_os" in
+cygwin* | mingw* | os2*)
+  if test x$can_build_shared = xyes; then
+    test x$enable_win32_dll = xno && can_build_shared=no
+    echo "checking if package supports dlls... $can_build_shared" 1>&6
+  fi
+;;
+esac
+
+if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
+  case "$deplibs_check_method" in
+  "file_magic "*)
+    file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+    if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+       egrep "$file_magic_regex" > /dev/null; then
+      :
+    else
+      cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+    fi ;;
+  esac
+fi
+
+echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+
+aix4*)
+  test "$enable_shared" = yes && enable_static=no
+  ;;
+esac
+
+echo "$ac_t$enable_shared" 1>&6
+
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+
+echo "checking whether to build static libraries... $enable_static" 1>&6
+
+if test "$hardcode_action" = relink; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+echo $ac_n "checking for objdir... $ac_c" 1>&6
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$ac_t$objdir" 1>&6
+
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
+  lt_cv_dlopen=no lt_cv_dlopen_libs=
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "$progname:2248: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2256 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo $progname:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+echo "$progname:2288: checking for dlopen" >&5
+if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2293 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char dlopen(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+dlopen();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_dlopen=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_dlopen=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dlopen"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
+echo "$progname:2335: checking for dld_link in -ldld" >&5
+ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2343 "ltconfig"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link();
+
+int main() {
+dld_link()
+; return 0; }
+EOF
+if { (eval echo $progname:2356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+echo "$progname:2375: checking for shl_load" >&5
+if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2380 "ltconfig"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char shl_load(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+shl_load();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo $progname:2405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_shl_load=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_shl_load=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load"
+else
+  echo "$ac_t""no" 1>&6
+echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+echo "$progname:2423: checking for shl_load in -ldld" >&5
+ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldld  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2431 "ltconfig"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load();
+
+int main() {
+shl_load()
+; return 0; }
+EOF
+if { (eval echo $progname:2445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+fi
+
+    
+fi
+
+  
+fi
+
+
+fi
+
+fi
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  fi
+
+  case "$lt_cv_dlopen" in
+  dlopen)
+for ac_hdr in dlfcn.h; do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "$progname:2488: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2493 "ltconfig"
+#include <$ac_hdr>
+int fnord = 0;
+EOF
+ac_try="$ac_compile >/dev/null 2>conftest.out"
+{ (eval echo $progname:2498: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+    if test "x$ac_cv_header_dlfcn_h" = xyes; then
+      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+    fi
+    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2526: checking whether a program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self=cross
+  else
+    cat > conftest.c <<EOF
+#line 2534 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL	RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL	DL_GLOBAL
+# else
+#  define LTDL_GLOBAL	0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW	DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW	DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW	0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+	       if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+
+EOF
+if { (eval echo $progname:2580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+
+  if test "$lt_cv_dlopen_self" = yes; then
+    LDFLAGS="$LDFLAGS $link_static_flag"
+  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+echo "$progname:2599: checking whether a statically linked program can dlopen itself" >&5
+if test "${lt_cv_dlopen_self_static+set}" = set; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+    lt_cv_dlopen_self_static=cross
+  else
+    cat > conftest.c <<EOF
+#line 2607 "ltconfig"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LTDL_GLOBAL	RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+#  define LTDL_GLOBAL	DL_GLOBAL
+# else
+#  define LTDL_GLOBAL	0
+# endif
+#endif
+
+/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LTDL_LAZY_OR_NOW
+# ifdef RTLD_LAZY
+#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+# else
+#  ifdef DL_LAZY
+#   define LTDL_LAZY_OR_NOW	DL_LAZY
+#  else
+#   ifdef RTLD_NOW
+#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+#   else
+#    ifdef DL_NOW
+#     define LTDL_LAZY_OR_NOW	DL_NOW
+#    else
+#     define LTDL_LAZY_OR_NOW	0
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+fnord() { int i=42;}
+main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+    if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+
+EOF
+if { (eval echo $progname:2653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  lt_cv_dlopen_self_static=yes
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  lt_cv_dlopen_self_static=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+fi
+    ;;
+  esac
+
+  case "$lt_cv_dlopen_self" in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case "$lt_cv_dlopen_self_static" in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+# Copy echo and quote the copy, instead of the original, because it is
+# used later.
+ltecho="$echo"
+if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
+fi
+LTSHELL="$SHELL"
+
+LTCONFIG_VERSION="$VERSION"
+
+# Only quote variables if we're using ltmain.sh.
+case "$ltmain" in
+*.sh)
+  # Now quote all the things that may contain metacharacters.
+  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
+    AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+    reload_flag reload_cmds wl \
+    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+    library_names_spec soname_spec \
+    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
+    file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
+    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+
+    case "$var" in
+    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+    old_postinstall_cmds | old_postuninstall_cmds | \
+    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+    postinstall_cmds | postuninstall_cmds | \
+    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+      # Double-quote double-evaled strings.
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+      ;;
+    *)
+      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      ;;
+    esac
+  done
+
+  case "$ltecho" in
+  *'\$0 --fallback-echo"')
+    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+    ;;
+  esac
+
+  trap "$rm \"$ofile\"; exit 1" 1 2 15
+  echo "creating $ofile"
+  $rm "$ofile"
+  cat <<EOF > "$ofile"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="sed -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+
+### BEGIN LIBTOOL CONFIG
+EOF
+  cfgfile="$ofile"
+  ;;
+
+*)
+  # Double-quote the variables that need it (for aesthetics).
+  for var in old_CC old_CFLAGS old_CPPFLAGS \
+    old_LD old_LDFLAGS old_LIBS \
+    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
+    eval "$var=\\\"\$var\\\""
+  done
+
+  # Just create a config file.
+  cfgfile="$ofile.cfg"
+  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+  echo "creating $cfgfile"
+  $rm "$cfgfile"
+  cat <<EOF > "$cfgfile"
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+EOF
+  ;;
+esac
+
+cat <<EOF >> "$cfgfile"
+# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
+# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
+# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
+#   $0$ltconfig_args
+#
+# Compiler and other test output produced by $progname, useful for
+# debugging $progname, is in ./config.log if it exists.
+
+# The version of $progname that generated this script.
+LTCONFIG_VERSION=$LTCONFIG_VERSION
+
+# Shell to use when invoking shell scripts.
+SHELL=$LTSHELL
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+
+# An echo program that does not interpret backslashes.
+echo=$ltecho
+
+# The archiver.
+AR=$AR
+
+# The default C compiler.
+CC=$CC
+
+# The linker used to build libraries.
+LD=$LD
+
+# Whether we need hard or soft links.
+LN_S=$LN_S
+
+# A BSD-compatible nm program.
+NM=$NM
+
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+
+# Used on cygwin: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# How to create reloadable object files.
+reload_flag=$reload_flag
+reload_cmds=$reload_cmds
+
+# How to pass a linker flag through the compiler.
+wl=$wl
+
+# Object file suffix (normally "o").
+objext="$objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Executable file suffix (normally "").
+exeext="$exeext"
+
+# Additional compiler flags for building library objects.
+pic_flag=$pic_flag
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$compiler_c_o
+
+# Can we write directly to a .lo ?
+compiler_o_lo=$compiler_o_lo
+
+# Must we lock files when doing compilation ?
+need_locks=$need_locks
+
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Whether dlopen is supported.
+dlopen=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$link_static_flag
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$no_builtin_flag
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$whole_archive_flag_spec
+
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$thread_safe_flag_spec
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec=$libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$soname_spec
+
+# Commands used to build and install an old-style archive.
+RANLIB=$RANLIB
+old_archive_cmds=$old_archive_cmds
+old_postinstall_cmds=$old_postinstall_cmds
+old_postuninstall_cmds=$old_postuninstall_cmds
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$old_archive_from_new_cmds
+
+# Commands used to build and install a shared archive.
+archive_cmds=$archive_cmds
+archive_expsym_cmds=$archive_expsym_cmds
+postinstall_cmds=$postinstall_cmds
+postuninstall_cmds=$postuninstall_cmds
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$deplibs_check_method
+
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$file_magic_cmd
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$allow_undefined_flag
+
+# Flag that forces no undefined symbols.
+no_undefined_flag=$no_undefined_flag
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$finish_cmds
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$finish_eval
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$global_symbol_to_cdecl
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$hardcode_libdir_separator
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$sys_lib_search_path_spec
+
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+
+# Set to yes if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$include_expsyms
+
+EOF
+
+case "$ltmain" in
+*.sh)
+  echo '### END LIBTOOL CONFIG' >> "$ofile"
+  echo >> "$ofile"
+  case "$host_os" in
+  aix3*)
+    cat <<\EOF >> "$ofile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+    ;;
+  esac
+
+  # Append the ltmain.sh script.
+  sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+
+  chmod +x "$ofile"
+  ;;
+
+*)
+  # Compile the libtool program.
+  echo "FIXME: would compile $ltmain"
+  ;;
+esac
+
+test -n "$cache_file" || exit 0
+
+# AC_CACHE_SAVE
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/ltmain.sh b/ltmain.sh
new file mode 100644
index 0000000..a9b7a67
--- /dev/null
+++ b/ltmain.sh
@@ -0,0 +1,4028 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit 0
+fi
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.3.5
+TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)"
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+SP2NL='tr \040 \012'
+NL2SP='tr \015\012 \040\040'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+if test "$LTCONFIG_VERSION" != "$VERSION"; then
+  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  echo "$modename: not configured to build any kind of library" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+  arg="$1"
+  shift
+
+  case "$arg" in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case "$prev" in
+    execute_dlfiles)
+      eval "$prev=\"\$$prev \$arg\""
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case "$arg" in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+    exit 0
+    ;;
+
+  --config)
+    sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
+    exit 0
+    ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+    exit 0
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --quiet | --silent)
+    show=:
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+fi
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    case "$nonopt" in
+    *cc | *++ | gcc* | *-gcc*)
+      mode=link
+      for arg
+      do
+	case "$arg" in
+	-c)
+	   mode=compile
+	   break
+	   ;;
+	esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+	if test -n "$nonopt"; then
+	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+	else
+	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+	fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case "$mode" in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    lastarg=
+    srcfile="$nonopt"
+    suppress_output=
+
+    user_target=no
+    for arg
+    do
+      # Accept any command-line options.
+      case "$arg" in
+      -o)
+	if test "$user_target" != "no"; then
+	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	  exit 1
+	fi
+	user_target=next
+	;;
+
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+      esac
+
+      case "$user_target" in
+      next)
+	# The next one is the -o target name
+	user_target=yes
+	continue
+	;;
+      yes)
+	# We got the output file
+	user_target=set
+	libobj="$arg"
+	continue
+	;;
+      esac
+
+      # Accept the current argument as the source file.
+      lastarg="$srcfile"
+      srcfile="$arg"
+
+      # Aesthetically quote the previous argument.
+
+      # Backslashify any backslashes, double quotes, and dollar signs.
+      # These are the only characters that are still specially
+      # interpreted inside of double-quoted scrings.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly in scan
+      # sets, so we specify it separately.
+      case "$lastarg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      # Add the previous argument to base_compile.
+      if test -z "$base_compile"; then
+	base_compile="$lastarg"
+      else
+	base_compile="$base_compile $lastarg"
+      fi
+    done
+
+    case "$user_target" in
+    set)
+      ;;
+    no)
+      # Get the name of the library object.
+      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    *)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSfmso]'
+    case "$libobj" in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case "$libobj" in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $libobj"
+    else
+      removelist="$libobj"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit 1" 1 2 15
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit 1" 1 2 15
+    else
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until ln "$0" "$lockfile" 2>/dev/null; do
+	$show "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+      echo $srcfile > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      # All platforms use -DPIC, to notify preprocessed assembler code.
+      command="$base_compile $srcfile $pic_flag -DPIC"
+      if test "$build_old_libs" = yes; then
+	lo_libobj="$libobj"
+	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$dir" = "X$libobj"; then
+	  dir="$objdir"
+	else
+	  dir="$dir/$objdir"
+	fi
+	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+
+	if test -d "$dir"; then
+	  $show "$rm $libobj"
+	  $run $rm $libobj
+	else
+	  $show "$mkdir $dir"
+	  $run $mkdir $dir
+	  status=$?
+	  if test $status -ne 0 && test ! -d $dir; then
+	    exit $status
+	  fi
+	fi
+      fi
+      if test "$compiler_o_lo" = yes; then
+	output_obj="$libobj"
+	command="$command -o $output_obj"
+      elif test "$compiler_c_o" = yes; then
+	output_obj="$obj"
+	command="$command -o $output_obj"
+      fi
+
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	test -n "$output_obj" && $run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test x"$output_obj" != x"$libobj"; then
+	$show "$mv $output_obj $libobj"
+	if $run $mv $output_obj $libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # If we have no pic_flag, then copy the object into place and finish.
+      if test -z "$pic_flag" && test "$build_old_libs" = yes; then
+	# Rename the .lo from within objdir to obj
+	if test -f $obj; then
+	  $show $rm $obj
+	  $run $rm $obj
+	fi
+
+	$show "$mv $libobj $obj"
+	if $run $mv $libobj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+
+	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$xdir" = "X$obj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+	# Now arrange that obj and lo_libobj become the same file
+	$show "(cd $xdir && $LN_S $baseobj $libobj)"
+	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+	  exit 0
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Allow error messages only from the first compilation.
+      suppress_output=' >/dev/null 2>&1'
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      command="$base_compile $srcfile"
+      if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+	output_obj="$obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$output_obj"
+      $show "$command"
+      if $run eval "$command"; then :
+      else
+	$run $rm $removelist
+	exit 1
+      fi
+
+      if test "$need_locks" = warn &&
+	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+	echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit 1
+      fi
+
+      # Just move the object if needed
+      if test x"$output_obj" != x"$obj"; then
+	$show "$mv $output_obj $obj"
+	if $run $mv $output_obj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Create an invalid libtool object if no PIC, so that we do not
+      # accidentally link it into a program.
+      if test "$build_libtool_libs" != yes; then
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > \$libobj" || exit $?
+      else
+	# Move the .lo from within objdir
+	$show "$mv $libobj $lo_libobj"
+	if $run $mv $libobj $lo_libobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+    fi
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $rm "$lockfile"
+    fi
+
+    exit 0
+    ;;
+
+  # libtool link mode
+  link)
+    modename="$modename: link"
+    case "$host" in
+    *-*-cygwin* | *-*-mingw* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invokation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+
+      # This is a source program that is used to create dlls on Windows
+      # Don't remove nor modify the starting and closing comments
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+      # This is a source program that is used to create import libraries
+      # on Windows for dlls which lack them. Don't remove nor modify the
+      # starting and closing comments
+# /* impgen.c starts here */
+# /*   Copyright (C) 1999 Free Software Foundation, Inc.
+# 
+#  This file is part of GNU libtool.
+# 
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+# 
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+# 
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#  */
+# 
+#  #include <stdio.h>		/* for printf() */
+#  #include <unistd.h>		/* for open(), lseek(), read() */
+#  #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
+#  #include <string.h>		/* for strdup() */
+# 
+#  static unsigned int
+#  pe_get16 (fd, offset)
+#       int fd;
+#       int offset;
+#  {
+#    unsigned char b[2];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 2);
+#    return b[0] + (b[1]<<8);
+#  }
+# 
+#  static unsigned int
+#  pe_get32 (fd, offset)
+#      int fd;
+#      int offset;
+#  {
+#    unsigned char b[4];
+#    lseek (fd, offset, SEEK_SET);
+#    read (fd, b, 4);
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+# 
+#  static unsigned int
+#  pe_as32 (ptr)
+#       void *ptr;
+#  {
+#    unsigned char *b = ptr;
+#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+#  }
+# 
+#  int
+#  main (argc, argv)
+#      int argc;
+#      char *argv[];
+#  {
+#      int dll;
+#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+#      unsigned long export_rva, export_size, nsections, secptr, expptr;
+#      unsigned long name_rvas, nexp;
+#      unsigned char *expdata, *erva;
+#      char *filename, *dll_name;
+# 
+#      filename = argv[1];
+# 
+#      dll = open(filename, O_RDONLY|O_BINARY);
+#      if (!dll)
+#  	return 1;
+# 
+#      dll_name = filename;
+#    
+#      for (i=0; filename[i]; i++)
+#  	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
+#  	    dll_name = filename + i +1;
+# 
+#      pe_header_offset = pe_get32 (dll, 0x3c);
+#      opthdr_ofs = pe_header_offset + 4 + 20;
+#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
+# 
+#      if (num_entries < 1) /* no exports */
+#  	return 1;
+# 
+#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
+#      export_size = pe_get32 (dll, opthdr_ofs + 100);
+#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+#      secptr = (pe_header_offset + 4 + 20 +
+#  	      pe_get16 (dll, pe_header_offset + 4 + 16));
+# 
+#      expptr = 0;
+#      for (i = 0; i < nsections; i++)
+#      {
+#  	char sname[8];
+#  	unsigned long secptr1 = secptr + 40 * i;
+#  	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+#  	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+#  	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+#  	lseek(dll, secptr1, SEEK_SET);
+#  	read(dll, sname, 8);
+#  	if (vaddr <= export_rva && vaddr+vsize > export_rva)
+#  	{
+#  	    expptr = fptr + (export_rva - vaddr);
+#  	    if (export_rva + export_size > vaddr + vsize)
+#  		export_size = vsize - (export_rva - vaddr);
+#  	    break;
+#  	}
+#      }
+# 
+#      expdata = (unsigned char*)malloc(export_size);
+#      lseek (dll, expptr, SEEK_SET);
+#      read (dll, expdata, export_size);
+#      erva = expdata - export_rva;
+# 
+#      nexp = pe_as32 (expdata+24);
+#      name_rvas = pe_as32 (expdata+32);
+# 
+#      printf ("EXPORTS\n");
+#      for (i = 0; i<nexp; i++)
+#      {
+#  	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+#  	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+#      }
+# 
+#      return 0;
+#  }
+# /* impgen.c ends here */
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    linkopts=
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      lib_search_path=
+    fi
+    # now prepend the system-specific ones
+    eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+    
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    link_against_libtool_libs=
+    ltlibs=
+    module=no
+    objs=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case "$arg" in
+      -all-static | -static)
+	if test "X$arg" = "X-all-static"; then
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	else
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	fi
+	build_libtool_libs=no
+	build_old_libs=yes
+	prefer_static_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test $# -gt 0; do
+      arg="$1"
+      shift
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case "$prev" in
+	output)
+	  compile_command="$compile_command @OUTPUT@"
+	  finalize_command="$finalize_command @OUTPUT@"
+	  ;;
+	esac
+
+	case "$prev" in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    compile_command="$compile_command @SYMFILE@"
+	    finalize_command="$finalize_command @SYMFILE@"
+	    preload=yes
+	  fi
+	  case "$arg" in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
+	    prev=
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  if test ! -f "$arg"; then
+	    $echo "$modename: symbol file \`$arg' does not exist"
+	    exit 1
+	  fi
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case "$arg" in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit 1
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi
+
+      prevarg="$arg"
+
+      case "$arg" in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  $echo "$modename: not more than one -exported-symbols argument allowed"
+	  exit 1
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -L*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
+	case "$dir" in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    absdir="$dir"
+	  fi
+	  dir="$absdir"
+	  ;;
+	esac
+	case " $deplibs " in
+	*" $arg "*) ;;
+	*) deplibs="$deplibs $arg";;
+	esac
+	case " $lib_search_path " in
+	*" $dir "*) ;;
+	*) lib_search_path="$lib_search_path $dir";;
+	esac
+	case "$host" in
+	*-*-cygwin* | *-*-mingw* | *-*-os2*)
+	  dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+	  case ":$dllsearchpath:" in
+	  ::) dllsearchpath="$dllsearchdir";;
+	  *":$dllsearchdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
+	  esac
+	  ;;
+	esac
+	;;
+
+      -l*)
+	if test "$arg" = "-lc"; then
+	  case "$host" in
+	  *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+	    # These systems don't actually have c library (as such)
+	    continue
+	    ;;
+	  esac
+	elif test "$arg" = "-lm"; then
+	  case "$host" in
+	  *-*-cygwin* | *-*-beos*)
+	    # These systems don't actually have math library (as such)
+	    continue
+	    ;;
+	  esac
+	fi
+	deplibs="$deplibs $arg"
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case "$dir" in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit 1
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
+
+      -static)
+	# If we have no pic_flag, then this is the same as -all-static.
+	if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+
+      *.o | *.obj | *.a | *.lib)
+	# A standard object.
+	objs="$objs $arg"
+	;;
+
+      *.lo)
+	# A library object.
+	if test "$prev" = dlfiles; then
+	  dlfiles="$dlfiles $arg"
+	  if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
+	    prev=
+	    continue
+	  else
+	    # If libtool objects are unsupported, then we need to preload.
+	    prev=dlprefiles
+	  fi
+	fi
+
+	if test "$prev" = dlprefiles; then
+	  # Preload the old-style object.
+	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+	  prev=
+	fi
+	libobjs="$libobjs $arg"
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	dlname=
+	libdir=
+	library_names=
+	old_library=
+
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+	  exit 1
+	fi
+
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variable installed.
+	installed=yes
+
+	# Read the .la file
+	# If there is no directory component, then add one.
+	case "$arg" in
+	*/* | *\\*) . $arg ;;
+	*) . ./$arg ;;
+	esac
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+	  exit 1
+	fi
+
+	# Find the relevant object directory and library name.
+	name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
+
+	if test "X$installed" = Xyes; then
+	  dir="$libdir"
+	else
+	  dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$dir" = "X$arg"; then
+	    dir="$objdir"
+	  else
+	    dir="$dir/$objdir"
+	  fi
+	fi
+
+	if test -n "$dependency_libs"; then
+	  # Extract -R and -L from dependency_libs
+	  temp_deplibs=
+	  for deplib in $dependency_libs; do
+	    case "$deplib" in
+	    -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+		 case " $rpath $xrpath " in
+		 *" $temp_xrpath "*) ;;
+		 *) xrpath="$xrpath $temp_xrpath";;
+		 esac;;
+	    -L*) case "$compile_command $temp_deplibs " in
+		 *" $deplib "*) ;;
+		 *) temp_deplibs="$temp_deplibs $deplib";;
+		 esac
+		 temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+		 case " $lib_search_path " in
+		 *" $temp_dir "*) ;;
+		 *) lib_search_path="$lib_search_path $temp_dir";;
+		 esac
+		 ;;
+	    *) temp_deplibs="$temp_deplibs $deplib";;
+	    esac
+	  done
+	  dependency_libs="$temp_deplibs"
+	fi
+
+	if test -z "$libdir"; then
+	  # It is a libtool convenience library, so add in its objects.
+	  convenience="$convenience $dir/$old_library"
+	  old_convenience="$old_convenience $dir/$old_library"
+	  deplibs="$deplibs$dependency_libs"
+	  compile_command="$compile_command $dir/$old_library$dependency_libs"
+	  finalize_command="$finalize_command $dir/$old_library$dependency_libs"
+	  continue
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$prev" = dlfiles; then
+	  dlfiles="$dlfiles $arg"
+	  if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking statically,
+	    # we need to preload.
+	    prev=dlprefiles
+	  else
+	    # We should not create a dependency on this library, but we
+	    # may need any libraries it requires.
+	    compile_command="$compile_command$dependency_libs"
+	    finalize_command="$finalize_command$dependency_libs"
+	    prev=
+	    continue
+	  fi
+	fi
+
+	# The library was specified with -dlpreopen.
+	if test "$prev" = dlprefiles; then
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    dlprefiles="$dlprefiles $dir/$old_library"
+	  else
+	    dlprefiles="$dlprefiles $dir/$linklib"
+	  fi
+	  prev=
+	fi
+
+	if test -n "$library_names" &&
+	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+	  link_against_libtool_libs="$link_against_libtool_libs $arg"
+	  if test -n "$shlibpath_var"; then
+	    # Make sure the rpath contains only unique directories.
+	    case "$temp_rpath " in
+	    *" $dir "*) ;;
+	    *) temp_rpath="$temp_rpath $dir" ;;
+	    esac
+	  fi
+
+	  # We need an absolute path.
+	  case "$dir" in
+	  [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+	  *)
+	    absdir=`cd "$dir" && pwd`
+	    if test -z "$absdir"; then
+	      $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+	      $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	      absdir="$dir"
+	    fi
+	    ;;
+	  esac
+	  
+	  # This is the magic to use -rpath.
+	  # Skip directories that are in the system default run-time
+	  # search path, unless they have been requested with -R.
+	  case " $sys_lib_dlsearch_path " in
+	  *" $absdir "*) ;;
+	  *)
+	    case "$compile_rpath " in
+	    *" $absdir "*) ;;
+	    *) compile_rpath="$compile_rpath $absdir" 
+	    esac
+	    ;;
+	  esac
+
+	  case " $sys_lib_dlsearch_path " in
+	  *" $libdir "*) ;;
+	  *)
+	    case "$finalize_rpath " in
+	    *" $libdir "*) ;;
+	    *) finalize_rpath="$finalize_rpath $libdir"
+	    esac
+	    ;;
+	  esac
+
+	  lib_linked=yes
+	  case "$hardcode_action" in
+	  immediate | unsupported)
+	    if test "$hardcode_direct" = no; then
+	      compile_command="$compile_command $dir/$linklib"
+	      deplibs="$deplibs $dir/$linklib"
+	      case "$host" in
+	      *-*-cygwin* | *-*-mingw* | *-*-os2*)
+		dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+		if test -n "$dllsearchpath"; then
+		  dllsearchpath="$dllsearchpath:$dllsearchdir"
+		else
+		  dllsearchpath="$dllsearchdir"
+		fi
+		;;
+	      esac
+	    elif test "$hardcode_minus_L" = no; then
+	      case "$host" in
+	      *-*-sunos*)
+		compile_shlibpath="$compile_shlibpath$dir:"
+		;;
+	      esac
+	      case "$compile_command " in
+	      *" -L$dir "*) ;;
+	      *) compile_command="$compile_command -L$dir";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -L$dir -l$name"
+	    elif test "$hardcode_shlibpath_var" = no; then
+	      case ":$compile_shlibpath:" in
+	      *":$dir:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$dir:";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -l$name"
+	    else
+	      lib_linked=no
+	    fi
+	    ;;
+
+	  relink)
+	    if test "$hardcode_direct" = yes; then
+	      compile_command="$compile_command $absdir/$linklib"
+	      deplibs="$deplibs $absdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      case "$compile_command " in
+	      *" -L$absdir "*) ;;
+	      *) compile_command="$compile_command -L$absdir";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -L$absdir -l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case ":$compile_shlibpath:" in
+	      *":$absdir:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$absdir:";;
+	      esac
+	      compile_command="$compile_command -l$name"
+	      deplibs="$deplibs -l$name"
+	    else
+	      lib_linked=no
+	    fi
+	    ;;
+
+	  *)
+	    lib_linked=no
+	    ;;
+	  esac
+
+	  if test "$lib_linked" != yes; then
+	    $echo "$modename: configuration error: unsupported hardcode properties"
+	    exit 1
+	  fi
+
+	  # Finalize command for both is simple: just hardcode it.
+	  if test "$hardcode_direct" = yes; then
+	    finalize_command="$finalize_command $libdir/$linklib"
+	  elif test "$hardcode_minus_L" = yes; then
+	    case "$finalize_command " in
+	    *" -L$libdir "*) ;;
+	    *) finalize_command="$finalize_command -L$libdir";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  elif test "$hardcode_shlibpath_var" = yes; then
+	    case ":$finalize_shlibpath:" in
+	    *":$libdir:"*) ;;
+	    *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  else
+	    # We cannot seem to hardcode it, guess we'll fake it.
+	    case "$finalize_command " in
+	    *" -L$dir "*) ;;
+	    *) finalize_command="$finalize_command -L$libdir";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  fi
+	else
+	  # Transform directly to old archives if we don't build new libraries.
+	  if test -n "$pic_flag" && test -z "$old_library"; then
+	    $echo "$modename: cannot find static library for \`$arg'" 1>&2
+	    exit 1
+	  fi
+
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_command="$compile_command $dir/$linklib"
+	    finalize_command="$finalize_command $dir/$linklib"
+	  else
+	    case "$compile_command " in
+	    *" -L$dir "*) ;;
+	    *) compile_command="$compile_command -L$dir";;
+	    esac
+	    compile_command="$compile_command -l$name"
+	    case "$finalize_command " in
+	    *" -L$dir "*) ;;
+	    *) finalize_command="$finalize_command -L$dir";;
+	    esac
+	    finalize_command="$finalize_command -l$name"
+	  fi
+	fi
+
+	# Add in any libraries that this one depends upon.
+	compile_command="$compile_command$dependency_libs"
+	finalize_command="$finalize_command$dependency_libs"
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    case "$output" in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+
+    *.a | *.lib)
+      if test -n "$link_against_libtool_libs"; then
+	$echo "$modename: error: cannot link libtool libraries into archives" 1>&2
+	exit 1
+      fi
+
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      ;;
+
+    *.la)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case "$outputname" in
+      lib*)
+	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	if test "$module" = no; then
+	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval libname=\"$libname_spec\"
+	else
+	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	fi
+	;;
+      esac
+
+      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$output_objdir" = "X$output"; then
+	output_objdir="$objdir"
+      else
+	output_objdir="$output_objdir/$objdir"
+      fi
+
+      if test -n "$objs"; then
+	$echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
+	exit 1
+      fi
+
+      # How the heck are we supposed to write a wrapper for a shared library?
+      if test -n "$link_against_libtool_libs"; then
+	 $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
+	 exit 1
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test $# -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  libext=al
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+	dependency_libs="$deplibs"
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	current="$2"
+	revision="$3"
+	age="$4"
+
+	# Check that each of the things are valid numbers.
+	case "$current" in
+	[0-9]*) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case "$revision" in
+	[0-9]*) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case "$age" in
+	[0-9]*) ;;
+	*)
+	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	if test $age -gt $current; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case "$version_type" in
+	none) ;;
+
+	irix)
+	  major=`expr $current - $age + 1`
+	  versuffix="$major.$revision"
+	  verstring="sgi$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test $loop != 0; do
+	    iface=`expr $revision - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="sgi$major.$iface:$verstring"
+	  done
+	  ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test $loop != 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	windows)
+	  # Like Linux, but with '-' rather than '.', since we only
+	  # want one extension on Windows 95.
+	  major=`expr $current - $age`
+	  versuffix="-$major-$age-$revision"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  verstring="0.0"
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+	
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+	dependency_libs="$deplibs"
+	case "$host" in
+	*-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*)
+	  # these systems don't actually have a c library (as such)!
+	  ;;
+        *-*-rhapsody*)
+	  # rhapsody is a little odd...
+	  deplibs="$deplibs -framework System"
+	  ;;
+	*)
+	  # Add libc to deplibs on all other systems.
+	  deplibs="$deplibs -lc"
+	  ;;
+	esac
+      fi
+
+      # Create the output directory, or remove our outputs if we need to.
+      if test -d $output_objdir; then
+	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+      else
+	$show "$mkdir $output_objdir"
+	$run $mkdir $output_objdir
+	status=$?
+	if test $status -ne 0 && test ! -d $output_objdir; then
+	  exit $status
+	fi
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      if test "$build_libtool_libs" = yes; then
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case "$deplibs_check_method" in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behaviour.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $rm conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $rm conftest
+	  $CC -o conftest conftest.c $deplibs
+	  if test $? -eq 0 ; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	      # If $name is empty we are operating on a -L argument.
+	      if test "$name" != "" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		set dummy $deplib_matches
+		deplib_match=$2
+		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		  newdeplibs="$newdeplibs $i"
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning: This library needs some functionality provided by $i."
+		  echo "*** I have the capability to make that library automatically link in when"
+		  echo "*** you link to this library.  But I can only do this if you have a"
+		  echo "*** shared version of the library, which you do not appear to have."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  else
+	    # Error occured in the first compile.  Let's try to salvage the situation:
+	    # Compile a seperate program for each library.
+	    for i in $deplibs; do
+	      name="`expr $i : '-l\(.*\)'`"
+	     # If $name is empty we are operating on a -L argument.
+	      if test "$name" != "" ; then
+		$rm conftest
+		$CC -o conftest conftest.c $i
+		# Did it work?
+		if test $? -eq 0 ; then
+		  ldd_output=`ldd conftest`
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    echo "*** Warning: This library needs some functionality provided by $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which you do not appear to have."
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "***  make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
+	  for a_deplib in $deplibs; do
+	    name="`expr $a_deplib : '-l\(.*\)'`"
+	    # If $name is empty we are operating on a -L argument.
+	    if test "$name" != "" ; then
+	      libname=`eval \\$echo \"$libname_spec\"`
+	      for i in $lib_search_path; do
+		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		    for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null \
+			 | grep " -> " >/dev/null; then
+			continue 
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+			case "$potliblink" in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+			 | sed 10q \
+			 | egrep "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		    done
+	      done
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have."
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
+	     grep . >/dev/null; then
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+      
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	# Get the real and link names of the library.
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+
+	lib="$output_objdir/$realname"
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+	# Ensure that we have .o objects for linkers which dislike .lo
+	# (e.g. aix) in case we are running --disable-static
+	for obj in $libobjs; do
+	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$obj"; then
+	    xdir="."
+	  else
+	    xdir="$xdir"
+	  fi
+	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	  if test ! -f $xdir/$oldobj; then
+	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+	  fi
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    eval cmds=\"$export_symbols_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd" || exit $?
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex"; then
+	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	fi
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "mkdir $gentop"
+	    $run mkdir "$gentop"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$gentop"; then
+	      exit $status
+	    fi
+	    generated="$generated $gentop"
+
+	    for xlib in $convenience; do
+	      # Extract the objects.
+	      case "$xlib" in
+	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	      *) xabs=`pwd`"/$xlib" ;;
+	      esac
+	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	      xdir="$gentop/$xlib"
+
+	      $show "${rm}r $xdir"
+	      $run ${rm}r "$xdir"
+	      $show "mkdir $xdir"
+	      $run mkdir "$xdir"
+	      status=$?
+	      if test $status -ne 0 && test ! -d "$xdir"; then
+		exit $status
+	      fi
+	      $show "(cd $xdir && $AR x $xabs)"
+	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	    done
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linkopts="$linkopts $flag"
+	fi
+
+	# Do each of the archive commands.
+	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  eval cmds=\"$archive_expsym_cmds\"
+	else
+	  eval cmds=\"$archive_cmds\"
+	fi
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    *.lo | *.o | *.obj)
+      if test -n "$link_against_libtool_libs"; then
+	$echo "$modename: error: cannot link libtool libraries into objects" 1>&2
+	exit 1
+      fi
+
+      if test -n "$deplibs"; then
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case "$output" in
+      *.lo)
+	if test -n "$objs"; then
+	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  exit 1
+	fi
+	libobj="$output"
+	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec
+      wl= 
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+	else
+	  gentop="$output_objdir/${obj}x"
+	  $show "${rm}r $gentop"
+	  $run ${rm}r "$gentop"
+	  $show "mkdir $gentop"
+	  $run mkdir "$gentop"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$gentop"; then
+	    exit $status
+	  fi
+	  generated="$generated $gentop"
+
+	  for xlib in $convenience; do
+	    # Extract the objects.
+	    case "$xlib" in
+	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	    *) xabs=`pwd`"/$xlib" ;;
+	    esac
+	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	    xdir="$gentop/$xlib"
+
+	    $show "${rm}r $xdir"
+	    $run ${rm}r "$xdir"
+	    $show "mkdir $xdir"
+	    $run mkdir "$xdir"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$xdir"; then
+	      exit $status
+	    fi
+	    $show "(cd $xdir && $AR x $xabs)"
+	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+	  done
+	fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
+
+      output="$obj"
+      eval cmds=\"$reload_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	exit 0
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	$show "echo timestamp > $libobj"
+	$run eval "echo timestamp > $libobj" || exit $?
+	exit 0
+      fi
+
+      if test -n "$pic_flag"; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	eval cmds=\"$reload_cmds\"
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+      else
+	# Just create a symlink.
+	$show $rm $libobj
+	$run $rm $libobj
+	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+	if test "X$xdir" = "X$libobj"; then
+	  xdir="."
+	else
+	  xdir="$xdir"
+	fi
+	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
+	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+      fi
+
+      if test -n "$gentop"; then
+	$show "${rm}r $gentop"
+	$run ${rm}r $gentop
+      fi
+
+      exit 0
+      ;;
+
+    # Anything else should be a program.
+    *)
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+	if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
+	   test "$dlopen_self_static" = unknown; then
+	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+	fi 
+      fi
+    
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$compile_rpath " in
+	  *" $libdir "*) ;;
+	  *) compile_rpath="$compile_rpath $libdir" ;;
+	  esac
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$output_objdir" = "X$output"; then
+	output_objdir="$objdir"
+      else
+	output_objdir="$output_objdir/$objdir"
+      fi
+
+      # Create the binary in the object directory, then wrap it.
+      if test ! -d $output_objdir; then
+	$show "$mkdir $output_objdir"
+	$run $mkdir $output_objdir
+	status=$?
+	if test $status -ne 0 && test ! -d $output_objdir; then
+	  exit $status
+	fi
+      fi
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	  dlsyms="${outputname}S.c"
+	else
+	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+	fi
+      fi
+
+      if test -n "$dlsyms"; then
+	case "$dlsyms" in
+	"") ;;
+	*.c)
+	  # Discover the nlist of each of the dlfiles.
+	  nlist="$output_objdir/${outputname}.nm"
+
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Parse the name list into a source file.
+	  $show "creating $output_objdir/$dlsyms"
+
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	  if test "$dlself" = yes; then
+	    $show "generating symbol list for \`$output'"
+
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+	    # Add our own program objects to the symbol list.
+	    progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	    for arg in $progfiles; do
+	      $show "extracting global C symbols from \`$arg'"
+	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	    done
+
+	    if test -n "$exclude_expsyms"; then
+	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+	    
+	    if test -n "$export_symbols_regex"; then
+	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    # Prepare the list of exported symbols
+	    if test -z "$export_symbols"; then
+	      export_symbols="$output_objdir/$output.exp"
+	      $run $rm $export_symbols
+	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	    else
+	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+	      $run eval 'mv "$nlist"T "$nlist"'
+	    fi
+	  fi
+
+	  for arg in $dlprefiles; do
+	    $show "extracting global C symbols from \`$arg'"
+	    name=`echo "$arg" | sed -e 's%^.*/%%'`
+	    $run eval 'echo ": $name " >> "$nlist"'
+	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -z "$run"; then
+	    # Make sure we have at least an empty file.
+	    test -f "$nlist" || : > "$nlist"
+
+	    if test -n "$exclude_expsyms"; then
+	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $mv "$nlist"T "$nlist"
+	    fi
+
+	    # Try sorting and uniquifying the output.
+	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
+	      :
+	    else
+	      grep -v "^: " < "$nlist" > "$nlist"S
+	    fi
+
+	    if test -f "$nlist"S; then
+	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    else
+	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+  const char *name;
+  lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+	    sed -n -e 's/^: \([^ ]*\) $/  {\"\1\", (lt_ptr_t) 0},/p' \
+		-e 's/^. \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr_t) \&\2},/p' \
+		  < "$nlist" >> "$output_objdir/$dlsyms"
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr_t) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	  fi
+
+	  pic_flag_for_symtable=
+	  case "$host" in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
+	    esac;;
+	  *-*-hpux*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
+	    esac
+	  esac
+
+	  # Now compile the dynamic symbol file.
+	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Transform the symbol file into the correct name.
+	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+	  ;;
+	*)
+	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	  exit 1
+	  ;;
+	esac
+      else
+	# We keep going just in case the user didn't refer to
+	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+	# really was required.
+
+	# Nullify the symbol file.
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
+	# Replace the output file specification.
+	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	$show "$link_command"
+	$run eval "$link_command"
+	status=$?
+	
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $status
+      fi
+
+      if test -n "$shlibpath_var"; then
+	# We should set the shlibpath_var
+	rpath=
+	for dir in $temp_rpath; do
+	  case "$dir" in
+	  [\\/]* | [A-Za-z]:[\\/]*)
+	    # Absolute path.
+	    rpath="$rpath$dir:"
+	    ;;
+	  *)
+	    # Relative path: add a thisdir entry.
+	    rpath="$rpath\$thisdir/$dir:"
+	    ;;
+	  esac
+	done
+	temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+	
+	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+	case "$0" in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+	esac
+	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
+	esac
+	$rm $output
+	trap "$rm $output; exit 1" 1 2 15
+
+	$echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  link_against_libtool_libs='$link_against_libtool_libs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  echo >> $output "\
+  program=lt-'$outputname'
+  progdir=\"\$thisdir/$objdir\"
+  
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+	  echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if (cd \"\$thisdir\" && eval \$relink_command); then :
+      else
+	$rm \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+	else
+	  echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	  # win32 systems need to use the prog path for dll
+	  # lookup to work
+	*-*-cygwin*)
+	  $echo >> $output "\
+      exec \$progdir/\$program \${1+\"\$@\"}
+"
+	  ;;
+
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2*)
+	  $echo >> $output "\
+      exec \$progdir\\\\\$program \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $echo >> $output "\
+      # Export the path to the program.
+      PATH=\"\$progdir:\$PATH\"
+      export PATH
+
+      exec \$program \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+	chmod +x $output
+      fi
+      exit 0
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	$show "${rm}r $gentop"
+	$run ${rm}r "$gentop"
+	$show "mkdir $gentop"
+	$run mkdir "$gentop"
+	status=$?
+	if test $status -ne 0 && test ! -d "$gentop"; then
+	  exit $status
+	fi
+	generated="$generated $gentop"
+	  
+	# Add in members from convenience archives.
+	for xlib in $addlibs; do
+	  # Extract the objects.
+	  case "$xlib" in
+	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+	  *) xabs=`pwd`"/$xlib" ;;
+	  esac
+	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+	  xdir="$gentop/$xlib"
+
+	  $show "${rm}r $xdir"
+	  $run ${rm}r "$xdir"
+	  $show "mkdir $xdir"
+	  $run mkdir "$xdir"
+	  status=$?
+	  if test $status -ne 0 && test ! -d "$xdir"; then
+	    exit $status
+	  fi
+	  $show "(cd $xdir && $AR x $xabs)"
+	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+
+	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+	done
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	eval cmds=\"$old_archive_from_new_cmds\"
+      else
+	# Ensure that we have .o objects in place in case we decided
+	# not to build a shared library, and have fallen back to building
+	# static libs even though --disable-static was passed!
+	for oldobj in $oldobjs; do
+	  if test ! -f $oldobj; then
+	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$oldobj"; then
+	      xdir="."
+	    else
+	      xdir="$xdir"
+	    fi
+	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
+	  fi
+	done
+
+	eval cmds=\"$old_archive_cmds\"
+      fi
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case "$output" in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      if test -n "$xrpath"; then
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	done
+	dependency_libs="$temp_xrpath $dependency_libs"
+      fi
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	  fi
+	  $rm $output
+	  $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$dlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'\
+"
+	done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
+      ;;
+    esac
+    exit 0
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg="$nonopt"
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case "$arg" in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest="$arg"
+	continue
+      fi
+
+      case "$arg" in
+      -d) isdir=yes ;;
+      -f) prev="-f" ;;
+      -g) prev="-g" ;;
+      -m) prev="-m" ;;
+      -o) prev="-o" ;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*) ;;
+
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest="$arg"
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	$echo "$modename: no file or destination specified" 1>&2
+      else
+	$echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test $# -gt 2; then
+	$echo "$modename: \`$dest' is not a directory" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+    fi
+    case "$destdir" in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case "$file" in
+	*.lo) ;;
+	*)
+	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case "$file" in
+      *.a | *.lib)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	library_names=
+	old_library=
+	# If there is no directory component, then add one.
+	case "$file" in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
+	test "X$dir" = "X$file/" && dir=
+	dir="$dir$objdir"
+
+	# See the names of the shared library.
+	set dummy $library_names
+	if test -n "$2"; then
+	  realname="$2"
+	  shift
+	  shift
+
+	  # Install the shared library and build the symlinks.
+	  $show "$install_prog $dir/$realname $destdir/$realname"
+	  $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
+
+	  if test $# -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    for linkname
+	    do
+	      if test "$linkname" != "$realname"; then
+		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+	      fi
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  eval cmds=\"$postinstall_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+	fi
+
+	# Install the pseudo-library for information purposes.
+	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	instname="$dir/$name"i
+	$show "$install_prog $instname $destdir/$name"
+	$run eval "$install_prog $instname $destdir/$name" || exit $?
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case "$destfile" in
+	*.lo)
+	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+	  ;;
+	*.o | *.obj)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	if test -n "$destfile"; then
+	  $show "$install_prog $file $destfile"
+	  $run eval "$install_prog $file $destfile" || exit $?
+	fi
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+	  $show "$install_prog $staticobj $staticdest"
+	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+	fi
+	exit 0
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  link_against_libtool_libs=
+	  relink_command=
+
+	  # If there is no directory component, then add one.
+	  case "$file" in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Check the variables that should have been set.
+	  if test -z "$link_against_libtool_libs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+	    exit 1
+	  fi
+
+	  finalize=yes
+	  for lib in $link_against_libtool_libs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      # If there is no directory component, then add one.
+	      case "$lib" in
+	      */* | *\\*) . $lib ;;
+	      *) . ./$lib ;;
+	      esac
+	    fi
+	    libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+	      finalize=no
+	    fi
+	  done
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir="/tmp"
+	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
+              tmpdir=`mktemp -d $tmpdir/libtool-XXXXXX 2> /dev/null`
+              if test $? = 0 ; then :
+              else
+                tmpdir="$tmpdir/libtool-$$"
+              fi
+	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+	      else
+		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+		continue
+	      fi
+	      outputname="$tmpdir/$file"
+	      # Replace the output file specification.
+	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	      $show "$relink_command"
+	      if $run eval "$relink_command"; then :
+	      else
+		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
+		continue
+	      fi
+	      file="$outputname"
+	    else
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+	    fi
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	$show "$install_prog$stripme $file $destfile"
+	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+	test -n "$outputname" && ${rm}r "$tmpdir"
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      # Do each command in the postinstall commands.
+      eval cmds=\"$old_postinstall_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec $SHELL $0 --finish$current_libdirs
+      exit 1
+    fi
+
+    exit 0
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  eval cmds=\"$finish_cmds\"
+	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+	  done
+	  IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = : && exit 0
+
+    echo "----------------------------------------------------------------------"
+    echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      echo "   $libdir"
+    done
+    echo
+    echo "If you ever happen to want to link against installed libraries"
+    echo "in a given directory, LIBDIR, you must either use libtool, and"
+    echo "specify the full pathname of the library, or use \`-LLIBDIR'"
+    echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    echo
+    echo "See any operating system documentation about shared libraries for"
+    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    echo "----------------------------------------------------------------------"
+    exit 0
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit 1
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+
+      dir=
+      case "$file" in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+	# If there is no directory component, then add one.
+	case "$file" in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit 1
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case "$file" in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case "$file" in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+        # Export the shlibpath_var.
+        eval "export $shlibpath_var"
+      fi
+
+      # Restore saved enviroment variables
+      if test "${save_LC_ALL+set}" = set; then
+	LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+	LANG="$save_LANG"; export LANG
+      fi
+
+      # Now actually exec the command.
+      eval "exec \$cmd$args"
+
+      $echo "$modename: cannot exec \$cmd$args"
+      exit 1
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+        eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+        $echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit 0
+    fi
+    ;;
+
+  # libtool uninstall mode
+  uninstall)
+    modename="$modename: uninstall"
+    rm="$nonopt"
+    files=
+
+    for arg
+    do
+      case "$arg" in
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$dir" = "X$file" && dir=.
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      rmfiles="$file"
+
+      case "$name" in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  . $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    rmfiles="$rmfiles $dir/$n"
+	  done
+	  test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
+
+	  $show "$rm $rmfiles"
+	  $run $rm $rmfiles
+
+	  if test -n "$library_names"; then
+	    # Do each command in the postuninstall commands.
+	    eval cmds=\"$postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+	  if test -n "$old_library"; then
+	    # Do each command in the old_postuninstall commands.
+	    eval cmds=\"$old_postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+	  # FIXME: should reinstall the best remaining shared library.
+	fi
+	;;
+
+      *.lo)
+	if test "$build_old_libs" = yes; then
+	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+	  rmfiles="$rmfiles $dir/$oldobj"
+	fi
+	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+	;;
+
+      *)
+	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+	;;
+      esac
+    done
+    exit 0
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+    ;;
+  esac
+
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$generic_help" 1>&2
+  exit 1
+fi # test -z "$show_help"
+
+# We need to display help for each of the modes.
+case "$mode" in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --version         print version information
+
+MODE must be one of the following:
+
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+  exit 0
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+		    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+		    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+		    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+  ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/mkinstalldirs b/mkinstalldirs
new file mode 100755
index 0000000..b488dda
--- /dev/null
+++ b/mkinstalldirs
@@ -0,0 +1,40 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id: mkinstalldirs,v 1.1 2002/12/16 14:54:34 jjako Exp $
+
+errstatus=0
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+        echo "mkdir $pathcomp"
+
+        mkdir "$pathcomp" || lasterr=$?
+
+        if test ! -d "$pathcomp"; then
+  	  errstatus=$lasterr
+        fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# mkinstalldirs ends here
diff --git a/po/Makefile.in b/po/Makefile.in
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/po/Makefile.in
diff --git a/src/Makefile.in b/src/Makefile.in
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/src/Makefile.in